Skip to contentSkip to conversation

dt-bindings: power: Fix path to power-domain.txt bindings

PATCH In review Krzysztof Kozlowski 4 participants 5 messages Nov 19, 2019 – Nov 20, 2019

Subsystems (17)
lore
Share & tools
lore

Krzysztof Kozlowski

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: power: Fix path to power-domain.txt bindings

With split of power domain controller bindings to power-domain.yaml, the consumer part was renamed to power-domain.txt. Update the references in other bindings.

Fixes abb4805e343a ("dt-bindings: power: Convert Samsung Exynos Power Domain bindings to json-schema")
---
 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt  | 2 +-
 Documentation/devicetree/bindings/clock/exynos5433-clock.txt  | 2 +-
 .../devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt  | 2 +-
 .../devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt  | 2 +-
 .../bindings/clock/renesas,rcar-gen2-cpg-clocks.txt           | 2 +-
 .../devicetree/bindings/clock/renesas,rz-cpg-clocks.txt       | 2 +-
 .../devicetree/bindings/display/etnaviv/etnaviv-drm.txt       | 2 +-
 Documentation/devicetree/bindings/display/msm/dpu.txt         | 2 +-
 Documentation/devicetree/bindings/display/msm/mdp5.txt        | 2 +-
 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml            | 2 +-
 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt    | 2 +-
 .../devicetree/bindings/media/mediatek-jpeg-decoder.txt       | 2 +-
 Documentation/devicetree/bindings/media/mediatek-mdp.txt      | 2 +-
 Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt  | 2 +-
 Documentation/devicetree/bindings/pci/pci-keystone.txt        | 2 +-
 Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt | 2 +-
 Documentation/devicetree/bindings/power/qcom,rpmpd.txt        | 2 +-
 Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt | 2 +-
 .../devicetree/bindings/usb/nvidia,tegra124-xusb.txt          | 4 ++--
 19 files changed, 20 insertions(+), 20 deletions(-)
Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +1 -1
index 6030afb10b5c..e6c6b43e9770 100644
@@ -36,7 +36,7 @@ Required Properties:
 Optional Properties:
 
   - power-domains: a phandle to respective power domain node as described by
-    generic PM domain bindings (see power/power_domain.txt for more
+    generic PM domain bindings (see power/power-domain.txt for more
     information).
 
 The following is the list of clocks generated by the controller. Each clock is
Documentation/devicetree/bindings/clock/exynos5433-clock.txt +1 -1
index 183c327a7d6b..972d4e45f8c1 100644
@@ -178,7 +178,7 @@ Required Properties:
 
 Optional properties:
   - power-domains: a phandle to respective power domain node as described by
-	generic PM domain bindings (see power/power_domain.txt for more
+	generic PM domain bindings (see power/power-domain.txt for more
 	information).
 
 Each clock is assigned an identifier and client nodes can use this identifier
Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt +1 -1
index 7cc4c0330b53..46ecbbce277c 100644
@@ -17,7 +17,7 @@ Required Properties:
 SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
 through an MSTP clock should refer to the CPG device node in their
 "power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 
 Examples
Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt +1 -1
index 8c81547c29f5..cb32b4f41046 100644
@@ -19,7 +19,7 @@ Required Properties:
 SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
 through an MSTP clock should refer to the CPG device node in their
 "power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 
 Examples
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +1 -1
index f8c05bb4116e..58f9054704c2 100644
@@ -28,7 +28,7 @@ Required Properties:
 SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
 through an MSTP clock should refer to the CPG device node in their
 "power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 
 Examples
Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +1 -1
index 8ff3e2774ed8..9f32528e7245 100644
@@ -21,7 +21,7 @@ Required Properties:
 SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
 through an MSTP clock should refer to the CPG device node in their
 "power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 
 Examples
Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt +1 -1
index 640592e8ab2e..76d25d1499f7 100644
@@ -20,7 +20,7 @@ Required properties:
 
 Optional properties:
 - power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
+  Documentation/devicetree/bindings/power/power-domain.txt
 - #cooling-cells: : If used as a cooling device, must be <2>
 
 example:
Documentation/devicetree/bindings/display/msm/dpu.txt +1 -1
index a61dd40f3792..3ef875e94845 100644
@@ -13,7 +13,7 @@ Required properties:
 - reg-names: register region names. The following region is required:
   * "mdss"
 - power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
+  Documentation/devicetree/bindings/power/power-domain.txt
 - clocks: list of clock specifiers for clocks needed by the device.
 - clock-names: device clock names, must be in same order as clocks property.
   The following clocks are required:
Documentation/devicetree/bindings/display/msm/mdp5.txt +1 -1
index 4e11338548aa..1cce2a61cb8e 100644
@@ -19,7 +19,7 @@ Required properties:
 - #interrupt-cells: specifies the number of cells needed to encode an interrupt
   source, should be 1.
 - power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
+  Documentation/devicetree/bindings/power/power-domain.txt
 - clocks: device clocks. See ../clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required.
   * "iface"
Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +1 -1
index f04870d84542..e71cff583cf0 100644
@@ -36,7 +36,7 @@ properties:
   power-domains:
     description:
       List of phandle and PM domain specifier as documented in
-      Documentation/devicetree/bindings/power/power_domain.txt
+      Documentation/devicetree/bindings/power/power-domain.txt
     maxItems: 4
 
   mboxes:
Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt +1 -1
index 71fd74ed3ec8..0b2bbd64d18b 100644
@@ -17,7 +17,7 @@ Required properties:
 - clock-names   : must contain "pclk", "wrap" and "phy" entries, matching
                   entries in the clock property;
 - power-domains : a phandle to the power domain, see
-          Documentation/devicetree/bindings/power/power_domain.txt for details.
+          Documentation/devicetree/bindings/power/power-domain.txt for details.
 - reset-names   : should include following entry "mrst";
 - resets        : a list of phandle, should contain reset entry of
                   reset-names;
Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt +1 -1
index 044b11913c49..51f890c64004 100644
@@ -14,7 +14,7 @@ Required properties:
   Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: must contain "jpgdec-smi" and "jpgdec".
 - power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
+  Documentation/devicetree/bindings/power/power-domain.txt for details.
 - mediatek,larb: must contain the local arbiters in the current Socs, see
   Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
   for details.
Documentation/devicetree/bindings/media/mediatek-mdp.txt +1 -1
index 0d03e3ae2be2..988898f44bac 100644
@@ -17,7 +17,7 @@ Required properties (all function blocks, child node):
 - clocks: device clocks, see
   Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
+  Documentation/devicetree/bindings/power/power-domain.txt for details.
 
 Required properties (DMA function blocks, child node):
 - compatible: Should be one of
Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt +1 -1
index 4751029b9b74..de58cbee3dca 100644
@@ -27,7 +27,7 @@ In 'cpu' nodes:
 - power-domains: A phandle pointing to the PM domain specifier which provides
 		the performance states available for active state management.
 		Please refer to the power-domains bindings
-		Documentation/devicetree/bindings/power/power_domain.txt
+		Documentation/devicetree/bindings/power/power-domain.txt
 		and also examples below.
 - power-domain-names: Should be
 	- 'cpr' for qcs404.
Documentation/devicetree/bindings/pci/pci-keystone.txt +1 -1
index 47202a2938f2..4c592504bb69 100644
@@ -88,7 +88,7 @@ num-ob-windows: As specified in
 num-lanes: As specified in
 	   Documentation/devicetree/bindings/pci/designware-pcie.txt
 power-domains: As documented by the generic PM domain bindings in
-	       Documentation/devicetree/bindings/power/power_domain.txt.
+	       Documentation/devicetree/bindings/power/power-domain.txt.
 ti,syscon-pcie-mode: phandle to the device control module required to configure
 		      PCI in either RC mode or EP mode.
 
Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt +1 -1
index 64b286d2d398..3fff2c2e1500 100644
@@ -17,7 +17,7 @@ Required properties:
 		1 - PCIe0 Lane1
 		2 - ICSS2 SGMII Lane1
  - power-domains: As documented by the generic PM domain bindings in
-	Documentation/devicetree/bindings/power/power_domain.txt.
+	Documentation/devicetree/bindings/power/power-domain.txt.
  - clocks: List of clock-specifiers representing the input to the SERDES.
 	Should have 3 items representing the left input clock, external
 	reference clock and right input clock in that order.
Documentation/devicetree/bindings/power/qcom,rpmpd.txt +1 -1
index bc75bf49cdae..014be1448fab 100644
@@ -13,7 +13,7 @@ Required Properties:
  - #power-domain-cells: number of cells in Power domain specifier
 	must be 1.
  - operating-points-v2: Phandle to the OPP table for the Power domain.
-	Refer to Documentation/devicetree/bindings/power/power_domain.txt
+	Refer to Documentation/devicetree/bindings/power/power-domain.txt
 	and Documentation/devicetree/bindings/opp/opp.txt for more details
 
 Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for
Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +1 -1
index 712caa5726f7..442768f68b49 100644
@@ -44,7 +44,7 @@ Example:
 
 Devices residing in a power area must refer to that power area, as documented
 by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 Required properties:
   - power-domains: A phandle and symbolic PM domain specifier, as defined in
Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt +2 -2
index 5bfcc0b4d6b9..ac6b272c4bbf 100644
@@ -64,12 +64,12 @@ For Tegra210:
 For Tegra210 and Tegra186:
 - power-domains: A list of PM domain specifiers that reference each power-domain
   used by the xHCI controller. This list must comprise of a specifier for the
-  XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
+  XUSBA and XUSBC power-domains. See ../power/power-domain.txt and
   ../arm/tegra/nvidia,tegra20-pmc.txt for details.
 - power-domain-names: A list of names that represent each of the specifiers in
   the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
   represent the power-domains XUSBA and XUSBC, respectively. See
-  ../power/power_domain.txt for details.
+  ../power/power-domain.txt for details.
 
 Optional properties:
 --------------------
Signature · 1 line
2.17.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Krzysztof Kozlowski

With split of power domain controller bindings to power-domain.yaml, the consumer part was renamed to power-domain.txt. Update the references in other bindings.

Fixes abb4805e343a ("dt-bindings: power: Convert Samsung Exynos Power Domain bindings to json-schema")

Oh, I didn't noticed that the patch for conversion got queued up. From what tree?

And why was the file renamed to power-domain.txt?

Kind regards
Uffe

Quoted 278 lines
---
 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt  | 2 +-
 Documentation/devicetree/bindings/clock/exynos5433-clock.txt  | 2 +-
 .../devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt  | 2 +-
 .../devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt  | 2 +-
 .../bindings/clock/renesas,rcar-gen2-cpg-clocks.txt           | 2 +-
 .../devicetree/bindings/clock/renesas,rz-cpg-clocks.txt       | 2 +-
 .../devicetree/bindings/display/etnaviv/etnaviv-drm.txt       | 2 +-
 Documentation/devicetree/bindings/display/msm/dpu.txt         | 2 +-
 Documentation/devicetree/bindings/display/msm/mdp5.txt        | 2 +-
 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml            | 2 +-
 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt    | 2 +-
 .../devicetree/bindings/media/mediatek-jpeg-decoder.txt       | 2 +-
 Documentation/devicetree/bindings/media/mediatek-mdp.txt      | 2 +-
 Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt  | 2 +-
 Documentation/devicetree/bindings/pci/pci-keystone.txt        | 2 +-
 Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt | 2 +-
 Documentation/devicetree/bindings/power/qcom,rpmpd.txt        | 2 +-
 Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt | 2 +-
 .../devicetree/bindings/usb/nvidia,tegra124-xusb.txt          | 4 ++--
 19 files changed, 20 insertions(+), 20 deletions(-)
Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +1 -1
index 6030afb10b5c..e6c6b43e9770 100644
@@ -36,7 +36,7 @@ Required Properties:
 Optional Properties:
 
   - power-domains: a phandle to respective power domain node as described by
-    generic PM domain bindings (see power/power_domain.txt for more
+    generic PM domain bindings (see power/power-domain.txt for more
     information).
 
 The following is the list of clocks generated by the controller. Each clock is
Documentation/devicetree/bindings/clock/exynos5433-clock.txt +1 -1
index 183c327a7d6b..972d4e45f8c1 100644
@@ -178,7 +178,7 @@ Required Properties:
 
 Optional properties:
   - power-domains: a phandle to respective power domain node as described by
-       generic PM domain bindings (see power/power_domain.txt for more
+       generic PM domain bindings (see power/power-domain.txt for more
        information).
 
 Each clock is assigned an identifier and client nodes can use this identifier
Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt +1 -1
index 7cc4c0330b53..46ecbbce277c 100644
@@ -17,7 +17,7 @@ Required Properties:
 SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
 through an MSTP clock should refer to the CPG device node in their
 "power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 
 Examples
Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt +1 -1
index 8c81547c29f5..cb32b4f41046 100644
@@ -19,7 +19,7 @@ Required Properties:
 SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
 through an MSTP clock should refer to the CPG device node in their
 "power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 
 Examples
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +1 -1
index f8c05bb4116e..58f9054704c2 100644
@@ -28,7 +28,7 @@ Required Properties:
 SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
 through an MSTP clock should refer to the CPG device node in their
 "power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 
 Examples
Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +1 -1
index 8ff3e2774ed8..9f32528e7245 100644
@@ -21,7 +21,7 @@ Required Properties:
 SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
 through an MSTP clock should refer to the CPG device node in their
 "power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 
 Examples
Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt +1 -1
index 640592e8ab2e..76d25d1499f7 100644
@@ -20,7 +20,7 @@ Required properties:
 
 Optional properties:
 - power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
+  Documentation/devicetree/bindings/power/power-domain.txt
 - #cooling-cells: : If used as a cooling device, must be <2>
 
 example:
Documentation/devicetree/bindings/display/msm/dpu.txt +1 -1
index a61dd40f3792..3ef875e94845 100644
@@ -13,7 +13,7 @@ Required properties:
 - reg-names: register region names. The following region is required:
   * "mdss"
 - power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
+  Documentation/devicetree/bindings/power/power-domain.txt
 - clocks: list of clock specifiers for clocks needed by the device.
 - clock-names: device clock names, must be in same order as clocks property.
   The following clocks are required:
Documentation/devicetree/bindings/display/msm/mdp5.txt +1 -1
index 4e11338548aa..1cce2a61cb8e 100644
@@ -19,7 +19,7 @@ Required properties:
 - #interrupt-cells: specifies the number of cells needed to encode an interrupt
   source, should be 1.
 - power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
+  Documentation/devicetree/bindings/power/power-domain.txt
 - clocks: device clocks. See ../clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required.
   * "iface"
Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +1 -1
index f04870d84542..e71cff583cf0 100644
@@ -36,7 +36,7 @@ properties:
   power-domains:
     description:
       List of phandle and PM domain specifier as documented in
-      Documentation/devicetree/bindings/power/power_domain.txt
+      Documentation/devicetree/bindings/power/power-domain.txt
     maxItems: 4
 
   mboxes:
Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt +1 -1
index 71fd74ed3ec8..0b2bbd64d18b 100644
@@ -17,7 +17,7 @@ Required properties:
 - clock-names   : must contain "pclk", "wrap" and "phy" entries, matching
                   entries in the clock property;
 - power-domains : a phandle to the power domain, see
-          Documentation/devicetree/bindings/power/power_domain.txt for details.
+          Documentation/devicetree/bindings/power/power-domain.txt for details.
 - reset-names   : should include following entry "mrst";
 - resets        : a list of phandle, should contain reset entry of
                   reset-names;
Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt +1 -1
index 044b11913c49..51f890c64004 100644
@@ -14,7 +14,7 @@ Required properties:
   Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: must contain "jpgdec-smi" and "jpgdec".
 - power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
+  Documentation/devicetree/bindings/power/power-domain.txt for details.
 - mediatek,larb: must contain the local arbiters in the current Socs, see
   Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
   for details.
Documentation/devicetree/bindings/media/mediatek-mdp.txt +1 -1
index 0d03e3ae2be2..988898f44bac 100644
@@ -17,7 +17,7 @@ Required properties (all function blocks, child node):
 - clocks: device clocks, see
   Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
+  Documentation/devicetree/bindings/power/power-domain.txt for details.
 
 Required properties (DMA function blocks, child node):
 - compatible: Should be one of
Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt +1 -1
index 4751029b9b74..de58cbee3dca 100644
@@ -27,7 +27,7 @@ In 'cpu' nodes:
 - power-domains: A phandle pointing to the PM domain specifier which provides
                the performance states available for active state management.
                Please refer to the power-domains bindings
-               Documentation/devicetree/bindings/power/power_domain.txt
+               Documentation/devicetree/bindings/power/power-domain.txt
                and also examples below.
 - power-domain-names: Should be
        - 'cpr' for qcs404.
Documentation/devicetree/bindings/pci/pci-keystone.txt +1 -1
index 47202a2938f2..4c592504bb69 100644
@@ -88,7 +88,7 @@ num-ob-windows: As specified in
 num-lanes: As specified in
           Documentation/devicetree/bindings/pci/designware-pcie.txt
 power-domains: As documented by the generic PM domain bindings in
-              Documentation/devicetree/bindings/power/power_domain.txt.
+              Documentation/devicetree/bindings/power/power-domain.txt.
 ti,syscon-pcie-mode: phandle to the device control module required to configure
                      PCI in either RC mode or EP mode.
 
Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt +1 -1
index 64b286d2d398..3fff2c2e1500 100644
@@ -17,7 +17,7 @@ Required properties:
                1 - PCIe0 Lane1
                2 - ICSS2 SGMII Lane1
  - power-domains: As documented by the generic PM domain bindings in
-       Documentation/devicetree/bindings/power/power_domain.txt.
+       Documentation/devicetree/bindings/power/power-domain.txt.
  - clocks: List of clock-specifiers representing the input to the SERDES.
        Should have 3 items representing the left input clock, external
        reference clock and right input clock in that order.
Documentation/devicetree/bindings/power/qcom,rpmpd.txt +1 -1
index bc75bf49cdae..014be1448fab 100644
@@ -13,7 +13,7 @@ Required Properties:
  - #power-domain-cells: number of cells in Power domain specifier
        must be 1.
  - operating-points-v2: Phandle to the OPP table for the Power domain.
-       Refer to Documentation/devicetree/bindings/power/power_domain.txt
+       Refer to Documentation/devicetree/bindings/power/power-domain.txt
        and Documentation/devicetree/bindings/opp/opp.txt for more details
 
 Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for
Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +1 -1
index 712caa5726f7..442768f68b49 100644
@@ -44,7 +44,7 @@ Example:
 
 Devices residing in a power area must refer to that power area, as documented
 by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
+Documentation/devicetree/bindings/power/power-domain.txt.
 
 Required properties:
   - power-domains: A phandle and symbolic PM domain specifier, as defined in
Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt +2 -3
index 5bfcc0b4d6b9..ac6b272c4bbf 100644
@@ -64,12 +64,12 @@ For Tegra210:
 For Tegra210 and Tegra186:
 - power-domains: A list of PM domain specifiers that reference each power-domain
   used by the xHCI controller. This list must comprise of a specifier for the
-  XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
+  XUSBA and XUSBC power-domains. See ../power/power-domain.txt and
   ../arm/tegra/nvidia,tegra20-pmc.txt for details.
 - power-domain-names: A list of names that represent each of the specifiers in
   the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
   represent the power-domains XUSBA and XUSBC, respectively. See
-  ../power/power_domain.txt for details.
+  ../power/power-domain.txt for details.
 
 Optional properties:
 --------------------
--

2.17.1

Reviewed-by on v1 1/1
#2 lore raw
In reply to Krzysztof Kozlowski

Hi Krzysztof,

Quoted 7 lines · Krzysztof Kozlowski

With split of power domain controller bindings to power-domain.yaml, the consumer part was renamed to power-domain.txt. Update the references in other bindings.

Fixes abb4805e343a ("dt-bindings: power: Convert Samsung Exynos Power Domain bindings to json-schema")

Thanks for your patch!

Quoted 1 line
 .../bindings/clock/renesas,rcar-gen2-cpg-clocks.txt           | 2 +-

Please note this file is no longer present in next. But robh/for-next still has it.

Gr{oetje,eeting}s,

Geert

Signature · 9 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno
maintainer
#3 lore raw
In reply to Krzysztof Kozlowski
Quoted 21 lines · Krzysztof Kozlowski

With split of power domain controller bindings to power-domain.yaml, the consumer part was renamed to power-domain.txt. Update the references in other bindings.

Fixes abb4805e343a ("dt-bindings: power: Convert Samsung Exynos Power Domain bindings to json-schema")
---
 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt  | 2 +-
 Documentation/devicetree/bindings/clock/exynos5433-clock.txt  | 2 +-
 .../devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt  | 2 +-
 .../devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt  | 2 +-
 .../bindings/clock/renesas,rcar-gen2-cpg-clocks.txt           | 2 +-
 .../devicetree/bindings/clock/renesas,rz-cpg-clocks.txt       | 2 +-
 .../devicetree/bindings/display/etnaviv/etnaviv-drm.txt       | 2 +-
 Documentation/devicetree/bindings/display/msm/dpu.txt         | 2 +-
 Documentation/devicetree/bindings/display/msm/mdp5.txt        | 2 +-
 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml            | 2 +-
 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt    | 2 +-
 .../devicetree/bindings/media/mediatek-jpeg-decoder.txt       | 2 +-
Quoted 8 lines
 Documentation/devicetree/bindings/media/mediatek-mdp.txt      | 2 +-
 Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt  | 2 +-
 Documentation/devicetree/bindings/pci/pci-keystone.txt        | 2 +-
 Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt | 2 +-
 Documentation/devicetree/bindings/power/qcom,rpmpd.txt        | 2 +-
 Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt | 2 +-
 .../devicetree/bindings/usb/nvidia,tegra124-xusb.txt          | 4 ++--
 19 files changed, 20 insertions(+), 20 deletions(-)

Please no. Can you just undo the renaming back to power_domain.txt

Rob
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

author maintainer
#4 lore raw
Quoted 32 lines · Rob Herring
Quoted 21 lines · Krzysztof Kozlowski

With split of power domain controller bindings to power-domain.yaml, the consumer part was renamed to power-domain.txt. Update the references in other bindings.

Fixes abb4805e343a ("dt-bindings: power: Convert Samsung Exynos Power Domain bindings to json-schema")
---
 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt  | 2 +-
 Documentation/devicetree/bindings/clock/exynos5433-clock.txt  | 2 +-
 .../devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt  | 2 +-
 .../devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt  | 2 +-
 .../bindings/clock/renesas,rcar-gen2-cpg-clocks.txt           | 2 +-
 .../devicetree/bindings/clock/renesas,rz-cpg-clocks.txt       | 2 +-
 .../devicetree/bindings/display/etnaviv/etnaviv-drm.txt       | 2 +-
 Documentation/devicetree/bindings/display/msm/dpu.txt         | 2 +-
 Documentation/devicetree/bindings/display/msm/mdp5.txt        | 2 +-
 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml            | 2 +-
 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt    | 2 +-
 .../devicetree/bindings/media/mediatek-jpeg-decoder.txt       | 2 +-
Quoted 8 lines
 Documentation/devicetree/bindings/media/mediatek-mdp.txt      | 2 +-
 Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt  | 2 +-
 Documentation/devicetree/bindings/pci/pci-keystone.txt        | 2 +-
 Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt | 2 +-
 Documentation/devicetree/bindings/power/qcom,rpmpd.txt        | 2 +-
 Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt | 2 +-
 .../devicetree/bindings/usb/nvidia,tegra124-xusb.txt          | 4 ++--
 19 files changed, 20 insertions(+), 20 deletions(-)
Quoted 1 line

Please no. Can you just undo the renaming back to power_domain.txt

The renaming was done to make it consistent with yaml and other bindings but indeed it creates some churn... I'll send rename-undo then.

Best regards,
Krzysztof
_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno