arm64: dts: mt8173: Add dynamic power node.
Subsystems (2)
PATCH RESEND 1/1 arm64: dts: mt8173: Add dynamic power node.
From: "michael.kao" <[email protected]>
This device node is for calculating dynamic power in mW. Since mt8173 has two clusters, there are two dynamic power coefficient as well.
--- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/mediatek/mt8173.dtsi +4 -0
@@ -157,6 +157,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";
@@ -170,6 +171,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";
@@ -183,6 +185,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";
@@ -196,6 +199,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";
Signature · 5 lines
2.18.0 _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Hi Michael,
Quoted 5 lines · On 22/11/2019 10:06, [email protected] wrote:
From: "michael.kao" <[email protected]>
This device node is for calculating dynamic power in mW. Since mt8173 has two clusters, there are two dynamic power coefficient as well.
Are you sure about the values? Usually, Big is ~x4 little, here it is ~x2.
Quoted 44 lines
Signed-off-by Dawei Chien <[email protected]>Signed-off-by Michael.Kao <[email protected]>--- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++++ 1 file changed, 4 insertions(+)arch/arm64/boot/dts/mediatek/mt8173.dtsi +4
-0@@ -157,6 +157,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";@@ -170,6 +171,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";@@ -183,6 +185,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";@@ -196,6 +199,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 11 lines · Daniel Lezcano
Hi Michael,
Quoted 5 lines · On 22/11/2019 10:06, [email protected] wrote:
From: "michael.kao" <[email protected]>
This device node is for calculating dynamic power in mW. Since mt8173 has two clusters, there are two dynamic power coefficient as well.
Are you sure about the values? Usually, Big is ~x4 little, here it is ~x2.
Hi Daniel,
I have confirmed again with our IC designer.
The dynamic power coefficients are these value is right. Designer comment that it is result from different IC implement.
Quoted 47 lines
Quoted 45 lines
Signed-off-by Dawei Chien <[email protected]>Signed-off-by Michael.Kao <[email protected]>--- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++++ 1 file changed, 4 insertions(+)arch/arm64/boot/dts/mediatek/mt8173.dtsi +4
-0@@ -157,6 +157,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";@@ -170,6 +171,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";@@ -183,6 +185,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";@@ -196,6 +199,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";
Quoted 11 lines · Michael Kao
Quoted 10 lines · Daniel Lezcano
Hi Michael,
Quoted 5 lines · On 22/11/2019 10:06, [email protected] wrote:
From: "michael.kao" <[email protected]>
This device node is for calculating dynamic power in mW. Since mt8173 has two clusters, there are two dynamic power coefficient as well.
Quoted 7 lines
Quoted 1 line
Are you sure about the values? Usually, Big is ~x4 little, here it is ~x2.
Hi Daniel,
I have confirmed again with our IC designer.
The dynamic power coefficients are these value is right. Designer comment that it is result from different IC implement.
Applied to v5.5-next/dts64
Thanks!
Matthias
Quoted 48 lines
Quoted 47 lines
Quoted 45 lines
Signed-off-by Dawei Chien <[email protected]>Signed-off-by Michael.Kao <[email protected]>--- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++++ 1 file changed, 4 insertions(+)arch/arm64/boot/dts/mediatek/mt8173.dtsi +4
-0@@ -157,6 +157,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";@@ -170,6 +171,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";@@ -183,6 +185,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";@@ -196,6 +199,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate";