Skip to contentSkip to conversation

J721e HS device support

PATCH New Andrew F. Davis 2 participants 11 messages Nov 20, 2019 – Jan 10, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover J721e HS device support

Hello all,

This series brings up High-Security (HS) device support on the J721e platform. Support for this K3 HS device is much like the existing AM65x HS and this series leverages much of that support.

There are also a couple tangentially related fixups that I noticed while adding this support and testing. Although not strictly needed they do allow J721e HS to just work out-of-box by the time the last patch adds the defconfigs.

Thanks,
Andrew

Andrew F. Davis (6):
configs: j721e_evm.h: Sync J721e environment configuration with AM65x
configs: ti: Factor out call to 'args_mmc' into MMC common environment
arm: K3: Fix header comment match AM6 specific file function
arm: K3: Disable ROM configured firewalls
arm: K3: Increase default SYSFW image size allocation
configs: Add configs for J721e High Security EVM

 arch/arm/mach-k3/Kconfig           |   2 +-
 arch/arm/mach-k3/am6_init.c        |  28 +++++++-
 arch/arm/mach-k3/common.c          |  30 ++++++++
 arch/arm/mach-k3/common.h          |   7 ++
 arch/arm/mach-k3/j721e_init.c      |  52 ++++++++++++++
 configs/j721e_hs_evm_a72_defconfig | 106 +++++++++++++++++++++++++++++
 configs/j721e_hs_evm_r5_defconfig  | 102 +++++++++++++++++++++++++++
 include/configs/j721e_evm.h        |  16 ++++-
 include/configs/ti_armv7_common.h  |   1 -
 include/environment/ti/mmc.h       |   5 +-
 10 files changed, 341 insertions(+), 8 deletions(-)
 create mode 100644 configs/j721e_hs_evm_a72_defconfig
 create mode 100644 configs/j721e_hs_evm_r5_defconfig
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/6 configs: j721e_evm.h: Sync J721e environment configuration with AM65x

Some of the environment configuration in AM65x is not available in J721e due to additions on one but not the other. These two platforms are similar enough these common definitions should be factored out to a common area, prepare for this by synchronizing them.

---
 include/configs/j721e_evm.h | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
include/configs/j721e_evm.h +13 -3
index 639d87a4e5..2af68aad94 100644
@@ -60,10 +60,16 @@
 /* HyperFlash related configuration */
 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
 
+#define PARTS_DEFAULT \
+	/* Linux partitions */ \
+	"name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
+
 /* U-Boot general configuration */
 #define EXTRA_ENV_J721E_BOARD_SETTINGS					\
 	"default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"	\
-	"findfdt=setenv fdtfile ${default_device_tree}\0"		\
+	"findfdt="							\
+		"setenv name_fdt ${default_device_tree};"		\
+		"setenv fdtfile ${name_fdt}\0"				\
 	"loadaddr=0x80080000\0"						\
 	"fdtaddr=0x82000000\0"						\
 	"overlayaddr=0x83000000\0"					\
@@ -80,7 +86,7 @@
 	"bootdir=/boot\0"						\
 	"rd_spec=-\0"							\
 	"init_mmc=run args_all args_mmc\0"				\
-	"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+	"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
 	"get_overlay_mmc="						\
 		"fdt address ${fdtaddr};"				\
 		"fdt resize 0x100000;"					\
@@ -90,7 +96,10 @@
 		"fdt apply ${overlayaddr};"				\
 		"done;\0"						\
 	"get_kern_mmc=load mmc ${bootpart} ${loadaddr} "		\
-		"${bootdir}/${name_kern}\0"
+		"${bootdir}/${name_kern}\0"				\
+	"get_fit_mmc=load mmc ${bootpart} ${addr_fit} "			\
+		"${bootdir}/${name_fit}\0"				\
+	"partitions=" PARTS_DEFAULT
 
 #ifdef DEFAULT_RPROCS
 #undef DEFAULT_RPROCS
@@ -105,6 +114,7 @@
 /* Incorporate settings into the U-Boot environment */
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	DEFAULT_MMC_TI_ARGS						\
+	DEFAULT_FIT_TI_ARGS						\
 	EXTRA_ENV_J721E_BOARD_SETTINGS					\
 	EXTRA_ENV_J721E_BOARD_SETTINGS_MMC				\
 	EXTRA_ENV_RPROC_SETTINGS					\
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/6 configs: ti: Factor out call to 'args_mmc' into MMC common environment

In reply to Andrew F. Davis

Both 'loadfit' and 'mmcloados' start with a call to 'args_mmc' so this can be factored out to before eithers only call site. This also allows us to remove that call from 'loadfit', which should not have been calling it anyway as that command should not be MMC specific. Without the call to 'args_mmc' the command 'loadfit' becomes just a call to 'run_fit' so remove the indirection and call 'run_fit' directly, this removes the need for 'loadfit' command (which was misnamed anyway). Drop it.

---
 include/configs/ti_armv7_common.h | 1 -
 include/environment/ti/mmc.h      | 5 +++--
 2 files changed, 3 insertions(+), 3 deletions(-)
include/configs/ti_armv7_common.h +0 -1
index 6d15304a65..2ec1dea26e 100644
@@ -61,7 +61,6 @@
 		"setenv overlaystring ${overlaystring}'#'${overlay};" \
 		"done;\0" \
 	"run_fit=bootm ${addr_fit}#${fdtfile}${overlaystring}\0" \
-	"loadfit=run args_mmc; run run_fit;\0" \
 
 /*
  * DDR information.  If the CONFIG_NR_DRAM_BANKS is not defined,
include/environment/ti/mmc.h +3 -2
index bb4af0a3d5..1c8e49a8b3 100644
@@ -41,7 +41,7 @@
 				"fi;" \
 			"fi;" \
 		"fi;\0" \
-	"mmcloados=run args_mmc; " \
+	"mmcloados=" \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
 				"bootz ${loadaddr} - ${fdtaddr}; " \
@@ -61,8 +61,9 @@
 		"if mmc rescan; then " \
 			"echo SD/MMC found on device ${mmcdev};" \
 			"if run loadimage; then " \
+				"run args_mmc; " \
 				"if test ${boot_fit} -eq 1; then " \
-					"run loadfit; " \
+					"run run_fit; " \
 				"else " \
 					"run mmcloados;" \
 				"fi;" \
Signature · 1 line
2.17.1
#3 lore raw

PATCH 3/6 arm: K3: Fix header comment match AM6 specific file function

In reply to Andrew F. Davis

This file used to be the common location for K3 init when AM6 was the only device, but common code was moved to common.c and this file became AM6 specific, correct this header text.

---
 arch/arm/mach-k3/am6_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-k3/am6_init.c +1 -1
index 99edcd9a24..58ea9ba179 100644
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * K3: Architecture initialization
+ * AM6: SoC specific initialization
  *
  * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
  *	Lokesh Vutla <[email protected]>
Signature · 1 line
2.17.1
#4 lore raw

PATCH 4/6 arm: K3: Disable ROM configured firewalls

In reply to Andrew F. Davis

ROM configures certain firewalls based on its usage, which includes the one in front of boot peripherals. In specific case of boot peripherals, ROM does not open up the full address space corresponding to the peripherals. Like in OSPI, ROM only configures the firewall region for 32 bit address space and mark 64bit address space flash regions as in-accessible.

When security-cfg is initialized by sysfw, all the non-configured firewalls are kept in bypass state using a global setting. Since ROM configured firewalls for certain peripherals, these will not be touched. So when bootloader touches any of the address space that ROM marked as in-accessible, system raises a firewall exception causing boot hang.

It would have been ideal if sysfw cleans up the ROM configured boot peripheral firewalls. Given the memory overhead to store this information provided by ROM and the boot time increase in re configuring the firewalls, it is concluded to clean this up in bootloaders.

So disable all the firewalls that ROM doesn't open up the full address space.

---
 arch/arm/mach-k3/am6_init.c   | 26 ++++++++++++++++++
 arch/arm/mach-k3/common.c     | 30 ++++++++++++++++++++
 arch/arm/mach-k3/common.h     |  7 +++++
 arch/arm/mach-k3/j721e_init.c | 52 +++++++++++++++++++++++++++++++++++
 4 files changed, 115 insertions(+)
arch/arm/mach-k3/am6_init.c +26 -0
index 58ea9ba179..d924fa0422 100644
@@ -19,6 +19,26 @@
 #include <linux/soc/ti/ti_sci_protocol.h>
 
 #ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_K3_LOAD_SYSFW
+#ifdef CONFIG_TI_SECURE_DEVICE
+struct fwl_data main_cbass_fwls[] = {
+	{ "MMCSD1_CFG", 2057, 1 },
+	{ "MMCSD0_CFG", 2058, 1 },
+	{ "USB3SS0_SLV0", 2176, 2 },
+	{ "PCIE0_SLV", 2336, 8 },
+	{ "PCIE1_SLV", 2337, 8 },
+	{ "PCIE0_CFG", 2688, 1 },
+	{ "PCIE1_CFG", 2689, 1 },
+}, mcu_cbass_fwls[] = {
+	{ "MCU_ARMSS0_CORE0_SLV", 1024, 1 },
+	{ "MCU_ARMSS0_CORE1_SLV", 1028, 1 },
+	{ "MCU_FSS0_S1", 1033, 8 },
+	{ "MCU_FSS0_S0", 1036, 8 },
+	{ "MCU_CPSW0", 1220, 1 },
+};
+#endif
+#endif
+
 static void mmr_unlock(u32 base, u32 partition)
 {
 	/* Translate the base address */
@@ -108,6 +128,12 @@ void board_init_f(ulong dummy)
 	 * output.
 	 */
 	k3_sysfw_loader(preloader_console_init);
+
+	/* Disable ROM configured firewalls right after loading sysfw */
+#ifdef CONFIG_TI_SECURE_DEVICE
+	remove_fwl_configs(main_cbass_fwls, ARRAY_SIZE(main_cbass_fwls));
+	remove_fwl_configs(mcu_cbass_fwls, ARRAY_SIZE(mcu_cbass_fwls));
+#endif
 #else
 	/* Prepare console output */
 	preloader_console_init();
arch/arm/mach-k3/common.c +30 -0
index bf631b74f8..8b85890763 100644
@@ -244,3 +244,33 @@ void board_prep_linux(bootm_headers_t *images)
 				       CONFIG_SYS_CACHELINE_SIZE));
 }
 #endif
+
+void remove_fwl_configs(struct fwl_data *fwl_data, size_t fwl_data_size)
+{
+	struct ti_sci_msg_fwl_region region;
+	struct ti_sci_fwl_ops *fwl_ops;
+	struct ti_sci_handle *ti_sci;
+	size_t i, j;
+
+	ti_sci = get_ti_sci_handle();
+	fwl_ops = &ti_sci->ops.fwl_ops;
+	for (i = 0; i < fwl_data_size; i++) {
+		for (j = 0; j <  fwl_data[i].regions; j++) {
+			region.fwl_id = fwl_data[i].fwl_id;
+			region.region = j;
+			region.n_permission_regs = 3;
+
+			fwl_ops->get_fwl_region(ti_sci, &region);
+
+			if (region.control != 0) {
+				pr_debug("Attempting to disable firewall %5d (%25s)\n",
+					 region.fwl_id, fwl_data[i].name);
+				region.control = 0;
+
+				if (fwl_ops->set_fwl_region(ti_sci, &region))
+					pr_err("Could not disable firewall %5d (%25s)\n",
+					       region.fwl_id, fwl_data[i].name);
+			}
+		}
+	}
+}
arch/arm/mach-k3/common.h +7 -0
index 8f9a023921..10701123dd 100644
@@ -14,5 +14,12 @@
 #define REV_PG1_0	0
 #define REV_PG2_0	1
 
+struct fwl_data {
+	const char *name;
+	u16 fwl_id;
+	u16 regions;
+};
+
 void setup_k3_mpu_regions(void);
 int early_console_init(void);
+void remove_fwl_configs(struct fwl_data *fwl_data, size_t fwl_data_size);
arch/arm/mach-k3/j721e_init.c +52 -0

64 lines not on this page · raw message

Signature · 1 line
2.17.1
#5 lore raw

PATCH 5/6 arm: K3: Increase default SYSFW image size allocation

In reply to Andrew F. Davis

The memory allocated to store the FIT image containing SYSFW and board configuration data is statically defined to the largest size expected. This was 276000 bytes but now needs to be grown to 277000 to make room for the slightly larger SYSFW image used on J721e High-Security devices.

---
 arch/arm/mach-k3/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-k3/Kconfig +1 -1
index 5583241943..2e111bbf27 100644
@@ -119,7 +119,7 @@ config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
 config K3_SYSFW_IMAGE_SIZE_MAX
 	int "Amount of memory dynamically allocated for loading SYSFW blob"
 	depends on K3_LOAD_SYSFW
-	default	276000
+	default	277000
 	help
 	  Amount of memory (in bytes) reserved through dynamic allocation at
 	  runtime for loading the combined System Firmware and configuration image
Signature · 1 line
2.17.1
#6 lore raw

PATCH 6/6 configs: Add configs for J721e High Security EVM

In reply to Andrew F. Davis

Add new defconfig files for the J721e High Security EVM.

These defconfigs are the same as for the non-secure part, except for:
CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y' CONFIG_BOOTCOMMAND uses FIT images for booting

---
 configs/j721e_hs_evm_a72_defconfig | 106 +++++++++++++++++++++++++++++
 configs/j721e_hs_evm_r5_defconfig  | 102 +++++++++++++++++++++++++++
 2 files changed, 208 insertions(+)
 create mode 100644 configs/j721e_hs_evm_a72_defconfig
 create mode 100644 configs/j721e_hs_evm_r5_defconfig
configs/j721e_hs_evm_a72_defconfig new file +106 -0
new file mode 100644
index 0000000000..61fc39442b
@@ -0,0 +1,106 @@
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SOC_K3_J721E=y
+CONFIG_TARGET_J721E_A72_EVM=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+# CONFIG_PSCI_RESET is not set
+CONFIG_SPL_TEXT_BASE=0x80080000
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT_IMAGE_POST_PROCESS=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_fit_${boot}; run get_overlaystring; run run_fit"
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_UFS=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0,nor0=47034000.hyperbus"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),- at 8m(hbmc.rootfs)"
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-common-proc-board"
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_TI_SCI=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_MTD_DEVICE=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_HBMC_AM654=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_REMOTEPROC_TI_K3_DSP=y
+CONFIG_REMOTEPROC_TI_K3_R5F=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_TI_SCI=y
+CONFIG_UFS=y
+CONFIG_CADENCE_UFS=y
+CONFIG_TI_J721E_UFS=y
+CONFIG_OF_LIBFDT_OVERLAY=y
configs/j721e_hs_evm_r5_defconfig new file +102 -0

102 lines not on this page · raw message

Signature · 1 line
2.17.1
#7 lore raw

cover J721e HS device support

In reply to Andrew F. Davis
Quoted 10 lines · Andrew F. Davis

Hello all,

This series brings up High-Security (HS) device support on the J721e platform. Support for this K3 HS device is much like the existing AM65x HS and this series leverages much of that support.

There are also a couple tangentially related fixups that I noticed while adding this support and testing. Although not strictly needed they do allow J721e HS to just work out-of-box by the time the last patch adds the defconfigs.

For the entire series:

Thank and regards,
Lokesh

Quoted 26 lines

Thanks,
Andrew

Andrew F. Davis (6):
configs: j721e_evm.h: Sync J721e environment configuration with AM65x
configs: ti: Factor out call to 'args_mmc' into MMC common environment
arm: K3: Fix header comment match AM6 specific file function
arm: K3: Disable ROM configured firewalls
arm: K3: Increase default SYSFW image size allocation
configs: Add configs for J721e High Security EVM

 arch/arm/mach-k3/Kconfig           |   2 +-
 arch/arm/mach-k3/am6_init.c        |  28 +++++++-
 arch/arm/mach-k3/common.c          |  30 ++++++++
 arch/arm/mach-k3/common.h          |   7 ++
 arch/arm/mach-k3/j721e_init.c      |  52 ++++++++++++++
 configs/j721e_hs_evm_a72_defconfig | 106 +++++++++++++++++++++++++++++
 configs/j721e_hs_evm_r5_defconfig  | 102 +++++++++++++++++++++++++++
 include/configs/j721e_evm.h        |  16 ++++-
 include/configs/ti_armv7_common.h  |   1 -
 include/environment/ti/mmc.h       |   5 +-
 10 files changed, 341 insertions(+), 8 deletions(-)
 create mode 100644 configs/j721e_hs_evm_a72_defconfig
 create mode 100644 configs/j721e_hs_evm_r5_defconfig
#8 lore raw

cover J721e HS device support

Hi Tom,

I see you have a -next again, if you don't want to take this for the v2020.01 perhaps this could be a good candidate for the next?

Andrew

Quoted 47 lines · Lokesh Vutla
Quoted 10 lines · Andrew F. Davis

Hello all,

This series brings up High-Security (HS) device support on the J721e platform. Support for this K3 HS device is much like the existing AM65x HS and this series leverages much of that support.

There are also a couple tangentially related fixups that I noticed while adding this support and testing. Although not strictly needed they do allow J721e HS to just work out-of-box by the time the last patch adds the defconfigs.

For the entire series:

Thank and regards,
Lokesh

Quoted 26 lines

Thanks,
Andrew

Andrew F. Davis (6):
configs: j721e_evm.h: Sync J721e environment configuration with AM65x
configs: ti: Factor out call to 'args_mmc' into MMC common environment
arm: K3: Fix header comment match AM6 specific file function
arm: K3: Disable ROM configured firewalls
arm: K3: Increase default SYSFW image size allocation
configs: Add configs for J721e High Security EVM

 arch/arm/mach-k3/Kconfig           |   2 +-
 arch/arm/mach-k3/am6_init.c        |  28 +++++++-
 arch/arm/mach-k3/common.c          |  30 ++++++++
 arch/arm/mach-k3/common.h          |   7 ++
 arch/arm/mach-k3/j721e_init.c      |  52 ++++++++++++++
 configs/j721e_hs_evm_a72_defconfig | 106 +++++++++++++++++++++++++++++
 configs/j721e_hs_evm_r5_defconfig  | 102 +++++++++++++++++++++++++++
 include/configs/j721e_evm.h        |  16 ++++-
 include/configs/ti_armv7_common.h  |   1 -
 include/environment/ti/mmc.h       |   5 +-
 10 files changed, 341 insertions(+), 8 deletions(-)
 create mode 100644 configs/j721e_hs_evm_a72_defconfig
 create mode 100644 configs/j721e_hs_evm_r5_defconfig
#9 lore raw

cover J721e HS device support

Hi Tom,

Looks like -next wasn't used for this, ping on getting this into master now?

Thanks,
Andrew

Quoted 55 lines · Andrew F. Davis

Hi Tom,

I see you have a -next again, if you don't want to take this for the v2020.01 perhaps this could be a good candidate for the next?

Andrew

Quoted 47 lines · Lokesh Vutla
Quoted 10 lines · Andrew F. Davis

Hello all,

This series brings up High-Security (HS) device support on the J721e platform. Support for this K3 HS device is much like the existing AM65x HS and this series leverages much of that support.

There are also a couple tangentially related fixups that I noticed while adding this support and testing. Although not strictly needed they do allow J721e HS to just work out-of-box by the time the last patch adds the defconfigs.

For the entire series:

Thank and regards,
Lokesh

Quoted 26 lines

Thanks,
Andrew

Andrew F. Davis (6):
configs: j721e_evm.h: Sync J721e environment configuration with AM65x
configs: ti: Factor out call to 'args_mmc' into MMC common environment
arm: K3: Fix header comment match AM6 specific file function
arm: K3: Disable ROM configured firewalls
arm: K3: Increase default SYSFW image size allocation
configs: Add configs for J721e High Security EVM

 arch/arm/mach-k3/Kconfig           |   2 +-
 arch/arm/mach-k3/am6_init.c        |  28 +++++++-
 arch/arm/mach-k3/common.c          |  30 ++++++++
 arch/arm/mach-k3/common.h          |   7 ++
 arch/arm/mach-k3/j721e_init.c      |  52 ++++++++++++++
 configs/j721e_hs_evm_a72_defconfig | 106 +++++++++++++++++++++++++++++
 configs/j721e_hs_evm_r5_defconfig  | 102 +++++++++++++++++++++++++++
 include/configs/j721e_evm.h        |  16 ++++-
 include/configs/ti_armv7_common.h  |   1 -
 include/environment/ti/mmc.h       |   5 +-
 10 files changed, 341 insertions(+), 8 deletions(-)
 create mode 100644 configs/j721e_hs_evm_a72_defconfig
 create mode 100644 configs/j721e_hs_evm_r5_defconfig
#10 lore raw

cover J721e HS device support

Quoted 4 lines · Andrew F. Davis

Hi Tom,

Looks like -next wasn't used for this, ping on getting this into master now?

Looks like a minor merge conflict now in master for this, I'll post a v2 to help with that.

Andrew

Quoted 59 lines

Thanks,
Andrew

Quoted 55 lines · Andrew F. Davis

Hi Tom,

I see you have a -next again, if you don't want to take this for the v2020.01 perhaps this could be a good candidate for the next?

Andrew

Quoted 47 lines · Lokesh Vutla
Quoted 10 lines · Andrew F. Davis

Hello all,

This series brings up High-Security (HS) device support on the J721e platform. Support for this K3 HS device is much like the existing AM65x HS and this series leverages much of that support.

There are also a couple tangentially related fixups that I noticed while adding this support and testing. Although not strictly needed they do allow J721e HS to just work out-of-box by the time the last patch adds the defconfigs.

For the entire series:

Thank and regards,
Lokesh

Quoted 26 lines

Thanks,
Andrew

Andrew F. Davis (6):
configs: j721e_evm.h: Sync J721e environment configuration with AM65x
configs: ti: Factor out call to 'args_mmc' into MMC common environment
arm: K3: Fix header comment match AM6 specific file function
arm: K3: Disable ROM configured firewalls
arm: K3: Increase default SYSFW image size allocation
configs: Add configs for J721e High Security EVM

 arch/arm/mach-k3/Kconfig           |   2 +-
 arch/arm/mach-k3/am6_init.c        |  28 +++++++-
 arch/arm/mach-k3/common.c          |  30 ++++++++
 arch/arm/mach-k3/common.h          |   7 ++
 arch/arm/mach-k3/j721e_init.c      |  52 ++++++++++++++
 configs/j721e_hs_evm_a72_defconfig | 106 +++++++++++++++++++++++++++++
 configs/j721e_hs_evm_r5_defconfig  | 102 +++++++++++++++++++++++++++
 include/configs/j721e_evm.h        |  16 ++++-
 include/configs/ti_armv7_common.h  |   1 -
 include/environment/ti/mmc.h       |   5 +-
 10 files changed, 341 insertions(+), 8 deletions(-)
 create mode 100644 configs/j721e_hs_evm_a72_defconfig
 create mode 100644 configs/j721e_hs_evm_r5_defconfig