Skip to contentSkip to conversation

The sata port can be configured when driver model enabled.

PATCH New liu hao 2 participants 2 messages Nov 4, 2019 – Nov 23, 2019 libata

lore
Share & tools
lore

liu hao

author
#0 lore raw

PATCH 1/1 The sata port can be configured when driver model enabled.

- CONFIG_SYS_SCSI_MAX_SCSI_ID
- CONFIG_SYS_SCSI_MAX_LUN

- These two configs can be used here.

---
Changes for v1:
- The sata driver only support 2 ports.
It is not suited for all user.
We can make it can be configured.

---
 drivers/ata/ahci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/ata/ahci.c +2 -2
index d10f9f0..594982c 100644
@@ -1167,8 +1167,8 @@ int ahci_probe_scsi(struct udevice *ahci_dev, ulong base)
 		return -ENODEV;
 	uc_plat = dev_get_uclass_platdata(dev);
 	uc_plat->base = base;
-	uc_plat->max_lun = 1;
-	uc_plat->max_id = 2;
+	uc_plat->max_lun = CONFIG_SYS_SCSI_MAX_LUN;
+	uc_plat->max_id = CONFIG_SYS_SCSI_MAX_SCSI_ID;
 
 	uc_priv = dev_get_uclass_priv(ahci_dev);
 	ret = ahci_init_one(uc_priv, dev);
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 The sata port can be configured when driver model enabled.

Quoted 11 lines · liu hao

- CONFIG_SYS_SCSI_MAX_SCSI_ID
- CONFIG_SYS_SCSI_MAX_LUN

- These two configs can be used here.

---
Changes for v1:
- The sata driver only support 2 ports.
It is not suited for all user.
We can make it can be configured.

This breaks boards such as A20-OLinuXino_MICRO-eMMC

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191123/41ef0e63/attachment.sig>