Skip to contentSkip to conversation

perf tools: Add support for AUX area sampling

PATCH Applied Adrian Hunter 3 participants 35 messages Nov 15, 2019 – Nov 23, 2019 perf events

lore
Share & tools
lore

Adrian Hunter

author reviewer
#0 lore raw

cover perf tools: Add support for AUX area sampling

Hi

The kernel changes for AUX area sampling are now in tip, so here are the tools' patches.

AUX area sampling allows bytes from a AUX area buffer to be copied onto samples of other events.

Here is the Intel PT documentation from patch "perf intel-pt: Add support for recording AUX area":

perf record AUX area sampling option
------------------------

To select Intel PT "sampling" the AUX area sampling option can be used:

--aux-sample

Optionally it can be followed by the sample size in bytes e.g.

--aux-sample=8192

In addition, the Intel PT event to sample must be defined e.g.

-e intel_pt//u

Samples on other events will be created containing Intel PT data e.g. the following will create Intel PT samples on the branch-misses event, note the events must be grouped using {}:

  	perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'

An alternative to '--aux-sample' is to add the config term 'aux-sample-size' to events. In this case, the grouping is implied e.g.

perf record -e intel_pt//u -e branch-misses/aux-sample-size=8192/u

is the same as:

perf record -e '{intel_pt//u,branch-misses/aux-sample-size=8192/u}'

but allows for also using an address filter e.g.:

  	perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls

It is important to select a sample size that is big enough to contain at least one PSB packet. If not a warning will be displayed:

Intel PT sample size (%zu) may be too small for PSB period (%zu)

The calculation used for that is: if sample_size <= psb_period + 256 display the warning. When sampling is used, psb_period defaults to 0 (2KiB).

The default sample size is 4KiB.

The sample size is passed in aux_sample_size in struct perf_event_attr. The sample size is limited by the maximum event size which is 64KiB. It is difficult to know how big the event might be without the trace sample attached, but the tool validates that the sample size is not greater than 60KiB.

Adrian Hunter (15):
perf tools: Add kernel AUX area sampling definitions
perf tools: Add AUX area sample parsing
perf tools: Add a function to test for kernel support for AUX area sampling perf auxtrace: Move perf_evsel__find_pmu()
perf auxtrace: Add support for AUX area sample recording
perf record: Add support for AUX area sampling
perf record: Add aux-sample-size config term
perf inject: Cut AUX area samples
perf auxtrace: Add support for dumping AUX area samples
perf session: Add facility to peek at all events
perf auxtrace: Add support for queuing AUX area samples
perf pmu: When using default config, record which bits of config were changed by the user perf intel-pt: Add support for recording AUX area samples
perf intel-pt: Add support for decoding AUX area samples
perf intel-bts: Does not support AUX area sampling

 tools/include/uapi/linux/perf_event.h     |  10 +-
 tools/perf/Documentation/intel-pt.txt     |  59 +++++-
 tools/perf/Documentation/perf-record.txt  |   9 +
 tools/perf/arch/x86/util/auxtrace.c       |   4 +
 tools/perf/arch/x86/util/intel-bts.c      |   5 +
 tools/perf/arch/x86/util/intel-pt.c       |  81 +++++++-
 tools/perf/builtin-inject.c               |  29 +++
 tools/perf/builtin-record.c               |  21 +-
 tools/perf/tests/attr/base-record         |   2 +-
 tools/perf/tests/attr/base-stat           |   2 +-
 tools/perf/tests/sample-parsing.c         |  16 +-
 tools/perf/util/auxtrace.c                | 322 ++++++++++++++++++++++++++++--
 tools/perf/util/auxtrace.h                |  42 ++++
 tools/perf/util/event.h                   |   6 +
 tools/perf/util/evlist.h                  |   1 +
 tools/perf/util/evsel.c                   |  31 +++
 tools/perf/util/evsel_config.h            |  13 ++
 tools/perf/util/intel-pt.c                | 109 +++++++++-
 tools/perf/util/parse-events.c            |  56 +++++-
 tools/perf/util/parse-events.h            |   1 +
 tools/perf/util/parse-events.l            |   1 +
 tools/perf/util/perf_event_attr_fprintf.c |   3 +-
 tools/perf/util/pmu.c                     |  10 +
 tools/perf/util/pmu.h                     |   2 +
 tools/perf/util/record.c                  |  30 +++
 tools/perf/util/record.h                  |   2 +
 tools/perf/util/session.c                 |  38 +++-
 tools/perf/util/session.h                 |   5 +
 tools/perf/util/synthetic-events.c        |  12 ++
 29 files changed, 894 insertions(+), 28 deletions(-)

Regards
Adrian

author reviewer
#1 lore raw

PATCH 1/15 perf tools: Add kernel AUX area sampling definitions

Add kernel AUX area sampling definitions, which brings perf_event.h into line with the kernel version.

New sample type PERF_SAMPLE_AUX requests a sample of the AUX area buffer. New perf_event_attr member 'aux_sample_size' specifies the desired size of the sample.

---
 tools/include/uapi/linux/perf_event.h     | 10 ++++++++--
 tools/perf/tests/attr/base-record         |  2 +-
 tools/perf/tests/attr/base-stat           |  2 +-
 tools/perf/util/perf_event_attr_fprintf.c |  1 +
 tools/perf/util/session.c                 |  1 +
 5 files changed, 12 insertions(+), 4 deletions(-)
tools/include/uapi/linux/perf_event.h +8 -2
index bb7b271397a6..377d794d3105 100644
@@ -141,8 +141,9 @@ enum perf_event_sample_format {
 	PERF_SAMPLE_TRANSACTION			= 1U << 17,
 	PERF_SAMPLE_REGS_INTR			= 1U << 18,
 	PERF_SAMPLE_PHYS_ADDR			= 1U << 19,
+	PERF_SAMPLE_AUX				= 1U << 20,
 
-	PERF_SAMPLE_MAX = 1U << 20,		/* non-ABI */
+	PERF_SAMPLE_MAX = 1U << 21,		/* non-ABI */
 
 	__PERF_SAMPLE_CALLCHAIN_EARLY		= 1ULL << 63, /* non-ABI; internal use */
 };
@@ -300,6 +301,7 @@ enum perf_event_read_format {
 					/* add: sample_stack_user */
 #define PERF_ATTR_SIZE_VER4	104	/* add: sample_regs_intr */
 #define PERF_ATTR_SIZE_VER5	112	/* add: aux_watermark */
+#define PERF_ATTR_SIZE_VER6	120	/* add: aux_sample_size */
 
 /*
  * Hardware event_id to monitor via a performance monitoring event:
@@ -424,7 +426,9 @@ struct perf_event_attr {
 	 */
 	__u32	aux_watermark;
 	__u16	sample_max_stack;
-	__u16	__reserved_2;	/* align to __u64 */
+	__u16	__reserved_2;
+	__u32	aux_sample_size;
+	__u32	__reserved_3;
 };
 
 /*
@@ -864,6 +868,8 @@ enum perf_event_type {
 	 *	{ u64			abi; # enum perf_sample_regs_abi
 	 *	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR
 	 *	{ u64			phys_addr;} && PERF_SAMPLE_PHYS_ADDR
+	 *	{ u64			size;
+	 *	  char			data[size]; } && PERF_SAMPLE_AUX
 	 * };
 	 */
 	PERF_RECORD_SAMPLE			= 9,
tools/perf/tests/attr/base-record +1 -1
index efd0157b9d22..645009c08b3c 100644
@@ -5,7 +5,7 @@ group_fd=-1
 flags=0|8
 cpu=*
 type=0|1
-size=112
+size=120
 config=0
 sample_period=*
 sample_type=263
tools/perf/tests/attr/base-stat +1 -1
index 4d0c2e42b64e..b0f42c34882e 100644
@@ -5,7 +5,7 @@ group_fd=-1
 flags=0|8
 cpu=*
 type=0
-size=112
+size=120
 config=0
 sample_period=0
 sample_type=65536
tools/perf/util/perf_event_attr_fprintf.c +1 -0
index d4ad3f04923a..06add607e72d 100644
@@ -143,6 +143,7 @@ int perf_event_attr__fprintf(FILE *fp, struct perf_event_attr *attr,
 	PRINT_ATTRf(sample_regs_intr, p_hex);
 	PRINT_ATTRf(aux_watermark, p_unsigned);
 	PRINT_ATTRf(sample_max_stack, p_unsigned);
+	PRINT_ATTRf(aux_sample_size, p_unsigned);
 
 	return ret;
 }
tools/perf/util/session.c +1 -0
index f07b8ecb91bc..eb7ffd5524dc 100644
@@ -752,6 +752,7 @@ do { 						\
 	bswap_field_32(sample_stack_user);
 	bswap_field_32(aux_watermark);
 	bswap_field_16(sample_max_stack);
+	bswap_field_32(aux_sample_size);
 
 	/*
 	 * After read_format are bitfields. Check read_format because
Signature · 1 line
2.17.1
Tested-by on v1 1/15
#2 lore raw

Re: [PATCH 01/15] perf tools: Add kernel AUX area sampling definitions

Em Fri, Nov 15, 2019 at 02:42:11PM +0200, Adrian Hunter escreveu:

Quoted 6 lines

Add kernel AUX area sampling definitions, which brings perf_event.h into line with the kernel version.

New sample type PERF_SAMPLE_AUX requests a sample of the AUX area buffer. New perf_event_attr member 'aux_sample_size' specifies the desired size of the sample.

I squashed the first two patches in this series and added this note:

Committer notes:

I squashed the first two patches in this series to avoid breaking automatic bisection, i.e. after applying only the original first patch in this series we would have:

  # perf test -v parsing
  26: Sample parsing                                        :
  --- start ---
  test child forked, pid 17018
  sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating
  test child finished with -1
  ---- end ----
  Sample parsing: FAILED!
  #

With the two paches combined:

  # perf test parsing
  26: Sample parsing                                        : Ok
  #
Quoted 104 lines
---
 tools/include/uapi/linux/perf_event.h     | 10 ++++++++--
 tools/perf/tests/attr/base-record         |  2 +-
 tools/perf/tests/attr/base-stat           |  2 +-
 tools/perf/util/perf_event_attr_fprintf.c |  1 +
 tools/perf/util/session.c                 |  1 +
 5 files changed, 12 insertions(+), 4 deletions(-)
tools/include/uapi/linux/perf_event.h +8 -2
index bb7b271397a6..377d794d3105 100644
@@ -141,8 +141,9 @@ enum perf_event_sample_format {
 	PERF_SAMPLE_TRANSACTION			= 1U << 17,
 	PERF_SAMPLE_REGS_INTR			= 1U << 18,
 	PERF_SAMPLE_PHYS_ADDR			= 1U << 19,
+	PERF_SAMPLE_AUX				= 1U << 20,
 
-	PERF_SAMPLE_MAX = 1U << 20,		/* non-ABI */
+	PERF_SAMPLE_MAX = 1U << 21,		/* non-ABI */
 
 	__PERF_SAMPLE_CALLCHAIN_EARLY		= 1ULL << 63, /* non-ABI; internal use */
 };
@@ -300,6 +301,7 @@ enum perf_event_read_format {
 					/* add: sample_stack_user */
 #define PERF_ATTR_SIZE_VER4	104	/* add: sample_regs_intr */
 #define PERF_ATTR_SIZE_VER5	112	/* add: aux_watermark */
+#define PERF_ATTR_SIZE_VER6	120	/* add: aux_sample_size */
 
 /*
  * Hardware event_id to monitor via a performance monitoring event:
@@ -424,7 +426,9 @@ struct perf_event_attr {
 	 */
 	__u32	aux_watermark;
 	__u16	sample_max_stack;
-	__u16	__reserved_2;	/* align to __u64 */
+	__u16	__reserved_2;
+	__u32	aux_sample_size;
+	__u32	__reserved_3;
 };
 
 /*
@@ -864,6 +868,8 @@ enum perf_event_type {
 	 *	{ u64			abi; # enum perf_sample_regs_abi
 	 *	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR
 	 *	{ u64			phys_addr;} && PERF_SAMPLE_PHYS_ADDR
+	 *	{ u64			size;
+	 *	  char			data[size]; } && PERF_SAMPLE_AUX
 	 * };
 	 */
 	PERF_RECORD_SAMPLE			= 9,
tools/perf/tests/attr/base-record +1 -1
index efd0157b9d22..645009c08b3c 100644
@@ -5,7 +5,7 @@ group_fd=-1
 flags=0|8
 cpu=*
 type=0|1
-size=112
+size=120
 config=0
 sample_period=*
 sample_type=263
tools/perf/tests/attr/base-stat +1 -1
index 4d0c2e42b64e..b0f42c34882e 100644
@@ -5,7 +5,7 @@ group_fd=-1
 flags=0|8
 cpu=*
 type=0
-size=112
+size=120
 config=0
 sample_period=0
 sample_type=65536
tools/perf/util/perf_event_attr_fprintf.c +1 -0
index d4ad3f04923a..06add607e72d 100644
@@ -143,6 +143,7 @@ int perf_event_attr__fprintf(FILE *fp, struct perf_event_attr *attr,
 	PRINT_ATTRf(sample_regs_intr, p_hex);
 	PRINT_ATTRf(aux_watermark, p_unsigned);
 	PRINT_ATTRf(sample_max_stack, p_unsigned);
+	PRINT_ATTRf(aux_sample_size, p_unsigned);
 
 	return ret;
 }
tools/perf/util/session.c +1 -0
index f07b8ecb91bc..eb7ffd5524dc 100644
@@ -752,6 +752,7 @@ do { 						\
 	bswap_field_32(sample_stack_user);
 	bswap_field_32(aux_watermark);
 	bswap_field_16(sample_max_stack);
+	bswap_field_32(aux_sample_size);
 
 	/*
 	 * After read_format are bitfields. Check read_format because
Signature · 1 line
2.17.1
Signature · 1 line
- Arnaldo
author reviewer
#3 lore raw

PATCH 2/15 perf tools: Add AUX area sample parsing

In reply to Adrian Hunter

Add support for parsing samples containing AUX area data i.e. PERF_SAMPLE_AUX.

---
 tools/perf/tests/sample-parsing.c         | 16 +++++++++++++++-
 tools/perf/util/event.h                   |  6 ++++++
 tools/perf/util/evsel.c                   | 13 +++++++++++++
 tools/perf/util/perf_event_attr_fprintf.c |  2 +-
 tools/perf/util/synthetic-events.c        | 12 ++++++++++++
 5 files changed, 47 insertions(+), 2 deletions(-)
tools/perf/tests/sample-parsing.c +15 -1
index 3a02426db9a6..2762e1155238 100644
@@ -150,6 +150,15 @@ static bool samples_same(const struct perf_sample *s1,
 	if (type & PERF_SAMPLE_PHYS_ADDR)
 		COMP(phys_addr);
 
+	if (type & PERF_SAMPLE_AUX) {
+		COMP(aux_sample.size);
+		if (memcmp(s1->aux_sample.data, s2->aux_sample.data,
+			   s1->aux_sample.size)) {
+			pr_debug("Samples differ at 'aux_sample'\n");
+			return false;
+		}
+	}
+
 	return true;
 }
 
@@ -182,6 +191,7 @@ static int do_test(u64 sample_type, u64 sample_regs, u64 read_format)
 	u64 regs[64];
 	const u64 raw_data[] = {0x123456780a0b0c0dULL, 0x1102030405060708ULL};
 	const u64 data[] = {0x2211443366558877ULL, 0, 0xaabbccddeeff4321ULL};
+	const u64 aux_data[] = {0xa55a, 0, 0xeeddee, 0x0282028202820282};
 	struct perf_sample sample = {
 		.ip		= 101,
 		.pid		= 102,
@@ -218,6 +228,10 @@ static int do_test(u64 sample_type, u64 sample_regs, u64 read_format)
 			.regs	= regs,
 		},
 		.phys_addr	= 113,
+		.aux_sample	= {
+			.size	= sizeof(aux_data),
+			.data	= (void *)aux_data,
+		},
 	};
 	struct sample_read_value values[] = {{1, 5}, {9, 3}, {2, 7}, {6, 4},};
 	struct perf_sample sample_out;
@@ -317,7 +331,7 @@ int test__sample_parsing(struct test *test __maybe_unused, int subtest __maybe_u
 	 * were added.  Please actually update the test rather than just change
 	 * the condition below.
 	 */
-	if (PERF_SAMPLE_MAX > PERF_SAMPLE_PHYS_ADDR << 1) {
+	if (PERF_SAMPLE_MAX > PERF_SAMPLE_AUX << 1) {
 		pr_debug("sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating\n");
 		return -1;
 	}
tools/perf/util/event.h +6 -0
index a0a0c91cde4a..85223159737c 100644
@@ -114,6 +114,11 @@ enum {
 
 #define MAX_INSN 16
 
+struct aux_sample {
+	u64 size;
+	void *data;
+};
+
 struct perf_sample {
 	u64 ip;
 	u32 pid, tid;
@@ -142,6 +147,7 @@ struct perf_sample {
 	struct regs_dump  intr_regs;
 	struct stack_dump user_stack;
 	struct sample_read read;
+	struct aux_sample aux_sample;
 };
 
 #define PERF_MEM_DATA_SRC_NONE \
tools/perf/util/evsel.c +13 -0
index 1bf60f325608..772f4879c492 100644
@@ -2209,6 +2209,19 @@ int perf_evsel__parse_sample(struct evsel *evsel, union perf_event *event,
 		array++;
 	}
 
+	if (type & PERF_SAMPLE_AUX) {
+		OVERFLOW_CHECK_u64(array);
+		sz = *array++;
+
+		OVERFLOW_CHECK(array, sz, max_size);
+		/* Undo swap of data */
+		if (swapped)
+			mem_bswap_64((char *)array, sz);
+		data->aux_sample.size = sz;
+		data->aux_sample.data = (char *)array;
+		array = (void *)array + sz;
+	}
+
 	return 0;
 }
 
tools/perf/util/perf_event_attr_fprintf.c +1 -1
index 06add607e72d..651203126c71 100644
@@ -34,7 +34,7 @@ static void __p_sample_type(char *buf, size_t size, u64 value)
 		bit_name(PERIOD), bit_name(STREAM_ID), bit_name(RAW),
 		bit_name(BRANCH_STACK), bit_name(REGS_USER), bit_name(STACK_USER),
 		bit_name(IDENTIFIER), bit_name(REGS_INTR), bit_name(DATA_SRC),
-		bit_name(WEIGHT), bit_name(PHYS_ADDR),
+		bit_name(WEIGHT), bit_name(PHYS_ADDR), bit_name(AUX),
 		{ .name = NULL, }
 	};
 #undef bit_name
tools/perf/util/synthetic-events.c +12 -0
index cfa3c9f67141..48c3f8b9c852 100644
@@ -1228,6 +1228,11 @@ size_t perf_event__sample_event_size(const struct perf_sample *sample, u64 type,
 	if (type & PERF_SAMPLE_PHYS_ADDR)
 		result += sizeof(u64);
 
+	if (type & PERF_SAMPLE_AUX) {
+		result += sizeof(u64);
+		result += sample->aux_sample.size;
+	}
+
 	return result;
 }
 
@@ -1396,6 +1401,13 @@ int perf_event__synthesize_sample(union perf_event *event, u64 type, u64 read_fo
 		array++;
 	}
 
+	if (type & PERF_SAMPLE_AUX) {
+		sz = sample->aux_sample.size;
+		*array++ = sz;
+		memcpy(array, sample->aux_sample.data, sz);
+		array = (void *)array + sz;
+	}
+
 	return 0;
 }
 
Signature · 1 line
2.17.1
merge bot Applied
#4 lore raw

[tip: perf/core] perf tools: Add kernel AUX area sampling definitions

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     98dcf14d7f9c9482144b9015d481bf6b63bce965
Gitweb:        https://git.kernel.org/tip/98dcf14d7f9c9482144b9015d481bf6b63bce965
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:11 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Thu, 21 Nov 2019 10:54:20 -03:00

perf tools: Add kernel AUX area sampling definitions

Add kernel AUX area sampling definitions, which brings perf_event.h into line with the kernel version.

New sample type PERF_SAMPLE_AUX requests a sample of the AUX area buffer. New perf_event_attr member 'aux_sample_size' specifies the desired size of the sample.

Also add support for parsing samples containing AUX area data i.e. PERF_SAMPLE_AUX.

Committer notes:

I squashed the first two patches in this series to avoid breaking automatic bisection, i.e. after applying only the original first patch in this series we would have:

  # perf test -v parsing
  26: Sample parsing                                        :
  --- start ---
  test child forked, pid 17018
  sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating
  test child finished with -1
  ---- end ----
  Sample parsing: FAILED!
  #

With the two paches combined:

  # perf test parsing
  26: Sample parsing                                        : Ok
  #
---
 tools/include/uapi/linux/perf_event.h     | 10 ++++++++--
 tools/perf/tests/attr/base-record         |  2 +-
 tools/perf/tests/attr/base-stat           |  2 +-
 tools/perf/tests/sample-parsing.c         | 16 +++++++++++++++-
 tools/perf/util/event.h                   |  6 ++++++
 tools/perf/util/evsel.c                   | 13 +++++++++++++
 tools/perf/util/perf_event_attr_fprintf.c |  3 ++-
 tools/perf/util/session.c                 |  1 +
 tools/perf/util/synthetic-events.c        | 12 ++++++++++++
 9 files changed, 59 insertions(+), 6 deletions(-)
tools/include/uapi/linux/perf_event.h +8 -2
index bb7b271..377d794 100644
@@ -141,8 +141,9 @@ enum perf_event_sample_format {
 	PERF_SAMPLE_TRANSACTION			= 1U << 17,
 	PERF_SAMPLE_REGS_INTR			= 1U << 18,
 	PERF_SAMPLE_PHYS_ADDR			= 1U << 19,
+	PERF_SAMPLE_AUX				= 1U << 20,
 
-	PERF_SAMPLE_MAX = 1U << 20,		/* non-ABI */
+	PERF_SAMPLE_MAX = 1U << 21,		/* non-ABI */
 
 	__PERF_SAMPLE_CALLCHAIN_EARLY		= 1ULL << 63, /* non-ABI; internal use */
 };
@@ -300,6 +301,7 @@ enum perf_event_read_format {
 					/* add: sample_stack_user */
 #define PERF_ATTR_SIZE_VER4	104	/* add: sample_regs_intr */
 #define PERF_ATTR_SIZE_VER5	112	/* add: aux_watermark */
+#define PERF_ATTR_SIZE_VER6	120	/* add: aux_sample_size */
 
 /*
  * Hardware event_id to monitor via a performance monitoring event:
@@ -424,7 +426,9 @@ struct perf_event_attr {
 	 */
 	__u32	aux_watermark;
 	__u16	sample_max_stack;
-	__u16	__reserved_2;	/* align to __u64 */
+	__u16	__reserved_2;
+	__u32	aux_sample_size;
+	__u32	__reserved_3;
 };
 
 /*
@@ -864,6 +868,8 @@ enum perf_event_type {
 	 *	{ u64			abi; # enum perf_sample_regs_abi
 	 *	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR
 	 *	{ u64			phys_addr;} && PERF_SAMPLE_PHYS_ADDR
+	 *	{ u64			size;
+	 *	  char			data[size]; } && PERF_SAMPLE_AUX
 	 * };
 	 */
 	PERF_RECORD_SAMPLE			= 9,
tools/perf/tests/attr/base-record +1 -1
index efd0157..645009c 100644
@@ -5,7 +5,7 @@ group_fd=-1
 flags=0|8
 cpu=*
 type=0|1
-size=112
+size=120
 config=0
 sample_period=*
 sample_type=263
tools/perf/tests/attr/base-stat +1 -1
index 4d0c2e4..b0f42c3 100644
@@ -5,7 +5,7 @@ group_fd=-1
 flags=0|8
 cpu=*
 type=0
-size=112
+size=120
 config=0
 sample_period=0
 sample_type=65536
tools/perf/tests/sample-parsing.c +15 -1
index 3a02426..2762e11 100644
@@ -150,6 +150,15 @@ static bool samples_same(const struct perf_sample *s1,
 	if (type & PERF_SAMPLE_PHYS_ADDR)
 		COMP(phys_addr);
 
+	if (type & PERF_SAMPLE_AUX) {
+		COMP(aux_sample.size);
+		if (memcmp(s1->aux_sample.data, s2->aux_sample.data,
+			   s1->aux_sample.size)) {
+			pr_debug("Samples differ at 'aux_sample'\n");
+			return false;
+		}
+	}
+
 	return true;
 }
 
@@ -182,6 +191,7 @@ static int do_test(u64 sample_type, u64 sample_regs, u64 read_format)
 	u64 regs[64];
 	const u64 raw_data[] = {0x123456780a0b0c0dULL, 0x1102030405060708ULL};
 	const u64 data[] = {0x2211443366558877ULL, 0, 0xaabbccddeeff4321ULL};
+	const u64 aux_data[] = {0xa55a, 0, 0xeeddee, 0x0282028202820282};
 	struct perf_sample sample = {
 		.ip		= 101,
 		.pid		= 102,
@@ -218,6 +228,10 @@ static int do_test(u64 sample_type, u64 sample_regs, u64 read_format)
 			.regs	= regs,
 		},
 		.phys_addr	= 113,
+		.aux_sample	= {
+			.size	= sizeof(aux_data),
+			.data	= (void *)aux_data,
+		},
 	};
 	struct sample_read_value values[] = {{1, 5}, {9, 3}, {2, 7}, {6, 4},};
 	struct perf_sample sample_out;
@@ -317,7 +331,7 @@ int test__sample_parsing(struct test *test __maybe_unused, int subtest __maybe_u
 	 * were added.  Please actually update the test rather than just change
 	 * the condition below.
 	 */
-	if (PERF_SAMPLE_MAX > PERF_SAMPLE_PHYS_ADDR << 1) {
+	if (PERF_SAMPLE_MAX > PERF_SAMPLE_AUX << 1) {
 		pr_debug("sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating\n");
 		return -1;
 	}
tools/perf/util/event.h +6 -0
index a0a0c91..8522315 100644
@@ -114,6 +114,11 @@ enum {
 
 #define MAX_INSN 16
 
+struct aux_sample {
+	u64 size;
+	void *data;
+};
+
 struct perf_sample {
 	u64 ip;
 	u32 pid, tid;
@@ -142,6 +147,7 @@ struct perf_sample {
 	struct regs_dump  intr_regs;
 	struct stack_dump user_stack;
 	struct sample_read read;
+	struct aux_sample aux_sample;
 };
 
 #define PERF_MEM_DATA_SRC_NONE \
tools/perf/util/evsel.c +13 -0
index 1bf60f3..772f487 100644
@@ -2209,6 +2209,19 @@ int perf_evsel__parse_sample(struct evsel *evsel, union perf_event *event,
 		array++;
 	}
 
+	if (type & PERF_SAMPLE_AUX) {
+		OVERFLOW_CHECK_u64(array);
+		sz = *array++;
+
+		OVERFLOW_CHECK(array, sz, max_size);
+		/* Undo swap of data */
+		if (swapped)
+			mem_bswap_64((char *)array, sz);
+		data->aux_sample.size = sz;
+		data->aux_sample.data = (char *)array;
+		array = (void *)array + sz;
+	}
+
 	return 0;
 }
 
tools/perf/util/perf_event_attr_fprintf.c +2 -1
index d4ad3f0..6512031 100644
@@ -34,7 +34,7 @@ static void __p_sample_type(char *buf, size_t size, u64 value)
 		bit_name(PERIOD), bit_name(STREAM_ID), bit_name(RAW),
 		bit_name(BRANCH_STACK), bit_name(REGS_USER), bit_name(STACK_USER),
 		bit_name(IDENTIFIER), bit_name(REGS_INTR), bit_name(DATA_SRC),
-		bit_name(WEIGHT), bit_name(PHYS_ADDR),
+		bit_name(WEIGHT), bit_name(PHYS_ADDR), bit_name(AUX),
 		{ .name = NULL, }
 	};
 #undef bit_name
@@ -143,6 +143,7 @@ int perf_event_attr__fprintf(FILE *fp, struct perf_event_attr *attr,
 	PRINT_ATTRf(sample_regs_intr, p_hex);
 	PRINT_ATTRf(aux_watermark, p_unsigned);
 	PRINT_ATTRf(sample_max_stack, p_unsigned);
+	PRINT_ATTRf(aux_sample_size, p_unsigned);
 
 	return ret;
 }
tools/perf/util/session.c +1 -0
index 8454a65..dbdb476 100644
@@ -752,6 +752,7 @@ do { 						\
 	bswap_field_32(sample_stack_user);
 	bswap_field_32(aux_watermark);
 	bswap_field_16(sample_max_stack);
+	bswap_field_32(aux_sample_size);
 
 	/*
 	 * After read_format are bitfields. Check read_format because
tools/perf/util/synthetic-events.c +12 -0
index cfa3c9f..48c3f8b 100644
@@ -1228,6 +1228,11 @@ size_t perf_event__sample_event_size(const struct perf_sample *sample, u64 type,
 	if (type & PERF_SAMPLE_PHYS_ADDR)
 		result += sizeof(u64);
 
+	if (type & PERF_SAMPLE_AUX) {
+		result += sizeof(u64);
+		result += sample->aux_sample.size;
+	}
+
 	return result;
 }
 
@@ -1396,6 +1401,13 @@ int perf_event__synthesize_sample(union perf_event *event, u64 type, u64 read_fo
 		array++;
 	}
 
+	if (type & PERF_SAMPLE_AUX) {
+		sz = sample->aux_sample.size;
+		*array++ = sz;
+		memcpy(array, sample->aux_sample.data, sz);
+		array = (void *)array + sz;
+	}
+
 	return 0;
 }
 
author reviewer
#5 lore raw

PATCH 3/15 perf tools: Add a function to test for kernel support for AUX area sampling

In reply to Adrian Hunter

Architectures are expected to know if AUX area sampling is supported by the hardware. Add a function perf_can_aux_sample() which will determine whether the kernel supports it.

---
 tools/perf/util/evlist.h |  1 +
 tools/perf/util/record.c | 30 ++++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+)
tools/perf/util/evlist.h +1 -0
index 13051409fd22..3655b9ebb147 100644
@@ -176,6 +176,7 @@ void perf_evlist__set_id_pos(struct evlist *evlist);
 bool perf_can_sample_identifier(void);
 bool perf_can_record_switch_events(void);
 bool perf_can_record_cpu_wide(void);
+bool perf_can_aux_sample(void);
 void perf_evlist__config(struct evlist *evlist, struct record_opts *opts,
 			 struct callchain_param *callchain);
 int record_opts__config(struct record_opts *opts);
tools/perf/util/record.c +30 -0
index 8579505c29a4..e2321edcdd8f 100644
@@ -136,6 +136,36 @@ bool perf_can_record_cpu_wide(void)
 	return true;
 }
 
+/*
+ * Architectures are expected to know if AUX area sampling is supported by the
+ * hardware. Here we check for kernel support.
+ */
+bool perf_can_aux_sample(void)
+{
+	struct perf_event_attr attr = {
+		.exclude_kernel = 1,
+		/*
+		 * Non-zero value causes the kernel to calculate the effective
+		 * attribute size up to that byte.
+		 */
+		.aux_sample_size = 1,
+	};
+	int fd;
+
+	fd = sys_perf_event_open(&attr, -1, 0, -1, 0);
+	/*
+	 * If the kernel attribute is big enough to contain aux_sample_size
+	 * then we assume that it is supported. We are relying on the kernel to
+	 * validate the attribute size before anything else that could be wrong.
+	 */
+	if (fd == -E2BIG)
+		return false;
+	if (fd >= 0)
+		close(fd);
+
+	return true;
+}
+
 void perf_evlist__config(struct evlist *evlist, struct record_opts *opts,
 			 struct callchain_param *callchain)
 {
Signature · 1 line
2.17.1
merge bot Applied
#6 lore raw

[tip: perf/core] perf record: Add a function to test for kernel support for AUX area sampling

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     9bca1a4ef5034f0a82861ac0375eb0272c5ce04e
Gitweb:        https://git.kernel.org/tip/9bca1a4ef5034f0a82861ac0375eb0272c5ce04e
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:13 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:43:24 -03:00

perf record: Add a function to test for kernel support for AUX area sampling

Architectures are expected to know if AUX area sampling is supported by the hardware. Add a function perf_can_aux_sample() which will determine whether the kernel supports it.

Committer notes:

I reported that this message was taking place on a kernel without the required bits:

  # perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
  Error:
  The sys_perf_event_open() syscall returned with 7 (Argument list too long) for event (branch-misses:u).
  /bin/dmesg | grep -i perf may provide additional information.

Adrian sent a patch addressing it, with this explanation:

----
perf_can_aux_sample_size() always returned true because it did not pass the attribute size to sys_perf_event_open, nor correctly check the return value and errno.
----

After applying it I get, later in the series, when --aux-sample is added:

  # perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
  AUX area sampling is not supported by kernel
---
 tools/perf/util/evlist.h |  1 +
 tools/perf/util/record.c | 31 +++++++++++++++++++++++++++++++
 2 files changed, 32 insertions(+)
tools/perf/util/evlist.h +1 -0
index 1305140..3655b9e 100644
@@ -176,6 +176,7 @@ void perf_evlist__set_id_pos(struct evlist *evlist);
 bool perf_can_sample_identifier(void);
 bool perf_can_record_switch_events(void);
 bool perf_can_record_cpu_wide(void);
+bool perf_can_aux_sample(void);
 void perf_evlist__config(struct evlist *evlist, struct record_opts *opts,
 			 struct callchain_param *callchain);
 int record_opts__config(struct record_opts *opts);
tools/perf/util/record.c +31 -0
index 8579505..7def661 100644
@@ -136,6 +136,37 @@ bool perf_can_record_cpu_wide(void)
 	return true;
 }
 
+/*
+ * Architectures are expected to know if AUX area sampling is supported by the
+ * hardware. Here we check for kernel support.
+ */
+bool perf_can_aux_sample(void)
+{
+	struct perf_event_attr attr = {
+		.size = sizeof(struct perf_event_attr),
+		.exclude_kernel = 1,
+		/*
+		 * Non-zero value causes the kernel to calculate the effective
+		 * attribute size up to that byte.
+		 */
+		.aux_sample_size = 1,
+	};
+	int fd;
+
+	fd = sys_perf_event_open(&attr, -1, 0, -1, 0);
+	/*
+	 * If the kernel attribute is big enough to contain aux_sample_size
+	 * then we assume that it is supported. We are relying on the kernel to
+	 * validate the attribute size before anything else that could be wrong.
+	 */
+	if (fd < 0 && errno == E2BIG)
+		return false;
+	if (fd >= 0)
+		close(fd);
+
+	return true;
+}
+
 void perf_evlist__config(struct evlist *evlist, struct record_opts *opts,
 			 struct callchain_param *callchain)
 {
author reviewer
#7 lore raw

PATCH 4/15 perf auxtrace: Move perf_evsel__find_pmu()

In reply to Adrian Hunter

Move perf_evsel__find_pmu() so it can be used without forward declaration.

---
 tools/perf/util/auxtrace.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
tools/perf/util/auxtrace.c +12 -12
index c555c3ccd79d..263d1d9d8987 100644
@@ -57,6 +57,18 @@
 #include "symbol/kallsyms.h"
 #include <internal/lib.h>
 
+static struct perf_pmu *perf_evsel__find_pmu(struct evsel *evsel)
+{
+	struct perf_pmu *pmu = NULL;
+
+	while ((pmu = perf_pmu__scan(pmu)) != NULL) {
+		if (pmu->type == evsel->core.attr.type)
+			break;
+	}
+
+	return pmu;
+}
+
 static bool auxtrace__dont_decode(struct perf_session *session)
 {
 	return !session->itrace_synth_opts ||
@@ -2180,18 +2192,6 @@ static int parse_addr_filter(struct evsel *evsel, const char *filter,
 	return err;
 }
 
-static struct perf_pmu *perf_evsel__find_pmu(struct evsel *evsel)
-{
-	struct perf_pmu *pmu = NULL;
-
-	while ((pmu = perf_pmu__scan(pmu)) != NULL) {
-		if (pmu->type == evsel->core.attr.type)
-			break;
-	}
-
-	return pmu;
-}
-
 static int perf_evsel__nr_addr_filter(struct evsel *evsel)
 {
 	struct perf_pmu *pmu = perf_evsel__find_pmu(evsel);
Signature · 1 line
2.17.1
merge bot Applied
#8 lore raw

[tip: perf/core] perf auxtrace: Move perf_evsel__find_pmu()

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     f306de275b7c18da9ab060acb3dfa91c09e9ae89
Gitweb:        https://git.kernel.org/tip/f306de275b7c18da9ab060acb3dfa91c09e9ae89
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:14 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf auxtrace: Move perf_evsel__find_pmu()

Move perf_evsel__find_pmu() so it can be used without forward declaration.

---
 tools/perf/util/auxtrace.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
tools/perf/util/auxtrace.c +12 -12
index c555c3c..263d1d9 100644
@@ -57,6 +57,18 @@
 #include "symbol/kallsyms.h"
 #include <internal/lib.h>
 
+static struct perf_pmu *perf_evsel__find_pmu(struct evsel *evsel)
+{
+	struct perf_pmu *pmu = NULL;
+
+	while ((pmu = perf_pmu__scan(pmu)) != NULL) {
+		if (pmu->type == evsel->core.attr.type)
+			break;
+	}
+
+	return pmu;
+}
+
 static bool auxtrace__dont_decode(struct perf_session *session)
 {
 	return !session->itrace_synth_opts ||
@@ -2180,18 +2192,6 @@ out_exit:
 	return err;
 }
 
-static struct perf_pmu *perf_evsel__find_pmu(struct evsel *evsel)
-{
-	struct perf_pmu *pmu = NULL;
-
-	while ((pmu = perf_pmu__scan(pmu)) != NULL) {
-		if (pmu->type == evsel->core.attr.type)
-			break;
-	}
-
-	return pmu;
-}
-
 static int perf_evsel__nr_addr_filter(struct evsel *evsel)
 {
 	struct perf_pmu *pmu = perf_evsel__find_pmu(evsel);
author reviewer
#9 lore raw

PATCH 5/15 perf auxtrace: Add support for AUX area sample recording

In reply to Adrian Hunter

Add support for parsing and validating AUX area sample options. At present, the only option is the sample size, but it is also necessary to ensure that events are in a group with an AUX area event as the leader.

---
 tools/perf/util/auxtrace.c | 107 +++++++++++++++++++++++++++++++++++++
 tools/perf/util/auxtrace.h |  16 ++++++
 tools/perf/util/pmu.h      |   1 +
 tools/perf/util/record.h   |   2 +
 4 files changed, 126 insertions(+)
tools/perf/util/auxtrace.c +107 -0
index 263d1d9d8987..51fbe01f8a11 100644
@@ -69,6 +69,13 @@ static struct perf_pmu *perf_evsel__find_pmu(struct evsel *evsel)
 	return pmu;
 }
 
+static bool perf_evsel__is_aux_event(struct evsel *evsel)
+{
+	struct perf_pmu *pmu = perf_evsel__find_pmu(evsel);
+
+	return pmu && pmu->auxtrace;
+}
+
 static bool auxtrace__dont_decode(struct perf_session *session)
 {
 	return !session->itrace_synth_opts ||
@@ -609,6 +616,106 @@ int auxtrace_parse_snapshot_options(struct auxtrace_record *itr,
 	return -EINVAL;
 }
 
+/*
+ * Event record size is 16-bit which results in a maximum size of about 64KiB.
+ * Allow about 4KiB for the rest of the sample record, to give a maximum
+ * AUX area sample size of 60KiB.
+ */
+#define MAX_AUX_SAMPLE_SIZE (60 * 1024)
+
+/* Arbitrary default size if no other default provided */
+#define DEFAULT_AUX_SAMPLE_SIZE (4 * 1024)
+
+static int auxtrace_validate_aux_sample_size(struct evlist *evlist,
+					     struct record_opts *opts)
+{
+	struct evsel *evsel;
+	bool has_aux_leader = false;
+	u32 sz;
+
+	evlist__for_each_entry(evlist, evsel) {
+		sz = evsel->core.attr.aux_sample_size;
+		if (perf_evsel__is_group_leader(evsel)) {
+			has_aux_leader = perf_evsel__is_aux_event(evsel);
+			if (sz) {
+				if (has_aux_leader)
+					pr_err("Cannot add AUX area sampling to an AUX area event\n");
+				else
+					pr_err("Cannot add AUX area sampling to a group leader\n");
+				return -EINVAL;
+			}
+		}
+		if (sz > MAX_AUX_SAMPLE_SIZE) {
+			pr_err("AUX area sample size %u too big, max. %d\n",
+			       sz, MAX_AUX_SAMPLE_SIZE);
+			return -EINVAL;
+		}
+		if (sz) {
+			if (!has_aux_leader) {
+				pr_err("Cannot add AUX area sampling because group leader is not an AUX area event\n");
+				return -EINVAL;
+			}
+			perf_evsel__set_sample_bit(evsel, AUX);
+			opts->auxtrace_sample_mode = true;
+		} else {
+			perf_evsel__reset_sample_bit(evsel, AUX);
+		}
+	}
+
+	if (!opts->auxtrace_sample_mode) {
+		pr_err("AUX area sampling requires an AUX area event group leader plus other events to which to add samples\n");
+		return -EINVAL;
+	}
+
+	if (!perf_can_aux_sample()) {
+		pr_err("AUX area sampling is not supported by kernel\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int auxtrace_parse_sample_options(struct auxtrace_record *itr,
+				  struct evlist *evlist,
+				  struct record_opts *opts, const char *str)
+{
+	bool has_aux_leader = false;
+	struct evsel *evsel;
+	char *endptr;
+	unsigned long sz;
+
+	if (!str)
+		return 0;
+
+	if (!itr) {
+		pr_err("No AUX area event to sample\n");
+		return -EINVAL;
+	}
+
+	sz = strtoul(str, &endptr, 0);
+	if (*endptr || sz > UINT_MAX) {
+		pr_err("Bad AUX area sampling option: '%s'\n", str);
+		return -EINVAL;
+	}
+
+	if (!sz)
+		sz = itr->default_aux_sample_size;
+
+	if (!sz)
+		sz = DEFAULT_AUX_SAMPLE_SIZE;
+
+	/* Set aux_sample_size based on --aux-sample option */
+	evlist__for_each_entry(evlist, evsel) {
+		if (perf_evsel__is_group_leader(evsel)) {
+			has_aux_leader = perf_evsel__is_aux_event(evsel);
+		} else if (has_aux_leader) {
+			evsel->core.attr.aux_sample_size = sz;
+		}
+	}
+
+	return auxtrace_validate_aux_sample_size(evlist, opts);
+}
+
 struct auxtrace_record *__weak
 auxtrace_record__init(struct evlist *evlist __maybe_unused, int *err)
 {
tools/perf/util/auxtrace.h +16 -0
index 3f4aa5427d76..12b02eb4e01c 100644
@@ -313,6 +313,7 @@ struct auxtrace_mmap_params {
  * @reference: provide a 64-bit reference number for auxtrace_event
  * @read_finish: called after reading from an auxtrace mmap
  * @alignment: alignment (if any) for AUX area data
+ * @default_aux_sample_size: default sample size for --aux sample option
  */
 struct auxtrace_record {
 	int (*recording_options)(struct auxtrace_record *itr,
@@ -336,6 +337,7 @@ struct auxtrace_record {
 	u64 (*reference)(struct auxtrace_record *itr);
 	int (*read_finish)(struct auxtrace_record *itr, int idx);
 	unsigned int alignment;
+	unsigned int default_aux_sample_size;
 };
 
 /**
@@ -498,6 +500,9 @@ struct auxtrace_record *auxtrace_record__init(struct evlist *evlist,
 int auxtrace_parse_snapshot_options(struct auxtrace_record *itr,
 				    struct record_opts *opts,
 				    const char *str);
+int auxtrace_parse_sample_options(struct auxtrace_record *itr,
+				  struct evlist *evlist,
+				  struct record_opts *opts, const char *str);
 int auxtrace_record__options(struct auxtrace_record *itr,
 			     struct evlist *evlist,
 			     struct record_opts *opts);
@@ -648,6 +653,17 @@ int auxtrace_parse_snapshot_options(struct auxtrace_record *itr __maybe_unused,
 	return -EINVAL;
 }
 
+int auxtrace_parse_sample_options(struct auxtrace_record *itr __maybe_unused,
+				  struct evlist *evlist __maybe_unused,
+				  struct record_opts *opts __maybe_unused,
+				  const char *str)
+{
+	if (!str)
+		return 0;
+	pr_err("AUX area tracing not supported\n");
+	return -EINVAL;
+}
+
 static inline
 int auxtrace__process_event(struct perf_session *session __maybe_unused,
 			    union perf_event *event __maybe_unused,
tools/perf/util/pmu.h +1 -0
index 3e8cd31a89cc..2eb7a7001307 100644
@@ -26,6 +26,7 @@ struct perf_pmu {
 	__u32 type;
 	bool selectable;
 	bool is_uncore;
+	bool auxtrace;
 	int max_precise;
 	struct perf_event_attr *default_config;
 	struct perf_cpu_map *cpus;
tools/perf/util/record.h +2 -0
index 948bbcf9aef3..5421fd2ad383 100644
@@ -32,6 +32,7 @@ struct record_opts {
 	bool	      full_auxtrace;
 	bool	      auxtrace_snapshot_mode;
 	bool	      auxtrace_snapshot_on_exit;
+	bool	      auxtrace_sample_mode;
 	bool	      record_namespaces;
 	bool	      record_switch_events;
 	bool	      all_kernel;
@@ -56,6 +57,7 @@ struct record_opts {
 	u64	      user_interval;
 	size_t	      auxtrace_snapshot_size;
 	const char    *auxtrace_snapshot_opts;
+	const char    *auxtrace_sample_opts;
 	bool	      sample_transaction;
 	unsigned      initial_delay;
 	bool	      use_clockid;
Signature · 1 line
2.17.1
merge bot Applied
#10 lore raw

[tip: perf/core] perf auxtrace: Add support for AUX area sample recording

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     f0bb7ee8530a07d3c23bd2e06984796e66cfbcf1
Gitweb:        https://git.kernel.org/tip/f0bb7ee8530a07d3c23bd2e06984796e66cfbcf1
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:15 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf auxtrace: Add support for AUX area sample recording

Add support for parsing and validating AUX area sample options. At present, the only option is the sample size, but it is also necessary to ensure that events are in a group with an AUX area event as the leader.

Committer note:

Add missing 'static inline' in front of auxtrace_parse_sample_options() for when we don't HAVE_AUXTRACE_SUPPORT.

---
 tools/perf/util/auxtrace.c | 107 ++++++++++++++++++++++++++++++++++++-
 tools/perf/util/auxtrace.h |  17 ++++++-
 tools/perf/util/pmu.h      |   1 +-
 tools/perf/util/record.h   |   2 +-
 4 files changed, 127 insertions(+)
tools/perf/util/auxtrace.c +107 -0
index 263d1d9..51fbe01 100644
@@ -69,6 +69,13 @@ static struct perf_pmu *perf_evsel__find_pmu(struct evsel *evsel)
 	return pmu;
 }
 
+static bool perf_evsel__is_aux_event(struct evsel *evsel)
+{
+	struct perf_pmu *pmu = perf_evsel__find_pmu(evsel);
+
+	return pmu && pmu->auxtrace;
+}
+
 static bool auxtrace__dont_decode(struct perf_session *session)
 {
 	return !session->itrace_synth_opts ||
@@ -609,6 +616,106 @@ int auxtrace_parse_snapshot_options(struct auxtrace_record *itr,
 	return -EINVAL;
 }
 
+/*
+ * Event record size is 16-bit which results in a maximum size of about 64KiB.
+ * Allow about 4KiB for the rest of the sample record, to give a maximum
+ * AUX area sample size of 60KiB.
+ */
+#define MAX_AUX_SAMPLE_SIZE (60 * 1024)
+
+/* Arbitrary default size if no other default provided */
+#define DEFAULT_AUX_SAMPLE_SIZE (4 * 1024)
+
+static int auxtrace_validate_aux_sample_size(struct evlist *evlist,
+					     struct record_opts *opts)
+{
+	struct evsel *evsel;
+	bool has_aux_leader = false;
+	u32 sz;
+
+	evlist__for_each_entry(evlist, evsel) {
+		sz = evsel->core.attr.aux_sample_size;
+		if (perf_evsel__is_group_leader(evsel)) {
+			has_aux_leader = perf_evsel__is_aux_event(evsel);
+			if (sz) {
+				if (has_aux_leader)
+					pr_err("Cannot add AUX area sampling to an AUX area event\n");
+				else
+					pr_err("Cannot add AUX area sampling to a group leader\n");
+				return -EINVAL;
+			}
+		}
+		if (sz > MAX_AUX_SAMPLE_SIZE) {
+			pr_err("AUX area sample size %u too big, max. %d\n",
+			       sz, MAX_AUX_SAMPLE_SIZE);
+			return -EINVAL;
+		}
+		if (sz) {
+			if (!has_aux_leader) {
+				pr_err("Cannot add AUX area sampling because group leader is not an AUX area event\n");
+				return -EINVAL;
+			}
+			perf_evsel__set_sample_bit(evsel, AUX);
+			opts->auxtrace_sample_mode = true;
+		} else {
+			perf_evsel__reset_sample_bit(evsel, AUX);
+		}
+	}
+
+	if (!opts->auxtrace_sample_mode) {
+		pr_err("AUX area sampling requires an AUX area event group leader plus other events to which to add samples\n");
+		return -EINVAL;
+	}
+
+	if (!perf_can_aux_sample()) {
+		pr_err("AUX area sampling is not supported by kernel\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int auxtrace_parse_sample_options(struct auxtrace_record *itr,
+				  struct evlist *evlist,
+				  struct record_opts *opts, const char *str)
+{
+	bool has_aux_leader = false;
+	struct evsel *evsel;
+	char *endptr;
+	unsigned long sz;
+
+	if (!str)
+		return 0;
+
+	if (!itr) {
+		pr_err("No AUX area event to sample\n");
+		return -EINVAL;
+	}
+
+	sz = strtoul(str, &endptr, 0);
+	if (*endptr || sz > UINT_MAX) {
+		pr_err("Bad AUX area sampling option: '%s'\n", str);
+		return -EINVAL;
+	}
+
+	if (!sz)
+		sz = itr->default_aux_sample_size;
+
+	if (!sz)
+		sz = DEFAULT_AUX_SAMPLE_SIZE;
+
+	/* Set aux_sample_size based on --aux-sample option */
+	evlist__for_each_entry(evlist, evsel) {
+		if (perf_evsel__is_group_leader(evsel)) {
+			has_aux_leader = perf_evsel__is_aux_event(evsel);
+		} else if (has_aux_leader) {
+			evsel->core.attr.aux_sample_size = sz;
+		}
+	}
+
+	return auxtrace_validate_aux_sample_size(evlist, opts);
+}
+
 struct auxtrace_record *__weak
 auxtrace_record__init(struct evlist *evlist __maybe_unused, int *err)
 {
tools/perf/util/auxtrace.h +17 -0
index 3f4aa54..ab48de1 100644
@@ -313,6 +313,7 @@ struct auxtrace_mmap_params {
  * @reference: provide a 64-bit reference number for auxtrace_event
  * @read_finish: called after reading from an auxtrace mmap
  * @alignment: alignment (if any) for AUX area data
+ * @default_aux_sample_size: default sample size for --aux sample option
  */
 struct auxtrace_record {
 	int (*recording_options)(struct auxtrace_record *itr,
@@ -336,6 +337,7 @@ struct auxtrace_record {
 	u64 (*reference)(struct auxtrace_record *itr);
 	int (*read_finish)(struct auxtrace_record *itr, int idx);
 	unsigned int alignment;
+	unsigned int default_aux_sample_size;
 };
 
 /**
@@ -498,6 +500,9 @@ struct auxtrace_record *auxtrace_record__init(struct evlist *evlist,
 int auxtrace_parse_snapshot_options(struct auxtrace_record *itr,
 				    struct record_opts *opts,
 				    const char *str);
+int auxtrace_parse_sample_options(struct auxtrace_record *itr,
+				  struct evlist *evlist,
+				  struct record_opts *opts, const char *str);
 int auxtrace_record__options(struct auxtrace_record *itr,
 			     struct evlist *evlist,
 			     struct record_opts *opts);
@@ -649,6 +654,18 @@ int auxtrace_parse_snapshot_options(struct auxtrace_record *itr __maybe_unused,
 }
 
 static inline
+int auxtrace_parse_sample_options(struct auxtrace_record *itr __maybe_unused,
+				  struct evlist *evlist __maybe_unused,
+				  struct record_opts *opts __maybe_unused,
+				  const char *str)
+{
+	if (!str)
+		return 0;
+	pr_err("AUX area tracing not supported\n");
+	return -EINVAL;
+}
+
+static inline
 int auxtrace__process_event(struct perf_session *session __maybe_unused,
 			    union perf_event *event __maybe_unused,
 			    struct perf_sample *sample __maybe_unused,
tools/perf/util/pmu.h +1 -0
index 3e8cd31..2eb7a70 100644
@@ -26,6 +26,7 @@ struct perf_pmu {
 	__u32 type;
 	bool selectable;
 	bool is_uncore;
+	bool auxtrace;
 	int max_precise;
 	struct perf_event_attr *default_config;
 	struct perf_cpu_map *cpus;
tools/perf/util/record.h +2 -0
index 948bbcf..5421fd2 100644
@@ -32,6 +32,7 @@ struct record_opts {
 	bool	      full_auxtrace;
 	bool	      auxtrace_snapshot_mode;
 	bool	      auxtrace_snapshot_on_exit;
+	bool	      auxtrace_sample_mode;
 	bool	      record_namespaces;
 	bool	      record_switch_events;
 	bool	      all_kernel;
@@ -56,6 +57,7 @@ struct record_opts {
 	u64	      user_interval;
 	size_t	      auxtrace_snapshot_size;
 	const char    *auxtrace_snapshot_opts;
+	const char    *auxtrace_sample_opts;
 	bool	      sample_transaction;
 	unsigned      initial_delay;
 	bool	      use_clockid;
author reviewer
#11 lore raw

PATCH 6/15 perf record: Add support for AUX area sampling

In reply to Adrian Hunter

Add a 'perf record' option '--aux-sample' to request AUX area sampling. AUX area sampling uses an overwriting buffer much like snapshot mode, so adjust the AUX buffer mmapping accordingly. To make it easy to queue samples for decoding, synthesize an ID index.

---
 tools/perf/Documentation/perf-record.txt |  6 ++++++
 tools/perf/builtin-record.c              | 21 ++++++++++++++++++++-
 2 files changed, 26 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-record.txt +6 -0
index ebcba1f95513..e216d7b529c9 100644
@@ -433,6 +433,12 @@ can be specified in a string that follows this option:
 In Snapshot Mode trace data is captured only when signal SIGUSR2 is received
 and on exit if the above 'e' option is given.
 
+--aux-sample[=OPTIONS]::
+Select AUX area sampling. At least one of the events selected by the -e option
+must be an AUX area event. Samples on other events will be created containing
+data from the AUX area. Optionally sample size may be specified, otherwise it
+defaults to 4KiB.
+
 --proc-map-timeout::
 When processing pre-existing threads /proc/XXX/mmap, it may take a long time,
 because the file may be huge. A time out is needed in such cases.
tools/perf/builtin-record.c +20 -1
index b95c000c1ed9..d6383a557274 100644
@@ -680,6 +680,11 @@ static int record__auxtrace_init(struct record *rec)
 	if (err)
 		return err;
 
+	err = auxtrace_parse_sample_options(rec->itr, rec->evlist, &rec->opts,
+					    rec->opts.auxtrace_sample_opts);
+	if (err)
+		return err;
+
 	return auxtrace_parse_filters(rec->evlist);
 }
 
@@ -752,6 +757,8 @@ static int record__mmap_evlist(struct record *rec,
 			       struct evlist *evlist)
 {
 	struct record_opts *opts = &rec->opts;
+	bool auxtrace_overwrite = opts->auxtrace_snapshot_mode ||
+				  opts->auxtrace_sample_mode;
 	char msg[512];
 
 	if (opts->affinity != PERF_AFFINITY_SYS)
@@ -759,7 +766,7 @@ static int record__mmap_evlist(struct record *rec,
 
 	if (evlist__mmap_ex(evlist, opts->mmap_pages,
 				 opts->auxtrace_mmap_pages,
-				 opts->auxtrace_snapshot_mode,
+				 auxtrace_overwrite,
 				 opts->nr_cblocks, opts->affinity,
 				 opts->mmap_flush, opts->comp_level) < 0) {
 		if (errno == EPERM) {
@@ -1046,6 +1053,7 @@ static int record__mmap_read_evlist(struct record *rec, struct evlist *evlist,
 		}
 
 		if (map->auxtrace_mmap.base && !rec->opts.auxtrace_snapshot_mode &&
+		    !rec->opts.auxtrace_sample_mode &&
 		    record__auxtrace_mmap_read(rec, map) != 0) {
 			rc = -1;
 			goto out;
@@ -1321,6 +1329,15 @@ static int record__synthesize(struct record *rec, bool tail)
 	if (err)
 		goto out;
 
+	/* Synthesize id_index before auxtrace_info */
+	if (rec->opts.auxtrace_sample_mode) {
+		err = perf_event__synthesize_id_index(tool,
+						      process_synthesized_event,
+						      session->evlist, machine);
+		if (err)
+			goto out;
+	}
+
 	if (rec->opts.full_auxtrace) {
 		err = perf_event__synthesize_auxtrace_info(rec->itr, tool,
 					session, process_synthesized_event);
@@ -2304,6 +2321,8 @@ static struct option __record_options[] = {
 	parse_clockid),
 	OPT_STRING_OPTARG('S', "snapshot", &record.opts.auxtrace_snapshot_opts,
 			  "opts", "AUX area tracing Snapshot Mode", ""),
+	OPT_STRING_OPTARG(0, "aux-sample", &record.opts.auxtrace_sample_opts,
+			  "opts", "sample AUX area", ""),
 	OPT_UINTEGER(0, "proc-map-timeout", &proc_map_timeout,
 			"per thread proc mmap processing timeout in ms"),
 	OPT_BOOLEAN(0, "namespaces", &record.opts.record_namespaces,
Signature · 1 line
2.17.1
merge bot Applied
#12 lore raw

[tip: perf/core] perf record: Add support for AUX area sampling

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     c0a6de06c446f8d173ef53fba361acedd5880b20
Gitweb:        https://git.kernel.org/tip/c0a6de06c446f8d173ef53fba361acedd5880b20
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:16 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf record: Add support for AUX area sampling

Add a 'perf record' option '--aux-sample' to request AUX area sampling. AUX area sampling uses an overwriting buffer much like snapshot mode, so adjust the AUX buffer mmapping accordingly. To make it easy to queue samples for decoding, synthesize an ID index.

---
 tools/perf/Documentation/perf-record.txt |  6 ++++++
 tools/perf/builtin-record.c              | 21 ++++++++++++++++++++-
 2 files changed, 26 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-record.txt +6 -0
index ebcba1f..e216d7b 100644
@@ -433,6 +433,12 @@ can be specified in a string that follows this option:
 In Snapshot Mode trace data is captured only when signal SIGUSR2 is received
 and on exit if the above 'e' option is given.
 
+--aux-sample[=OPTIONS]::
+Select AUX area sampling. At least one of the events selected by the -e option
+must be an AUX area event. Samples on other events will be created containing
+data from the AUX area. Optionally sample size may be specified, otherwise it
+defaults to 4KiB.
+
 --proc-map-timeout::
 When processing pre-existing threads /proc/XXX/mmap, it may take a long time,
 because the file may be huge. A time out is needed in such cases.
tools/perf/builtin-record.c +20 -1
index 7ab3110..b5063d3 100644
@@ -680,6 +680,11 @@ static int record__auxtrace_init(struct record *rec)
 	if (err)
 		return err;
 
+	err = auxtrace_parse_sample_options(rec->itr, rec->evlist, &rec->opts,
+					    rec->opts.auxtrace_sample_opts);
+	if (err)
+		return err;
+
 	return auxtrace_parse_filters(rec->evlist);
 }
 
@@ -752,6 +757,8 @@ static int record__mmap_evlist(struct record *rec,
 			       struct evlist *evlist)
 {
 	struct record_opts *opts = &rec->opts;
+	bool auxtrace_overwrite = opts->auxtrace_snapshot_mode ||
+				  opts->auxtrace_sample_mode;
 	char msg[512];
 
 	if (opts->affinity != PERF_AFFINITY_SYS)
@@ -759,7 +766,7 @@ static int record__mmap_evlist(struct record *rec,
 
 	if (evlist__mmap_ex(evlist, opts->mmap_pages,
 				 opts->auxtrace_mmap_pages,
-				 opts->auxtrace_snapshot_mode,
+				 auxtrace_overwrite,
 				 opts->nr_cblocks, opts->affinity,
 				 opts->mmap_flush, opts->comp_level) < 0) {
 		if (errno == EPERM) {
@@ -1046,6 +1053,7 @@ static int record__mmap_read_evlist(struct record *rec, struct evlist *evlist,
 		}
 
 		if (map->auxtrace_mmap.base && !rec->opts.auxtrace_snapshot_mode &&
+		    !rec->opts.auxtrace_sample_mode &&
 		    record__auxtrace_mmap_read(rec, map) != 0) {
 			rc = -1;
 			goto out;
@@ -1321,6 +1329,15 @@ static int record__synthesize(struct record *rec, bool tail)
 	if (err)
 		goto out;
 
+	/* Synthesize id_index before auxtrace_info */
+	if (rec->opts.auxtrace_sample_mode) {
+		err = perf_event__synthesize_id_index(tool,
+						      process_synthesized_event,
+						      session->evlist, machine);
+		if (err)
+			goto out;
+	}
+
 	if (rec->opts.full_auxtrace) {
 		err = perf_event__synthesize_auxtrace_info(rec->itr, tool,
 					session, process_synthesized_event);
@@ -2329,6 +2346,8 @@ static struct option __record_options[] = {
 	parse_clockid),
 	OPT_STRING_OPTARG('S', "snapshot", &record.opts.auxtrace_snapshot_opts,
 			  "opts", "AUX area tracing Snapshot Mode", ""),
+	OPT_STRING_OPTARG(0, "aux-sample", &record.opts.auxtrace_sample_opts,
+			  "opts", "sample AUX area", ""),
 	OPT_UINTEGER(0, "proc-map-timeout", &proc_map_timeout,
 			"per thread proc mmap processing timeout in ms"),
 	OPT_BOOLEAN(0, "namespaces", &record.opts.record_namespaces,
author reviewer
#13 lore raw

PATCH 7/15 perf record: Add aux-sample-size config term

In reply to Adrian Hunter

To allow individual events to be selected for AUX area sampling, add aux-sample-size config term. attr.aux_sample_size is updated by auxtrace_parse_sample_options() so that the existing validation will see the value. Any event that has a non-zero aux_sample_size will cause AUX area sampling to be configured, irrespective of the --aux-sample option.

---
 tools/perf/Documentation/perf-record.txt |  3 +
 tools/perf/util/auxtrace.c               | 76 +++++++++++++++++++++++-
 tools/perf/util/evsel.c                  | 16 +++++
 tools/perf/util/evsel_config.h           | 11 ++++
 tools/perf/util/parse-events.c           | 14 +++++
 tools/perf/util/parse-events.h           |  1 +
 tools/perf/util/parse-events.l           |  1 +
 7 files changed, 121 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-record.txt +3 -0
index e216d7b529c9..b23a4012a606 100644
@@ -62,6 +62,9 @@ OPTIONS
 		    like this: name=\'CPU_CLK_UNHALTED.THREAD:cmask=0x1\'.
 	  - 'aux-output': Generate AUX records instead of events. This requires
 			  that an AUX area event is also provided.
+	  - 'aux-sample-size': Set sample size for AUX area sampling. If the
+	  '--aux-sample' option has been used, set aux-sample-size=0 to disable
+	  AUX area sampling for the event.
 
           See the linkperf:perf-list[1] man page for more parameters.
 
tools/perf/util/auxtrace.c +75 -1

106 lines not on this page · raw message

tools/perf/util/evsel.c +16 -0
index 772f4879c492..ad7665a546cf 100644
@@ -846,6 +846,9 @@ static void apply_config_terms(struct evsel *evsel,
 		case PERF_EVSEL__CONFIG_TERM_AUX_OUTPUT:
 			attr->aux_output = term->val.aux_output ? 1 : 0;
 			break;
+		case PERF_EVSEL__CONFIG_TERM_AUX_SAMPLE_SIZE:
+			/* Already applied by auxtrace */
+			break;
 		default:
 			break;
 		}
@@ -905,6 +908,19 @@ static bool is_dummy_event(struct evsel *evsel)
 	       (evsel->core.attr.config == PERF_COUNT_SW_DUMMY);
 }
 
+struct perf_evsel_config_term *__perf_evsel__get_config_term(struct evsel *evsel,
+							     enum evsel_term_type type)
+{
+	struct perf_evsel_config_term *term, *found_term = NULL;
+
+	list_for_each_entry(term, &evsel->config_terms, list) {
+		if (term->type == type)
+			found_term = term;
+	}
+
+	return found_term;
+}
+
 /*
  * The enable_on_exec/disabled value strategy:
  *
tools/perf/util/evsel_config.h +11 -0
index 8a7648037c18..6e654ede8fbe 100644
@@ -25,6 +25,7 @@ enum evsel_term_type {
 	PERF_EVSEL__CONFIG_TERM_BRANCH,
 	PERF_EVSEL__CONFIG_TERM_PERCORE,
 	PERF_EVSEL__CONFIG_TERM_AUX_OUTPUT,
+	PERF_EVSEL__CONFIG_TERM_AUX_SAMPLE_SIZE,
 };
 
 struct perf_evsel_config_term {
@@ -44,7 +45,17 @@ struct perf_evsel_config_term {
 		unsigned long max_events;
 		bool	      percore;
 		bool	      aux_output;
+		u32	      aux_sample_size;
 	} val;
 	bool weak;
 };
+
+struct evsel;
+
+struct perf_evsel_config_term *__perf_evsel__get_config_term(struct evsel *evsel,
+							     enum evsel_term_type type);
+
+#define perf_evsel__get_config_term(evsel, type) \
+	__perf_evsel__get_config_term(evsel, PERF_EVSEL__CONFIG_TERM_ ## type)
+
 #endif // __PERF_EVSEL_CONFIG_H
tools/perf/util/parse-events.c +14 -0
index 6d18ff9bce49..73e0bf293c12 100644
@@ -979,6 +979,7 @@ static const char *config_term_names[__PARSE_EVENTS__TERM_TYPE_NR] = {
 	[PARSE_EVENTS__TERM_TYPE_DRV_CFG]		= "driver-config",
 	[PARSE_EVENTS__TERM_TYPE_PERCORE]		= "percore",
 	[PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT]		= "aux-output",
+	[PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE]	= "aux-sample-size",
 };
 
 static bool config_term_shrinked;
@@ -1109,6 +1110,15 @@ do {									   \
 	case PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT:
 		CHECK_TYPE_VAL(NUM);
 		break;
+	case PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE:
+		CHECK_TYPE_VAL(NUM);
+		if (term->val.num > UINT_MAX) {
+			parse_events__handle_error(err, term->err_val,
+						strdup("too big"),
+						NULL);
+			return -EINVAL;
+		}
+		break;
 	default:
 		parse_events__handle_error(err, term->err_term,
 				strdup("unknown term"),
@@ -1160,6 +1170,7 @@ static int config_term_tracepoint(struct perf_event_attr *attr,
 	case PARSE_EVENTS__TERM_TYPE_OVERWRITE:
 	case PARSE_EVENTS__TERM_TYPE_NOOVERWRITE:
 	case PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT:
+	case PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE:
 		return config_term_common(attr, term, err);
 	default:
 		if (err) {
@@ -1255,6 +1266,9 @@ do {								\
 		case PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT:
 			ADD_CONFIG_TERM(AUX_OUTPUT, aux_output, term->val.num ? 1 : 0);
 			break;
+		case PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE:
+			ADD_CONFIG_TERM(AUX_SAMPLE_SIZE, aux_sample_size, term->val.num);
+			break;
 		default:
 			break;
 		}
tools/perf/util/parse-events.h +1 -0
index 5ee8ac93840c..16d57294f332 100644
@@ -77,6 +77,7 @@ enum {
 	PARSE_EVENTS__TERM_TYPE_DRV_CFG,
 	PARSE_EVENTS__TERM_TYPE_PERCORE,
 	PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT,
+	PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE,
 	__PARSE_EVENTS__TERM_TYPE_NR,
 };
 
tools/perf/util/parse-events.l +1 -0
index 7469497cd28e..7b1c8ee537cf 100644
@@ -285,6 +285,7 @@ overwrite		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_OVERWRITE); }
 no-overwrite		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NOOVERWRITE); }
 percore			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_PERCORE); }
 aux-output		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT); }
+aux-sample-size		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE); }
 ,			{ return ','; }
 "/"			{ BEGIN(INITIAL); return '/'; }
 {name_minus}		{ return str(yyscanner, PE_NAME); }
Signature · 1 line
2.17.1
merge bot Applied
#14 lore raw

[tip: perf/core] perf record: Add aux-sample-size config term

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     eb7a52d46c6ac95df563f867d526b3d46616b10b
Gitweb:        https://git.kernel.org/tip/eb7a52d46c6ac95df563f867d526b3d46616b10b
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:17 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf record: Add aux-sample-size config term

To allow individual events to be selected for AUX area sampling, add aux-sample-size config term. attr.aux_sample_size is updated by auxtrace_parse_sample_options() so that the existing validation will see the value. Any event that has a non-zero aux_sample_size will cause AUX area sampling to be configured, irrespective of the --aux-sample option.

---
 tools/perf/Documentation/perf-record.txt |  3 +-
 tools/perf/util/auxtrace.c               | 76 ++++++++++++++++++++++-
 tools/perf/util/evsel.c                  | 16 +++++-
 tools/perf/util/evsel_config.h           | 11 +++-
 tools/perf/util/parse-events.c           | 14 ++++-
 tools/perf/util/parse-events.h           |  1 +-
 tools/perf/util/parse-events.l           |  1 +-
 7 files changed, 121 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-record.txt +3 -0
index e216d7b..b23a401 100644
@@ -62,6 +62,9 @@ OPTIONS
 		    like this: name=\'CPU_CLK_UNHALTED.THREAD:cmask=0x1\'.
 	  - 'aux-output': Generate AUX records instead of events. This requires
 			  that an AUX area event is also provided.
+	  - 'aux-sample-size': Set sample size for AUX area sampling. If the
+	  '--aux-sample' option has been used, set aux-sample-size=0 to disable
+	  AUX area sampling for the event.
 
           See the linkperf:perf-list[1] man page for more parameters.
 
tools/perf/util/auxtrace.c +75 -1

106 lines not on this page · raw message

tools/perf/util/evsel.c +16 -0
index 772f487..ad7665a 100644
@@ -846,6 +846,9 @@ static void apply_config_terms(struct evsel *evsel,
 		case PERF_EVSEL__CONFIG_TERM_AUX_OUTPUT:
 			attr->aux_output = term->val.aux_output ? 1 : 0;
 			break;
+		case PERF_EVSEL__CONFIG_TERM_AUX_SAMPLE_SIZE:
+			/* Already applied by auxtrace */
+			break;
 		default:
 			break;
 		}
@@ -905,6 +908,19 @@ static bool is_dummy_event(struct evsel *evsel)
 	       (evsel->core.attr.config == PERF_COUNT_SW_DUMMY);
 }
 
+struct perf_evsel_config_term *__perf_evsel__get_config_term(struct evsel *evsel,
+							     enum evsel_term_type type)
+{
+	struct perf_evsel_config_term *term, *found_term = NULL;
+
+	list_for_each_entry(term, &evsel->config_terms, list) {
+		if (term->type == type)
+			found_term = term;
+	}
+
+	return found_term;
+}
+
 /*
  * The enable_on_exec/disabled value strategy:
  *
tools/perf/util/evsel_config.h +11 -0
index 8a76480..6e654ed 100644
@@ -25,6 +25,7 @@ enum evsel_term_type {
 	PERF_EVSEL__CONFIG_TERM_BRANCH,
 	PERF_EVSEL__CONFIG_TERM_PERCORE,
 	PERF_EVSEL__CONFIG_TERM_AUX_OUTPUT,
+	PERF_EVSEL__CONFIG_TERM_AUX_SAMPLE_SIZE,
 };
 
 struct perf_evsel_config_term {
@@ -44,7 +45,17 @@ struct perf_evsel_config_term {
 		unsigned long max_events;
 		bool	      percore;
 		bool	      aux_output;
+		u32	      aux_sample_size;
 	} val;
 	bool weak;
 };
+
+struct evsel;
+
+struct perf_evsel_config_term *__perf_evsel__get_config_term(struct evsel *evsel,
+							     enum evsel_term_type type);
+
+#define perf_evsel__get_config_term(evsel, type) \
+	__perf_evsel__get_config_term(evsel, PERF_EVSEL__CONFIG_TERM_ ## type)
+
 #endif // __PERF_EVSEL_CONFIG_H
tools/perf/util/parse-events.c +14 -0
index 6bae9d6..fc5e27b 100644
@@ -996,6 +996,7 @@ static const char *config_term_names[__PARSE_EVENTS__TERM_TYPE_NR] = {
 	[PARSE_EVENTS__TERM_TYPE_DRV_CFG]		= "driver-config",
 	[PARSE_EVENTS__TERM_TYPE_PERCORE]		= "percore",
 	[PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT]		= "aux-output",
+	[PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE]	= "aux-sample-size",
 };
 
 static bool config_term_shrinked;
@@ -1126,6 +1127,15 @@ do {									   \
 	case PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT:
 		CHECK_TYPE_VAL(NUM);
 		break;
+	case PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE:
+		CHECK_TYPE_VAL(NUM);
+		if (term->val.num > UINT_MAX) {
+			parse_events__handle_error(err, term->err_val,
+						strdup("too big"),
+						NULL);
+			return -EINVAL;
+		}
+		break;
 	default:
 		parse_events__handle_error(err, term->err_term,
 				strdup("unknown term"),
@@ -1177,6 +1187,7 @@ static int config_term_tracepoint(struct perf_event_attr *attr,
 	case PARSE_EVENTS__TERM_TYPE_OVERWRITE:
 	case PARSE_EVENTS__TERM_TYPE_NOOVERWRITE:
 	case PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT:
+	case PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE:
 		return config_term_common(attr, term, err);
 	default:
 		if (err) {
@@ -1272,6 +1283,9 @@ do {								\
 		case PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT:
 			ADD_CONFIG_TERM(AUX_OUTPUT, aux_output, term->val.num ? 1 : 0);
 			break;
+		case PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE:
+			ADD_CONFIG_TERM(AUX_SAMPLE_SIZE, aux_sample_size, term->val.num);
+			break;
 		default:
 			break;
 		}
tools/perf/util/parse-events.h +1 -0
index ff367f2..27596cb 100644
@@ -77,6 +77,7 @@ enum {
 	PARSE_EVENTS__TERM_TYPE_DRV_CFG,
 	PARSE_EVENTS__TERM_TYPE_PERCORE,
 	PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT,
+	PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE,
 	__PARSE_EVENTS__TERM_TYPE_NR,
 };
 
tools/perf/util/parse-events.l +1 -0
index 7469497..7b1c8ee 100644
@@ -285,6 +285,7 @@ overwrite		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_OVERWRITE); }
 no-overwrite		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NOOVERWRITE); }
 percore			{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_PERCORE); }
 aux-output		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_AUX_OUTPUT); }
+aux-sample-size		{ return term(yyscanner, PARSE_EVENTS__TERM_TYPE_AUX_SAMPLE_SIZE); }
 ,			{ return ','; }
 "/"			{ BEGIN(INITIAL); return '/'; }
 {name_minus}		{ return str(yyscanner, PE_NAME); }
author reviewer
#15 lore raw

PATCH 8/15 perf inject: Cut AUX area samples

In reply to Adrian Hunter

After decoding AUX area samples, the AUX area data is no longer needed (having been replaced by synthesized events) so cut it out.

---
 tools/perf/builtin-inject.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
tools/perf/builtin-inject.c +29 -0
index 1e5d28311e14..9664a72a089d 100644
@@ -45,6 +45,7 @@ struct perf_inject {
 	u64			aux_id;
 	struct list_head	samples;
 	struct itrace_synth_opts itrace_synth_opts;
+	char			event_copy[PERF_SAMPLE_MAX_SIZE];
 };
 
 struct event_entry {
@@ -214,6 +215,28 @@ static int perf_event__drop_aux(struct perf_tool *tool,
 	return 0;
 }
 
+static union perf_event *
+perf_inject__cut_auxtrace_sample(struct perf_inject *inject,
+				 union perf_event *event,
+				 struct perf_sample *sample)
+{
+	size_t sz1 = sample->aux_sample.data - (void *)event;
+	size_t sz2 = event->header.size - sample->aux_sample.size - sz1;
+	union perf_event *ev = (union perf_event *)inject->event_copy;
+
+	if (sz1 > event->header.size || sz2 > event->header.size ||
+	    sz1 + sz2 > event->header.size ||
+	    sz1 < sizeof(struct perf_event_header) + sizeof(u64))
+		return event;
+
+	memcpy(ev, event, sz1);
+	memcpy((void *)ev + sz1, (void *)event + event->header.size - sz2, sz2);
+	ev->header.size = sz1 + sz2;
+	((u64 *)((void *)ev + sz1))[-1] = 0;
+
+	return ev;
+}
+
 typedef int (*inject_handler)(struct perf_tool *tool,
 			      union perf_event *event,
 			      struct perf_sample *sample,
@@ -226,6 +249,9 @@ static int perf_event__repipe_sample(struct perf_tool *tool,
 				     struct evsel *evsel,
 				     struct machine *machine)
 {
+	struct perf_inject *inject = container_of(tool, struct perf_inject,
+						  tool);
+
 	if (evsel && evsel->handler) {
 		inject_handler f = evsel->handler;
 		return f(tool, event, sample, evsel, machine);
@@ -233,6 +259,9 @@ static int perf_event__repipe_sample(struct perf_tool *tool,
 
 	build_id__mark_dso_hit(tool, event, sample, evsel, machine);
 
+	if (inject->itrace_synth_opts.set && sample->aux_sample.size)
+		event = perf_inject__cut_auxtrace_sample(inject, event, sample);
+
 	return perf_event__repipe_synth(tool, event);
 }
 
Signature · 1 line
2.17.1
merge bot Applied
#16 lore raw

[tip: perf/core] perf inject: Cut AUX area samples

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     ba2675bf15fc3ec1d54b9bf938cf5b28392f79fb
Gitweb:        https://git.kernel.org/tip/ba2675bf15fc3ec1d54b9bf938cf5b28392f79fb
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:18 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf inject: Cut AUX area samples

After decoding AUX area samples, the AUX area data is no longer needed (having been replaced by synthesized events) so cut it out.

---
 tools/perf/builtin-inject.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
tools/perf/builtin-inject.c +29 -0
index 1e5d283..9664a72 100644
@@ -45,6 +45,7 @@ struct perf_inject {
 	u64			aux_id;
 	struct list_head	samples;
 	struct itrace_synth_opts itrace_synth_opts;
+	char			event_copy[PERF_SAMPLE_MAX_SIZE];
 };
 
 struct event_entry {
@@ -214,6 +215,28 @@ static int perf_event__drop_aux(struct perf_tool *tool,
 	return 0;
 }
 
+static union perf_event *
+perf_inject__cut_auxtrace_sample(struct perf_inject *inject,
+				 union perf_event *event,
+				 struct perf_sample *sample)
+{
+	size_t sz1 = sample->aux_sample.data - (void *)event;
+	size_t sz2 = event->header.size - sample->aux_sample.size - sz1;
+	union perf_event *ev = (union perf_event *)inject->event_copy;
+
+	if (sz1 > event->header.size || sz2 > event->header.size ||
+	    sz1 + sz2 > event->header.size ||
+	    sz1 < sizeof(struct perf_event_header) + sizeof(u64))
+		return event;
+
+	memcpy(ev, event, sz1);
+	memcpy((void *)ev + sz1, (void *)event + event->header.size - sz2, sz2);
+	ev->header.size = sz1 + sz2;
+	((u64 *)((void *)ev + sz1))[-1] = 0;
+
+	return ev;
+}
+
 typedef int (*inject_handler)(struct perf_tool *tool,
 			      union perf_event *event,
 			      struct perf_sample *sample,
@@ -226,6 +249,9 @@ static int perf_event__repipe_sample(struct perf_tool *tool,
 				     struct evsel *evsel,
 				     struct machine *machine)
 {
+	struct perf_inject *inject = container_of(tool, struct perf_inject,
+						  tool);
+
 	if (evsel && evsel->handler) {
 		inject_handler f = evsel->handler;
 		return f(tool, event, sample, evsel, machine);
@@ -233,6 +259,9 @@ static int perf_event__repipe_sample(struct perf_tool *tool,
 
 	build_id__mark_dso_hit(tool, event, sample, evsel, machine);
 
+	if (inject->itrace_synth_opts.set && sample->aux_sample.size)
+		event = perf_inject__cut_auxtrace_sample(inject, event, sample);
+
 	return perf_event__repipe_synth(tool, event);
 }
 
author reviewer
#17 lore raw

PATCH 9/15 perf auxtrace: Add support for dumping AUX area samples

In reply to Adrian Hunter

Add support for dumping AUX area samples i.e. via the perf script/report
-D (--dump-raw-trace) option.

---
 tools/perf/util/auxtrace.c | 10 ++++++++++
 tools/perf/util/auxtrace.h | 11 +++++++++++
 tools/perf/util/session.c  |  9 +++++++--
 3 files changed, 28 insertions(+), 2 deletions(-)
tools/perf/util/auxtrace.c +10 -0
index 026585b67a3c..4f5c5fe3516b 100644
@@ -2417,6 +2417,16 @@ int auxtrace__process_event(struct perf_session *session, union perf_event *even
 	return session->auxtrace->process_event(session, event, sample, tool);
 }
 
+void auxtrace__dump_auxtrace_sample(struct perf_session *session,
+				    struct perf_sample *sample)
+{
+	if (!session->auxtrace || !session->auxtrace->dump_auxtrace_sample ||
+	    auxtrace__dont_decode(session))
+		return;
+
+	session->auxtrace->dump_auxtrace_sample(session, sample);
+}
+
 int auxtrace__flush_events(struct perf_session *session, struct perf_tool *tool)
 {
 	if (!session->auxtrace)
tools/perf/util/auxtrace.h +11 -0
index 12b02eb4e01c..7ca3e6dcf8b8 100644
@@ -141,6 +141,7 @@ struct auxtrace_index {
  * struct auxtrace - session callbacks to allow AUX area data decoding.
  * @process_event: lets the decoder see all session events
  * @process_auxtrace_event: process a PERF_RECORD_AUXTRACE event
+ * @dump_auxtrace_sample: dump AUX area sample data
  * @flush_events: process any remaining data
  * @free_events: free resources associated with event processing
  * @free: free resources associated with the session
@@ -153,6 +154,8 @@ struct auxtrace {
 	int (*process_auxtrace_event)(struct perf_session *session,
 				      union perf_event *event,
 				      struct perf_tool *tool);
+	void (*dump_auxtrace_sample)(struct perf_session *session,
+				     struct perf_sample *sample);
 	int (*flush_events)(struct perf_session *session,
 			    struct perf_tool *tool);
 	void (*free_events)(struct perf_session *session);
@@ -555,6 +558,8 @@ int auxtrace_parse_filters(struct evlist *evlist);
 
 int auxtrace__process_event(struct perf_session *session, union perf_event *event,
 			    struct perf_sample *sample, struct perf_tool *tool);
+void auxtrace__dump_auxtrace_sample(struct perf_session *session,
+				    struct perf_sample *sample);
 int auxtrace__flush_events(struct perf_session *session, struct perf_tool *tool);
 void auxtrace__free_events(struct perf_session *session);
 void auxtrace__free(struct perf_session *session);
@@ -673,6 +678,12 @@ int auxtrace__process_event(struct perf_session *session __maybe_unused,
 	return 0;
 }
 
+static inline
+void auxtrace__dump_auxtrace_sample(struct perf_session *session,
+				    struct perf_sample *sample)
+{
+}
+
 static inline
 int auxtrace__flush_events(struct perf_session *session __maybe_unused,
 			   struct perf_tool *tool __maybe_unused)
tools/perf/util/session.c +7 -2
index eb7ffd5524dc..72a1f73c2878 100644
@@ -1496,8 +1496,13 @@ static int perf_session__deliver_event(struct perf_session *session,
 	if (ret > 0)
 		return 0;
 
-	return machines__deliver_event(&session->machines, session->evlist,
-				       event, &sample, tool, file_offset);
+	ret = machines__deliver_event(&session->machines, session->evlist,
+				      event, &sample, tool, file_offset);
+
+	if (dump_trace && sample.aux_sample.size)
+		auxtrace__dump_auxtrace_sample(session, &sample);
+
+	return ret;
 }
 
 static s64 perf_session__process_user_event(struct perf_session *session,
Signature · 1 line
2.17.1
merge bot Applied
#18 lore raw

[tip: perf/core] perf auxtrace: Add support for dumping AUX area samples

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     b04b8dd1e4265525dbd74647f747e63e85540189
Gitweb:        https://git.kernel.org/tip/b04b8dd1e4265525dbd74647f747e63e85540189
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:19 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf auxtrace: Add support for dumping AUX area samples

Add support for dumping AUX area samples i.e. via the perf script/report
-D (--dump-raw-trace) option.

Committer notes:

Add __maybe_unused to the two args for auxtrace__dump_auxtrace_sample() for when we don't HAVE_AUXTRACE_SUPPORT.

---
 tools/perf/util/auxtrace.c | 10 ++++++++++
 tools/perf/util/auxtrace.h | 11 +++++++++++
 tools/perf/util/session.c  |  9 +++++++--
 3 files changed, 28 insertions(+), 2 deletions(-)
tools/perf/util/auxtrace.c +10 -0
index 026585b..4f5c5fe 100644
@@ -2417,6 +2417,16 @@ int auxtrace__process_event(struct perf_session *session, union perf_event *even
 	return session->auxtrace->process_event(session, event, sample, tool);
 }
 
+void auxtrace__dump_auxtrace_sample(struct perf_session *session,
+				    struct perf_sample *sample)
+{
+	if (!session->auxtrace || !session->auxtrace->dump_auxtrace_sample ||
+	    auxtrace__dont_decode(session))
+		return;
+
+	session->auxtrace->dump_auxtrace_sample(session, sample);
+}
+
 int auxtrace__flush_events(struct perf_session *session, struct perf_tool *tool)
 {
 	if (!session->auxtrace)
tools/perf/util/auxtrace.h +11 -0
index ab48de1..4a8ac7d 100644
@@ -141,6 +141,7 @@ struct auxtrace_index {
  * struct auxtrace - session callbacks to allow AUX area data decoding.
  * @process_event: lets the decoder see all session events
  * @process_auxtrace_event: process a PERF_RECORD_AUXTRACE event
+ * @dump_auxtrace_sample: dump AUX area sample data
  * @flush_events: process any remaining data
  * @free_events: free resources associated with event processing
  * @free: free resources associated with the session
@@ -153,6 +154,8 @@ struct auxtrace {
 	int (*process_auxtrace_event)(struct perf_session *session,
 				      union perf_event *event,
 				      struct perf_tool *tool);
+	void (*dump_auxtrace_sample)(struct perf_session *session,
+				     struct perf_sample *sample);
 	int (*flush_events)(struct perf_session *session,
 			    struct perf_tool *tool);
 	void (*free_events)(struct perf_session *session);
@@ -555,6 +558,8 @@ int auxtrace_parse_filters(struct evlist *evlist);
 
 int auxtrace__process_event(struct perf_session *session, union perf_event *event,
 			    struct perf_sample *sample, struct perf_tool *tool);
+void auxtrace__dump_auxtrace_sample(struct perf_session *session,
+				    struct perf_sample *sample);
 int auxtrace__flush_events(struct perf_session *session, struct perf_tool *tool);
 void auxtrace__free_events(struct perf_session *session);
 void auxtrace__free(struct perf_session *session);
@@ -675,6 +680,12 @@ int auxtrace__process_event(struct perf_session *session __maybe_unused,
 }
 
 static inline
+void auxtrace__dump_auxtrace_sample(struct perf_session *session __maybe_unused,
+				    struct perf_sample *sample __maybe_unused)
+{
+}
+
+static inline
 int auxtrace__flush_events(struct perf_session *session __maybe_unused,
 			   struct perf_tool *tool __maybe_unused)
 {
tools/perf/util/session.c +7 -2
index dbdb476..ab4dae1 100644
@@ -1496,8 +1496,13 @@ static int perf_session__deliver_event(struct perf_session *session,
 	if (ret > 0)
 		return 0;
 
-	return machines__deliver_event(&session->machines, session->evlist,
-				       event, &sample, tool, file_offset);
+	ret = machines__deliver_event(&session->machines, session->evlist,
+				      event, &sample, tool, file_offset);
+
+	if (dump_trace && sample.aux_sample.size)
+		auxtrace__dump_auxtrace_sample(session, &sample);
+
+	return ret;
 }
 
 static s64 perf_session__process_user_event(struct perf_session *session,
author reviewer
#19 lore raw

PATCH 10/15 perf session: Add facility to peek at all events

In reply to Adrian Hunter

AUX area samples are not limited in how far back in time the sample could start. Consequently samples must be queued in advance to allow for time-ordered processing. To achieve that, add perf_session__peek_events() that walks and peeks at all the events.

---
 tools/perf/util/session.c | 28 ++++++++++++++++++++++++++++
 tools/perf/util/session.h |  5 +++++
 2 files changed, 33 insertions(+)
tools/perf/util/session.c +28 -0
index 72a1f73c2878..cd0c4ce1edca 100644
@@ -1659,6 +1659,34 @@ int perf_session__peek_event(struct perf_session *session, off_t file_offset,
 	return 0;
 }
 
+int perf_session__peek_events(struct perf_session *session, u64 offset,
+			      u64 size, peek_events_cb_t cb, void *data)
+{
+	u64 max_offset = offset + size;
+	char buf[PERF_SAMPLE_MAX_SIZE];
+	union perf_event *event;
+	int err;
+
+	do {
+		err = perf_session__peek_event(session, offset, buf,
+					       PERF_SAMPLE_MAX_SIZE, &event,
+					       NULL);
+		if (err)
+			return err;
+
+		err = cb(session, event, offset, data);
+		if (err)
+			return err;
+
+		offset += event->header.size;
+		if (event->header.type == PERF_RECORD_AUXTRACE)
+			offset += event->auxtrace.size;
+
+	} while (offset < max_offset);
+
+	return err;
+}
+
 static s64 perf_session__process_event(struct perf_session *session,
 				       union perf_event *event, u64 file_offset)
 {
tools/perf/util/session.h +5 -0
index 8456e1d868fd..f76480166d38 100644
@@ -64,6 +64,11 @@ int perf_session__peek_event(struct perf_session *session, off_t file_offset,
 			     void *buf, size_t buf_sz,
 			     union perf_event **event_ptr,
 			     struct perf_sample *sample);
+typedef int (*peek_events_cb_t)(struct perf_session *session,
+				union perf_event *event, u64 offset,
+				void *data);
+int perf_session__peek_events(struct perf_session *session, u64 offset,
+			      u64 size, peek_events_cb_t cb, void *data);
 
 int perf_session__process_events(struct perf_session *session);
 
Signature · 1 line
2.17.1
merge bot Applied
#20 lore raw

[tip: perf/core] perf session: Add facility to peek at all events

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     103ed40e4bfa6986d80983b3e67be9d2f61fc9ee
Gitweb:        https://git.kernel.org/tip/103ed40e4bfa6986d80983b3e67be9d2f61fc9ee
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:20 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf session: Add facility to peek at all events

AUX area samples are not limited in how far back in time the sample could start. Consequently samples must be queued in advance to allow for time-ordered processing. To achieve that, add perf_session__peek_events() that walks and peeks at all the events.

---
 tools/perf/util/session.c | 28 ++++++++++++++++++++++++++++
 tools/perf/util/session.h |  5 +++++
 2 files changed, 33 insertions(+)
tools/perf/util/session.c +28 -0
index ab4dae1..d0d7d25 100644
@@ -1659,6 +1659,34 @@ out_parse_sample:
 	return 0;
 }
 
+int perf_session__peek_events(struct perf_session *session, u64 offset,
+			      u64 size, peek_events_cb_t cb, void *data)
+{
+	u64 max_offset = offset + size;
+	char buf[PERF_SAMPLE_MAX_SIZE];
+	union perf_event *event;
+	int err;
+
+	do {
+		err = perf_session__peek_event(session, offset, buf,
+					       PERF_SAMPLE_MAX_SIZE, &event,
+					       NULL);
+		if (err)
+			return err;
+
+		err = cb(session, event, offset, data);
+		if (err)
+			return err;
+
+		offset += event->header.size;
+		if (event->header.type == PERF_RECORD_AUXTRACE)
+			offset += event->auxtrace.size;
+
+	} while (offset < max_offset);
+
+	return err;
+}
+
 static s64 perf_session__process_event(struct perf_session *session,
 				       union perf_event *event, u64 file_offset)
 {
tools/perf/util/session.h +5 -0
index 8456e1d..f764801 100644
@@ -64,6 +64,11 @@ int perf_session__peek_event(struct perf_session *session, off_t file_offset,
 			     void *buf, size_t buf_sz,
 			     union perf_event **event_ptr,
 			     struct perf_sample *sample);
+typedef int (*peek_events_cb_t)(struct perf_session *session,
+				union perf_event *event, u64 offset,
+				void *data);
+int perf_session__peek_events(struct perf_session *session, u64 offset,
+			      u64 size, peek_events_cb_t cb, void *data);
 
 int perf_session__process_events(struct perf_session *session);
 
author reviewer
#21 lore raw

PATCH 11/15 perf auxtrace: Add support for queuing AUX area samples

In reply to Adrian Hunter

Add functions to queue AUX area samples in advance (auxtrace_queue_data()) or individually (auxtrace_queues__add_sample()) or find out what queue a sample belongs on (auxtrace_queues__sample_queue()).

auxtrace_queue_data() can also queue snapshot data which keeps snapshots and samples ordered with respect to each other in case support for that is desired.

---
 tools/perf/util/auxtrace.c | 107 +++++++++++++++++++++++++++++++++++++
 tools/perf/util/auxtrace.h |  15 ++++++
 2 files changed, 122 insertions(+)
tools/perf/util/auxtrace.c +107 -0
index 4f5c5fe3516b..eb087e7df6f4 100644
@@ -1004,6 +1004,113 @@ struct auxtrace_buffer *auxtrace_buffer__next(struct auxtrace_queue *queue,
 	}
 }
 
+struct auxtrace_queue *auxtrace_queues__sample_queue(struct auxtrace_queues *queues,
+						     struct perf_sample *sample,
+						     struct perf_session *session)
+{
+	struct perf_sample_id *sid;
+	unsigned int idx;
+	u64 id;
+
+	id = sample->id;
+	if (!id)
+		return NULL;
+
+	sid = perf_evlist__id2sid(session->evlist, id);
+	if (!sid)
+		return NULL;
+
+	idx = sid->idx;
+
+	if (idx >= queues->nr_queues)
+		return NULL;
+
+	return &queues->queue_array[idx];
+}
+
+int auxtrace_queues__add_sample(struct auxtrace_queues *queues,
+				struct perf_session *session,
+				struct perf_sample *sample, u64 data_offset,
+				u64 reference)
+{
+	struct auxtrace_buffer buffer = {
+		.pid = -1,
+		.data_offset = data_offset,
+		.reference = reference,
+		.size = sample->aux_sample.size,
+	};
+	struct perf_sample_id *sid;
+	u64 id = sample->id;
+	unsigned int idx;
+
+	if (!id)
+		return -EINVAL;
+
+	sid = perf_evlist__id2sid(session->evlist, id);
+	if (!sid)
+		return -ENOENT;
+
+	idx = sid->idx;
+	buffer.tid = sid->tid;
+	buffer.cpu = sid->cpu;
+
+	return auxtrace_queues__add_buffer(queues, session, idx, &buffer, NULL);
+}
+
+struct queue_data {
+	bool samples;
+	bool events;
+};
+
+static int auxtrace_queue_data_cb(struct perf_session *session,
+				  union perf_event *event, u64 offset,
+				  void *data)
+{
+	struct queue_data *qd = data;
+	struct perf_sample sample;
+	int err;
+
+	if (qd->events && event->header.type == PERF_RECORD_AUXTRACE) {
+		if (event->header.size < sizeof(struct perf_record_auxtrace))
+			return -EINVAL;
+		offset += event->header.size;
+		return session->auxtrace->queue_data(session, NULL, event,
+						     offset);
+	}
+
+	if (!qd->samples || event->header.type != PERF_RECORD_SAMPLE)
+		return 0;
+
+	err = perf_evlist__parse_sample(session->evlist, event, &sample);
+	if (err)
+		return err;
+
+	if (!sample.aux_sample.size)
+		return 0;
+
+	offset += sample.aux_sample.data - (void *)event;
+
+	return session->auxtrace->queue_data(session, &sample, NULL, offset);
+}
+
+int auxtrace_queue_data(struct perf_session *session, bool samples, bool events)
+{
+	struct queue_data qd = {
+		.samples = samples,
+		.events = events,
+	};
+
+	if (auxtrace__dont_decode(session))
+		return 0;
+
+	if (!session->auxtrace || !session->auxtrace->queue_data)
+		return -EINVAL;
+
+	return perf_session__peek_events(session, session->header.data_offset,
+					 session->header.data_size,
+					 auxtrace_queue_data_cb, &qd);
+}
+
 void *auxtrace_buffer__get_data(struct auxtrace_buffer *buffer, int fd)
 {
 	size_t adj = buffer->data_offset & (page_size - 1);
tools/perf/util/auxtrace.h +15 -0
index 7ca3e6dcf8b8..804847636b38 100644
@@ -141,6 +141,8 @@ struct auxtrace_index {
  * struct auxtrace - session callbacks to allow AUX area data decoding.
  * @process_event: lets the decoder see all session events
  * @process_auxtrace_event: process a PERF_RECORD_AUXTRACE event
+ * @queue_data: queue an AUX sample or PERF_RECORD_AUXTRACE event for later
+ *              processing
  * @dump_auxtrace_sample: dump AUX area sample data
  * @flush_events: process any remaining data
  * @free_events: free resources associated with event processing
@@ -154,6 +156,9 @@ struct auxtrace {
 	int (*process_auxtrace_event)(struct perf_session *session,
 				      union perf_event *event,
 				      struct perf_tool *tool);
+	int (*queue_data)(struct perf_session *session,
+			  struct perf_sample *sample, union perf_event *event,
+			  u64 data_offset);
 	void (*dump_auxtrace_sample)(struct perf_session *session,
 				     struct perf_sample *sample);
 	int (*flush_events)(struct perf_session *session,
@@ -467,9 +472,19 @@ int auxtrace_queues__add_event(struct auxtrace_queues *queues,
 			       struct perf_session *session,
 			       union perf_event *event, off_t data_offset,
 			       struct auxtrace_buffer **buffer_ptr);
+struct auxtrace_queue *
+auxtrace_queues__sample_queue(struct auxtrace_queues *queues,
+			      struct perf_sample *sample,
+			      struct perf_session *session);
+int auxtrace_queues__add_sample(struct auxtrace_queues *queues,
+				struct perf_session *session,
+				struct perf_sample *sample, u64 data_offset,
+				u64 reference);
 void auxtrace_queues__free(struct auxtrace_queues *queues);
 int auxtrace_queues__process_index(struct auxtrace_queues *queues,
 				   struct perf_session *session);
+int auxtrace_queue_data(struct perf_session *session, bool samples,
+			bool events);
 struct auxtrace_buffer *auxtrace_buffer__next(struct auxtrace_queue *queue,
 					      struct auxtrace_buffer *buffer);
 void *auxtrace_buffer__get_data(struct auxtrace_buffer *buffer, int fd);
Signature · 1 line
2.17.1
merge bot Applied
#22 lore raw

[tip: perf/core] perf auxtrace: Add support for queuing AUX area samples

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     ac2f445fc8989e152dc35eb7af368fd34b92e48a
Gitweb:        https://git.kernel.org/tip/ac2f445fc8989e152dc35eb7af368fd34b92e48a
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:21 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf auxtrace: Add support for queuing AUX area samples

Add functions to queue AUX area samples in advance (auxtrace_queue_data()) or individually (auxtrace_queues__add_sample()) or find out what queue a sample belongs on (auxtrace_queues__sample_queue()).

auxtrace_queue_data() can also queue snapshot data which keeps snapshots and samples ordered with respect to each other in case support for that is desired.

---
 tools/perf/util/auxtrace.c | 107 ++++++++++++++++++++++++++++++++++++-
 tools/perf/util/auxtrace.h |  15 +++++-
 2 files changed, 122 insertions(+)
tools/perf/util/auxtrace.c +107 -0
index 4f5c5fe..eb087e7 100644
@@ -1004,6 +1004,113 @@ struct auxtrace_buffer *auxtrace_buffer__next(struct auxtrace_queue *queue,
 	}
 }
 
+struct auxtrace_queue *auxtrace_queues__sample_queue(struct auxtrace_queues *queues,
+						     struct perf_sample *sample,
+						     struct perf_session *session)
+{
+	struct perf_sample_id *sid;
+	unsigned int idx;
+	u64 id;
+
+	id = sample->id;
+	if (!id)
+		return NULL;
+
+	sid = perf_evlist__id2sid(session->evlist, id);
+	if (!sid)
+		return NULL;
+
+	idx = sid->idx;
+
+	if (idx >= queues->nr_queues)
+		return NULL;
+
+	return &queues->queue_array[idx];
+}
+
+int auxtrace_queues__add_sample(struct auxtrace_queues *queues,
+				struct perf_session *session,
+				struct perf_sample *sample, u64 data_offset,
+				u64 reference)
+{
+	struct auxtrace_buffer buffer = {
+		.pid = -1,
+		.data_offset = data_offset,
+		.reference = reference,
+		.size = sample->aux_sample.size,
+	};
+	struct perf_sample_id *sid;
+	u64 id = sample->id;
+	unsigned int idx;
+
+	if (!id)
+		return -EINVAL;
+
+	sid = perf_evlist__id2sid(session->evlist, id);
+	if (!sid)
+		return -ENOENT;
+
+	idx = sid->idx;
+	buffer.tid = sid->tid;
+	buffer.cpu = sid->cpu;
+
+	return auxtrace_queues__add_buffer(queues, session, idx, &buffer, NULL);
+}
+
+struct queue_data {
+	bool samples;
+	bool events;
+};
+
+static int auxtrace_queue_data_cb(struct perf_session *session,
+				  union perf_event *event, u64 offset,
+				  void *data)
+{
+	struct queue_data *qd = data;
+	struct perf_sample sample;
+	int err;
+
+	if (qd->events && event->header.type == PERF_RECORD_AUXTRACE) {
+		if (event->header.size < sizeof(struct perf_record_auxtrace))
+			return -EINVAL;
+		offset += event->header.size;
+		return session->auxtrace->queue_data(session, NULL, event,
+						     offset);
+	}
+
+	if (!qd->samples || event->header.type != PERF_RECORD_SAMPLE)
+		return 0;
+
+	err = perf_evlist__parse_sample(session->evlist, event, &sample);
+	if (err)
+		return err;
+
+	if (!sample.aux_sample.size)
+		return 0;
+
+	offset += sample.aux_sample.data - (void *)event;
+
+	return session->auxtrace->queue_data(session, &sample, NULL, offset);
+}
+
+int auxtrace_queue_data(struct perf_session *session, bool samples, bool events)
+{
+	struct queue_data qd = {
+		.samples = samples,
+		.events = events,
+	};
+
+	if (auxtrace__dont_decode(session))
+		return 0;
+
+	if (!session->auxtrace || !session->auxtrace->queue_data)
+		return -EINVAL;
+
+	return perf_session__peek_events(session, session->header.data_offset,
+					 session->header.data_size,
+					 auxtrace_queue_data_cb, &qd);
+}
+
 void *auxtrace_buffer__get_data(struct auxtrace_buffer *buffer, int fd)
 {
 	size_t adj = buffer->data_offset & (page_size - 1);
tools/perf/util/auxtrace.h +15 -0
index 4a8ac7d..749d72c 100644
@@ -141,6 +141,8 @@ struct auxtrace_index {
  * struct auxtrace - session callbacks to allow AUX area data decoding.
  * @process_event: lets the decoder see all session events
  * @process_auxtrace_event: process a PERF_RECORD_AUXTRACE event
+ * @queue_data: queue an AUX sample or PERF_RECORD_AUXTRACE event for later
+ *              processing
  * @dump_auxtrace_sample: dump AUX area sample data
  * @flush_events: process any remaining data
  * @free_events: free resources associated with event processing
@@ -154,6 +156,9 @@ struct auxtrace {
 	int (*process_auxtrace_event)(struct perf_session *session,
 				      union perf_event *event,
 				      struct perf_tool *tool);
+	int (*queue_data)(struct perf_session *session,
+			  struct perf_sample *sample, union perf_event *event,
+			  u64 data_offset);
 	void (*dump_auxtrace_sample)(struct perf_session *session,
 				     struct perf_sample *sample);
 	int (*flush_events)(struct perf_session *session,
@@ -467,9 +472,19 @@ int auxtrace_queues__add_event(struct auxtrace_queues *queues,
 			       struct perf_session *session,
 			       union perf_event *event, off_t data_offset,
 			       struct auxtrace_buffer **buffer_ptr);
+struct auxtrace_queue *
+auxtrace_queues__sample_queue(struct auxtrace_queues *queues,
+			      struct perf_sample *sample,
+			      struct perf_session *session);
+int auxtrace_queues__add_sample(struct auxtrace_queues *queues,
+				struct perf_session *session,
+				struct perf_sample *sample, u64 data_offset,
+				u64 reference);
 void auxtrace_queues__free(struct auxtrace_queues *queues);
 int auxtrace_queues__process_index(struct auxtrace_queues *queues,
 				   struct perf_session *session);
+int auxtrace_queue_data(struct perf_session *session, bool samples,
+			bool events);
 struct auxtrace_buffer *auxtrace_buffer__next(struct auxtrace_queue *queue,
 					      struct auxtrace_buffer *buffer);
 void *auxtrace_buffer__get_data(struct auxtrace_buffer *buffer, int fd);
author reviewer
#23 lore raw

PATCH 12/15 perf pmu: When using default config, record which bits of config were changed by the user

In reply to Adrian Hunter

Default config for a PMU is defined before selected events are parsed. That allows the user-entered config to override the default config.

However that does not allow for changing the default config based on other options.

For example, if the user chooses AUX area sampling mode, in the case of Intel PT, the psb_period needs to be small for sampling, so there is a need to set the default psb_period to 0 (2 KiB) in that case. However that should not override a value set by the user. To allow for that, when using default config, record which bits of config were changed by the user.

---
 tools/perf/util/evsel.c        |  2 ++
 tools/perf/util/evsel_config.h |  2 ++
 tools/perf/util/parse-events.c | 42 +++++++++++++++++++++++++++++++++-
 tools/perf/util/pmu.c          | 10 ++++++++
 tools/perf/util/pmu.h          |  1 +
 5 files changed, 56 insertions(+), 1 deletion(-)
tools/perf/util/evsel.c +2 -0
index ad7665a546cf..f4dea055b080 100644
@@ -849,6 +849,8 @@ static void apply_config_terms(struct evsel *evsel,
 		case PERF_EVSEL__CONFIG_TERM_AUX_SAMPLE_SIZE:
 			/* Already applied by auxtrace */
 			break;
+		case PERF_EVSEL__CONFIG_TERM_CFG_CHG:
+			break;
 		default:
 			break;
 		}
tools/perf/util/evsel_config.h +2 -0
index 6e654ede8fbe..1f8d2fe0b66e 100644
@@ -26,6 +26,7 @@ enum evsel_term_type {
 	PERF_EVSEL__CONFIG_TERM_PERCORE,
 	PERF_EVSEL__CONFIG_TERM_AUX_OUTPUT,
 	PERF_EVSEL__CONFIG_TERM_AUX_SAMPLE_SIZE,
+	PERF_EVSEL__CONFIG_TERM_CFG_CHG,
 };
 
 struct perf_evsel_config_term {
@@ -46,6 +47,7 @@ struct perf_evsel_config_term {
 		bool	      percore;
 		bool	      aux_output;
 		u32	      aux_sample_size;
+		u64	      cfg_chg;
 	} val;
 	bool weak;
 };
tools/perf/util/parse-events.c +41 -1

54 lines not on this page · raw message

tools/perf/util/pmu.c +10 -0
index db1e57113f4b..e8d348988026 100644
@@ -931,6 +931,16 @@ __u64 perf_pmu__format_bits(struct list_head *formats, const char *name)
 	return bits;
 }
 
+int perf_pmu__format_type(struct list_head *formats, const char *name)
+{
+	struct perf_pmu_format *format = pmu_find_format(formats, name);
+
+	if (!format)
+		return -1;
+
+	return format->value;
+}
+
 /*
  * Sets value based on the format definition (format parameter)
  * and unformated value (value parameter).
tools/perf/util/pmu.h +1 -0
index 2eb7a7001307..6737e3d5d568 100644
@@ -72,6 +72,7 @@ int perf_pmu__config_terms(struct list_head *formats,
 			   struct list_head *head_terms,
 			   bool zero, struct parse_events_error *error);
 __u64 perf_pmu__format_bits(struct list_head *formats, const char *name);
+int perf_pmu__format_type(struct list_head *formats, const char *name);
 int perf_pmu__check_alias(struct perf_pmu *pmu, struct list_head *head_terms,
 			  struct perf_pmu_info *info);
 struct list_head *perf_pmu__alias(struct perf_pmu *pmu,
Signature · 1 line
2.17.1
merge bot Applied
#24 lore raw

[tip: perf/core] perf pmu: When using default config, record which bits of config were changed by the user

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     a1ac7de6902c1ea6def7a743f1d2e6ba429684b3
Gitweb:        https://git.kernel.org/tip/a1ac7de6902c1ea6def7a743f1d2e6ba429684b3
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:22 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf pmu: When using default config, record which bits of config were changed by the user

Default config for a PMU is defined before selected events are parsed. That allows the user-entered config to override the default config.

However that does not allow for changing the default config based on other options.

For example, if the user chooses AUX area sampling mode, in the case of Intel PT, the psb_period needs to be small for sampling, so there is a need to set the default psb_period to 0 (2 KiB) in that case. However that should not override a value set by the user. To allow for that, when using default config, record which bits of config were changed by the user.

---
 tools/perf/util/evsel.c        |  2 ++-
 tools/perf/util/evsel_config.h |  2 ++-
 tools/perf/util/parse-events.c | 42 ++++++++++++++++++++++++++++++++-
 tools/perf/util/pmu.c          | 10 ++++++++-
 tools/perf/util/pmu.h          |  1 +-
 5 files changed, 56 insertions(+), 1 deletion(-)
tools/perf/util/evsel.c +2 -0
index ad7665a..f4dea05 100644
@@ -849,6 +849,8 @@ static void apply_config_terms(struct evsel *evsel,
 		case PERF_EVSEL__CONFIG_TERM_AUX_SAMPLE_SIZE:
 			/* Already applied by auxtrace */
 			break;
+		case PERF_EVSEL__CONFIG_TERM_CFG_CHG:
+			break;
 		default:
 			break;
 		}
tools/perf/util/evsel_config.h +2 -0
index 6e654ed..1f8d2fe 100644
@@ -26,6 +26,7 @@ enum evsel_term_type {
 	PERF_EVSEL__CONFIG_TERM_PERCORE,
 	PERF_EVSEL__CONFIG_TERM_AUX_OUTPUT,
 	PERF_EVSEL__CONFIG_TERM_AUX_SAMPLE_SIZE,
+	PERF_EVSEL__CONFIG_TERM_CFG_CHG,
 };
 
 struct perf_evsel_config_term {
@@ -46,6 +47,7 @@ struct perf_evsel_config_term {
 		bool	      percore;
 		bool	      aux_output;
 		u32	      aux_sample_size;
+		u64	      cfg_chg;
 	} val;
 	bool weak;
 };
tools/perf/util/parse-events.c +41 -1

54 lines not on this page · raw message

tools/perf/util/pmu.c +10 -0
index db1e571..e8d3489 100644
@@ -931,6 +931,16 @@ __u64 perf_pmu__format_bits(struct list_head *formats, const char *name)
 	return bits;
 }
 
+int perf_pmu__format_type(struct list_head *formats, const char *name)
+{
+	struct perf_pmu_format *format = pmu_find_format(formats, name);
+
+	if (!format)
+		return -1;
+
+	return format->value;
+}
+
 /*
  * Sets value based on the format definition (format parameter)
  * and unformated value (value parameter).
tools/perf/util/pmu.h +1 -0
index 2eb7a70..6737e3d 100644
@@ -72,6 +72,7 @@ int perf_pmu__config_terms(struct list_head *formats,
 			   struct list_head *head_terms,
 			   bool zero, struct parse_events_error *error);
 __u64 perf_pmu__format_bits(struct list_head *formats, const char *name);
+int perf_pmu__format_type(struct list_head *formats, const char *name);
 int perf_pmu__check_alias(struct perf_pmu *pmu, struct list_head *head_terms,
 			  struct perf_pmu_info *info);
 struct list_head *perf_pmu__alias(struct perf_pmu *pmu,
author reviewer
#25 lore raw

PATCH 13/15 perf intel-pt: Add support for recording AUX area samples

In reply to Adrian Hunter

Set up the default number of mmap pages, default sample size and default psb_period for AUX area sampling. Add documentation also.

---
 tools/perf/Documentation/intel-pt.txt | 59 ++++++++++++++++++-
 tools/perf/arch/x86/util/auxtrace.c   |  2 +
 tools/perf/arch/x86/util/intel-pt.c   | 81 ++++++++++++++++++++++++++-
 3 files changed, 139 insertions(+), 3 deletions(-)
tools/perf/Documentation/intel-pt.txt +57 -2
index e0d9e7dd4f17..2cf2d9e9d0da 100644
@@ -434,6 +434,56 @@ pwr_evt		Enable power events.  The power events provide information about
 		"0" otherwise.
 
 
+AUX area sampling option
+------------------------
+
+To select Intel PT "sampling" the AUX area sampling option can be used:
+
+	--aux-sample
+
+Optionally it can be followed by the sample size in bytes e.g.
+
+	--aux-sample=8192
+
+In addition, the Intel PT event to sample must be defined e.g.
+
+	-e intel_pt//u
+
+Samples on other events will be created containing Intel PT data e.g. the
+following will create Intel PT samples on the branch-misses event, note the
+events must be grouped using {}:
+
+	perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
+
+An alternative to '--aux-sample' is to add the config term 'aux-sample-size' to
+events.  In this case, the grouping is implied e.g.
+
+	perf record -e intel_pt//u -e branch-misses/aux-sample-size=8192/u
+
+is the same as:
+
+	perf record -e '{intel_pt//u,branch-misses/aux-sample-size=8192/u}'
+
+but allows for also using an address filter e.g.:
+
+	perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls
+
+It is important to select a sample size that is big enough to contain at least
+one PSB packet.  If not a warning will be displayed:
+
+	Intel PT sample size (%zu) may be too small for PSB period (%zu)
+
+The calculation used for that is: if sample_size <= psb_period + 256 display the
+warning.  When sampling is used, psb_period defaults to 0 (2KiB).
+
+The default sample size is 4KiB.
+
+The sample size is passed in aux_sample_size in struct perf_event_attr.  The
+sample size is limited by the maximum event size which is 64KiB.  It is
+difficult to know how big the event might be without the trace sample attached,
+but the tool validates that the sample size is not greater than 60KiB.
+
+
 new snapshot option
 -------------------
 
@@ -487,8 +537,8 @@ their mlock limit (which defaults to 64KiB but is not multiplied by the number
 of cpus).
 
 In full-trace mode, powers of two are allowed for buffer size, with a minimum
-size of 2 pages.  In snapshot mode, it is the same but the minimum size is
-1 page.
+size of 2 pages.  In snapshot mode or sampling mode, it is the same but the
+minimum size is 1 page.
 
 The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g.
 
@@ -501,12 +551,17 @@ Intel PT modes of operation
 
 Intel PT can be used in 2 modes:
 	full-trace mode
+	sample mode
 	snapshot mode
 
 Full-trace mode traces continuously e.g.
 
 	perf record -e intel_pt//u uname
 
+Sample mode attaches a Intel PT sample to other events e.g.
+
+	perf record --aux-sample -e intel_pt//u -e branch-misses:u
+
 Snapshot mode captures the available data when a signal is sent e.g.
 
 	perf record -v -e intel_pt//u -S ./loopy 1000000000 &
tools/perf/arch/x86/util/auxtrace.c +2 -0
index 96f4a2c11893..092543cad324 100644
@@ -26,6 +26,8 @@ struct auxtrace_record *auxtrace_record__init_intel(struct evlist *evlist,
 	bool found_bts = false;
 
 	intel_pt_pmu = perf_pmu__find(INTEL_PT_PMU_NAME);
+	if (intel_pt_pmu)
+		intel_pt_pmu->auxtrace = true;
 	intel_bts_pmu = perf_pmu__find(INTEL_BTS_PMU_NAME);
 
 	evlist__for_each_entry(evlist, evsel) {
tools/perf/arch/x86/util/intel-pt.c +80 -1

122 lines not on this page · raw message

Signature · 1 line
2.17.1
#26 lore raw

Re: [PATCH 13/15] perf intel-pt: Add support for recording AUX area samples

Em Fri, Nov 15, 2019 at 02:42:23PM +0200, Adrian Hunter escreveu:

Quoted 41 lines

Set up the default number of mmap pages, default sample size and default psb_period for AUX area sampling. Add documentation also.

---
 tools/perf/Documentation/intel-pt.txt | 59 ++++++++++++++++++-
 tools/perf/arch/x86/util/auxtrace.c   |  2 +
 tools/perf/arch/x86/util/intel-pt.c   | 81 ++++++++++++++++++++++++++-
 3 files changed, 139 insertions(+), 3 deletions(-)
tools/perf/Documentation/intel-pt.txt +23 -0
index e0d9e7dd4f17..2cf2d9e9d0da 100644
@@ -434,6 +434,56 @@ pwr_evt		Enable power events.  The power events provide information about
 		"0" otherwise.
 
 
+AUX area sampling option
+------------------------
+
+To select Intel PT "sampling" the AUX area sampling option can be used:
+
+	--aux-sample
+
+Optionally it can be followed by the sample size in bytes e.g.
+
+	--aux-sample=8192
+
+In addition, the Intel PT event to sample must be defined e.g.
+
+	-e intel_pt//u
+
+Samples on other events will be created containing Intel PT data e.g. the
+following will create Intel PT samples on the branch-misses event, note the
+events must be grouped using {}:
+
+	perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
+
+An alternative to '--aux-sample' is to add the config term 'aux-sample-size' to
+events.  In this case, the grouping is implied e.g.

tools/perf/Documentation/intel-pt.txt pwr_evt Enable power events. The power events provide information about · line 469

Quoted 10 lines
tools/perf/Documentation/intel-pt.txt +10 -0
+
+	perf record -e intel_pt//u -e branch-misses/aux-sample-size=8192/u
+
+is the same as:
+
+	perf record -e '{intel_pt//u,branch-misses/aux-sample-size=8192/u}'
+
+but allows for also using an address filter e.g.:
+
+	perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls

Can we improve this warning?

[root@quaco ~]# perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls Error:
The sys_perf_event_open() syscall returned with 7 (Argument list too long) for event (branch-misses/aux-sample-size=8192/u). /bin/dmesg | grep -i perf may provide additional information.

[root@quaco ~]#
[root@quaco ~]# uname -a
Linux quaco 5.4.0-rc8 #1 SMP Mon Nov 18 06:15:31 -03 2019 x86_64 x86_64 x86_64 GNU/Linux [root@quaco ~]#

Quoted 197 lines
tools/perf/Documentation/intel-pt.txt +24 -2
+
+It is important to select a sample size that is big enough to contain at least
+one PSB packet.  If not a warning will be displayed:
+
+	Intel PT sample size (%zu) may be too small for PSB period (%zu)
+
+The calculation used for that is: if sample_size <= psb_period + 256 display the
+warning.  When sampling is used, psb_period defaults to 0 (2KiB).
+
+The default sample size is 4KiB.
+
+The sample size is passed in aux_sample_size in struct perf_event_attr.  The
+sample size is limited by the maximum event size which is 64KiB.  It is
+difficult to know how big the event might be without the trace sample attached,
+but the tool validates that the sample size is not greater than 60KiB.
+
+
 new snapshot option
 -------------------
 
@@ -487,8 +537,8 @@ their mlock limit (which defaults to 64KiB but is not multiplied by the number
 of cpus).
 
 In full-trace mode, powers of two are allowed for buffer size, with a minimum
-size of 2 pages.  In snapshot mode, it is the same but the minimum size is
-1 page.
+size of 2 pages.  In snapshot mode or sampling mode, it is the same but the
+minimum size is 1 page.
 
 The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g.
 
@@ -501,12 +551,17 @@ Intel PT modes of operation
 
 Intel PT can be used in 2 modes:
 	full-trace mode
+	sample mode
 	snapshot mode
 
 Full-trace mode traces continuously e.g.
 
 	perf record -e intel_pt//u uname
 
+Sample mode attaches a Intel PT sample to other events e.g.
+
+	perf record --aux-sample -e intel_pt//u -e branch-misses:u
+
 Snapshot mode captures the available data when a signal is sent e.g.
 
 	perf record -v -e intel_pt//u -S ./loopy 1000000000 &
tools/perf/arch/x86/util/auxtrace.c +2 -0
index 96f4a2c11893..092543cad324 100644
@@ -26,6 +26,8 @@ struct auxtrace_record *auxtrace_record__init_intel(struct evlist *evlist,
 	bool found_bts = false;
 
 	intel_pt_pmu = perf_pmu__find(INTEL_PT_PMU_NAME);
+	if (intel_pt_pmu)
+		intel_pt_pmu->auxtrace = true;
 	intel_bts_pmu = perf_pmu__find(INTEL_BTS_PMU_NAME);
 
 	evlist__for_each_entry(evlist, evsel) {
tools/perf/arch/x86/util/intel-pt.c +80 -1
index d6d26256915f..20df442fdf36 100644
@@ -17,6 +17,7 @@
 #include "../../util/event.h"
 #include "../../util/evlist.h"
 #include "../../util/evsel.h"
+#include "../../util/evsel_config.h"
 #include "../../util/cpumap.h"
 #include "../../util/mmap.h"
 #include <subcmd/parse-options.h>
@@ -551,6 +552,43 @@ static int intel_pt_validate_config(struct perf_pmu *intel_pt_pmu,
 					evsel->core.attr.config);
 }
 
+static void intel_pt_config_sample_mode(struct perf_pmu *intel_pt_pmu,
+					struct evsel *evsel)
+{
+	struct perf_evsel_config_term *term;
+	u64 user_bits = 0, bits;
+
+	term = perf_evsel__get_config_term(evsel, CFG_CHG);
+	if (term)
+		user_bits = term->val.cfg_chg;
+
+	bits = perf_pmu__format_bits(&intel_pt_pmu->format, "psb_period");
+
+	/* Did user change psb_period */
+	if (bits & user_bits)
+		return;
+
+	/* Set psb_period to 0 */
+	evsel->core.attr.config &= ~bits;
+}
+
+static void intel_pt_min_max_sample_sz(struct evlist *evlist,
+				       size_t *min_sz, size_t *max_sz)
+{
+	struct evsel *evsel;
+
+	evlist__for_each_entry(evlist, evsel) {
+		size_t sz = evsel->core.attr.aux_sample_size;
+
+		if (!sz)
+			continue;
+		if (min_sz && (sz < *min_sz || !*min_sz))
+			*min_sz = sz;
+		if (max_sz && sz > *max_sz)
+			*max_sz = sz;
+	}
+}
+
 /*
  * Currently, there is not enough information to disambiguate different PEBS
  * events, so only allow one.
@@ -606,6 +644,11 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 		return -EINVAL;
 	}
 
+	if (opts->auxtrace_snapshot_mode && opts->auxtrace_sample_mode) {
+		pr_err("Snapshot mode (" INTEL_PT_PMU_NAME " PMU) and sample trace cannot be used together\n");
+		return -EINVAL;
+	}
+
 	if (opts->use_clockid) {
 		pr_err("Cannot use clockid (-k option) with " INTEL_PT_PMU_NAME "\n");
 		return -EINVAL;
@@ -617,6 +660,9 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 	if (!opts->full_auxtrace)
 		return 0;
 
+	if (opts->auxtrace_sample_mode)
+		intel_pt_config_sample_mode(intel_pt_pmu, intel_pt_evsel);
+
 	err = intel_pt_validate_config(intel_pt_pmu, intel_pt_evsel);
 	if (err)
 		return err;
@@ -666,6 +712,34 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 				    opts->auxtrace_snapshot_size, psb_period);
 	}
 
+	/* Set default sizes for sample mode */
+	if (opts->auxtrace_sample_mode) {
+		size_t psb_period = intel_pt_psb_period(intel_pt_pmu, evlist);
+		size_t min_sz = 0, max_sz = 0;
+
+		intel_pt_min_max_sample_sz(evlist, &min_sz, &max_sz);
+		if (!opts->auxtrace_mmap_pages && !privileged &&
+		    opts->mmap_pages == UINT_MAX)
+			opts->mmap_pages = KiB(256) / page_size;
+		if (!opts->auxtrace_mmap_pages) {
+			size_t sz = round_up(max_sz, page_size) / page_size;
+
+			opts->auxtrace_mmap_pages = roundup_pow_of_two(sz);
+		}
+		if (max_sz > opts->auxtrace_mmap_pages * (size_t)page_size) {
+			pr_err("Sample size %zu must not be greater than AUX area tracing mmap size %zu\n",
+			       max_sz,
+			       opts->auxtrace_mmap_pages * (size_t)page_size);
+			return -EINVAL;
+		}
+		pr_debug2("Intel PT min. sample size: %zu max. sample size: %zu\n",
+			  min_sz, max_sz);
+		if (psb_period &&
+		    min_sz <= psb_period + INTEL_PT_PSB_PERIOD_NEAR)
+			ui__warning("Intel PT sample size (%zu) may be too small for PSB period (%zu)\n",
+				    min_sz, psb_period);
+	}
+
 	/* Set default sizes for full trace mode */
 	if (opts->full_auxtrace && !opts->auxtrace_mmap_pages) {
 		if (privileged) {
@@ -682,7 +756,7 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 		size_t sz = opts->auxtrace_mmap_pages * (size_t)page_size;
 		size_t min_sz;
 
-		if (opts->auxtrace_snapshot_mode)
+		if (opts->auxtrace_snapshot_mode || opts->auxtrace_sample_mode)
 			min_sz = KiB(4);
 		else
 			min_sz = KiB(8);
@@ -1136,5 +1210,10 @@ struct auxtrace_record *intel_pt_recording_init(int *err)
 	ptr->itr.parse_snapshot_options = intel_pt_parse_snapshot_options;
 	ptr->itr.reference = intel_pt_reference;
 	ptr->itr.read_finish = intel_pt_read_finish;
+	/*
+	 * Decoding starts at a PSB packet. Minimum PSB period is 2K so 4K
+	 * should give at least 1 PSB per sample.
+	 */
+	ptr->itr.default_aux_sample_size = 4096;
 	return &ptr->itr;
 }
Signature · 1 line
2.17.1
Signature · 1 line
- Arnaldo
#27 lore raw

Re: [PATCH 13/15] perf intel-pt: Add support for recording AUX area samples

Em Thu, Nov 21, 2019 at 11:28:43AM -0300, Arnaldo Carvalho de Melo escreveu:

Quoted 61 lines

Em Fri, Nov 15, 2019 at 02:42:23PM +0200, Adrian Hunter escreveu:

Quoted 41 lines

Set up the default number of mmap pages, default sample size and default psb_period for AUX area sampling. Add documentation also.

---
 tools/perf/Documentation/intel-pt.txt | 59 ++++++++++++++++++-
 tools/perf/arch/x86/util/auxtrace.c   |  2 +
 tools/perf/arch/x86/util/intel-pt.c   | 81 ++++++++++++++++++++++++++-
 3 files changed, 139 insertions(+), 3 deletions(-)
tools/perf/Documentation/intel-pt.txt +23 -0
index e0d9e7dd4f17..2cf2d9e9d0da 100644
@@ -434,6 +434,56 @@ pwr_evt		Enable power events.  The power events provide information about
 		"0" otherwise.
 
 
+AUX area sampling option
+------------------------
+
+To select Intel PT "sampling" the AUX area sampling option can be used:
+
+	--aux-sample
+
+Optionally it can be followed by the sample size in bytes e.g.
+
+	--aux-sample=8192
+
+In addition, the Intel PT event to sample must be defined e.g.
+
+	-e intel_pt//u
+
+Samples on other events will be created containing Intel PT data e.g. the
+following will create Intel PT samples on the branch-misses event, note the
+events must be grouped using {}:
+
+	perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
+
+An alternative to '--aux-sample' is to add the config term 'aux-sample-size' to
+events.  In this case, the grouping is implied e.g.

tools/perf/Documentation/intel-pt.txt pwr_evt Enable power events. The power events provide information about · line 469

Quoted 10 lines
tools/perf/Documentation/intel-pt.txt +10 -0
+
+	perf record -e intel_pt//u -e branch-misses/aux-sample-size=8192/u
+
+is the same as:
+
+	perf record -e '{intel_pt//u,branch-misses/aux-sample-size=8192/u}'
+
+but allows for also using an address filter e.g.:
+
+	perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls

Can we improve this warning?

[root@quaco ~]# perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls Error:
The sys_perf_event_open() syscall returned with 7 (Argument list too long) for event (branch-misses/aux-sample-size=8192/u). /bin/dmesg | grep -i perf may provide additional information.

Quoted 4 lines

[root@quaco ~]#
[root@quaco ~]# uname -a
Linux quaco 5.4.0-rc8 #1 SMP Mon Nov 18 06:15:31 -03 2019 x86_64 x86_64 x86_64 GNU/Linux [root@quaco ~]#

Ditto for this other example:

[root@quaco ~]# perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
Error:
The sys_perf_event_open() syscall returned with 7 (Argument list too long) for event (branch-misses:u). /bin/dmesg | grep -i perf may provide additional information.

[root@quaco ~]#

Quoted 201 lines
Quoted 197 lines
tools/perf/Documentation/intel-pt.txt +24 -2
+
+It is important to select a sample size that is big enough to contain at least
+one PSB packet.  If not a warning will be displayed:
+
+	Intel PT sample size (%zu) may be too small for PSB period (%zu)
+
+The calculation used for that is: if sample_size <= psb_period + 256 display the
+warning.  When sampling is used, psb_period defaults to 0 (2KiB).
+
+The default sample size is 4KiB.
+
+The sample size is passed in aux_sample_size in struct perf_event_attr.  The
+sample size is limited by the maximum event size which is 64KiB.  It is
+difficult to know how big the event might be without the trace sample attached,
+but the tool validates that the sample size is not greater than 60KiB.
+
+
 new snapshot option
 -------------------
 
@@ -487,8 +537,8 @@ their mlock limit (which defaults to 64KiB but is not multiplied by the number
 of cpus).
 
 In full-trace mode, powers of two are allowed for buffer size, with a minimum
-size of 2 pages.  In snapshot mode, it is the same but the minimum size is
-1 page.
+size of 2 pages.  In snapshot mode or sampling mode, it is the same but the
+minimum size is 1 page.
 
 The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g.
 
@@ -501,12 +551,17 @@ Intel PT modes of operation
 
 Intel PT can be used in 2 modes:
 	full-trace mode
+	sample mode
 	snapshot mode
 
 Full-trace mode traces continuously e.g.
 
 	perf record -e intel_pt//u uname
 
+Sample mode attaches a Intel PT sample to other events e.g.
+
+	perf record --aux-sample -e intel_pt//u -e branch-misses:u
+
 Snapshot mode captures the available data when a signal is sent e.g.
 
 	perf record -v -e intel_pt//u -S ./loopy 1000000000 &
tools/perf/arch/x86/util/auxtrace.c +2 -0
index 96f4a2c11893..092543cad324 100644
@@ -26,6 +26,8 @@ struct auxtrace_record *auxtrace_record__init_intel(struct evlist *evlist,
 	bool found_bts = false;
 
 	intel_pt_pmu = perf_pmu__find(INTEL_PT_PMU_NAME);
+	if (intel_pt_pmu)
+		intel_pt_pmu->auxtrace = true;
 	intel_bts_pmu = perf_pmu__find(INTEL_BTS_PMU_NAME);
 
 	evlist__for_each_entry(evlist, evsel) {
tools/perf/arch/x86/util/intel-pt.c +80 -1
index d6d26256915f..20df442fdf36 100644
@@ -17,6 +17,7 @@
 #include "../../util/event.h"
 #include "../../util/evlist.h"
 #include "../../util/evsel.h"
+#include "../../util/evsel_config.h"
 #include "../../util/cpumap.h"
 #include "../../util/mmap.h"
 #include <subcmd/parse-options.h>
@@ -551,6 +552,43 @@ static int intel_pt_validate_config(struct perf_pmu *intel_pt_pmu,
 					evsel->core.attr.config);
 }
 
+static void intel_pt_config_sample_mode(struct perf_pmu *intel_pt_pmu,
+					struct evsel *evsel)
+{
+	struct perf_evsel_config_term *term;
+	u64 user_bits = 0, bits;
+
+	term = perf_evsel__get_config_term(evsel, CFG_CHG);
+	if (term)
+		user_bits = term->val.cfg_chg;
+
+	bits = perf_pmu__format_bits(&intel_pt_pmu->format, "psb_period");
+
+	/* Did user change psb_period */
+	if (bits & user_bits)
+		return;
+
+	/* Set psb_period to 0 */
+	evsel->core.attr.config &= ~bits;
+}
+
+static void intel_pt_min_max_sample_sz(struct evlist *evlist,
+				       size_t *min_sz, size_t *max_sz)
+{
+	struct evsel *evsel;
+
+	evlist__for_each_entry(evlist, evsel) {
+		size_t sz = evsel->core.attr.aux_sample_size;
+
+		if (!sz)
+			continue;
+		if (min_sz && (sz < *min_sz || !*min_sz))
+			*min_sz = sz;
+		if (max_sz && sz > *max_sz)
+			*max_sz = sz;
+	}
+}
+
 /*
  * Currently, there is not enough information to disambiguate different PEBS
  * events, so only allow one.
@@ -606,6 +644,11 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 		return -EINVAL;
 	}
 
+	if (opts->auxtrace_snapshot_mode && opts->auxtrace_sample_mode) {
+		pr_err("Snapshot mode (" INTEL_PT_PMU_NAME " PMU) and sample trace cannot be used together\n");
+		return -EINVAL;
+	}
+
 	if (opts->use_clockid) {
 		pr_err("Cannot use clockid (-k option) with " INTEL_PT_PMU_NAME "\n");
 		return -EINVAL;
@@ -617,6 +660,9 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 	if (!opts->full_auxtrace)
 		return 0;
 
+	if (opts->auxtrace_sample_mode)
+		intel_pt_config_sample_mode(intel_pt_pmu, intel_pt_evsel);
+
 	err = intel_pt_validate_config(intel_pt_pmu, intel_pt_evsel);
 	if (err)
 		return err;
@@ -666,6 +712,34 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 				    opts->auxtrace_snapshot_size, psb_period);
 	}
 
+	/* Set default sizes for sample mode */
+	if (opts->auxtrace_sample_mode) {
+		size_t psb_period = intel_pt_psb_period(intel_pt_pmu, evlist);
+		size_t min_sz = 0, max_sz = 0;
+
+		intel_pt_min_max_sample_sz(evlist, &min_sz, &max_sz);
+		if (!opts->auxtrace_mmap_pages && !privileged &&
+		    opts->mmap_pages == UINT_MAX)
+			opts->mmap_pages = KiB(256) / page_size;
+		if (!opts->auxtrace_mmap_pages) {
+			size_t sz = round_up(max_sz, page_size) / page_size;
+
+			opts->auxtrace_mmap_pages = roundup_pow_of_two(sz);
+		}
+		if (max_sz > opts->auxtrace_mmap_pages * (size_t)page_size) {
+			pr_err("Sample size %zu must not be greater than AUX area tracing mmap size %zu\n",
+			       max_sz,
+			       opts->auxtrace_mmap_pages * (size_t)page_size);
+			return -EINVAL;
+		}
+		pr_debug2("Intel PT min. sample size: %zu max. sample size: %zu\n",
+			  min_sz, max_sz);
+		if (psb_period &&
+		    min_sz <= psb_period + INTEL_PT_PSB_PERIOD_NEAR)
+			ui__warning("Intel PT sample size (%zu) may be too small for PSB period (%zu)\n",
+				    min_sz, psb_period);
+	}
+
 	/* Set default sizes for full trace mode */
 	if (opts->full_auxtrace && !opts->auxtrace_mmap_pages) {
 		if (privileged) {
@@ -682,7 +756,7 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 		size_t sz = opts->auxtrace_mmap_pages * (size_t)page_size;
 		size_t min_sz;
 
-		if (opts->auxtrace_snapshot_mode)
+		if (opts->auxtrace_snapshot_mode || opts->auxtrace_sample_mode)
 			min_sz = KiB(4);
 		else
 			min_sz = KiB(8);
@@ -1136,5 +1210,10 @@ struct auxtrace_record *intel_pt_recording_init(int *err)
 	ptr->itr.parse_snapshot_options = intel_pt_parse_snapshot_options;
 	ptr->itr.reference = intel_pt_reference;
 	ptr->itr.read_finish = intel_pt_read_finish;
+	/*
+	 * Decoding starts at a PSB packet. Minimum PSB period is 2K so 4K
+	 * should give at least 1 PSB per sample.
+	 */
+	ptr->itr.default_aux_sample_size = 4096;
 	return &ptr->itr;
 }
Signature · 1 line
2.17.1
Signature · 1 line
- Arnaldo
Signature · 1 line
- Arnaldo
#28 lore raw

Re: [PATCH 13/15] perf intel-pt: Add support for recording AUX area samples

Em Thu, Nov 21, 2019 at 11:31:29AM -0300, Arnaldo Carvalho de Melo escreveu:

Quoted 67 lines

Em Thu, Nov 21, 2019 at 11:28:43AM -0300, Arnaldo Carvalho de Melo escreveu:

Quoted 61 lines

Em Fri, Nov 15, 2019 at 02:42:23PM +0200, Adrian Hunter escreveu:

Quoted 41 lines

Set up the default number of mmap pages, default sample size and default psb_period for AUX area sampling. Add documentation also.

---
 tools/perf/Documentation/intel-pt.txt | 59 ++++++++++++++++++-
 tools/perf/arch/x86/util/auxtrace.c   |  2 +
 tools/perf/arch/x86/util/intel-pt.c   | 81 ++++++++++++++++++++++++++-
 3 files changed, 139 insertions(+), 3 deletions(-)
tools/perf/Documentation/intel-pt.txt +23 -0
index e0d9e7dd4f17..2cf2d9e9d0da 100644
@@ -434,6 +434,56 @@ pwr_evt		Enable power events.  The power events provide information about
 		"0" otherwise.
 
 
+AUX area sampling option
+------------------------
+
+To select Intel PT "sampling" the AUX area sampling option can be used:
+
+	--aux-sample
+
+Optionally it can be followed by the sample size in bytes e.g.
+
+	--aux-sample=8192
+
+In addition, the Intel PT event to sample must be defined e.g.
+
+	-e intel_pt//u
+
+Samples on other events will be created containing Intel PT data e.g. the
+following will create Intel PT samples on the branch-misses event, note the
+events must be grouped using {}:
+
+	perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
+
+An alternative to '--aux-sample' is to add the config term 'aux-sample-size' to
+events.  In this case, the grouping is implied e.g.

tools/perf/Documentation/intel-pt.txt pwr_evt Enable power events. The power events provide information about · line 469

Quoted 10 lines
tools/perf/Documentation/intel-pt.txt +10 -0
+
+	perf record -e intel_pt//u -e branch-misses/aux-sample-size=8192/u
+
+is the same as:
+
+	perf record -e '{intel_pt//u,branch-misses/aux-sample-size=8192/u}'
+
+but allows for also using an address filter e.g.:
+
+	perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls

Can we improve this warning?

[root@quaco ~]# perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls Error:
The sys_perf_event_open() syscall returned with 7 (Argument list too long) for event (branch-misses/aux-sample-size=8192/u). /bin/dmesg | grep -i perf may provide additional information.

Quoted 4 lines

[root@quaco ~]#
[root@quaco ~]# uname -a
Linux quaco 5.4.0-rc8 #1 SMP Mon Nov 18 06:15:31 -03 2019 x86_64 x86_64 x86_64 GNU/Linux [root@quaco ~]#

Quoted 8 lines

Ditto for this other example:

[root@quaco ~]# perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
Error:
The sys_perf_event_open() syscall returned with 7 (Argument list too long) for event (branch-misses:u). /bin/dmesg | grep -i perf may provide additional information.

[root@quaco ~]#

I mean on follow up patches, I'm applying this series now as-is.

Quoted 205 lines
Quoted 201 lines
Quoted 197 lines
tools/perf/Documentation/intel-pt.txt +24 -2
+
+It is important to select a sample size that is big enough to contain at least
+one PSB packet.  If not a warning will be displayed:
+
+	Intel PT sample size (%zu) may be too small for PSB period (%zu)
+
+The calculation used for that is: if sample_size <= psb_period + 256 display the
+warning.  When sampling is used, psb_period defaults to 0 (2KiB).
+
+The default sample size is 4KiB.
+
+The sample size is passed in aux_sample_size in struct perf_event_attr.  The
+sample size is limited by the maximum event size which is 64KiB.  It is
+difficult to know how big the event might be without the trace sample attached,
+but the tool validates that the sample size is not greater than 60KiB.
+
+
 new snapshot option
 -------------------
 
@@ -487,8 +537,8 @@ their mlock limit (which defaults to 64KiB but is not multiplied by the number
 of cpus).
 
 In full-trace mode, powers of two are allowed for buffer size, with a minimum
-size of 2 pages.  In snapshot mode, it is the same but the minimum size is
-1 page.
+size of 2 pages.  In snapshot mode or sampling mode, it is the same but the
+minimum size is 1 page.
 
 The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g.
 
@@ -501,12 +551,17 @@ Intel PT modes of operation
 
 Intel PT can be used in 2 modes:
 	full-trace mode
+	sample mode
 	snapshot mode
 
 Full-trace mode traces continuously e.g.
 
 	perf record -e intel_pt//u uname
 
+Sample mode attaches a Intel PT sample to other events e.g.
+
+	perf record --aux-sample -e intel_pt//u -e branch-misses:u
+
 Snapshot mode captures the available data when a signal is sent e.g.
 
 	perf record -v -e intel_pt//u -S ./loopy 1000000000 &
tools/perf/arch/x86/util/auxtrace.c +2 -0
index 96f4a2c11893..092543cad324 100644
@@ -26,6 +26,8 @@ struct auxtrace_record *auxtrace_record__init_intel(struct evlist *evlist,
 	bool found_bts = false;
 
 	intel_pt_pmu = perf_pmu__find(INTEL_PT_PMU_NAME);
+	if (intel_pt_pmu)
+		intel_pt_pmu->auxtrace = true;
 	intel_bts_pmu = perf_pmu__find(INTEL_BTS_PMU_NAME);
 
 	evlist__for_each_entry(evlist, evsel) {
tools/perf/arch/x86/util/intel-pt.c +80 -1
index d6d26256915f..20df442fdf36 100644
@@ -17,6 +17,7 @@
 #include "../../util/event.h"
 #include "../../util/evlist.h"
 #include "../../util/evsel.h"
+#include "../../util/evsel_config.h"
 #include "../../util/cpumap.h"
 #include "../../util/mmap.h"
 #include <subcmd/parse-options.h>
@@ -551,6 +552,43 @@ static int intel_pt_validate_config(struct perf_pmu *intel_pt_pmu,
 					evsel->core.attr.config);
 }
 
+static void intel_pt_config_sample_mode(struct perf_pmu *intel_pt_pmu,
+					struct evsel *evsel)
+{
+	struct perf_evsel_config_term *term;
+	u64 user_bits = 0, bits;
+
+	term = perf_evsel__get_config_term(evsel, CFG_CHG);
+	if (term)
+		user_bits = term->val.cfg_chg;
+
+	bits = perf_pmu__format_bits(&intel_pt_pmu->format, "psb_period");
+
+	/* Did user change psb_period */
+	if (bits & user_bits)
+		return;
+
+	/* Set psb_period to 0 */
+	evsel->core.attr.config &= ~bits;
+}
+
+static void intel_pt_min_max_sample_sz(struct evlist *evlist,
+				       size_t *min_sz, size_t *max_sz)
+{
+	struct evsel *evsel;
+
+	evlist__for_each_entry(evlist, evsel) {
+		size_t sz = evsel->core.attr.aux_sample_size;
+
+		if (!sz)
+			continue;
+		if (min_sz && (sz < *min_sz || !*min_sz))
+			*min_sz = sz;
+		if (max_sz && sz > *max_sz)
+			*max_sz = sz;
+	}
+}
+
 /*
  * Currently, there is not enough information to disambiguate different PEBS
  * events, so only allow one.
@@ -606,6 +644,11 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 		return -EINVAL;
 	}
 
+	if (opts->auxtrace_snapshot_mode && opts->auxtrace_sample_mode) {
+		pr_err("Snapshot mode (" INTEL_PT_PMU_NAME " PMU) and sample trace cannot be used together\n");
+		return -EINVAL;
+	}
+
 	if (opts->use_clockid) {
 		pr_err("Cannot use clockid (-k option) with " INTEL_PT_PMU_NAME "\n");
 		return -EINVAL;
@@ -617,6 +660,9 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 	if (!opts->full_auxtrace)
 		return 0;
 
+	if (opts->auxtrace_sample_mode)
+		intel_pt_config_sample_mode(intel_pt_pmu, intel_pt_evsel);
+
 	err = intel_pt_validate_config(intel_pt_pmu, intel_pt_evsel);
 	if (err)
 		return err;
@@ -666,6 +712,34 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 				    opts->auxtrace_snapshot_size, psb_period);
 	}
 
+	/* Set default sizes for sample mode */
+	if (opts->auxtrace_sample_mode) {
+		size_t psb_period = intel_pt_psb_period(intel_pt_pmu, evlist);
+		size_t min_sz = 0, max_sz = 0;
+
+		intel_pt_min_max_sample_sz(evlist, &min_sz, &max_sz);
+		if (!opts->auxtrace_mmap_pages && !privileged &&
+		    opts->mmap_pages == UINT_MAX)
+			opts->mmap_pages = KiB(256) / page_size;
+		if (!opts->auxtrace_mmap_pages) {
+			size_t sz = round_up(max_sz, page_size) / page_size;
+
+			opts->auxtrace_mmap_pages = roundup_pow_of_two(sz);
+		}
+		if (max_sz > opts->auxtrace_mmap_pages * (size_t)page_size) {
+			pr_err("Sample size %zu must not be greater than AUX area tracing mmap size %zu\n",
+			       max_sz,
+			       opts->auxtrace_mmap_pages * (size_t)page_size);
+			return -EINVAL;
+		}
+		pr_debug2("Intel PT min. sample size: %zu max. sample size: %zu\n",
+			  min_sz, max_sz);
+		if (psb_period &&
+		    min_sz <= psb_period + INTEL_PT_PSB_PERIOD_NEAR)
+			ui__warning("Intel PT sample size (%zu) may be too small for PSB period (%zu)\n",
+				    min_sz, psb_period);
+	}
+
 	/* Set default sizes for full trace mode */
 	if (opts->full_auxtrace && !opts->auxtrace_mmap_pages) {
 		if (privileged) {
@@ -682,7 +756,7 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,
 		size_t sz = opts->auxtrace_mmap_pages * (size_t)page_size;
 		size_t min_sz;
 
-		if (opts->auxtrace_snapshot_mode)
+		if (opts->auxtrace_snapshot_mode || opts->auxtrace_sample_mode)
 			min_sz = KiB(4);
 		else
 			min_sz = KiB(8);
@@ -1136,5 +1210,10 @@ struct auxtrace_record *intel_pt_recording_init(int *err)
 	ptr->itr.parse_snapshot_options = intel_pt_parse_snapshot_options;
 	ptr->itr.reference = intel_pt_reference;
 	ptr->itr.read_finish = intel_pt_read_finish;
+	/*
+	 * Decoding starts at a PSB packet. Minimum PSB period is 2K so 4K
+	 * should give at least 1 PSB per sample.
+	 */
+	ptr->itr.default_aux_sample_size = 4096;
 	return &ptr->itr;
 }
Signature · 1 line
2.17.1
Signature · 1 line
- Arnaldo
Signature · 1 line
- Arnaldo
Signature · 1 line
- Arnaldo
merge bot Applied
#29 lore raw

[tip: perf/core] perf intel-pt: Add support for recording AUX area samples

In reply to Adrian Hunter
The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     c4ab2f0f763da64d88cec6f20fd664f2347eca60
Gitweb:        https://git.kernel.org/tip/c4ab2f0f763da64d88cec6f20fd664f2347eca60
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:23 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf intel-pt: Add support for recording AUX area samples

Set up the default number of mmap pages, default sample size and default psb_period for AUX area sampling. Add documentation also.

---
 tools/perf/Documentation/intel-pt.txt | 59 ++++++++++++++++++-
 tools/perf/arch/x86/util/auxtrace.c   |  2 +-
 tools/perf/arch/x86/util/intel-pt.c   | 81 +++++++++++++++++++++++++-
 3 files changed, 139 insertions(+), 3 deletions(-)
tools/perf/Documentation/intel-pt.txt +57 -2
index e0d9e7d..2cf2d9e 100644
@@ -434,6 +434,56 @@ pwr_evt		Enable power events.  The power events provide information about
 		"0" otherwise.
 
 
+AUX area sampling option
+------------------------
+
+To select Intel PT "sampling" the AUX area sampling option can be used:
+
+	--aux-sample
+
+Optionally it can be followed by the sample size in bytes e.g.
+
+	--aux-sample=8192
+
+In addition, the Intel PT event to sample must be defined e.g.
+
+	-e intel_pt//u
+
+Samples on other events will be created containing Intel PT data e.g. the
+following will create Intel PT samples on the branch-misses event, note the
+events must be grouped using {}:
+
+	perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
+
+An alternative to '--aux-sample' is to add the config term 'aux-sample-size' to
+events.  In this case, the grouping is implied e.g.
+
+	perf record -e intel_pt//u -e branch-misses/aux-sample-size=8192/u
+
+is the same as:
+
+	perf record -e '{intel_pt//u,branch-misses/aux-sample-size=8192/u}'
+
+but allows for also using an address filter e.g.:
+
+	perf record -e intel_pt//u --filter 'filter * @/bin/ls' -e branch-misses/aux-sample-size=8192/u -- ls
+
+It is important to select a sample size that is big enough to contain at least
+one PSB packet.  If not a warning will be displayed:
+
+	Intel PT sample size (%zu) may be too small for PSB period (%zu)
+
+The calculation used for that is: if sample_size <= psb_period + 256 display the
+warning.  When sampling is used, psb_period defaults to 0 (2KiB).
+
+The default sample size is 4KiB.
+
+The sample size is passed in aux_sample_size in struct perf_event_attr.  The
+sample size is limited by the maximum event size which is 64KiB.  It is
+difficult to know how big the event might be without the trace sample attached,
+but the tool validates that the sample size is not greater than 60KiB.
+
+
 new snapshot option
 -------------------
 
@@ -487,8 +537,8 @@ their mlock limit (which defaults to 64KiB but is not multiplied by the number
 of cpus).
 
 In full-trace mode, powers of two are allowed for buffer size, with a minimum
-size of 2 pages.  In snapshot mode, it is the same but the minimum size is
-1 page.
+size of 2 pages.  In snapshot mode or sampling mode, it is the same but the
+minimum size is 1 page.
 
 The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g.
 
@@ -501,12 +551,17 @@ Intel PT modes of operation
 
 Intel PT can be used in 2 modes:
 	full-trace mode
+	sample mode
 	snapshot mode
 
 Full-trace mode traces continuously e.g.
 
 	perf record -e intel_pt//u uname
 
+Sample mode attaches a Intel PT sample to other events e.g.
+
+	perf record --aux-sample -e intel_pt//u -e branch-misses:u
+
 Snapshot mode captures the available data when a signal is sent e.g.
 
 	perf record -v -e intel_pt//u -S ./loopy 1000000000 &
tools/perf/arch/x86/util/auxtrace.c +2 -0
index 96f4a2c..092543c 100644
@@ -26,6 +26,8 @@ struct auxtrace_record *auxtrace_record__init_intel(struct evlist *evlist,
 	bool found_bts = false;
 
 	intel_pt_pmu = perf_pmu__find(INTEL_PT_PMU_NAME);
+	if (intel_pt_pmu)
+		intel_pt_pmu->auxtrace = true;
 	intel_bts_pmu = perf_pmu__find(INTEL_BTS_PMU_NAME);
 
 	evlist__for_each_entry(evlist, evsel) {
tools/perf/arch/x86/util/intel-pt.c +80 -1

122 lines not on this page · raw message

author reviewer
#30 lore raw

PATCH 14/15 perf intel-pt: Add support for decoding AUX area samples

In reply to Adrian Hunter

Add support for dumping, queuing and decoding AUX area samples. Decoding samples is the same as regular decoding, except in the case where there are no timestamps, in which case buffers are decoded immediately before the sample event.

---
 tools/perf/util/intel-pt.c | 109 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 106 insertions(+), 3 deletions(-)
tools/perf/util/intel-pt.c +106 -3
index a1c9eb6d4f40..409afc611be9 100644
@@ -233,6 +233,16 @@ static void intel_pt_log_event(union perf_event *event)
 	perf_event__fprintf(event, f);
 }
 
+static void intel_pt_dump_sample(struct perf_session *session,
+				 struct perf_sample *sample)
+{
+	struct intel_pt *pt = container_of(session->auxtrace, struct intel_pt,
+					   auxtrace);
+
+	printf("\n");
+	intel_pt_dump(pt, sample->aux_sample.data, sample->aux_sample.size);
+}
+
 static int intel_pt_do_fix_overlap(struct intel_pt *pt, struct auxtrace_buffer *a,
 				   struct auxtrace_buffer *b)
 {
@@ -836,6 +846,18 @@ static bool intel_pt_have_tsc(struct intel_pt *pt)
 	return have_tsc;
 }
 
+static bool intel_pt_sampling_mode(struct intel_pt *pt)
+{
+	struct evsel *evsel;
+
+	evlist__for_each_entry(pt->session->evlist, evsel) {
+		if ((evsel->core.attr.sample_type & PERF_SAMPLE_AUX) &&
+		    evsel->core.attr.aux_sample_size)
+			return true;
+	}
+	return false;
+}
+
 static u64 intel_pt_ns_to_ticks(const struct intel_pt *pt, u64 ns)
 {
 	u64 quot, rem;
@@ -2320,6 +2342,56 @@ static int intel_pt_process_timeless_queues(struct intel_pt *pt, pid_t tid,
 	return 0;
 }
 
+static void intel_pt_sample_set_pid_tid_cpu(struct intel_pt_queue *ptq,
+					    struct auxtrace_queue *queue,
+					    struct perf_sample *sample)
+{
+	struct machine *m = ptq->pt->machine;
+
+	ptq->pid = sample->pid;
+	ptq->tid = sample->tid;
+	ptq->cpu = queue->cpu;
+
+	intel_pt_log("queue %u cpu %d pid %d tid %d\n",
+		     ptq->queue_nr, ptq->cpu, ptq->pid, ptq->tid);
+
+	thread__zput(ptq->thread);
+
+	if (ptq->tid == -1)
+		return;
+
+	if (ptq->pid == -1) {
+		ptq->thread = machine__find_thread(m, -1, ptq->tid);
+		if (ptq->thread)
+			ptq->pid = ptq->thread->pid_;
+		return;
+	}
+
+	ptq->thread = machine__findnew_thread(m, ptq->pid, ptq->tid);
+}
+
+static int intel_pt_process_timeless_sample(struct intel_pt *pt,
+					    struct perf_sample *sample)
+{
+	struct auxtrace_queue *queue;
+	struct intel_pt_queue *ptq;
+	u64 ts = 0;
+
+	queue = auxtrace_queues__sample_queue(&pt->queues, sample, pt->session);
+	if (!queue)
+		return -EINVAL;
+
+	ptq = queue->priv;
+	if (!ptq)
+		return 0;
+
+	ptq->stop = false;
+	ptq->time = sample->time;
+	intel_pt_sample_set_pid_tid_cpu(ptq, queue, sample);
+	intel_pt_run_decoder(ptq, &ts);
+	return 0;
+}
+
 static int intel_pt_lost(struct intel_pt *pt, struct perf_sample *sample)
 {
 	return intel_pt_synth_error(pt, INTEL_PT_ERR_LOST, sample->cpu,
@@ -2550,7 +2622,11 @@ static int intel_pt_process_event(struct perf_session *session,
 	}
 
 	if (pt->timeless_decoding) {
-		if (event->header.type == PERF_RECORD_EXIT) {
+		if (pt->sampling_mode) {
+			if (sample->aux_sample.size)
+				err = intel_pt_process_timeless_sample(pt,
+								       sample);
+		} else if (event->header.type == PERF_RECORD_EXIT) {
 			err = intel_pt_process_timeless_queues(pt,
 							       event->fork.tid,
 							       sample->time);
@@ -2676,6 +2752,28 @@ static int intel_pt_process_auxtrace_event(struct perf_session *session,
 	return 0;
 }
 
+static int intel_pt_queue_data(struct perf_session *session,
+			       struct perf_sample *sample,
+			       union perf_event *event, u64 data_offset)
+{
+	struct intel_pt *pt = container_of(session->auxtrace, struct intel_pt,
+					   auxtrace);
+	u64 timestamp;
+
+	if (event) {
+		return auxtrace_queues__add_event(&pt->queues, session, event,
+						  data_offset, NULL);
+	}
+
+	if (sample->time && sample->time != (u64)-1)
+		timestamp = perf_time_to_tsc(sample->time, &pt->tc);
+	else
+		timestamp = 0;
+
+	return auxtrace_queues__add_sample(&pt->queues, session, sample,
+					   data_offset, timestamp);
+}
+
 struct intel_pt_synth {
 	struct perf_tool dummy_tool;
 	struct perf_session *session;
@@ -3178,7 +3276,7 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 	if (pt->timeless_decoding && !pt->tc.time_mult)
 		pt->tc.time_mult = 1;
 	pt->have_tsc = intel_pt_have_tsc(pt);
-	pt->sampling_mode = false;
+	pt->sampling_mode = intel_pt_sampling_mode(pt);
 	pt->est_tsc = !pt->timeless_decoding;
 
 	pt->unknown_thread = thread__new(999999999, 999999999);
@@ -3205,6 +3303,8 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 
 	pt->auxtrace.process_event = intel_pt_process_event;
 	pt->auxtrace.process_auxtrace_event = intel_pt_process_auxtrace_event;
+	pt->auxtrace.queue_data = intel_pt_queue_data;
+	pt->auxtrace.dump_auxtrace_sample = intel_pt_dump_sample;
 	pt->auxtrace.flush_events = intel_pt_flush;
 	pt->auxtrace.free_events = intel_pt_free_events;
 	pt->auxtrace.free = intel_pt_free;
@@ -3282,7 +3382,10 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 
 	intel_pt_setup_pebs_events(pt);
 
-	err = auxtrace_queues__process_index(&pt->queues, session);
+	if (pt->sampling_mode || list_empty(&session->auxtrace_index))
+		err = auxtrace_queue_data(session, true, true);
+	else
+		err = auxtrace_queues__process_index(&pt->queues, session);
 	if (err)
 		goto err_delete_thread;
 
Signature · 1 line
2.17.1
merge bot Applied
#31 lore raw

[tip: perf/core] perf intel-pt: Add support for decoding AUX area samples

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     dbd134322e74f19dbabf174b2cbf7fca9bbc34d3
Gitweb:        https://git.kernel.org/tip/dbd134322e74f19dbabf174b2cbf7fca9bbc34d3
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:24 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf intel-pt: Add support for decoding AUX area samples

Add support for dumping, queuing and decoding AUX area samples. Decoding samples is the same as regular decoding, except in the case where there are no timestamps, in which case buffers are decoded immediately before the sample event.

---
 tools/perf/util/intel-pt.c | 109 +++++++++++++++++++++++++++++++++++-
 1 file changed, 106 insertions(+), 3 deletions(-)
tools/perf/util/intel-pt.c +106 -3
index a1c9eb6..409afc6 100644
@@ -233,6 +233,16 @@ static void intel_pt_log_event(union perf_event *event)
 	perf_event__fprintf(event, f);
 }
 
+static void intel_pt_dump_sample(struct perf_session *session,
+				 struct perf_sample *sample)
+{
+	struct intel_pt *pt = container_of(session->auxtrace, struct intel_pt,
+					   auxtrace);
+
+	printf("\n");
+	intel_pt_dump(pt, sample->aux_sample.data, sample->aux_sample.size);
+}
+
 static int intel_pt_do_fix_overlap(struct intel_pt *pt, struct auxtrace_buffer *a,
 				   struct auxtrace_buffer *b)
 {
@@ -836,6 +846,18 @@ static bool intel_pt_have_tsc(struct intel_pt *pt)
 	return have_tsc;
 }
 
+static bool intel_pt_sampling_mode(struct intel_pt *pt)
+{
+	struct evsel *evsel;
+
+	evlist__for_each_entry(pt->session->evlist, evsel) {
+		if ((evsel->core.attr.sample_type & PERF_SAMPLE_AUX) &&
+		    evsel->core.attr.aux_sample_size)
+			return true;
+	}
+	return false;
+}
+
 static u64 intel_pt_ns_to_ticks(const struct intel_pt *pt, u64 ns)
 {
 	u64 quot, rem;
@@ -2320,6 +2342,56 @@ static int intel_pt_process_timeless_queues(struct intel_pt *pt, pid_t tid,
 	return 0;
 }
 
+static void intel_pt_sample_set_pid_tid_cpu(struct intel_pt_queue *ptq,
+					    struct auxtrace_queue *queue,
+					    struct perf_sample *sample)
+{
+	struct machine *m = ptq->pt->machine;
+
+	ptq->pid = sample->pid;
+	ptq->tid = sample->tid;
+	ptq->cpu = queue->cpu;
+
+	intel_pt_log("queue %u cpu %d pid %d tid %d\n",
+		     ptq->queue_nr, ptq->cpu, ptq->pid, ptq->tid);
+
+	thread__zput(ptq->thread);
+
+	if (ptq->tid == -1)
+		return;
+
+	if (ptq->pid == -1) {
+		ptq->thread = machine__find_thread(m, -1, ptq->tid);
+		if (ptq->thread)
+			ptq->pid = ptq->thread->pid_;
+		return;
+	}
+
+	ptq->thread = machine__findnew_thread(m, ptq->pid, ptq->tid);
+}
+
+static int intel_pt_process_timeless_sample(struct intel_pt *pt,
+					    struct perf_sample *sample)
+{
+	struct auxtrace_queue *queue;
+	struct intel_pt_queue *ptq;
+	u64 ts = 0;
+
+	queue = auxtrace_queues__sample_queue(&pt->queues, sample, pt->session);
+	if (!queue)
+		return -EINVAL;
+
+	ptq = queue->priv;
+	if (!ptq)
+		return 0;
+
+	ptq->stop = false;
+	ptq->time = sample->time;
+	intel_pt_sample_set_pid_tid_cpu(ptq, queue, sample);
+	intel_pt_run_decoder(ptq, &ts);
+	return 0;
+}
+
 static int intel_pt_lost(struct intel_pt *pt, struct perf_sample *sample)
 {
 	return intel_pt_synth_error(pt, INTEL_PT_ERR_LOST, sample->cpu,
@@ -2550,7 +2622,11 @@ static int intel_pt_process_event(struct perf_session *session,
 	}
 
 	if (pt->timeless_decoding) {
-		if (event->header.type == PERF_RECORD_EXIT) {
+		if (pt->sampling_mode) {
+			if (sample->aux_sample.size)
+				err = intel_pt_process_timeless_sample(pt,
+								       sample);
+		} else if (event->header.type == PERF_RECORD_EXIT) {
 			err = intel_pt_process_timeless_queues(pt,
 							       event->fork.tid,
 							       sample->time);
@@ -2676,6 +2752,28 @@ static int intel_pt_process_auxtrace_event(struct perf_session *session,
 	return 0;
 }
 
+static int intel_pt_queue_data(struct perf_session *session,
+			       struct perf_sample *sample,
+			       union perf_event *event, u64 data_offset)
+{
+	struct intel_pt *pt = container_of(session->auxtrace, struct intel_pt,
+					   auxtrace);
+	u64 timestamp;
+
+	if (event) {
+		return auxtrace_queues__add_event(&pt->queues, session, event,
+						  data_offset, NULL);
+	}
+
+	if (sample->time && sample->time != (u64)-1)
+		timestamp = perf_time_to_tsc(sample->time, &pt->tc);
+	else
+		timestamp = 0;
+
+	return auxtrace_queues__add_sample(&pt->queues, session, sample,
+					   data_offset, timestamp);
+}
+
 struct intel_pt_synth {
 	struct perf_tool dummy_tool;
 	struct perf_session *session;
@@ -3178,7 +3276,7 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 	if (pt->timeless_decoding && !pt->tc.time_mult)
 		pt->tc.time_mult = 1;
 	pt->have_tsc = intel_pt_have_tsc(pt);
-	pt->sampling_mode = false;
+	pt->sampling_mode = intel_pt_sampling_mode(pt);
 	pt->est_tsc = !pt->timeless_decoding;
 
 	pt->unknown_thread = thread__new(999999999, 999999999);
@@ -3205,6 +3303,8 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 
 	pt->auxtrace.process_event = intel_pt_process_event;
 	pt->auxtrace.process_auxtrace_event = intel_pt_process_auxtrace_event;
+	pt->auxtrace.queue_data = intel_pt_queue_data;
+	pt->auxtrace.dump_auxtrace_sample = intel_pt_dump_sample;
 	pt->auxtrace.flush_events = intel_pt_flush;
 	pt->auxtrace.free_events = intel_pt_free_events;
 	pt->auxtrace.free = intel_pt_free;
@@ -3282,7 +3382,10 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
 
 	intel_pt_setup_pebs_events(pt);
 
-	err = auxtrace_queues__process_index(&pt->queues, session);
+	if (pt->sampling_mode || list_empty(&session->auxtrace_index))
+		err = auxtrace_queue_data(session, true, true);
+	else
+		err = auxtrace_queues__process_index(&pt->queues, session);
 	if (err)
 		goto err_delete_thread;
 
author reviewer
#32 lore raw

PATCH 15/15 perf intel-bts: Does not support AUX area sampling

In reply to Adrian Hunter

Add an error message because Intel BTS does not support AUX area sampling.

---
 tools/perf/arch/x86/util/auxtrace.c  | 2 ++
 tools/perf/arch/x86/util/intel-bts.c | 5 +++++
 2 files changed, 7 insertions(+)
tools/perf/arch/x86/util/auxtrace.c +2 -0
index 092543cad324..7abc9fd4cbec 100644
@@ -29,6 +29,8 @@ struct auxtrace_record *auxtrace_record__init_intel(struct evlist *evlist,
 	if (intel_pt_pmu)
 		intel_pt_pmu->auxtrace = true;
 	intel_bts_pmu = perf_pmu__find(INTEL_BTS_PMU_NAME);
+	if (intel_bts_pmu)
+		intel_bts_pmu->auxtrace = true;
 
 	evlist__for_each_entry(evlist, evsel) {
 		if (intel_pt_pmu && evsel->core.attr.type == intel_pt_pmu->type)
tools/perf/arch/x86/util/intel-bts.c +5 -0
index f7f68a50a5cd..27d9e214d068 100644
@@ -113,6 +113,11 @@ static int intel_bts_recording_options(struct auxtrace_record *itr,
 	const struct perf_cpu_map *cpus = evlist->core.cpus;
 	bool privileged = perf_event_paranoid_check(-1);
 
+	if (opts->auxtrace_sample_mode) {
+		pr_err("Intel BTS does not support AUX area sampling\n");
+		return -EINVAL;
+	}
+
 	btsr->evlist = evlist;
 	btsr->snapshot_mode = opts->auxtrace_snapshot_mode;
 
Signature · 1 line
2.17.1
merge bot Applied
#33 lore raw

[tip: perf/core] perf intel-bts: Does not support AUX area sampling

The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     32a1ece4bdbde24734ab16484bad7316f03fc42d
Gitweb:        https://git.kernel.org/tip/32a1ece4bdbde24734ab16484bad7316f03fc42d
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 14:42:25 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Fri, 22 Nov 2019 10:48:13 -03:00

perf intel-bts: Does not support AUX area sampling

Add an error message because Intel BTS does not support AUX area sampling.

---
 tools/perf/arch/x86/util/auxtrace.c  | 2 ++
 tools/perf/arch/x86/util/intel-bts.c | 5 +++++
 2 files changed, 7 insertions(+)
tools/perf/arch/x86/util/auxtrace.c +2 -0
index 092543c..7abc9fd 100644
@@ -29,6 +29,8 @@ struct auxtrace_record *auxtrace_record__init_intel(struct evlist *evlist,
 	if (intel_pt_pmu)
 		intel_pt_pmu->auxtrace = true;
 	intel_bts_pmu = perf_pmu__find(INTEL_BTS_PMU_NAME);
+	if (intel_bts_pmu)
+		intel_bts_pmu->auxtrace = true;
 
 	evlist__for_each_entry(evlist, evsel) {
 		if (intel_pt_pmu && evsel->core.attr.type == intel_pt_pmu->type)
tools/perf/arch/x86/util/intel-bts.c +5 -0
index f7f68a5..27d9e21 100644
@@ -113,6 +113,11 @@ static int intel_bts_recording_options(struct auxtrace_record *itr,
 	const struct perf_cpu_map *cpus = evlist->core.cpus;
 	bool privileged = perf_event_paranoid_check(-1);
 
+	if (opts->auxtrace_sample_mode) {
+		pr_err("Intel BTS does not support AUX area sampling\n");
+		return -EINVAL;
+	}
+
 	btsr->evlist = evlist;
 	btsr->snapshot_mode = opts->auxtrace_snapshot_mode;
 
author reviewer
#34 lore raw
In reply to Adrian Hunter
Quoted 4 lines · Adrian Hunter

Hi

The kernel changes for AUX area sampling are now in tip, so here are the tools' patches.

Here is a branch containing the patches:

git://git.infradead.org/users/ahunter/linux-perf.git pt-sampling