dt-bindings: net: Add compatible for BCM4335A0 bluetooth
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH v2 1/2 dt-bindings: net: Add compatible for BCM4335A0 bluetooth
Available in the Ampak AP6335 WiFi/Bluetooth combo
--- Documentation/devicetree/bindings/net/broadcom-bluetooth.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +1 -0
@@ -15,6 +15,7 @@ Required properties: * "brcm,bcm43438-bt" * "brcm,bcm4345c5" * "brcm,bcm43540-bt" + * "brcm,bcm4335a0" Optional properties:
Signature · 1 line
2.17.1
Marcel Holtmann
maintainerHi Mohammad,
Quoted 6 lines
Available in the Ampak AP6335 WiFi/Bluetooth combo
Signed-off-by Mohammad Rasim <[email protected]>---
Documentation/devicetree/bindings/net/broadcom-bluetooth.txt| 1 +1 file changed, 1 insertion(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel
PATCH v2 2/2 Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth
In reply to a message not in the archiveThis patch adds the device ID for the BCM4335A0 module (part of the AMPAK AP6335 WIFI/Bluetooth combo)
hciconfig output:
```
hci1: Type: Primary Bus: UART
BD Address: 43:35:B0:07:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:5079 acl:0 sco:0 events:567 errors:0
TX bytes:69065 acl:0 sco:0 commands:567 errors:0
Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: SLAVE ACCEPT
Name: 'alarm'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Version: 4.0 (0x6) Revision: 0x161
LMP Version: 4.0 (0x6) Subversion: 0x4106
Manufacturer: Broadcom Corporation (15)
```--- drivers/bluetooth/btbcm.c | 1 + drivers/bluetooth/hci_bcm.c | 1 + 2 files changed, 2 insertions(+)
drivers/bluetooth/btbcm.c +1 -0
@@ -342,6 +342,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = { { 0x220e, "BCM20702A1" }, /* 001.002.014 */ { 0x4217, "BCM4329B1" }, /* 002.002.023 */ { 0x6106, "BCM4359C0" }, /* 003.001.006 */ + { 0x4106, "BCM4335A0" }, /* 002.001.006 */ { } };
drivers/bluetooth/hci_bcm.c +1 -0
@@ -1425,6 +1425,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = { { .compatible = "brcm,bcm4330-bt" }, { .compatible = "brcm,bcm43438-bt" }, { .compatible = "brcm,bcm43540-bt" }, + { .compatible = "brcm,bcm4335a0" }, { }, };MODULE_DEVICE_TABLE (of, bcm_bluetooth_of_match);
Signature · 1 line
2.17.1
Marcel Holtmann
maintainerRe: [PATCH v2 2/2] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth
Hi Mohammad,
Quoted 23 lines
This patch adds the device ID for the BCM4335A0 module (part of the AMPAK AP6335 WIFI/Bluetooth combo)
hciconfig output:
``` hci1: Type: Primary Bus: UART BD Address: 43:35:B0:07:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:5079 acl:0 sco:0 events:567 errors:0 TX bytes:69065 acl:0 sco:0 commands:567 errors:0 Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'alarm' Class: 0x000000 Service Classes: Unspecified Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x161 LMP Version: 4.0 (0x6) Subversion: 0x4106 Manufacturer: Broadcom Corporation (15) ```
Quoted 5 lines
Signed-off-by Mohammad Rasim <[email protected]>---
drivers/bluetooth/btbcm.c| 1 +drivers/bluetooth/hci_bcm.c| 1 +2 files changed, 2 insertions(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel