dt-bindings: net: bluetooth: update broadcom-bluetooth
Subsystems (3)
Marcel Holtmann
maintainerPATCH 3/4 dt-bindings: net: bluetooth: update broadcom-bluetooth
From: Abhishek Pandit-Subedi <[email protected]>
Add documentation for brcm,bt-pcm-int-params vendor specific configuration of the SCO PCM settings.
Signed-off-by Abhishek Pandit-Subedi <[email protected]>
Signed-off-by Marcel Holtmann <[email protected]>
--- .../devicetree/bindings/net/broadcom-bluetooth.txt | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +7 -0
@@ -30,6 +30,12 @@ Optional properties: - "lpo": external low power 32.768 kHz clock - vbat-supply: phandle to regulator supply for VBAT - vddio-supply: phandle to regulator supply for VDDIO + - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array + - sco-routing: PCM, Transport, Codec, I2S + - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps + - pcm-frame-type: short, long + - pcm-sync-mode: slave, master + - pcm-clock-mode: slave, master Example:
@@ -41,5 +47,6 @@ Example: bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <921600>; + brcm,bt-pcm-int-params = [1 2 0 1 1]; }; };
Signature · 1 line
2.23.0
Quoted 17 lines · Marcel Holtmann
From: Abhishek Pandit-Subedi <[email protected]>
Add documentation for brcm,bt-pcm-int-params vendor specific configuration of the SCO PCM settings.
Signed-off-by Abhishek Pandit-Subedi <[email protected]>Signed-off-by Marcel Holtmann <[email protected]>--- .../devicetree/bindings/net/broadcom-bluetooth.txt | 7 +++++++ 1 file changed, 7 insertions(+)Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +0
-0
Documentation/devicetree/bindings/net/broadcom-bluetooth.txt Optional properties: · line 34
Quoted 5 lines
Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +2
-0@@ -30,6 +30,12 @@ Optional properties: - "lpo": external low power 32.768 kHz clock - vbat-supply: phandle to regulator supply for VBAT - vddio-supply: phandle to regulator supply for VDDIO + - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array + - sco-routing: PCM, Transport, Codec, I2S
Consider, 0 = PCM to show 0-indexing.
Quoted 15 lines
Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +5
-1+ - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps + - pcm-frame-type: short, long + - pcm-sync-mode: slave, master + - pcm-clock-mode: slave, master Example:@@ -41,5 +47,6 @@ Example: bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <921600>; + brcm,bt-pcm-int-params = [1 2 0 1 1]; }; }; --
Quoted 2 lines
2.23.0
Looks mostly good.