Skip to contentSkip to conversation

drm/msm/adreno: fix zap vs no-zap handling

PATCH New Rob Clark 1 participant 1 message Nov 24, 2019

Subsystems (4)
lore
Share & tools
lore

Rob Clark

author
#0 lore raw

PATCH 1/1 drm/msm/adreno: fix zap vs no-zap handling

From: Rob Clark <[email protected]>

We can have two cases, when it comes to "zap" fw. Either the fw requires zap fw to take the GPU out of secure mode at boot, or it does not and we can write RBBM_SECVID_TRUST_CNTL directly. Previously we decided based on whether zap fw load succeeded, but this is not a great plan because:

1) we could have zap fw in the filesystem on a device where it is not required
2) we could have the inverse case

Instead, shift to deciding based on whether we have a 'zap-shader' node in dt. In practice, there is only one device (currently) with upstream dt that does not use zap (cheza), and it already has a /delete-node/ for the zap-shader node.

Fixes abccb9fe3267 ("drm/msm/a6xx: Add zap shader load")
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 11 +++++++++--
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 11 +++++++++--
 2 files changed, 18 insertions(+), 4 deletions(-)
drivers/gpu/drm/msm/adreno/a5xx_gpu.c +9 -2
index b02e2042547f..7d9e63e20ded 100644
@@ -753,11 +753,18 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 		gpu->funcs->flush(gpu, gpu->rb[0]);
 		if (!a5xx_idle(gpu, gpu->rb[0]))
 			return -EINVAL;
-	} else {
-		/* Print a warning so if we die, we know why */
+	} else if (ret == -ENODEV) {
+		/*
+		 * This device does not use zap shader (but print a warning
+		 * just in case someone got their dt wrong.. hopefully they
+		 * have a debug UART to realize the error of their ways...
+		 * if you mess this up you are about to crash horribly)
+		 */
 		dev_warn_once(gpu->dev->dev,
 			"Zap shader not enabled - using SECVID_TRUST_CNTL instead\n");
 		gpu_write(gpu, REG_A5XX_RBBM_SECVID_TRUST_CNTL, 0x0);
+	} else {
+		return ret;
 	}
 
 	/* Last step - yield the ringbuffer */
drivers/gpu/drm/msm/adreno/a6xx_gpu.c +9 -2
index dc8ec2c94301..686c34d706b0 100644
@@ -537,12 +537,19 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
 		a6xx_flush(gpu, gpu->rb[0]);
 		if (!a6xx_idle(gpu, gpu->rb[0]))
 			return -EINVAL;
-	} else {
-		/* Print a warning so if we die, we know why */
+	} else if (ret == -ENODEV) {
+		/*
+		 * This device does not use zap shader (but print a warning
+		 * just in case someone got their dt wrong.. hopefully they
+		 * have a debug UART to realize the error of their ways...
+		 * if you mess this up you are about to crash horribly)
+		 */
 		dev_warn_once(gpu->dev->dev,
 			"Zap shader not enabled - using SECVID_TRUST_CNTL instead\n");
 		gpu_write(gpu, REG_A6XX_RBBM_SECVID_TRUST_CNTL, 0x0);
 		ret = 0;
+	} else {
+		return ret;
 	}
 
 out:
Signature · 1 line
2.23.0