video: Fix Kconfig indentation
Subsystems (3)
PATCH 1/1 video: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
--- drivers/video/backlight/Kconfig | 8 ++-- drivers/video/console/Kconfig | 76 ++++++++++++++++----------------- 2 files changed, 42 insertions(+), 42 deletions(-)
drivers/video/backlight/Kconfig +4 -4
@@ -9,7 +9,7 @@ menu "Backlight & LCD device support" # LCD # config LCD_CLASS_DEVICE - tristate "Lowlevel LCD controls" + tristate "Lowlevel LCD controls" help This framework adds support for low-level control of LCD. Some framebuffer devices connect to platform-specific LCD modules
@@ -141,10 +141,10 @@ endif # LCD_CLASS_DEVICE # Backlight # config BACKLIGHT_CLASS_DEVICE - tristate "Lowlevel Backlight controls" + tristate "Lowlevel Backlight controls" help This framework adds support for low-level control of the LCD - backlight. This includes support for brightness and power. + backlight. This includes support for brightness and power. To have support for your specific LCD panel you will have to select the proper drivers which depend on this option.
@@ -272,7 +272,7 @@ config BACKLIGHT_APPLE tristate "Apple Backlight Driver" depends on X86 && ACPI help - If you have an Intel-based Apple say Y to enable a driver for its + If you have an Intel-based Apple say Y to enable a driver for its backlight. config BACKLIGHT_TOSA
drivers/video/console/Kconfig +38 -38
117 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 5 lines · Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:
$ sed -e 's/^ /\t/' -i */KconfigSigned-off-by Krzysztof Kozlowski <[email protected]>
No particular objections but I wonder if this would be better sent to [email protected] .
Daniel.
Quoted 170 lines
--- drivers/video/backlight/Kconfig | 8 ++-- drivers/video/console/Kconfig | 76 ++++++++++++++++----------------- 2 files changed, 42 insertions(+), 42 deletions(-)drivers/video/backlight/Kconfig +4
-4@@ -9,7 +9,7 @@ menu "Backlight & LCD device support" # LCD # config LCD_CLASS_DEVICE - tristate "Lowlevel LCD controls" + tristate "Lowlevel LCD controls" help This framework adds support for low-level control of LCD. Some framebuffer devices connect to platform-specific LCD modules@@ -141,10 +141,10 @@ endif # LCD_CLASS_DEVICE # Backlight # config BACKLIGHT_CLASS_DEVICE - tristate "Lowlevel Backlight controls" + tristate "Lowlevel Backlight controls" help This framework adds support for low-level control of the LCD - backlight. This includes support for brightness and power. + backlight. This includes support for brightness and power. To have support for your specific LCD panel you will have to select the proper drivers which depend on this option.@@ -272,7 +272,7 @@ config BACKLIGHT_APPLE tristate "Apple Backlight Driver" depends on X86 && ACPI help - If you have an Intel-based Apple say Y to enable a driver for its + If you have an Intel-based Apple say Y to enable a driver for its backlight. config BACKLIGHT_TOSAdrivers/video/console/Kconfig +38
-38@@ -27,7 +27,7 @@ config VGACON_SOFT_SCROLLBACK depends on VGA_CONSOLE default n help - The scrollback buffer of the standard VGA console is located in + The scrollback buffer of the standard VGA console is located in the VGA RAM. The size of this RAM is fixed and is quite small. If you require a larger scrollback buffer, this can be placed in System RAM which is dynamically allocated during initialization.@@ -84,12 +84,12 @@ config MDA_CONSOLE If unsure, say N. config SGI_NEWPORT_CONSOLE - tristate "SGI Newport Console support" + tristate "SGI Newport Console support" depends on SGI_IP22 && HAS_IOMEM - select FONT_SUPPORT - help - Say Y here if you want the console on the Newport aka XL graphics - card of your Indy. Most people say Y here. + select FONT_SUPPORT + help + Say Y here if you want the console on the Newport aka XL graphics + card of your Indy. Most people say Y here. config DUMMY_CONSOLE bool@@ -97,24 +97,24 @@ config DUMMY_CONSOLE default y config DUMMY_CONSOLE_COLUMNS - int "Initial number of console screen columns" - depends on DUMMY_CONSOLE && !ARM - default 160 if PARISC - default 80 - help - On PA-RISC, the default value is 160, which should fit a 1280x1024 - monitor. - Select 80 if you use a 640x480 resolution by default. + int "Initial number of console screen columns" + depends on DUMMY_CONSOLE && !ARM + default 160 if PARISC + default 80 + help + On PA-RISC, the default value is 160, which should fit a 1280x1024 + monitor. + Select 80 if you use a 640x480 resolution by default. config DUMMY_CONSOLE_ROWS - int "Initial number of console screen rows" - depends on DUMMY_CONSOLE && !ARM - default 64 if PARISC - default 25 - help - On PA-RISC, the default value is 64, which should fit a 1280x1024 - monitor. - Select 25 if you use a 640x480 resolution by default. + int "Initial number of console screen rows" + depends on DUMMY_CONSOLE && !ARM + default 64 if PARISC + default 25 + help + On PA-RISC, the default value is 64, which should fit a 1280x1024 + monitor. + Select 25 if you use a 640x480 resolution by default. config FRAMEBUFFER_CONSOLE bool "Framebuffer Console support"@@ -130,11 +130,11 @@ config FRAMEBUFFER_CONSOLE_DETECT_PRIMARY depends on FRAMEBUFFER_CONSOLE default n ---help--- - If this option is selected, the framebuffer console will - automatically select the primary display device (if the architecture + If this option is selected, the framebuffer console will + automatically select the primary display device (if the architecture supports this feature). Otherwise, the framebuffer console will - always select the first framebuffer driver that is loaded. The latter - is the default behavior. + always select the first framebuffer driver that is loaded. The latter + is the default behavior. You can always override the automatic selection of the primary device by using the fbcon=map: boot option.@@ -145,11 +145,11 @@ config FRAMEBUFFER_CONSOLE_ROTATION bool "Framebuffer Console Rotation" depends on FRAMEBUFFER_CONSOLE help - Enable display rotation for the framebuffer console. This is done - in software and may be significantly slower than a normally oriented - display. Note that the rotation is done at the console level only - such that other users of the framebuffer will remain normally - oriented. + Enable display rotation for the framebuffer console. This is done + in software and may be significantly slower than a normally oriented + display. Note that the rotation is done at the console level only + such that other users of the framebuffer will remain normally + oriented. config FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER bool "Framebuffer Console Deferred Takeover"@@ -163,14 +163,14 @@ config FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER black screen as soon as fbcon loads. config STI_CONSOLE - bool "STI text console" + bool "STI text console" depends on PARISC && HAS_IOMEM - select FONT_SUPPORT - default y - help - The STI console is the builtin display/keyboard on HP-PARISC - machines. Say Y here to build support for it into your kernel. - The alternative is to use your primary serial port as a console. + select FONT_SUPPORT + default y + help + The STI console is the builtin display/keyboard on HP-PARISC + machines. Say Y here to build support for it into your kernel. + The alternative is to use your primary serial port as a console. endmenuSignature · 1 line
2.17.1
Quoted 9 lines · Daniel Thompson
Quoted 5 lines · Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:
$ sed -e 's/^ /\t/' -i */KconfigSigned-off-by Krzysztof Kozlowski <[email protected]>No particular objections but I wonder if this would be better sent to [email protected] .
Thanks for feedback.
I sent to trivial and kernel-janitors my previous version of this patchset which was not split per-subsystem and there was no feedback. Few other patches already came through maintainers. If there will be no reply, I'll send next version through trivial.
Best regards,
Krzysztof
Bartlomiej Zolnierkiewicz
Acked-by[ added Jiri to Cc: ]
Quoted 11 lines · Krzysztof Kozlowski
Quoted 9 lines · Daniel Thompson
Quoted 5 lines · Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:
$ sed -e 's/^ /\t/' -i */KconfigSigned-off-by Krzysztof Kozlowski <[email protected]>No particular objections but I wonder if this would be better sent to [email protected] .
Quoted 6 lines
Thanks for feedback.
I sent to trivial and kernel-janitors my previous version of this patchset which was not split per-subsystem and there was no feedback. Few other patches already came through maintainers. If there will be no reply, I'll send next version through trivial.
If anyone wants to merge it through backlight or trivial tree:
Otherwise I'll queue this through drm-misc tree for v5.6.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics