configs/ls1046afrwy: Add TFA secure boot defconfig
PATCH v4 1/1 configs/ls1046afrwy: Add TFA secure boot defconfig
Enables secure boot related configs in defconfig for LS1046AFRWY.
---
Changes in V4:
Corrects commit message.
configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig new file +57 -0
@@ -0,0 +1,57 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1046AFRWY=y +CONFIG_TFABOOT=y +CONFIG_SYS_TEXT_BASE=0x82000000 +CONFIG_SECURE_BOOT=y +CONFIG_QSPI_AHB_INIT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_MISC_INIT_R=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y +CONFIG_MP=y +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy" +CONFIG_ENV_IS_NOWHERE=y +CONFIG_DM=y +CONFIG_SATA_CEVA=y +CONFIG_FSL_CAAM=y +CONFIG_DM_MMC=y +CONFIG_FSL_ESDHC=y +CONFIG_SPI_FLASH=y +# CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_GIGE=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_DM_SCSI=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_RSA=y +CONFIG_CMD_SETEXPR=y
Signature · 1 line
2.17.1
PATCH v4 1/1 configs/ls1046afrwy: Add TFA secure boot defconfig
Quoted 75 lines
-----Original Message-----
From: Udit Agarwal <[email protected]>
Sent: Wednesday, November 20, 2019 2:09 PM
To: u-boot at lists.denx.de
Cc: Priyanka Jain <[email protected]>; Arun Pathak <[email protected]>; Ruchika Gupta <[email protected]>; Udit Agarwal <[email protected]>
Subject: [PATCH v4] configs/ls1046afrwy: Add TFA secure boot defconfigEnables secure boot related configs in defconfig for LS1046AFRWY.
Signed-off-by Udit Agarwal <[email protected]>---
Changes in V4:
Corrects commit message.configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)create mode 100644 configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig new file +15
-0@@ -0,0 +1,57 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1046AFRWY=y +CONFIG_TFABOOT=y +CONFIG_SYS_TEXT_BASE=0x82000000 +CONFIG_SECURE_BOOT=y +CONFIG_QSPI_AHB_INIT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u- boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448
m(nand_free)"configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig new file +11
-0+CONFIG_MISC_INIT_R=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y +CONFIG_MP=y +CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448
m(nand_free)"configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig new file +13
-0+CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy" +CONFIG_ENV_IS_NOWHERE=y +CONFIG_DM=y +CONFIG_SATA_CEVA=y +CONFIG_FSL_CAAM=y +CONFIG_DM_MMC=y +CONFIG_FSL_ESDHC=y +CONFIG_SPI_FLASH=y +# CONFIG_SPI_FLASH_BAR is not set +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y +CONFIG_PHY_VITESSE=y CONFIG_PHY_GIGE=y CONFIG_E1000=y
CONFIG_PCI=y
+CONFIG_DM_PCI=yCONFIG_DM_PCI_COMPAT=y
Quoted 8 lines
CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_SCSI=yCONFIG_SYS_NS16550=yCONFIG_SPI=yCONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=yCONFIG_USB=yCONFIG_DM_USB=yCONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=yCONFIG_RSA=yCONFIG_CMD_SETEXPR=y--
2.17.1
Please rebase to top of tree. Some configs has been now moved to defconfig files.
-priyankajain