mac80211: Drop the packets whose source or destination mac address is empty
PATCH v2 1/1 mac80211: Drop the packets whose source or destination mac address is empty
We occasionally found ath9k could receive some packets from Linux IP stack with empty source and destination mac address,which will result in the driver cannot find the station node in TX complete. And thus, the driver will complete this buffer but without updating the block ack window.
To fix this issue, we should drop this kind of error packet before it goes into the driver.
---
According to review feedback, use the is_zero_ether_addr to check if the mac address is empty.
--- net/mac80211/tx.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
net/mac80211/tx.c +12 -0
@@ -2489,6 +2489,13 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,if (IS_ERR (sta)) sta =NULL ; +/* drop this skb when source mac or destination mac is empty */ +if (is_zero_ether_addr (skb->data) || +is_zero_ether_addr (skb->data +ETH_ALEN )) { + ret = -ENOTCONN ; + goto free; + } +#ifdef CONFIG_MAC80211_DEBUGFS if (local->force_tx_status) info_flags |=IEEE80211_TX_CTL_REQ_TX_STATUS ;
@@ -3435,6 +3442,11 @@ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,if (skb->sk &&skb_shinfo (skb)->tx_flags &SKBTX_WIFI_STATUS )return false; +/* drop this skb when source mac or destination mac is empty */ +if (is_zero_ether_addr (skb->data) || +is_zero_ether_addr (skb->data +ETH_ALEN )) +return false; +if (hdr->frame_control &cpu_to_le16 (IEEE80211_STYPE_QOS_DATA )) { tid = skb->priority &IEEE80211_QOS_CTL_TAG1D_MASK ; tid_tx =rcu_dereference (sta->ampdu_mlme.tid_tx[tid]);
Signature · 1 line
2.17.1
Quoted 7 lines · Ming Chen
We occasionally found ath9k could receive some packets from Linux IP stack with empty source and destination mac address,which will result in the driver cannot find the station node in TX complete. And thus, the driver will complete this buffer but without updating the block ack window.
To fix this issue, we should drop this kind of error packet before it goes into the driver.
The s-o-b line should be here, before the "---" line.
Quoted 4 lines
---
According to review feedback, use the
is_zero_ether_addrto check if the mac address is empty.
Very good that you added the changelog, but to make it more obvious you could, for example, mark the changelog like this:
---
v3:
Fix s-o-b location
v2:
According to review feedback, use the is_zero_ether_addr to check if the mac address is empty.
Signature · 1 line
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Thanks for your careful review, Kalle.
I updated v3 with regards to your comments.
Ming
-----Original Message-----
From: Kalle Valo <[email protected]>
Sent: Thursday, November 14, 2019 11:16 PM
To: Ming Chen <[email protected]>
Cc: Johannes Berg <[email protected]>; [email protected]; Ming Chen <[email protected]>
Subject: Re: [PATCH v2] mac80211: Drop the packets whose source or destination mac address is empty
Quoted 7 lines · Ming Chen
We occasionally found ath9k could receive some packets from Linux IP stack with empty source and destination mac address,which will result in the driver cannot find the station node in TX complete. And thus, the driver will complete this buffer but without updating the block ack window.
To fix this issue, we should drop this kind of error packet before it goes into the driver.
The s-o-b line should be here, before the "---" line.
Quoted 4 lines
---
According to review feedback, use the
is_zero_ether_addrto check if the mac address is empty.
Very good that you added the changelog, but to make it more obvious you could, for example, mark the changelog like this:
---
v3:
Fix s-o-b location
v2:
According to review feedback, use the is_zero_ether_addr to check if the mac address is empty.
--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches