Skip to contentSkip to conversation

drivers: ipmi: Support raw i2c packet in IPMB

PATCH Superseded Vijay Khemka 2 participants 3 messages Nov 14, 2019

Subsystems (2)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 drivers: ipmi: Support raw i2c packet in IPMB

Many IPMB devices doesn't support smbus protocol and current driver support only smbus devices. Added support for raw i2c packets.

User can define i2c-protocol in device tree to use i2c raw transfer.

---
 Documentation/IPMB.txt           |  4 ++++
 drivers/char/ipmi/ipmb_dev_int.c | 29 +++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)
Documentation/IPMB.txt +4 -0
index a6ed8b68bd0f..7a023beff976 100644
@@ -71,9 +71,13 @@ b) Example for device tree:
          ipmb at 10 {
                  compatible = "ipmb-dev";
                  reg = <0x10>;
+                 i2c-protocol;
          };
 };
 
+If xmit of data to be done using raw i2c block vs smbus
+then "i2c-protocol" needs to be defined as above.
+
 2) Manually from Linux:
 modprobe ipmb-dev-int
 
drivers/char/ipmi/ipmb_dev_int.c +29 -0
index ae3bfba27526..68a254c0dd92 100644
@@ -63,6 +63,7 @@ struct ipmb_dev {
 	spinlock_t lock;
 	wait_queue_head_t wait_queue;
 	struct mutex file_mutex;
+	bool is_i2c_protocol;
 };
 
 static inline struct ipmb_dev *to_ipmb_dev(struct file *file)
@@ -112,6 +113,25 @@ static ssize_t ipmb_read(struct file *file, char __user *buf, size_t count,
 	return ret < 0 ? ret : count;
 }
 
+static int ipmb_i2c_write(struct i2c_client *client, u8 *msg, u8 addr)
+{
+	struct i2c_msg i2c_msg;
+
+	/*
+	 * subtract 1 byte (rq_sa) from the length of the msg passed to
+	 * raw i2c_transfer
+	 */
+	i2c_msg.len = msg[IPMB_MSG_LEN_IDX] - 1;
+
+	/* Assign message to buffer except first 2 bytes (length and address) */
+	i2c_msg.buf = msg + 2;
+
+	i2c_msg.addr = addr;
+	i2c_msg.flags = client->flags & I2C_CLIENT_PEC;
+
+	return i2c_transfer(client->adapter, &i2c_msg, 1);
+}
+
 static ssize_t ipmb_write(struct file *file, const char __user *buf,
 			size_t count, loff_t *ppos)
 {
@@ -133,6 +153,12 @@ static ssize_t ipmb_write(struct file *file, const char __user *buf,
 	rq_sa = GET_7BIT_ADDR(msg[RQ_SA_8BIT_IDX]);
 	netf_rq_lun = msg[NETFN_LUN_IDX];
 
+	/* Check i2c block transfer vs smbus */
+	if (ipmb_dev->is_i2c_protocol) {
+		ret = ipmb_i2c_write(ipmb_dev->client, msg, rq_sa);
+		return (ret == 1) ? count : ret;
+	}
+
 	/*
 	 * subtract rq_sa and netf_rq_lun from the length of the msg passed to
 	 * i2c_smbus_xfer
@@ -302,6 +328,9 @@ static int ipmb_probe(struct i2c_client *client,
 	if (ret)
 		return ret;
 
+	ipmb_dev->is_i2c_protocol
+		= device_property_read_bool(&client->dev, "i2c-protocol");
+
 	ipmb_dev->client = client;
 	i2c_set_clientdata(client, ipmb_dev);
 	ret = i2c_slave_register(client, ipmb_slave_cb);
Signature · 1 line
2.17.1
Reviewed-by on v5 1/1
#1 lore raw

-----Original Message-----
From: Vijay Khemka <[email protected]>
Sent: Thursday, November 14, 2019 1:54 PM
To: Jonathan Corbet <[email protected]>; Corey Minyard <[email protected]>; Arnd Bergmann <[email protected]>; Greg Kroah-Hartman <[email protected]>; linux-doc at vger.kernel.org; linux-kernel at vger.kernel.org; openipmi-developer at lists.sourceforge.net
Cc: vijaykhemka at fb.com; cminyard at mvista.com; Asmaa Mnebhi <[email protected]>; joel at jms.id.au; linux-aspeed at lists.ozlabs.org; sdasari at fb.com
Subject: [PATCH v5] drivers: ipmi: Support raw i2c packet in IPMB

Many IPMB devices doesn't support smbus protocol and current driver support only smbus devices. Added support for raw i2c packets.

User can define i2c-protocol in device tree to use i2c raw transfer.

Asmaa >> It would be good if you can rephrase the above description as follows:
"The ipmb_dev_int driver only supports the smbus protocol at the moment. Add support for the i2c protocol as well. There will be a variable passed by the device tree or ACPI table which determines whether the protocol is i2c or smbus."

Or at least fix the following:
"Many IPMB devices doesn't" -> "Many IPMB devices don't" "current driver support" -> "current driver supports"

Besides my above comment:

---
 Documentation/IPMB.txt           |  4 ++++
 drivers/char/ipmi/ipmb_dev_int.c | 29 +++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)
Documentation/IPMB.txt +4 -0
@@ -71,9 +71,13 @@ b) Example for device tree:
          ipmb at 10 {
                  compatible = "ipmb-dev";
                  reg = <0x10>;
+                 i2c-protocol;
          };
 };
 
+If xmit of data to be done using raw i2c block vs smbus then 
+"i2c-protocol" needs to be defined as above.
+
 2) Manually from Linux:
 modprobe ipmb-dev-int
 
drivers/char/ipmi/ipmb_dev_int.c +1 -0
index ae3bfba27526..68a254c0dd92 100644
@@ -63,6 +63,7 @@ struct ipmb_dev {
 	spinlock_t lock;
 	wait_queue_head_t wait_queue;
 	struct mutex file_mutex;
+	bool is_i2c_protocol;
 };
 
 static inline struct ipmb_dev *to_ipmb_dev(struct file *file) @@ -112,6 +113,25 @@ static ssize_t ipmb_read(struct file *file, char __user *buf, size_t count,

return ret < 0 ? ret : count;
}

+static int ipmb_i2c_write(struct i2c_client *client, u8 *msg, u8 addr)
+{
+ struct i2c_msg i2c_msg;
+
+ /*
+ * subtract 1 byte (rq_sa) from the length of the msg passed to
+ * raw i2c_transfer
+ */
+ i2c_msg.len = msg[IPMB_MSG_LEN_IDX] - 1;
+
+ /* Assign message to buffer except first 2 bytes (length and address) */
+ i2c_msg.buf = msg + 2;
+
+ i2c_msg.addr = addr;
+ i2c_msg.flags = client->flags & I2C_CLIENT_PEC;
+
+ return i2c_transfer(client->adapter, &i2c_msg, 1); }
+
static ssize_t ipmb_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
@@ -133,6 +153,12 @@ static ssize_t ipmb_write(struct file *file, const char __user *buf,
rq_sa = GET_7BIT_ADDR(msg[RQ_SA_8BIT_IDX]);
netf_rq_lun = msg[NETFN_LUN_IDX];

+ /* Check i2c block transfer vs smbus */
+ if (ipmb_dev->is_i2c_protocol) {
+ ret = ipmb_i2c_write(ipmb_dev->client, msg, rq_sa);
+ return (ret == 1) ? count : ret;
+ }
+
/*
* subtract rq_sa and netf_rq_lun from the length of the msg passed to
* i2c_smbus_xfer
@@ -302,6 +328,9 @@ static int ipmb_probe(struct i2c_client *client,
if (ret)
return ret;

+ ipmb_dev->is_i2c_protocol
+ = device_property_read_bool(&client->dev, "i2c-protocol");
+
ipmb_dev->client = client; i2c_set_clientdata(client, ipmb_dev); ret = i2c_slave_register(client, ipmb_slave_cb);
--
2.17.1

#2 lore raw

Sure I will update commit message

?On 11/14/19, 1:41 PM, "Asmaa Mnebhi" <[email protected]> wrote:

    -----Original Message-----
    From: Vijay Khemka <[email protected]> 
    Sent: Thursday, November 14, 2019 1:54 PM
    To: Jonathan Corbet <[email protected]>; Corey Minyard <[email protected]>; Arnd Bergmann <[email protected]>; Greg Kroah-Hartman <[email protected]>; linux-doc at vger.kernel.org; linux-kernel at vger.kernel.org; openipmi-developer at lists.sourceforge.net
    Cc: vijaykhemka at fb.com; cminyard at mvista.com; Asmaa Mnebhi <[email protected]>; joel at jms.id.au; linux-aspeed at lists.ozlabs.org; sdasari at fb.com
    Subject: [PATCH v5] drivers: ipmi: Support raw i2c packet in IPMB
    
    Many IPMB devices doesn't support smbus protocol and current driver support only smbus devices. Added support for raw i2c packets.
    
    User can define i2c-protocol in device tree to use i2c raw transfer.
    
    Asmaa >> It would be good if you can rephrase the above description as follows:
    "The ipmb_dev_int driver only supports the smbus protocol at the moment. Add support for the i2c protocol as well. There will be a variable passed by the device tree or ACPI table which determines whether the protocol is i2c or smbus."
    
    Or at least fix the following: 
    "Many IPMB devices doesn't" -> "Many IPMB devices don't"
    "current driver support" -> "current driver supports"
    
    Besides my above comment:
    Reviewed-by: Asmaa Mnebhi <[email protected]>
    
    Signed-off-by: Vijay Khemka <[email protected]>
    ---
     Documentation/IPMB.txt           |  4 ++++
     drivers/char/ipmi/ipmb_dev_int.c | 29 +++++++++++++++++++++++++++++
     2 files changed, 33 insertions(+)
    
    diff --git a/Documentation/IPMB.txt b/Documentation/IPMB.txt index a6ed8b68bd0f..7a023beff976 100644
    --- a/Documentation/IPMB.txt
    +++ b/Documentation/IPMB.txt
    @@ -71,9 +71,13 @@ b) Example for device tree:
              ipmb at 10 {
                      compatible = "ipmb-dev";
                      reg = <0x10>;
    +                 i2c-protocol;
              };
     };
     
    +If xmit of data to be done using raw i2c block vs smbus then 
    +"i2c-protocol" needs to be defined as above.
    +
     2) Manually from Linux:
     modprobe ipmb-dev-int
     
    diff --git a/drivers/char/ipmi/ipmb_dev_int.c b/drivers/char/ipmi/ipmb_dev_int.c
    index ae3bfba27526..68a254c0dd92 100644
    --- a/drivers/char/ipmi/ipmb_dev_int.c
    +++ b/drivers/char/ipmi/ipmb_dev_int.c
    @@ -63,6 +63,7 @@ struct ipmb_dev {
     	spinlock_t lock;
     	wait_queue_head_t wait_queue;
     	struct mutex file_mutex;
    +	bool is_i2c_protocol;
     };
     
     static inline struct ipmb_dev *to_ipmb_dev(struct file *file) @@ -112,6 +113,25 @@ static ssize_t ipmb_read(struct file *file, char __user *buf, size_t count,
     	return ret < 0 ? ret : count;
     }
     
    +static int ipmb_i2c_write(struct i2c_client *client, u8 *msg, u8 addr) 
    +{
    +	struct i2c_msg i2c_msg;
    +
    +	/*
    +	 * subtract 1 byte (rq_sa) from the length of the msg passed to
    +	 * raw i2c_transfer
    +	 */
    +	i2c_msg.len = msg[IPMB_MSG_LEN_IDX] - 1;
    +
    +	/* Assign message to buffer except first 2 bytes (length and address) */
    +	i2c_msg.buf = msg + 2;
    +
    +	i2c_msg.addr = addr;
    +	i2c_msg.flags = client->flags & I2C_CLIENT_PEC;
    +
    +	return i2c_transfer(client->adapter, &i2c_msg, 1); }
    +
     static ssize_t ipmb_write(struct file *file, const char __user *buf,
     			size_t count, loff_t *ppos)
     {
    @@ -133,6 +153,12 @@ static ssize_t ipmb_write(struct file *file, const char __user *buf,
     	rq_sa = GET_7BIT_ADDR(msg[RQ_SA_8BIT_IDX]);
     	netf_rq_lun = msg[NETFN_LUN_IDX];
     
    +	/* Check i2c block transfer vs smbus */
    +	if (ipmb_dev->is_i2c_protocol) {
    +		ret = ipmb_i2c_write(ipmb_dev->client, msg, rq_sa);
    +		return (ret == 1) ? count : ret;
    +	}
    +
     	/*
     	 * subtract rq_sa and netf_rq_lun from the length of the msg passed to
     	 * i2c_smbus_xfer
    @@ -302,6 +328,9 @@ static int ipmb_probe(struct i2c_client *client,
     	if (ret)
     		return ret;
     
    +	ipmb_dev->is_i2c_protocol
    +		= device_property_read_bool(&client->dev, "i2c-protocol");
    +
     	ipmb_dev->client = client;
     	i2c_set_clientdata(client, ipmb_dev);
     	ret = i2c_slave_register(client, ipmb_slave_cb);
    --
    2.17.1