Skip to contentSkip to conversation

selftests/clone3: flush stdout and stderr before clone3() and _exit()

PATCH In review Andrei Vagin 2 participants 7 messages Nov 18, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 selftests/clone3: flush stdout and stderr before clone3() and _exit()

Buffers have to be flushed before clone3() to avoid double messages in the log.

---
 tools/testing/selftests/clone3/clone3_selftests.h |  2 ++
 tools/testing/selftests/clone3/clone3_set_tid.c   | 15 +++++++++++----
 2 files changed, 13 insertions(+), 4 deletions(-)
tools/testing/selftests/clone3/clone3_selftests.h +2 -0
index e5a62dfef67a..c8899e773c8e 100644
@@ -29,6 +29,8 @@ struct clone_args {
 
 static pid_t sys_clone3(struct clone_args *args, size_t size)
 {
+	fflush(stdout);
+	fflush(stderr);
 	return syscall(__NR_clone3, args, size);
 }
 
tools/testing/selftests/clone3/clone3_set_tid.c +11 -4
index 3480e1c46983..e93369dcfe3b 100644
@@ -30,6 +30,13 @@
 static int pipe_1[2];
 static int pipe_2[2];
 
+static void child_exit(int ret)
+{
+	fflush(stdout);
+	fflush(stderr);
+	_exit(ret);
+}
+
 static int call_clone3_set_tid(pid_t *set_tid,
 			       size_t set_tid_size,
 			       int flags,
@@ -84,8 +91,8 @@ static int call_clone3_set_tid(pid_t *set_tid,
 		}
 
 		if (set_tid[0] != getpid())
-			_exit(EXIT_FAILURE);
-		_exit(exit_code);
+			child_exit(EXIT_FAILURE);
+		child_exit(exit_code);
 	}
 
 	if (expected_pid == 0 || expected_pid == pid) {
@@ -249,7 +256,7 @@ int main(int argc, char *argv[])
 	pid = fork();
 	if (pid == 0) {
 		ksft_print_msg("Child has PID %d\n", getpid());
-		_exit(EXIT_SUCCESS);
+		child_exit(EXIT_SUCCESS);
 	}
 	if (waitpid(pid, &status, 0) < 0)
 		ksft_exit_fail_msg("Waiting for child %d failed", pid);
@@ -309,7 +316,7 @@ int main(int argc, char *argv[])
 		 */
 		test_clone3_set_tid(set_tid, 3, CLONE_NEWPID, 0, 42, true);
 
-		_exit(ksft_cnt.ksft_pass);
+		child_exit(ksft_cnt.ksft_pass);
 	}
 
 	close(pipe_1[1]);
Signature · 1 line
2.23.0
#1 lore raw

PATCH 2/3 selftests/clone3: report a correct number of fails

In clone3_set_tid, a few test cases are running in a child process. And right now, if one of these test cases fails, the whole test will exit with the success status.

---
 tools/testing/selftests/clone3/clone3_set_tid.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
tools/testing/selftests/clone3/clone3_set_tid.c +3 -7
index e93369dcfe3b..9c19bae03661 100644
@@ -316,7 +316,7 @@ int main(int argc, char *argv[])
 		 */
 		test_clone3_set_tid(set_tid, 3, CLONE_NEWPID, 0, 42, true);
 
-		child_exit(ksft_cnt.ksft_pass);
+		child_exit(ksft_cnt.ksft_fail);
 	}
 
 	close(pipe_1[1]);
@@ -366,12 +366,8 @@ int main(int argc, char *argv[])
 	if (!WIFEXITED(status))
 		ksft_test_result_fail("Child error\n");
 
-	if (WEXITSTATUS(status))
-		/*
-		 * Update the number of total tests with the tests from the
-		 * child processes.
-		 */
-		ksft_cnt.ksft_pass = WEXITSTATUS(status);
+	ksft_cnt.ksft_pass += 4 - (ksft_cnt.ksft_fail - WEXITSTATUS(status));
+	ksft_cnt.ksft_fail = WEXITSTATUS(status);
 
 	if (ns3 == pid && ns2 == 42 && ns1 == 1)
 		ksft_test_result_pass(
Signature · 1 line
2.23.0
#3 lore raw

PATCH 3/3 selftests/clone3: check that all pids are released on error paths

In reply to Andrei Vagin

This is a regression test case for an issue when pids have not been released on error paths.

---
 tools/testing/selftests/clone3/clone3_set_tid.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
tools/testing/selftests/clone3/clone3_set_tid.c +14 -2
index 9c19bae03661..c6309f5d7d88 100644
@@ -160,7 +160,7 @@ int main(int argc, char *argv[])
 		ksft_exit_fail_msg("pipe() failed\n");
 
 	ksft_print_header();
-	ksft_set_plan(27);
+	ksft_set_plan(29);
 
 	f = fopen("/proc/sys/kernel/pid_max", "r");
 	if (f == NULL)
@@ -290,6 +290,18 @@ int main(int argc, char *argv[])
 	/* Let's create a PID 1 */
 	ns_pid = fork();
 	if (ns_pid == 0) {
+		/*
+		 * This and the next test cases check that all pid-s are
+		 * released on error paths.
+		 */
+		set_tid[0] = 43;
+		set_tid[1] = -1;
+		test_clone3_set_tid(set_tid, 2, 0, -EINVAL, 0, 0);
+
+		set_tid[0] = 43;
+		set_tid[1] = pid;
+		test_clone3_set_tid(set_tid, 2, 0, 0, 43, 0);
+
 		ksft_print_msg("Child in PID namespace has PID %d\n", getpid());
 		set_tid[0] = 2;
 		test_clone3_set_tid(set_tid, 1, 0, 0, 2, 0);
@@ -366,7 +378,7 @@ int main(int argc, char *argv[])
 	if (!WIFEXITED(status))
 		ksft_test_result_fail("Child error\n");
 
-	ksft_cnt.ksft_pass += 4 - (ksft_cnt.ksft_fail - WEXITSTATUS(status));
+	ksft_cnt.ksft_pass += 6 - (ksft_cnt.ksft_fail - WEXITSTATUS(status));
 	ksft_cnt.ksft_fail = WEXITSTATUS(status);
 
 	if (ns3 == pid && ns2 == 42 && ns1 == 1)
Signature · 1 line
2.23.0
#6 lore raw
Quoted 8 lines · Christian Brauner
Quoted 4 lines · Andrei Vagin

Buffers have to be flushed before clone3() to avoid double messages in the log.

Thanks, Andrei!

I pushed another small change on top of your changes which takes care to skip clone3() tests whenever the syscall is not supported:

https://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git/commit/?h=pidfd&id=11fde161ab37f2938504bf896b48afbd18ea71cd

Christian