Skip to contentSkip to conversation

Add iWave RZ/G1N support

PATCH New Biju Das 2 participants 23 messages Nov 14, 2019 – Nov 15, 2019 4 messages not in the archive

Subsystems (11)
lore
Share & tools
lore

Biju Das

author
#0 lore raw

cover Add iWave RZ/G1N support

This patch series add support for iWave G20D-Q7 board based on RZ/G1N.

This patch series is based on linux-4.4.y-cip and all the patches in this series are cherry-picked from linux rc tree.

Biju Das (20):
dt-bindings: reset: rcar-rst: Document r8a7744 reset module
soc: renesas: rcar-rst: Add support for RZ/G1N
ARM: shmobile: r8a7744: Add clock index macros for DT sources
clk: shmobile: Compile clk-rcar-gen2.c when using the r8a7744
ARM: shmobile: r8a7744: Basic SoC support
clk: shmobile: Document r8a7744 CPG clock support
clk: shmobile: Document r8a7744 MSTP clock support
clk: shmobile: Document r8a7744 CPG DIV6 clock support
ARM: multi_v7_defconfig: Enable r8a7744 SoC
ARM: shmobile: defconfig: Enable r8a7744 SoC
ARM: debug-ll: Add support for r8a7744
dt-bindings: pinctrl: sh-pfc: Document r8a7744 PFC support
pinctrl: sh-pfc: r8a7791: Add r8a7744 support
ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi
dt-bindings: serial: sh-sci: Document r8a7744 bindings
ARM: dts: r8a7744: Initial SoC device tree
dt-bindings: arm: renesas: Document iWave RZ/G1N SOM
dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
ARM: dts: r8a7744-iwg20m: Add iWave RZ/G1N Qseven SOM
ARM: dts: r8a7744-iwg20d-q7: Add support for iWave G20D-Q7 board based
on RZ/G1N

Geert Uytterhoeven (1):
ARM: shmobile: Document RZ/G1N SoC DT binding

 Documentation/devicetree/bindings/arm/shmobile.txt |   6 +
 .../bindings/clock/renesas,cpg-div6-clocks.txt     |   1 +
 .../bindings/clock/renesas,cpg-mstp-clocks.txt     |   1 +
 .../clock/renesas,rcar-gen2-cpg-clocks.txt         |   1 +
 .../bindings/pinctrl/renesas,pfc-pinctrl.txt       |   1 +
 .../devicetree/bindings/reset/renesas,rst.txt      |   1 +
 .../bindings/serial/renesas,sci-serial.txt         |   4 +
 arch/arm/Kconfig.debug                             |   7 +-
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/iwg20d-q7-common.dtsi            |   4 -
 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts    |   4 +
 arch/arm/boot/dts/r8a7743-iwg20d-q7.dts            |   4 +
 arch/arm/boot/dts/r8a7744-iwg20d-q7.dts            |  15 +
 arch/arm/boot/dts/r8a7744-iwg20m.dtsi              |  31 +
 arch/arm/boot/dts/r8a7744.dtsi                     | 778 +++++++++++++++++++++
 arch/arm/configs/multi_v7_defconfig                |   1 +
 arch/arm/configs/shmobile_defconfig                |   1 +
 arch/arm/mach-shmobile/Kconfig                     |   5 +
 arch/arm/mach-shmobile/pm-rcar-gen2.c              |   2 +
 arch/arm/mach-shmobile/setup-rcar-gen2.c           |   1 +
 drivers/clk/shmobile/Makefile                      |   1 +
 drivers/pinctrl/sh-pfc/Kconfig                     |   5 +
 drivers/pinctrl/sh-pfc/Makefile                    |   1 +
 drivers/pinctrl/sh-pfc/core.c                      |   6 +
 drivers/pinctrl/sh-pfc/core.h                      |   1 +
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c               |  21 +
 drivers/soc/renesas/rcar-rst.c                     |   1 +
 include/dt-bindings/clock/r8a7744-clock.h          | 166 +++++
 28 files changed, 1064 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
 create mode 100644 arch/arm/boot/dts/r8a7744-iwg20m.dtsi
 create mode 100644 arch/arm/boot/dts/r8a7744.dtsi
 create mode 100644 include/dt-bindings/clock/r8a7744-clock.h
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 1/21 ARM: shmobile: Document RZ/G1N SoC DT binding

From: Geert Uytterhoeven <[email protected]>

commit cfb9f93437eb6663ca99e85c47bb3656ccfe59c5 upstream.

Document the RZ/G1N (r8a7744) SoC.

---
 Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/shmobile.txt +2 -0
index 423575a..52ee47b 100644
@@ -15,6 +15,8 @@ SoCs:
     compatible = "renesas,r8a7740"
   - RZ/G1M (R8A77430)
     compatible = "renesas,r8a7743"
+  - RZ/G1N (R8A77440)
+    compatible = "renesas,r8a7744"
   - RZ/G1E (R8A77450)
     compatible = "renesas,r8a7745"
   - RZ/G1C (R8A77470)
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH 2/21 dt-bindings: reset: rcar-rst: Document r8a7744 reset module

In reply to Biju Das

commit f1ae799039bfd3fcc046041714eb0ac227505d0f upstream.

Document bindings for the RZ/G1N (R8A7744) reset module.

---
 Documentation/devicetree/bindings/reset/renesas,rst.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/reset/renesas,rst.txt +1 -0
index fb5f68e..270f54b 100644
@@ -7,6 +7,7 @@ Required properties:
 		  - "renesas,<soctype>-rst" for R-Car Gen2 and RZ/G
 		Examples with soctypes are:
 		  - "renesas,r8a7743-rst" (RZ/G1M)
+		  - "renesas,r8a7744-rst" (RZ/G1N)
 		  - "renesas,r8a7745-rst" (RZ/G1E)
 		  - "renesas,r8a77470-rst" (RZ/G1C)
 		  - "renesas,r8a7790-rst" (R-Car H2)
Signature · 1 line
2.7.4
author
#3 lore raw

PATCH 3/21 soc: renesas: rcar-rst: Add support for RZ/G1N

In reply to Biju Das

commit 547276c6799913898550a9c4806310d590a3cb9e upstream.

---
 drivers/soc/renesas/rcar-rst.c | 1 +
 1 file changed, 1 insertion(+)
drivers/soc/renesas/rcar-rst.c +1 -0
index caaa029..8eaf736 100644
@@ -33,6 +33,7 @@ static const struct rst_config rcar_rst_gen2 __initconst = {
 static const struct of_device_id rcar_rst_matches[] __initconst = {
 	/* RZ/G is handled like R-Car Gen2 */
 	{ .compatible = "renesas,r8a7743-rst", .data = &rcar_rst_gen2 },
+	{ .compatible = "renesas,r8a7744-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7745-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a77470-rst", .data = &rcar_rst_gen2 },
 	/* R-Car Gen2 */
Signature · 1 line
2.7.4
author
#4 lore raw

PATCH 4/21 ARM: shmobile: r8a7744: Add clock index macros for DT sources

In reply to Biju Das

Add macros usable by device tree sources to reference r8a7744 clocks by index.

Unfortunately there is nothing that we can backport from mainline for this, as the architecture of the clock driver has changed quite dramatically over time.

---
 include/dt-bindings/clock/r8a7744-clock.h | 166 ++++++++++++++++++++++++++++++
 1 file changed, 166 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7744-clock.h
include/dt-bindings/clock/r8a7744-clock.h new file +166 -0
new file mode 100644
index 0000000..c83499c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7744_H__
+#define __DT_BINDINGS_CLOCK_R8A7744_H__
+
+/* CPG */
+#define R8A7744_CLK_MAIN		0
+#define R8A7744_CLK_PLL0		1
+#define R8A7744_CLK_PLL1		2
+#define R8A7744_CLK_PLL3		3
+#define R8A7744_CLK_LB			4
+#define R8A7744_CLK_QSPI		5
+#define R8A7744_CLK_SDH			6
+#define R8A7744_CLK_SD0			7
+#define R8A7744_CLK_Z			8
+#define R8A7744_CLK_RCAN		9
+
+/* MSTP0 */
+#define R8A7744_CLK_MSIOF0		0
+
+/* MSTP1 */
+#define R8A7744_CLK_VCP0		1
+#define R8A7744_CLK_VPC0		3
+#define R8A7744_CLK_ADG			6
+#define R8A7744_CLK_TSIF0		8
+#define R8A7744_CLK_TMU1		11
+#define R8A7744_CLK_3DG			12
+#define R8A7744_CLK_2DDMAC		15
+#define R8A7744_CLK_FDP1_1		18
+#define R8A7744_CLK_FDP1_0		19
+#define R8A7744_CLK_TMU3		21
+#define R8A7744_CLK_TMU2		22
+#define R8A7744_CLK_CMT0		24
+#define R8A7744_CLK_TMU0		25
+#define R8A7744_CLK_VSP1_DU1		27
+#define R8A7744_CLK_VSP1_DU0		28
+#define R8A7744_CLK_VSP1_S		31
+
+/* MSTP2 */
+#define R8A7744_CLK_SCIFA2		2
+#define R8A7744_CLK_SCIFA1		3
+#define R8A7744_CLK_SCIFA0		4
+#define R8A7744_CLK_MSIOF2		5
+#define R8A7744_CLK_SCIFB0		6
+#define R8A7744_CLK_SCIFB1		7
+#define R8A7744_CLK_MSIOF1		8
+#define R8A7744_CLK_SCIFB2		16
+#define R8A7744_CLK_SYS_DMAC1		18
+#define R8A7744_CLK_SYS_DMAC0		19
+
+/* MSTP3 */
+#define R8A7744_CLK_TPU0		4
+#define R8A7744_CLK_SDHI2		11
+#define R8A7744_CLK_SDHI1		12
+#define R8A7744_CLK_SDHI0		14
+#define R8A7744_CLK_MMCIF0		15
+#define R8A7744_CLK_IIC0		18
+#define R8A7744_CLK_PCIEC		19
+#define R8A7744_CLK_IIC1		23
+#define R8A7744_CLK_SSUSB		28
+#define R8A7744_CLK_CMT1		29
+#define R8A7744_CLK_USBDMAC0		30
+#define R8A7744_CLK_USBDMAC1		31
+
+/* MSTP4 */
+#define R8A7744_CLK_RWDT		2
+#define R8A7744_CLK_USB_DDM		6
+#define R8A7744_CLK_IRQC		7
+#define R8A7744_CLK_INTC_SYS		8
+
+/* MSTP5 */
+#define R8A7744_CLK_AUDIO_DMAC1		1
+#define R8A7744_CLK_AUDIO_DMAC0		2
+#define R8A7744_CLK_THERMAL		22
+#define R8A7744_CLK_PWM			23
+#define R8A7744_CLK_BOOT_ROM		26
+
+/* MSTP7 */
+#define R8A7744_CLK_USB_EHCI		3
+#define R8A7744_CLK_HSUSB		4
+#define R8A7744_CLK_HSCIF2		13
+#define R8A7744_CLK_SCIF5		14
+#define R8A7744_CLK_SCIF4		15
+#define R8A7744_CLK_HSCIF1		16
+#define R8A7744_CLK_HSCIF0		17
+#define R8A7744_CLK_SCIF3		18
+#define R8A7744_CLK_SCIF2		19
+#define R8A7744_CLK_SCIF1		20
+#define R8A7744_CLK_SCIF0		21
+#define R8A7744_CLK_DU1			23
+#define R8A7744_CLK_DU0			24
+#define R8A7744_CLK_LVDS0		26
+
+/* MSTP8 */
+#define R8A7744_CLK_IPMMU_SGX		0
+#define R8A7744_CLK_VIN2		9
+#define R8A7744_CLK_VIN1		10
+#define R8A7744_CLK_VIN0		11
+#define R8A7744_CLK_ETHERAVB		12
+#define R8A7744_CLK_ETHER		13
+#define R8A7744_CLK_SATA1		14
+#define R8A7744_CLK_SATA0		15
+#define R8A7744_CLK_DCU			30
+
+/* MSTP9 */
+#define R8A7744_CLK_GPIO7		4
+#define R8A7744_CLK_GPIO6		5
+#define R8A7744_CLK_GPIO5		7
+#define R8A7744_CLK_GPIO4		8
+#define R8A7744_CLK_GPIO3		9
+#define R8A7744_CLK_GPIO2		10
+#define R8A7744_CLK_GPIO1		11
+#define R8A7744_CLK_GPIO0		12
+#define R8A7744_CLK_RCAN1		15
+#define R8A7744_CLK_RCAN0		16
+#define R8A7744_CLK_QSPI_MOD		17
+#define R8A7744_CLK_I2C5		25
+#define R8A7744_CLK_IICDVFS		26
+#define R8A7744_CLK_I2C4		27
+#define R8A7744_CLK_I2C3		28
+#define R8A7744_CLK_I2C2		29
+#define R8A7744_CLK_I2C1		30
+#define R8A7744_CLK_I2C0		31
+
+/* MSTP10 */
+#define R8A7744_CLK_SSI_ALL		5
+#define R8A7744_CLK_SSI9		6
+#define R8A7744_CLK_SSI8		7
+#define R8A7744_CLK_SSI7		8
+#define R8A7744_CLK_SSI6		9
+#define R8A7744_CLK_SSI5		10
+#define R8A7744_CLK_SSI4		11
+#define R8A7744_CLK_SSI3		12
+#define R8A7744_CLK_SSI2		13
+#define R8A7744_CLK_SSI1		14
+#define R8A7744_CLK_SSI0		15
+#define R8A7744_CLK_SCU_ALL		17
+#define R8A7744_CLK_SCU_DVC1		18
+#define R8A7744_CLK_SCU_DVC0		19
+#define R8A7744_CLK_SCU_CTU1_MIX1	20
+#define R8A7744_CLK_SCU_CTU0_MIX0	21
+#define R8A7744_CLK_SCU_SRC9		22
+#define R8A7744_CLK_SCU_SRC8		23
+#define R8A7744_CLK_SCU_SRC7		24
+#define R8A7744_CLK_SCU_SRC6		25
+#define R8A7744_CLK_SCU_SRC5		26
+#define R8A7744_CLK_SCU_SRC4		27
+#define R8A7744_CLK_SCU_SRC3		28
+#define R8A7744_CLK_SCU_SRC2		29
+#define R8A7744_CLK_SCU_SRC1		30
+#define R8A7744_CLK_SCU_SRC0		31
+
+/* MSTP11 */
+#define R8A7744_CLK_SCIFA3		6
+#define R8A7744_CLK_SCIFA4		7
+#define R8A7744_CLK_SCIFA5		8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7744_H__ */
Signature · 1 line
2.7.4
author
#5 lore raw

PATCH 5/21 clk: shmobile: Compile clk-rcar-gen2.c when using the r8a7744

In reply to Biju Das

This patch makes sure clk-rcar-gen2,c gets compiled when CONFIG_ARCH_R8A7744 is selected, similarly to what done by commit:
7bac4ad3e40f ("CIP: Build essential clock driver for Renesas RZ/G1 platforms")

---
 drivers/clk/shmobile/Makefile | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/shmobile/Makefile +1 -0
index 2412eb9..6badac5 100644
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o
 obj-$(CONFIG_ARCH_R8A73A4)		+= clk-r8a73a4.o
 obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7743)		+= clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7744)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7745)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A77470)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7778)		+= clk-r8a7778.o
Signature · 1 line
2.7.4

A message that is not in the archive (sent off-list or not yet received): 20191115080651.GA21006@amd

A message that is not in the archive (sent off-list or not yet received): OSBPR01MB21032CB3ACC0EC42F5945DEFB8700@OSBPR01MB2103.jpnprd01.prod.outlook.com

A message that is not in the archive (sent off-list or not yet received): 20191115093713.GA25603@amd

A message that is not in the archive (sent off-list or not yet received): OSBPR01MB2103A89B8A8F7B23CBFC97FCB8700@OSBPR01MB2103.jpnprd01.prod.outlook.com

#10 lore raw

PATCH 5/21 clk: shmobile: Compile clk-rcar-gen2.c when using the r8a7744

Hi!

Quoted 21 lines
Quoted 21 lines
Quoted 2 lines
Quoted 2 lines

Review obj-$(CONFIG_ARCH_R7S72100) +=

Quoted 2 lines

+++ b/drivers/clk/shmobile/Makefile

(quoted diff) +0 -0
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_R7S72100)		+=

clk-rz.o

Quoted 17 lines
Quoted 11 lines

drivers/clk/shmobile/Makefile obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o · line 9

Quoted 7 lines
drivers/clk/shmobile/Makefile +1 -0
 obj-$(CONFIG_ARCH_R8A73A4)		+= clk-r8a73a4.o
 obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7743)		+= clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7744)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7745)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A77470)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7778)		+= clk-r8a7778.o

This is kind-of interesting code. I'm okay with merging it as-is, but would it be possible to select more suitable config option so that same object file is not included 4 times?

What about the others on the same file?
11 obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o

 12 obj-$(CONFIG_ARCH_R8A7791)              += clk-rcar-gen2.o
 13 obj-$(CONFIG_ARCH_R8A7793)              += clk-rcar-gen2.o
 14 obj-$(CONFIG_ARCH_R8A7794)              += clk-rcar-gen2.o
Quoted 6 lines
Quoted 3 lines

Could these all be replaced with

obj-$(CONFIG_ARCH_RCAR_GEN2) += clk-rcar-gen2.o

On the mainline it is modified like this. Do you want me to backport the relevant changes or are you happy to do this? Please let me know.
obj-$(CONFIG_CLK_RCAR_GEN2) += clk-rcar-gen2.o

If it is easy, please backport relevant changes. If it is not, it can stay this way.

Best regards,
Pavel

Signature · 9 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 195 bytes
Desc: not available
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20191115/0bce16a0/attachment.sig>
author
#11 lore raw

PATCH 6/21 ARM: shmobile: r8a7744: Basic SoC support

In reply to Biju Das

commit bc8871536246e489407a7114a597c0a2a72de895 upstream.

Add minimal support for the RZ/G1N (R8A7744) SoC.

[ removed compatible string renesas,r8a7744-cpg-mssr ]
---
 arch/arm/mach-shmobile/Kconfig           | 5 +++++
 arch/arm/mach-shmobile/pm-rcar-gen2.c    | 2 ++
 arch/arm/mach-shmobile/setup-rcar-gen2.c | 1 +
 3 files changed, 8 insertions(+)
arch/arm/mach-shmobile/Kconfig +5 -0
index 31549b7..79b66a1 100644
@@ -68,6 +68,11 @@ config ARCH_R8A7743
 	bool "RZ/G1M (R8A77430)"
 	select ARCH_RCAR_GEN2
 
+config ARCH_R8A7744
+	bool "RZ/G1N (R8A77440)"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+
 config ARCH_R8A7745
 	bool "RZ/G1E (R8A77450)"
 	select ARCH_RCAR_GEN2
arch/arm/mach-shmobile/pm-rcar-gen2.c +2 -0
index 419575e..dd1c9e0 100644
@@ -99,6 +99,8 @@ void __init rcar_gen2_pm_init(void)
 		syscier = 0x00111003;
 	else if (of_machine_is_compatible("renesas,r8a7743"))
 		syscier = 0x00101003;
+	else if (of_machine_is_compatible("renesas,r8a7744"))
+		syscier = 0x00101003;
 	else if (of_machine_is_compatible("renesas,r8a7745"))
 		syscier = 0x00300060;
 	else if (of_machine_is_compatible("renesas,r8a77470"))
arch/arm/mach-shmobile/setup-rcar-gen2.c +1 -0
index 6e0c0ce..50c57c8 100644
@@ -208,6 +208,7 @@ MACHINE_END
 
 static const char * const rz_g1_boards_compat_dt[] __initconst = {
 	"renesas,r8a7743",
+	"renesas,r8a7744",
 	"renesas,r8a7745",
 	"renesas,r8a77470",
 	NULL,
Signature · 1 line
2.7.4
author
#12 lore raw

PATCH 7/21 clk: shmobile: Document r8a7744 CPG clock support

In reply to Biju Das

Document r8a7744 CPG clock support.

The clock driver architecture has changed quite dramatically over time, there is nothing we can backport from mainline for this, hence the new patch.

---
 Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +1 -0
index ba321bc..631cd38 100644
@@ -9,6 +9,7 @@ Required Properties:
 
   - compatible: Must be one of
     - "renesas,r8a7743-cpg-clocks" for the r8a7743 CPG
+    - "renesas,r8a7744-cpg-clocks" for the r8a7744 CPG
     - "renesas,r8a7745-cpg-clocks" for the r8a7745 CPG
     - "renesas,r8a77470-cpg-clocks" for the r8a77470 CPG
     - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
Signature · 1 line
2.7.4
author
#13 lore raw

PATCH 8/21 clk: shmobile: Document r8a7744 MSTP clock support

In reply to Biju Das

Document r8a7744 MSTP clock support.

The clock driver architecture has changed quite dramatically over time, there is nothing we can backport from mainline for this, hence the new patch.

---
 Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +1 -0
index a9d2e65..1f64680 100644
@@ -14,6 +14,7 @@ Required Properties:
     - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks
     - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
     - "renesas,r8a7743-mstp-clocks" for R8A7743 (RZ/G1M) MSTP gate clocks
+    - "renesas,r8a7744-mstp-clocks" for R8A7744 (RZ/G1N) MSTP gate clocks
     - "renesas,r8a7745-mstp-clocks" for R8A7745 (RZ/G1E) MSTP gate clocks
     - "renesas,r8a77470-mstp-clocks" for R8A77470 (RZ/G1C) MSTP gate clocks
     - "renesas,r8a7778-mstp-clocks" for R8A7778 (R-Car M1) MSTP gate clocks
Signature · 1 line
2.7.4
author
#14 lore raw

PATCH 9/21 clk: shmobile: Document r8a7744 CPG DIV6 clock support

In reply to Biju Das

Document r8a7744 CPG DIV6 clock support.

The clock driver architecture has changed quite dramatically over time, there is nothing we can backport from mainline for this, hence the new patch.

---
 Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt +1 -0
index 3a05843..7b05aff 100644
@@ -10,6 +10,7 @@ Required Properties:
     - "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks
     - "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks
     - "renesas,r8a7743-div6-clock" for R8A7743 (RZ/G1M) DIV6 clocks
+    - "renesas,r8a7744-div6-clock" for R8A7744 (RZ/G1N) DIV6 clocks
     - "renesas,r8a7745-div6-clock" for R8A7745 (RZ/G1E) DIV6 clocks
     - "renesas,r8a77470-div6-clock" for R8A77470 (RZ/G1C) DIV6 clocks
     - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks
Signature · 1 line
2.7.4
author
#15 lore raw

PATCH 10/21 ARM: multi_v7_defconfig: Enable r8a7744 SoC

In reply to Biju Das

commit 4f743344ddedca8edb440b3fb8e67ba6e292b4f6 upstream.

Enable recently added r8a7744 (RZ/G1N) SoC.

---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/multi_v7_defconfig +1 -0
index a3ba031..f969bb2 100644
@@ -81,6 +81,7 @@ CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
 CONFIG_ARCH_R8A7740=y
 CONFIG_ARCH_R8A7743=y
+CONFIG_ARCH_R8A7744=y
 CONFIG_ARCH_R8A7745=y
 CONFIG_ARCH_R8A77470=y
 CONFIG_ARCH_R8A7778=y
Signature · 1 line
2.7.4
author
#16 lore raw

PATCH 11/21 ARM: shmobile: defconfig: Enable r8a7744 SoC

In reply to Biju Das

commit c26eb6f34c9ea56ed795785ecb7938f008dfed1e upstream.

Enable recently added r8a7744 (RZ/G1N) SoC.

---
 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/shmobile_defconfig +1 -0
index 6f5522f..9e48feb 100644
@@ -15,6 +15,7 @@ CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
 CONFIG_ARCH_R8A7740=y
 CONFIG_ARCH_R8A7743=y
+CONFIG_ARCH_R8A7744=y
 CONFIG_ARCH_R8A7745=y
 CONFIG_ARCH_R8A77470=y
 CONFIG_ARCH_R8A7778=y
Signature · 1 line
2.7.4
author
#17 lore raw

PATCH 12/21 ARM: debug-ll: Add support for r8a7744

In reply to Biju Das

commit abf3bf537d298db18ad929ceb71c0353d6794f42 upstream.

Enable low-level debugging support for RZ/G1N (R8A7744). RZ/G1N uses SCIF0 for the debug console.

---
 arch/arm/Kconfig.debug | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
arch/arm/Kconfig.debug +4 -3
index e5c9e93..c4ac149 100644
@@ -818,11 +818,12 @@ choice
 
 	config DEBUG_RCAR_GEN2_SCIF0
 		bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
-		depends on ARCH_R8A7743 || ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
+		depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \
+			ARCH_R8A7791 || ARCH_R8A7793
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  via SCIF0 on Renesas RZ/G1M (R8A7743), R-Car H2 (R8A7790),
-		  M2-W (R8A7791), or M2-N (R8A7793).
+		  via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744),
+		  R-Car H2 (R8A7790), M2-W (R8A7791), or M2-N (R8A7793).
 
 	config DEBUG_RCAR_GEN2_SCIF1
 		bool "Kernel low-level debugging messages via SCIF1 on R8A77470"
Signature · 1 line
2.7.4
author
#18 lore raw

PATCH 13/21 dt-bindings: pinctrl: sh-pfc: Document r8a7744 PFC support

In reply to Biju Das

commit a6a7d2c2dc668fb19bc16b4cda397cb1831df54d upstream.

Document PFC support for the RZ/G1N (R8A7744) SoC.

---
 Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +1 -0
index b2264d9..f2008d0 100644
@@ -14,6 +14,7 @@ Required Properties:
     - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
     - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
     - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
+    - "renesas,pfc-r8a7744": for R8A7744 (RZ/G1N) compatible pin-controller.
     - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
     - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller.
     - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
Signature · 1 line
2.7.4
author
#19 lore raw

PATCH 14/21 pinctrl: sh-pfc: r8a7791: Add r8a7744 support

In reply to Biju Das

commit d7097b97e91362ded242e5516f8d97b985f60941 upstream.

Renesas RZ/G1N (R8A7744) is pin compatible with R-Car M2-W/N (R8A7791/3) and RZ/G1M.

---
 drivers/pinctrl/sh-pfc/Kconfig       |  5 +++++
 drivers/pinctrl/sh-pfc/Makefile      |  1 +
 drivers/pinctrl/sh-pfc/core.c        |  6 ++++++
 drivers/pinctrl/sh-pfc/core.h        |  1 +
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 21 +++++++++++++++++++++
 5 files changed, 34 insertions(+)
drivers/pinctrl/sh-pfc/Kconfig +5 -0
index ab15d19..eef770b 100644
@@ -40,6 +40,11 @@ config PINCTRL_PFC_R8A7743
 	depends on ARCH_R8A7743
 	select PINCTRL_SH_PFC
 
+config PINCTRL_PFC_R8A7744
+	def_bool y
+	depends on ARCH_R8A7744
+	select PINCTRL_SH_PFC
+
 config PINCTRL_PFC_R8A7745
         def_bool y
         depends on ARCH_R8A7745
drivers/pinctrl/sh-pfc/Makefile +1 -0
index e9ef2cc..5310c07 100644
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_PFC_EMEV2)	+= pfc-emev2.o
 obj-$(CONFIG_PINCTRL_PFC_R8A73A4)	+= pfc-r8a73a4.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7740)	+= pfc-r8a7740.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7743)	+= pfc-r8a7791.o
+obj-$(CONFIG_PINCTRL_PFC_R8A7744)	+= pfc-r8a7791.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7745)	+= pfc-r8a7794.o
 obj-$(CONFIG_PINCTRL_PFC_R8A77470)	+= pfc-r8a77470.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7778)	+= pfc-r8a7778.o
drivers/pinctrl/sh-pfc/core.c +6 -0
index c3a3283..6827a39 100644
@@ -459,6 +459,12 @@ static const struct of_device_id sh_pfc_of_table[] = {
 		.data = &r8a7743_pinmux_info,
 	},
 #endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7744
+	{
+		.compatible = "renesas,pfc-r8a7744",
+		.data = &r8a7744_pinmux_info,
+	},
+#endif
 #ifdef CONFIG_PINCTRL_PFC_R8A7745
 	{
 		.compatible = "renesas,pfc-r8a7745",
drivers/pinctrl/sh-pfc/core.h +1 -0
index 37acc88..5675ecf 100644
@@ -70,6 +70,7 @@ extern const struct sh_pfc_soc_info emev2_pinmux_info;
 extern const struct sh_pfc_soc_info r8a73a4_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7740_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7743_pinmux_info;
+extern const struct sh_pfc_soc_info r8a7744_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7745_pinmux_info;
 extern const struct sh_pfc_soc_info r8a77470_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7778_pinmux_info;
drivers/pinctrl/sh-pfc/pfc-r8a7791.c +21 -0
index 4f971a9..f8bbc70 100644
@@ -6623,6 +6623,27 @@ const struct sh_pfc_soc_info r8a7743_pinmux_info = {
 };
 #endif
 
+#ifdef CONFIG_PINCTRL_PFC_R8A7744
+const struct sh_pfc_soc_info r8a7744_pinmux_info = {
+	.name = "r8a77440_pfc",
+	.unlock_reg = 0xe6060000, /* PMMR */
+
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.pins = pinmux_pins,
+	.nr_pins = ARRAY_SIZE(pinmux_pins),
+	.groups = pinmux_groups.common,
+	.nr_groups = ARRAY_SIZE(pinmux_groups.common),
+	.functions = pinmux_functions.common,
+	.nr_functions = ARRAY_SIZE(pinmux_functions.common),
+
+	.cfg_regs = pinmux_config_regs,
+
+	.pinmux_data = pinmux_data,
+	.pinmux_data_size = ARRAY_SIZE(pinmux_data),
+};
+#endif
+
 #ifdef CONFIG_PINCTRL_PFC_R8A7791
 const struct sh_pfc_soc_info r8a7791_pinmux_info = {
 	.name = "r8a77910_pfc",
Signature · 1 line
2.7.4
author
#20 lore raw

PATCH 15/21 ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi

In reply to Biju Das

commit e0a39511dafd7e302a974f5cbdfc9c8afffa98d8 upstream.

PCIe is not populated by default on iWave RZ/G1N board. RZ/G1N board is almost identical to RZ/G1M. In order to reuse the common dtsi for both the boards, it is required to move pcie node from common dtsi to board specific dts.

---
 arch/arm/boot/dts/iwg20d-q7-common.dtsi         | 4 ----
 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts | 4 ++++
 arch/arm/boot/dts/r8a7743-iwg20d-q7.dts         | 4 ++++
 3 files changed, 8 insertions(+), 4 deletions(-)
arch/arm/boot/dts/iwg20d-q7-common.dtsi +0 -4
index 6920e3f..9abc25f 100644
@@ -163,10 +163,6 @@
 	clock-frequency = <100000000>;
 };
 
-&pciec {
-	status = "okay";
-};
-
 &pfc {
 	can0_pins: can0 {
 		groups = "can0_data_d";
arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts +4 -0
index d90eb84..b912909 100644
@@ -17,3 +17,7 @@
 	model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board";
 	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
 };
+
+&pciec {
+	status = "okay";
+};
arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +4 -0
index 6aa6b74..bf9ed98 100644
@@ -16,3 +16,7 @@
 	model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
 	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
 };
+
+&pciec {
+	status = "okay";
+};
Signature · 1 line
2.7.4
author
#21 lore raw

PATCH 16/21 dt-bindings: serial: sh-sci: Document r8a7744 bindings

In reply to Biju Das

commit 9e3eb4eabdb6f652ca8a99f58f3eccf29610839d upstream.

RZ/G1N (R8A7744) SoC also has the R-Car gen2 compatible SCIF, SCIFA, SCIFB, and HSCIF ports, so document the SoC specific bindings.

---
 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +4 -0
index 3772d4c..d2db856 100644
@@ -13,6 +13,10 @@ Required properties:
     - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART.
     - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART.
     - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART.
+    - "renesas,scif-r8a7744" for R8A7744 (RZ/G1N) SCIF compatible UART.
+    - "renesas,scifa-r8a7744" for R8A7744 (RZ/G1N) SCIFA compatible UART.
+    - "renesas,scifb-r8a7744" for R8A7744 (RZ/G1N) SCIFB compatible UART.
+    - "renesas,hscif-r8a7744" for R8A7744 (RZ/G1N) HSCIF compatible UART.
     - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART.
     - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
     - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
Signature · 1 line
2.7.4
author
#22 lore raw

PATCH 17/21 ARM: dts: r8a7744: Initial SoC device tree

In reply to Biju Das

commit d83010f87ab31861eacac1ffe1278f655a376268 upstream.

Basic support for the RZ/G1N (R8A7744) SoC. Added placeholders to avoid compilation error with the common platform code.

[ Reworked on clock, reset and power-domains property ]
---
 arch/arm/boot/dts/r8a7744.dtsi | 778 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 778 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7744.dtsi
arch/arm/boot/dts/r8a7744.dtsi new file +778 -0
new file mode 100644
index 0000000..23afef3
@@ -0,0 +1,778 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a7744 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7744-clock.h>
+
+/ {
+	compatible = "renesas,r8a7744";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg_clocks R8A7744_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+			power-domains = <&cpg_clocks>;
+			next-level-cache = <&L2_CA15>;
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&cpg_clocks>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio at e6050000 {
+			reg = <0 0xe6050000 0 0x50>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			/* placeholder */
+		};
+
+		gpio1: gpio at e6051000 {
+			reg = <0 0xe6051000 0 0x50>;
+			#gpio-cells = <2>;
+			/* placeholder */
+		};
+
+		gpio2: gpio at e6052000 {
+			reg = <0 0xe6052000 0 0x50>;
+			#gpio-cells = <2>;
+			/* placeholder */
+		};
+
+		gpio6: gpio at e6055400 {
+			reg = <0 0xe6055400 0 0x50>;
+			#gpio-cells = <2>;
+			/* placeholder */
+		};
+
+		pfc: pin-controller at e6060000 {
+			compatible = "renesas,pfc-r8a7744";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		rst: reset-controller at e6160000 {
+			compatible = "renesas,r8a7744-rst";
+			reg = <0 0xe6160000 0 0x100>;
+		};
+
+		icram0:	sram at e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+		};
+
+		icram1:	sram at e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram at 0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		icram2:	sram at e6300000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe6300000 0 0x40000>;
+		};
+
+		i2c2: i2c at e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0xe6530000 0 0x40>;
+			/* placeholder */
+		};
+
+		i2c5: i2c at e6528000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0xe6528000 0 0x40>;
+			/* placeholder */
+		};
+
+		hsusb: usb at e6590000 {
+			reg = <0 0xe6590000 0 0x100>;
+			/* placeholder */
+		};
+
+		usbphy: usb-phy at e6590100 {
+			reg = <0 0xe6590100 0 0x100>;
+			/* placeholder */
+		};
+
+		avb: ethernet at e6800000 {
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* placeholder */
+		};
+
+		scifb1: serial at e6c30000 {
+			reg = <0 0xe6c30000 0 0x100>;
+			/* placeholder */
+		};
+
+		scif0: serial at e6e60000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7744_CLK_SCIF0>,
+				 <&zs_clk>, <&scif_clk>;
+			clock-names = "sci_ick", "brg_int", "scif_clk";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif1: serial at e6e68000 {
+			reg = <0 0xe6e68000 0 0x40>;
+			/* placeholder */
+		};
+
+		hscif1: serial at e62c8000 {
+			reg = <0 0xe62c8000 0 0x60>;
+			/* placeholder */
+		};
+
+		can0: can at e6e80000 {
+			reg = <0 0xe6e80000 0 0x1000>;
+			/* placeholder */
+		};
+
+		can1: can at e6e88000 {
+			reg = <0 0xe6e88000 0 0x1000>;
+			/* placeholder */
+		};
+
+		rcar_sound: sound at ec500000 {
+			reg = <0 0xec500000 0 0x1000>;
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {};
+				dvc1: dvc-1 {};
+			};
+
+			rcar_sound,src {
+				src2: src-2 {};
+				src3: src-3 {};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {};
+				ssi1: ssi-1 {};
+			};
+			/* placeholder */
+		};
+
+		pci0: pci at ee090000 {
+			reg = <0 0xee090000 0 0xc00>;
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			/* placeholder */
+		};
+
+		pci1: pci at ee0d0000 {
+			reg = <0 0xee0d0000 0 0xc00>;
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			/* placeholder */
+		};
+
+		sdhi1: sd at ee140000 {
+			reg = <0 0xee140000 0 0x100>;
+			/* placeholder */
+		};
+
+		sdhi2: sd at ee160000 {
+			reg = <0 0xee160000 0 0x100>;
+			/* placeholder */
+		};
+
+		gic: interrupt-controller at f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&mstp4_clks R8A7744_CLK_INTC_SYS>;
+			clock-names = "clk";
+			power-domains = <&cpg_clocks>;
+		};
+
+		du: display at feb00000 {
+			reg = <0 0xfeb00000 0 0x40000>,
+			      <0 0xfeb90000 0 0x1c>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port at 1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+			/* placeholder */
+		};
+
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			/* Special CPG clocks */
+			cpg_clocks: cpg_clocks at e6150000 {
+				compatible = "renesas,r8a7744-cpg-clocks",
+					     "renesas,rcar-gen2-cpg-clocks";
+				reg = <0 0xe6150000 0 0x1000>;
+				clocks = <&extal_clk &usb_extal_clk>;
+				#clock-cells = <1>;
+				clock-output-names = "main", "pll0", "pll1",
+						     "pll3", "lb", "qspi",
+						     "sdh", "sd0", "z", "rcan";
+				#power-domain-cells = <0>;
+			};
+
+			/* Variable factor clocks */
+			sd2_clk: sd2_clk at e6150078 {
+				compatible = "renesas,r8a7744-div6-clock",
+					     "renesas,cpg-div6-clock";
+				reg = <0 0xe6150078 0 4>;
+				clocks = <&pll1_div2_clk>;
+				#clock-cells = <0>;
+				clock-output-names = "sd2";
+			};
+			sd3_clk: sd3_clk at e615026c {
+				compatible = "renesas,r8a7744-div6-clock",
+					     "renesas,cpg-div6-clock";
+				reg = <0 0xe615026c 0 4>;
+				clocks = <&pll1_div2_clk>;
+				#clock-cells = <0>;
+				clock-output-names = "sd3";
+			};
+			mmc0_clk: mmc0_clk at e6150240 {
+				compatible = "renesas,r8a7744-div6-clock",
+					     "renesas,cpg-div6-clock";
+				reg = <0 0xe6150240 0 4>;
+				clocks = <&pll1_div2_clk>;
+				#clock-cells = <0>;
+				clock-output-names = "mmc0";
+			};
+
+			/* Fixed factor clocks */
+			pll1_div2_clk: pll1_div2_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <2>;
+				clock-mult = <1>;
+				clock-output-names = "pll1_div2";
+			};
+			zg_clk: zg_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <5>;
+				clock-mult = <1>;
+				clock-output-names = "zg";
+			};
+			zx_clk: zx_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <3>;
+				clock-mult = <1>;
+				clock-output-names = "zx";
+			};
+			zs_clk: zs_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <6>;
+				clock-mult = <1>;
+				clock-output-names = "zs";
+			};
+			hp_clk: hp_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <12>;
+				clock-mult = <1>;
+				clock-output-names = "hp";
+			};
+			b_clk: b_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <12>;
+				clock-mult = <1>;
+				clock-output-names = "b";
+			};
+			p_clk: p_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <24>;
+				clock-mult = <1>;
+				clock-output-names = "p";
+			};
+			cl_clk: cl_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <48>;
+				clock-mult = <1>;
+				clock-output-names = "cl";
+			};
+			m2_clk: m2_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <8>;
+				clock-mult = <1>;
+				clock-output-names = "m2";
+			};
+			rclk_clk: rclk_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <(48 * 1024)>;
+				clock-mult = <1>;
+				clock-output-names = "rclk";
+			};
+			oscclk_clk: oscclk_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL1>;
+				#clock-cells = <0>;
+				clock-div = <(12 * 1024)>;
+				clock-mult = <1>;
+				clock-output-names = "oscclk";
+			};
+			zb3_clk: zb3_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL3>;
+				#clock-cells = <0>;
+				clock-div = <4>;
+				clock-mult = <1>;
+				clock-output-names = "zb3";
+			};
+			zb3d2_clk: zb3d2_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL3>;
+				#clock-cells = <0>;
+				clock-div = <8>;
+				clock-mult = <1>;
+				clock-output-names = "zb3d2";
+			};
+			ddr_clk: ddr_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&cpg_clocks R8A7744_CLK_PLL3>;
+				#clock-cells = <0>;
+				clock-div = <8>;
+				clock-mult = <1>;
+				clock-output-names = "ddr";
+			};
+			mp_clk: mp_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&pll1_div2_clk>;
+				#clock-cells = <0>;
+				clock-div = <15>;
+				clock-mult = <1>;
+				clock-output-names = "mp";
+			};
+			cp_clk: cp_clk {
+				compatible = "fixed-factor-clock";
+				clocks = <&extal_clk>;
+				#clock-cells = <0>;
+				clock-div = <2>;
+				clock-mult = <1>;
+				clock-output-names = "cp";
+			};
+
+			/* Gate clocks */
+			mstp0_clks: mstp0_clks at e6150130 {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+				clocks = <&mp_clk>;
+				#clock-cells = <1>;
+				clock-indices = <R8A7744_CLK_MSIOF0>;
+				clock-output-names = "msiof0";
+			};
+			mstp1_clks: mstp1_clks at e6150134 {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+				clocks = <&zs_clk>, <&zs_clk>, <&p_clk>,
+					 <&zg_clk>, <&zs_clk>, <&zs_clk>,
+					 <&zs_clk>, <&p_clk>, <&p_clk>,
+					 <&rclk_clk>, <&cp_clk>, <&zs_clk>,
+					 <&zs_clk>, <&zs_clk>;
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_VCP0 R8A7744_CLK_VPC0
+					R8A7744_CLK_TMU1 R8A7744_CLK_3DG
+					R8A7744_CLK_2DDMAC R8A7744_CLK_FDP1_1
+					R8A7744_CLK_FDP1_0 R8A7744_CLK_TMU3
+					R8A7744_CLK_TMU2 R8A7744_CLK_CMT0
+					R8A7744_CLK_TMU0 R8A7744_CLK_VSP1_DU1
+					R8A7744_CLK_VSP1_DU0 R8A7744_CLK_VSP1_S
+				>;
+				clock-output-names =
+					"vcp0", "vpc0", "tmu1", "3dg",
+					"2ddmac", "fdp1-1", "fdp1-0", "tmu3",
+					"tmu2",	"cmt0",	"tmu0", "vsp1-du1",
+					"vsp1-du0", "vsp1-sy";
+			};
+			mstp2_clks: mstp2_clks at e6150138 {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+				clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>,
+					 <&mp_clk>, <&mp_clk>, <&mp_clk>,
+					 <&mp_clk>, <&mp_clk>, <&zs_clk>,
+					 <&zs_clk>;
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_SCIFA2 R8A7744_CLK_SCIFA1
+					R8A7744_CLK_SCIFA0 R8A7744_CLK_MSIOF2
+					R8A7744_CLK_SCIFB0 R8A7744_CLK_SCIFB1
+					R8A7744_CLK_MSIOF1 R8A7744_CLK_SCIFB2
+					R8A7744_CLK_SYS_DMAC1
+					R8A7744_CLK_SYS_DMAC0
+				>;
+				clock-output-names =
+					"scifa2", "scifa1", "scifa0", "msiof2",
+					"scifb0", "scifb1", "msiof1", "scifb2",
+					"sys-dmac1", "sys-dmac0";
+			};
+			mstp3_clks: mstp3_clks at e615013c {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+				clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>,
+					 <&cpg_clocks R8A7744_CLK_SD0>,
+					 <&mmc0_clk>, <&hp_clk>, <&mp_clk>,
+					 <&hp_clk>, <&mp_clk>, <&rclk_clk>,
+					 <&hp_clk>, <&hp_clk>;
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_TPU0 R8A7744_CLK_SDHI2
+					R8A7744_CLK_SDHI1 R8A7744_CLK_SDHI0
+					R8A7744_CLK_MMCIF0 R8A7744_CLK_IIC0
+					R8A7744_CLK_PCIEC R8A7744_CLK_IIC1
+					R8A7744_CLK_SSUSB R8A7744_CLK_CMT1
+					R8A7744_CLK_USBDMAC0
+					R8A7744_CLK_USBDMAC1
+				>;
+				clock-output-names =
+					"tpu0", "sdhi3", "sdhi2", "sdhi0",
+					"mmcif0", "i2c7", "pciec", "i2c8",
+					"ssusb", "cmt1", "usbdmac0",
+					"usbdmac1";
+			};
+			mstp4_clks: mstp4_clks at e6150140 {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+				clocks = <&rclk_clk>, <&cp_clk>, <&zs_clk>;
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_RWDT R8A7744_CLK_IRQC
+					R8A7744_CLK_INTC_SYS
+				>;
+				clock-output-names = "rwdt", "irqc", "intc-sys";
+			};
+			mstp5_clks: mstp5_clks at e6150144 {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+				clocks = <&hp_clk>, <&hp_clk>,
+					 <&extal_clk>, <&p_clk>;
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_AUDIO_DMAC0
+					R8A7744_CLK_AUDIO_DMAC1
+					R8A7744_CLK_THERMAL R8A7744_CLK_PWM
+				>;
+				clock-output-names = "audmac0", "audmac1",
+						     "thermal", "pwm";
+			};
+			mstp7_clks: mstp7_clks at e615014c {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+				clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>,
+					 <&p_clk>, <&p_clk>, <&zs_clk>,
+					 <&zs_clk>, <&p_clk>, <&p_clk>,
+					 <&p_clk>, <&p_clk>, <&zx_clk>,
+					 <&zx_clk>, <&zx_clk>;
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_USB_EHCI R8A7744_CLK_HSUSB
+					R8A7744_CLK_HSCIF2 R8A7744_CLK_SCIF5
+					R8A7744_CLK_SCIF4 R8A7744_CLK_HSCIF1
+					R8A7744_CLK_HSCIF0 R8A7744_CLK_SCIF3
+					R8A7744_CLK_SCIF2 R8A7744_CLK_SCIF1
+					R8A7744_CLK_SCIF0 R8A7744_CLK_DU1
+					R8A7744_CLK_DU0	R8A7744_CLK_LVDS0
+				>;
+				clock-output-names =
+					"ehci", "hsusb", "hscif2", "scif5",
+					"scif4", "hscif1", "hscif0", "scif3",
+					"scif2", "scif1", "scif0", "du1",
+					"du0", "lvds0";
+			};
+			mstp8_clks: mstp8_clks at e6150990 {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+				clocks = <&zx_clk>, <&zg_clk>, <&zg_clk>,
+					 <&zg_clk>, <&hp_clk>, <&p_clk>,
+					 <&zs_clk>, <&zs_clk>;
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_IPMMU_SGX
+					R8A7744_CLK_VIN2 R8A7744_CLK_VIN1
+					R8A7744_CLK_VIN0 R8A7744_CLK_ETHERAVB
+					R8A7744_CLK_ETHER R8A7744_CLK_SATA1
+					R8A7744_CLK_SATA0
+				>;
+				clock-output-names =
+					"ipmmu_sgx", "vin2", "vin1", "vin0",
+					"etheravb", "ether", "sata1", "sata0";
+			};
+			mstp9_clks: mstp9_clks at e6150994 {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+				clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>,
+					 <&cp_clk>, <&cp_clk>, <&cp_clk>,
+					 <&cp_clk>, <&cp_clk>, <&p_clk>,
+					 <&p_clk>,
+					 <&cpg_clocks R8A7744_CLK_QSPI>,
+					 <&hp_clk>, <&cp_clk>, <&hp_clk>,
+					 <&hp_clk>, <&hp_clk>, <&hp_clk>,
+					 <&hp_clk>;
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_GPIO7 R8A7744_CLK_GPIO6
+					R8A7744_CLK_GPIO5 R8A7744_CLK_GPIO4
+					R8A7744_CLK_GPIO3 R8A7744_CLK_GPIO2
+					R8A7744_CLK_GPIO1 R8A7744_CLK_GPIO0
+					R8A7744_CLK_RCAN1 R8A7744_CLK_RCAN0
+					R8A7744_CLK_QSPI_MOD R8A7744_CLK_I2C5
+					R8A7744_CLK_IICDVFS R8A7744_CLK_I2C4
+					R8A7744_CLK_I2C3 R8A7744_CLK_I2C2
+					R8A7744_CLK_I2C1 R8A7744_CLK_I2C0
+				>;
+				clock-output-names =
+					"gpio7", "gpio6", "gpio5", "gpio4",
+					"gpio3", "gpio2", "gpio1", "gpio0",
+					"rcan1", "rcan0", "qspi_mod", "i2c5",
+					"i2c6", "i2c4", "i2c3",	"i2c2", "i2c1",
+					"i2c0";
+			};
+			mstp10_clks: mstp10_clks at e6150998 {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+				clocks = <&p_clk>,
+					 <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+					 <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+					 <&p_clk>, <&p_clk>,
+					 <&p_clk>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>,
+					 <&mstp10_clks R8A7744_CLK_SCU_ALL>;
+
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_SSI_ALL
+					R8A7744_CLK_SSI9 R8A7744_CLK_SSI8
+					R8A7744_CLK_SSI7 R8A7744_CLK_SSI6
+					R8A7744_CLK_SSI5 R8A7744_CLK_SSI4
+					R8A7744_CLK_SSI3 R8A7744_CLK_SSI2
+					R8A7744_CLK_SSI1 R8A7744_CLK_SSI0
+					R8A7744_CLK_SCU_ALL
+					R8A7744_CLK_SCU_DVC1
+					R8A7744_CLK_SCU_DVC0
+					R8A7744_CLK_SCU_CTU1_MIX1
+					R8A7744_CLK_SCU_CTU0_MIX0
+					R8A7744_CLK_SCU_SRC9
+					R8A7744_CLK_SCU_SRC8
+					R8A7744_CLK_SCU_SRC7
+					R8A7744_CLK_SCU_SRC6
+					R8A7744_CLK_SCU_SRC5
+					R8A7744_CLK_SCU_SRC4
+					R8A7744_CLK_SCU_SRC3
+					R8A7744_CLK_SCU_SRC2
+					R8A7744_CLK_SCU_SRC1
+					R8A7744_CLK_SCU_SRC0
+				>;
+				clock-output-names =
+					"ssi-all",
+					"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
+					"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
+					"scu-all",
+					"scu-dvc1", "scu-dvc0",
+					"scu-ctu1-mix1", "scu-ctu0-mix0",
+					"scu-src9", "scu-src8", "scu-src7",
+					"scu-src6", "scu-src5", "scu-src4",
+					"scu-src3", "scu-src2",	"scu-src1",
+					"scu-src0";
+			};
+			mstp11_clks: mstp11_clks at e615099c {
+				compatible = "renesas,r8a7744-mstp-clocks",
+					     "renesas,cpg-mstp-clocks";
+				reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+				clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+				#clock-cells = <1>;
+				clock-indices = <
+					R8A7744_CLK_SCIFA3 R8A7744_CLK_SCIFA4
+					R8A7744_CLK_SCIFA5
+				>;
+				clock-output-names = "scifa3", "scifa4",
+						     "scifa5";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
Signature · 1 line
2.7.4
author
#23 lore raw

PATCH 18/21 dt-bindings: arm: renesas: Document iWave RZ/G1N SOM

In reply to Biju Das

commit 1deb430d291270f9d0067061a5dc7409819dfcfb upstream.

Document the iW-RainboW-G20M-RZ/G1N Qseven device tree bindings, listing it as a supported system on module.

---
 Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/shmobile.txt +2 -0
index 52ee47b..5e22f41 100644
@@ -63,6 +63,8 @@ Boards:
     compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"
   - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
     compatible = "iwave,g20m", "renesas,r8a7743"
+  - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
+    compatible = "iwave,g20m", "renesas,r8a7744"
   - Koelsch (RTP0RC7791SEB00010S)
     compatible = "renesas,koelsch", "renesas,r8a7791"
   - Kyoto Microcomputer Co. KZM-A9-Dual
Signature · 1 line
2.7.4
author
#24 lore raw

PATCH 19/21 dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board

In reply to Biju Das

commit ea456bf918e31a0f755c5c02963b4e10513fa82c upstream.

Document the iW-RainboW-G20D-Qseven-RZG1N device tree bindings, listing it as a supported board.

---
 Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/shmobile.txt +2 -0
index 5e22f41..26425a1 100644
@@ -63,6 +63,8 @@ Boards:
     compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"
   - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
     compatible = "iwave,g20m", "renesas,r8a7743"
+  - iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
+    compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744"
   - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
     compatible = "iwave,g20m", "renesas,r8a7744"
   - Koelsch (RTP0RC7791SEB00010S)
Signature · 1 line
2.7.4
author
#25 lore raw

PATCH 20/21 ARM: dts: r8a7744-iwg20m: Add iWave RZ/G1N Qseven SOM

In reply to Biju Das

commit 3c248aefe73b5586347dae74b0a8d40aea1018b3 upstream.

Add support for iWave RZ/G1N Qseven System On Module.

---
 arch/arm/boot/dts/r8a7744-iwg20m.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7744-iwg20m.dtsi
arch/arm/boot/dts/r8a7744-iwg20m.dtsi new file +31 -0
new file mode 100644
index 0000000..6166ae0
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave RZ/G1N Qseven SOM
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include "r8a7744.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "iwave,g20m", "renesas,r8a7744";
+
+	memory at 40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
Signature · 1 line
2.7.4
author
#26 lore raw

PATCH 21/21 ARM: dts: r8a7744-iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1N

In reply to Biju Das

commit 45c660ecdfd598eb93c46f5a95da6eb75008abb9 upstream.

Add support for iWave RainboW-G20D-Qseven board based on RZ/G1N.

---
 arch/arm/boot/dts/Makefile              |  1 +
 arch/arm/boot/dts/r8a7744-iwg20d-q7.dts | 15 +++++++++++++++
 2 files changed, 16 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
arch/arm/boot/dts/Makefile +1 -0
index 28fbcdb..88c3f12 100644
@@ -546,6 +546,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7740-armadillo800eva.dtb \
 	r8a7743-iwg20d-q7.dtb \
 	r8a7743-iwg20d-q7-dbcm-ca.dtb \
+	r8a7744-iwg20d-q7.dtb \
 	r8a7745-iwg22d-sodimm.dtb \
 	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
 	r8a77470-iwg23s-sbc.dtb \
arch/arm/boot/dts/r8a7744-iwg20d-q7.dts new file +15 -0
new file mode 100644
index 0000000..1fdac52
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1N Qseven board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7744-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+
+/ {
+	model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1N";
+	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744";
+};
Signature · 1 line
2.7.4