J721e: Add USB support
cover J721e: Add USB support
Add USB support for J721e SoC.
First patch fixes a compile issue with Cadence USB driver. Rest of the patches add env, DT and configs related to USB.
Vignesh Raghavendra (4):
usb: cdns3: Fix include file path
environment: ti: Add DFU environment variables k3_dfu.h
arm: dts: k3-j721e: Add DT nodes for USB
configs: j721e_evm_a72_defconfig: Enable USB related configs
.../k3-j721e-common-proc-board-u-boot.dtsi | 14 ++++ arch/arm/dts/k3-j721e-common-proc-board.dts | 37 ++++++++++ arch/arm/dts/k3-j721e-main.dtsi | 70 +++++++++++++++++++ .../arm/dts/k3-j721e-r5-common-proc-board.dts | 7 ++ configs/j721e_evm_a72_defconfig | 28 ++++++++ drivers/usb/cdns3/core.c | 2 +- drivers/usb/cdns3/host.c | 2 +- include/configs/j721e_evm.h | 10 +++ include/environment/ti/k3_dfu.h | 46 ++++++++++++ 9 files changed, 214 insertions(+), 2 deletions(-) create mode 100644 include/environment/ti/k3_dfu.h
Signature · 1 line
2.24.0
PATCH 1/4 usb: cdns3: Fix include file path
xhci.h has now been moved to include/usb/ folder. Therefore, update the path in the Cadence USB drivers.
--- drivers/usb/cdns3/core.c | 2 +- drivers/usb/cdns3/host.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/usb/cdns3/core.c +1 -1
@@ -18,7 +18,7 @@#include <linux/kernel.h> #include <linux/io.h> #include <usb.h> -#include "../host/xhci.h" +#include <usb/xhci.h> #include "core.h" #include "host-export.h"
drivers/usb/cdns3/host.c +1 -1
@@ -11,7 +11,7 @@#include <dm.h> #include <linux/compat.h> #include <usb.h> -#include "../host/xhci.h" +#include <usb/xhci.h> #include "core.h" #include "drd.h"
Signature · 1 line
2.24.0
PATCH 1/4 usb: cdns3: Fix include file path
Quoted 1 line · Vignesh Raghavendra
xhci.hhas now been moved toinclude/usb/folder. Therefore, update the
s/folder/directory/ ; I can update it while applying.
Quoted 1 line
path in the Cadence USB drivers.
[...]
PATCH 1/4 usb: cdns3: Fix include file path
Hi Marek,
Quoted 4 lines · Marek Vasut
Quoted 1 line · Vignesh Raghavendra
xhci.hhas now been moved toinclude/usb/folder. Therefore, update thes/folder/directory/ ; I can update it while applying.
Agree, Thanks!
Quoted 5 lines
Quoted 2 lines
path in the Cadence USB drivers.
[...]
Signature · 2 lines
Regards Vignesh
PATCH 1/4 usb: cdns3: Fix include file path
In reply to Vignesh RaghavendraQuoted 4 lines · Vignesh Raghavendra
xhci.hhas now been moved toinclude/usb/folder. Therefore, update the path in the Cadence USB drivers.Signed-off-by Vignesh Raghavendra <[email protected]>
Fixed and applied. thanks.
PATCH 2/4 environment: ti: Add DFU environment variables k3_dfu.h
In reply to Vignesh RaghavendraSetup env variables for updating firmwares on eMMC/OSPI/MMC via DFU
--- include/configs/j721e_evm.h | 10 +++++++ include/environment/ti/k3_dfu.h | 46 +++++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+) create mode 100644 include/environment/ti/k3_dfu.h
include/configs/j721e_evm.h +10 -0
@@ -14,6 +14,7 @@#include <environment/ti/mmc.h> #include <environment/ti/k3_rproc.h> #include <environment/ti/ufs.h> +#include <environment/ti/k3_dfu.h> #define CONFIG_ENV_SIZE (128 << 10)
@@ -102,12 +103,21 @@"7 /lib/firmware/j7-c66_1-fw " \"8 /lib/firmware/j7-c71_0-fw " +/* set default dfu_bufsiz to 128KB (sector size of OSPI) */ +#define EXTRA_ENV_DFUARGS \ + "dfu_bufsiz=0x20000\0" \ + DFU_ALT_INFO_MMC \ + DFU_ALT_INFO_EMMC \ + DFU_ALT_INFO_RAM \ + DFU_ALT_INFO_OSPI +/* Incorporate settings into the U-Boot environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_MMC_TI_ARGS \ EXTRA_ENV_J721E_BOARD_SETTINGS \ EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \ EXTRA_ENV_RPROC_SETTINGS \ + EXTRA_ENV_DFUARGS \ DEFAULT_UFS_TI_ARGS/* Now for the remaining common defines */
include/environment/ti/k3_dfu.h new file +46 -0
46 lines not on this page · raw message
Signature · 1 line
2.24.0
PATCH 3/4 arm: dts: k3-j721e: Add DT nodes for USB
In reply to Vignesh RaghavendraJ721e has two instances of Cadence USB3 controller. Add DT nodes for the same. USB0 is configured to device mode and USB1 is configured to host mode. For now only high speed mode is supported.
--- .../k3-j721e-common-proc-board-u-boot.dtsi | 14 ++++ arch/arm/dts/k3-j721e-common-proc-board.dts | 37 ++++++++++ arch/arm/dts/k3-j721e-main.dtsi | 70 +++++++++++++++++++ .../arm/dts/k3-j721e-r5-common-proc-board.dts | 7 ++ 4 files changed, 128 insertions(+)
arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +14 -0
@@ -311,6 +311,20 @@ u-boot,dm-spl; }; +&main_usbss0_pins_default { + u-boot,dm-spl; +}; + +&usbss0 { + u-boot,dm-spl; + ti,usb2-only; +}; + +&usb0 { + dr_mode = "peripheral"; + u-boot,dm-spl; +}; + &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
arch/arm/dts/k3-j721e-common-proc-board.dts +37 -0
@@ -77,3 +77,40 @@ voltage-ranges = <1800 1800 3300 3300>; ti,driver-strength-ohm = <50>; }; + +&main_pmx0 { + main_usbss0_pins_default: main_usbss0_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ + >; + }; + + main_usbss1_pins_default: main_usbss1_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ + >; + }; +}; + +&usbss0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss0_pins_default>; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "super-speed"; +}; + +&usbss1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss1_pins_default>; + ti,usb2-only; +}; + +&usb1 { + dr_mode = "host"; + maximum-speed = "high-speed"; +};
arch/arm/dts/k3-j721e-main.dtsi +70 -0
76 lines not on this page · raw message
arch/arm/dts/k3-j721e-r5-common-proc-board.dts +7 -0
@@ -112,6 +112,13 @@ J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ >; }; + + main_usbss0_pins_default: main_usbss0_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ + >; + }; }; &wkup_uart0 {
Signature · 1 line
2.24.0
PATCH 4/4 configs: j721e_evm_a72_defconfig: Enable USB related configs
In reply to Vignesh RaghavendraEnable USB host and device related configs.
--- configs/j721e_evm_a72_defconfig | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
configs/j721e_evm_a72_defconfig +28 -0
@@ -29,6 +29,8 @@ CONFIG_SPL_DM_RESET=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_SPI_LOAD=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPT=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_ASKENV=y
@@ -37,6 +39,8 @@ CONFIG_CMD_MMC=y CONFIG_CMD_MTD=y CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_UFS=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y
@@ -60,8 +64,17 @@ CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CLK_TI_SCI=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_DMA_CHANNELS=y CONFIG_TI_K3_NAVSS_UDMA=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x82000000 +CONFIG_FASTBOOT_BUF_SIZE=0x2F000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_TI_SCI_PROTOCOL=y CONFIG_DM_MAILBOX=y CONFIG_K3_SEC_PROXY=y
@@ -91,6 +104,7 @@ CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_POWER_DOMAIN=y CONFIG_TI_SCI_POWER_DOMAIN=y +CONFIG_RAM=y CONFIG_REMOTEPROC_TI_K3_DSP=y CONFIG_REMOTEPROC_TI_K3_R5F=y CONFIG_DM_RESET=y
@@ -105,7 +119,21 @@ CONFIG_CADENCE_QSPI=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_SPL_DM_USB_GADGET=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_CDNS3=y +CONFIG_USB_CDNS3_GADGET=y +CONFIG_USB_CDNS3_HOST=y +CONFIG_SPL_USB_CDNS3_GADGET=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" +CONFIG_USB_GADGET_VENDOR_NUM=0x0451 +CONFIG_USB_GADGET_PRODUCT_NUM=0x6163 CONFIG_UFS=y CONFIG_CADENCE_UFS=y CONFIG_TI_J721E_UFS=y +CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.24.0
cover J721e: Add USB support
In reply to Vignesh RaghavendraQuoted 3 lines · Vignesh Raghavendra
Add USB support for J721e SoC.
First patch fixes a compile issue with Cadence USB driver. Rest of the patches add env, DT and configs related to USB.
patches 2,3,4 merged into u-boot-ti.
Thanks and regards,
Lokesh
Quoted 19 lines
Vignesh Raghavendra (4):
usb: cdns3: Fix include file path
environment: ti: Add DFU environment variablesk3_dfu.h
arm: dts: k3-j721e: Add DT nodes for USB
configs:j721e_evm_a72_defconfig: Enable USB related configs.../k3-j721e-common-proc-board-u-boot.dtsi | 14 ++++ arch/arm/dts/k3-j721e-common-proc-board.dts | 37 ++++++++++ arch/arm/dts/k3-j721e-main.dtsi | 70 +++++++++++++++++++ .../arm/dts/k3-j721e-r5-common-proc-board.dts | 7 ++ configs/j721e_evm_a72_defconfig | 28 ++++++++ drivers/usb/cdns3/core.c | 2 +- drivers/usb/cdns3/host.c | 2 +- include/configs/j721e_evm.h | 10 +++ include/environment/ti/k3_dfu.h | 46 ++++++++++++ 9 files changed, 214 insertions(+), 2 deletions(-) create mode 100644 include/environment/ti/k3_dfu.h