ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx
Subsystems (2)
PATCH 1/1 ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx
From: Damir Franusic <[email protected]>
Add missing nodes and properties to enable SMP
support on IPQ40xx devices.
Booting without "saw_l2" node:
[ 0.001400] CPU: Testing write buffer coherency: ok [ 0.001856] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.060163] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.080140] rcu: Hierarchical SRCU implementation. [ 0.120258] smp: Bringing up secondary CPUs ... [ 0.200540] CPU1: failed to boot: -19 [ 0.280689] CPU2: failed to boot: -19 [ 0.360874] CPU3: failed to boot: -19 [ 0.360966] smp: Brought up 1 node, 1 CPU [ 0.360979] SMP: Total of 1 processors activated (96.00 BogoMIPS). [ 0.360988] CPU: All CPU(s) started in SVC mode.
Then, booting with "saw_l2" node present (this patch applied):
[ 0.001450] CPU: Testing write buffer coherency: ok [ 0.001904] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.060161] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.080137] rcu: Hierarchical SRCU implementation. [ 0.120252] smp: Bringing up secondary CPUs ... [ 0.200958] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.281091] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.361264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.361430] smp: Brought up 1 node, 4 CPUs [ 0.361460] SMP: Total of 4 processors activated (384.00 BogoMIPS). [ 0.361469] CPU: All CPU(s) started in SVC mode.
Signed-off-by Damir Franusic <[email protected]>
Cc Luka Perkov <[email protected]>
Cc Robert Marko <[email protected]>
Cc Andy Gross <[email protected]>
Cc Rob Herring <[email protected]>
--- arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/boot/dts/qcom-ipq4019.dtsi +7 -0
@@ -102,6 +102,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + qcom,saw = <&saw_l2>; }; };
@@ -341,6 +342,12 @@ regulator; }; + saw_l2: regulator@b012000 { + compatible = "qcom,saw2"; + reg = <0xb012000 0x1000>; + regulator; + }; + blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78af000 0x200>;
Signature · 1 line
2.23.0