Skip to contentSkip to conversation

igb: read flash with iomem=strict

PATCH New Loktionov 3 participants 4 messages Nov 12, 2019 – Nov 13, 2019

Subsystems (2)
lore
Share & tools
lore

Loktionov

#0 lore raw

PATCH 1/1 igb: read flash with iomem=strict

When Secure Boot is enabled access to the /dev/mem is forbidden for user-space applications and clients are reporting inability to use tools in Secure Boot Mode. The way to perform NVM update is to use igb driver. Currently 1G Linux Base Driver has API which allows only EEPROM access.
There is a need to extend IOCTL API to allow NVM and registers access.
These defines are necessary for NVM access functions.

---

drivers/net/ethernet/intel/igb/e1000_defines.h +32 -1
index d2e2c50..68dee6a 100644
@@ -481,6 +481,7 @@
 #define E1000_RAH_POOL_1 0x00040000
 
 /* Error Codes */
+#define E1000_SUCCESS      0
 #define E1000_ERR_NVM      1
 #define E1000_ERR_PHY      2
 #define E1000_ERR_CONFIG   3
@@ -800,6 +801,37 @@
 #define NVM_ETS_DATA_INDEX_SHIFT	8
 #define NVM_ETS_DATA_HTHRESH_MASK	0x00FF
 
+#define E1000_REGISTER_SET_SIZE		0x20000 /* CSR Size */
+#define E1000_FLA	0x0001C  /* Flash Access - RW */
+#define E1000_FLOP	0x0103C  /* FLASH Opcode Register */
+#define E1000_I350_BARCTRL		0x5BFC /* BAR ctrl reg */
+#define E1000_I350_DTXMXPKTSZ		0x355C /* Maximum sent packet size reg*/
+
+#define E1000_SRWR		0x12018
+#define E1000_EEC_REG		0x12010
+
+#define E1000_SHADOWINF		0x12068
+#define E1000_FLFWUPDATE	0x12108
+
+/* os dep */
+#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + 
+(reg)))
+
+#define E1000_READ_FLASH_REG8(a, reg) ( \
+	readb(READ_ONCE((a)->flash_address) + (reg)))
+
+#define E1000_WRITE_FLASH_REG(a, reg, value) ( \
+	writel((value), ((a)->flash_address + (reg))))
+
+#define E1000_READ_REG(x, y) igb_rd32(x, y) #define E1000_READ_REG8(h, 
+r) readb(READ_ONCE((h)->hw_addr) + (r))
+
+#define E1000_WRITE_REG(hw, reg, val) \ do { \
+	u8 __iomem *hw_addr = READ_ONCE((hw)->hw_addr); \
+	if (!E1000_REMOVED(hw_addr)) \
+		writel((val), &hw_addr[(reg)]); \
+} while (0)
+
 #define E1000_NVM_CFG_DONE_PORT_0  0x040000 /* MNG config cycle done */  #define E1000_NVM_CFG_DONE_PORT_1  0x080000 /* ...for second port */  #define E1000_NVM_CFG_DONE_PORT_2  0x100000 /* ...for third port */
--------------------------------------------------------------------
 

Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 | Kapital zakladowy 200.000 PLN.

Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by others is strictly prohibited.

#1 lore raw

PATCH 1/1 igb: read flash with iomem=strict

Quoted 9 lines · Aleksandr

When Secure Boot is enabled access to the /dev/mem is forbidden for user- space applications and clients are reporting inability to use tools in Secure Boot Mode. The way to perform NVM update is to use igb driver. Currently 1G Linux Base Driver has API which allows only EEPROM access. There is a need to extend IOCTL API to allow NVM and registers access. These defines are necessary for NVM access functions.

---

This patch only adds defines and macros which are not being used in the driver currently. It appears you are missing the code to actually use these defines. Your missing the changes that Adam made to igb_ethtool.c, which are currently being reviewed internally.

Since this is an incomplete patch, I will drop it from the queue and will await a v2 of the patch that has the complete changes needed in the driver.

Quoted 71 lines
drivers/net/ethernet/intel/igb/e1000_defines.h +6 -0
index d2e2c50..68dee6a 100644
@@ -481,6 +481,7 @@
 #define E1000_RAH_POOL_1 0x00040000
 
 /* Error Codes */
+#define E1000_SUCCESS      0
 #define E1000_ERR_NVM      1
 #define E1000_ERR_PHY      2
 #define E1000_ERR_CONFIG   3
@@ -800,6 +801,37 @@
 #define NVM_ETS_DATA_INDEX_SHIFT	8
 #define NVM_ETS_DATA_HTHRESH_MASK	0x00FF
 
+#define E1000_REGISTER_SET_SIZE		0x20000 /* CSR Size */
+#define E1000_FLA	0x0001C  /* Flash Access - RW */
+#define E1000_FLOP	0x0103C  /* FLASH Opcode Register */
+#define E1000_I350_BARCTRL		0x5BFC /* BAR ctrl reg */
+#define E1000_I350_DTXMXPKTSZ		0x355C /* Maximum sent

packet size reg*/

drivers/net/ethernet/intel/igb/e1000_defines.h +26 -0
+
+#define E1000_SRWR		0x12018
+#define E1000_EEC_REG		0x12010
+
+#define E1000_SHADOWINF		0x12068
+#define E1000_FLFWUPDATE	0x12108
+
+/* os dep */
+#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + 
+(reg)))
+
+#define E1000_READ_FLASH_REG8(a, reg) ( \
+	readb(READ_ONCE((a)->flash_address) + (reg)))
+
+#define E1000_WRITE_FLASH_REG(a, reg, value) ( \
+	writel((value), ((a)->flash_address + (reg))))
+
+#define E1000_READ_REG(x, y) igb_rd32(x, y) #define E1000_READ_REG8(h, 
+r) readb(READ_ONCE((h)->hw_addr) + (r))
+
+#define E1000_WRITE_REG(hw, reg, val) \ do { \
+	u8 __iomem *hw_addr = READ_ONCE((hw)->hw_addr); \
+	if (!E1000_REMOVED(hw_addr)) \
+		writel((val), &hw_addr[(reg)]); \
+} while (0)
+
 #define E1000_NVM_CFG_DONE_PORT_0  0x040000 /* MNG config cycle done
*/  #define E1000_NVM_CFG_DONE_PORT_1  0x080000 /* ...for second port
*/  #define E1000_NVM_CFG_DONE_PORT_2  0x100000 /* ...for third port */

--------------------------------------------------------------------

Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957- 07-52-316 | Kapital zakladowy 200.000 PLN.

Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek
przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by
others is strictly prohibited.

Quoted 4 lines

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan at osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part
URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20191112/f76a71f9/attachment-0001.asc>

#2 lore raw

PATCH 1/1 igb: read flash with iomem=strict

Quoted 11 lines · On Tue, 12 Nov 2019 11:05:38 -0800 Jeff wrote:
Quoted 9 lines · Aleksandr

When Secure Boot is enabled access to the /dev/mem is forbidden for user- space applications and clients are reporting inability to use tools in Secure Boot Mode. The way to perform NVM update is to use igb driver. Currently 1G Linux Base Driver has API which allows only EEPROM access. There is a need to extend IOCTL API to allow NVM and registers access. These defines are necessary for NVM access functions.

---

Quoted 7 lines

This patch only adds defines and macros which are not being used in the driver currently. It appears you are missing the code to actually use these defines. Your missing the changes that Adam made to igb_ethtool.c, which are currently being reviewed internally.

Since this is an incomplete patch, I will drop it from the queue and will await a v2 of the patch that has the complete changes needed in the driver.

Not only that, but this is the same code that was just rejected for the ice driver. I think we should NOT be trying to push this upstream, knowing that it will likely be rejected.

#3 lore raw

PATCH 1/1 igb: read flash with iomem=strict

-----Original Message-----
From: Jesse Brandeburg <[email protected]>
Sent: Tuesday, November 12, 2019 8:45 PM
To: Kirsher, Jeffrey T <[email protected]>
Cc: Loktionov, Aleksandr <[email protected]>; Michael, Alice <[email protected]>; intel-wired-lan at lists.osuosl.org; Ludkiewicz, Adam <[email protected]>; Brandeburg, Jesse <[email protected]>
Subject: Re: [Intel-wired-lan] [e1000-patches] [PATCH] igb: read flash with iomem=strict

Quoted 11 lines · On Tue, 12 Nov 2019 11:05:38 -0800 Jeff wrote:
Quoted 9 lines · Aleksandr

When Secure Boot is enabled access to the /dev/mem is forbidden for user- space applications and clients are reporting inability to use tools in Secure Boot Mode. The way to perform NVM update is to use igb driver. Currently 1G Linux Base Driver has API which allows only EEPROM access. There is a need to extend IOCTL API to allow NVM and registers access. These defines are necessary for NVM access functions.

---

Quoted 7 lines

This patch only adds defines and macros which are not being used in the driver currently. It appears you are missing the code to actually use these defines. Your missing the changes that Adam made to igb_ethtool.c, which are currently being reviewed internally.

Since this is an incomplete patch, I will drop it from the queue and will await a v2 of the patch that has the complete changes needed in the driver.

Not only that, but this is the same code that was just rejected for the ice driver. I think we should NOT be trying to push this upstream, knowing that it will likely be rejected.

But it's almost the same code tat was already accepted and upstreamed for ixbge.

--------------------------------------------------------------------

Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 | Kapital zakladowy 200.000 PLN.

Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by others is strictly prohibited.