net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
Subsystems (3)
Vladimir Oltean
maintainerPATCH 1/1 net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
This sequence of operations:
ip link set dev br0 type bridge vlan_filtering 1
bridge vlan del dev swp2 vid 1
ip link set dev br0 type bridge vlan_filtering 1
ip link set dev br0 type bridge vlan_filtering 0
apparently fails with the message:
[ 31.305716] sja1105 spi0.1: Reset switch and programmed static config. Reason: VLAN filtering [ 31.322161] sja1105 spi0.1: Couldn't determine PVID attributes (pvid 0) [ 31.328939] sja1105 spi0.1: Failed to setup VLAN tagging for port 1: -2 [ 31.335599] ------------[ cut here ]------------ [ 31.340215] WARNING: CPU: 1 PID: 194 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4 [ 31.349981] br0: Commit of attribute (id=6) failed. [ 31.354890] Modules linked in: [ 31.357942] CPU: 1 PID: 194 Comm: ip Not tainted 5.4.0-rc6-01792-gf4f632e07665-dirty #2062 [ 31.366167] Hardware name: Freescale LS1021A [ 31.370437] [<c03144dc>] (unwind_backtrace) from [<c030e184>] (show_stack+0x10/0x14) [ 31.378153] [<c030e184>] (show_stack) from [<c11d1c1c>] (dump_stack+0xe0/0x10c) [ 31.385437] [<c11d1c1c>] (dump_stack) from [<c034c730>] (__warn+0xf4/0x10c) [ 31.392373] [<c034c730>] (__warn) from [<c034c7bc>] (warn_slowpath_fmt+0x74/0xb8) [ 31.399827] [<c034c7bc>] (warn_slowpath_fmt) from [<c11ca204>] (switchdev_port_attr_set_now+0x9c/0xa4) [ 31.409097] [<c11ca204>] (switchdev_port_attr_set_now) from [<c117036c>] (__br_vlan_filter_toggle+0x6c/0x118) [ 31.418971] [<c117036c>] (__br_vlan_filter_toggle) from [<c115d010>] (br_changelink+0xf8/0x518) [ 31.427637] [<c115d010>] (br_changelink) from [<c0f8e9ec>] (__rtnl_newlink+0x3f4/0x76c) [ 31.435613] [<c0f8e9ec>] (__rtnl_newlink) from [<c0f8eda8>] (rtnl_newlink+0x44/0x60) [ 31.443329] [<c0f8eda8>] (rtnl_newlink) from [<c0f89f20>] (rtnetlink_rcv_msg+0x2cc/0x51c) [ 31.451477] [<c0f89f20>] (rtnetlink_rcv_msg) from [<c1008df8>] (netlink_rcv_skb+0xb8/0x110) [ 31.459796] [<c1008df8>] (netlink_rcv_skb) from [<c1008648>] (netlink_unicast+0x17c/0x1f8) [ 31.468026] [<c1008648>] (netlink_unicast) from [<c1008980>] (netlink_sendmsg+0x2bc/0x3b4) [ 31.476261] [<c1008980>] (netlink_sendmsg) from [<c0f43858>] (___sys_sendmsg+0x230/0x250) [ 31.484408] [<c0f43858>] (___sys_sendmsg) from [<c0f44c84>] (__sys_sendmsg+0x50/0x8c) [ 31.492209] [<c0f44c84>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x28) [ 31.500090] Exception stack(0xedf47fa8 to 0xedf47ff0) [ 31.505122] 7fa0: 00000002 b6f2e060 00000003 beabd6a4 00000000 00000000 [ 31.513265] 7fc0: 00000002 b6f2e060 5d6e3213 00000128 00000000 00000001 00000006 000619c4 [ 31.521405] 7fe0: 00086078 beabd658 0005edbc b6e7ce68
The reason is the implementation of br_get_pvid:
static inline u16 br_get_pvid(const struct net_bridge_vlan_group *vg)
{
if (!vg)
return 0;
smp_rmb();
return vg->pvid;
}Since VID 0 is an invalid pvid from the bridge's point of view, let's add this check in dsa_8021q_restore_pvid to avoid restoring a pvid that doesn't really exist.
--- net/dsa/tag_8021q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/dsa/tag_8021q.c +1 -1
@@ -106,7 +106,7 @@ static int dsa_8021q_restore_pvid(struct dsa_switch *ds, int port) slave = ds->ports[port].slave; err =br_vlan_get_pvid (slave, &pvid); -if (err <0 ) +if (!pvid || err <0 )/* There is no pvid on the bridge for this port, which is * perfectly valid. Nothing to restore, bye-bye! */
Signature · 1 line
2.17.1
Quoted 49 lines · Vladimir Oltean
This sequence of operations:
ip link set dev br0 type bridgevlan_filtering1
bridge vlan del dev swp2 vid 1
ip link set dev br0 type bridgevlan_filtering1
ip link set dev br0 type bridgevlan_filtering0apparently fails with the message:
[ 31.305716] sja1105 spi0.1: Reset switch and programmed static config. Reason: VLAN filtering [ 31.322161] sja1105 spi0.1: Couldn't determine PVID attributes (pvid 0) [ 31.328939] sja1105 spi0.1: Failed to setup VLAN tagging for port 1: -2 [ 31.335599] ------------[ cut here ]------------ [ 31.340215] WARNING: CPU: 1 PID: 194 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4 [ 31.349981] br0: Commit of attribute (id=6) failed. [ 31.354890] Modules linked in: [ 31.357942] CPU: 1 PID: 194 Comm: ip Not tainted 5.4.0-rc6-01792-gf4f632e07665-dirty #2062 [ 31.366167] Hardware name: Freescale LS1021A [ 31.370437] [<c03144dc>] (unwind_backtrace) from [<c030e184>] (show_stack+0x10/0x14) [ 31.378153] [<c030e184>] (show_stack) from [<c11d1c1c>] (dump_stack+0xe0/0x10c) [ 31.385437] [<c11d1c1c>] (dump_stack) from [<c034c730>] (__warn+0xf4/0x10c) [ 31.392373] [<c034c730>] (__warn) from [<c034c7bc>] (warn_slowpath_fmt+0x74/0xb8) [ 31.399827] [<c034c7bc>] (warn_slowpath_fmt) from [<c11ca204>] (switchdev_port_attr_set_now+0x9c/0xa4) [ 31.409097] [<c11ca204>] (switchdev_port_attr_set_now) from [<c117036c>] (__br_vlan_filter_toggle+0x6c/0x118) [ 31.418971] [<c117036c>] (__br_vlan_filter_toggle) from [<c115d010>] (br_changelink+0xf8/0x518) [ 31.427637] [<c115d010>] (br_changelink) from [<c0f8e9ec>] (__rtnl_newlink+0x3f4/0x76c) [ 31.435613] [<c0f8e9ec>] (__rtnl_newlink) from [<c0f8eda8>] (rtnl_newlink+0x44/0x60) [ 31.443329] [<c0f8eda8>] (rtnl_newlink) from [<c0f89f20>] (rtnetlink_rcv_msg+0x2cc/0x51c) [ 31.451477] [<c0f89f20>] (rtnetlink_rcv_msg) from [<c1008df8>] (netlink_rcv_skb+0xb8/0x110) [ 31.459796] [<c1008df8>] (netlink_rcv_skb) from [<c1008648>] (netlink_unicast+0x17c/0x1f8) [ 31.468026] [<c1008648>] (netlink_unicast) from [<c1008980>] (netlink_sendmsg+0x2bc/0x3b4) [ 31.476261] [<c1008980>] (netlink_sendmsg) from [<c0f43858>] (___sys_sendmsg+0x230/0x250) [ 31.484408] [<c0f43858>] (___sys_sendmsg) from [<c0f44c84>] (__sys_sendmsg+0x50/0x8c) [ 31.492209] [<c0f44c84>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x28) [ 31.500090] Exception stack(0xedf47fa8 to 0xedf47ff0) [ 31.505122] 7fa0: 00000002 b6f2e060 00000003 beabd6a4 00000000 00000000 [ 31.513265] 7fc0: 00000002 b6f2e060 5d6e3213 00000128 00000000 00000001 00000006 000619c4 [ 31.521405] 7fe0: 00086078 beabd658 0005edbc b6e7ce68The reason is the implementation of
br_get_pvid:static inline u16
br_get_pvid(const struct net_bridge_vlan_group *vg){ if (!vg) return 0; smp_rmb(); return vg->pvid; }
Quoted 6 lines
Since VID 0 is an invalid pvid from the bridge's point of view, let's add this check in
dsa_8021q_restore_pvidto avoid restoring a pvid that doesn't really exist.Fixes 5f33183b7fdf ("net: dsa: tag_8021q: Restore bridge VLANs when enabling vlan_filtering")Signed-off-by Vladimir Oltean <[email protected]>
Andrew
From: Vladimir Oltean <[email protected]>
Date: Sat, 16 Nov 2019 18:08:25 +0200
Quoted 7 lines
This sequence of operations:
ip link set dev br0 type bridgevlan_filtering1
bridge vlan del dev swp2 vid 1
ip link set dev br0 type bridgevlan_filtering1
ip link set dev br0 type bridgevlan_filtering0apparently fails with the message:
...
Quoted 11 lines
The reason is the implementation of
br_get_pvid:static inline u16
br_get_pvid(const struct net_bridge_vlan_group *vg){ if (!vg) return 0; smp_rmb(); return vg->pvid; }
Quoted 6 lines
Since VID 0 is an invalid pvid from the bridge's point of view, let's add this check in
dsa_8021q_restore_pvidto avoid restoring a pvid that doesn't really exist.Fixes 5f33183b7fdf ("net: dsa: tag_8021q: Restore bridge VLANs when enabling vlan_filtering")Signed-off-by Vladimir Oltean <[email protected]>
Applied, thanks.