Skip to contentSkip to conversation

watchdog: sama5d4_wdt: cleanup the bit definitions

PATCH In review [email protected] 2 participants 4 messages Nov 18, 2019 – Nov 22, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v5 1/3 watchdog: sama5d4_wdt: cleanup the bit definitions

From: Eugen Hristev <[email protected]>

Cleanup the macro definitions to use BIT and align with two spaces.

---
Changes in v4:
- added UL suffix to value macros to avoid compile warnings
- modified file header to include new copyright and datasheet
- include linux/bits.h

Changes in v3:
- new patch as requested from review on ML

 drivers/watchdog/at91sam9_wdt.h | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)
drivers/watchdog/at91sam9_wdt.h +19 -15
index 390941c..abfe34d 100644
@@ -4,33 +4,37 @@
  *
  * Copyright (C) 2007 Andrew Victor
  * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
  *
  * Watchdog Timer (WDT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
+ * Based on SAM9X60 datasheet.
  *
  */
 
 #ifndef AT91_WDT_H
 #define AT91_WDT_H
 
+#include <linux/bits.h>
+
 #define AT91_WDT_CR		0x00			/* Watchdog Control Register */
-#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
-#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
+#define  AT91_WDT_WDRSTT	BIT(0)			/* Restart */
+#define  AT91_WDT_KEY		(0xa5UL << 24)		/* KEY Password */
 
 #define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
-#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
-#define			AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
-#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
-#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
-#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
-#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
-#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
-#define			AT91_WDT_SET_WDD(x)	(((x) << 16) & AT91_WDT_WDD)
-#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
-#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
+#define  AT91_WDT_WDV		(0xfffUL << 0)		/* Counter Value */
+#define  AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
+#define  AT91_WDT_WDFIEN	BIT(12)		/* Fault Interrupt Enable */
+#define  AT91_WDT_WDRSTEN	BIT(13)		/* Reset Processor */
+#define  AT91_WDT_WDRPROC	BIT(14)		/* Timer Restart */
+#define  AT91_WDT_WDDIS		BIT(15)		/* Watchdog Disable */
+#define  AT91_WDT_WDD		(0xfffUL << 16)		/* Delta Value */
+#define  AT91_WDT_SET_WDD(x)	(((x) << 16) & AT91_WDT_WDD)
+#define  AT91_WDT_WDDBGHLT	BIT(28)		/* Debug Halt */
+#define  AT91_WDT_WDIDLEHLT	BIT(29)		/* Idle Halt */
 
-#define AT91_WDT_SR		0x08			/* Watchdog Status Register */
-#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
-#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
+#define AT91_WDT_SR		0x08		/* Watchdog Status Register */
+#define  AT91_WDT_WDUNF		BIT(0)		/* Watchdog Underflow */
+#define  AT91_WDT_WDERR		BIT(1)		/* Watchdog Error */
 
 #endif
Signature · 1 line
2.7.4
#1 lore raw

PATCH v5 2/3 dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible

From: Eugen Hristev <[email protected]>

The Atmel sama5d4_wdt needs to be compatible with microchip,sam9x60-wdt The sama5d4_wdt driver is updated to work with both hardware blocks (sama5d4/sama5d2 and sam9x60 based blocks)

---
 Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt +1 -1
index 4fec1e3..44727fc 100644
@@ -1,7 +1,7 @@
 * Atmel SAMA5D4 Watchdog Timer (WDT) Controller
 
 Required properties:
-- compatible: "atmel,sama5d4-wdt"
+- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt"
 - reg: base physical address and length of memory mapped region.
 
 Optional properties:
Signature · 1 line
2.7.4
#2 lore raw

PATCH v5 3/3 watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog

In reply to [email protected]

From: Eugen Hristev <[email protected]>

Add support for SAM9X60 WDT into sama5d4_wdt.
This means that this driver gets a flag inside the data struct that represents the sam9x60 support.
This flag differentiates between the two hardware blocks, and is set according to the compatible of the driver instantiation.

---
Changes in v5:
- Fixed checkpatch issues for excessive long lines in header file

Changes in v4:
- check compatible with different of_ function
- call irq parse and map only if need_irq
- changed tabbing in struct defintion

Changes in v3:
- changed need_irq to bool, instead of a single bit variable.
- the platform data config struct is gone now, changed to a pointer to a bool to have the sam9x60_support as 'true', pointing to a static bool with true value. Can have a better solution than this ?
- the specific sam9x60_support flag is assigned at probe time, corresponding to the flag value in .data

 drivers/watchdog/at91sam9_wdt.h |  21 ++++++++
 drivers/watchdog/sama5d4_wdt.c  | 109 +++++++++++++++++++++++++++++++---------
 2 files changed, 105 insertions(+), 25 deletions(-)
drivers/watchdog/at91sam9_wdt.h +21 -0
index abfe34d..298d545 100644
@@ -24,7 +24,10 @@
 #define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
 #define  AT91_WDT_WDV		(0xfffUL << 0)		/* Counter Value */
 #define  AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
+#define  AT91_SAM9X60_PERIODRST	BIT(4)		/* Period Reset */
+#define  AT91_SAM9X60_RPTHRST	BIT(5)		/* Minimum Restart Period */
 #define  AT91_WDT_WDFIEN	BIT(12)		/* Fault Interrupt Enable */
+#define  AT91_SAM9X60_WDDIS	BIT(12)		/* Watchdog Disable */
 #define  AT91_WDT_WDRSTEN	BIT(13)		/* Reset Processor */
 #define  AT91_WDT_WDRPROC	BIT(14)		/* Timer Restart */
 #define  AT91_WDT_WDDIS		BIT(15)		/* Watchdog Disable */
@@ -37,4 +40,22 @@
 #define  AT91_WDT_WDUNF		BIT(0)		/* Watchdog Underflow */
 #define  AT91_WDT_WDERR		BIT(1)		/* Watchdog Error */
 
+/* Watchdog Timer Value Register */
+#define AT91_SAM9X60_VR		0x08
+
+/* Watchdog Window Level Register */
+#define AT91_SAM9X60_WLR	0x0c
+/* Watchdog Period Value */
+#define  AT91_SAM9X60_COUNTER	(0xfffUL << 0)
+#define  AT91_SAM9X60_SET_COUNTER(x)	((x) & AT91_SAM9X60_COUNTER)
+
+/* Interrupt Enable Register */
+#define AT91_SAM9X60_IER	0x14
+/* Period Interrupt Enable */
+#define  AT91_SAM9X60_PERINT	BIT(0)
+/* Interrupt Disable Register */
+#define AT91_SAM9X60_IDR	0x18
+/* Interrupt Status Register */
+#define AT91_SAM9X60_ISR	0x1c
+
 #endif
drivers/watchdog/sama5d4_wdt.c +84 -25

212 lines not on this page · raw message

Signature · 1 line
2.7.4
maintainer Reviewed-by on v5 3/3
#3 lore raw

Re: [PATCH v5 3/3] watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog

Quoted 9 lines · On Mon, Nov 18, 2019 at 08:50:36AM +0000, [email protected] wrote:

From: Eugen Hristev <[email protected]>

Add support for SAM9X60 WDT into sama5d4_wdt.
This means that this driver gets a flag inside the data struct that represents the sam9x60 support.
This flag differentiates between the two hardware blocks, and is set according to the compatible of the driver instantiation.

Quoted 289 lines

---
Changes in v5:
- Fixed checkpatch issues for excessive long lines in header file

Changes in v4:
- check compatible with different of_ function
- call irq parse and map only if need_irq
- changed tabbing in struct defintion

Changes in v3:
- changed need_irq to bool, instead of a single bit variable.
- the platform data config struct is gone now, changed to a pointer to a bool to have the sam9x60_support as 'true', pointing to a static bool with true value. Can have a better solution than this ?
- the specific sam9x60_support flag is assigned at probe time, corresponding to the flag value in .data

 drivers/watchdog/at91sam9_wdt.h |  21 ++++++++
 drivers/watchdog/sama5d4_wdt.c  | 109 +++++++++++++++++++++++++++++++---------
 2 files changed, 105 insertions(+), 25 deletions(-)
drivers/watchdog/at91sam9_wdt.h +21 -0
index abfe34d..298d545 100644
@@ -24,7 +24,10 @@
 #define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
 #define  AT91_WDT_WDV		(0xfffUL << 0)		/* Counter Value */
 #define  AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
+#define  AT91_SAM9X60_PERIODRST	BIT(4)		/* Period Reset */
+#define  AT91_SAM9X60_RPTHRST	BIT(5)		/* Minimum Restart Period */
 #define  AT91_WDT_WDFIEN	BIT(12)		/* Fault Interrupt Enable */
+#define  AT91_SAM9X60_WDDIS	BIT(12)		/* Watchdog Disable */
 #define  AT91_WDT_WDRSTEN	BIT(13)		/* Reset Processor */
 #define  AT91_WDT_WDRPROC	BIT(14)		/* Timer Restart */
 #define  AT91_WDT_WDDIS		BIT(15)		/* Watchdog Disable */
@@ -37,4 +40,22 @@
 #define  AT91_WDT_WDUNF		BIT(0)		/* Watchdog Underflow */
 #define  AT91_WDT_WDERR		BIT(1)		/* Watchdog Error */
 
+/* Watchdog Timer Value Register */
+#define AT91_SAM9X60_VR		0x08
+
+/* Watchdog Window Level Register */
+#define AT91_SAM9X60_WLR	0x0c
+/* Watchdog Period Value */
+#define  AT91_SAM9X60_COUNTER	(0xfffUL << 0)
+#define  AT91_SAM9X60_SET_COUNTER(x)	((x) & AT91_SAM9X60_COUNTER)
+
+/* Interrupt Enable Register */
+#define AT91_SAM9X60_IER	0x14
+/* Period Interrupt Enable */
+#define  AT91_SAM9X60_PERINT	BIT(0)
+/* Interrupt Disable Register */
+#define AT91_SAM9X60_IDR	0x18
+/* Interrupt Status Register */
+#define AT91_SAM9X60_ISR	0x1c
+
 #endif
drivers/watchdog/sama5d4_wdt.c +84 -25
index d193a60..e5d11d6 100644
@@ -2,7 +2,7 @@
 /*
  * Driver for Atmel SAMA5D4 Watchdog Timer
  *
- * Copyright (C) 2015 Atmel Corporation
+ * Copyright (C) 2015-2019 Microchip Technology Inc. and its subsidiaries
  */
 
 #include <linux/delay.h>
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
@@ -29,7 +30,10 @@ struct sama5d4_wdt {
 	struct watchdog_device	wdd;
 	void __iomem		*reg_base;
 	u32			mr;
+	u32			ir;
 	unsigned long		last_ping;
+	bool			need_irq;
+	bool			sam9x60_support;
 };
 
 static int wdt_timeout;
@@ -78,7 +82,12 @@ static int sama5d4_wdt_start(struct watchdog_device *wdd)
 {
 	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
 
-	wdt->mr &= ~AT91_WDT_WDDIS;
+	if (wdt->sam9x60_support) {
+		writel_relaxed(wdt->ir, wdt->reg_base + AT91_SAM9X60_IER);
+		wdt->mr &= ~AT91_SAM9X60_WDDIS;
+	} else {
+		wdt->mr &= ~AT91_WDT_WDDIS;
+	}
 	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
 
 	return 0;
@@ -88,7 +97,12 @@ static int sama5d4_wdt_stop(struct watchdog_device *wdd)
 {
 	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
 
-	wdt->mr |= AT91_WDT_WDDIS;
+	if (wdt->sam9x60_support) {
+		writel_relaxed(wdt->ir, wdt->reg_base + AT91_SAM9X60_IDR);
+		wdt->mr |= AT91_SAM9X60_WDDIS;
+	} else {
+		wdt->mr |= AT91_WDT_WDDIS;
+	}
 	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
 
 	return 0;
@@ -109,6 +123,14 @@ static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd,
 	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
 	u32 value = WDT_SEC2TICKS(timeout);
 
+	if (wdt->sam9x60_support) {
+		wdt_write(wdt, AT91_SAM9X60_WLR,
+			  AT91_SAM9X60_SET_COUNTER(value));
+
+		wdd->timeout = timeout;
+		return 0;
+	}
+
 	wdt->mr &= ~AT91_WDT_WDV;
 	wdt->mr |= AT91_WDT_SET_WDV(value);
 
@@ -143,8 +165,14 @@ static const struct watchdog_ops sama5d4_wdt_ops = {
 static irqreturn_t sama5d4_wdt_irq_handler(int irq, void *dev_id)
 {
 	struct sama5d4_wdt *wdt = platform_get_drvdata(dev_id);
+	u32 reg;
 
-	if (wdt_read(wdt, AT91_WDT_SR)) {
+	if (wdt->sam9x60_support)
+		reg = wdt_read(wdt, AT91_SAM9X60_ISR);
+	else
+		reg = wdt_read(wdt, AT91_WDT_SR);
+
+	if (reg) {
 		pr_crit("Atmel Watchdog Software Reset\n");
 		emergency_restart();
 		pr_crit("Reboot didn't succeed\n");
@@ -157,13 +185,14 @@ static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
 {
 	const char *tmp;
 
-	wdt->mr = AT91_WDT_WDDIS;
+	if (wdt->sam9x60_support)
+		wdt->mr = AT91_SAM9X60_WDDIS;
+	else
+		wdt->mr = AT91_WDT_WDDIS;
 
 	if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) &&
 	    !strcmp(tmp, "software"))
-		wdt->mr |= AT91_WDT_WDFIEN;
-	else
-		wdt->mr |= AT91_WDT_WDRSTEN;
+		wdt->need_irq = true;
 
 	if (of_property_read_bool(np, "atmel,idle-halt"))
 		wdt->mr |= AT91_WDT_WDIDLEHLT;
@@ -176,21 +205,46 @@ static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
 
 static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)
 {
-	u32 reg;
+	u32 reg, val;
+
+	val = WDT_SEC2TICKS(WDT_DEFAULT_TIMEOUT);
 	/*
 	 * When booting and resuming, the bootloader may have changed the
 	 * watchdog configuration.
 	 * If the watchdog is already running, we can safely update it.
 	 * Else, we have to disable it properly.
 	 */
-	if (wdt_enabled) {
-		wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
-	} else {
+	if (!wdt_enabled) {
 		reg = wdt_read(wdt, AT91_WDT_MR);
-		if (!(reg & AT91_WDT_WDDIS))
+		if (wdt->sam9x60_support && (!(reg & AT91_SAM9X60_WDDIS)))
+			wdt_write_nosleep(wdt, AT91_WDT_MR,
+					  reg | AT91_SAM9X60_WDDIS);
+		else if (!wdt->sam9x60_support &&
+			 (!(reg & AT91_WDT_WDDIS)))
 			wdt_write_nosleep(wdt, AT91_WDT_MR,
 					  reg | AT91_WDT_WDDIS);
 	}
+
+	if (wdt->sam9x60_support) {
+		if (wdt->need_irq)
+			wdt->ir = AT91_SAM9X60_PERINT;
+		else
+			wdt->mr |= AT91_SAM9X60_PERIODRST;
+
+		wdt_write(wdt, AT91_SAM9X60_IER, wdt->ir);
+		wdt_write(wdt, AT91_SAM9X60_WLR, AT91_SAM9X60_SET_COUNTER(val));
+	} else {
+		wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT));
+		wdt->mr |= AT91_WDT_SET_WDV(val);
+
+		if (wdt->need_irq)
+			wdt->mr |= AT91_WDT_WDFIEN;
+		else
+			wdt->mr |= AT91_WDT_WDRSTEN;
+	}
+
+	wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
+
 	return 0;
 }
 
@@ -201,7 +255,6 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 	struct sama5d4_wdt *wdt;
 	void __iomem *regs;
 	u32 irq = 0;
-	u32 timeout;
 	int ret;
 
 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
@@ -215,6 +268,8 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 	wdd->min_timeout = MIN_WDT_TIMEOUT;
 	wdd->max_timeout = MAX_WDT_TIMEOUT;
 	wdt->last_ping = jiffies;
+	wdt->sam9x60_support = of_device_is_compatible(dev->of_node,
+						       "microchip,sam9x60-wdt");
 
 	watchdog_set_drvdata(wdd, wdt);
 
@@ -224,15 +279,19 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 
 	wdt->reg_base = regs;
 
-	irq = irq_of_parse_and_map(dev->of_node, 0);
-	if (!irq)
-		dev_warn(dev, "failed to get IRQ from DT\n");
-
 	ret = of_sama5d4_wdt_init(dev->of_node, wdt);
 	if (ret)
 		return ret;
 
-	if ((wdt->mr & AT91_WDT_WDFIEN) && irq) {
+	if (wdt->need_irq) {
+		irq = irq_of_parse_and_map(dev->of_node, 0);
+		if (!irq) {
+			dev_warn(dev, "failed to get IRQ from DT\n");
+			wdt->need_irq = false;
+		}
+	}
+
+	if (wdt->need_irq) {
 		ret = devm_request_irq(dev, irq, sama5d4_wdt_irq_handler,
 				       IRQF_SHARED | IRQF_IRQPOLL |
 				       IRQF_NO_SUSPEND, pdev->name, pdev);
@@ -244,11 +303,6 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 
 	watchdog_init_timeout(wdd, wdt_timeout, dev);
 
-	timeout = WDT_SEC2TICKS(wdd->timeout);
-
-	wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT));
-	wdt->mr |= AT91_WDT_SET_WDV(timeout);
-
 	ret = sama5d4_wdt_init(wdt);
 	if (ret)
 		return ret;
@@ -269,7 +323,12 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id sama5d4_wdt_of_match[] = {
-	{ .compatible = "atmel,sama5d4-wdt", },
+	{
+		.compatible = "atmel,sama5d4-wdt",
+	},
+	{
+		.compatible = "microchip,sam9x60-wdt",
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match);