Skip to contentSkip to conversation

mac80211_hwsim: enable parent TSF feature

PATCH Superseded James Prestwood 2 participants 3 messages Nov 22, 2019 Networking drivers (wireless)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 mac80211_hwsim: enable parent TSF feature

Support for this is already in nl80211, and some code paths in mac80211_hwsim already set the rx_status to allow the parent TSF value to be sent to user space.

---
 drivers/net/wireless/mac80211_hwsim.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/mac80211_hwsim.c +1 -0
index 772e54f0696f..e9bc599481d4 100644
@@ -2825,6 +2825,7 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 			       NL80211_FEATURE_DYNAMIC_SMPS |
 			       NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
 	wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
+	wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_BSS_PARENT_TSF);
 
 	hw->wiphy->interface_modes = param->iftypes;
 
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 2/2 mac80211_hwsim: set rx_status mactime/flag for wmediumd path

This patch sets the required rx_status mactime and flags in order for the parent TSF value to be calculated and sent to userspace. This is already done elsewhere, but this patch allows this to work for the wmediumd code path.

---
 drivers/net/wireless/mac80211_hwsim.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/net/wireless/mac80211_hwsim.c +14 -0
index e9bc599481d4..01b2ac9707cc 100644
@@ -3238,6 +3238,8 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 	int frame_data_len;
 	void *frame_data;
 	struct sk_buff *skb = NULL;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb_2->data;
+	u64 now;
 
 	if (!info->attrs[HWSIM_ATTR_ADDR_RECEIVER] ||
 	    !info->attrs[HWSIM_ATTR_FRAME] ||
@@ -3300,6 +3302,18 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 	rx_status.rate_idx = nla_get_u32(info->attrs[HWSIM_ATTR_RX_RATE]);
 	rx_status.signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]);
 
+	if (ieee80211_is_beacon(hdr->frame_control) ||
+	    ieee80211_is_probe_resp(hdr->frame_control)) {
+		rx_status.boottime_ns = ktime_get_boottime_ns();
+		now = data2->abs_bcn_ts;
+	} else {
+		now = mac80211_hwsim_get_tsf_raw();
+	}
+
+	rx_status.mactime = now + data2->tsf_offset;
+
+	rx_status.flag |= RX_FLAG_MACTIME_START;
+
 	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
 	data2->rx_pkts++;
 	data2->rx_bytes += skb->len;
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Re: [PATCH v2 2/2] mac80211_hwsim: set rx_status mactime/flag for wmediumd path

Quoted 5 lines · James Prestwood

This patch sets the required rx_status mactime and flags in order for the parent TSF value to be calculated and sent to userspace. This is already done elsewhere, but this patch allows this to work for the wmediumd code path.

:)

Now you just need a s-o-b.

johannes