arm64: dts: allwinner: h6: Enable USB 3.0 host for Beelink GS1 and Tanix TX6
Subsystems (2)
PATCH 1/1 arm64: dts: allwinner: h6: Enable USB 3.0 host for Beelink GS1 and Tanix TX6
Enable USB 3.0 phy and host controller.
VBUS is directly connected to DCIN 5V and doesn't
require to be switched on.
Signed-off-by Clément Péron <[email protected]>
--- arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 8 ++++++++ arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 8 ++++++++ 2 files changed, 16 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +8 -0
@@ -76,6 +76,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; };
@@ -291,3 +295,7 @@ usb0_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +};
arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +8 -0
@@ -45,6 +45,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; };
@@ -102,3 +106,7 @@ &usb2phy { status = "okay"; }; + +&usb3phy { + status = "okay"; +};
Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Maxime Ripard
AppliedQuoted 6 lines · Clément Péron
Enable USB 3.0 phy and host controller.
VBUS is directly connected to DCIN 5V and doesn't
require to be switched on.Signed-off-by Clément Péron <[email protected]>
Queued for 5.6, thanks!
Maxime