Skip to contentSkip to conversation

net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid

PATCH In review Vladimir Oltean 3 participants 4 messages Nov 16, 2019

Subsystems (3)
lore
Share & tools
lore

Vladimir Oltean

author maintainer
#0 lore raw

PATCH 1/1 net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid

This sequence of operations:
ip link set dev br0 type bridge vlan_filtering 1
bridge vlan del dev swp2 vid 1
ip link set dev br0 type bridge vlan_filtering 1
ip link set dev br0 type bridge vlan_filtering 0

apparently fails with the message:

[   31.305716] sja1105 spi0.1: Reset switch and programmed static config. Reason: VLAN filtering
[   31.322161] sja1105 spi0.1: Couldn't determine PVID attributes (pvid 0)
[   31.328939] sja1105 spi0.1: Failed to setup VLAN tagging for port 1: -2
[   31.335599] ------------[ cut here ]------------
[   31.340215] WARNING: CPU: 1 PID: 194 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4
[   31.349981] br0: Commit of attribute (id=6) failed.
[   31.354890] Modules linked in:
[   31.357942] CPU: 1 PID: 194 Comm: ip Not tainted 5.4.0-rc6-01792-gf4f632e07665-dirty #2062
[   31.366167] Hardware name: Freescale LS1021A
[   31.370437] [<c03144dc>] (unwind_backtrace) from [<c030e184>] (show_stack+0x10/0x14)
[   31.378153] [<c030e184>] (show_stack) from [<c11d1c1c>] (dump_stack+0xe0/0x10c)
[   31.385437] [<c11d1c1c>] (dump_stack) from [<c034c730>] (__warn+0xf4/0x10c)
[   31.392373] [<c034c730>] (__warn) from [<c034c7bc>] (warn_slowpath_fmt+0x74/0xb8)
[   31.399827] [<c034c7bc>] (warn_slowpath_fmt) from [<c11ca204>] (switchdev_port_attr_set_now+0x9c/0xa4)
[   31.409097] [<c11ca204>] (switchdev_port_attr_set_now) from [<c117036c>] (__br_vlan_filter_toggle+0x6c/0x118)
[   31.418971] [<c117036c>] (__br_vlan_filter_toggle) from [<c115d010>] (br_changelink+0xf8/0x518)
[   31.427637] [<c115d010>] (br_changelink) from [<c0f8e9ec>] (__rtnl_newlink+0x3f4/0x76c)
[   31.435613] [<c0f8e9ec>] (__rtnl_newlink) from [<c0f8eda8>] (rtnl_newlink+0x44/0x60)
[   31.443329] [<c0f8eda8>] (rtnl_newlink) from [<c0f89f20>] (rtnetlink_rcv_msg+0x2cc/0x51c)
[   31.451477] [<c0f89f20>] (rtnetlink_rcv_msg) from [<c1008df8>] (netlink_rcv_skb+0xb8/0x110)
[   31.459796] [<c1008df8>] (netlink_rcv_skb) from [<c1008648>] (netlink_unicast+0x17c/0x1f8)
[   31.468026] [<c1008648>] (netlink_unicast) from [<c1008980>] (netlink_sendmsg+0x2bc/0x3b4)
[   31.476261] [<c1008980>] (netlink_sendmsg) from [<c0f43858>] (___sys_sendmsg+0x230/0x250)
[   31.484408] [<c0f43858>] (___sys_sendmsg) from [<c0f44c84>] (__sys_sendmsg+0x50/0x8c)
[   31.492209] [<c0f44c84>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x28)
[   31.500090] Exception stack(0xedf47fa8 to 0xedf47ff0)
[   31.505122] 7fa0:                   00000002 b6f2e060 00000003 beabd6a4 00000000 00000000
[   31.513265] 7fc0: 00000002 b6f2e060 5d6e3213 00000128 00000000 00000001 00000006 000619c4
[   31.521405] 7fe0: 00086078 beabd658 0005edbc b6e7ce68

The reason is the implementation of br_get_pvid:

static inline u16 br_get_pvid(const struct net_bridge_vlan_group *vg)

{
	if (!vg)
		return 0;

	smp_rmb();
	return vg->pvid;
}

Since VID 0 is an invalid pvid from the bridge's point of view, let's add this check in dsa_8021q_restore_pvid to avoid restoring a pvid that doesn't really exist.

Fixes 5f33183b7fdf ("net: dsa: tag_8021q: Restore bridge VLANs when enabling vlan_filtering")
---
 net/dsa/tag_8021q.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/dsa/tag_8021q.c +1 -1
index 73632d21f1a6..2fb6c26294b5 100644
@@ -105,7 +105,7 @@ static int dsa_8021q_restore_pvid(struct dsa_switch *ds, int port)
 	slave = dsa_to_port(ds, port)->slave;
 
 	err = br_vlan_get_pvid(slave, &pvid);
-	if (err < 0)
+	if (!pvid || err < 0)
 		/* There is no pvid on the bridge for this port, which is
 		 * perfectly valid. Nothing to restore, bye-bye!
 		 */
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 9 lines · Vladimir Oltean

This sequence of operations:
ip link set dev br0 type bridge vlan_filtering 1 bridge vlan del dev swp2 vid 1
ip link set dev br0 type bridge vlan_filtering 1 ip link set dev br0 type bridge vlan_filtering 0

net/dsa/tag_8021q.c static int dsa_8021q_restore_pvid(struct dsa_switch *ds, int port) · line 111

Quoted 8 lines
net/dsa/tag_8021q.c +1 -1
@@ -105,7 +105,7 @@ static int dsa_8021q_restore_pvid(struct dsa_switch *ds, int port)
 	slave = dsa_to_port(ds, port)->slave;
 
 	err = br_vlan_get_pvid(slave, &pvid);
-	if (err < 0)
+	if (!pvid || err < 0)
 		/* There is no pvid on the bridge for this port, which is
 		 * perfectly valid. Nothing to restore, bye-bye!
 		 */

This looks very similar to the previous patch. Some explanation would be good. Did you send it for the wrong tree? Or are there really different fixes for different trees?

Thanks
Andrew

author maintainer
#2 lore raw
Quoted 24 lines · Andrew Lunn
Quoted 9 lines · Vladimir Oltean

This sequence of operations:
ip link set dev br0 type bridge vlan_filtering 1 bridge vlan del dev swp2 vid 1
ip link set dev br0 type bridge vlan_filtering 1 ip link set dev br0 type bridge vlan_filtering 0

net/dsa/tag_8021q.c static int dsa_8021q_restore_pvid(struct dsa_switch *ds, int port) · line 111

Quoted 8 lines
net/dsa/tag_8021q.c +1 -1
@@ -105,7 +105,7 @@ static int dsa_8021q_restore_pvid(struct dsa_switch *ds, int port)
      slave = dsa_to_port(ds, port)->slave;
 
      err = br_vlan_get_pvid(slave, &pvid);
-     if (err < 0)
+     if (!pvid || err < 0)
              /* There is no pvid on the bridge for this port, which is
               * perfectly valid. Nothing to restore, bye-bye!
               */

This looks very similar to the previous patch. Some explanation would be good. Did you send it for the wrong tree? Or are there really different fixes for different trees?

Quoted 2 lines

Thanks
Andrew

Hi Andrew,

The context is different:
dsa_to_port(ds, port)
vs
ds->ports[port]

This is due to Vivien's recent rework in DSA's port list vs port array.

Regards,
-Vladimir

maintainer
#3 lore raw
In reply to Vladimir Oltean

Please do not submit parallel fixes for net and net-next.

Just submit the 'net' fix and when 'net' is nexted merged into 'net-next' the fix will propagate.