Skip to contentSkip to conversation

arm64: dts: rockchip: Add Rock Pi N10 support

PATCH Superseded Jagan Teki 3 participants 8 messages Nov 21, 2019 – Dec 4, 2019

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

v2 cover arm64: dts: rockchip: Add Rock Pi N10 support

Unlike, other Rock PI boards from radxa, Rock Pi N10 SBC is based on SOM + Carrier board combination.

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Dalang carrier board from Radxa.

This series add initial support for Rock Pi N10 and fixes comments from Heiko from v1[1].

patch 0001: dt-bindings for VMARC RK3399Pro SOM

patch 0002: VMARC RK3399Pro SOM dtsi support

patch 0003: dt-bindings for Rock Pi N10

patch 0004: Radxa Dalang carrier board dtsi support

patch 0005: Rock Pi N10 dts support

Tested basic peripherals and will all more in future patches.

[1] https://patchwork.kernel.org/cover/11253649/

Any inputs?
Jagan.

Jagan Teki (5):
dt-bindings: arm: rockchip: Add VMARC RK3399Pro SOM binding
arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support
dt-bindings: arm: rockchip: Add Rock Pi N10 binding
ARM: dts: rockchip: Add Radxa Dalang Carrier board
arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support

 .../devicetree/bindings/arm/rockchip.yaml     |  10 +
 .../dts/rockchip-radxa-dalang-carrier.dtsi    |  81 +++++
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3399pro-rock-pi-n10.dts    |  17 +
 .../dts/rockchip/rk3399pro-vmarc-som.dtsi     | 333 ++++++++++++++++++
 5 files changed, 442 insertions(+)
 create mode 100644 arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
Signature · 1 line
2.18.0.321.gffc6fa0e3
author
#1 lore raw

PATCH v2 1/5 dt-bindings: arm: rockchip: Add VMARC RK3399Pro SOM binding

VMARC RK3399Pro SOM is a standard SMARC SOM design with Rockchip RK3399Pro SoC, which is designed by Vamrs.

Since it is a standard SMARC design, it can be easily mounted on the supporting Carrier board. Radxa has suitable carrier board to mount and use it as a final version board.

Add dt-bindings for it.

---
Changes for v2:
- none

 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +5 -0
index 45728fd22af8..51aa458833a9 100644
@@ -526,4 +526,9 @@ properties:
         items:
           - const: tronsmart,orion-r68-meta
           - const: rockchip,rk3368
+
+      - description: Vamrs VMARC RK3399Pro SOM
+        items:
+          - const: vamrs,rk3399pro-vmarc-som
+          - const: rockchip,rk3399pro
 ...
Signature · 1 line
2.18.0.321.gffc6fa0e3
maintainer
#2 lore raw

Re: [PATCH v2 1/5] dt-bindings: arm: rockchip: Add VMARC RK3399Pro SOM binding

Quoted 23 lines · Jagan Teki

VMARC RK3399Pro SOM is a standard SMARC SOM design with Rockchip RK3399Pro SoC, which is designed by Vamrs.

Since it is a standard SMARC design, it can be easily mounted on the supporting Carrier board. Radxa has suitable carrier board to mount and use it as a final version board.

Add dt-bindings for it.

---
Changes for v2:
- none

 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +0 -0
index 45728fd22af8..51aa458833a9 100644

Documentation/devicetree/bindings/arm/rockchip.yaml properties: · line 532

Quoted 7 lines
Documentation/devicetree/bindings/arm/rockchip.yaml +4 -0
@@ -526,4 +526,9 @@ properties:
         items:
           - const: tronsmart,orion-r68-meta
           - const: rockchip,rk3368
+
+      - description: Vamrs VMARC RK3399Pro SOM
+        items:
+          - const: vamrs,rk3399pro-vmarc-som

Why do you need this? You just override it in your dts files, so it is not really used. Perhaps the top-level should have all 3 compatibles? If so, then the schemas are wrong.

Quoted 5 lines
Documentation/devicetree/bindings/arm/rockchip.yaml +1 -0
+          - const: rockchip,rk3399pro
...
Signature · 1 line
2.18.0.321.gffc6fa0e3
maintainer
#3 lore raw

Re: [PATCH v2 1/5] dt-bindings: arm: rockchip: Add VMARC RK3399Pro SOM binding

Am Mittwoch, 4. Dezember 2019, 20:32:40 CET schrieb Rob Herring:

Quoted 19 lines · Jagan Teki
Quoted 18 lines

VMARC RK3399Pro SOM is a standard SMARC SOM design with Rockchip RK3399Pro SoC, which is designed by Vamrs.

Since it is a standard SMARC design, it can be easily mounted on the supporting Carrier board. Radxa has suitable carrier board to mount and use it as a final version board.

Add dt-bindings for it.

---
Changes for v2:
- none

 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)
Quoted 16 lines

Documentation/devicetree/bindings/arm/rockchip.yaml properties: · line 532

Quoted 12 lines
Documentation/devicetree/bindings/arm/rockchip.yaml +4 -0
index 45728fd22af8..51aa458833a9 100644
@@ -526,4 +526,9 @@ properties:
         items:
           - const: tronsmart,orion-r68-meta
           - const: rockchip,rk3368
+
+      - description: Vamrs VMARC RK3399Pro SOM
+        items:
+          - const: vamrs,rk3399pro-vmarc-som

Why do you need this? You just override it in your dts files, so it is not really used. Perhaps the top-level should have all 3 compatibles? If so, then the schemas are wrong.

In the past we had SOMs that _could_ function alone, but looking at the announcement for this one [0] suggests that the SOM always needs a carrier board, so I don't think the SOM actually needs a separate entry but instead should be part of the carrier-board compatible list, as Rob suggested.

So I guess we should only have (from patch 3):
- description: Radxa ROCK Pi N10
items:
- const: radxa,rockpi-n10
- const: vamrs,rk3399pro-vmarc-som
- const: rockchip,rk3399pro

Heiko

[0] https://www.96rocks.com/blog/2019/09/11/introduce-vamrc-rk3399pro-som-and-ficus2-carrier-board/

author
#4 lore raw

PATCH v2 2/5 arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support

In reply to Jagan Teki

VMARC RK3399Pro SOM is a standard SMARC SOM design with Rockchip RK3399Pro SoC, which is designed by Vamrs.

Specification:
- Rockchip RK3399Pro
- PMIC: RK809-3
- SD slot, 16GiB eMMC
- 2xUSB-2.0, 1xUSB3.0
- USB-C for power supply
- Ethernet, PCIe
- HDMI, MIPI-DSI/CSI, eDP

Add initial support for VMARC RK3399Pro SOM, this would use with associated carrier board.

---
Changes for v2:
- add vin-supply for vcc5v0_sys
- use vcc_lan from regulator tree
- drop comments from tsadc node

 .../dts/rockchip/rk3399pro-vmarc-som.dtsi     | 333 ++++++++++++++++++
 1 file changed, 333 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi new file +333 -0
new file mode 100644
index 000000000000..0a516334f15f
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vccio_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+};
Signature · 1 line
2.18.0.321.gffc6fa0e3
author
#5 lore raw

PATCH v2 3/5 dt-bindings: arm: rockchip: Add Rock Pi N10 binding

In reply to Jagan Teki

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Compatible carrier board from Radxa.

VMARC RK3399Pro SOM need to mount on top of dalang carrier board for making Rock PI N10 SBC.

Add dt-bindings for it.

---
Changes for v2:
- none

 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +5 -0
index 51aa458833a9..afa6b2e5aeed 100644
@@ -423,6 +423,11 @@ properties:
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK Pi N10
+        items:
+          - const: radxa,rockpi-n10
+          - const: rockchip,rk3399pro
+
       - description: Radxa Rock2 Square
         items:
           - const: radxa,rock2-square
Signature · 1 line
2.18.0.321.gffc6fa0e3
author
#6 lore raw

PATCH v2 4/5 ARM: dts: rockchip: Add Radxa Dalang Carrier board

In reply to Jagan Teki

Carrier board often referred as baseboard. For making complete SBC or any other industrial boards, these carrier boards will used with associated SOMs.

Radxa has Dalang carrier board which supports on board peripherals, ports like USB-2.0, USB-3.0, HDMI, MIPI DSI/CSI, eDP, Ethernet, WiFi, PCIe, USB-C, 40-Pin GPIO header and etc.

Right now Dalang carrier board is using with two variants SBC, like
Rock Pi N10 => VMARC RK3399Por SOM + Dalang carrier board Rock Pi N8 => VMARC RK3288 SOM + Dalang carrier board(+codec)

So add this carrier board dtsi as a separate file in ARM directory, so-that the same can reuse it in both rk3288, rk3399pro variants of Rockchip SOMs.

---
Changes for v2:
- use dalang carrier board as product name
- s/rockchip-radxa-carrierboard.dtsi/rockchip-radxa-dalang-carrier.dtsi

 .../dts/rockchip-radxa-dalang-carrier.dtsi    | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi new file +81 -0
new file mode 100644
index 000000000000..df3712aedf8a
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <140>;
+	i2c-scl-falling-time-ns = <30>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+};
Signature · 1 line
2.18.0.321.gffc6fa0e3
author
#7 lore raw

PATCH v2 5/5 arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support

In reply to Jagan Teki

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Compatible carrier board from Radxa.

VAMRC RK3399Pro SOM need to mount on top of radxa dalang carrier board for making Rock Pi N10 SBC.

So, add initial support for Rock Pi N10 by including rk3399, rk3399pro vamrc-som and raxda dalang carrier board dtsi files.

---
Changes for v2:
- s/rockchip-radxa-carrierboard.dtsi/rockchip-radxa-dalang-carrier.dtsi

 arch/arm64/boot/dts/rockchip/Makefile           |  1 +
 .../boot/dts/rockchip/rk3399pro-rock-pi-n10.dts | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
index 48fb631d5451..433033b18170 100644
@@ -36,3 +36,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts new file +17 -0
new file mode 100644
index 000000000000..b42f94179538
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include "rk3399pro-vmarc-som.dtsi"
+#include <arm/rockchip-radxa-dalang-carrier.dtsi>
+
+/ {
+	model = "Radxa ROCK Pi N10";
+	compatible = "radxa,rockpi-n10", "rockchip,rk3399pro";
+};
Signature · 1 line
2.18.0.321.gffc6fa0e3