Skip to contentSkip to conversation

bus: ti-sysc: Add module enable quirk for audio AESS

PATCH In review Tony Lindgren 2 participants 2 messages Nov 13, 2019 – Nov 14, 2019 OMAP2+ support

lore
Share & tools
lore

Tony Lindgren

author maintainer
#0 lore raw

PATCH 1/1 bus: ti-sysc: Add module enable quirk for audio AESS

We must set the autogating bit on enable for AESS (Audio Engine SubSystem) when probed with ti-sysc interconnect target module driver. Otherwise it won't idle properly.

---
 drivers/bus/ti-sysc.c                 | 14 +++++++++++++-
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 14 insertions(+), 1 deletion(-)
drivers/bus/ti-sysc.c +13 -1
@@ -1248,6 +1248,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_SWSUP_SIDLE),
 
 	/* Quirks that need to be set based on detected module */
+	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff,
+		   SYSC_MODULE_QUIRK_AESS),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
 		   SYSC_MODULE_QUIRK_HDQ1W),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
@@ -1276,7 +1278,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 #ifdef DEBUG
 	SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
 	SYSC_QUIRK("atl", 0, 0, -1, -1, 0x0a070100, 0xffffffff, 0),
-	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff, 0),
 	SYSC_QUIRK("cm", 0, 0, -1, -1, 0x40000301, 0xffffffff, 0),
 	SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
 	SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
@@ -1408,6 +1409,14 @@ static void sysc_clk_enable_quirk_hdq1w(struct sysc *ddata)
 	sysc_write(ddata, offset, val);
 }
 
+/* AESS (Audio Engine SubSystem) needs autogating set after enable */
+static void sysc_module_enable_quirk_aess(struct sysc *ddata)
+{
+	int offset = 0x7c;	/* AESS_AUTO_GATING_ENABLE */
+
+	sysc_write(ddata, offset, 1);
+}
+
 /* I2C needs extra enable bit toggling for reset */
 static void sysc_clk_quirk_i2c(struct sysc *ddata, bool enable)
 {
@@ -1490,6 +1499,9 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 	}
 
+	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_AESS)
+		ddata->module_enable_quirk = sysc_module_enable_quirk_aess;
+
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX)
 		ddata->module_enable_quirk = sysc_module_enable_quirk_sgx;
 
include/linux/platform_data/ti-sysc.h +1 -0
@@ -49,6 +49,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_MODULE_QUIRK_AESS		BIT(19)
 #define SYSC_MODULE_QUIRK_SGX		BIT(18)
 #define SYSC_MODULE_QUIRK_HDQ1W		BIT(17)
 #define SYSC_MODULE_QUIRK_I2C		BIT(16)
Signature · 1 line
2.23.0
Tested-by on v1 1/1
#1 lore raw
Quoted 10 lines · Tony Lindgren

We must set the autogating bit on enable for AESS (Audio Engine SubSystem) when probed with ti-sysc interconnect target module driver. Otherwise it won't idle properly.

---
 drivers/bus/ti-sysc.c                 | 14 +++++++++++++-
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 14 insertions(+), 1 deletion(-)
Quoted 50 lines
drivers/bus/ti-sysc.c +13 -1
@@ -1248,6 +1248,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_SWSUP_SIDLE),
 
 	/* Quirks that need to be set based on detected module */
+	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff,
+		   SYSC_MODULE_QUIRK_AESS),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
 		   SYSC_MODULE_QUIRK_HDQ1W),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
@@ -1276,7 +1278,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 #ifdef DEBUG
 	SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
 	SYSC_QUIRK("atl", 0, 0, -1, -1, 0x0a070100, 0xffffffff, 0),
-	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff, 0),
 	SYSC_QUIRK("cm", 0, 0, -1, -1, 0x40000301, 0xffffffff, 0),
 	SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
 	SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
@@ -1408,6 +1409,14 @@ static void sysc_clk_enable_quirk_hdq1w(struct sysc *ddata)
 	sysc_write(ddata, offset, val);
 }
 
+/* AESS (Audio Engine SubSystem) needs autogating set after enable */
+static void sysc_module_enable_quirk_aess(struct sysc *ddata)
+{
+	int offset = 0x7c;	/* AESS_AUTO_GATING_ENABLE */
+
+	sysc_write(ddata, offset, 1);
+}
+
 /* I2C needs extra enable bit toggling for reset */
 static void sysc_clk_quirk_i2c(struct sysc *ddata, bool enable)
 {
@@ -1490,6 +1499,9 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 	}
 
+	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_AESS)
+		ddata->module_enable_quirk = sysc_module_enable_quirk_aess;
+
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX)
 		ddata->module_enable_quirk = sysc_module_enable_quirk_sgx;
 

include/linux/platform_data/ti-sysc.h struct sysc_regbits { · line 55

Quoted 7 lines
include/linux/platform_data/ti-sysc.h +1 -0
@@ -49,6 +49,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_MODULE_QUIRK_AESS		BIT(19)
 #define SYSC_MODULE_QUIRK_SGX		BIT(18)
 #define SYSC_MODULE_QUIRK_HDQ1W		BIT(17)
 #define SYSC_MODULE_QUIRK_I2C		BIT(16)

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki