Skip to contentSkip to conversation

ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data

PATCH In review Geoffrey D. Bennett 3 participants 7 messages Nov 11, 2019 – Dec 2, 2019 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data

The s6i6_gen2_info.ports[] array had the Mixer and PCM port type entries in the wrong place. Use designators to explicitly specify the array elements being set.

Fixes 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")

---
Hi Takashi,

Is there something special I need to do to mark this as a bug fix and request this go into 5.4?

Thanks,
Geoffrey.

 sound/usb/mixer_scarlett_gen2.c | 36 ++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 18 deletions(-)
sound/usb/mixer_scarlett_gen2.c +18 -18
index 7d460b1f1735..94b903d95afa 100644
@@ -261,34 +261,34 @@ static const struct scarlett2_device_info s6i6_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 8 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 4, 4, 4, 4, 4 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
 			.id = 0x180,
 			.num = { 2, 2, 2, 2, 2 },
 			.src_descr = "S/PDIF %d",
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 6, 6, 6, 6, 6 },
 			.src_descr = "PCM %d",
@@ -317,44 +317,44 @@ static const struct scarlett2_device_info s18i8_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 4 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 8, 6, 6, 6, 6 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
+			.id = 0x180,
 			/* S/PDIF outputs aren't available at 192KHz
 			 * but are included in the USB mux I/O
 			 * assignment message anyway
 			 */
-			.id = 0x180,
 			.num = { 2, 2, 2, 2, 2 },
 			.src_descr = "S/PDIF %d",
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ADAT] = {
 			.id = 0x200,
 			.num = { 8, 0, 0, 0, 0 },
 			.src_descr = "ADAT %d",
 			.src_num_offset = 1,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 20, 18, 18, 14, 10 },
 			.src_descr = "PCM %d",
@@ -387,20 +387,20 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 6 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 8, 10, 10, 10, 10 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
 			/* S/PDIF outputs aren't available at 192KHz
 			 * but are included in the USB mux I/O
 			 * assignment message anyway
@@ -411,21 +411,21 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ADAT] = {
 			.id = 0x200,
 			.num = { 8, 8, 8, 4, 0 },
 			.src_descr = "ADAT %d",
 			.src_num_offset = 1,
 			.dst_descr = "ADAT Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 20, 18, 18, 14, 10 },
 			.src_descr = "PCM %d",
Signature · 6 lines
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Tested-by on v1 1/1
#1 lore raw
Quoted 8 lines

The s6i6_gen2_info.ports[] array had the Mixer and PCM port type entries in the wrong place. Use designators to explicitly specify the array elements being set.

Fixes 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by Geoffrey D. Bennett <g at b4.vu <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Reported-by Jonas Berlin <kernel at xkr47.space <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Tested-by Alex Fellows <alex.fellows at gmail.com <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Quoted 159 lines

---
Hi Takashi,

Is there something special I need to do to mark this as a bug fix and request this go into 5.4?

Thanks,
Geoffrey.

 sound/usb/mixer_scarlett_gen2.c | 36 ++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 18 deletions(-)
sound/usb/mixer_scarlett_gen2.c +18 -18
index 7d460b1f1735..94b903d95afa 100644
@@ -261,34 +261,34 @@ static const struct scarlett2_device_info s6i6_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 8 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 4, 4, 4, 4, 4 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
 			.id = 0x180,
 			.num = { 2, 2, 2, 2, 2 },
 			.src_descr = "S/PDIF %d",
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 6, 6, 6, 6, 6 },
 			.src_descr = "PCM %d",
@@ -317,44 +317,44 @@ static const struct scarlett2_device_info s18i8_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 4 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 8, 6, 6, 6, 6 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
+			.id = 0x180,
 			/* S/PDIF outputs aren't available at 192KHz
 			 * but are included in the USB mux I/O
 			 * assignment message anyway
 			 */
-			.id = 0x180,
 			.num = { 2, 2, 2, 2, 2 },
 			.src_descr = "S/PDIF %d",
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ADAT] = {
 			.id = 0x200,
 			.num = { 8, 0, 0, 0, 0 },
 			.src_descr = "ADAT %d",
 			.src_num_offset = 1,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 20, 18, 18, 14, 10 },
 			.src_descr = "PCM %d",
@@ -387,20 +387,20 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 6 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 8, 10, 10, 10, 10 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
 			/* S/PDIF outputs aren't available at 192KHz
 			 * but are included in the USB mux I/O
 			 * assignment message anyway
@@ -411,21 +411,21 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ADAT] = {
 			.id = 0x200,
 			.num = { 8, 8, 8, 4, 0 },
 			.src_descr = "ADAT %d",
 			.src_num_offset = 1,
 			.dst_descr = "ADAT Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 20, 18, 18, 14, 10 },
 			.src_descr = "PCM %d",
Signature · 1 line
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#2 lore raw
Quoted 10 lines · Markus Schroetter
Quoted 9 lines

The s6i6_gen2_info.ports[] array had the Mixer and PCM port type entries in the wrong place. Use designators to explicitly specify the array elements being set.

Fixes 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by Geoffrey D. Bennett <g at b4.vu <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Reported-by Jonas Berlin <kernel at xkr47.space <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Tested-by Alex Fellows <alex.fellows at gmail.com <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>

Oh this wasn't taken yet. Now merged for 5.5.

thanks,

Takashi

Quoted 156 lines
Quoted 156 lines

---
Hi Takashi,

Is there something special I need to do to mark this as a bug fix and request this go into 5.4?

Thanks,
Geoffrey.

 sound/usb/mixer_scarlett_gen2.c | 36 ++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 18 deletions(-)
sound/usb/mixer_scarlett_gen2.c +18 -18
index 7d460b1f1735..94b903d95afa 100644
@@ -261,34 +261,34 @@ static const struct scarlett2_device_info s6i6_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 8 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 4, 4, 4, 4, 4 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
 			.id = 0x180,
 			.num = { 2, 2, 2, 2, 2 },
 			.src_descr = "S/PDIF %d",
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 6, 6, 6, 6, 6 },
 			.src_descr = "PCM %d",
@@ -317,44 +317,44 @@ static const struct scarlett2_device_info s18i8_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 4 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 8, 6, 6, 6, 6 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
+			.id = 0x180,
 			/* S/PDIF outputs aren't available at 192KHz
 			 * but are included in the USB mux I/O
 			 * assignment message anyway
 			 */
-			.id = 0x180,
 			.num = { 2, 2, 2, 2, 2 },
 			.src_descr = "S/PDIF %d",
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ADAT] = {
 			.id = 0x200,
 			.num = { 8, 0, 0, 0, 0 },
 			.src_descr = "ADAT %d",
 			.src_num_offset = 1,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 20, 18, 18, 14, 10 },
 			.src_descr = "PCM %d",
@@ -387,20 +387,20 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 6 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 8, 10, 10, 10, 10 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
 			/* S/PDIF outputs aren't available at 192KHz
 			 * but are included in the USB mux I/O
 			 * assignment message anyway
@@ -411,21 +411,21 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ADAT] = {
 			.id = 0x200,
 			.num = { 8, 8, 8, 4, 0 },
 			.src_descr = "ADAT %d",
 			.src_num_offset = 1,
 			.dst_descr = "ADAT Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 20, 18, 18, 14, 10 },
Quoted 9 lines
Quoted 3 lines
sound/usb/mixer_scarlett_gen2.c +0 -0
 			.src_descr = "PCM %d",
Signature · 1 line
2.20.1

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#3 lore raw
Quoted 7 lines · Takashi Iwai
Quoted 5 lines · Markus Schroetter
Quoted 5 lines

The s6i6_gen2_info.ports[] array had the Mixer and PCM port type entries in the wrong place. Use designators to explicitly specify the array elements being set.

Quoted 7 lines
Quoted 5 lines
Quoted 4 lines
Fixes 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by Geoffrey D. Bennett <g at b4.vu <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Reported-by Jonas Berlin <kernel at xkr47.space <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Tested-by Alex Fellows <alex.fellows at gmail.com <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>

Oh this wasn't taken yet. Now merged for 5.5.

Thanks for that! Is it possible to get it included in 5.4.1 as well? Without this patch, the 6i6 support is unusable.

Thanks,
Geoffrey.
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#4 lore raw
Quoted 13 lines · Geoffrey D. Bennett
Quoted 11 lines · Takashi Iwai
Quoted 9 lines · Markus Schroetter
Quoted 9 lines

The s6i6_gen2_info.ports[] array had the Mixer and PCM port type entries in the wrong place. Use designators to explicitly specify the array elements being set.

Fixes 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by Geoffrey D. Bennett <g at b4.vu <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Reported-by Jonas Berlin <kernel at xkr47.space <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Tested-by Alex Fellows <alex.fellows at gmail.com <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Quoted 5 lines
Quoted 3 lines
Quoted 1 line

Oh this wasn't taken yet. Now merged for 5.5.

Thanks for that! Is it possible to get it included in 5.4.1 as well?

Yes, once when merged to Linus tree, it'll be picked up.

Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#5 lore raw
In reply to Takashi Iwai

Hi Takashi,

Quoted 7 lines · Takashi Iwai
Quoted 5 lines · Markus Schroetter
Quoted 5 lines

The s6i6_gen2_info.ports[] array had the Mixer and PCM port type entries in the wrong place. Use designators to explicitly specify the array elements being set.

Quoted 7 lines
Quoted 5 lines
Quoted 4 lines
Fixes 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by Geoffrey D. Bennett <g at b4.vu <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Reported-by Jonas Berlin <kernel at xkr47.space <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Tested-by Alex Fellows <alex.fellows at gmail.com <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>

Oh this wasn't taken yet. Now merged for 5.5.

Thanks, I see it appeared in 5.4.1. Is it too late to get the commit message fixed for 5.5? It's missing the Reported-by line above:

Thanks,
Geoffrey.
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#6 lore raw
Quoted 15 lines · Geoffrey D. Bennett

Hi Takashi,

Quoted 11 lines · Takashi Iwai
Quoted 9 lines · Markus Schroetter
Quoted 9 lines

The s6i6_gen2_info.ports[] array had the Mixer and PCM port type entries in the wrong place. Use designators to explicitly specify the array elements being set.

Fixes 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by Geoffrey D. Bennett <g at b4.vu <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Reported-by Jonas Berlin <kernel at xkr47.space <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Tested-by Alex Fellows <alex.fellows at gmail.com <https://mailman.alsa-project.org/mailman/listinfo/alsa-devel>>
Quoted 6 lines
Quoted 3 lines
Quoted 1 line

Oh this wasn't taken yet. Now merged for 5.5.

Thanks, I see it appeared in 5.4.1. Is it too late to get the commit message fixed for 5.5?

Yes, you can't change the commit log any longer.

Quoted 3 lines

It's missing the Reported-by line above:

... but people can refer to the ML archive from the link in the commit log, so it's still worth to mention here.

thanks,

Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel