Rework REFCOUNT_FULL using atomic_fetch_* operations
Subsystems (11)
Will Deacon
maintainerv4 cover Rework REFCOUNT_FULL using atomic_fetch_* operations
Hi everybody,
This is a resend of version four of the patches I posted here:
v4: https://lore.kernel.org/lkml/[email protected]
Previous versions can be found at:
v1: https://lkml.kernel.org/r/[email protected]
v2: https://lkml.kernel.org/r/[email protected]
v3: https://lkml.kernel.org/r/[email protected]
I didn't receive any feedback last time around, other than some positive noises from Kees, so please consider this for inclusion in mainline.
Thanks,
Will
--->8
Will Deacon (10):
lib/refcount: Define constants for saturation and max refcount values lib/refcount: Ensure integer operands are treated as signed lib/refcount: Remove unused refcount_*_checked() variants lib/refcount: Move bulk of REFCOUNT_FULL implementation into header lib/refcount: Improve performance of generic REFCOUNT_FULL code lib/refcount: Move saturation warnings out of line lib/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
refcount: Consolidate implementations of refcount_t lib/refcount: Remove unused 'refcount_error_report()' function drivers/lkdtm: Remove references to CONFIG_REFCOUNT_FULL
arch/Kconfig | 21 --- arch/arm/Kconfig | 1 - arch/arm64/Kconfig | 1 - arch/s390/configs/debug_defconfig | 1 - arch/x86/Kconfig | 1 - arch/x86/include/asm/asm.h | 6 - arch/x86/include/asm/refcount.h | 126 -------------- arch/x86/mm/extable.c | 49 ------ drivers/gpu/drm/i915/Kconfig.debug | 1 - drivers/misc/lkdtm/refcount.c | 11 +- include/linux/kernel.h | 7 - include/linux/refcount.h | 269 ++++++++++++++++++++++++----- kernel/panic.c | 11 -- lib/refcount.c | 255 +++------------------------ 14 files changed, 257 insertions(+), 503 deletions(-) delete mode 100644 arch/x86/include/asm/refcount.h
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
Will Deacon
maintainerPATCH RESEND v4 1/10 lib/refcount: Define constants for saturation and max refcount values
The REFCOUNT_FULL implementation uses a different saturation point than the x86 implementation, which means that the shared refcount code in lib/refcount.c (e.g. refcount_dec_not_one()) needs to be aware of the difference.
Rather than duplicate the definitions from the lkdtm driver, instead move them into linux/refcount.h and update all references accordingly.
--- drivers/misc/lkdtm/refcount.c | 8 -------- include/linux/refcount.h | 10 +++++++++- lib/refcount.c | 37 +++++++++++++++++++---------------- 3 files changed, 29 insertions(+), 26 deletions(-)
drivers/misc/lkdtm/refcount.c +0 -8
@@ -6,14 +6,6 @@#include "lkdtm.h" #include <linux/refcount.h> -#ifdef CONFIG_REFCOUNT_FULL -#define REFCOUNT_MAX (UINT_MAX - 1) -#define REFCOUNT_SATURATED UINT_MAX -#else -#define REFCOUNT_MAX INT_MAX -#define REFCOUNT_SATURATED (INT_MIN / 2) -#endif -static void overflow_check (refcount_t *ref) {switch (refcount_read (ref)) {
include/linux/refcount.h +9 -1
@@ -4,6 +4,7 @@#include <linux/atomic.h> #include <linux/compiler.h> +#include <linux/limits.h> #include <linux/spinlock_types.h> struct mutex ;
@@ -12,7 +13,7 @@ struct mutex;* struct refcount_t - variant of atomic_t specialized for reference counts * @refs: atomic_t counter field * -* The counter saturates at UINT_MAX and will not move once +* The counter saturates at REFCOUNT_SATURATED and will not move once * there. This avoids wrapping the counter and causing 'spurious' * use-after-free bugs. */
@@ -56,6 +57,9 @@ extern void refcount_dec_checked(refcount_t *r);#ifdef CONFIG_REFCOUNT_FULL +#define REFCOUNT_MAX (UINT_MAX - 1) +#define REFCOUNT_SATURATED UINT_MAX +#define refcount_add_not_zero refcount_add_not_zero_checked#define refcount_add refcount_add_checked
@@ -68,6 +72,10 @@ extern void refcount_dec_checked(refcount_t *r);#define refcount_dec refcount_dec_checked#else + +#define REFCOUNT_MAX INT_MAX +#define REFCOUNT_SATURATED (INT_MIN / 2) +# ifdef CONFIG_ARCH_HAS_REFCOUNT # include <asm/refcount.h> # else
lib/refcount.c +20 -17
@@ -5,8 +5,8 @@* The interface matches the atomic_t interface (to aid in porting) but only * provides the few functions one should use for reference counting. * -* It differs in that the counter saturates at UINT_MAX and will not move once -* there. This avoids wrapping the counter and causing 'spurious' +* It differs in that the counter saturates at REFCOUNT_SATURATED and will not +* move once there. This avoids wrapping the counter and causing 'spurious' * use-after-free issues. * * Memory ordering rules are slightly relaxed wrt regular atomic_t functions
@@ -48,7 +48,7 @@* @i: the value to add to the refcount * @r: the refcount * -* Will saturate at UINT_MAX and WARN. +* Will saturate at REFCOUNT_SATURATED and WARN. * * Provides no memory ordering, it is assumed the caller has guaranteed the * object memory to be stable (RCU, etc.). It does provide a control dependency
@@ -69,16 +69,17 @@ bool refcount_add_not_zero_checked(unsigned int i, refcount_t *r)if (!val)return false; -if (unlikely (val ==UINT_MAX )) +if (unlikely (val ==REFCOUNT_SATURATED ))return true; new = val + i;if (new < val) - new =UINT_MAX ; + new =REFCOUNT_SATURATED ; }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); -WARN_ONCE (new ==UINT_MAX ,"refcount_t: saturated; leaking memory.\n" ); +WARN_ONCE (new ==REFCOUNT_SATURATED , +"refcount_t: saturated; leaking memory.\n" );return true; }
@@ -89,7 +90,7 @@ EXPORT_SYMBOL(refcount_add_not_zero_checked);* @i: the value to add to the refcount * @r: the refcount * -* Similar to atomic_add(), but will saturate at UINT_MAX and WARN. +* Similar to atomic_add(), but will saturate at REFCOUNT_SATURATED and WARN. * * Provides no memory ordering, it is assumed the caller has guaranteed the * object memory to be stable (RCU, etc.). It does provide a control dependency
@@ -110,7 +111,8 @@ EXPORT_SYMBOL(refcount_add_checked);* refcount_inc_not_zero_checked - increment a refcount unless it is 0 * @r: the refcount to increment * -* Similar to atomic_inc_not_zero(), but will saturate at UINT_MAX and WARN. +* Similar to atomic_inc_not_zero(), but will saturate at REFCOUNT_SATURATED +* and WARN. * * Provides no memory ordering, it is assumed the caller has guaranteed the * object memory to be stable (RCU, etc.). It does provide a control dependency
@@ -133,7 +135,8 @@ bool refcount_inc_not_zero_checked(refcount_t *r) }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); -WARN_ONCE (new ==UINT_MAX ,"refcount_t: saturated; leaking memory.\n" ); +WARN_ONCE (new ==REFCOUNT_SATURATED , +"refcount_t: saturated; leaking memory.\n" );return true; }
@@ -143,7 +146,7 @@ EXPORT_SYMBOL(refcount_inc_not_zero_checked);* refcount_inc_checked - increment a refcount * @r: the refcount to increment * -* Similar to atomic_inc(), but will saturate at UINT_MAX and WARN. +* Similar to atomic_inc(), but will saturate at REFCOUNT_SATURATED and WARN. * * Provides no memory ordering, it is assumed the caller already has a * reference on the object.
@@ -164,7 +167,7 @@ EXPORT_SYMBOL(refcount_inc_checked);* * Similar to atomic_dec_and_test(), but it will WARN, return false and * ultimately leak on underflow and will fail to decrement when saturated -* at UINT_MAX. +* at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before, and provides an acquire ordering on success such that free()
@@ -182,7 +185,7 @@ bool refcount_sub_and_test_checked(unsigned int i, refcount_t *r)unsigned int new, val =atomic_read (&r->refs); do { - if (unlikely(val == UINT_MAX)) + if (unlikely(val == REFCOUNT_SATURATED)) return false; new = val - i;
@@ -207,7 +210,7 @@ EXPORT_SYMBOL(refcount_sub_and_test_checked);* @r: the refcount * * Similar to atomic_dec_and_test(), it will WARN on underflow and fail to -* decrement when saturated at UINT_MAX. +* decrement when saturated at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before, and provides an acquire ordering on success such that free()
@@ -226,7 +229,7 @@ EXPORT_SYMBOL(refcount_dec_and_test_checked);* @r: the refcount * * Similar to atomic_dec(), it will WARN on underflow and fail to decrement -* when saturated at UINT_MAX. +* when saturated at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before.
@@ -277,7 +280,7 @@ bool refcount_dec_not_one(refcount_t *r)unsigned int new, val =atomic_read (&r->refs); do { - if (unlikely(val == UINT_MAX)) + if (unlikely(val == REFCOUNT_SATURATED)) return true; if (val == 1)
@@ -302,7 +305,7 @@ EXPORT_SYMBOL(refcount_dec_not_one);* @lock: the mutex to be locked * * Similar to atomic_dec_and_mutex_lock(), it will WARN on underflow and fail -* to decrement when saturated at UINT_MAX. +* to decrement when saturated at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before, and provides a control dependency such that free() must come after.
@@ -333,7 +336,7 @@ EXPORT_SYMBOL(refcount_dec_and_mutex_lock);* @lock: the spinlock to be locked * * Similar to atomic_dec_and_lock(), it will WARN on underflow and fail to -* decrement when saturated at UINT_MAX. +* decrement when saturated at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before, and provides a control dependency such that free() must come after.
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
[tip: locking/core] locking/refcount: Define constants for saturation and max refcount values
The following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: 23e6b169c9917fbd77534f8c5f378cb073f548bd Gitweb: https://git.kernel.org/tip/23e6b169c9917fbd77534f8c5f378cb073f548bd Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:58:53 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:14:13 +01:00
locking/refcount: Define constants for saturation and max refcount values
The REFCOUNT_FULL implementation uses a different saturation point than the x86 implementation, which means that the shared refcount code in lib/refcount.c (e.g. refcount_dec_not_one()) needs to be aware of the difference.
Rather than duplicate the definitions from the lkdtm driver, instead move them into <linux/refcount.h> and update all references accordingly.
--- drivers/misc/lkdtm/refcount.c | 8 +------- include/linux/refcount.h | 10 ++++++++- lib/refcount.c | 37 ++++++++++++++++++---------------- 3 files changed, 29 insertions(+), 26 deletions(-)
drivers/misc/lkdtm/refcount.c +0 -8
@@ -6,14 +6,6 @@#include "lkdtm.h" #include <linux/refcount.h> -#ifdef CONFIG_REFCOUNT_FULL -#define REFCOUNT_MAX (UINT_MAX - 1) -#define REFCOUNT_SATURATED UINT_MAX -#else -#define REFCOUNT_MAX INT_MAX -#define REFCOUNT_SATURATED (INT_MIN / 2) -#endif -static void overflow_check (refcount_t *ref) {switch (refcount_read (ref)) {
include/linux/refcount.h +9 -1
@@ -4,6 +4,7 @@#include <linux/atomic.h> #include <linux/compiler.h> +#include <linux/limits.h> #include <linux/spinlock_types.h> struct mutex ;
@@ -12,7 +13,7 @@ struct mutex;* struct refcount_t - variant of atomic_t specialized for reference counts * @refs: atomic_t counter field * -* The counter saturates at UINT_MAX and will not move once +* The counter saturates at REFCOUNT_SATURATED and will not move once * there. This avoids wrapping the counter and causing 'spurious' * use-after-free bugs. */
@@ -56,6 +57,9 @@ extern void refcount_dec_checked(refcount_t *r);#ifdef CONFIG_REFCOUNT_FULL +#define REFCOUNT_MAX (UINT_MAX - 1) +#define REFCOUNT_SATURATED UINT_MAX +#define refcount_add_not_zero refcount_add_not_zero_checked#define refcount_add refcount_add_checked
@@ -68,6 +72,10 @@ extern void refcount_dec_checked(refcount_t *r);#define refcount_dec refcount_dec_checked#else + +#define REFCOUNT_MAX INT_MAX +#define REFCOUNT_SATURATED (INT_MIN / 2) +# ifdef CONFIG_ARCH_HAS_REFCOUNT # include <asm/refcount.h> # else
lib/refcount.c +20 -17
@@ -5,8 +5,8 @@* The interface matches the atomic_t interface (to aid in porting) but only * provides the few functions one should use for reference counting. * -* It differs in that the counter saturates at UINT_MAX and will not move once -* there. This avoids wrapping the counter and causing 'spurious' +* It differs in that the counter saturates at REFCOUNT_SATURATED and will not +* move once there. This avoids wrapping the counter and causing 'spurious' * use-after-free issues. * * Memory ordering rules are slightly relaxed wrt regular atomic_t functions
@@ -48,7 +48,7 @@* @i: the value to add to the refcount * @r: the refcount * -* Will saturate at UINT_MAX and WARN. +* Will saturate at REFCOUNT_SATURATED and WARN. * * Provides no memory ordering, it is assumed the caller has guaranteed the * object memory to be stable (RCU, etc.). It does provide a control dependency
@@ -69,16 +69,17 @@ bool refcount_add_not_zero_checked(unsigned int i, refcount_t *r)if (!val)return false; -if (unlikely (val ==UINT_MAX )) +if (unlikely (val ==REFCOUNT_SATURATED ))return true; new = val + i;if (new < val) - new =UINT_MAX ; + new =REFCOUNT_SATURATED ; }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); -WARN_ONCE (new ==UINT_MAX ,"refcount_t: saturated; leaking memory.\n" ); +WARN_ONCE (new ==REFCOUNT_SATURATED , +"refcount_t: saturated; leaking memory.\n" );return true; }
@@ -89,7 +90,7 @@ EXPORT_SYMBOL(refcount_add_not_zero_checked);* @i: the value to add to the refcount * @r: the refcount * -* Similar to atomic_add(), but will saturate at UINT_MAX and WARN. +* Similar to atomic_add(), but will saturate at REFCOUNT_SATURATED and WARN. * * Provides no memory ordering, it is assumed the caller has guaranteed the * object memory to be stable (RCU, etc.). It does provide a control dependency
@@ -110,7 +111,8 @@ EXPORT_SYMBOL(refcount_add_checked);* refcount_inc_not_zero_checked - increment a refcount unless it is 0 * @r: the refcount to increment * -* Similar to atomic_inc_not_zero(), but will saturate at UINT_MAX and WARN. +* Similar to atomic_inc_not_zero(), but will saturate at REFCOUNT_SATURATED +* and WARN. * * Provides no memory ordering, it is assumed the caller has guaranteed the * object memory to be stable (RCU, etc.). It does provide a control dependency
@@ -133,7 +135,8 @@ bool refcount_inc_not_zero_checked(refcount_t *r) }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); -WARN_ONCE (new ==UINT_MAX ,"refcount_t: saturated; leaking memory.\n" ); +WARN_ONCE (new ==REFCOUNT_SATURATED , +"refcount_t: saturated; leaking memory.\n" );return true; }
@@ -143,7 +146,7 @@ EXPORT_SYMBOL(refcount_inc_not_zero_checked);* refcount_inc_checked - increment a refcount * @r: the refcount to increment * -* Similar to atomic_inc(), but will saturate at UINT_MAX and WARN. +* Similar to atomic_inc(), but will saturate at REFCOUNT_SATURATED and WARN. * * Provides no memory ordering, it is assumed the caller already has a * reference on the object.
@@ -164,7 +167,7 @@ EXPORT_SYMBOL(refcount_inc_checked);* * Similar to atomic_dec_and_test(), but it will WARN, return false and * ultimately leak on underflow and will fail to decrement when saturated -* at UINT_MAX. +* at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before, and provides an acquire ordering on success such that free()
@@ -182,7 +185,7 @@ bool refcount_sub_and_test_checked(unsigned int i, refcount_t *r)unsigned int new, val =atomic_read (&r->refs); do { - if (unlikely(val == UINT_MAX)) + if (unlikely(val == REFCOUNT_SATURATED)) return false; new = val - i;
@@ -207,7 +210,7 @@ EXPORT_SYMBOL(refcount_sub_and_test_checked);* @r: the refcount * * Similar to atomic_dec_and_test(), it will WARN on underflow and fail to -* decrement when saturated at UINT_MAX. +* decrement when saturated at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before, and provides an acquire ordering on success such that free()
@@ -226,7 +229,7 @@ EXPORT_SYMBOL(refcount_dec_and_test_checked);* @r: the refcount * * Similar to atomic_dec(), it will WARN on underflow and fail to decrement -* when saturated at UINT_MAX. +* when saturated at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before.
@@ -277,7 +280,7 @@ bool refcount_dec_not_one(refcount_t *r)unsigned int new, val =atomic_read (&r->refs); do { - if (unlikely(val == UINT_MAX)) + if (unlikely(val == REFCOUNT_SATURATED)) return true; if (val == 1)
@@ -302,7 +305,7 @@ EXPORT_SYMBOL(refcount_dec_not_one);* @lock: the mutex to be locked * * Similar to atomic_dec_and_mutex_lock(), it will WARN on underflow and fail -* to decrement when saturated at UINT_MAX. +* to decrement when saturated at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before, and provides a control dependency such that free() must come after.
@@ -333,7 +336,7 @@ EXPORT_SYMBOL(refcount_dec_and_mutex_lock);* @lock: the spinlock to be locked * * Similar to atomic_dec_and_lock(), it will WARN on underflow and fail to -* decrement when saturated at UINT_MAX. +* decrement when saturated at REFCOUNT_SATURATED. * * Provides release memory ordering, such that prior loads and stores are done * before, and provides a control dependency such that free() must come after.
Will Deacon
maintainerPATCH RESEND v4 2/10 lib/refcount: Ensure integer operands are treated as signed
In reply to Will DeaconIn preparation for changing the saturation point of REFCOUNT_FULL to INT_MIN / 2, change the type of integer operands passed into the API from 'unsigned int' to 'int' so that we can avoid casting during comparisons when we don't want to fall foul of C integral conversion rules for signed and unsigned types.
Since the kernel is compiled with '-fno-strict-overflow', we don't need to worry about the UB introduced by signed overflow here. Furthermore, we're already making heavy use of the atomic_t API, which operates exclusively on signed types.
--- include/linux/refcount.h | 14 +++++++------- lib/refcount.c | 6 +++--- 2 files changed, 10 insertions(+), 10 deletions(-)
include/linux/refcount.h +7 -7
@@ -28,7 +28,7 @@ typedef struct refcount_struct {* @r: the refcount * @n: value to which the refcount will be set */ -static inline void refcount_set (refcount_t *r,unsigned int n) +static inline void refcount_set (refcount_t *r,int n) {atomic_set (&r->refs, n); }
@@ -44,13 +44,13 @@ static inline unsigned int refcount_read(const refcount_t *r)return atomic_read (&r->refs); } -extern __must_check bool refcount_add_not_zero_checked (unsigned int i,refcount_t *r); -extern void refcount_add_checked (unsigned int i,refcount_t *r); +extern __must_check bool refcount_add_not_zero_checked (int i,refcount_t *r); +extern void refcount_add_checked (int i,refcount_t *r);extern __must_check bool refcount_inc_not_zero_checked (refcount_t *r);extern void refcount_inc_checked (refcount_t *r); -extern __must_check bool refcount_sub_and_test_checked (unsigned int i,refcount_t *r); +extern __must_check bool refcount_sub_and_test_checked (int i,refcount_t *r);extern __must_check bool refcount_dec_and_test_checked (refcount_t *r);extern void refcount_dec_checked (refcount_t *r);
@@ -79,12 +79,12 @@ extern void refcount_dec_checked(refcount_t *r);# ifdef CONFIG_ARCH_HAS_REFCOUNT # include <asm/refcount.h> # else -static inline __must_check bool refcount_add_not_zero (unsigned int i,refcount_t *r) +static inline __must_check bool refcount_add_not_zero (int i,refcount_t *r) {return atomic_add_unless (&r->refs, i,0 ); } -static inline void refcount_add (unsigned int i,refcount_t *r) +static inline void refcount_add (int i,refcount_t *r) {atomic_add (i, &r->refs); }
@@ -99,7 +99,7 @@ static inline void refcount_inc(refcount_t *r)atomic_inc (&r->refs); } -static inline __must_check bool refcount_sub_and_test (unsigned int i,refcount_t *r) +static inline __must_check bool refcount_sub_and_test (int i,refcount_t *r) {return atomic_sub_and_test (i, &r->refs); }
lib/refcount.c +3 -3
@@ -61,7 +61,7 @@* * Return: false if the passed refcount is 0, true otherwise */ -bool refcount_add_not_zero_checked (unsigned int i,refcount_t *r) +bool refcount_add_not_zero_checked (int i,refcount_t *r) {unsigned int new, val =atomic_read (&r->refs);
@@ -101,7 +101,7 @@ EXPORT_SYMBOL(refcount_add_not_zero_checked);* cases, refcount_inc(), or one of its variants, should instead be used to * increment a reference count. */ -void refcount_add_checked (unsigned int i,refcount_t *r) +void refcount_add_checked (int i,refcount_t *r) {WARN_ONCE (!refcount_add_not_zero_checked (i, r),"refcount_t: addition on 0; use-after-free.\n" ); }
@@ -180,7 +180,7 @@ EXPORT_SYMBOL(refcount_inc_checked);* * Return: true if the resulting refcount is 0, false otherwise */ -bool refcount_sub_and_test_checked (unsigned int i,refcount_t *r) +bool refcount_sub_and_test_checked (int i,refcount_t *r) {unsigned int new, val =atomic_read (&r->refs);
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
[tip: locking/core] locking/refcount: Ensure integer operands are treated as signed
The following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: 97a1420adf0cdf0cf6f41bab0b2acf658c96b94b Gitweb: https://git.kernel.org/tip/97a1420adf0cdf0cf6f41bab0b2acf658c96b94b Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:58:54 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:14:57 +01:00
locking/refcount: Ensure integer operands are treated as signed
In preparation for changing the saturation point of REFCOUNT_FULL to INT_MIN/2, change the type of integer operands passed into the API from 'unsigned int' to 'int' so that we can avoid casting during comparisons when we don't want to fall foul of C integral conversion rules for signed and unsigned types.
Since the kernel is compiled with '-fno-strict-overflow', we don't need to worry about the UB introduced by signed overflow here. Furthermore, we're already making heavy use of the atomic_t API, which operates exclusively on signed types.
--- include/linux/refcount.h | 14 +++++++------- lib/refcount.c | 6 +++--- 2 files changed, 10 insertions(+), 10 deletions(-)
include/linux/refcount.h +7 -7
@@ -28,7 +28,7 @@ typedef struct refcount_struct {* @r: the refcount * @n: value to which the refcount will be set */ -static inline void refcount_set (refcount_t *r,unsigned int n) +static inline void refcount_set (refcount_t *r,int n) {atomic_set (&r->refs, n); }
@@ -44,13 +44,13 @@ static inline unsigned int refcount_read(const refcount_t *r)return atomic_read (&r->refs); } -extern __must_check bool refcount_add_not_zero_checked (unsigned int i,refcount_t *r); -extern void refcount_add_checked (unsigned int i,refcount_t *r); +extern __must_check bool refcount_add_not_zero_checked (int i,refcount_t *r); +extern void refcount_add_checked (int i,refcount_t *r);extern __must_check bool refcount_inc_not_zero_checked (refcount_t *r);extern void refcount_inc_checked (refcount_t *r); -extern __must_check bool refcount_sub_and_test_checked (unsigned int i,refcount_t *r); +extern __must_check bool refcount_sub_and_test_checked (int i,refcount_t *r);extern __must_check bool refcount_dec_and_test_checked (refcount_t *r);extern void refcount_dec_checked (refcount_t *r);
@@ -79,12 +79,12 @@ extern void refcount_dec_checked(refcount_t *r);# ifdef CONFIG_ARCH_HAS_REFCOUNT # include <asm/refcount.h> # else -static inline __must_check bool refcount_add_not_zero (unsigned int i,refcount_t *r) +static inline __must_check bool refcount_add_not_zero (int i,refcount_t *r) {return atomic_add_unless (&r->refs, i,0 ); } -static inline void refcount_add (unsigned int i,refcount_t *r) +static inline void refcount_add (int i,refcount_t *r) {atomic_add (i, &r->refs); }
@@ -99,7 +99,7 @@ static inline void refcount_inc(refcount_t *r)atomic_inc (&r->refs); } -static inline __must_check bool refcount_sub_and_test (unsigned int i,refcount_t *r) +static inline __must_check bool refcount_sub_and_test (int i,refcount_t *r) {return atomic_sub_and_test (i, &r->refs); }
lib/refcount.c +3 -3
@@ -61,7 +61,7 @@* * Return: false if the passed refcount is 0, true otherwise */ -bool refcount_add_not_zero_checked (unsigned int i,refcount_t *r) +bool refcount_add_not_zero_checked (int i,refcount_t *r) {unsigned int new, val =atomic_read (&r->refs);
@@ -101,7 +101,7 @@ EXPORT_SYMBOL(refcount_add_not_zero_checked);* cases, refcount_inc(), or one of its variants, should instead be used to * increment a reference count. */ -void refcount_add_checked (unsigned int i,refcount_t *r) +void refcount_add_checked (int i,refcount_t *r) {WARN_ONCE (!refcount_add_not_zero_checked (i, r),"refcount_t: addition on 0; use-after-free.\n" ); }
@@ -180,7 +180,7 @@ EXPORT_SYMBOL(refcount_inc_checked);* * Return: true if the resulting refcount is 0, false otherwise */ -bool refcount_sub_and_test_checked (unsigned int i,refcount_t *r) +bool refcount_sub_and_test_checked (int i,refcount_t *r) {unsigned int new, val =atomic_read (&r->refs);
Will Deacon
maintainerPATCH RESEND v4 3/10 lib/refcount: Remove unused refcount_*_checked() variants
In reply to Will DeaconThe full-fat refcount implementation is exposed via a set of functions suffixed with "_checked()", the idea being that code can choose to use the more expensive, yet more secure implementation on a case-by-case basis.
In reality, this hasn't happened, so with a grand total of zero users, let's remove the checked variants for now by simply dropping the suffix and predicating the out-of-line functions on CONFIG_REFCOUNT_FULL=y.
--- include/linux/refcount.h | 25 ++++++------------- lib/refcount.c | 54 +++++++++++++++++++++------------------- 2 files changed, 36 insertions(+), 43 deletions(-)
include/linux/refcount.h +7 -18
@@ -44,32 +44,21 @@ static inline unsigned int refcount_read(const refcount_t *r)return atomic_read (&r->refs); } -extern __must_check bool refcount_add_not_zero_checked (int i,refcount_t *r); -extern void refcount_add_checked (int i,refcount_t *r); - -extern __must_check bool refcount_inc_not_zero_checked (refcount_t *r); -extern void refcount_inc_checked (refcount_t *r); - -extern __must_check bool refcount_sub_and_test_checked (int i,refcount_t *r); - -extern __must_check bool refcount_dec_and_test_checked (refcount_t *r); -extern void refcount_dec_checked (refcount_t *r); -#ifdef CONFIG_REFCOUNT_FULL #define REFCOUNT_MAX (UINT_MAX - 1)#define REFCOUNT_SATURATED UINT_MAX -#define refcount_add_not_zero refcount_add_not_zero_checked -#define refcount_add refcount_add_checked +extern __must_check bool refcount_add_not_zero (int i,refcount_t *r); +extern void refcount_add (int i,refcount_t *r); -#define refcount_inc_not_zero refcount_inc_not_zero_checked -#define refcount_inc refcount_inc_checked +extern __must_check bool refcount_inc_not_zero (refcount_t *r); +extern void refcount_inc (refcount_t *r); -#define refcount_sub_and_test refcount_sub_and_test_checked +extern __must_check bool refcount_sub_and_test (int i,refcount_t *r); -#define refcount_dec_and_test refcount_dec_and_test_checked -#define refcount_dec refcount_dec_checked +extern __must_check bool refcount_dec_and_test (refcount_t *r); +extern void refcount_dec (refcount_t *r);#else
lib/refcount.c +29 -25
141 lines not on this page · raw message
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
Re: [RESEND PATCH v4 03/10] lib/refcount: Remove unused refcount_*_checked() variants
Quoted 8 lines · Will Deacon
The full-fat refcount implementation is exposed via a set of functions suffixed with "
_checked()", the idea being that code can choose to use the more expensive, yet more secure implementation on a case-by-case basis.In reality, this hasn't happened, so with a grand total of zero users, let's remove the checked variants for now by simply dropping the suffix and predicating the out-of-line functions on
CONFIG_REFCOUNT_FULL=y.
I am still interested in the _checked versions and have a WIP patch that adds that to btrfs (that was my original plan) but haven't had enough time to finalize it. The patch itself is simple, the missing part is to understand and document what the saturated counters would do with the structures.
If the _checked helpers are really bothering for you, then well remove it, but I think it's a good API extension that makes the full-refcount semantics independent of the config.
Re: [RESEND PATCH v4 03/10] lib/refcount: Remove unused refcount_*_checked() variants
Quoted 10 lines · David Sterba
Quoted 8 lines · Will Deacon
The full-fat refcount implementation is exposed via a set of functions suffixed with "
_checked()", the idea being that code can choose to use the more expensive, yet more secure implementation on a case-by-case basis.In reality, this hasn't happened, so with a grand total of zero users, let's remove the checked variants for now by simply dropping the suffix and predicating the out-of-line functions on
CONFIG_REFCOUNT_FULL=y.
Quoted 5 lines
I am still interested in the
_checkedversions and have a WIP patch that adds that to btrfs (that was my original plan) but haven't had enough time to finalize it. The patch itself is simple, the missing part is to understand and document what the saturated counters would do with the structures.
The good news is that this series removes the case of refcount_t _not_ being checked, so there's no need for _checked helpers. CONFIG_REFCOUNT_FULL gets removed because all refcount_t ends up being checked on all architectures. No extra work needed! :) (See patch 8)
Signature · 1 line
Kees Cook
Re: [RESEND PATCH v4 03/10] lib/refcount: Remove unused refcount_*_checked() variants
Quoted 17 lines · Kees Cook
Quoted 10 lines · David Sterba
Quoted 8 lines · Will Deacon
The full-fat refcount implementation is exposed via a set of functions suffixed with "
_checked()", the idea being that code can choose to use the more expensive, yet more secure implementation on a case-by-case basis.In reality, this hasn't happened, so with a grand total of zero users, let's remove the checked variants for now by simply dropping the suffix and predicating the out-of-line functions on
CONFIG_REFCOUNT_FULL=y.Quoted 5 lines
I am still interested in the
_checkedversions and have a WIP patch that adds that to btrfs (that was my original plan) but haven't had enough time to finalize it. The patch itself is simple, the missing part is to understand and document what the saturated counters would do with the structures.
Quoted 4 lines
The good news is that this series removes the case of
refcount_t_not_ being checked, so there's no need for_checkedhelpers.CONFIG_REFCOUNT_FULLgets removed because allrefcount_tends up being checked on all architectures. No extra work needed! :) (See patch 8)
Oh I see, that's great. Thanks.
[tip: locking/core] locking/refcount: Remove unused refcount_*_checked() variants
In reply to Will DeaconThe following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: 7221762c48c6bbbcc6cc51d8b803c06930215e34 Gitweb: https://git.kernel.org/tip/7221762c48c6bbbcc6cc51d8b803c06930215e34 Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:58:55 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:15:03 +01:00
locking/refcount: Remove unused refcount_*_checked() variants
The full-fat refcount implementation is exposed via a set of functions suffixed with "_checked()", the idea being that code can choose to use the more expensive, yet more secure implementation on a case-by-case basis.
In reality, this hasn't happened, so with a grand total of zero users, let's remove the checked variants for now by simply dropping the suffix and predicating the out-of-line functions on CONFIG_REFCOUNT_FULL=y.
--- include/linux/refcount.h | 25 +++++------------- lib/refcount.c | 54 ++++++++++++++++++++------------------- 2 files changed, 36 insertions(+), 43 deletions(-)
include/linux/refcount.h +7 -18
@@ -44,32 +44,21 @@ static inline unsigned int refcount_read(const refcount_t *r)return atomic_read (&r->refs); } -extern __must_check bool refcount_add_not_zero_checked (int i,refcount_t *r); -extern void refcount_add_checked (int i,refcount_t *r); - -extern __must_check bool refcount_inc_not_zero_checked (refcount_t *r); -extern void refcount_inc_checked (refcount_t *r); - -extern __must_check bool refcount_sub_and_test_checked (int i,refcount_t *r); - -extern __must_check bool refcount_dec_and_test_checked (refcount_t *r); -extern void refcount_dec_checked (refcount_t *r); -#ifdef CONFIG_REFCOUNT_FULL #define REFCOUNT_MAX (UINT_MAX - 1)#define REFCOUNT_SATURATED UINT_MAX -#define refcount_add_not_zero refcount_add_not_zero_checked -#define refcount_add refcount_add_checked +extern __must_check bool refcount_add_not_zero (int i,refcount_t *r); +extern void refcount_add (int i,refcount_t *r); -#define refcount_inc_not_zero refcount_inc_not_zero_checked -#define refcount_inc refcount_inc_checked +extern __must_check bool refcount_inc_not_zero (refcount_t *r); +extern void refcount_inc (refcount_t *r); -#define refcount_sub_and_test refcount_sub_and_test_checked +extern __must_check bool refcount_sub_and_test (int i,refcount_t *r); -#define refcount_dec_and_test refcount_dec_and_test_checked -#define refcount_dec refcount_dec_checked +extern __must_check bool refcount_dec_and_test (refcount_t *r); +extern void refcount_dec (refcount_t *r);#else
lib/refcount.c +29 -25
141 lines not on this page · raw message
Will Deacon
maintainerPATCH RESEND v4 4/10 lib/refcount: Move bulk of REFCOUNT_FULL implementation into header
In reply to Will DeaconIn an effort to improve performance of the REFCOUNT_FULL implementation, move the bulk of its functions into linux/refcount.h. This allows them to be inlined in the same way as if they had been provided via CONFIG_ARCH_HAS_REFCOUNT.
--- include/linux/refcount.h | 237 ++++++++++++++++++++++++++++++++++++-- lib/refcount.c | 238 +-------------------------------------- 2 files changed, 229 insertions(+), 246 deletions(-)
include/linux/refcount.h +228 -9
@@ -45,22 +45,241 @@ static inline unsigned int refcount_read(const refcount_t *r) }#ifdef CONFIG_REFCOUNT_FULL +#include <linux/bug.h> #define REFCOUNT_MAX (UINT_MAX - 1)#define REFCOUNT_SATURATED UINT_MAX -extern __must_check bool refcount_add_not_zero (int i,refcount_t *r); -extern void refcount_add (int i,refcount_t *r); +/* +* Variant of atomic_t specialized for reference counts. +* +* The interface matches the atomic_t interface (to aid in porting) but only +* provides the few functions one should use for reference counting. +* +* It differs in that the counter saturates at REFCOUNT_SATURATED and will not +* move once there. This avoids wrapping the counter and causing 'spurious' +* use-after-free issues. +* +* Memory ordering rules are slightly relaxed wrt regular atomic_t functions +* and provide only what is strictly required for refcounts. +* +* The increments are fully relaxed; these will not provide ordering. The +* rationale is that whatever is used to obtain the object we're increasing the +* reference count on will provide the ordering. For locked data structures, +* its the lock acquire, for RCU/lockless data structures its the dependent +* load. +* +* Do note that inc_not_zero() provides a control dependency which will order +* future stores against the inc, this ensures we'll never modify the object +* if we did not in fact acquire a reference. +* +* The decrements will provide release order, such that all the prior loads and +* stores will be issued before, it also provides a control dependency, which +* will order us against the subsequent free(). +* +* The control dependency is against the load of the cmpxchg (ll/sc) that +* succeeded. This means the stores aren't fully ordered, but this is fine +* because the 1->0 transition indicates no concurrency. +* +* Note that the allocator is responsible for ordering things between free() +* and alloc(). +* +* The decrements dec_and_test() and sub_and_test() also provide acquire +* ordering on success. +* +*/ + +/** +* refcount_add_not_zero - add a value to a refcount unless it is 0 +* @i: the value to add to the refcount +* @r: the refcount +* +* Will saturate at REFCOUNT_SATURATED and WARN. +* +* Provides no memory ordering, it is assumed the caller has guaranteed the +* object memory to be stable (RCU, etc.). It does provide a control dependency +* and thereby orders future stores. See the comment on top. +* +* Use of this function is not recommended for the normal reference counting +* use case in which references are taken and released one at a time. In these +* cases, refcount_inc(), or one of its variants, should instead be used to +* increment a reference count. +* +* Return: false if the passed refcount is 0, true otherwise +*/ +static inline __must_check bool refcount_add_not_zero (int i,refcount_t *r) +{ +unsigned int new, val =atomic_read (&r->refs); + +do { +if (!val) +return false; + +if (unlikely (val ==REFCOUNT_SATURATED )) +return true; + + new = val + i; +if (new < val) + new =REFCOUNT_SATURATED ; + + }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); + +WARN_ONCE (new ==REFCOUNT_SATURATED , +"refcount_t: saturated; leaking memory.\n" ); + +return true; +} + +/** +* refcount_add - add a value to a refcount +* @i: the value to add to the refcount +* @r: the refcount +* +* Similar to atomic_add(), but will saturate at REFCOUNT_SATURATED and WARN. +* +* Provides no memory ordering, it is assumed the caller has guaranteed the +* object memory to be stable (RCU, etc.). It does provide a control dependency +* and thereby orders future stores. See the comment on top. +* +* Use of this function is not recommended for the normal reference counting +* use case in which references are taken and released one at a time. In these +* cases, refcount_inc(), or one of its variants, should instead be used to +* increment a reference count. +*/ +static inline void refcount_add (int i,refcount_t *r) +{ +WARN_ONCE (!refcount_add_not_zero (i, r),"refcount_t: addition on 0; use-after-free.\n" ); +} + +/** +* refcount_inc_not_zero - increment a refcount unless it is 0 +* @r: the refcount to increment +* +* Similar to atomic_inc_not_zero(), but will saturate at REFCOUNT_SATURATED +* and WARN. +* +* Provides no memory ordering, it is assumed the caller has guaranteed the +* object memory to be stable (RCU, etc.). It does provide a control dependency +* and thereby orders future stores. See the comment on top. +* +* Return: true if the increment was successful, false otherwise +*/ +static inline __must_check bool refcount_inc_not_zero (refcount_t *r) +{ +unsigned int new, val =atomic_read (&r->refs); + +do { + new = val +1 ; -extern __must_check bool refcount_inc_not_zero (refcount_t *r); -extern void refcount_inc (refcount_t *r); +if (!val) +return false; -extern __must_check bool refcount_sub_and_test (int i,refcount_t *r); +if (unlikely (!new)) +return true; -extern __must_check bool refcount_dec_and_test (refcount_t *r); -extern void refcount_dec (refcount_t *r); + }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); + +WARN_ONCE (new ==REFCOUNT_SATURATED , +"refcount_t: saturated; leaking memory.\n" ); + +return true; +} + +/** +* refcount_inc - increment a refcount +* @r: the refcount to increment +* +* Similar to atomic_inc(), but will saturate at REFCOUNT_SATURATED and WARN. +* +* Provides no memory ordering, it is assumed the caller already has a +* reference on the object. +* +* Will WARN if the refcount is 0, as this represents a possible use-after-free +* condition. +*/ +static inline void refcount_inc (refcount_t *r) +{ +WARN_ONCE (!refcount_inc_not_zero (r),"refcount_t: increment on 0; use-after-free.\n" ); +} + +/** +* refcount_sub_and_test - subtract from a refcount and test if it is 0 +* @i: amount to subtract from the refcount +* @r: the refcount +* +* Similar to atomic_dec_and_test(), but it will WARN, return false and +* ultimately leak on underflow and will fail to decrement when saturated +* at REFCOUNT_SATURATED. +* +* Provides release memory ordering, such that prior loads and stores are done +* before, and provides an acquire ordering on success such that free() +* must come after. +* +* Use of this function is not recommended for the normal reference counting +* use case in which references are taken and released one at a time. In these +* cases, refcount_dec(), or one of its variants, should instead be used to +* decrement a reference count. +* +* Return: true if the resulting refcount is 0, false otherwise +*/ +static inline __must_check bool refcount_sub_and_test (int i,refcount_t *r) +{ +unsigned int new, val =atomic_read (&r->refs); + +do { +if (unlikely (val ==REFCOUNT_SATURATED )) +return false; + + new = val - i; +if (new > val) { +WARN_ONCE (new > val,"refcount_t: underflow; use-after-free.\n" ); +return false; + } + + }while (!atomic_try_cmpxchg_release (&r->refs, &val, new)); + +if (!new) { +smp_acquire__after_ctrl_dep (); +return true; + } +return false; + +} + +/** +* refcount_dec_and_test - decrement a refcount and test if it is 0 +* @r: the refcount +* +* Similar to atomic_dec_and_test(), it will WARN on underflow and fail to +* decrement when saturated at REFCOUNT_SATURATED. +* +* Provides release memory ordering, such that prior loads and stores are done +* before, and provides an acquire ordering on success such that free() +* must come after. +* +* Return: true if the resulting refcount is 0, false otherwise +*/ +static inline __must_check bool refcount_dec_and_test (refcount_t *r) +{ +return refcount_sub_and_test (1 , r); +} + +/** +* refcount_dec - decrement a refcount +* @r: the refcount +* +* Similar to atomic_dec(), it will WARN on underflow and fail to decrement +* when saturated at REFCOUNT_SATURATED. +* +* Provides release memory ordering, such that prior loads and stores are done +* before. +*/ +static inline void refcount_dec (refcount_t *r) +{ +WARN_ONCE (refcount_dec_and_test (r),"refcount_t: decrement hit 0; leaking memory.\n" ); +} -#else +#else /* CONFIG_REFCOUNT_FULL */ #define REFCOUNT_MAX INT_MAX#define REFCOUNT_SATURATED (INT_MIN / 2)
@@ -103,7 +322,7 @@ static inline void refcount_dec(refcount_t *r)atomic_dec (&r->refs); }# endif /* !CONFIG_ARCH_HAS_REFCOUNT */ -#endif /* CONFIG_REFCOUNT_FULL */ +#endif /* !CONFIG_REFCOUNT_FULL */ extern __must_check bool refcount_dec_if_one (refcount_t *r);extern __must_check bool refcount_dec_not_one (refcount_t *r);
lib/refcount.c +1 -237
249 lines not on this page · raw message
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
[tip: locking/core] locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
The following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: 77e9971c79c29542ab7dd4140f9343bf2ff36158 Gitweb: https://git.kernel.org/tip/77e9971c79c29542ab7dd4140f9343bf2ff36158 Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:58:56 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:15:06 +01:00
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
In an effort to improve performance of the REFCOUNT_FULL implementation, move the bulk of its functions into linux/refcount.h. This allows them to be inlined in the same way as if they had been provided via CONFIG_ARCH_HAS_REFCOUNT.
--- include/linux/refcount.h | 237 ++++++++++++++++++++++++++++++++++++-- lib/refcount.c | 238 +-------------------------------------- 2 files changed, 229 insertions(+), 246 deletions(-)
include/linux/refcount.h +228 -9
@@ -45,22 +45,241 @@ static inline unsigned int refcount_read(const refcount_t *r) }#ifdef CONFIG_REFCOUNT_FULL +#include <linux/bug.h> #define REFCOUNT_MAX (UINT_MAX - 1)#define REFCOUNT_SATURATED UINT_MAX -extern __must_check bool refcount_add_not_zero (int i,refcount_t *r); -extern void refcount_add (int i,refcount_t *r); +/* +* Variant of atomic_t specialized for reference counts. +* +* The interface matches the atomic_t interface (to aid in porting) but only +* provides the few functions one should use for reference counting. +* +* It differs in that the counter saturates at REFCOUNT_SATURATED and will not +* move once there. This avoids wrapping the counter and causing 'spurious' +* use-after-free issues. +* +* Memory ordering rules are slightly relaxed wrt regular atomic_t functions +* and provide only what is strictly required for refcounts. +* +* The increments are fully relaxed; these will not provide ordering. The +* rationale is that whatever is used to obtain the object we're increasing the +* reference count on will provide the ordering. For locked data structures, +* its the lock acquire, for RCU/lockless data structures its the dependent +* load. +* +* Do note that inc_not_zero() provides a control dependency which will order +* future stores against the inc, this ensures we'll never modify the object +* if we did not in fact acquire a reference. +* +* The decrements will provide release order, such that all the prior loads and +* stores will be issued before, it also provides a control dependency, which +* will order us against the subsequent free(). +* +* The control dependency is against the load of the cmpxchg (ll/sc) that +* succeeded. This means the stores aren't fully ordered, but this is fine +* because the 1->0 transition indicates no concurrency. +* +* Note that the allocator is responsible for ordering things between free() +* and alloc(). +* +* The decrements dec_and_test() and sub_and_test() also provide acquire +* ordering on success. +* +*/ + +/** +* refcount_add_not_zero - add a value to a refcount unless it is 0 +* @i: the value to add to the refcount +* @r: the refcount +* +* Will saturate at REFCOUNT_SATURATED and WARN. +* +* Provides no memory ordering, it is assumed the caller has guaranteed the +* object memory to be stable (RCU, etc.). It does provide a control dependency +* and thereby orders future stores. See the comment on top. +* +* Use of this function is not recommended for the normal reference counting +* use case in which references are taken and released one at a time. In these +* cases, refcount_inc(), or one of its variants, should instead be used to +* increment a reference count. +* +* Return: false if the passed refcount is 0, true otherwise +*/ +static inline __must_check bool refcount_add_not_zero (int i,refcount_t *r) +{ +unsigned int new, val =atomic_read (&r->refs); + +do { +if (!val) +return false; + +if (unlikely (val ==REFCOUNT_SATURATED )) +return true; + + new = val + i; +if (new < val) + new =REFCOUNT_SATURATED ; + + }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); + +WARN_ONCE (new ==REFCOUNT_SATURATED , +"refcount_t: saturated; leaking memory.\n" ); + +return true; +} + +/** +* refcount_add - add a value to a refcount +* @i: the value to add to the refcount +* @r: the refcount +* +* Similar to atomic_add(), but will saturate at REFCOUNT_SATURATED and WARN. +* +* Provides no memory ordering, it is assumed the caller has guaranteed the +* object memory to be stable (RCU, etc.). It does provide a control dependency +* and thereby orders future stores. See the comment on top. +* +* Use of this function is not recommended for the normal reference counting +* use case in which references are taken and released one at a time. In these +* cases, refcount_inc(), or one of its variants, should instead be used to +* increment a reference count. +*/ +static inline void refcount_add (int i,refcount_t *r) +{ +WARN_ONCE (!refcount_add_not_zero (i, r),"refcount_t: addition on 0; use-after-free.\n" ); +} + +/** +* refcount_inc_not_zero - increment a refcount unless it is 0 +* @r: the refcount to increment +* +* Similar to atomic_inc_not_zero(), but will saturate at REFCOUNT_SATURATED +* and WARN. +* +* Provides no memory ordering, it is assumed the caller has guaranteed the +* object memory to be stable (RCU, etc.). It does provide a control dependency +* and thereby orders future stores. See the comment on top. +* +* Return: true if the increment was successful, false otherwise +*/ +static inline __must_check bool refcount_inc_not_zero (refcount_t *r) +{ +unsigned int new, val =atomic_read (&r->refs); + +do { + new = val +1 ; -extern __must_check bool refcount_inc_not_zero (refcount_t *r); -extern void refcount_inc (refcount_t *r); +if (!val) +return false; -extern __must_check bool refcount_sub_and_test (int i,refcount_t *r); +if (unlikely (!new)) +return true; -extern __must_check bool refcount_dec_and_test (refcount_t *r); -extern void refcount_dec (refcount_t *r); + }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); + +WARN_ONCE (new ==REFCOUNT_SATURATED , +"refcount_t: saturated; leaking memory.\n" ); + +return true; +} + +/** +* refcount_inc - increment a refcount +* @r: the refcount to increment +* +* Similar to atomic_inc(), but will saturate at REFCOUNT_SATURATED and WARN. +* +* Provides no memory ordering, it is assumed the caller already has a +* reference on the object. +* +* Will WARN if the refcount is 0, as this represents a possible use-after-free +* condition. +*/ +static inline void refcount_inc (refcount_t *r) +{ +WARN_ONCE (!refcount_inc_not_zero (r),"refcount_t: increment on 0; use-after-free.\n" ); +} + +/** +* refcount_sub_and_test - subtract from a refcount and test if it is 0 +* @i: amount to subtract from the refcount +* @r: the refcount +* +* Similar to atomic_dec_and_test(), but it will WARN, return false and +* ultimately leak on underflow and will fail to decrement when saturated +* at REFCOUNT_SATURATED. +* +* Provides release memory ordering, such that prior loads and stores are done +* before, and provides an acquire ordering on success such that free() +* must come after. +* +* Use of this function is not recommended for the normal reference counting +* use case in which references are taken and released one at a time. In these +* cases, refcount_dec(), or one of its variants, should instead be used to +* decrement a reference count. +* +* Return: true if the resulting refcount is 0, false otherwise +*/ +static inline __must_check bool refcount_sub_and_test (int i,refcount_t *r) +{ +unsigned int new, val =atomic_read (&r->refs); + +do { +if (unlikely (val ==REFCOUNT_SATURATED )) +return false; + + new = val - i; +if (new > val) { +WARN_ONCE (new > val,"refcount_t: underflow; use-after-free.\n" ); +return false; + } + + }while (!atomic_try_cmpxchg_release (&r->refs, &val, new)); + +if (!new) { +smp_acquire__after_ctrl_dep (); +return true; + } +return false; + +} + +/** +* refcount_dec_and_test - decrement a refcount and test if it is 0 +* @r: the refcount +* +* Similar to atomic_dec_and_test(), it will WARN on underflow and fail to +* decrement when saturated at REFCOUNT_SATURATED. +* +* Provides release memory ordering, such that prior loads and stores are done +* before, and provides an acquire ordering on success such that free() +* must come after. +* +* Return: true if the resulting refcount is 0, false otherwise +*/ +static inline __must_check bool refcount_dec_and_test (refcount_t *r) +{ +return refcount_sub_and_test (1 , r); +} + +/** +* refcount_dec - decrement a refcount +* @r: the refcount +* +* Similar to atomic_dec(), it will WARN on underflow and fail to decrement +* when saturated at REFCOUNT_SATURATED. +* +* Provides release memory ordering, such that prior loads and stores are done +* before. +*/ +static inline void refcount_dec (refcount_t *r) +{ +WARN_ONCE (refcount_dec_and_test (r),"refcount_t: decrement hit 0; leaking memory.\n" ); +} -#else +#else /* CONFIG_REFCOUNT_FULL */ #define REFCOUNT_MAX INT_MAX#define REFCOUNT_SATURATED (INT_MIN / 2)
@@ -103,7 +322,7 @@ static inline void refcount_dec(refcount_t *r)atomic_dec (&r->refs); }# endif /* !CONFIG_ARCH_HAS_REFCOUNT */ -#endif /* CONFIG_REFCOUNT_FULL */ +#endif /* !CONFIG_REFCOUNT_FULL */ extern __must_check bool refcount_dec_if_one (refcount_t *r);extern __must_check bool refcount_dec_not_one (refcount_t *r);
lib/refcount.c +1 -237
249 lines not on this page · raw message
Will Deacon
maintainerPATCH RESEND v4 5/10 lib/refcount: Improve performance of generic REFCOUNT_FULL code
In reply to Will DeaconRewrite the generic REFCOUNT_FULL implementation so that the saturation point is moved to INT_MIN / 2. This allows us to defer the sanity checks until after the atomic operation, which removes many uses of cmpxchg() in favour of atomic_fetch_{add,sub}().
Some crude perf results obtained from lkdtm show substantially less overhead, despite the checking:
$ perf stat -r 3 -B -- echo {ATOMIC,REFCOUNT}_TIMING >/sys/kernel/debug/provoke-crash/DIRECT# arm64 ATOMIC_TIMING: 46.50451 +- 0.00134 seconds time elapsed ( +- 0.00% ) REFCOUNT_TIMING (REFCOUNT_FULL, mainline): 77.57522 +- 0.00982 seconds time elapsed ( +- 0.01% ) REFCOUNT_TIMING (REFCOUNT_FULL, this series): 48.7181 +- 0.0256 seconds time elapsed ( +- 0.05% )
# x86 ATOMIC_TIMING: 31.6225 +- 0.0776 seconds time elapsed ( +- 0.25% ) REFCOUNT_TIMING (!REFCOUNT_FULL, mainline/x86 asm): 31.6689 +- 0.0901 seconds time elapsed ( +- 0.28% ) REFCOUNT_TIMING (REFCOUNT_FULL, mainline): 53.203 +- 0.138 seconds time elapsed ( +- 0.26% ) REFCOUNT_TIMING (REFCOUNT_FULL, this series): 31.7408 +- 0.0486 seconds time elapsed ( +- 0.15% )
--- include/linux/refcount.h | 131 ++++++++++++++++++++++----------------- 1 file changed, 75 insertions(+), 56 deletions(-)
include/linux/refcount.h +75 -56
@@ -47,8 +47,8 @@ static inline unsigned int refcount_read(const refcount_t *r)#ifdef CONFIG_REFCOUNT_FULL #include <linux/bug.h> -#define REFCOUNT_MAX (UINT_MAX - 1) -#define REFCOUNT_SATURATED UINT_MAX +#define REFCOUNT_MAX INT_MAX +#define REFCOUNT_SATURATED (INT_MIN / 2)/* * Variant of atomic_t specialized for reference counts.
@@ -56,9 +56,47 @@ static inline unsigned int refcount_read(const refcount_t *r)* The interface matches the atomic_t interface (to aid in porting) but only * provides the few functions one should use for reference counting. * -* It differs in that the counter saturates at REFCOUNT_SATURATED and will not -* move once there. This avoids wrapping the counter and causing 'spurious' -* use-after-free issues. +* Saturation semantics +* ==================== +* +* refcount_t differs from atomic_t in that the counter saturates at +* REFCOUNT_SATURATED and will not move once there. This avoids wrapping the +* counter and causing 'spurious' use-after-free issues. In order to avoid the +* cost associated with introducing cmpxchg() loops into all of the saturating +* operations, we temporarily allow the counter to take on an unchecked value +* and then explicitly set it to REFCOUNT_SATURATED on detecting that underflow +* or overflow has occurred. Although this is racy when multiple threads +* access the refcount concurrently, by placing REFCOUNT_SATURATED roughly +* equidistant from 0 and INT_MAX we minimise the scope for error: +* +* INT_MAX REFCOUNT_SATURATED UINT_MAX +* 0 (0x7fff_ffff) (0xc000_0000) (0xffff_ffff) +* +--------------------------------+----------------+----------------+ +* <---------- bad value! ----------> +* +* (in a signed view of the world, the "bad value" range corresponds to +* a negative counter value). +* +* As an example, consider a refcount_inc() operation that causes the counter +* to overflow: +* +* int old = atomic_fetch_add_relaxed(r); +* // old is INT_MAX, refcount now INT_MIN (0x8000_0000) +* if (old < 0) +* atomic_set(r, REFCOUNT_SATURATED); +* +* If another thread also performs a refcount_inc() operation between the two +* atomic operations, then the count will continue to edge closer to 0. If it +* reaches a value of 1 before /any/ of the threads reset it to the saturated +* value, then a concurrent refcount_dec_and_test() may erroneously free the +* underlying object. Given the precise timing details involved with the +* round-robin scheduling of each thread manipulating the refcount and the need +* to hit the race multiple times in succession, there doesn't appear to be a +* practical avenue of attack even if using refcount_add() operations with +* larger increments. +* +* Memory ordering +* =============== * * Memory ordering rules are slightly relaxed wrt regular atomic_t functions * and provide only what is strictly required for refcounts.
@@ -109,25 +147,19 @@ static inline unsigned int refcount_read(const refcount_t *r)*/ static inline __must_check bool refcount_add_not_zero (int i,refcount_t *r) { -unsigned int new, val =atomic_read (&r->refs); +int old =refcount_read (r);do { -if (!val) -return false; - -if (unlikely (val ==REFCOUNT_SATURATED )) -return true; - - new = val + i; -if (new < val) - new =REFCOUNT_SATURATED ; +if (!old) +break ; + }while (!atomic_try_cmpxchg_relaxed (&r->refs, &old, old + i)); - }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); - -WARN_ONCE (new ==REFCOUNT_SATURATED , -"refcount_t: saturated; leaking memory.\n" ); +if (unlikely (old <0 || old + i <0 )) { +refcount_set (r,REFCOUNT_SATURATED ); +WARN_ONCE (1 ,"refcount_t: saturated; leaking memory.\n" ); + } -return true; +return old; }/**
@@ -148,7 +180,13 @@ static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r)*/ static inline void refcount_add (int i,refcount_t *r) { -WARN_ONCE (!refcount_add_not_zero (i, r),"refcount_t: addition on 0; use-after-free.\n" ); +int old =atomic_fetch_add_relaxed (i, &r->refs); + +WARN_ONCE (!old,"refcount_t: addition on 0; use-after-free.\n" ); +if (unlikely (old <=0 || old + i <=0 )) { +refcount_set (r,REFCOUNT_SATURATED ); +WARN_ONCE (old,"refcount_t: saturated; leaking memory.\n" ); + } }/**
@@ -166,23 +204,7 @@ static inline void refcount_add(int i, refcount_t *r)*/ static inline __must_check bool refcount_inc_not_zero (refcount_t *r) { -unsigned int new, val =atomic_read (&r->refs); - -do { - new = val +1 ; - -if (!val) -return false; - -if (unlikely (!new)) -return true; - - }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); - -WARN_ONCE (new ==REFCOUNT_SATURATED , -"refcount_t: saturated; leaking memory.\n" ); - -return true; +return refcount_add_not_zero (1 , r); }/**
@@ -199,7 +221,7 @@ static inline __must_check bool refcount_inc_not_zero(refcount_t *r)*/ static inline void refcount_inc (refcount_t *r) { -WARN_ONCE (!refcount_inc_not_zero (r),"refcount_t: increment on 0; use-after-free.\n" ); +refcount_add (1 , r); }/**
@@ -224,26 +246,19 @@ static inline void refcount_inc(refcount_t *r)*/ static inline __must_check bool refcount_sub_and_test (int i,refcount_t *r) { -unsigned int new, val =atomic_read (&r->refs); - -do { -if (unlikely (val ==REFCOUNT_SATURATED )) -return false; +int old =atomic_fetch_sub_release (i, &r->refs); - new = val - i; -if (new > val) { -WARN_ONCE (new > val,"refcount_t: underflow; use-after-free.\n" ); -return false; - } - - }while (!atomic_try_cmpxchg_release (&r->refs, &val, new)); - -if (!new) { +if (old == i) {smp_acquire__after_ctrl_dep ();return true; } -return false; +if (unlikely (old <0 || old - i <0 )) { +refcount_set (r,REFCOUNT_SATURATED ); +WARN_ONCE (1 ,"refcount_t: underflow; use-after-free.\n" ); + } + +return false; }/**
@@ -276,9 +291,13 @@ static inline __must_check bool refcount_dec_and_test(refcount_t *r)*/ static inline void refcount_dec (refcount_t *r) { -WARN_ONCE (refcount_dec_and_test (r),"refcount_t: decrement hit 0; leaking memory.\n" ); -} +int old =atomic_fetch_sub_release (1 , &r->refs); +if (unlikely (old <=1 )) { +refcount_set (r,REFCOUNT_SATURATED ); +WARN_ONCE (1 ,"refcount_t: decrement hit 0; leaking memory.\n" ); + } +}#else /* CONFIG_REFCOUNT_FULL */ #define REFCOUNT_MAX INT_MAX
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
[tip: locking/core] locking/refcount: Improve performance of generic REFCOUNT_FULL code
The following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: dcb786493f3e48da3272b710028d42ec608cfda1 Gitweb: https://git.kernel.org/tip/dcb786493f3e48da3272b710028d42ec608cfda1 Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:58:57 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:15:10 +01:00
locking/refcount: Improve performance of generic REFCOUNT_FULL code
Rewrite the generic REFCOUNT_FULL implementation so that the saturation point is moved to INT_MIN / 2. This allows us to defer the sanity checks until after the atomic operation, which removes many uses of cmpxchg() in favour of atomic_fetch_{add,sub}().
Some crude perf results obtained from lkdtm show substantially less overhead, despite the checking:
$ perf stat -r 3 -B -- echo {ATOMIC,REFCOUNT}_TIMING >/sys/kernel/debug/provoke-crash/DIRECT# arm64 ATOMIC_TIMING: 46.50451 +- 0.00134 seconds time elapsed ( +- 0.00% ) REFCOUNT_TIMING (REFCOUNT_FULL, mainline): 77.57522 +- 0.00982 seconds time elapsed ( +- 0.01% ) REFCOUNT_TIMING (REFCOUNT_FULL, this series): 48.7181 +- 0.0256 seconds time elapsed ( +- 0.05% )
# x86 ATOMIC_TIMING: 31.6225 +- 0.0776 seconds time elapsed ( +- 0.25% ) REFCOUNT_TIMING (!REFCOUNT_FULL, mainline/x86 asm): 31.6689 +- 0.0901 seconds time elapsed ( +- 0.28% ) REFCOUNT_TIMING (REFCOUNT_FULL, mainline): 53.203 +- 0.138 seconds time elapsed ( +- 0.26% ) REFCOUNT_TIMING (REFCOUNT_FULL, this series): 31.7408 +- 0.0486 seconds time elapsed ( +- 0.15% )
--- include/linux/refcount.h | 131 +++++++++++++++++++++----------------- 1 file changed, 75 insertions(+), 56 deletions(-)
include/linux/refcount.h +75 -56
@@ -47,8 +47,8 @@ static inline unsigned int refcount_read(const refcount_t *r)#ifdef CONFIG_REFCOUNT_FULL #include <linux/bug.h> -#define REFCOUNT_MAX (UINT_MAX - 1) -#define REFCOUNT_SATURATED UINT_MAX +#define REFCOUNT_MAX INT_MAX +#define REFCOUNT_SATURATED (INT_MIN / 2)/* * Variant of atomic_t specialized for reference counts.
@@ -56,9 +56,47 @@ static inline unsigned int refcount_read(const refcount_t *r)* The interface matches the atomic_t interface (to aid in porting) but only * provides the few functions one should use for reference counting. * -* It differs in that the counter saturates at REFCOUNT_SATURATED and will not -* move once there. This avoids wrapping the counter and causing 'spurious' -* use-after-free issues. +* Saturation semantics +* ==================== +* +* refcount_t differs from atomic_t in that the counter saturates at +* REFCOUNT_SATURATED and will not move once there. This avoids wrapping the +* counter and causing 'spurious' use-after-free issues. In order to avoid the +* cost associated with introducing cmpxchg() loops into all of the saturating +* operations, we temporarily allow the counter to take on an unchecked value +* and then explicitly set it to REFCOUNT_SATURATED on detecting that underflow +* or overflow has occurred. Although this is racy when multiple threads +* access the refcount concurrently, by placing REFCOUNT_SATURATED roughly +* equidistant from 0 and INT_MAX we minimise the scope for error: +* +* INT_MAX REFCOUNT_SATURATED UINT_MAX +* 0 (0x7fff_ffff) (0xc000_0000) (0xffff_ffff) +* +--------------------------------+----------------+----------------+ +* <---------- bad value! ----------> +* +* (in a signed view of the world, the "bad value" range corresponds to +* a negative counter value). +* +* As an example, consider a refcount_inc() operation that causes the counter +* to overflow: +* +* int old = atomic_fetch_add_relaxed(r); +* // old is INT_MAX, refcount now INT_MIN (0x8000_0000) +* if (old < 0) +* atomic_set(r, REFCOUNT_SATURATED); +* +* If another thread also performs a refcount_inc() operation between the two +* atomic operations, then the count will continue to edge closer to 0. If it +* reaches a value of 1 before /any/ of the threads reset it to the saturated +* value, then a concurrent refcount_dec_and_test() may erroneously free the +* underlying object. Given the precise timing details involved with the +* round-robin scheduling of each thread manipulating the refcount and the need +* to hit the race multiple times in succession, there doesn't appear to be a +* practical avenue of attack even if using refcount_add() operations with +* larger increments. +* +* Memory ordering +* =============== * * Memory ordering rules are slightly relaxed wrt regular atomic_t functions * and provide only what is strictly required for refcounts.
@@ -109,25 +147,19 @@ static inline unsigned int refcount_read(const refcount_t *r)*/ static inline __must_check bool refcount_add_not_zero (int i,refcount_t *r) { -unsigned int new, val =atomic_read (&r->refs); +int old =refcount_read (r);do { -if (!val) -return false; - -if (unlikely (val ==REFCOUNT_SATURATED )) -return true; - - new = val + i; -if (new < val) - new =REFCOUNT_SATURATED ; +if (!old) +break ; + }while (!atomic_try_cmpxchg_relaxed (&r->refs, &old, old + i)); - }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); - -WARN_ONCE (new ==REFCOUNT_SATURATED , -"refcount_t: saturated; leaking memory.\n" ); +if (unlikely (old <0 || old + i <0 )) { +refcount_set (r,REFCOUNT_SATURATED ); +WARN_ONCE (1 ,"refcount_t: saturated; leaking memory.\n" ); + } -return true; +return old; }/**
@@ -148,7 +180,13 @@ static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r)*/ static inline void refcount_add (int i,refcount_t *r) { -WARN_ONCE (!refcount_add_not_zero (i, r),"refcount_t: addition on 0; use-after-free.\n" ); +int old =atomic_fetch_add_relaxed (i, &r->refs); + +WARN_ONCE (!old,"refcount_t: addition on 0; use-after-free.\n" ); +if (unlikely (old <=0 || old + i <=0 )) { +refcount_set (r,REFCOUNT_SATURATED ); +WARN_ONCE (old,"refcount_t: saturated; leaking memory.\n" ); + } }/**
@@ -166,23 +204,7 @@ static inline void refcount_add(int i, refcount_t *r)*/ static inline __must_check bool refcount_inc_not_zero (refcount_t *r) { -unsigned int new, val =atomic_read (&r->refs); - -do { - new = val +1 ; - -if (!val) -return false; - -if (unlikely (!new)) -return true; - - }while (!atomic_try_cmpxchg_relaxed (&r->refs, &val, new)); - -WARN_ONCE (new ==REFCOUNT_SATURATED , -"refcount_t: saturated; leaking memory.\n" ); - -return true; +return refcount_add_not_zero (1 , r); }/**
@@ -199,7 +221,7 @@ static inline __must_check bool refcount_inc_not_zero(refcount_t *r)*/ static inline void refcount_inc (refcount_t *r) { -WARN_ONCE (!refcount_inc_not_zero (r),"refcount_t: increment on 0; use-after-free.\n" ); +refcount_add (1 , r); }/**
@@ -224,26 +246,19 @@ static inline void refcount_inc(refcount_t *r)*/ static inline __must_check bool refcount_sub_and_test (int i,refcount_t *r) { -unsigned int new, val =atomic_read (&r->refs); - -do { -if (unlikely (val ==REFCOUNT_SATURATED )) -return false; +int old =atomic_fetch_sub_release (i, &r->refs); - new = val - i; -if (new > val) { -WARN_ONCE (new > val,"refcount_t: underflow; use-after-free.\n" ); -return false; - } - - }while (!atomic_try_cmpxchg_release (&r->refs, &val, new)); - -if (!new) { +if (old == i) {smp_acquire__after_ctrl_dep ();return true; } -return false; +if (unlikely (old <0 || old - i <0 )) { +refcount_set (r,REFCOUNT_SATURATED ); +WARN_ONCE (1 ,"refcount_t: underflow; use-after-free.\n" ); + } + +return false; }/**
@@ -276,9 +291,13 @@ static inline __must_check bool refcount_dec_and_test(refcount_t *r)*/ static inline void refcount_dec (refcount_t *r) { -WARN_ONCE (refcount_dec_and_test (r),"refcount_t: decrement hit 0; leaking memory.\n" ); -} +int old =atomic_fetch_sub_release (1 , &r->refs); +if (unlikely (old <=1 )) { +refcount_set (r,REFCOUNT_SATURATED ); +WARN_ONCE (1 ,"refcount_t: decrement hit 0; leaking memory.\n" ); + } +}#else /* CONFIG_REFCOUNT_FULL */ #define REFCOUNT_MAX INT_MAX
Re: [RESEND PATCH v4 05/10] lib/refcount: Improve performance of generic REFCOUNT_FULL code
In reply to Will DeaconQuoted 4 lines · Will Deacon
Rewrite the generic
REFCOUNT_FULLimplementation so that the saturation point is moved toINT_MIN/ 2. This allows us to defer the sanity checks until after the atomic operation, which removes many uses ofcmpxchg()in favour of atomic_fetch_{add,sub}().
Oh, I never saw this, this is really neat! CCing the kernel-hardening list on this might've been a good idea.
Quoted 20 lines
+ * Saturation semantics
+ * ====================
+ *
+ *refcount_tdiffers fromatomic_tin that the counter saturates at
+ *REFCOUNT_SATURATEDand will not move once there. This avoids wrapping the
+ * counter and causing 'spurious' use-after-free issues. In order to avoid the
+ * cost associated with introducingcmpxchg()loops into all of the saturating
+ * operations, we temporarily allow the counter to take on an unchecked value
+ * and then explicitly set it toREFCOUNT_SATURATEDon detecting that underflow
+ * or overflow has occurred. Although this is racy when multiple threads
+ * access the refcount concurrently, by placingREFCOUNT_SATURATEDroughly
+ * equidistant from 0 andINT_MAXwe minimise the scope for error:
+ *
+ *INT_MAXREFCOUNT_SATURATEDUINT_MAX
+ * 0 (0x7fff_ffff) (0xc000_0000) (0xffff_ffff)
+ * +--------------------------------+----------------+----------------+
+ * <---------- bad value! ---------->
+ *
+ * (in a signed view of the world, the "bad value" range corresponds to
+ * a negative counter value).
[...]
Quoted 9 lines
+ * If another thread also performs a
refcount_inc()operation between the two
+ * atomic operations, then the count will continue to edge closer to 0. If it
+ * reaches a value of 1 before /any/ of the threads reset it to the saturated
+ * value, then a concurrentrefcount_dec_and_test()may erroneously free the
+ * underlying object. Given the precise timing details involved with the
+ * round-robin scheduling of each thread manipulating the refcount and the need
+ * to hit the race multiple times in succession, there doesn't appear to be a
+ * practical avenue of attack even if usingrefcount_add()operations with
+ * larger increments.
On top of that, the number of threads that can actually be running at a given time is capped. See include/linux/threads.h, where it is capped to pow(2, 22):
/*
* A maximum of 4 million PIDs should be enough for a while.
* [NOTE: PID/TIDs are limited to 2^29 ~= 500+ million, see futex.h.]
*/
#define PID_MAX_LIMIT (CONFIG_BASE_SMALL ? PAGE_SIZE * 8 : \
(sizeof(long) > 4 ? 4 * 1024 * 1024 : PID_MAX_DEFAULT))And in the futex UAPI header, we have this, baking a TID limit into the userspace API (note that this is pow(2,30), not pow(2,29) as the comment in threads.h claims - I'm not sure where that difference comes from):
/*
* The rest of the robust-futex field is for the TID:
*/
#define FUTEX_TID_MASK 0x3fffffffSo AFAICS, with the current PID_MAX_LIMIT, if you assume that all participating refcount operations are non-batched (delta 1) and the attacker can't cause the threads to oops in the middle of the refcount operation (maybe that would be possible if you managed to find something like a NULL pointer dereference in perf software event code and had perf paranoia at <=1 , or something like that? - I'm not sure), then even in a theoretical scenario where an attacker spawns the maximum number of tasks possible and manages to get all of them to sequentially preempt while being in the middle of increment operations in several nested contexts (I'm not sure whether that can even happen
- you're not going to take typical sleeping exceptions like page faults in the middle of a refcount op), the attacker will stay comfortably inside the saturated range. Even if the PID_MAX_LIMIT is at some point raised to the maximum permitted by the futex UAPI, this still holds as long as you assume no nesting. Hm, should I send a patch to add something like this to the explanatory comment?
Of course, if someone uses refcount batching with sufficiently large values, those guarantees go out of the window - if we wanted to be perfectionist about this, we could make the batched operations do slow cmpxchg stuff while letting the much more performance-critical single-reference case continue to use the fast saturation scheme. OTOH, the networking folks would probably hate that, since they're using the batched ops for ->sk_wmem_alloc stuff, where they count bytes as references? So I guess maybe we should leave it as-is.
Will Deacon
maintainerRe: [RESEND PATCH v4 05/10] lib/refcount: Improve performance of generic REFCOUNT_FULL code
Hi Jann,
Quoted 8 lines · Jann Horn
Quoted 4 lines · Will Deacon
Rewrite the generic
REFCOUNT_FULLimplementation so that the saturation point is moved toINT_MIN/ 2. This allows us to defer the sanity checks until after the atomic operation, which removes many uses ofcmpxchg()in favour of atomic_fetch_{add,sub}().Oh, I never saw this, this is really neat! CCing the kernel-hardening list on this might've been a good idea.
Glad you like it! I'll try to remember to cc them in future but get_maintainer.pl doesn't tend to mention them very often.
Quoted 31 lines
Quoted 9 lines
+ * If another thread also performs a
refcount_inc()operation between the two
+ * atomic operations, then the count will continue to edge closer to 0. If it
+ * reaches a value of 1 before /any/ of the threads reset it to the saturated
+ * value, then a concurrentrefcount_dec_and_test()may erroneously free the
+ * underlying object. Given the precise timing details involved with the
+ * round-robin scheduling of each thread manipulating the refcount and the need
+ * to hit the race multiple times in succession, there doesn't appear to be a
+ * practical avenue of attack even if usingrefcount_add()operations with
+ * larger increments.On top of that, the number of threads that can actually be running at a given time is capped. See
include/linux/threads.h, where it is capped topow(2, 22):/* * A maximum of 4 million PIDs should be enough for a while. * [NOTE: PID/TIDs are limited to 2^29 ~= 500+ million, see futex.h.] */ #define PID_MAX_LIMIT (CONFIG_BASE_SMALL ? PAGE_SIZE * 8 : \ (sizeof(long) > 4 ? 4 * 1024 * 1024 : PID_MAX_DEFAULT))And in the futex UAPI header, we have this, baking a TID limit into the userspace API (note that this is
pow(2,30), notpow(2,29)as the comment inthreads.hclaims - I'm not sure where that difference comes from):/* * The rest of the robust-futex field is for the TID: */ #define FUTEX_TID_MASK 0x3fffffff
Quoted 16 lines
So AFAICS, with the current
PID_MAX_LIMIT, if you assume that all participating refcount operations are non-batched (delta 1) and the attacker can't cause the threads to oops in the middle of the refcount operation (maybe that would be possible if you managed to find something like a NULL pointer dereference in perf software event code and had perf paranoia at <=1 , or something like that? - I'm not sure), then even in a theoretical scenario where an attacker spawns the maximum number of tasks possible and manages to get all of them to sequentially preempt while being in the middle of increment operations in several nested contexts (I'm not sure whether that can even happen
- you're not going to take typical sleeping exceptions like page faults in the middle of a refcount op), the attacker will stay comfortably inside the saturated range. Even if thePID_MAX_LIMITis at some point raised to the maximum permitted by the futex UAPI, this still holds as long as you assume no nesting. Hm, should I send a patch to add something like this to the explanatory comment?
Sure, I'd be happy to improve the document by adding this -- please send out a patch for review. It's probably also worth mentioning the batching use-cases, although I struggle to reason about the window between the {under,over}flow occuring and saturation. The idea of oopsing during that period is interesting, although at least that's not silent (and I think Android usually (always?) sets panic_on_oops to 1.
Quoted 8 lines
Of course, if someone uses refcount batching with sufficiently large values, those guarantees go out of the window - if we wanted to be perfectionist about this, we could make the batched operations do slow cmpxchg stuff while letting the much more performance-critical single-reference case continue to use the fast saturation scheme. OTOH, the networking folks would probably hate that, since they're using the batched ops for ->sk_wmem_alloc stuff, where they count bytes as references? So I guess maybe we should leave it as-is.
Agreed. If we hamper the performance here, then people will either look to disable the checking or they will switch to atomic_t, which puts us back to square one. Perfection is the enemy of the good and all that.
Having said that, I'd still be keen to learn about any practical attacks on this in case there is something smart we can do to mitigate them without cmpxchg(). For example, one silly approach might be to bound the maximum increment and split larger ones up using a loop.
Will
Re: [RESEND PATCH v4 05/10] lib/refcount: Improve performance of generic REFCOUNT_FULL code
Quoted 50 lines · Will Deacon
Quoted 32 lines · Jann Horn
Quoted 9 lines · Will Deacon
+ * If another thread also performs a
refcount_inc()operation between the two
+ * atomic operations, then the count will continue to edge closer to 0. If it
+ * reaches a value of 1 before /any/ of the threads reset it to the saturated
+ * value, then a concurrentrefcount_dec_and_test()may erroneously free the
+ * underlying object. Given the precise timing details involved with the
+ * round-robin scheduling of each thread manipulating the refcount and the need
+ * to hit the race multiple times in succession, there doesn't appear to be a
+ * practical avenue of attack even if usingrefcount_add()operations with
+ * larger increments.On top of that, the number of threads that can actually be running at a given time is capped. See
include/linux/threads.h, where it is capped topow(2, 22):/* * A maximum of 4 million PIDs should be enough for a while. * [NOTE: PID/TIDs are limited to 2^29 ~= 500+ million, see futex.h.] */ #define PID_MAX_LIMIT (CONFIG_BASE_SMALL ? PAGE_SIZE * 8 : \ (sizeof(long) > 4 ? 4 * 1024 * 1024 : PID_MAX_DEFAULT))And in the futex UAPI header, we have this, baking a TID limit into the userspace API (note that this is
pow(2,30), notpow(2,29)as the comment inthreads.hclaims - I'm not sure where that difference comes from):/* * The rest of the robust-futex field is for the TID: */ #define FUTEX_TID_MASK 0x3fffffffQuoted 16 lines
So AFAICS, with the current
PID_MAX_LIMIT, if you assume that all participating refcount operations are non-batched (delta 1) and the attacker can't cause the threads to oops in the middle of the refcount operation (maybe that would be possible if you managed to find something like a NULL pointer dereference in perf software event code and had perf paranoia at <=1 , or something like that? - I'm not sure), then even in a theoretical scenario where an attacker spawns the maximum number of tasks possible and manages to get all of them to sequentially preempt while being in the middle of increment operations in several nested contexts (I'm not sure whether that can even happen
- you're not going to take typical sleeping exceptions like page faults in the middle of a refcount op), the attacker will stay comfortably inside the saturated range. Even if thePID_MAX_LIMITis at some point raised to the maximum permitted by the futex UAPI, this still holds as long as you assume no nesting. Hm, should I send a patch to add something like this to the explanatory comment?
Quoted 4 lines
Sure, I'd be happy to improve the document by adding this -- please send out a patch for review. It's probably also worth mentioning the batching use-cases, although I struggle to reason about the window between the {under,over}flow occuring and saturation.
In the overflow case, it's fine, right? If you briefly crossed into the saturation range and then went back down, using some tasks with half-completed refcounting operations, then the refcount is still behaving as a correct non-saturating refcount. (And it can't cross over to the other end of the saturation range, because that's twice as much distance as you'd need to unpin a saturated refcount.)
And in the underflow case, we can't deterministically protect anyway without some external mechanism to protect the object's lifetime while someone is already freeing it - so that's pretty much just a best-effort thing anyway.
Quoted 9 lines
Quoted 8 lines
Of course, if someone uses refcount batching with sufficiently large values, those guarantees go out of the window - if we wanted to be perfectionist about this, we could make the batched operations do slow cmpxchg stuff while letting the much more performance-critical single-reference case continue to use the fast saturation scheme. OTOH, the networking folks would probably hate that, since they're using the batched ops for ->sk_wmem_alloc stuff, where they count bytes as references? So I guess maybe we should leave it as-is.
Quoted 8 lines
Agreed. If we hamper the performance here, then people will either look to disable the checking or they will switch to
atomic_t, which puts us back to square one. Perfection is the enemy of the good and all that.Having said that, I'd still be keen to learn about any practical attacks on this in case there is something smart we can do to mitigate them without
cmpxchg(). For example, one silly approach might be to bound the maximum increment and split larger ones up using a loop.
I guess that'd do the job. I don't know whether it's worth the trouble in practice though.
Will Deacon
maintainerPATCH RESEND v4 6/10 lib/refcount: Move saturation warnings out of line
In reply to Will DeaconHaving the refcount saturation and warnings inline bloats the text, despite the fact that these paths should never be executed in normal operation.
Move the refcount saturation and warnings out of line to reduce the image size when refcount_t checking is enabled. Relative to an x86_64 defconfig, the sizes reported by bloat-o-meter are:
# defconfig+REFCOUNT_FULL, inline saturation (i.e. before this patch)
Total: Before=14762076, After=14915442, chg +1.04%
# defconfig+REFCOUNT_FULL, out-of-line saturation (i.e. after this patch)
Total: Before=14762076, After=14835497, chg +0.50%
A side-effect of this change is that we now only get one warning per refcount saturation type, rather than one per problematic call-site.
--- include/linux/refcount.h | 39 ++++++++++++++++++++------------------- lib/refcount.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 48 insertions(+), 19 deletions(-)
include/linux/refcount.h +20 -19
@@ -23,6 +23,16 @@ typedef struct refcount_struct {#define REFCOUNT_INIT (n) { .refs = ATOMIC_INIT(n), } +enum refcount_saturation_type { +REFCOUNT_ADD_NOT_ZERO_OVF , +REFCOUNT_ADD_OVF , +REFCOUNT_ADD_UAF , +REFCOUNT_SUB_UAF , +REFCOUNT_DEC_LEAK , +}; + +void refcount_warn_saturate (refcount_t *r,enum refcount_saturation_type t); +/** * refcount_set - set a refcount's value * @r: the refcount
@@ -154,10 +164,8 @@ static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r)break ; }while (!atomic_try_cmpxchg_relaxed (&r->refs, &old, old + i)); -if (unlikely (old <0 || old + i <0 )) { -refcount_set (r,REFCOUNT_SATURATED ); -WARN_ONCE (1 ,"refcount_t: saturated; leaking memory.\n" ); - } +if (unlikely (old <0 || old + i <0 )) +refcount_warn_saturate (r,REFCOUNT_ADD_NOT_ZERO_OVF );return old; }
@@ -182,11 +190,10 @@ static inline void refcount_add(int i, refcount_t *r) {int old =atomic_fetch_add_relaxed (i, &r->refs); -WARN_ONCE (!old,"refcount_t: addition on 0; use-after-free.\n" ); -if (unlikely (old <=0 || old + i <=0 )) { -refcount_set (r,REFCOUNT_SATURATED ); -WARN_ONCE (old,"refcount_t: saturated; leaking memory.\n" ); - } +if (unlikely (!old)) +refcount_warn_saturate (r,REFCOUNT_ADD_UAF ); +else if (unlikely (old <0 || old + i <0 )) +refcount_warn_saturate (r,REFCOUNT_ADD_OVF ); }/**
@@ -253,10 +260,8 @@ static inline __must_check bool refcount_sub_and_test(int i, refcount_t *r)return true; } -if (unlikely (old <0 || old - i <0 )) { -refcount_set (r,REFCOUNT_SATURATED ); -WARN_ONCE (1 ,"refcount_t: underflow; use-after-free.\n" ); - } +if (unlikely (old <0 || old - i <0 )) +refcount_warn_saturate (r,REFCOUNT_SUB_UAF );return false; }
@@ -291,12 +296,8 @@ static inline __must_check bool refcount_dec_and_test(refcount_t *r)*/ static inline void refcount_dec (refcount_t *r) { -int old =atomic_fetch_sub_release (1 , &r->refs); - -if (unlikely (old <=1 )) { -refcount_set (r,REFCOUNT_SATURATED ); -WARN_ONCE (1 ,"refcount_t: decrement hit 0; leaking memory.\n" ); - } +if (unlikely (atomic_fetch_sub_release (1 , &r->refs) <=1 )) +refcount_warn_saturate (r,REFCOUNT_DEC_LEAK ); }#else /* CONFIG_REFCOUNT_FULL */
lib/refcount.c +28 -0
@@ -8,6 +8,34 @@#include <linux/spinlock.h> #include <linux/bug.h> +#define REFCOUNT_WARN (str) WARN_ONCE(1, "refcount_t: " str ".\n") + +void refcount_warn_saturate (refcount_t *r,enum refcount_saturation_type t) +{ +refcount_set (r,REFCOUNT_SATURATED ); + +switch (t) { +case REFCOUNT_ADD_NOT_ZERO_OVF : +REFCOUNT_WARN ("saturated; leaking memory" ); +break ; +case REFCOUNT_ADD_OVF : +REFCOUNT_WARN ("saturated; leaking memory" ); +break ; +case REFCOUNT_ADD_UAF : +REFCOUNT_WARN ("addition on 0; use-after-free" ); +break ; +case REFCOUNT_SUB_UAF : +REFCOUNT_WARN ("underflow; use-after-free" ); +break ; +case REFCOUNT_DEC_LEAK : +REFCOUNT_WARN ("decrement hit 0; leaking memory" ); +break ; +default : +REFCOUNT_WARN ("unknown saturation event!?" ); + } +} +EXPORT_SYMBOL (refcount_warn_saturate); +/** * refcount_dec_if_one - decrement a refcount if it is 1 * @r: the refcount
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
[tip: locking/core] locking/refcount: Move saturation warnings out of line
The following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: 1eb085d94256aaa69b00cf5a86e3c5f5bb2bc460 Gitweb: https://git.kernel.org/tip/1eb085d94256aaa69b00cf5a86e3c5f5bb2bc460 Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:58:58 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:15:21 +01:00
locking/refcount: Move saturation warnings out of line
Having the refcount saturation and warnings inline bloats the text, despite the fact that these paths should never be executed in normal operation.
Move the refcount saturation and warnings out of line to reduce the image size when refcount_t checking is enabled. Relative to an x86_64 defconfig, the sizes reported by bloat-o-meter are:
# defconfig+REFCOUNT_FULL, inline saturation (i.e. before this patch)
Total: Before=14762076, After=14915442, chg +1.04%
# defconfig+REFCOUNT_FULL, out-of-line saturation (i.e. after this patch)
Total: Before=14762076, After=14835497, chg +0.50%
A side-effect of this change is that we now only get one warning per refcount saturation type, rather than one per problematic call-site.
--- include/linux/refcount.h | 39 ++++++++++++++++++++------------------- lib/refcount.c | 28 ++++++++++++++++++++++++++++- 2 files changed, 48 insertions(+), 19 deletions(-)
include/linux/refcount.h +20 -19
@@ -23,6 +23,16 @@ typedef struct refcount_struct {#define REFCOUNT_INIT (n) { .refs = ATOMIC_INIT(n), } +enum refcount_saturation_type { +REFCOUNT_ADD_NOT_ZERO_OVF , +REFCOUNT_ADD_OVF , +REFCOUNT_ADD_UAF , +REFCOUNT_SUB_UAF , +REFCOUNT_DEC_LEAK , +}; + +void refcount_warn_saturate (refcount_t *r,enum refcount_saturation_type t); +/** * refcount_set - set a refcount's value * @r: the refcount
@@ -154,10 +164,8 @@ static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r)break ; }while (!atomic_try_cmpxchg_relaxed (&r->refs, &old, old + i)); -if (unlikely (old <0 || old + i <0 )) { -refcount_set (r,REFCOUNT_SATURATED ); -WARN_ONCE (1 ,"refcount_t: saturated; leaking memory.\n" ); - } +if (unlikely (old <0 || old + i <0 )) +refcount_warn_saturate (r,REFCOUNT_ADD_NOT_ZERO_OVF );return old; }
@@ -182,11 +190,10 @@ static inline void refcount_add(int i, refcount_t *r) {int old =atomic_fetch_add_relaxed (i, &r->refs); -WARN_ONCE (!old,"refcount_t: addition on 0; use-after-free.\n" ); -if (unlikely (old <=0 || old + i <=0 )) { -refcount_set (r,REFCOUNT_SATURATED ); -WARN_ONCE (old,"refcount_t: saturated; leaking memory.\n" ); - } +if (unlikely (!old)) +refcount_warn_saturate (r,REFCOUNT_ADD_UAF ); +else if (unlikely (old <0 || old + i <0 )) +refcount_warn_saturate (r,REFCOUNT_ADD_OVF ); }/**
@@ -253,10 +260,8 @@ static inline __must_check bool refcount_sub_and_test(int i, refcount_t *r)return true; } -if (unlikely (old <0 || old - i <0 )) { -refcount_set (r,REFCOUNT_SATURATED ); -WARN_ONCE (1 ,"refcount_t: underflow; use-after-free.\n" ); - } +if (unlikely (old <0 || old - i <0 )) +refcount_warn_saturate (r,REFCOUNT_SUB_UAF );return false; }
@@ -291,12 +296,8 @@ static inline __must_check bool refcount_dec_and_test(refcount_t *r)*/ static inline void refcount_dec (refcount_t *r) { -int old =atomic_fetch_sub_release (1 , &r->refs); - -if (unlikely (old <=1 )) { -refcount_set (r,REFCOUNT_SATURATED ); -WARN_ONCE (1 ,"refcount_t: decrement hit 0; leaking memory.\n" ); - } +if (unlikely (atomic_fetch_sub_release (1 , &r->refs) <=1 )) +refcount_warn_saturate (r,REFCOUNT_DEC_LEAK ); }#else /* CONFIG_REFCOUNT_FULL */
lib/refcount.c +28 -0
@@ -8,6 +8,34 @@#include <linux/spinlock.h> #include <linux/bug.h> +#define REFCOUNT_WARN (str) WARN_ONCE(1, "refcount_t: " str ".\n") + +void refcount_warn_saturate (refcount_t *r,enum refcount_saturation_type t) +{ +refcount_set (r,REFCOUNT_SATURATED ); + +switch (t) { +case REFCOUNT_ADD_NOT_ZERO_OVF : +REFCOUNT_WARN ("saturated; leaking memory" ); +break ; +case REFCOUNT_ADD_OVF : +REFCOUNT_WARN ("saturated; leaking memory" ); +break ; +case REFCOUNT_ADD_UAF : +REFCOUNT_WARN ("addition on 0; use-after-free" ); +break ; +case REFCOUNT_SUB_UAF : +REFCOUNT_WARN ("underflow; use-after-free" ); +break ; +case REFCOUNT_DEC_LEAK : +REFCOUNT_WARN ("decrement hit 0; leaking memory" ); +break ; +default : +REFCOUNT_WARN ("unknown saturation event!?" ); + } +} +EXPORT_SYMBOL (refcount_warn_saturate); +/** * refcount_dec_if_one - decrement a refcount if it is 1 * @r: the refcount
Will Deacon
maintainerPATCH RESEND v4 7/10 lib/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
In reply to Will DeaconThe definitions of REFCOUNT_MAX and REFCOUNT_SATURATED are the same, regardless of CONFIG_REFCOUNT_FULL, so consolidate them into a single pair of definitions.
--- include/linux/refcount.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
include/linux/refcount.h +2 -7
@@ -22,6 +22,8 @@ typedef struct refcount_struct { } refcount_t;#define REFCOUNT_INIT (n) { .refs = ATOMIC_INIT(n), } +#define REFCOUNT_MAX INT_MAX +#define REFCOUNT_SATURATED (INT_MIN / 2)enum refcount_saturation_type {REFCOUNT_ADD_NOT_ZERO_OVF ,
@@ -57,9 +59,6 @@ static inline unsigned int refcount_read(const refcount_t *r)#ifdef CONFIG_REFCOUNT_FULL #include <linux/bug.h> -#define REFCOUNT_MAX INT_MAX -#define REFCOUNT_SATURATED (INT_MIN / 2) -/* * Variant of atomic_t specialized for reference counts. *
@@ -300,10 +299,6 @@ static inline void refcount_dec(refcount_t *r) refcount_warn_saturate(r, REFCOUNT_DEC_LEAK); }#else /* CONFIG_REFCOUNT_FULL */ - -#define REFCOUNT_MAX INT_MAX -#define REFCOUNT_SATURATED (INT_MIN / 2) -# ifdef CONFIG_ARCH_HAS_REFCOUNT # include <asm/refcount.h> # else
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
[tip: locking/core] locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
The following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: 65b008552469f1c37f5e06e0016924502e40b4f5 Gitweb: https://git.kernel.org/tip/65b008552469f1c37f5e06e0016924502e40b4f5 Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:58:59 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:15:27 +01:00
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
The definitions of REFCOUNT_MAX and REFCOUNT_SATURATED are the same, regardless of CONFIG_REFCOUNT_FULL, so consolidate them into a single pair of definitions.
--- include/linux/refcount.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
include/linux/refcount.h +2 -7
@@ -22,6 +22,8 @@ typedef struct refcount_struct { } refcount_t;#define REFCOUNT_INIT (n) { .refs = ATOMIC_INIT(n), } +#define REFCOUNT_MAX INT_MAX +#define REFCOUNT_SATURATED (INT_MIN / 2)enum refcount_saturation_type {REFCOUNT_ADD_NOT_ZERO_OVF ,
@@ -57,9 +59,6 @@ static inline unsigned int refcount_read(const refcount_t *r)#ifdef CONFIG_REFCOUNT_FULL #include <linux/bug.h> -#define REFCOUNT_MAX INT_MAX -#define REFCOUNT_SATURATED (INT_MIN / 2) -/* * Variant of atomic_t specialized for reference counts. *
@@ -300,10 +299,6 @@ static inline void refcount_dec(refcount_t *r) refcount_warn_saturate(r, REFCOUNT_DEC_LEAK); }#else /* CONFIG_REFCOUNT_FULL */ - -#define REFCOUNT_MAX INT_MAX -#define REFCOUNT_SATURATED (INT_MIN / 2) -# ifdef CONFIG_ARCH_HAS_REFCOUNT # include <asm/refcount.h> # else
Will Deacon
maintainerPATCH RESEND v4 8/10 refcount: Consolidate implementations of refcount_t
In reply to Will DeaconThe generic implementation of refcount_t should be good enough for everybody, so remove ARCH_HAS_REFCOUNT and REFCOUNT_FULL entirely, leaving the generic implementation enabled unconditionally.
--- arch/Kconfig | 21 ---- arch/arm/Kconfig | 1 - arch/arm64/Kconfig | 1 - arch/s390/configs/debug_defconfig | 1 - arch/x86/Kconfig | 1 - arch/x86/include/asm/asm.h | 6 -- arch/x86/include/asm/refcount.h | 126 ----------------------- arch/x86/mm/extable.c | 49 --------- drivers/gpu/drm/i915/Kconfig.debug | 1 - include/linux/refcount.h | 158 +++++++++++------------------ lib/refcount.c | 2 +- 11 files changed, 59 insertions(+), 308 deletions(-) delete mode 100644 arch/x86/include/asm/refcount.h
arch/Kconfig +0 -21
@@ -892,27 +892,6 @@ config STRICT_MODULE_RWX config ARCH_HAS_PHYS_TO_DMA bool -config ARCH_HAS_REFCOUNT - bool - help - An architecture selects this when it has implemented refcount_t - using open coded assembly primitives that provide an optimized - refcount_t implementation, possibly at the expense of some full - refcount state checks of CONFIG_REFCOUNT_FULL=y. - - The refcount overflow check behavior, however, must be retained. - Catching overflows is the primary security concern for protecting - against bugs in reference counts. - -config REFCOUNT_FULL - bool "Perform full reference count validation at the expense of speed" - help - Enabling this switches the refcounting infrastructure from a fast - unchecked atomic_t implementation to a fully state checked - implementation, which can be (slightly) slower but provides protections - against various use-after-free conditions that can be used in - security flaw exploits. - config HAVE_ARCH_COMPILER_H bool help
arch/arm/Kconfig +0 -1
@@ -117,7 +117,6 @@ config ARM select OLD_SIGSUSPEND3 select PCI_SYSCALL if PCI select PERF_USE_VMALLOC - select REFCOUNT_FULL select RTC_LIB select SYS_SUPPORTS_APM_EMULATION # Above selects are sorted alphabetically; please add new ones
arch/arm64/Kconfig +0 -1
@@ -181,7 +181,6 @@ config ARM64 select PCI_SYSCALL if PCI select POWER_RESET select POWER_SUPPLY - select REFCOUNT_FULL select SPARSE_IRQ select SWIOTLB select SYSCTL_EXCEPTION_TRACE
arch/s390/configs/debug_defconfig +0 -1
@@ -62,7 +62,6 @@ CONFIG_OPROFILE=m CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y CONFIG_STATIC_KEYS_SELFTEST=y -CONFIG_REFCOUNT_FULL=y CONFIG_LOCK_EVENT_COUNTS=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y
arch/x86/Kconfig +0 -1
@@ -73,7 +73,6 @@ config X86 select ARCH_HAS_PMEM_API if X86_64 select ARCH_HAS_PTE_DEVMAP if X86_64 select ARCH_HAS_PTE_SPECIAL - select ARCH_HAS_REFCOUNT select ARCH_HAS_UACCESS_FLUSHCACHE if X86_64 select ARCH_HAS_UACCESS_MCSAFE if X86_64 && X86_MCE select ARCH_HAS_SET_MEMORY
arch/x86/include/asm/asm.h +0 -6
@@ -139,9 +139,6 @@# define _ASM_EXTABLE_EX (from, to) \ _ASM_EXTABLE_HANDLE(from, to, ex_handler_ext) -# define _ASM_EXTABLE_REFCOUNT (from, to) \ - _ASM_EXTABLE_HANDLE(from, to, ex_handler_refcount) -# define _ASM_NOKPROBE (entry) \ .pushsection "_kprobe_blacklist","aw" ; \ _ASM_ALIGN ; \
@@ -170,9 +167,6 @@# define _ASM_EXTABLE_EX (from, to) \ _ASM_EXTABLE_HANDLE(from, to, ex_handler_ext) -# define _ASM_EXTABLE_REFCOUNT (from, to) \ - _ASM_EXTABLE_HANDLE(from, to, ex_handler_refcount) -/* For C file, we already have NOKPROBE_SYMBOL macro */ #endif
arch/x86/include/asm/refcount.h deleted +0 -126
126 lines not on this page · raw message
arch/x86/mm/extable.c +0 -49
55 lines not on this page · raw message
drivers/gpu/drm/i915/Kconfig.debug +0 -1
@@ -22,7 +22,6 @@ config DRM_I915_DEBUG depends on DRM_I915 select DEBUG_FS select PREEMPT_COUNT - select REFCOUNT_FULL select I2C_CHARDEV select STACKDEPOT select DRM_DP_AUX_CHARDEV
include/linux/refcount.h +58 -100
174 lines not on this page · raw message
lib/refcount.c +1 -1
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 /* -* Out-of-line refcount functions common to all refcount implementations. +* Out-of-line refcount functions. */ #include <linux/mutex.h>
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
[tip: locking/core] locking/refcount: Consolidate implementations of refcount_t
The following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: fb041bb7c0a918b95c6889fc965cdc4a75b4c0ca Gitweb: https://git.kernel.org/tip/fb041bb7c0a918b95c6889fc965cdc4a75b4c0ca Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:59:00 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:15:32 +01:00
locking/refcount: Consolidate implementations of refcount_t
The generic implementation of refcount_t should be good enough for everybody, so remove ARCH_HAS_REFCOUNT and REFCOUNT_FULL entirely, leaving the generic implementation enabled unconditionally.
--- arch/Kconfig | 21 +---- arch/arm/Kconfig | 1 +- arch/arm64/Kconfig | 1 +- arch/s390/configs/debug_defconfig | 1 +- arch/x86/Kconfig | 1 +- arch/x86/include/asm/asm.h | 6 +- arch/x86/include/asm/refcount.h | 126 +---------------------- arch/x86/mm/extable.c | 49 +--------- drivers/gpu/drm/i915/Kconfig.debug | 1 +- include/linux/refcount.h | 158 ++++++++++------------------ lib/refcount.c | 2 +- 11 files changed, 59 insertions(+), 308 deletions(-) delete mode 100644 arch/x86/include/asm/refcount.h
arch/Kconfig +0 -21
@@ -892,27 +892,6 @@ config STRICT_MODULE_RWX config ARCH_HAS_PHYS_TO_DMA bool -config ARCH_HAS_REFCOUNT - bool - help - An architecture selects this when it has implemented refcount_t - using open coded assembly primitives that provide an optimized - refcount_t implementation, possibly at the expense of some full - refcount state checks of CONFIG_REFCOUNT_FULL=y. - - The refcount overflow check behavior, however, must be retained. - Catching overflows is the primary security concern for protecting - against bugs in reference counts. - -config REFCOUNT_FULL - bool "Perform full reference count validation at the expense of speed" - help - Enabling this switches the refcounting infrastructure from a fast - unchecked atomic_t implementation to a fully state checked - implementation, which can be (slightly) slower but provides protections - against various use-after-free conditions that can be used in - security flaw exploits. - config HAVE_ARCH_COMPILER_H bool help
arch/arm/Kconfig +0 -1
@@ -117,7 +117,6 @@ config ARM select OLD_SIGSUSPEND3 select PCI_SYSCALL if PCI select PERF_USE_VMALLOC - select REFCOUNT_FULL select RTC_LIB select SYS_SUPPORTS_APM_EMULATION # Above selects are sorted alphabetically; please add new ones
arch/arm64/Kconfig +0 -1
@@ -181,7 +181,6 @@ config ARM64 select PCI_SYSCALL if PCI select POWER_RESET select POWER_SUPPLY - select REFCOUNT_FULL select SPARSE_IRQ select SWIOTLB select SYSCTL_EXCEPTION_TRACE
arch/s390/configs/debug_defconfig +0 -1
@@ -62,7 +62,6 @@ CONFIG_OPROFILE=m CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y CONFIG_STATIC_KEYS_SELFTEST=y -CONFIG_REFCOUNT_FULL=y CONFIG_LOCK_EVENT_COUNTS=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y
arch/x86/Kconfig +0 -1
@@ -73,7 +73,6 @@ config X86 select ARCH_HAS_PMEM_API if X86_64 select ARCH_HAS_PTE_DEVMAP if X86_64 select ARCH_HAS_PTE_SPECIAL - select ARCH_HAS_REFCOUNT select ARCH_HAS_UACCESS_FLUSHCACHE if X86_64 select ARCH_HAS_UACCESS_MCSAFE if X86_64 && X86_MCE select ARCH_HAS_SET_MEMORY
arch/x86/include/asm/asm.h +0 -6
@@ -139,9 +139,6 @@# define _ASM_EXTABLE_EX (from, to) \ _ASM_EXTABLE_HANDLE(from, to, ex_handler_ext) -# define _ASM_EXTABLE_REFCOUNT (from, to) \ - _ASM_EXTABLE_HANDLE(from, to, ex_handler_refcount) -# define _ASM_NOKPROBE (entry) \ .pushsection "_kprobe_blacklist","aw" ; \ _ASM_ALIGN ; \
@@ -170,9 +167,6 @@# define _ASM_EXTABLE_EX (from, to) \ _ASM_EXTABLE_HANDLE(from, to, ex_handler_ext) -# define _ASM_EXTABLE_REFCOUNT (from, to) \ - _ASM_EXTABLE_HANDLE(from, to, ex_handler_refcount) -/* For C file, we already have NOKPROBE_SYMBOL macro */ #endif
arch/x86/include/asm/refcount.h deleted +0 -126
126 lines not on this page · raw message
arch/x86/mm/extable.c +0 -49
55 lines not on this page · raw message
drivers/gpu/drm/i915/Kconfig.debug +0 -1
@@ -22,7 +22,6 @@ config DRM_I915_DEBUG depends on DRM_I915 select DEBUG_FS select PREEMPT_COUNT - select REFCOUNT_FULL select I2C_CHARDEV select STACKDEPOT select DRM_DP_AUX_CHARDEV
include/linux/refcount.h +58 -100
174 lines not on this page · raw message
lib/refcount.c +1 -1
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 /* -* Out-of-line refcount functions common to all refcount implementations. +* Out-of-line refcount functions. */ #include <linux/mutex.h>
kernel test robot
build bot[refcount] d2d337b185: WARNING:at_lib/refcount.c:#refcount_warn_saturate
In reply to Will DeaconFYI, we noticed the following commit (built with gcc-7):
FYI, we noticed the following commit (built with gcc-7):
commit: d2d337b185bd2abff262f3cf7de0080b3888e41c ("[RESEND PATCH v4 08/10] refcount: Consolidate implementations of refcount_t")
url: https://github.com/0day-ci/linux/commits/Will-Deacon/Rework-REFCOUNT_FULL-using-atomic_fetch_-operations/20191124-052413
in testcase: ocfs2test
with following parameters:
disk: 1SSD
test: test-mkfs
on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 8G
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
+-----------------------------------------------------------------------------+------------+------------+ | | 2ab80bd4ae | d2d337b185 | +-----------------------------------------------------------------------------+------------+------------+ | boot_successes | 0 | 0 | | boot_failures | 24 | 24 | | BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/rwsem.c | 24 | 24 | | stack_segment:#[##] | 6 | 6 | | RIP:__kmalloc | 8 | 6 | | Kernel_panic-not_syncing:Fatal_exception | 14 | 11 | | kernel_BUG_at_mm/slub.c | 9 | 4 | | invalid_opcode:#[##] | 9 | 4 | | RIP:kfree | 9 | 4 | | RIP:native_safe_halt | 4 | 1 | | Kernel_panic-not_syncing:Fatal_exception_in_interrupt | 6 | 2 | | BUG:unable_to_handle_page_fault_for_address | 5 | 1 | | Oops:#[##] | 5 | 1 | | RIP:kmem_cache_alloc_trace | 3 | 3 | | RIP:idr_get_free | 1 | | | RIP:console_unlock | 1 | | | WARNING:at_lib/refcount.c:#refcount_warn_saturate | 0 | 9 | | RIP:refcount_warn_saturate | 0 | 9 | | general_protection_fault:#[##] | 0 | 2 | | RIP:lru_cache_add_active_or_unevictable | 0 | 1 | +-----------------------------------------------------------------------------+------------+------------+
If you fix the issue, kindly add following tag
[ 93.421220] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1533 [ 93.423478] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2464, name: mount.ocfs2 [ 93.425258] CPU: 1 PID: 2464 Comm: mount.ocfs2 Not tainted 5.4.0-rc3-00012-gd2d337b185bd2 #1 [ 93.428185] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 93.430982] Call Trace: [ 93.432691] dump_stack+0x5c/0x7b [ 93.434089] ___might_sleep+0x102/0x120 [ 93.435629] down_write+0x1c/0x50 [ 93.436962] configfs_depend_item+0x3a/0xb0 [ 93.438580] o2hb_region_pin+0xf9/0x180 [ocfs2_nodemanager] [ 93.440630] ? inode_doinit_with_dentry+0x250/0x4e0 [ 93.441860] o2hb_register_callback+0xc6/0x2a0 [ocfs2_nodemanager] [ 93.443298] dlm_join_domain+0xbd/0x790 [ocfs2_dlm] [ 93.444491] ? debugfs_create_dir+0xc4/0x100 [ 93.445635] ? dlm_alloc_ctxt+0x42f/0x560 [ocfs2_dlm] [ 93.446905] dlm_register_domain+0x31f/0x440 [ocfs2_dlm] [ 93.448188] ? _cond_resched+0x19/0x30 [ 93.449248] o2cb_cluster_connect+0x132/0x2c0 [ocfs2_stack_o2cb] [ 93.450701] ocfs2_cluster_connect+0x14b/0x220 [ocfs2_stackglue] [ 93.452151] ocfs2_dlm_init+0x2e9/0x4b0 [ocfs2] [ 93.453379] ? ocfs2_init_node_maps+0x50/0x50 [ocfs2] [ 93.454700] ocfs2_fill_super+0xcf4/0x12a0 [ocfs2] [ 93.455952] ? ocfs2_initialize_super+0x1030/0x1030 [ocfs2] [ 93.457484] mount_bdev+0x173/0x1b0 [ 93.458543] legacy_get_tree+0x27/0x40 [ 93.459615] vfs_get_tree+0x25/0xc0 [ 93.460650] do_mount+0x715/0x9a0 [ 93.461697] ksys_mount+0x80/0xd0 [ 93.462728] __x64_sys_mount+0x21/0x30 [ 93.463802] do_syscall_64+0x5b/0x1d0 [ 93.464867] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 93.466224] RIP: 0033:0x7feaa42ee48a [ 93.467282] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d de f9 2a 00 f7 d8 64 89 01 48 [ 93.472861] RSP: 002b:00007ffec903d4e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 93.475973] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007feaa42ee48a [ 93.479041] RDX: 0000562b43aae3ee RSI: 0000562b444af0b0 RDI: 0000562b444af310 [ 93.481956] RBP: 00007ffec903d690 R08: 0000562b444af2b0 R09: 0000000000000020 [ 93.485084] R10: 0000000000000000 R11: 0000000000000206 R12: 00007ffec903d580 [ 93.488128] R13: 0000000000000000 R14: 0000562b444b0000 R15: 00007ffec903d500 [ 93.494821] o2dlm: Joining domain 58A89FF3B793441A83C86B6A7816B4AF [ 93.494822] ( [ 93.499229] 1 [ 93.501238] ) 1 nodes [ 93.509977] JBD2: Ignoring recovery information on journal [ 93.518913] ocfs2: Mounting device (8,0) on (node 1, slot 0) with ordered data mode. [ 94.541086] mount /dev/sda /mnt/ocfs2 /dev/sda 16515072 243712 16271360 2% /mnt/ocfs2 [ 94.541090] [ 94.546474] OK [ 94.546476] [ 94.550726] create testdir /mnt/ocfs2/20191130_125727 [ 94.550729] [ 94.713069] create 15890 files . [ 94.713072] [ 94.717547] [ 98.760820] o2dlm: Leaving domain 58A89FF3B793441A83C86B6A7816B4AF [ 98.828610] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 98.830929] floppy: error 10 while reading block 0 [ 99.561301] ocfs2: Unmounting device (8,0) on (node 1) [ 99.563700] ------------[ cut here ]------------ [ 99.566425] refcount_t: underflow; use-after-free. [ 99.569213] WARNING: CPU: 1 PID: 2531 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0 [ 99.574231] Modules linked in: ocfs2_stack_o2cb ocfs2_dlm ocfs2 ocfs2_nodemanager ocfs2_stackglue jbd2 sr_mod intel_rapl_msr cdrom ata_generic pata_acpi intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sd_mod sg bochs_drm ppdev drm_vram_helper ttm drm_kms_helper snd_pcm syscopyarea ata_piix sysfillrect aesni_intel sysimgblt snd_timer fb_sys_fops crypto_simd libata drm cryptd glue_helper snd soundcore pcspkr joydev serio_raw virtio_scsi i2c_piix4 floppy parport_pc parport ip_tables [ 99.593419] CPU: 1 PID: 2531 Comm: umount Tainted: G W 5.4.0-rc3-00012-gd2d337b185bd2 #1 [ 99.597311] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 99.604305] RIP: 0010:refcount_warn_saturate+0x8d/0xf0 [ 99.607073] Code: 05 ce 6f 37 01 01 e8 32 a0 c1 ff 0f 0b c3 80 3d c1 6f 37 01 00 75 ad 48 c7 c7 e0 9f 73 a5 c6 05 b1 6f 37 01 01 e8 13 a0 c1 ff <0f> 0b c3 80 3d a5 6f 37 01 00 75 8e 48 c7 c7 60 9f 73 a5 c6 05 95 [ 99.612363] RSP: 0018:ffffa895c0457e20 EFLAGS: 00010282 [ 99.613931] RAX: 0000000000000000 RBX: ffff8d07e654e000 RCX: 0000000000000000 [ 99.615800] RDX: ffff8d083fd27640 RSI: ffff8d083fd17778 RDI: ffff8d083fd17778 [ 99.617687] RBP: ffff8d07db479000 R08: 000000000000050a R09: 0000000000aaaaaa [ 99.619574] R10: ffffa895c0457c48 R11: ffff8d0817a4cf20 R12: ffffa895c0457e34 [ 99.621486] R13: ffff8d07e654e240 R14: ffff8d07e654e0c8 R15: 0000000000000000 [ 99.623382] FS: 00007f39e9509e40(0000) GS:ffff8d083fd00000(0000) knlGS:0000000000000000 [ 99.625452] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.627106] CR2: 00000000004216d0 CR3: 00000001d2bfe000 CR4: 00000000000406e0 [ 99.628995] Call Trace: [ 99.630127] ocfs2_dismount_volume+0x32a/0x3e0 [ocfs2] [ 99.631667] generic_shutdown_super+0x6c/0x120 [ 99.633102] kill_block_super+0x21/0x50 [ 99.634424] deactivate_locked_super+0x3f/0x70 [ 99.635843] cleanup_mnt+0xb8/0x150 [ 99.637130] task_work_run+0xa3/0xe0 [ 99.638407] exit_to_usermode_loop+0xeb/0xf0 [ 99.639827] do_syscall_64+0x1a7/0x1d0 [ 99.641185] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 99.643068] RIP: 0033:0x7f39e8dedd77 [ 99.644352] Code: 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 00 00 00 b8 a6 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f1 00 2b 00 f7 d8 64 89 01 48 [ 99.649122] RSP: 002b:00007fffc63b9bf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 99.651318] RAX: 0000000000000000 RBX: 0000557e0db2e080 RCX: 00007f39e8dedd77 [ 99.653282] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000557e0db2e260 [ 99.655401] RBP: 0000557e0db2e260 R08: 0000557e0db2f600 R09: 0000000000000015 [ 99.657366] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f39e92efe64 [ 99.659581] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fffc63b9e80 [ 99.661503] ---[ end trace eed33931ffa30ed0 ]---
To reproduce:
# build kernel cd linux cp config-5.4.0-rc3-00012-gd2d337b185bd2 .config make HOSTCC=gcc-7 CC=gcc-7 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules make HOSTCC=gcc-7 CC=gcc-7 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install cd <mod-install-dir> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
Thanks,
Rong Chen
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.4.0-rc3 Kernel Configuration
#
#
# Compiler: gcc-7 (Debian 7.5.0-1) 7.5.0
#CONFIG_CC_IS_GCC=yCONFIG_GCC_VERSION=70500CONFIG_CLANG_VERSION=0CONFIG_CC_CAN_LINK=yCONFIG_CC_HAS_ASM_GOTO=yCONFIG_CC_HAS_ASM_INLINE=yCONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=yCONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=yCONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_HEADER_TEST is not setCONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_BUILD_SALT=""CONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not setCONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_CROSS_MEMORY_ATTACH=yCONFIG_USELIB=yCONFIG_AUDIT=yCONFIG_HAVE_ARCH_AUDITSYSCALL=yCONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_MIGRATION=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_SIM=yCONFIG_IRQ_DOMAIN_HIERARCHY=yCONFIG_GENERIC_MSI_IRQ=yCONFIG_GENERIC_MSI_IRQ_DOMAIN=yCONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=yCONFIG_GENERIC_IRQ_RESERVATION_MODE=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_DATA=yCONFIG_ARCH_CLOCKSOURCE_INIT=yCONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not setCONFIG_NO_HZ_FULL=yCONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#CONFIG_VIRT_CPU_ACCOUNTING=yCONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not setCONFIG_HAVE_SCHED_AVG_IRQ=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not setCONFIG_SRCU=yCONFIG_TREE_SRCU=yCONFIG_TASKS_RCU=yCONFIG_RCU_STALL_COMMON=yCONFIG_RCU_NEED_SEGCBLIST=yCONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=yCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_LOG_CPU_MAX_BUF_SHIFT=12CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=yCONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=yCONFIG_ARCH_SUPPORTS_INT128=yCONFIG_NUMA_BALANCING=yCONFIG_NUMA_BALANCING_DEFAULT_ENABLED=yCONFIG_CGROUPS=yCONFIG_PAGE_COUNTER=yCONFIG_MEMCG=yCONFIG_MEMCG_SWAP=yCONFIG_MEMCG_SWAP_ENABLED=yCONFIG_MEMCG_KMEM=yCONFIG_BLK_CGROUP=yCONFIG_CGROUP_WRITEBACK=yCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_CFS_BANDWIDTH=yCONFIG_RT_GROUP_SCHED=yCONFIG_CGROUP_PIDS=yCONFIG_CGROUP_RDMA=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_HUGETLB=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_DEVICE=yCONFIG_CGROUP_CPUACCT=yCONFIG_CGROUP_PERF=yCONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not setCONFIG_SOCK_CGROUP_DATA=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=yCONFIG_CHECKPOINT_RESTORE=yCONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not setCONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_RD_XZ=yCONFIG_RD_LZO=yCONFIG_RD_LZ4=yCONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_HAVE_UID16=yCONFIG_SYSCTL_EXCEPTION_TRACE=yCONFIG_HAVE_PCSPKR_PLATFORM=yCONFIG_BPF=yCONFIG_EXPERT=yCONFIG_UID16=yCONFIG_MULTIUSER=yCONFIG_SGETMASK_SYSCALL=yCONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_FHANDLE=yCONFIG_POSIX_TIMERS=yCONFIG_PRINTK=yCONFIG_PRINTK_NMI=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_FUTEX_PI=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_IO_URING=yCONFIG_ADVISE_SYSCALLS=yCONFIG_MEMBARRIER=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_ABSOLUTE_PERCPU=yCONFIG_KALLSYMS_BASE_RELATIVE=yCONFIG_BPF_SYSCALL=yCONFIG_BPF_JIT_ALWAYS_ON=yCONFIG_USERFAULTFD=yCONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=yCONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not setCONFIG_EMBEDDED=yCONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not setCONFIG_SLUB_CPU_PARTIAL=yCONFIG_SYSTEM_DATA_VERIFICATION=yCONFIG_PROFILING=yCONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=yCONFIG_MMU=yCONFIG_ARCH_MMAP_RND_BITS_MIN=28 CONFIG_ARCH_MMAP_RND_BITS_MAX=32 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 CONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_FILTER_PGPROT=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_HAVE_INTEL_TXT=yCONFIG_X86_64_SMP=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_DYNAMIC_PHYSICAL_MASK=y CONFIG_PGTABLE_LEVELS=5 CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#CONFIG_ZONE_DMA=yCONFIG_SMP=yCONFIG_X86_FEATURE_NAMES=yCONFIG_X86_X2APIC=yCONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not setCONFIG_RETPOLINE=yCONFIG_X86_CPU_RESCTRL=yCONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not setCONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not setCONFIG_X86_INTEL_LPSS=yCONFIG_X86_AMD_PLATFORM_DEVICE=yCONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not setCONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not setCONFIG_HYPERVISOR_GUEST=yCONFIG_PARAVIRT=yCONFIG_PARAVIRT_XXL=y
# CONFIG_PARAVIRT_DEBUG is not setCONFIG_PARAVIRT_SPINLOCKS=yCONFIG_X86_HV_CALLBACK_VECTOR=yCONFIG_XEN=yCONFIG_XEN_PV=yCONFIG_XEN_PV_SMP=y
# CONFIG_XEN_DOM0 is not setCONFIG_XEN_PVHVM=yCONFIG_XEN_PVHVM_SMP=yCONFIG_XEN_512GB=yCONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not setCONFIG_KVM_GUEST=yCONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
# CONFIG_KVM_DEBUG_FS is not setCONFIG_PARAVIRT_TIME_ACCOUNTING=yCONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=6CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not setCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_HYGON=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_CPU_SUP_ZHAOXIN=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not setCONFIG_MAXSMP=yCONFIG_NR_CPUS_RANGE_BEGIN=8192CONFIG_NR_CPUS_RANGE_END=8192CONFIG_NR_CPUS_DEFAULT=8192CONFIG_NR_CPUS=8192CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=yCONFIG_SCHED_MC_PRIO=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCELOG_LEGACY=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=yCONFIG_X86_MCE_INJECT=mCONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#CONFIG_PERF_EVENTS_INTEL_UNCORE=yCONFIG_PERF_EVENTS_INTEL_RAPL=yCONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring
CONFIG_X86_16BIT=yCONFIG_X86_ESPFIX64=y CONFIG_X86_VSYSCALL_EMULATION=yCONFIG_I8K=mCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=yCONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_X86_5LEVEL=yCONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set CONFIG_NUMA=yCONFIG_AMD_NUMA=yCONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=10 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_X86_PMEM_LEGACY_DEVICE=y CONFIG_X86_PMEM_LEGACY=m CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=yCONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=yCONFIG_X86_SMAP=yCONFIG_X86_INTEL_UMIP=yCONFIG_X86_INTEL_MPX=y CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y CONFIG_EFI=yCONFIG_EFI_STUB=yCONFIG_EFI_MIXED=yCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_KEXEC_FILE=y CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set CONFIG_CRASH_DUMP=yCONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=yCONFIG_RANDOMIZE_BASE=yCONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_DYNAMIC_MEMORY_LAYOUT=y CONFIG_RANDOMIZE_MEMORY=y CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa CONFIG_HOTPLUG_CPU=y CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_MODIFY_LDT_SYSCALL=y CONFIG_HAVE_LIVEPATCH=yCONFIG_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=yCONFIG_USE_PERCPU_NUMA_NODE_ID=yCONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=yCONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=yCONFIG_ARCH_ENABLE_THP_MIGRATION=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not setCONFIG_HIBERNATE_CALLBACKS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM=yCONFIG_PM_DEBUG=yCONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not setCONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not setCONFIG_PM_TRACE=yCONFIG_PM_TRACE_RTC=yCONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not setCONFIG_ARCH_SUPPORTS_ACPI=yCONFIG_ACPI=yCONFIG_ACPI_LEGACY_TABLES_LOOKUP=yCONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=yCONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not setCONFIG_ACPI_SPCR_TABLE=yCONFIG_ACPI_LPIT=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not setCONFIG_ACPI_REV_OVERRIDE_POSSIBLE=yCONFIG_ACPI_EC_DEBUGFS=mCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not setCONFIG_ACPI_DOCK=yCONFIG_ACPI_CPU_FREQ_PSS=yCONFIG_ACPI_PROCESSOR_CSTATE=yCONFIG_ACPI_PROCESSOR_IDLE=yCONFIG_ACPI_CPPC_LIB=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_IPMI=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_PROCESSOR_AGGREGATOR=mCONFIG_ACPI_THERMAL=yCONFIG_ACPI_NUMA=yCONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=yCONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_PCI_SLOT=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=yCONFIG_ACPI_HOTPLUG_IOAPIC=yCONFIG_ACPI_SBS=mCONFIG_ACPI_HED=yCONFIG_ACPI_CUSTOM_METHOD=mCONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not setCONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
# CONFIG_ACPI_HMAT is not setCONFIG_HAVE_ACPI_APEI=yCONFIG_HAVE_ACPI_APEI_NMI=yCONFIG_ACPI_APEI=yCONFIG_ACPI_APEI_GHES=yCONFIG_ACPI_APEI_PCIEAER=yCONFIG_ACPI_APEI_MEMORY_FAILURE=yCONFIG_ACPI_APEI_EINJ=mCONFIG_ACPI_APEI_ERST_DEBUG=y
# CONFIG_DPTF_POWER is not setCONFIG_ACPI_WATCHDOG=yCONFIG_ACPI_EXTLOG=mCONFIG_ACPI_ADXL=y
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not setCONFIG_X86_PM_TIMER=yCONFIG_SFI=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#CONFIG_X86_INTEL_PSTATE=yCONFIG_X86_PCC_CPUFREQ=mCONFIG_X86_ACPI_CPUFREQ=mCONFIG_X86_ACPI_CPUFREQ_CPB=yCONFIG_X86_POWERNOW_K8=mCONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not setCONFIG_X86_P4_CLOCKMOD=m
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=m # end of CPU Frequency scaling
#
# CPU Idle
#CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not setCONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not setCONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#CONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_XEN=yCONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not setCONFIG_ISA_DMA_API=yCONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not setCONFIG_COMPAT_32=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
CONFIG_X86_DEV_DMA_OPS=y
#
# Firmware Drivers
#CONFIG_EDD=m
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DMIID=yCONFIG_DMI_SYSFS=yCONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=mCONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#CONFIG_EFI_VARS=yCONFIG_EFI_ESRT=yCONFIG_EFI_VARS_PSTORE=yCONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=yCONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not setCONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not setCONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=yCONFIG_UEFI_CPER_X86=yCONFIG_EFI_DEV_PATH_PARSER=yCONFIG_EFI_EARLYCON=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver # end of Firmware Drivers
CONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_HAVE_KVM_IRQFD=yCONFIG_HAVE_KVM_IRQ_ROUTING=yCONFIG_HAVE_KVM_EVENTFD=yCONFIG_KVM_MMIO=yCONFIG_KVM_ASYNC_PF=yCONFIG_HAVE_KVM_MSI=yCONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=yCONFIG_KVM_VFIO=yCONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=yCONFIG_KVM_COMPAT=yCONFIG_HAVE_KVM_IRQ_BYPASS=yCONFIG_HAVE_KVM_NO_POLL=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=mCONFIG_KVM_AMD=mCONFIG_KVM_AMD_SEV=yCONFIG_KVM_MMU_AUDIT=yCONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not setCONFIG_VHOST_VSOCK=mCONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# General architecture-dependent options
#CONFIG_CRASH_CORE=yCONFIG_KEXEC_CORE=yCONFIG_HOTPLUG_SMT=yCONFIG_OPROFILE=mCONFIG_OPROFILE_EVENT_MULTIPLEX=yCONFIG_HAVE_OPROFILE=yCONFIG_OPROFILE_NMI_TIMER=yCONFIG_KPROBES=yCONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not setCONFIG_OPTPROBES=yCONFIG_KPROBES_ON_FTRACE=yCONFIG_UPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_ARCH_USE_BUILTIN_BSWAP=yCONFIG_KRETPROBES=yCONFIG_USER_RETURN_NOTIFIER=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_KPROBES_ON_FTRACE=yCONFIG_HAVE_FUNCTION_ERROR_INJECTION=yCONFIG_HAVE_NMI=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_CONTIGUOUS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_ARCH_HAS_FORTIFY_SOURCE=yCONFIG_ARCH_HAS_SET_MEMORY=yCONFIG_ARCH_HAS_SET_DIRECT_MAP=yCONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=yCONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=yCONFIG_HAVE_ASM_MODVERSIONS=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_RSEQ=yCONFIG_HAVE_FUNCTION_ARG_ACCESS_API=yCONFIG_HAVE_CLK=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_PERF_EVENTS_NMI=yCONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=yCONFIG_HAVE_PERF_REGS=yCONFIG_HAVE_PERF_USER_STACK_DUMP=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=yCONFIG_HAVE_RCU_TABLE_FREE=yCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=yCONFIG_HAVE_ALIGNED_STRUCT_PAGE=yCONFIG_HAVE_CMPXCHG_LOCAL=yCONFIG_HAVE_CMPXCHG_DOUBLE=yCONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=yCONFIG_ARCH_WANT_OLD_COMPAT_IPC=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_SECCOMP_FILTER=yCONFIG_HAVE_ARCH_STACKLEAK=yCONFIG_HAVE_STACKPROTECTOR=yCONFIG_CC_HAS_STACKPROTECTOR_NONE=yCONFIG_STACKPROTECTOR=yCONFIG_STACKPROTECTOR_STRONG=yCONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=yCONFIG_HAVE_CONTEXT_TRACKING=yCONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=yCONFIG_HAVE_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_MOVE_PMD=yCONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=yCONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=yCONFIG_HAVE_ARCH_HUGE_VMAP=yCONFIG_ARCH_WANT_HUGE_PMD_SHARE=yCONFIG_HAVE_ARCH_SOFT_DIRTY=yCONFIG_HAVE_MOD_ARCH_SPECIFIC=yCONFIG_MODULES_USE_ELF_RELA=yCONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=yCONFIG_ARCH_HAS_ELF_RANDOMIZE=yCONFIG_HAVE_ARCH_MMAP_RND_BITS=yCONFIG_HAVE_EXIT_THREAD=yCONFIG_ARCH_MMAP_RND_BITS=28CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=yCONFIG_ARCH_MMAP_RND_COMPAT_BITS=8CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=yCONFIG_HAVE_COPY_THREAD_TLS=yCONFIG_HAVE_STACK_VALIDATION=yCONFIG_HAVE_RELIABLE_STACKTRACE=yCONFIG_OLD_SIGSUSPEND3=yCONFIG_COMPAT_OLD_SIGACTION=yCONFIG_64BIT_TIME=yCONFIG_COMPAT_32BIT_TIME=yCONFIG_HAVE_ARCH_VMAP_STACK=yCONFIG_VMAP_STACK=yCONFIG_ARCH_HAS_STRICT_KERNEL_RWX=yCONFIG_STRICT_KERNEL_RWX=yCONFIG_ARCH_HAS_STRICT_MODULE_RWX=yCONFIG_STRICT_MODULE_RWX=yCONFIG_HAVE_ARCH_PREL32_RELOCATIONS=yCONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not setCONFIG_ARCH_HAS_MEM_ENCRYPT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not setCONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_PLUGIN_HOSTCC="g++"CONFIG_HAVE_GCC_PLUGINS=yCONFIG_GCC_PLUGINS=y
#
# GCC plugins
#
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
# end of GCC plugins # end of General architecture-dependent options
CONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULE_SIG_FORMAT=yCONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set # CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=yCONFIG_BLOCK=yCONFIG_BLK_SCSI_REQUEST=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set CONFIG_BLK_DEBUG_FS=yCONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not setCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not setCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not setCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=yCONFIG_BLK_MQ_PCI=yCONFIG_BLK_MQ_VIRTIO=yCONFIG_BLK_PM=y
#
# IO Schedulers
#CONFIG_MQ_IOSCHED_DEADLINE=yCONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=yCONFIG_PADATA=yCONFIG_ASN1=yCONFIG_INLINE_SPIN_UNLOCK_IRQ=yCONFIG_INLINE_READ_UNLOCK=yCONFIG_INLINE_READ_UNLOCK_IRQ=yCONFIG_INLINE_WRITE_UNLOCK=yCONFIG_INLINE_WRITE_UNLOCK_IRQ=yCONFIG_ARCH_SUPPORTS_ATOMIC_RMW=yCONFIG_MUTEX_SPIN_ON_OWNER=yCONFIG_RWSEM_SPIN_ON_OWNER=yCONFIG_LOCK_SPIN_ON_OWNER=yCONFIG_ARCH_USE_QUEUED_SPINLOCKS=yCONFIG_QUEUED_SPINLOCKS=yCONFIG_ARCH_USE_QUEUED_RWLOCKS=yCONFIG_QUEUED_RWLOCKS=yCONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=yCONFIG_ARCH_HAS_SYSCALL_WRAPPER=yCONFIG_FREEZER=y
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_ELFCORE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=yCONFIG_BINFMT_SCRIPT=yCONFIG_BINFMT_MISC=mCONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#CONFIG_SELECT_MEMORY_MODEL=yCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_HAVE_MEMBLOCK_NODE_MAP=yCONFIG_HAVE_FAST_GUP=yCONFIG_MEMORY_ISOLATION=yCONFIG_HAVE_BOOTMEM_INFO_NODE=yCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not setCONFIG_MEMORY_HOTREMOVE=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MEMORY_BALLOON=yCONFIG_BALLOON_COMPACTION=yCONFIG_COMPACTION=yCONFIG_MIGRATION=yCONFIG_CONTIG_ALLOC=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=yCONFIG_MEMORY_FAILURE=yCONFIG_HWPOISON_INJECT=mCONFIG_TRANSPARENT_HUGEPAGE=yCONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not setCONFIG_ARCH_WANTS_THP_SWAP=yCONFIG_THP_SWAP=yCONFIG_TRANSPARENT_HUGE_PAGECACHE=yCONFIG_CLEANCACHE=yCONFIG_FRONTSWAP=yCONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not setCONFIG_CMA_AREAS=7CONFIG_MEM_SOFT_DIRTY=yCONFIG_ZSWAP=yCONFIG_ZPOOL=yCONFIG_ZBUD=y
# CONFIG_Z3FOLD is not setCONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not setCONFIG_GENERIC_EARLY_IOREMAP=yCONFIG_DEFERRED_STRUCT_PAGE_INIT=yCONFIG_IDLE_PAGE_TRACKING=yCONFIG_ARCH_HAS_PTE_DEVMAP=yCONFIG_ZONE_DEVICE=yCONFIG_DEV_PAGEMAP_OPS=y
# CONFIG_DEVICE_PRIVATE is not setCONFIG_FRAME_VECTOR=yCONFIG_ARCH_USES_HIGH_VMA_FLAGS=yCONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not setCONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=yCONFIG_COMPAT_NETLINK_MESSAGES=yCONFIG_NET_INGRESS=yCONFIG_NET_EGRESS=yCONFIG_SKB_EXTENSIONS=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_DIAG=mCONFIG_UNIX=yCONFIG_UNIX_SCM=yCONFIG_UNIX_DIAG=m
# CONFIG_TLS is not setCONFIG_XFRM=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not setCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=mCONFIG_NET_KEY_MIGRATE=y
# CONFIG_XDP_SOCKETS is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_FIB_TRIE_STATS=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_ROUTE_CLASSID=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE_DEMUX=mCONFIG_NET_IP_TUNNEL=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE_COMMON=yCONFIG_IP_MROUTE=yCONFIG_IP_MROUTE_MULTIPLE_TABLES=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=yCONFIG_SYN_COOKIES=yCONFIG_NET_IPVTI=mCONFIG_NET_UDP_TUNNEL=mCONFIG_NET_FOU=mCONFIG_NET_FOU_IP_TUNNELS=yCONFIG_INET_AH=mCONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not setCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not setCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not setCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=mCONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=mCONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not setCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not setCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_IPV6_VTI=mCONFIG_IPV6_SIT=mCONFIG_IPV6_SIT_6RD=yCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_GRE=mCONFIG_IPV6_FOU=mCONFIG_IPV6_FOU_TUNNEL=mCONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not setCONFIG_IPV6_MROUTE=yCONFIG_IPV6_MROUTE_MULTIPLE_TABLES=yCONFIG_IPV6_PIMSM_V2=yCONFIG_IPV6_SEG6_LWTUNNEL=y
# CONFIG_IPV6_SEG6_HMAC is not setCONFIG_IPV6_SEG6_BPF=yCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NET_PTP_CLASSIFY=yCONFIG_NETWORK_PHY_TIMESTAMPING=yCONFIG_NETFILTER=yCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_INGRESS=yCONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_FAMILY_BRIDGE=yCONFIG_NETFILTER_FAMILY_ARP=yCONFIG_NETFILTER_NETLINK_ACCT=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NETFILTER_NETLINK_OSF=mCONFIG_NF_CONNTRACK=mCONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not setCONFIG_NETFILTER_CONNCOUNT=mCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_ZONES=yCONFIG_NF_CONNTRACK_PROCFS=yCONFIG_NF_CONNTRACK_EVENTS=yCONFIG_NF_CONNTRACK_TIMEOUT=yCONFIG_NF_CONNTRACK_TIMESTAMP=yCONFIG_NF_CONNTRACK_LABELS=yCONFIG_NF_CT_PROTO_DCCP=yCONFIG_NF_CT_PROTO_GRE=yCONFIG_NF_CT_PROTO_SCTP=yCONFIG_NF_CT_PROTO_UDPLITE=yCONFIG_NF_CONNTRACK_AMANDA=mCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=mCONFIG_NF_CONNTRACK_BROADCAST=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_SNMP=mCONFIG_NF_CONNTRACK_PPTP=mCONFIG_NF_CONNTRACK_SANE=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=mCONFIG_NF_CT_NETLINK=mCONFIG_NF_CT_NETLINK_TIMEOUT=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not setCONFIG_NF_NAT=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_SIP=mCONFIG_NF_NAT_TFTP=mCONFIG_NF_NAT_REDIRECT=yCONFIG_NF_NAT_MASQUERADE=yCONFIG_NETFILTER_SYNPROXY=mCONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_SET is not set
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not setCONFIG_NFT_CT=mCONFIG_NFT_COUNTER=m
# CONFIG_NFT_CONNLIMIT is not setCONFIG_NFT_LOG=mCONFIG_NFT_LIMIT=mCONFIG_NFT_MASQ=mCONFIG_NFT_REDIR=m
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not setCONFIG_NFT_QUEUE=m
# CONFIG_NFT_QUOTA is not setCONFIG_NFT_REJECT=mCONFIG_NFT_COMPAT=mCONFIG_NFT_HASH=m
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not setCONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#CONFIG_NETFILTER_XT_MARK=mCONFIG_NETFILTER_XT_CONNMARK=mCONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#CONFIG_NETFILTER_XT_TARGET_AUDIT=mCONFIG_NETFILTER_XT_TARGET_CHECKSUM=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=mCONFIG_NETFILTER_XT_TARGET_CT=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_HL=mCONFIG_NETFILTER_XT_TARGET_HMARK=mCONFIG_NETFILTER_XT_TARGET_IDLETIMER=mCONFIG_NETFILTER_XT_TARGET_LED=mCONFIG_NETFILTER_XT_TARGET_LOG=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_NAT=mCONFIG_NETFILTER_XT_TARGET_NETMAP=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_NOTRACK=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_REDIRECT=mCONFIG_NETFILTER_XT_TARGET_MASQUERADE=mCONFIG_NETFILTER_XT_TARGET_TEE=mCONFIG_NETFILTER_XT_TARGET_TPROXY=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=mCONFIG_NETFILTER_XT_MATCH_BPF=mCONFIG_NETFILTER_XT_MATCH_CGROUP=mCONFIG_NETFILTER_XT_MATCH_CLUSTER=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLABEL=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_CPU=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DEVGROUP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ECN=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not setCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_IPVS=mCONFIG_NETFILTER_XT_MATCH_L2TP=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_NFACCT=mCONFIG_NETFILTER_XT_MATCH_OSF=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_RECENT=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_SOCKET=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=mCONFIG_NETFILTER_XT_MATCH_TIME=mCONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration
CONFIG_IP_SET=mCONFIG_IP_SET_MAX=256CONFIG_IP_SET_BITMAP_IP=mCONFIG_IP_SET_BITMAP_IPMAC=mCONFIG_IP_SET_BITMAP_PORT=mCONFIG_IP_SET_HASH_IP=mCONFIG_IP_SET_HASH_IPMARK=mCONFIG_IP_SET_HASH_IPPORT=mCONFIG_IP_SET_HASH_IPPORTIP=mCONFIG_IP_SET_HASH_IPPORTNET=mCONFIG_IP_SET_HASH_IPMAC=mCONFIG_IP_SET_HASH_MAC=mCONFIG_IP_SET_HASH_NETPORTNET=mCONFIG_IP_SET_HASH_NET=mCONFIG_IP_SET_HASH_NETNET=mCONFIG_IP_SET_HASH_NETPORT=mCONFIG_IP_SET_HASH_NETIFACE=mCONFIG_IP_SET_LIST_SET=mCONFIG_IP_VS=mCONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=yCONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not setCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not setCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IP_VS_NFCT=yCONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_SOCKET_IPV4=mCONFIG_NF_TPROXY_IPV4=m
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not setCONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not setCONFIG_NF_LOG_IPV4=mCONFIG_NF_REJECT_IPV4=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_RPFILTER=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_SYNPROXY=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_SECURITY=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#CONFIG_NF_SOCKET_IPV6=mCONFIG_NF_TPROXY_IPV6=m
# CONFIG_NF_TABLES_IPV6 is not setCONFIG_NF_DUP_IPV6=mCONFIG_NF_REJECT_IPV6=mCONFIG_NF_LOG_IPV6=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_RPFILTER=mCONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not setCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_TARGET_SYNPROXY=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=mCONFIG_IP6_NF_SECURITY=mCONFIG_IP6_NF_NAT=mCONFIG_IP6_NF_TARGET_MASQUERADE=mCONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
# CONFIG_NF_TABLES_BRIDGE is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not setCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_IP6=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not setCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not setCONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
# CONFIG_TIPC is not setCONFIG_ATM=mCONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=mCONFIG_L2TP_DEBUGFS=mCONFIG_L2TP_V3=yCONFIG_L2TP_IP=mCONFIG_L2TP_ETH=mCONFIG_STP=mCONFIG_GARP=mCONFIG_MRP=mCONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not setCONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set CONFIG_6LOWPAN_NHC=m CONFIG_6LOWPAN_NHC_DEST=m CONFIG_6LOWPAN_NHC_FRAGMENT=m CONFIG_6LOWPAN_NHC_HOP=m CONFIG_6LOWPAN_NHC_IPV6=m CONFIG_6LOWPAN_NHC_MOBILITY=m CONFIG_6LOWPAN_NHC_ROUTING=m CONFIG_6LOWPAN_NHC_UDP=m
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set # CONFIG_6LOWPAN_GHC_UDP is not set
# CONFIG_6LOWPAN_GHC_ICMPV6 is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set # CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set # CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set CONFIG_IEEE802154_SOCKET=m CONFIG_IEEE802154_6LOWPAN=m CONFIG_MAC802154=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFB=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not setCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not setCONFIG_NET_SCH_CHOKE=mCONFIG_NET_SCH_QFQ=mCONFIG_NET_SCH_CODEL=mCONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not setCONFIG_NET_SCH_FQ=m
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not setCONFIG_NET_SCH_INGRESS=mCONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_FLOW=mCONFIG_NET_CLS_CGROUP=yCONFIG_NET_CLS_BPF=mCONFIG_NET_CLS_FLOWER=mCONFIG_NET_CLS_MATCHALL=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not setCONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not setCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_SAMPLE=mCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_NAT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=mCONFIG_NET_ACT_SKBEDIT=mCONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not setCONFIG_NET_ACT_VLAN=m
# CONFIG_NET_ACT_BPF is not setCONFIG_NET_ACT_CONNMARK=m
# CONFIG_NET_ACT_CTINFO is not setCONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not setCONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_CT is not set
# CONFIG_NET_TC_SKB_EXT is not setCONFIG_NET_SCH_FIFO=yCONFIG_DCB=yCONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not setCONFIG_OPENVSWITCH=mCONFIG_OPENVSWITCH_GRE=mCONFIG_OPENVSWITCH_VXLAN=mCONFIG_OPENVSWITCH_GENEVE=mCONFIG_VSOCKETS=mCONFIG_VSOCKETS_DIAG=mCONFIG_VMWARE_VMCI_VSOCKETS=mCONFIG_VIRTIO_VSOCKETS=mCONFIG_VIRTIO_VSOCKETS_COMMON=mCONFIG_HYPERV_VSOCKETS=mCONFIG_NETLINK_DIAG=mCONFIG_MPLS=yCONFIG_NET_MPLS_GSO=yCONFIG_MPLS_ROUTING=mCONFIG_MPLS_IPTUNNEL=mCONFIG_NET_NSH=m
# CONFIG_HSR is not setCONFIG_NET_SWITCHDEV=yCONFIG_NET_L3_MASTER_DEV=y
# CONFIG_NET_NCSI is not setCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not setCONFIG_CGROUP_NET_CLASSID=yCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=yCONFIG_BPF_JIT=yCONFIG_BPF_STREAM_PARSER=yCONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NET_DROP_MONITOR=y
# end of Network testing # end of Networking options
# CONFIG_HAMRADIO is not setCONFIG_CAN=mCONFIG_CAN_RAW=mCONFIG_CAN_BCM=mCONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not setCONFIG_CAN_SLCAN=mCONFIG_CAN_DEV=mCONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not setCONFIG_CAN_C_CAN=mCONFIG_CAN_C_CAN_PLATFORM=mCONFIG_CAN_C_CAN_PCI=mCONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not setCONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not setCONFIG_CAN_SJA1000=mCONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not setCONFIG_CAN_KVASER_PCI=mCONFIG_CAN_PEAK_PCI=mCONFIG_CAN_PEAK_PCIEC=yCONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not setCONFIG_CAN_SJA1000_PLATFORM=mCONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#CONFIG_CAN_8DEV_USB=mCONFIG_CAN_EMS_USB=mCONFIG_CAN_ESD_USB2=m
# CONFIG_CAN_GS_USB is not setCONFIG_CAN_KVASER_USB=m
# CONFIG_CAN_MCBA_USB is not setCONFIG_CAN_PEAK_USB=m
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers
CONFIG_BT=mCONFIG_BT_BREDR=yCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=mCONFIG_BT_HIDP=mCONFIG_BT_HS=yCONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not setCONFIG_BT_DEBUGFS=y
#
# Bluetooth device drivers
#CONFIG_BT_INTEL=mCONFIG_BT_BCM=mCONFIG_BT_RTL=mCONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not setCONFIG_BT_HCIBTUSB_BCM=y
# CONFIG_BT_HCIBTUSB_MTK is not setCONFIG_BT_HCIBTUSB_RTL=yCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not setCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIVHCI=mCONFIG_BT_MRVL=mCONFIG_BT_MRVL_SDIO=mCONFIG_BT_ATH3K=m
# CONFIG_BT_MTKSDIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not setCONFIG_STREAM_PARSER=yCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_PRIV=yCONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not setCONFIG_CFG80211_REQUIRE_SIGNED_REGDB=yCONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=yCONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not setCONFIG_CFG80211_CRDA_SUPPORT=yCONFIG_CFG80211_WEXT=yCONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=mCONFIG_MAC80211_HAS_RC=yCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel_ht"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=yCONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not setCONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not setCONFIG_NET_9P=yCONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not setCONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not setCONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not setCONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not setCONFIG_LWTUNNEL=yCONFIG_LWTUNNEL_BPF=yCONFIG_DST_CACHE=yCONFIG_GRO_CELLS=yCONFIG_NET_SOCK_MSG=yCONFIG_NET_DEVLINK=yCONFIG_PAGE_POOL=yCONFIG_FAILOVER=mCONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#CONFIG_HAVE_EISA=y
# CONFIG_EISA is not setCONFIG_HAVE_PCI=yCONFIG_PCI=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=yCONFIG_PCIEAER_INJECT=mCONFIG_PCIE_ECRC=yCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not setCONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_BW is not setCONFIG_PCI_MSI=yCONFIG_PCI_MSI_IRQ_DOMAIN=yCONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not setCONFIG_PCI_STUB=y
# CONFIG_PCI_PF_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not setCONFIG_PCI_ATS=yCONFIG_PCI_LOCKLESS_CONFIG=yCONFIG_PCI_IOV=yCONFIG_PCI_PRI=yCONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not setCONFIG_PCI_LABEL=yCONFIG_PCI_HYPERV=mCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_ACPI=yCONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not setCONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
CONFIG_VMD=yCONFIG_PCI_HYPERV_INTERFACE=m
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support # end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not setCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=mCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER=yCONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#CONFIG_FW_LOADER=y CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set # CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=yCONFIG_ALLOW_DEV_COREDUMP=yCONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not setCONFIG_SYS_HYPERVISOR=yCONFIG_GENERIC_CPU_AUTOPROBE=yCONFIG_GENERIC_CPU_VULNERABILITIES=yCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_SPI=yCONFIG_REGMAP_IRQ=yCONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# end of Bus devices
CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not setCONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#CONFIG_MTD_BLKDEVS=mCONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=yCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set
# CONFIG_MTD_SPI_NAND is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
# CONFIG_MTD_SPI_NOR is not setCONFIG_MTD_UBI=mCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not setCONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=yCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_NULL_BLK=mCONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=yCONFIG_BLK_DEV_FD=mCONFIG_CDROM=m
# CONFIG_PARIDE is not setCONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_UMEM is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not setCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SKD is not setCONFIG_BLK_DEV_SX8=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384CONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not setCONFIG_ATA_OVER_ETH=mCONFIG_XEN_BLKDEV_FRONTEND=mCONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not setCONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#CONFIG_NVME_CORE=mCONFIG_BLK_DEV_NVME=mCONFIG_NVME_MULTIPATH=yCONFIG_NVME_FABRICS=mCONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not setCONFIG_NVME_TARGET=mCONFIG_NVME_TARGET_LOOP=mCONFIG_NVME_TARGET_FC=mCONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not setCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not setCONFIG_ENCLOSURE_SERVICES=mCONFIG_SGI_XP=mCONFIG_HP_ILO=mCONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not setCONFIG_APDS9802ALS=mCONFIG_ISL29003=mCONFIG_ISL29020=mCONFIG_SENSORS_TSL2550=mCONFIG_SENSORS_BH1770=mCONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not setCONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not setCONFIG_PVPANIC=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not setCONFIG_EEPROM_LEGACY=mCONFIG_EEPROM_MAX6875=mCONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=mCONFIG_ALTERA_STAPL=mCONFIG_INTEL_MEI=mCONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not setCONFIG_VMWARE_VMCI=m
#
# Intel MIC & related support
#
#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set
#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set
#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers #
#
# VOP Driver
#
# end of Intel MIC & related support
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_ENCLOSURE=mCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=mCONFIG_ISCSI_BOOT_SYSFS=mCONFIG_SCSI_CXGB3_ISCSI=mCONFIG_SCSI_CXGB4_ISCSI=mCONFIG_SCSI_BNX2_ISCSI=mCONFIG_SCSI_BNX2X_FCOE=mCONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not setCONFIG_SCSI_HPSA=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not setCONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not setCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=4CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not setCONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not setCONFIG_SCSI_MVSAS_TASKLET=yCONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not setCONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not setCONFIG_MEGARAID_SAS=mCONFIG_SCSI_MPT3SAS=mCONFIG_SCSI_MPT2SAS_MAX_SGE=128CONFIG_SCSI_MPT3SAS_MAX_SGE=128CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_SMARTPQI is not setCONFIG_SCSI_UFSHCD=mCONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
# CONFIG_SCSI_UFS_BSG is not setCONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not setCONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not setCONFIG_HYPERV_STORAGE=mCONFIG_LIBFC=mCONFIG_LIBFCOE=mCONFIG_FCOE=mCONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not setCONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not setCONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not setCONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not setCONFIG_SCSI_QLA_FC=mCONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not setCONFIG_SCSI_QLA_ISCSI=m
# CONFIG_QEDI is not set
# CONFIG_QEDF is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not setCONFIG_SCSI_DEBUG=mCONFIG_SCSI_PMCRAID=mCONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not setCONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not setCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=yCONFIG_SCSI_DH_EMC=yCONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=mCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not setCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=mCONFIG_SATA_MOBILE_LPM_POLICY=0CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not setCONFIG_SATA_ACARD_AHCI=mCONFIG_SATA_SIL24=mCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#CONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=mCONFIG_SATA_SX4=mCONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not setCONFIG_SATA_MV=mCONFIG_SATA_NV=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SIL=mCONFIG_SATA_SIS=mCONFIG_SATA_SVW=mCONFIG_SATA_ULI=mCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#CONFIG_PATA_ALI=mCONFIG_PATA_AMD=mCONFIG_PATA_ARTOP=mCONFIG_PATA_ATIIXP=mCONFIG_PATA_ATP867X=mCONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not setCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=mCONFIG_PATA_HPT3X2N=mCONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not setCONFIG_PATA_IT8213=mCONFIG_PATA_IT821X=mCONFIG_PATA_JMICRON=mCONFIG_PATA_MARVELL=mCONFIG_PATA_NETCELL=mCONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not setCONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not setCONFIG_PATA_PDC2027X=mCONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not setCONFIG_PATA_RDC=mCONFIG_PATA_SCH=mCONFIG_PATA_SERVERWORKS=mCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=mCONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not setCONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#CONFIG_PATA_ACPI=mCONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set CONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=mCONFIG_DM_DEBUG=yCONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set CONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=mCONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=mCONFIG_DM_RAID=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=mCONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set CONFIG_DM_UEVENT=yCONFIG_DM_FLAKEY=mCONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=mCONFIG_DM_LOG_WRITES=m
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_ZONED is not set CONFIG_TARGET_CORE=mCONFIG_TCM_IBLOCK=mCONFIG_TCM_FILEIO=mCONFIG_TCM_PSCSI=mCONFIG_TCM_USER2=m CONFIG_LOOPBACK_TARGET=mCONFIG_TCM_FC=mCONFIG_ISCSI_TARGET=m CONFIG_ISCSI_TARGET_CXGB4=m
# CONFIG_SBP_TARGET is not set CONFIG_FUSION=yCONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=mCONFIG_FIREWIRE_OHCI=mCONFIG_FIREWIRE_SBP2=mCONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_MII=yCONFIG_NET_CORE=yCONFIG_BONDING=mCONFIG_DUMMY=m
# CONFIG_EQUALIZER is not setCONFIG_NET_FC=yCONFIG_IFB=mCONFIG_NET_TEAM=mCONFIG_NET_TEAM_MODE_BROADCAST=mCONFIG_NET_TEAM_MODE_ROUNDROBIN=mCONFIG_NET_TEAM_MODE_RANDOM=mCONFIG_NET_TEAM_MODE_ACTIVEBACKUP=mCONFIG_NET_TEAM_MODE_LOADBALANCE=mCONFIG_MACVLAN=mCONFIG_MACVTAP=m
# CONFIG_IPVLAN is not setCONFIG_VXLAN=mCONFIG_GENEVE=m
# CONFIG_GTP is not setCONFIG_MACSEC=yCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_NTB_NETDEV=mCONFIG_TUN=mCONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not setCONFIG_VETH=mCONFIG_VIRTIO_NET=mCONFIG_NLMON=mCONFIG_NET_VRF=yCONFIG_VSOCKMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=yCONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not setCONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not setCONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not setCONFIG_NET_VENDOR_AMAZON=yCONFIG_ENA_ETHERNET=mCONFIG_NET_VENDOR_AMD=yCONFIG_AMD8111_ETH=mCONFIG_PCNET32=mCONFIG_AMD_XGBE=m
# CONFIG_AMD_XGBE_DCB is not setCONFIG_AMD_XGBE_HAVE_ECC=yCONFIG_NET_VENDOR_AQUANTIA=yCONFIG_AQTION=mCONFIG_NET_VENDOR_ARC=yCONFIG_NET_VENDOR_ATHEROS=yCONFIG_ATL2=mCONFIG_ATL1=mCONFIG_ATL1E=mCONFIG_ATL1C=mCONFIG_ALX=mCONFIG_NET_VENDOR_AURORA=y
# CONFIG_AURORA_NB8800 is not setCONFIG_NET_VENDOR_BROADCOM=yCONFIG_B44=mCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=y
# CONFIG_BCMGENET is not setCONFIG_BNX2=mCONFIG_CNIC=mCONFIG_TIGON3=yCONFIG_TIGON3_HWMON=yCONFIG_BNX2X=mCONFIG_BNX2X_SRIOV=y
# CONFIG_SYSTEMPORT is not setCONFIG_BNXT=mCONFIG_BNXT_SRIOV=yCONFIG_BNXT_FLOWER_OFFLOAD=yCONFIG_BNXT_DCB=yCONFIG_BNXT_HWMON=yCONFIG_NET_VENDOR_BROCADE=yCONFIG_BNA=mCONFIG_NET_VENDOR_CADENCE=yCONFIG_MACB=mCONFIG_MACB_USE_HWSTAMP=y
# CONFIG_MACB_PCI is not setCONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not setCONFIG_CAVIUM_PTP=yCONFIG_LIQUIDIO=mCONFIG_LIQUIDIO_VF=mCONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not setCONFIG_CHELSIO_T3=mCONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not setCONFIG_CHELSIO_T4VF=mCONFIG_CHELSIO_LIB=mCONFIG_NET_VENDOR_CISCO=yCONFIG_ENIC=mCONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not setCONFIG_DNET=mCONFIG_NET_VENDOR_DEC=yCONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_DE2104X_DSL=0CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not setCONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not setCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not setCONFIG_NET_VENDOR_EMULEX=yCONFIG_BE2NET=mCONFIG_BE2NET_HWMON=yCONFIG_BE2NET_BE2=yCONFIG_BE2NET_BE3=yCONFIG_BE2NET_LANCER=yCONFIG_BE2NET_SKYHAWK=yCONFIG_NET_VENDOR_EZCHIP=yCONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
# CONFIG_NET_VENDOR_HP is not setCONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
# CONFIG_NET_VENDOR_I825XX is not setCONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not setCONFIG_E1000=yCONFIG_E1000E=yCONFIG_E1000E_HWTS=yCONFIG_IGB=yCONFIG_IGB_HWMON=yCONFIG_IGBVF=m
# CONFIG_IXGB is not setCONFIG_IXGBE=yCONFIG_IXGBE_HWMON=yCONFIG_IXGBE_DCB=yCONFIG_IXGBEVF=mCONFIG_I40E=yCONFIG_I40E_DCB=yCONFIG_IAVF=mCONFIG_I40EVF=m
# CONFIG_ICE is not setCONFIG_FM10K=m
# CONFIG_IGC is not setCONFIG_JME=mCONFIG_NET_VENDOR_MARVELL=yCONFIG_MVMDIO=mCONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not setCONFIG_SKGE_GENESIS=yCONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not setCONFIG_NET_VENDOR_MELLANOX=yCONFIG_MLX4_EN=mCONFIG_MLX4_EN_DCB=yCONFIG_MLX4_CORE=mCONFIG_MLX4_DEBUG=yCONFIG_MLX4_CORE_GEN2=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not setCONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_MSCC_OCELOT_SWITCH is not setCONFIG_NET_VENDOR_MYRI=yCONFIG_MYRI10GE=mCONFIG_MYRI10GE_DCA=y
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not setCONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not setCONFIG_NET_VENDOR_NETRONOME=yCONFIG_NFP=mCONFIG_NFP_APP_FLOWER=yCONFIG_NFP_APP_ABM_NIC=y
# CONFIG_NFP_DEBUG is not setCONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_NVIDIA is not setCONFIG_NET_VENDOR_OKI=yCONFIG_ETHOC=mCONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not setCONFIG_YELLOWFIN=mCONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not setCONFIG_NET_VENDOR_QLOGIC=yCONFIG_QLA3XXX=mCONFIG_QLCNIC=mCONFIG_QLCNIC_SRIOV=yCONFIG_QLCNIC_DCB=yCONFIG_QLCNIC_HWMON=yCONFIG_NETXEN_NIC=mCONFIG_QED=mCONFIG_QED_SRIOV=yCONFIG_QEDE=mCONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
# CONFIG_NET_VENDOR_RDC is not setCONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not setCONFIG_8139CP=yCONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_R8169=yCONFIG_NET_VENDOR_RENESAS=yCONFIG_NET_VENDOR_ROCKER=yCONFIG_ROCKER=mCONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not setCONFIG_NET_VENDOR_SOLARFLARE=yCONFIG_SFC=mCONFIG_SFC_MTD=yCONFIG_SFC_MCDI_MON=yCONFIG_SFC_SRIOV=yCONFIG_SFC_MCDI_LOGGING=yCONFIG_SFC_FALCON=mCONFIG_SFC_FALCON_MTD=y
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not setCONFIG_NET_VENDOR_SMSC=yCONFIG_EPIC100=m
# CONFIG_SMSC911X is not setCONFIG_SMSC9420=mCONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not setCONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_NET_VENDOR_TEHUTI is not setCONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not setCONFIG_TLAN=m
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not setCONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not setCONFIG_MDIO_DEVICE=yCONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not setCONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_THUNDER is not setCONFIG_PHYLIB=yCONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
#
# MII PHY device drivers
#
# CONFIG_ADIN_PHY is not setCONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not setCONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not setCONFIG_BCM87XX_PHY=mCONFIG_BCM_NET_PHYLIB=mCONFIG_BROADCOM_PHY=mCONFIG_CICADA_PHY=m
# CONFIG_CORTINA_PHY is not setCONFIG_DAVICOM_PHY=m
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not setCONFIG_FIXED_PHY=yCONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not setCONFIG_LSI_ET1011C_PHY=mCONFIG_LXT_PHY=mCONFIG_MARVELL_PHY=m
# CONFIG_MARVELL_10G_PHY is not setCONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not setCONFIG_NATIONAL_PHY=m
# CONFIG_NXP_TJA11XX_PHY is not setCONFIG_QSEMI_PHY=mCONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not setCONFIG_SMSC_PHY=mCONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not setCONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not setCONFIG_PPP=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_FILTER=yCONFIG_PPP_MPPE=mCONFIG_PPP_MULTILINK=yCONFIG_PPPOATM=mCONFIG_PPPOE=mCONFIG_PPTP=mCONFIG_PPPOL2TP=mCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_SLIP=mCONFIG_SLHC=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not setCONFIG_USB_NET_DRIVERS=yCONFIG_USB_CATC=yCONFIG_USB_KAWETH=yCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=yCONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not setCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_AX88179_178A=mCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_EEM=yCONFIG_USB_NET_CDC_NCM=mCONFIG_USB_NET_HUAWEI_CDC_NCM=mCONFIG_USB_NET_CDC_MBIM=mCONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not setCONFIG_USB_NET_SMSC75XX=yCONFIG_USB_NET_SMSC95XX=yCONFIG_USB_NET_GL620A=yCONFIG_USB_NET_NET1080=yCONFIG_USB_NET_PLUSB=yCONFIG_USB_NET_MCS7830=yCONFIG_USB_NET_RNDIS_HOST=yCONFIG_USB_NET_CDC_SUBSET_ENABLE=yCONFIG_USB_NET_CDC_SUBSET=yCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=yCONFIG_USB_NET_CX82310_ETH=mCONFIG_USB_NET_KALMIA=mCONFIG_USB_NET_QMI_WWAN=mCONFIG_USB_HSO=mCONFIG_USB_NET_INT51X1=yCONFIG_USB_IPHETH=yCONFIG_USB_SIERRA_NET=yCONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not setCONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not setCONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not setCONFIG_ATH_COMMON=mCONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not setCONFIG_ATH9K_HW=mCONFIG_ATH9K_COMMON=mCONFIG_ATH9K_BTCOEX_SUPPORT=y
# CONFIG_ATH9K is not setCONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not setCONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not setCONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not setCONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not setCONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not setCONFIG_IWLEGACY=mCONFIG_IWL4965=mCONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options # CONFIG_IWLEGACY_DEBUG=y CONFIG_IWLEGACY_DEBUGFS=y # end of iwl3945 / iwl4965 Debugging Options
CONFIG_IWLWIFI=mCONFIG_IWLWIFI_LEDS=yCONFIG_IWLDVM=mCONFIG_IWLMVM=mCONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not setCONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# end of Debugging Options
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not setCONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not setCONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not setCONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not setCONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_RTL_CARDS is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not setCONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not setCONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not setCONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not setCONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not setCONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not setCONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #CONFIG_WAN=y
# CONFIG_LANMEDIA is not setCONFIG_HDLC=mCONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set CONFIG_HDLC_CISCO=mCONFIG_HDLC_FR=mCONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not setCONFIG_DLCI=mCONFIG_DLCI_MAX=8
# CONFIG_SBNI is not setCONFIG_IEEE802154_DRIVERS=mCONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not setCONFIG_XEN_NETDEV_FRONTEND=mCONFIG_VMXNET3=mCONFIG_FUJITSU_ES=mCONFIG_THUNDERBOLT_NET=mCONFIG_HYPERV_NET=mCONFIG_NETDEVSIM=mCONFIG_NET_FAILOVER=mCONFIG_ISDN=yCONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not setCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_MISDN=mCONFIG_MISDN_DSP=mCONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#CONFIG_MISDN_HFCPCI=mCONFIG_MISDN_HFCMULTI=mCONFIG_MISDN_HFCUSB=mCONFIG_MISDN_AVMFRITZ=mCONFIG_MISDN_SPEEDFAX=mCONFIG_MISDN_INFINEON=mCONFIG_MISDN_W6692=mCONFIG_MISDN_NETJET=mCONFIG_MISDN_HDLC=mCONFIG_MISDN_IPAC=mCONFIG_MISDN_ISAR=mCONFIG_NVM=y
# CONFIG_NVM_PBLK is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_LEDS=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=mCONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not setCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_BYD=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=yCONFIG_MOUSE_PS2_CYPRESS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_ELANTECH_SMBUS=yCONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not setCONFIG_MOUSE_PS2_FOCALTECH=yCONFIG_MOUSE_PS2_VMMOUSE=yCONFIG_MOUSE_PS2_SMBUS=yCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_APPLETOUCH=mCONFIG_MOUSE_BCM5974=mCONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not setCONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not setCONFIG_MOUSE_SYNAPTICS_I2C=mCONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=mCONFIG_TABLET_USB_AIPTEK=mCONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not setCONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not setCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ADC is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not setCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_WACOM_W8001=mCONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not setCONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MSM_VIBRATOR is not setCONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not setCONFIG_INPUT_APANEL=mCONFIG_INPUT_GP2A=m
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not setCONFIG_INPUT_ATLAS_BTNS=mCONFIG_INPUT_ATI_REMOTE2=mCONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not setCONFIG_INPUT_POWERMATE=mCONFIG_INPUT_YEALINK=mCONFIG_INPUT_CM109=mCONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not setCONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not setCONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not setCONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not setCONFIG_RMI4_SMB=mCONFIG_RMI4_F03=yCONFIG_RMI4_F03_SERIO=mCONFIG_RMI4_2D_SENSOR=yCONFIG_RMI4_F11=yCONFIG_RMI4_F12=yCONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F54 is not set
# CONFIG_RMI4_F55 is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_ARCH_MIGHT_HAVE_PC_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not setCONFIG_SERIO_ARC_PS2=mCONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports # end of Input device support
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not setCONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not setCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=mCONFIG_NOZOMI=m
# CONFIG_ISI is not setCONFIG_N_HDLC=mCONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_NULL_TTY is not setCONFIG_LDISC_AUTOLOAD=yCONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_EXAR=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set CONFIG_SERIAL_8250_LPSS=y CONFIG_SERIAL_8250_MID=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not setCONFIG_SERIAL_ARC=mCONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not setCONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_HVC_XEN_FRONTEND=yCONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=mCONFIG_IPMI_DMI_DECODE=yCONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_SSIF=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=mCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_VIA=mCONFIG_HW_RANDOM_VIRTIO=yCONFIG_NVRAM=y
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not setCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=8192CONFIG_HPET=yCONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not setCONFIG_HANGCHECK_TIMER=mCONFIG_UV_MMTIMER=mCONFIG_TCG_TPM=yCONFIG_HW_RANDOM_TPM=yCONFIG_TCG_TIS_CORE=yCONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not setCONFIG_TCG_TIS_I2C_ATMEL=mCONFIG_TCG_TIS_I2C_INFINEON=mCONFIG_TCG_TIS_I2C_NUVOTON=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not setCONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not setCONFIG_TCG_TIS_ST33ZP24=mCONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not setCONFIG_TELCLOCK=mCONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# end of Character devices
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_ACPI_I2C_OPREGION=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_SMBUS=mCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not setCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=m
# CONFIG_I2C_AMD_MP2 is not setCONFIG_I2C_I801=mCONFIG_I2C_ISCH=mCONFIG_I2C_ISMT=mCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not setCONFIG_I2C_SIS96X=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=m CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=mCONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_DIOLAN_U2C=mCONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not setCONFIG_I2C_TINY_USB=mCONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not setCONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not setCONFIG_PPS_CLIENT_LDISC=mCONFIG_PPS_CLIENT_PARPORT=mCONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=yCONFIG_DP83640_PHY=mCONFIG_PTP_1588_CLOCK_KVM=m
# end of PTP clock support
CONFIG_PINCTRL=yCONFIG_PINMUX=yCONFIG_PINCONF=yCONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not setCONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not setCONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not setCONFIG_PINCTRL_INTEL=m
# CONFIG_PINCTRL_BROXTON is not setCONFIG_PINCTRL_CANNONLAKE=m
# CONFIG_PINCTRL_CEDARFORK is not setCONFIG_PINCTRL_DENVERTON=mCONFIG_PINCTRL_GEMINILAKE=m
# CONFIG_PINCTRL_ICELAKE is not setCONFIG_PINCTRL_LEWISBURG=mCONFIG_PINCTRL_SUNRISEPOINT=mCONFIG_GPIOLIB=yCONFIG_GPIOLIB_FASTPATH_LIMIT=512CONFIG_GPIO_ACPI=yCONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not setCONFIG_GPIO_SYSFS=yCONFIG_GPIO_GENERIC=m
#
# Memory mapped GPIO drivers
#CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not setCONFIG_GPIO_ICH=m
# CONFIG_GPIO_LYNXPOINT is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders
CONFIG_GPIO_MOCKUP=y
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not setCONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not setCONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#CONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not setCONFIG_SENSORS_AD7414=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=mCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not setCONFIG_SENSORS_ADT7410=mCONFIG_SENSORS_ADT7411=mCONFIG_SENSORS_ADT7462=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AS370 is not setCONFIG_SENSORS_ASC7621=mCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_K10TEMP=mCONFIG_SENSORS_FAM15H_POWER=mCONFIG_SENSORS_APPLESMC=mCONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not setCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_DS620=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_DELL_SMM=mCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not setCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not setCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_I5500 is not setCONFIG_SENSORS_CORETEMP=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not setCONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not setCONFIG_SENSORS_LTC4151=mCONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not setCONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not setCONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not setCONFIG_SENSORS_MAX16065=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX1668=mCONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6621 is not setCONFIG_SENSORS_MAX6639=mCONFIG_SENSORS_MAX6642=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not setCONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not setCONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not setCONFIG_SENSORS_LM73=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=mCONFIG_SENSORS_LM95234=mCONFIG_SENSORS_LM95241=mCONFIG_SENSORS_LM95245=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not setCONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not setCONFIG_SENSORS_PCF8591=mCONFIG_PMBUS=mCONFIG_SENSORS_PMBUS=mCONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not setCONFIG_SENSORS_LM25066=mCONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not setCONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not setCONFIG_SENSORS_MAX34440=mCONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not setCONFIG_SENSORS_UCD9000=mCONFIG_SENSORS_UCD9200=mCONFIG_SENSORS_ZL6100=mCONFIG_SENSORS_SHT15=mCONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not setCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not setCONFIG_SENSORS_EMC6W201=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_SCH56XX_COMMON=mCONFIG_SENSORS_SCH5627=mCONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not setCONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not setCONFIG_SENSORS_AMC6821=mCONFIG_SENSORS_INA209=mCONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not setCONFIG_SENSORS_THMC50=mCONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not setCONFIG_SENSORS_TMP401=mCONFIG_SENSORS_TMP421=mCONFIG_SENSORS_VIA_CPUTEMP=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not setCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not setCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#CONFIG_SENSORS_ACPI_POWER=m CONFIG_SENSORS_ATK0110=mCONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set # CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#CONFIG_INTEL_POWERCLAMP=mCONFIG_X86_PKG_TEMP_THERMAL=mCONFIG_INTEL_SOC_DTS_IOSF_CORE=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#CONFIG_INT340X_THERMAL=mCONFIG_ACPI_THERMAL_REL=m
# CONFIG_INT3406_THERMAL is not setCONFIG_PROC_THERMAL_MMIO_RAPL=y
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers
# CONFIG_GENERIC_ADC_THERMAL is not setCONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not setCONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=yCONFIG_WATCHDOG_OPEN_TIMEOUT=0CONFIG_WATCHDOG_SYSFS=y
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not setCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not setCONFIG_F71808E_WDT=mCONFIG_SP5100_TCO=mCONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not setCONFIG_IB700_WDT=mCONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not setCONFIG_I6300ESB_WDT=yCONFIG_IE6XX_WDT=mCONFIG_ITCO_WDT=yCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=mCONFIG_IT87_WDT=mCONFIG_HP_WATCHDOG=mCONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not setCONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not setCONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not setCONFIG_VIA_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not setCONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not setCONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_SSB_POSSIBLE=yCONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=yCONFIG_SSB_SDIOHOST_POSSIBLE=yCONFIG_SSB_SDIOHOST=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=yCONFIG_SSB_DRIVER_GPIO=yCONFIG_BCMA_POSSIBLE=yCONFIG_BCMA=mCONFIG_BCMA_HOST_PCI_POSSIBLE=yCONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not setCONFIG_BCMA_DRIVER_PCI=yCONFIG_BCMA_DRIVER_GMAC_CMN=yCONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not setCONFIG_LPC_ICH=mCONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not setCONFIG_MFD_INTEL_LPSS=yCONFIG_MFD_INTEL_LPSS_ACPI=yCONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not setCONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not setCONFIG_MFD_SM501=mCONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not setCONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not setCONFIG_RC_CORE=mCONFIG_RC_MAP=mCONFIG_LIRC=yCONFIG_RC_DECODERS=yCONFIG_IR_NEC_DECODER=mCONFIG_IR_RC5_DECODER=mCONFIG_IR_RC6_DECODER=mCONFIG_IR_JVC_DECODER=mCONFIG_IR_SONY_DECODER=mCONFIG_IR_SANYO_DECODER=mCONFIG_IR_SHARP_DECODER=mCONFIG_IR_MCE_KBD_DECODER=m
# CONFIG_IR_XMP_DECODER is not setCONFIG_IR_IMON_DECODER=m
# CONFIG_IR_RCMM_DECODER is not setCONFIG_RC_DEVICES=yCONFIG_RC_ATI_REMOTE=mCONFIG_IR_ENE=mCONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not setCONFIG_IR_MCEUSB=mCONFIG_IR_ITE_CIR=mCONFIG_IR_FINTEK=mCONFIG_IR_NUVOTON=mCONFIG_IR_REDRAT3=mCONFIG_IR_STREAMZAP=mCONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not setCONFIG_IR_IGUANA=mCONFIG_IR_TTUSBIR=mCONFIG_RC_LOOPBACK=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
# CONFIG_RC_XBOX_DVD is not setCONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#CONFIG_MEDIA_CAMERA_SUPPORT=yCONFIG_MEDIA_ANALOG_TV_SUPPORT=yCONFIG_MEDIA_DIGITAL_TV_SUPPORT=yCONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not setCONFIG_MEDIA_CONTROLLER=yCONFIG_MEDIA_CONTROLLER_DVB=yCONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L2_SUBDEV_API is not setCONFIG_VIDEO_V4L2=mCONFIG_VIDEO_V4L2_I2C=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_VIDEO_TUNER=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEOBUF_VMALLOC=mCONFIG_DVB_CORE=m
# CONFIG_DVB_MMAP is not setCONFIG_DVB_NET=yCONFIG_TTPCI_EEPROM=mCONFIG_DVB_MAX_ADAPTERS=8CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
#
# Media drivers
#CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#CONFIG_USB_VIDEO_CLASS=mCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=yCONFIG_USB_GSPCA=mCONFIG_USB_M5602=mCONFIG_USB_STV06XX=mCONFIG_USB_GL860=mCONFIG_USB_GSPCA_BENQ=mCONFIG_USB_GSPCA_CONEX=mCONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not setCONFIG_USB_GSPCA_ETOMS=mCONFIG_USB_GSPCA_FINEPIX=mCONFIG_USB_GSPCA_JEILINJ=mCONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not setCONFIG_USB_GSPCA_KONICA=mCONFIG_USB_GSPCA_MARS=mCONFIG_USB_GSPCA_MR97310A=mCONFIG_USB_GSPCA_NW80X=mCONFIG_USB_GSPCA_OV519=mCONFIG_USB_GSPCA_OV534=mCONFIG_USB_GSPCA_OV534_9=mCONFIG_USB_GSPCA_PAC207=mCONFIG_USB_GSPCA_PAC7302=mCONFIG_USB_GSPCA_PAC7311=mCONFIG_USB_GSPCA_SE401=mCONFIG_USB_GSPCA_SN9C2028=mCONFIG_USB_GSPCA_SN9C20X=mCONFIG_USB_GSPCA_SONIXB=mCONFIG_USB_GSPCA_SONIXJ=mCONFIG_USB_GSPCA_SPCA500=mCONFIG_USB_GSPCA_SPCA501=mCONFIG_USB_GSPCA_SPCA505=mCONFIG_USB_GSPCA_SPCA506=mCONFIG_USB_GSPCA_SPCA508=mCONFIG_USB_GSPCA_SPCA561=mCONFIG_USB_GSPCA_SPCA1528=mCONFIG_USB_GSPCA_SQ905=mCONFIG_USB_GSPCA_SQ905C=mCONFIG_USB_GSPCA_SQ930X=mCONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not setCONFIG_USB_GSPCA_STV0680=mCONFIG_USB_GSPCA_SUNPLUS=mCONFIG_USB_GSPCA_T613=mCONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not setCONFIG_USB_GSPCA_TV8532=mCONFIG_USB_GSPCA_VC032X=mCONFIG_USB_GSPCA_VICAM=mCONFIG_USB_GSPCA_XIRLINK_CIT=mCONFIG_USB_GSPCA_ZC3XX=mCONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not setCONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not setCONFIG_USB_ZR364XX=mCONFIG_USB_STKWEBCAM=mCONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set
#
# Analog TV USB devices
#CONFIG_VIDEO_PVRUSB2=mCONFIG_VIDEO_PVRUSB2_SYSFS=yCONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not setCONFIG_VIDEO_HDPVR=mCONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set
#
# Analog/digital TV USB devices
#CONFIG_VIDEO_AU0828=mCONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not setCONFIG_VIDEO_CX231XX=mCONFIG_VIDEO_CX231XX_RC=yCONFIG_VIDEO_CX231XX_ALSA=mCONFIG_VIDEO_CX231XX_DVB=mCONFIG_VIDEO_TM6000=mCONFIG_VIDEO_TM6000_ALSA=mCONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not setCONFIG_DVB_USB_DIB3000MC=mCONFIG_DVB_USB_A800=mCONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not setCONFIG_DVB_USB_DIBUSB_MC=mCONFIG_DVB_USB_DIB0700=mCONFIG_DVB_USB_UMT_010=mCONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_CXUSB_ANALOG is not setCONFIG_DVB_USB_M920X=mCONFIG_DVB_USB_DIGITV=mCONFIG_DVB_USB_VP7045=mCONFIG_DVB_USB_VP702X=mCONFIG_DVB_USB_GP8PSK=mCONFIG_DVB_USB_NOVA_T_USB2=mCONFIG_DVB_USB_TTUSB2=mCONFIG_DVB_USB_DTT200U=mCONFIG_DVB_USB_OPERA1=mCONFIG_DVB_USB_AF9005=mCONFIG_DVB_USB_AF9005_REMOTE=mCONFIG_DVB_USB_PCTV452E=mCONFIG_DVB_USB_DW2102=mCONFIG_DVB_USB_CINERGY_T2=mCONFIG_DVB_USB_DTV5100=mCONFIG_DVB_USB_AZ6027=mCONFIG_DVB_USB_TECHNISAT_USB2=mCONFIG_DVB_USB_V2=mCONFIG_DVB_USB_AF9015=mCONFIG_DVB_USB_AF9035=mCONFIG_DVB_USB_ANYSEE=mCONFIG_DVB_USB_AU6610=mCONFIG_DVB_USB_AZ6007=mCONFIG_DVB_USB_CE6230=mCONFIG_DVB_USB_EC168=mCONFIG_DVB_USB_GL861=mCONFIG_DVB_USB_LME2510=mCONFIG_DVB_USB_MXL111SF=mCONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not setCONFIG_DVB_TTUSB_BUDGET=mCONFIG_DVB_TTUSB_DEC=mCONFIG_SMS_USB_DRV=mCONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set
#
# Webcam, TV (analog/digital) USB devices
#CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not setCONFIG_VIDEO_EM28XX_ALSA=mCONFIG_VIDEO_EM28XX_DVB=mCONFIG_VIDEO_EM28XX_RC=mCONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
#
# Media capture/analog TV support
#CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
# CONFIG_VIDEO_IVTV_ALSA is not setCONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set
#
# Media capture/analog/hybrid TV support
#CONFIG_VIDEO_CX18=mCONFIG_VIDEO_CX18_ALSA=mCONFIG_VIDEO_CX23885=mCONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not setCONFIG_VIDEO_CX88=mCONFIG_VIDEO_CX88_ALSA=mCONFIG_VIDEO_CX88_BLACKBIRD=mCONFIG_VIDEO_CX88_DVB=mCONFIG_VIDEO_CX88_ENABLE_VP3054=yCONFIG_VIDEO_CX88_VP3054=mCONFIG_VIDEO_CX88_MPEG=mCONFIG_VIDEO_BT848=mCONFIG_DVB_BT8XX=mCONFIG_VIDEO_SAA7134=mCONFIG_VIDEO_SAA7134_ALSA=mCONFIG_VIDEO_SAA7134_RC=yCONFIG_VIDEO_SAA7134_DVB=mCONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#CONFIG_DVB_AV7110_IR=yCONFIG_DVB_AV7110=mCONFIG_DVB_AV7110_OSD=yCONFIG_DVB_BUDGET_CORE=mCONFIG_DVB_BUDGET=mCONFIG_DVB_BUDGET_CI=mCONFIG_DVB_BUDGET_AV=mCONFIG_DVB_BUDGET_PATCH=mCONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not setCONFIG_DVB_PLUTO2=mCONFIG_DVB_DM1105=mCONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not setCONFIG_MANTIS_CORE=mCONFIG_DVB_MANTIS=mCONFIG_DVB_HOPPER=mCONFIG_DVB_NGENE=mCONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#CONFIG_SMS_SDIO_DRV=mCONFIG_RADIO_ADAPTERS=yCONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# end of Texas Instruments WL128x FM driver (ST based)
#
# Supported FireWire (IEEE 1394) Adapters
#CONFIG_DVB_FIREDTV=mCONFIG_DVB_FIREDTV_INPUT=yCONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options # CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_TVEEPROM=m CONFIG_CYPRESS_FIRMWARE=m CONFIG_VIDEOBUF2_CORE=m CONFIG_VIDEOBUF2_V4L2=m CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_VMALLOC=m CONFIG_VIDEOBUF2_DMA_SG=m CONFIG_VIDEOBUF2_DVB=m CONFIG_DVB_B2C2_FLEXCOP=m CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_SIANO_RC=y # CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) #CONFIG_MEDIA_SUBDRV_AUTOSELECT=yCONFIG_MEDIA_ATTACH=yCONFIG_VIDEO_IR_I2C=m
#
# I2C Encoders, decoders, sensors and other helper chips #
#
# Audio decoders, processors and mixers
#CONFIG_VIDEO_TVAUDIO=mCONFIG_VIDEO_TDA7432=m
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not setCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_CS3308=mCONFIG_VIDEO_CS5345=mCONFIG_VIDEO_CS53L32A=m
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not setCONFIG_VIDEO_WM8775=mCONFIG_VIDEO_WM8739=mCONFIG_VIDEO_VP27SMPX=m
# CONFIG_VIDEO_SONY_BTF_MPX is not set
#
# RDS decoders
#CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not setCONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#CONFIG_VIDEO_SAA717X=mCONFIG_VIDEO_CX25840=m
#
# Video encoders
#CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
#
# Camera sensor devices
#
# CONFIG_VIDEO_OV2640 is not set
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_RJ54N1 is not set
#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
#
# Video improvement chips
#CONFIG_VIDEO_UPD64031A=mCONFIG_VIDEO_UPD64083=m
#
# Audio/Video compression chips
#CONFIG_VIDEO_SAA6752HS=m
#
# SDR tuner chips
#
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not setCONFIG_VIDEO_M52790=m
# CONFIG_VIDEO_I2C is not set
# end of I2C Encoders, decoders, sensors and other helper chips
#
# SPI helper chips
#
# end of SPI helper chips
#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#CONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA18250=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA827X=mCONFIG_MEDIA_TUNER_TDA18271=mCONFIG_MEDIA_TUNER_TDA9887=mCONFIG_MEDIA_TUNER_TEA5761=mCONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_MSI001 is not setCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_MT2060=mCONFIG_MEDIA_TUNER_MT2063=mCONFIG_MEDIA_TUNER_MT2266=mCONFIG_MEDIA_TUNER_MT2131=mCONFIG_MEDIA_TUNER_QT1010=mCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=mCONFIG_MEDIA_TUNER_XC4000=mCONFIG_MEDIA_TUNER_MXL5005S=mCONFIG_MEDIA_TUNER_MXL5007T=mCONFIG_MEDIA_TUNER_MC44S803=mCONFIG_MEDIA_TUNER_MAX2165=mCONFIG_MEDIA_TUNER_TDA18218=mCONFIG_MEDIA_TUNER_FC0011=mCONFIG_MEDIA_TUNER_FC0012=mCONFIG_MEDIA_TUNER_FC0013=mCONFIG_MEDIA_TUNER_TDA18212=mCONFIG_MEDIA_TUNER_E4000=mCONFIG_MEDIA_TUNER_FC2580=mCONFIG_MEDIA_TUNER_M88RS6000T=mCONFIG_MEDIA_TUNER_TUA9001=mCONFIG_MEDIA_TUNER_SI2157=mCONFIG_MEDIA_TUNER_IT913X=mCONFIG_MEDIA_TUNER_R820T=m
# CONFIG_MEDIA_TUNER_MXL301RF is not setCONFIG_MEDIA_TUNER_QM1D1C0042=mCONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#CONFIG_DVB_STB0899=mCONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=mCONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=mCONFIG_DVB_STV6111=mCONFIG_DVB_MXL5XX=mCONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#CONFIG_DVB_DRXK=mCONFIG_DVB_TDA18271C2DD=mCONFIG_DVB_SI2165=mCONFIG_DVB_MN88472=mCONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#CONFIG_DVB_CX24110=mCONFIG_DVB_CX24123=mCONFIG_DVB_MT312=mCONFIG_DVB_ZL10036=mCONFIG_DVB_ZL10039=mCONFIG_DVB_S5H1420=mCONFIG_DVB_STV0288=mCONFIG_DVB_STB6000=mCONFIG_DVB_STV0299=mCONFIG_DVB_STV6110=mCONFIG_DVB_STV0900=mCONFIG_DVB_TDA8083=mCONFIG_DVB_TDA10086=mCONFIG_DVB_TDA8261=mCONFIG_DVB_VES1X93=mCONFIG_DVB_TUNER_ITD1000=mCONFIG_DVB_TUNER_CX24113=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TUA6100=mCONFIG_DVB_CX24116=mCONFIG_DVB_CX24117=mCONFIG_DVB_CX24120=mCONFIG_DVB_SI21XX=mCONFIG_DVB_TS2020=mCONFIG_DVB_DS3000=mCONFIG_DVB_MB86A16=mCONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=mCONFIG_DVB_CX22700=mCONFIG_DVB_CX22702=m
# CONFIG_DVB_S5H1432 is not setCONFIG_DVB_DRXD=mCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=mCONFIG_DVB_ZL10353=mCONFIG_DVB_DIB3000MB=mCONFIG_DVB_DIB3000MC=mCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=m
# CONFIG_DVB_DIB9000 is not setCONFIG_DVB_TDA10048=mCONFIG_DVB_AF9013=mCONFIG_DVB_EC100=mCONFIG_DVB_STV0367=mCONFIG_DVB_CXD2820R=mCONFIG_DVB_CXD2841ER=mCONFIG_DVB_RTL2830=mCONFIG_DVB_RTL2832=mCONFIG_DVB_SI2168=m
# CONFIG_DVB_ZD1301_DEMOD is not setCONFIG_DVB_GP8PSK_FE=m
# CONFIG_DVB_CXD2880 is not set
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=mCONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=mCONFIG_DVB_OR51211=mCONFIG_DVB_OR51132=mCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=mCONFIG_DVB_LGDT3305=mCONFIG_DVB_LGDT3306A=mCONFIG_DVB_LG2160=mCONFIG_DVB_S5H1409=mCONFIG_DVB_AU8522=mCONFIG_DVB_AU8522_DTV=mCONFIG_DVB_AU8522_V4L=mCONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#CONFIG_DVB_S921=mCONFIG_DVB_DIB8000=mCONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends #CONFIG_DVB_TC90522=m
# CONFIG_DVB_MN88443X is not set
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=mCONFIG_DVB_TUNER_DIB0070=mCONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#CONFIG_DVB_DRX39XYJ=mCONFIG_DVB_LNBH25=m
# CONFIG_DVB_LNBH29 is not setCONFIG_DVB_LNBP21=mCONFIG_DVB_LNBP22=mCONFIG_DVB_ISL6405=mCONFIG_DVB_ISL6421=mCONFIG_DVB_ISL6423=mCONFIG_DVB_A8293=m
# CONFIG_DVB_LGS8GL5 is not setCONFIG_DVB_LGS8GXX=mCONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=mCONFIG_DVB_IX2505V=mCONFIG_DVB_M88RS2000=mCONFIG_DVB_AF9033=m
# CONFIG_DVB_HORUS3A is not set
# CONFIG_DVB_ASCOT2E is not set
# CONFIG_DVB_HELENE is not set
#
# Common Interface (EN50221) controller drivers
#CONFIG_DVB_CXD2099=m
# CONFIG_DVB_SP2 is not set
#
# Tools to develop new frontends
#CONFIG_DVB_DUMMY_FE=m
# end of Customise DVB Frontends
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=yCONFIG_AGP_VIA=yCONFIG_INTEL_GTT=yCONFIG_VGA_ARB=yCONFIG_VGA_ARB_MAX_GPUS=64CONFIG_VGA_SWITCHEROO=yCONFIG_DRM=mCONFIG_DRM_MIPI_DSI=yCONFIG_DRM_DP_AUX_CHARDEV=yCONFIG_DRM_DEBUG_SELFTEST=mCONFIG_DRM_KMS_HELPER=mCONFIG_DRM_KMS_FB_HELPER=yCONFIG_DRM_FBDEV_EMULATION=yCONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not setCONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not setCONFIG_DRM_TTM=mCONFIG_DRM_VRAM_HELPER=mCONFIG_DRM_GEM_SHMEM_HELPER=y
#
# I2C encoder or helper chips
#CONFIG_DRM_I2C_CH7006=mCONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
#
# ACP (Audio CoProcessor) Configuration
#
# end of ACP (Audio CoProcessor) Configuration
# CONFIG_DRM_NOUVEAU is not setCONFIG_DRM_I915=m
# CONFIG_DRM_I915_ALPHA_SUPPORT is not setCONFIG_DRM_I915_FORCE_PROBE=""CONFIG_DRM_I915_CAPTURE_ERROR=yCONFIG_DRM_I915_COMPRESS_ERROR=yCONFIG_DRM_I915_USERPTR=yCONFIG_DRM_I915_GVT=yCONFIG_DRM_I915_GVT_KVMGT=m
#
# drm/i915 Debugging # # CONFIG_DRM_I915_WERROR is not set # CONFIG_DRM_I915_DEBUG is not set # CONFIG_DRM_I915_DEBUG_MMIO is not set # CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set # CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set # CONFIG_DRM_I915_DEBUG_GUC is not set # CONFIG_DRM_I915_SELFTEST is not set # CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set # CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set # CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set # end of drm/i915 Debugging
#
# drm/i915 Profile Guided Optimisation # CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250 CONFIG_DRM_I915_SPIN_REQUEST=5 # end of drm/i915 Profile Guided Optimisation
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not setCONFIG_DRM_VMWGFX=mCONFIG_DRM_VMWGFX_FBCON=yCONFIG_DRM_GMA500=mCONFIG_DRM_GMA600=yCONFIG_DRM_GMA3600=yCONFIG_DRM_UDL=mCONFIG_DRM_AST=mCONFIG_DRM_MGAG200=mCONFIG_DRM_CIRRUS_QEMU=mCONFIG_DRM_QXL=mCONFIG_DRM_BOCHS=mCONFIG_DRM_VIRTIO_GPU=mCONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=yCONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_XEN is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_LEGACY is not setCONFIG_DRM_PANEL_ORIENTATION_QUIRKS=yCONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#CONFIG_FB_CMDLINE=yCONFIG_FB_NOTIFY=yCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not setCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=yCONFIG_FB_SYS_FILLRECT=mCONFIG_FB_SYS_COPYAREA=mCONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=mCONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not setCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not setCONFIG_FB_VESA=yCONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not setCONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not setCONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not setCONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not setCONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set CONFIG_DUMMY_CONSOLE=yCONFIG_DUMMY_CONSOLE_COLUMNS=80CONFIG_DUMMY_CONSOLE_ROWS=25CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not setCONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
CONFIG_SOUND=mCONFIG_SOUND_OSS_CORE=yCONFIG_SOUND_OSS_CORE_PRECLAIM=yCONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_PCM_ELD=yCONFIG_SND_HWDEP=mCONFIG_SND_SEQ_DEVICE=mCONFIG_SND_RAWMIDI=mCONFIG_SND_COMPRESS_OFFLOAD=mCONFIG_SND_JACK=yCONFIG_SND_JACK_INPUT_DEV=yCONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not setCONFIG_SND_PCM_TIMER=yCONFIG_SND_HRTIMER=mCONFIG_SND_DYNAMIC_MINORS=yCONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not setCONFIG_SND_PROC_FS=yCONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not setCONFIG_SND_VMASTER=yCONFIG_SND_DMA_SGBUF=yCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_SEQUENCER_OSS=mCONFIG_SND_SEQ_HRTIMER_DEFAULT=yCONFIG_SND_SEQ_MIDI_EVENT=mCONFIG_SND_SEQ_MIDI=mCONFIG_SND_SEQ_MIDI_EMUL=mCONFIG_SND_SEQ_VIRMIDI=mCONFIG_SND_MPU401_UART=mCONFIG_SND_OPL3_LIB=mCONFIG_SND_OPL3_LIB_SEQ=mCONFIG_SND_VX_LIB=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_DRIVERS=yCONFIG_SND_PCSP=mCONFIG_SND_DUMMY=mCONFIG_SND_ALOOP=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not setCONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not setCONFIG_SND_AC97_POWER_SAVE=yCONFIG_SND_AC97_POWER_SAVE_DEFAULT=5CONFIG_SND_PCI=yCONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not setCONFIG_SND_ALI5451=mCONFIG_SND_ASIHPI=mCONFIG_SND_ATIIXP=mCONFIG_SND_ATIIXP_MODEM=mCONFIG_SND_AU8810=mCONFIG_SND_AU8820=mCONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not setCONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not setCONFIG_SND_CA0106=mCONFIG_SND_CMIPCI=mCONFIG_SND_OXYGEN_LIB=mCONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not setCONFIG_SND_CS46XX=mCONFIG_SND_CS46XX_NEW_DSP=yCONFIG_SND_CTXFI=mCONFIG_SND_DARLA20=mCONFIG_SND_GINA20=mCONFIG_SND_LAYLA20=mCONFIG_SND_DARLA24=mCONFIG_SND_GINA24=mCONFIG_SND_LAYLA24=mCONFIG_SND_MONA=mCONFIG_SND_MIA=mCONFIG_SND_ECHO3G=mCONFIG_SND_INDIGO=mCONFIG_SND_INDIGOIO=mCONFIG_SND_INDIGODJ=mCONFIG_SND_INDIGOIOX=mCONFIG_SND_INDIGODJX=mCONFIG_SND_EMU10K1=mCONFIG_SND_EMU10K1_SEQ=mCONFIG_SND_EMU10K1X=mCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not setCONFIG_SND_ES1968=mCONFIG_SND_ES1968_INPUT=yCONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not setCONFIG_SND_HDSP=mCONFIG_SND_HDSPM=mCONFIG_SND_ICE1712=mCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=mCONFIG_SND_INTEL8X0M=mCONFIG_SND_KORG1212=mCONFIG_SND_LOLA=mCONFIG_SND_LX6464ES=mCONFIG_SND_MAESTRO3=mCONFIG_SND_MAESTRO3_INPUT=yCONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not setCONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not setCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not setCONFIG_SND_TRIDENT=mCONFIG_SND_VIA82XX=mCONFIG_SND_VIA82XX_MODEM=mCONFIG_SND_VIRTUOSO=mCONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#CONFIG_SND_HDA=mCONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_INTEL_DETECT_DMIC is not setCONFIG_SND_HDA_HWDEP=yCONFIG_SND_HDA_RECONFIG=yCONFIG_SND_HDA_INPUT_BEEP=yCONFIG_SND_HDA_INPUT_BEEP_MODE=0CONFIG_SND_HDA_PATCH_LOADER=yCONFIG_SND_HDA_CODEC_REALTEK=mCONFIG_SND_HDA_CODEC_ANALOG=mCONFIG_SND_HDA_CODEC_SIGMATEL=mCONFIG_SND_HDA_CODEC_VIA=mCONFIG_SND_HDA_CODEC_HDMI=mCONFIG_SND_HDA_CODEC_CIRRUS=mCONFIG_SND_HDA_CODEC_CONEXANT=mCONFIG_SND_HDA_CODEC_CA0110=mCONFIG_SND_HDA_CODEC_CA0132=mCONFIG_SND_HDA_CODEC_CA0132_DSP=yCONFIG_SND_HDA_CODEC_CMEDIA=mCONFIG_SND_HDA_CODEC_SI3054=mCONFIG_SND_HDA_GENERIC=mCONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# end of HD-Audio
CONFIG_SND_HDA_CORE=mCONFIG_SND_HDA_DSP_LOADER=yCONFIG_SND_HDA_COMPONENT=yCONFIG_SND_HDA_I915=yCONFIG_SND_HDA_EXT_CORE=mCONFIG_SND_HDA_PREALLOC_SIZE=512CONFIG_SND_INTEL_NHLT=m
# CONFIG_SND_SPI is not setCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=yCONFIG_SND_USB_UA101=mCONFIG_SND_USB_USX2Y=mCONFIG_SND_USB_CAIAQ=mCONFIG_SND_USB_CAIAQ_INPUT=yCONFIG_SND_USB_US122L=mCONFIG_SND_USB_6FIRE=mCONFIG_SND_USB_HIFACE=mCONFIG_SND_BCD2000=mCONFIG_SND_USB_LINE6=mCONFIG_SND_USB_POD=mCONFIG_SND_USB_PODHD=mCONFIG_SND_USB_TONEPORT=mCONFIG_SND_USB_VARIAX=mCONFIG_SND_FIREWIRE=yCONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not setCONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not setCONFIG_SND_SOC=mCONFIG_SND_SOC_COMPRESS=yCONFIG_SND_SOC_TOPOLOGY=yCONFIG_SND_SOC_ACPI=m
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_SOC_AMD_ACP3x is not set
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_AUDMIX is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_FSL_MICFIL is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# end of SoC Audio for Freescale CPUs
# CONFIG_SND_I2S_HI6210_I2S is not set
# CONFIG_SND_SOC_IMG is not set CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y CONFIG_SND_SST_IPC=mCONFIG_SND_SST_IPC_ACPI=m CONFIG_SND_SOC_INTEL_SST_ACPI=m CONFIG_SND_SOC_INTEL_SST=m CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m CONFIG_SND_SOC_INTEL_HASWELL=m CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m CONFIG_SND_SOC_INTEL_SKYLAKE=m CONFIG_SND_SOC_INTEL_SKL=m CONFIG_SND_SOC_INTEL_APL=m CONFIG_SND_SOC_INTEL_KBL=m CONFIG_SND_SOC_INTEL_GLK=m CONFIG_SND_SOC_INTEL_CNL=m CONFIG_SND_SOC_INTEL_CFL=m
# CONFIG_SND_SOC_INTEL_CML_H is not set
# CONFIG_SND_SOC_INTEL_CML_LP is not set CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m
# CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC is not set CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m CONFIG_SND_SOC_ACPI_INTEL_MATCH=m CONFIG_SND_SOC_INTEL_MACH=y CONFIG_SND_SOC_INTEL_HASWELL_MACH=m CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
# CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH is not set # CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH is not set CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m # CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH is not set # CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH is not set # CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH is not set # CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH is not set # CONFIG_SND_SOC_MTK_BTCVSD is not set
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support
# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set # CONFIG_SND_SOC_XILINX_SPDIF is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
# CONFIG_ZX_TDM is not set CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
# CONFIG_SND_SOC_AC97_CODEC is not set
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_ADAU1761_I2C is not set
# CONFIG_SND_SOC_ADAU1761_SPI is not set
# CONFIG_SND_SOC_ADAU7002 is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4118 is not set
# CONFIG_SND_SOC_AK4458 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_AK5558 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_BD28623 is not set
# CONFIG_SND_SOC_BT_SCO is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS35L34 is not set
# CONFIG_SND_SOC_CS35L35 is not set
# CONFIG_SND_SOC_CS35L36 is not set
# CONFIG_SND_SOC_CS42L42 is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_CS43130 is not set
# CONFIG_SND_SOC_CS4341 is not set
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not set
# CONFIG_SND_SOC_CX2072X is not setCONFIG_SND_SOC_DA7213=mCONFIG_SND_SOC_DA7219=mCONFIG_SND_SOC_DMIC=m
# CONFIG_SND_SOC_ES7134 is not set
# CONFIG_SND_SOC_ES7241 is not setCONFIG_SND_SOC_ES8316=m
# CONFIG_SND_SOC_ES8328_I2C is not set
# CONFIG_SND_SOC_ES8328_SPI is not set
# CONFIG_SND_SOC_GTM601 is not setCONFIG_SND_SOC_HDAC_HDMI=m
# CONFIG_SND_SOC_INNO_RK3036 is not set
# CONFIG_SND_SOC_MAX98088 is not setCONFIG_SND_SOC_MAX98090=mCONFIG_SND_SOC_MAX98357A=m
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9867 is not setCONFIG_SND_SOC_MAX98927=m
# CONFIG_SND_SOC_MAX98373 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1789_I2C is not set
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM179X_SPI is not set
# CONFIG_SND_SOC_PCM186X_I2C is not set
# CONFIG_SND_SOC_PCM186X_SPI is not set
# CONFIG_SND_SOC_PCM3060_I2C is not set
# CONFIG_SND_SOC_PCM3060_SPI is not set
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_RK3328 is not setCONFIG_SND_SOC_RL6231=mCONFIG_SND_SOC_RL6347A=mCONFIG_SND_SOC_RT286=mCONFIG_SND_SOC_RT298=mCONFIG_SND_SOC_RT5514=mCONFIG_SND_SOC_RT5514_SPI=m
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not setCONFIG_SND_SOC_RT5640=mCONFIG_SND_SOC_RT5645=mCONFIG_SND_SOC_RT5651=mCONFIG_SND_SOC_RT5663=mCONFIG_SND_SOC_RT5670=mCONFIG_SND_SOC_RT5677=mCONFIG_SND_SOC_RT5677_SPI=m
# CONFIG_SND_SOC_SGTL5000 is not set
# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SSM2305 is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not setCONFIG_SND_SOC_SSM4567=m
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
# CONFIG_SND_SOC_TAS6424 is not set
# CONFIG_SND_SOC_TDA7419 is not set
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
# CONFIG_SND_SOC_TLV320AIC3X is not setCONFIG_SND_SOC_TS3A227E=m
# CONFIG_SND_SOC_TSCS42XX is not set
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_UDA1334 is not set
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8524 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8782 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8904 is not set
# CONFIG_SND_SOC_WM8960 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
# CONFIG_SND_SOC_ZX_AUD96P22 is not set
# CONFIG_SND_SOC_MAX9759 is not set
# CONFIG_SND_SOC_MT6351 is not set
# CONFIG_SND_SOC_MT6358 is not set
# CONFIG_SND_SOC_NAU8540 is not set
# CONFIG_SND_SOC_NAU8810 is not set
# CONFIG_SND_SOC_NAU8822 is not setCONFIG_SND_SOC_NAU8824=mCONFIG_SND_SOC_NAU8825=m
# CONFIG_SND_SOC_TPA6130A2 is not set
# end of CODEC drivers
# CONFIG_SND_SIMPLE_CARD is not setCONFIG_SND_X86=yCONFIG_HDMI_LPE_AUDIO=mCONFIG_SND_SYNTH_EMUX=m
# CONFIG_SND_XEN_FRONTEND is not setCONFIG_AC97_BUS=m
#
# HID support
#CONFIG_HID=yCONFIG_HID_BATTERY_STRENGTH=yCONFIG_HIDRAW=yCONFIG_UHID=mCONFIG_HID_GENERIC=y
#
# Special HID drivers
#CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not setCONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not setCONFIG_HID_APPLE=yCONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not setCONFIG_HID_AUREAL=mCONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not setCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not setCONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not setCONFIG_HID_CYPRESS=yCONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not setCONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not setCONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not setCONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not setCONFIG_HID_KEYTOUCH=mCONFIG_HID_KYE=mCONFIG_HID_UCLOGIC=mCONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not setCONFIG_HID_GYRATION=mCONFIG_HID_ICADE=mCONFIG_HID_ITE=y
# CONFIG_HID_JABRA is not setCONFIG_HID_TWINHAN=mCONFIG_HID_KENSINGTON=yCONFIG_HID_LCPOWER=mCONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not setCONFIG_HID_LOGITECH=yCONFIG_HID_LOGITECH_DJ=mCONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not setCONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not setCONFIG_HID_REDRAGON=yCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=yCONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTI is not setCONFIG_HID_NTRIG=yCONFIG_HID_ORTEK=mCONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not setCONFIG_HID_PETALYNX=mCONFIG_HID_PICOLCD=mCONFIG_HID_PICOLCD_FB=yCONFIG_HID_PICOLCD_BACKLIGHT=yCONFIG_HID_PICOLCD_LCD=yCONFIG_HID_PICOLCD_LEDS=yCONFIG_HID_PICOLCD_CIR=yCONFIG_HID_PLANTRONICS=yCONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not setCONFIG_HID_ROCCAT=mCONFIG_HID_SAITEK=mCONFIG_HID_SAMSUNG=mCONFIG_HID_SONY=m
# CONFIG_SONY_FF is not setCONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not setCONFIG_HID_STEELSERIES=mCONFIG_HID_SUNPLUS=mCONFIG_HID_RMI=mCONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not setCONFIG_HID_HYPERV_MOUSE=mCONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not setCONFIG_HID_TIVO=mCONFIG_HID_TOPSEED=mCONFIG_HID_THINGM=mCONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not setCONFIG_HID_WACOM=mCONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not setCONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not setCONFIG_HID_ZYDACRON=mCONFIG_HID_SENSOR_HUB=mCONFIG_HID_SENSOR_CUSTOM_SENSOR=mCONFIG_HID_ALPS=m
# end of Special HID drivers
#
# USB HID support
#CONFIG_USB_HID=yCONFIG_HID_PID=yCONFIG_USB_HIDDEV=y
# end of USB HID support
#
# I2C HID support
#CONFIG_I2C_HID=m
# end of I2C HID support
#
# Intel ISH HID support
#CONFIG_INTEL_ISH_HID=y
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support # end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not setCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=yCONFIG_USB_PCI=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not setCONFIG_USB_LEDS_TRIGGER_USBPORT=mCONFIG_USB_AUTOSUSPEND_DELAY=2CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not setCONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not setCONFIG_USB_OHCI_HCD=yCONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not setCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=mCONFIG_USB_WDM=mCONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_REALTEK=m CONFIG_REALTEK_AUTOPM=y CONFIG_USB_STORAGE_DATAFAB=m CONFIG_USB_STORAGE_FREECOM=m CONFIG_USB_STORAGE_ISD200=m CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=m CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_STORAGE_ENE_UB6250=m CONFIG_USB_UAS=m
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_MICROTEK=mCONFIG_USBIP_CORE=m
# CONFIG_USBIP_VHCI_HCD is not set
# CONFIG_USBIP_HOST is not set
# CONFIG_USBIP_DEBUG is not set
# CONFIG_USB_CDNS3 is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#CONFIG_USB_USS720=mCONFIG_USB_SERIAL=yCONFIG_USB_SERIAL_CONSOLE=yCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not setCONFIG_USB_SERIAL_AIRCABLE=mCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_CH341=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP210X=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not setCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_IUU=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not setCONFIG_USB_SERIAL_MOS7720=mCONFIG_USB_SERIAL_MOS7715_PARPORT=yCONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not setCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_OTI6858=mCONFIG_USB_SERIAL_QCAUX=mCONFIG_USB_SERIAL_QUALCOMM=mCONFIG_USB_SERIAL_SPCP8X5=mCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=yCONFIG_USB_SERIAL_SIERRAWIRELESS=mCONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not setCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_WWAN=mCONFIG_USB_SERIAL_OPTION=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_SERIAL_OPTICON=mCONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not setCONFIG_USB_SERIAL_SSU100=mCONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not setCONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=mCONFIG_USB_ADUTUX=mCONFIG_USB_SEVSEG=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not setCONFIG_USB_IDMOUSE=mCONFIG_USB_FTDI_ELAN=mCONFIG_USB_APPLEDISPLAY=mCONFIG_USB_SISUSBVGA=mCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not setCONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not setCONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not setCONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not setCONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not setCONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=mCONFIG_USB_UEAGLEATM=mCONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not setCONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not setCONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not setCONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set
#
# USB Type-C Multiplexer/DeMultiplexer Switch support #
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
# CONFIG_USB_ROLE_SWITCH is not setCONFIG_MMC=mCONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_MINORS=8CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not setCONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_IO_ACCESSORS=yCONFIG_MMC_SDHCI_PCI=mCONFIG_MMC_RICOH_MMC=yCONFIG_MMC_SDHCI_ACPI=mCONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not setCONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not setCONFIG_MMC_CB710=mCONFIG_MMC_VIA_SDMMC=mCONFIG_MMC_VUB300=mCONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not setCONFIG_MMC_CQHCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not setCONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not setCONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=mCONFIG_MEMSTICK_JMICRON_38X=mCONFIG_MEMSTICK_R592=mCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_APU is not setCONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not setCONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not setCONFIG_LEDS_LP55XX_COMMON=mCONFIG_LEDS_LP5521=mCONFIG_LEDS_LP5523=mCONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not setCONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not setCONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not setCONFIG_LEDS_TRIGGER_HEARTBEAT=mCONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not setCONFIG_LEDS_TRIGGER_GPIO=mCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=m CONFIG_LEDS_TRIGGER_CAMERA=m # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_LEDS_TRIGGER_NETDEV is not set # CONFIG_LEDS_TRIGGER_PATTERN is not set CONFIG_LEDS_TRIGGER_AUDIO=m # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_EDAC=y CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_DECODE_MCE=m CONFIG_EDAC_GHES=y CONFIG_EDAC_AMD64=m # CONFIG_EDAC_AMD64_ERROR_INJECTION is not set CONFIG_EDAC_E752X=m CONFIG_EDAC_I82975X=m CONFIG_EDAC_I3000=m CONFIG_EDAC_I3200=m CONFIG_EDAC_IE31200=m CONFIG_EDAC_X38=m CONFIG_EDAC_I5400=m CONFIG_EDAC_I7CORE=m CONFIG_EDAC_I5000=m CONFIG_EDAC_I5100=m CONFIG_EDAC_I7300=m CONFIG_EDAC_SBRIDGE=m CONFIG_EDAC_SKX=m # CONFIG_EDAC_I10NM is not set CONFIG_EDAC_PND2=m CONFIG_RTC_LIB=y CONFIG_RTC_MC146818_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_SYSTOHC is not set # CONFIG_RTC_DEBUG is not set CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not setCONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not setCONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not setCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_MAX6900=mCONFIG_RTC_DRV_RS5C372=mCONFIG_RTC_DRV_ISL1208=mCONFIG_RTC_DRV_ISL12022=mCONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not setCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_M41T80=mCONFIG_RTC_DRV_M41T80_WDT=yCONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not setCONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not setCONFIG_RTC_DRV_RX8581=mCONFIG_RTC_DRV_RX8025=mCONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not setCONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not setCONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#CONFIG_RTC_DRV_DS3232=mCONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not setCONFIG_RTC_DRV_RV3029C2=mCONFIG_RTC_DRV_RV3029_HWMON=y
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=yCONFIG_RTC_DRV_DS1286=mCONFIG_RTC_DRV_DS1511=mCONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not setCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_DS2404=mCONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not setCONFIG_RTC_DRV_M48T35=mCONFIG_RTC_DRV_M48T59=mCONFIG_RTC_DRV_MSM6242=mCONFIG_RTC_DRV_BQ4802=mCONFIG_RTC_DRV_RP5C01=mCONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
2,052 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Re: [refcount] d2d337b185: WARNING:at_lib/refcount.c:#refcount_warn_saturate
Quoted 17 lines · kernel test robot
FYI, we noticed the following commit (built with gcc-7):
commit:
d2d337b185bd2abff262f3cf7de0080b3888e41c("[RESEND PATCH v4 08/10] refcount: Consolidate implementations ofrefcount_t")
url: https://github.com/0day-ci/linux/commits/Will-Deacon/Rework-REFCOUNT_FULL-using-atomic_fetch_-operations/20191124-052413in testcase: ocfs2test
with following parameters:disk: 1SSD
test: test-mkfson test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 8G
Quoted 8 lines
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
+-----------------------------------------------------------------------------+------------+------------+ | | 2ab80bd4ae | d2d337b185 | +-----------------------------------------------------------------------------+------------+------------+ | boot_successes | 0 | 0 | | boot_failures | 24 | 24 |
So we went from a success rate of 0 out of 24 to 0 out of 24 by applying that patch. How on earth is that a result that justifies spamming everybody?
Quoted 141 lines
| BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/rwsem.c | 24 | 24 | | stack_segment:#[##] | 6 | 6 | | RIP:__kmalloc | 8 | 6 | | Kernel_panic-not_syncing:Fatal_exception | 14 | 11 | | kernel_BUG_at_mm/slub.c | 9 | 4 | | invalid_opcode:#[##] | 9 | 4 | | RIP:kfree | 9 | 4 | | RIP:native_safe_halt | 4 | 1 | | Kernel_panic-not_syncing:Fatal_exception_in_interrupt | 6 | 2 | | BUG:unable_to_handle_page_fault_for_address | 5 | 1 | | Oops:#[##] | 5 | 1 | | RIP:kmem_cache_alloc_trace | 3 | 3 | | RIP:idr_get_free | 1 | | | RIP:console_unlock | 1 | | | WARNING:at_lib/refcount.c:#refcount_warn_saturate | 0 | 9 | | RIP:refcount_warn_saturate | 0 | 9 | | general_protection_fault:#[##] | 0 | 2 | | RIP:lru_cache_add_active_or_unevictable | 0 | 1 | +-----------------------------------------------------------------------------+------------+------------+If you fix the issue, kindly add following tag
Reported-by kernel test robot <[email protected]>[ 93.421220] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1533 [ 93.423478] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2464, name: mount.ocfs2 [ 93.425258] CPU: 1 PID: 2464 Comm: mount.ocfs2 Not tainted 5.4.0-rc3-00012-gd2d337b185bd2 #1 [ 93.428185] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 93.430982] Call Trace: [ 93.432691] dump_stack+0x5c/0x7b [ 93.434089] ___might_sleep+0x102/0x120 [ 93.435629] down_write+0x1c/0x50 [ 93.436962] configfs_depend_item+0x3a/0xb0 [ 93.438580] o2hb_region_pin+0xf9/0x180 [ocfs2_nodemanager] [ 93.440630] ? inode_doinit_with_dentry+0x250/0x4e0 [ 93.441860] o2hb_register_callback+0xc6/0x2a0 [ocfs2_nodemanager] [ 93.443298] dlm_join_domain+0xbd/0x790 [ocfs2_dlm] [ 93.444491] ? debugfs_create_dir+0xc4/0x100 [ 93.445635] ? dlm_alloc_ctxt+0x42f/0x560 [ocfs2_dlm] [ 93.446905] dlm_register_domain+0x31f/0x440 [ocfs2_dlm] [ 93.448188] ? _cond_resched+0x19/0x30 [ 93.449248] o2cb_cluster_connect+0x132/0x2c0 [ocfs2_stack_o2cb] [ 93.450701] ocfs2_cluster_connect+0x14b/0x220 [ocfs2_stackglue] [ 93.452151] ocfs2_dlm_init+0x2e9/0x4b0 [ocfs2] [ 93.453379] ? ocfs2_init_node_maps+0x50/0x50 [ocfs2] [ 93.454700] ocfs2_fill_super+0xcf4/0x12a0 [ocfs2] [ 93.455952] ? ocfs2_initialize_super+0x1030/0x1030 [ocfs2] [ 93.457484] mount_bdev+0x173/0x1b0 [ 93.458543] legacy_get_tree+0x27/0x40 [ 93.459615] vfs_get_tree+0x25/0xc0 [ 93.460650] do_mount+0x715/0x9a0 [ 93.461697] ksys_mount+0x80/0xd0 [ 93.462728] __x64_sys_mount+0x21/0x30 [ 93.463802] do_syscall_64+0x5b/0x1d0 [ 93.464867] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 93.466224] RIP: 0033:0x7feaa42ee48a [ 93.467282] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d de f9 2a 00 f7 d8 64 89 01 48 [ 93.472861] RSP: 002b:00007ffec903d4e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 93.475973] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007feaa42ee48a [ 93.479041] RDX: 0000562b43aae3ee RSI: 0000562b444af0b0 RDI: 0000562b444af310 [ 93.481956] RBP: 00007ffec903d690 R08: 0000562b444af2b0 R09: 0000000000000020 [ 93.485084] R10: 0000000000000000 R11: 0000000000000206 R12: 00007ffec903d580 [ 93.488128] R13: 0000000000000000 R14: 0000562b444b0000 R15: 00007ffec903d500 [ 93.494821] o2dlm: Joining domain 58A89FF3B793441A83C86B6A7816B4AF [ 93.494822] ( [ 93.499229] 1 [ 93.501238] ) 1 nodes [ 93.509977] JBD2: Ignoring recovery information on journal [ 93.518913] ocfs2: Mounting device (8,0) on (node 1, slot 0) with ordered data mode. [ 94.541086] mount /dev/sda /mnt/ocfs2 /dev/sda 16515072 243712 16271360 2% /mnt/ocfs2 [ 94.541090] [ 94.546474] OK [ 94.546476] [ 94.550726] create testdir /mnt/ocfs2/20191130_125727 [ 94.550729] [ 94.713069] create 15890 files . [ 94.713072] [ 94.717547] [ 98.760820] o2dlm: Leaving domain 58A89FF3B793441A83C86B6A7816B4AF [ 98.828610] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 98.830929] floppy: error 10 while reading block 0 [ 99.561301] ocfs2: Unmounting device (8,0) on (node 1) [ 99.563700] ------------[ cut here ]------------ [ 99.566425] refcount_t: underflow; use-after-free. [ 99.569213] WARNING: CPU: 1 PID: 2531 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0 [ 99.574231] Modules linked in: ocfs2_stack_o2cb ocfs2_dlm ocfs2 ocfs2_nodemanager ocfs2_stackglue jbd2 sr_mod intel_rapl_msr cdrom ata_generic pata_acpi intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sd_mod sg bochs_drm ppdev drm_vram_helper ttm drm_kms_helper snd_pcm syscopyarea ata_piix sysfillrect aesni_intel sysimgblt snd_timer fb_sys_fops crypto_simd libata drm cryptd glue_helper snd soundcore pcspkr joydev serio_raw virtio_scsi i2c_piix4 floppy parport_pc parport ip_tables [ 99.593419] CPU: 1 PID: 2531 Comm: umount Tainted: G W 5.4.0-rc3-00012-gd2d337b185bd2 #1 [ 99.597311] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 99.604305] RIP: 0010:refcount_warn_saturate+0x8d/0xf0 [ 99.607073] Code: 05 ce 6f 37 01 01 e8 32 a0 c1 ff 0f 0b c3 80 3d c1 6f 37 01 00 75 ad 48 c7 c7 e0 9f 73 a5 c6 05 b1 6f 37 01 01 e8 13 a0 c1 ff <0f> 0b c3 80 3d a5 6f 37 01 00 75 8e 48 c7 c7 60 9f 73 a5 c6 05 95 [ 99.612363] RSP: 0018:ffffa895c0457e20 EFLAGS: 00010282 [ 99.613931] RAX: 0000000000000000 RBX: ffff8d07e654e000 RCX: 0000000000000000 [ 99.615800] RDX: ffff8d083fd27640 RSI: ffff8d083fd17778 RDI: ffff8d083fd17778 [ 99.617687] RBP: ffff8d07db479000 R08: 000000000000050a R09: 0000000000aaaaaa [ 99.619574] R10: ffffa895c0457c48 R11: ffff8d0817a4cf20 R12: ffffa895c0457e34 [ 99.621486] R13: ffff8d07e654e240 R14: ffff8d07e654e0c8 R15: 0000000000000000 [ 99.623382] FS: 00007f39e9509e40(0000) GS:ffff8d083fd00000(0000) knlGS:0000000000000000 [ 99.625452] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.627106] CR2: 00000000004216d0 CR3: 00000001d2bfe000 CR4: 00000000000406e0 [ 99.628995] Call Trace: [ 99.630127] ocfs2_dismount_volume+0x32a/0x3e0 [ocfs2] [ 99.631667] generic_shutdown_super+0x6c/0x120 [ 99.633102] kill_block_super+0x21/0x50 [ 99.634424] deactivate_locked_super+0x3f/0x70 [ 99.635843] cleanup_mnt+0xb8/0x150 [ 99.637130] task_work_run+0xa3/0xe0 [ 99.638407] exit_to_usermode_loop+0xeb/0xf0 [ 99.639827] do_syscall_64+0x1a7/0x1d0 [ 99.641185] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 99.643068] RIP: 0033:0x7f39e8dedd77 [ 99.644352] Code: 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 00 00 00 b8 a6 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f1 00 2b 00 f7 d8 64 89 01 48 [ 99.649122] RSP: 002b:00007fffc63b9bf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 99.651318] RAX: 0000000000000000 RBX: 0000557e0db2e080 RCX: 00007f39e8dedd77 [ 99.653282] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000557e0db2e260 [ 99.655401] RBP: 0000557e0db2e260 R08: 0000557e0db2f600 R09: 0000000000000015 [ 99.657366] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f39e92efe64 [ 99.659581] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fffc63b9e80 [ 99.661503] ---[ end trace eed33931ffa30ed0 ]---To reproduce:
# build kernel cd linux cp config-5.4.0-rc3-00012-gd2d337b185bd2 .config make HOSTCC=gcc-7 CC=gcc-7 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules make HOSTCC=gcc-7 CC=gcc-7 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install cd <mod-install-dir> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgzgit clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this emailThanks,
Rong Chen
Re: [LKP] Re: [refcount] d2d337b185: WARNING:at_lib/refcount.c:#refcount_warn_saturate
Quoted 20 lines · Ard Biesheuvel
Quoted 19 lines · kernel test robot
FYI, we noticed the following commit (built with gcc-7):
commit:
d2d337b185bd2abff262f3cf7de0080b3888e41c("[RESEND PATCH v4 08/10] refcount: Consolidate implementations ofrefcount_t")
url: https://github.com/0day-ci/linux/commits/Will-Deacon/Rework-REFCOUNT_FULL-using-atomic_fetch_-operations/20191124-052413in testcase: ocfs2test
with following parameters:disk: 1SSD
test: test-mkfson test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 8G
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
Quoted 8 lines
Quoted 5 lines
+-----------------------------------------------------------------------------+------------+------------+ | | 2ab80bd4ae | d2d337b185 | +-----------------------------------------------------------------------------+------------+------------+ | boot_successes | 0 | 0 | | boot_failures | 24 | 24 |So we went from a success rate of 0 out of 24 to 0 out of 24 by applying that patch. How on earth is that a result that justifies spamming everybody?
Hi Ard,
These failures were triggered by ocfs2test test, and all tests were failed include parent commit "2ab80bd4ae".
Quoted 17 lines
Quoted 17 lines
| BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/rwsem.c | 24 | 24 | | stack_segment:#[##] | 6 | 6 | | RIP:__kmalloc | 8 | 6 | | Kernel_panic-not_syncing:Fatal_exception | 14 | 11 | | kernel_BUG_at_mm/slub.c | 9 | 4 | | invalid_opcode:#[##] | 9 | 4 | | RIP:kfree | 9 | 4 | | RIP:native_safe_halt | 4 | 1 | | Kernel_panic-not_syncing:Fatal_exception_in_interrupt | 6 | 2 | | BUG:unable_to_handle_page_fault_for_address | 5 | 1 | | Oops:#[##] | 5 | 1 | | RIP:kmem_cache_alloc_trace | 3 | 3 | | RIP:idr_get_free | 1 | | | RIP:console_unlock | 1 | | | WARNING:at_lib/refcount.c:#refcount_warn_saturate | 0 | 9 | | RIP:refcount_warn_saturate | 0 | 9 |
The difference is that commit "d2d337b185" introduces new errors. e.g. RIP:refcount_warn_saturate
In addition, you can get the dmesg file in previous report email.
Please feel free to contact us if you need more information, and please forgive us if we got something
wrong.
Best Regards,
Rong Chen
Quoted 128 lines
Quoted 116 lines
| general_protection_fault:#[##] | 0 | 2 | | RIP:lru_cache_add_active_or_unevictable | 0 | 1 | +-----------------------------------------------------------------------------+------------+------------+If you fix the issue, kindly add following tag
Reported-by kernel test robot <[email protected]>[ 93.421220] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1533 [ 93.423478] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2464, name: mount.ocfs2 [ 93.425258] CPU: 1 PID: 2464 Comm: mount.ocfs2 Not tainted 5.4.0-rc3-00012-gd2d337b185bd2 #1 [ 93.428185] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 93.430982] Call Trace: [ 93.432691] dump_stack+0x5c/0x7b [ 93.434089] ___might_sleep+0x102/0x120 [ 93.435629] down_write+0x1c/0x50 [ 93.436962] configfs_depend_item+0x3a/0xb0 [ 93.438580] o2hb_region_pin+0xf9/0x180 [ocfs2_nodemanager] [ 93.440630] ? inode_doinit_with_dentry+0x250/0x4e0 [ 93.441860] o2hb_register_callback+0xc6/0x2a0 [ocfs2_nodemanager] [ 93.443298] dlm_join_domain+0xbd/0x790 [ocfs2_dlm] [ 93.444491] ? debugfs_create_dir+0xc4/0x100 [ 93.445635] ? dlm_alloc_ctxt+0x42f/0x560 [ocfs2_dlm] [ 93.446905] dlm_register_domain+0x31f/0x440 [ocfs2_dlm] [ 93.448188] ? _cond_resched+0x19/0x30 [ 93.449248] o2cb_cluster_connect+0x132/0x2c0 [ocfs2_stack_o2cb] [ 93.450701] ocfs2_cluster_connect+0x14b/0x220 [ocfs2_stackglue] [ 93.452151] ocfs2_dlm_init+0x2e9/0x4b0 [ocfs2] [ 93.453379] ? ocfs2_init_node_maps+0x50/0x50 [ocfs2] [ 93.454700] ocfs2_fill_super+0xcf4/0x12a0 [ocfs2] [ 93.455952] ? ocfs2_initialize_super+0x1030/0x1030 [ocfs2] [ 93.457484] mount_bdev+0x173/0x1b0 [ 93.458543] legacy_get_tree+0x27/0x40 [ 93.459615] vfs_get_tree+0x25/0xc0 [ 93.460650] do_mount+0x715/0x9a0 [ 93.461697] ksys_mount+0x80/0xd0 [ 93.462728] __x64_sys_mount+0x21/0x30 [ 93.463802] do_syscall_64+0x5b/0x1d0 [ 93.464867] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 93.466224] RIP: 0033:0x7feaa42ee48a [ 93.467282] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d de f9 2a 00 f7 d8 64 89 01 48 [ 93.472861] RSP: 002b:00007ffec903d4e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 93.475973] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007feaa42ee48a [ 93.479041] RDX: 0000562b43aae3ee RSI: 0000562b444af0b0 RDI: 0000562b444af310 [ 93.481956] RBP: 00007ffec903d690 R08: 0000562b444af2b0 R09: 0000000000000020 [ 93.485084] R10: 0000000000000000 R11: 0000000000000206 R12: 00007ffec903d580 [ 93.488128] R13: 0000000000000000 R14: 0000562b444b0000 R15: 00007ffec903d500 [ 93.494821] o2dlm: Joining domain 58A89FF3B793441A83C86B6A7816B4AF [ 93.494822] ( [ 93.499229] 1 [ 93.501238] ) 1 nodes [ 93.509977] JBD2: Ignoring recovery information on journal [ 93.518913] ocfs2: Mounting device (8,0) on (node 1, slot 0) with ordered data mode. [ 94.541086] mount /dev/sda /mnt/ocfs2 /dev/sda 16515072 243712 16271360 2% /mnt/ocfs2 [ 94.541090] [ 94.546474] OK [ 94.546476] [ 94.550726] create testdir /mnt/ocfs2/20191130_125727 [ 94.550729] [ 94.713069] create 15890 files . [ 94.713072] [ 94.717547] [ 98.760820] o2dlm: Leaving domain 58A89FF3B793441A83C86B6A7816B4AF [ 98.828610] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 98.830929] floppy: error 10 while reading block 0 [ 99.561301] ocfs2: Unmounting device (8,0) on (node 1) [ 99.563700] ------------[ cut here ]------------ [ 99.566425] refcount_t: underflow; use-after-free. [ 99.569213] WARNING: CPU: 1 PID: 2531 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0 [ 99.574231] Modules linked in: ocfs2_stack_o2cb ocfs2_dlm ocfs2 ocfs2_nodemanager ocfs2_stackglue jbd2 sr_mod intel_rapl_msr cdrom ata_generic pata_acpi intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sd_mod sg bochs_drm ppdev drm_vram_helper ttm drm_kms_helper snd_pcm syscopyarea ata_piix sysfillrect aesni_intel sysimgblt snd_timer fb_sys_fops crypto_simd libata drm cryptd glue_helper snd soundcore pcspkr joydev serio_raw virtio_scsi i2c_piix4 floppy parport_pc parport ip_tables [ 99.593419] CPU: 1 PID: 2531 Comm: umount Tainted: G W 5.4.0-rc3-00012-gd2d337b185bd2 #1 [ 99.597311] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 99.604305] RIP: 0010:refcount_warn_saturate+0x8d/0xf0 [ 99.607073] Code: 05 ce 6f 37 01 01 e8 32 a0 c1 ff 0f 0b c3 80 3d c1 6f 37 01 00 75 ad 48 c7 c7 e0 9f 73 a5 c6 05 b1 6f 37 01 01 e8 13 a0 c1 ff <0f> 0b c3 80 3d a5 6f 37 01 00 75 8e 48 c7 c7 60 9f 73 a5 c6 05 95 [ 99.612363] RSP: 0018:ffffa895c0457e20 EFLAGS: 00010282 [ 99.613931] RAX: 0000000000000000 RBX: ffff8d07e654e000 RCX: 0000000000000000 [ 99.615800] RDX: ffff8d083fd27640 RSI: ffff8d083fd17778 RDI: ffff8d083fd17778 [ 99.617687] RBP: ffff8d07db479000 R08: 000000000000050a R09: 0000000000aaaaaa [ 99.619574] R10: ffffa895c0457c48 R11: ffff8d0817a4cf20 R12: ffffa895c0457e34 [ 99.621486] R13: ffff8d07e654e240 R14: ffff8d07e654e0c8 R15: 0000000000000000 [ 99.623382] FS: 00007f39e9509e40(0000) GS:ffff8d083fd00000(0000) knlGS:0000000000000000 [ 99.625452] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.627106] CR2: 00000000004216d0 CR3: 00000001d2bfe000 CR4: 00000000000406e0 [ 99.628995] Call Trace: [ 99.630127] ocfs2_dismount_volume+0x32a/0x3e0 [ocfs2] [ 99.631667] generic_shutdown_super+0x6c/0x120 [ 99.633102] kill_block_super+0x21/0x50 [ 99.634424] deactivate_locked_super+0x3f/0x70 [ 99.635843] cleanup_mnt+0xb8/0x150 [ 99.637130] task_work_run+0xa3/0xe0 [ 99.638407] exit_to_usermode_loop+0xeb/0xf0 [ 99.639827] do_syscall_64+0x1a7/0x1d0 [ 99.641185] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 99.643068] RIP: 0033:0x7f39e8dedd77 [ 99.644352] Code: 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 00 00 00 b8 a6 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f1 00 2b 00 f7 d8 64 89 01 48 [ 99.649122] RSP: 002b:00007fffc63b9bf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 99.651318] RAX: 0000000000000000 RBX: 0000557e0db2e080 RCX: 00007f39e8dedd77 [ 99.653282] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000557e0db2e260 [ 99.655401] RBP: 0000557e0db2e260 R08: 0000557e0db2f600 R09: 0000000000000015 [ 99.657366] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f39e92efe64 [ 99.659581] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fffc63b9e80 [ 99.661503] ---[ end trace eed33931ffa30ed0 ]---To reproduce:
# build kernel cd linux cp config-5.4.0-rc3-00012-gd2d337b185bd2 .config make HOSTCC=gcc-7 CC=gcc-7 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules make HOSTCC=gcc-7 CC=gcc-7 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install cd <mod-install-dir> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgzQuoted 9 lines
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this emailThanks,
Rong Chen_______________________________________________
LKP mailing list -- lkp(a)lists.01.org
To unsubscribe send an email to lkp-leave(a)lists.01.org
Will Deacon
maintainerRe: [LKP] Re: [refcount] d2d337b185: WARNING:at_lib/refcount.c:#refcount_warn_saturate
Quoted 16 lines · Rong Chen
Quoted 15 lines · Ard Biesheuvel
Quoted 14 lines · kernel test robot
FYI, we noticed the following commit (built with gcc-7):
commit:
d2d337b185bd2abff262f3cf7de0080b3888e41c("[RESEND PATCH v4 08/10] refcount: Consolidate implementations ofrefcount_t") url:
https://github.com/0day-ci/linux/commits/Will-Deacon/Rework-REFCOUNT_FULL-using-atomic_fetch_-operations/20191124-052413in testcase: ocfs2test
with following parameters:disk: 1SSD
test: test-mkfs
Quoted 6 lines
Quoted 3 lines
So we went from a success rate of 0 out of 24 to 0 out of 24 by applying that patch. How on earth is that a result that justifies spamming everybody?
These failures were triggered by ocfs2test test, and all tests were failed include parent commit "
2ab80bd4ae".
https://lore.kernel.org/lkml/20191119182745.GA11397(a)willie-the-truck
https://lore.kernel.org/lkml/20190912105640.2l6mtdjmcyyhmyun(a)willie-the-truck/
The refcount code is doing its job afaict and its the ocfs2 code at fault.
Will
Re: [LKP] Re: [refcount] d2d337b185: WARNING:at_lib/refcount.c:#refcount_warn_saturate
Quoted 20 lines · Will Deacon
Quoted 19 lines · Rong Chen
Quoted 18 lines · Ard Biesheuvel
Quoted 8 lines · kernel test robot
FYI, we noticed the following commit (built with gcc-7):
commit:
d2d337b185bd2abff262f3cf7de0080b3888e41c("[RESEND PATCH v4 08/10] refcount: Consolidate implementations ofrefcount_t") url:
https://github.com/0day-ci/linux/commits/Will-Deacon/Rework-REFCOUNT_FULL-using-atomic_fetch_-operations/20191124-052413Quoted 6 lines
in testcase: ocfs2test
with following parameters:disk: 1SSD
test: test-mkfsSo we went from a success rate of 0 out of 24 to 0 out of 24 by applying that patch. How on earth is that a result that justifies spamming everybody?
Quoted 8 lines
Quoted 2 lines
These failures were triggered by ocfs2test test, and all tests were failed include parent commit "
2ab80bd4ae".https://lore.kernel.org/lkml/20191119182745.GA11397(a)willie-the-truck
https://lore.kernel.org/lkml/20190912105640.2l6mtdjmcyyhmyun(a)willie-the-truck/The refcount code is doing its job afaict and its the ocfs2 code at fault.
Will
Hi Will,
Thanks for your explanation, we'll disable the test.
Best Regards,
Rong Chen
Will Deacon
maintainerPATCH RESEND v4 9/10 lib/refcount: Remove unused 'refcount_error_report()' function
In reply to Will Deacon'refcount_error_report()' has no callers. Remove it.
--- include/linux/kernel.h | 7 ------- kernel/panic.c | 11 ----------- 2 files changed, 18 deletions(-)
include/linux/kernel.h +0 -7
@@ -328,13 +328,6 @@ extern int oops_may_print(void);void do_exit (long error_code)__noreturn ;void complete_and_exit (struct completion *,long )__noreturn ; -#ifdef CONFIG_ARCH_HAS_REFCOUNT -void refcount_error_report (struct pt_regs *regs,const char *err); -#else -static inline void refcount_error_report (struct pt_regs *regs,const char *err) -{ } -#endif -/* Internal, do not use. */ int __must_check _kstrtoul (const char *s,unsigned int base,unsigned long *res);int __must_check _kstrtol (const char *s,unsigned int base,long *res);
kernel/panic.c +0 -11
@@ -670,17 +670,6 @@ EXPORT_SYMBOL(__stack_chk_fail);#endif -#ifdef CONFIG_ARCH_HAS_REFCOUNT -void refcount_error_report (struct pt_regs *regs,const char *err) -{ -WARN_RATELIMIT (1 ,"refcount_t %s at %pB in %s[%d], uid/euid: %u/%u\n" , - err, (void *)instruction_pointer (regs), - current->comm,task_pid_nr (current), -from_kuid_munged (&init_user_ns,current_uid ()), -from_kuid_munged (&init_user_ns,current_euid ())); -} -#endif -core_param (panic, panic_timeout, int,0644 );core_param (panic_print, panic_print, ulong,0644 );core_param (pause_on_oops, pause_on_oops, int,0644 );
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
[tip: locking/core] locking/refcount: Remove unused 'refcount_error_report()' function
The following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: 2f30b36943adca070f2e1551f701bd524ed1ae5a Gitweb: https://git.kernel.org/tip/2f30b36943adca070f2e1551f701bd524ed1ae5a Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:59:01 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:15:42 +01:00
locking/refcount: Remove unused 'refcount_error_report()' function
'refcount_error_report()' has no callers. Remove it.
--- include/linux/kernel.h | 7 ------- kernel/panic.c | 11 ----------- 2 files changed, 18 deletions(-)
include/linux/kernel.h +0 -7
@@ -328,13 +328,6 @@ extern int oops_may_print(void);void do_exit (long error_code)__noreturn ;void complete_and_exit (struct completion *,long )__noreturn ; -#ifdef CONFIG_ARCH_HAS_REFCOUNT -void refcount_error_report (struct pt_regs *regs,const char *err); -#else -static inline void refcount_error_report (struct pt_regs *regs,const char *err) -{ } -#endif -/* Internal, do not use. */ int __must_check _kstrtoul (const char *s,unsigned int base,unsigned long *res);int __must_check _kstrtol (const char *s,unsigned int base,long *res);
kernel/panic.c +0 -11
@@ -671,17 +671,6 @@ EXPORT_SYMBOL(__stack_chk_fail);#endif -#ifdef CONFIG_ARCH_HAS_REFCOUNT -void refcount_error_report (struct pt_regs *regs,const char *err) -{ -WARN_RATELIMIT (1 ,"refcount_t %s at %pB in %s[%d], uid/euid: %u/%u\n" , - err, (void *)instruction_pointer (regs), - current->comm,task_pid_nr (current), -from_kuid_munged (&init_user_ns,current_uid ()), -from_kuid_munged (&init_user_ns,current_euid ())); -} -#endif -core_param (panic, panic_timeout, int,0644 );core_param (panic_print, panic_print, ulong,0644 );core_param (pause_on_oops, pause_on_oops, int,0644 );
Will Deacon
maintainerPATCH RESEND v4 10/10 drivers/lkdtm: Remove references to CONFIG_REFCOUNT_FULL
In reply to Will DeaconCONFIG_REFCOUNT_FULL no longer exists, so remove all references to it.
--- drivers/misc/lkdtm/refcount.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/misc/lkdtm/refcount.c +1 -2
@@ -119,7 +119,7 @@ void lkdtm_REFCOUNT_DEC_ZERO(void)static void check_negative (refcount_t *ref,int start) {/* -* CONFIG_REFCOUNT_FULL refuses to move a refcount at all on an +* refcount_t refuses to move a refcount at all on an * over-sub, so we have to track our starting position instead of * looking only at zero-pinning. */
@@ -202,7 +202,6 @@ static void check_from_zero(refcount_t *ref)/* * A refcount_inc() from zero should pin to zero or saturate and may WARN. -* Only CONFIG_REFCOUNT_FULL provides this protection currently. */ void lkdtm_REFCOUNT_INC_ZERO (void ) {
Signature · 1 line
2.24.0.432.g9d3f5f5b63-goog
[tip: locking/core] lkdtm: Remove references to CONFIG_REFCOUNT_FULL
The following commit has been merged into the locking/core branch of tip:
The following commit has been merged into the locking/core branch of tip:
Commit-ID: 500543c53a54134ced386aed85cd93cf1363f981 Gitweb: https://git.kernel.org/tip/500543c53a54134ced386aed85cd93cf1363f981 Author: Will Deacon <[email protected]> AuthorDate: Thu, 21 Nov 2019 11:59:02 Committer: Ingo Molnar <[email protected]> CommitterDate: Mon, 25 Nov 2019 09:15:46 +01:00
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
CONFIG_REFCOUNT_FULL no longer exists, so remove all references to it.
--- drivers/misc/lkdtm/refcount.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/misc/lkdtm/refcount.c +1 -2
@@ -119,7 +119,7 @@ void lkdtm_REFCOUNT_DEC_ZERO(void)static void check_negative (refcount_t *ref,int start) {/* -* CONFIG_REFCOUNT_FULL refuses to move a refcount at all on an +* refcount_t refuses to move a refcount at all on an * over-sub, so we have to track our starting position instead of * looking only at zero-pinning. */
@@ -202,7 +202,6 @@ static void check_from_zero(refcount_t *ref)/* * A refcount_inc() from zero should pin to zero or saturate and may WARN. -* Only CONFIG_REFCOUNT_FULL provides this protection currently. */ void lkdtm_REFCOUNT_INC_ZERO (void ) {
Quoted 7 lines · Will Deacon
Hi everybody,
This is a resend of version four of the patches I posted here:
Quoted 9 lines
Previous versions can be found at:
v1: https://lkml.kernel.org/r/[email protected]
v2: https://lkml.kernel.org/r/[email protected]
v3: https://lkml.kernel.org/r/[email protected]I didn't receive any feedback last time around, other than some positive noises from Kees, so please consider this for inclusion in mainline.
For the series,
Quoted 41 lines
Cc Kees Cook <[email protected]>Cc Ingo Molnar <[email protected]>Cc Elena Reshetova <[email protected]>Cc Peter Zijlstra <[email protected]>Cc Ard Biesheuvel <[email protected]>Cc Hanjun Guo <[email protected]>--->8
Will Deacon (10):
lib/refcount: Define constants for saturation and max refcount values lib/refcount: Ensure integer operands are treated as signed lib/refcount: Remove unused refcount_*_checked() variants lib/refcount: Move bulk ofREFCOUNT_FULLimplementation into header lib/refcount: Improve performance of genericREFCOUNT_FULLcode lib/refcount: Move saturation warnings out of line lib/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
refcount: Consolidate implementations ofrefcount_tlib/refcount: Remove unused 'refcount_error_report()' functiondrivers/lkdtm: Remove references toCONFIG_REFCOUNT_FULLarch/Kconfig | 21 --- arch/arm/Kconfig | 1 - arch/arm64/Kconfig | 1 - arch/s390/configs/debug_defconfig | 1 - arch/x86/Kconfig | 1 - arch/x86/include/asm/asm.h | 6 - arch/x86/include/asm/refcount.h | 126 -------------- arch/x86/mm/extable.c | 49 ------ drivers/gpu/drm/i915/Kconfig.debug | 1 - drivers/misc/lkdtm/refcount.c | 11 +- include/linux/kernel.h | 7 - include/linux/refcount.h | 269 ++++++++++++++++++++++++----- kernel/panic.c | 11 -- lib/refcount.c | 255 +++------------------------ 14 files changed, 257 insertions(+), 503 deletions(-) delete mode 100644 arch/x86/include/asm/refcount.h--
2.24.0.432.g9d3f5f5b63-goog
Quoted 6 lines · Will Deacon
Hi everybody,
This is a resend of version four of the patches I posted here:
Quoted 8 lines
Previous versions can be found at:
v1: https://lkml.kernel.org/r/[email protected]
v2: https://lkml.kernel.org/r/[email protected]
v3: https://lkml.kernel.org/r/[email protected]I didn't receive any feedback last time around, other than some positive noises from Kees, so please consider this for inclusion in mainline.
This time I tested this patch set on both ARM64 and x86 server, against 5.4-rc8.
On ARM64, similar test case and the similar performance improvement.
On X86, I tested on a 24 cores Xeon(R) CPU E5-2620, with kernel compile (make -j) for test case, and no issue was found.
Thanks
Hanjun