ARM: dts: ux500: Move generic pin configs out of ste-href-family-pinctrl.dtsi
PATCH 1/5 ARM: dts: ux500: Move generic pin configs out of ste-href-family-pinctrl.dtsi
All existing Ux500 boards make use of ste-href-family-pinctrl.dtsi, which contains shared pin configurations for UART, I2C and SDI. Most of these can be also used for devices not based on HREF.
Move the generic pin configs into a new device tree include "ste-dbx5x0-pinctrl.dtsi". There is no functional change (yet), as a next step we will rename the pin configs to use more generic names.
--- arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 529 +++++++++++++++++ .../arm/boot/dts/ste-href-family-pinctrl.dtsi | 532 +----------------- 2 files changed, 530 insertions(+), 531 deletions(-) create mode 100644 arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi new file +529 -0
@@ -0,0 +1,529 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Linaro Ltd. + */ + +#include "ste-nomadik-pinctrl.dtsi" + +&pinctrl { + /* Settings for all UART default and sleep states */ + uart0 { + uart0_default_mode: uart0_default { + default_mux { + function = "u0"; + groups = "u0_a_1"; + }; + default_cfg1 { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + ste,config = <&out_hi>; + }; + }; + + uart0_sleep_mode: uart0_sleep { + sleep_cfg1 { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO1_AJ3"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + pins = "GPIO3_AH3"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart1 { + uart1_default_mode: uart1_default { + default_mux { + function = "u1"; + groups = "u1rxtx_a_1"; + }; + default_cfg1 { + pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart1_sleep_mode: uart1_sleep { + sleep_cfg1 { + pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart2 { + uart2_default_mode: uart2_default { + default_mux { + function = "u2"; + groups = "u2rxtx_c_1"; + }; + default_cfg1 { + pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart2_sleep_mode: uart2_sleep { + sleep_cfg1 { + pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_wkup_pdis>; + }; + }; + }; + + /* Settings for all I2C default and sleep states */ + i2c0 { + i2c0_default_mode: i2c_default { + default_mux { + function = "i2c0"; + groups = "i2c0_a_1"; + }; + default_cfg1 { + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c0_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c1 { + i2c1_default_mode: i2c_default { + default_mux { + function = "i2c1"; + groups = "i2c1_b_2"; + }; + default_cfg1 { + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c1_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c2 { + i2c2_default_mode: i2c_default { + default_mux { + function = "i2c2"; + groups = "i2c2_b_2"; + }; + default_cfg1 { + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c2_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c3 { + i2c3_default_mode: i2c_default { + default_mux { + function = "i2c3"; + groups = "i2c3_c_2"; + }; + default_cfg1 { + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c3_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Activating I2C4 will conflict with UART1 about the same pins so do not + * enable I2C4 and UART1 at the same time. + */ + i2c4 { + i2c4_default_mode: i2c_default { + default_mux { + function = "i2c4"; + groups = "i2c4_b_1"; + }; + default_cfg1 { + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c4_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* Settings for all MMC/SD/SDIO default and sleep states */ + sdi0 { + /* This is the external SD card slot, 4 bits wide */ + sdi0_default_mode: sdi0_default { + default_mux { + function = "mc0"; + groups = "mc0_a_1"; + }; + default_cfg1 { + pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&out_hi>; + }; + default_cfg2 { + pins = "GPIO22_AA3"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg4 { + pins = + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi0_sleep_mode: sdi0_sleep { + sleep_cfg1 { + pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO22_AA3", /* FBCLK */ + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg3 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + }; + }; + + sdi1 { + /* This is the WLAN SDIO 4 bits wide */ + sdi1_default_mode: sdi1_default { + default_mux { + function = "mc1"; + groups = "mc1_a_1"; + }; + default_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO209_AG15"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi1_sleep_mode: sdi1_sleep { + sleep_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO209_AG15", /* FBCLK */ + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + sdi2 { + /* This is the eMMC 8 bits wide, usually PoP eMMC */ + sdi2_default_mode: sdi2_default { + default_mux { + function = "mc2"; + groups = "mc2_a_1"; + }; + default_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO129_B4", /* CMD */ + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi2_sleep_mode: sdi2_sleep { + sleep_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO130_C8", /* FBCLK */ + "GPIO129_B4"; /* CMD */ + ste,config = <&in_wkup_pdis_en>; + }; + sleep_cfg3 { + pins = + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_wkup_pdis>; + }; + }; + }; + + sdi4 { + /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ + sdi4_default_mode: sdi4_default { + default_mux { + function = "mc4"; + groups = "mc4_a_1"; + }; + default_cfg1 { + pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO202_AF25"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi4_sleep_mode: sdi4_sleep { + sleep_cfg1 { + pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO202_AF25", /* FBCLK */ + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Multi-rate serial ports (MSPs) - MSP3 output is internal and + * cannot be muxed onto any pins. + */ + msp0 { + msp0_default_mode: msp0_default { + default_msp0_mux { + function = "msp0"; + groups = "msp0txrx_a_1", "msp0tfstck_a_1"; + }; + default_msp0_cfg { + pins = + "GPIO12_AC4", /* TXD */ + "GPIO15_AC3", /* RXD */ + "GPIO13_AF3", /* TFS */ + "GPIO14_AE3"; /* TCK */ + ste,config = <&in_nopull>; + }; + }; + }; + + msp1 { + msp1_default_mode: msp1_default { + default_mux { + function = "msp1"; + groups = "msp1txrx_a_1", "msp1_a_1"; + }; + default_cfg1 { + pins = "GPIO33_AF2"; + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = + "GPIO34_AE1", + "GPIO35_AE2", + "GPIO36_AG2"; + ste,config = <&in_nopull>; + }; + }; + }; + + msp2 { + msp2_default_mode: msp2_default { + /* MSP2 usually used for HDMI audio */ + default_mux { + function = "msp2"; + groups = "msp2_a_1"; + }; + default_cfg1 { + pins = + "GPIO193_AH27", /* TXD */ + "GPIO194_AF27", /* TCK */ + "GPIO195_AG28"; /* TFS */ + ste,config = <&in_pd>; + }; + default_cfg2 { + pins = "GPIO196_AG26"; /* RXD */ + ste,config = <&out_lo>; + }; + }; + }; + + musb { + musb_default_mode: musb_default { + default_mux { + function = "usb"; + groups = "usb_a_1"; + }; + default_cfg1 { + pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29", /* DIR */ + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&in_nopull>; + }; + default_cfg2 { + pins = "GPIO257_AE29"; /* STP */ + ste,config = <&out_hi>; + }; + }; + + musb_sleep_mode: musb_sleep { + sleep_cfg1 { + pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29"; /* DIR */ + ste,config = <&slpm_wkup_pdis_en>; + }; + sleep_cfg2 { + pins = "GPIO257_AE29"; /* STP */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + pins = + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&slpm_in_wkup_pdis_en>; + }; + }; + }; +};
arch/arm/boot/dts/ste-href-family-pinctrl.dtsi +1 -531
548 lines not on this page · raw message
Signature · 1 line
2.24.0
PATCH 2/5 ARM: dts: ux500: Rename generic pin configs according to pin group
Some components (e.g. SDI, I2C) can be used with different pin assignments. Before we can add the alternative configurations, we need to rename the current configurations to more generic names.
Each pin configuration usually configures one specific pin group. Therefore we rename the configurations to use the pin group as name. Make up for the slightly longer names by removing the "_mode" suffix.
Rename all existing uses to use the new labels.
--- arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 58 ++++++++++----------- arch/arm/boot/dts/ste-href.dtsi | 62 +++++++++++++---------- arch/arm/boot/dts/ste-snowball.dts | 52 +++++++++---------- 3 files changed, 90 insertions(+), 82 deletions(-)
arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi +29 -29
@@ -8,7 +8,7 @@ &pinctrl { /* Settings for all UART default and sleep states */ uart0 { - uart0_default_mode: uart0_default { + u0_a_1_default: u0_a_1_default { default_mux { function = "u0"; groups = "u0_a_1";
@@ -23,7 +23,7 @@ }; }; - uart0_sleep_mode: uart0_sleep { + u0_a_1_sleep: u0_a_1_sleep { sleep_cfg1 { pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ ste,config = <&slpm_in_wkup_pdis>;
@@ -40,7 +40,7 @@ }; uart1 { - uart1_default_mode: uart1_default { + u1rxtx_a_1_default: u1rxtx_a_1_default { default_mux { function = "u1"; groups = "u1rxtx_a_1";
@@ -55,7 +55,7 @@ }; }; - uart1_sleep_mode: uart1_sleep { + u1rxtx_a_1_sleep: u1rxtx_a_1_sleep { sleep_cfg1 { pins = "GPIO4_AH6"; /* RXD */ ste,config = <&slpm_in_wkup_pdis>;
@@ -68,7 +68,7 @@ }; uart2 { - uart2_default_mode: uart2_default { + u2rxtx_c_1_default: u2rxtx_c_1_default { default_mux { function = "u2"; groups = "u2rxtx_c_1";
@@ -83,7 +83,7 @@ }; }; - uart2_sleep_mode: uart2_sleep { + u2rxtx_c_1_sleep: u2rxtx_c_1_sleep { sleep_cfg1 { pins = "GPIO29_W2"; /* RXD */ ste,config = <&in_wkup_pdis>;
@@ -97,7 +97,7 @@ /* Settings for all I2C default and sleep states */ i2c0 { - i2c0_default_mode: i2c_default { + i2c0_a_1_default: i2c0_a_1_default { default_mux { function = "i2c0"; groups = "i2c0_a_1";
@@ -108,7 +108,7 @@ }; }; - i2c0_sleep_mode: i2c_sleep { + i2c0_a_1_sleep: i2c0_a_1_sleep { sleep_cfg1 { pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>;
@@ -117,7 +117,7 @@ }; i2c1 { - i2c1_default_mode: i2c_default { + i2c1_b_2_default: i2c1_b_2_default { default_mux { function = "i2c1"; groups = "i2c1_b_2";
@@ -128,7 +128,7 @@ }; }; - i2c1_sleep_mode: i2c_sleep { + i2c1_b_2_sleep: i2c1_b_2_sleep { sleep_cfg1 { pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>;
@@ -137,7 +137,7 @@ }; i2c2 { - i2c2_default_mode: i2c_default { + i2c2_b_2_default: i2c2_b_2_default { default_mux { function = "i2c2"; groups = "i2c2_b_2";
@@ -148,7 +148,7 @@ }; }; - i2c2_sleep_mode: i2c_sleep { + i2c2_b_2_sleep: i2c2_b_2_sleep { sleep_cfg1 { pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>;
@@ -157,7 +157,7 @@ }; i2c3 { - i2c3_default_mode: i2c_default { + i2c3_c_2_default: i2c3_c_2_default { default_mux { function = "i2c3"; groups = "i2c3_c_2";
@@ -168,7 +168,7 @@ }; }; - i2c3_sleep_mode: i2c_sleep { + i2c3_c_2_sleep: i2c3_c_2_sleep { sleep_cfg1 { pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>;
@@ -181,7 +181,7 @@ * enable I2C4 and UART1 at the same time. */ i2c4 { - i2c4_default_mode: i2c_default { + i2c4_b_1_default: i2c4_b_1_default { default_mux { function = "i2c4"; groups = "i2c4_b_1";
@@ -192,7 +192,7 @@ }; }; - i2c4_sleep_mode: i2c_sleep { + i2c4_b_1_sleep: i2c4_b_1_sleep { sleep_cfg1 { pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ ste,config = <&slpm_in_wkup_pdis>;
@@ -203,7 +203,7 @@ /* Settings for all MMC/SD/SDIO default and sleep states */ sdi0 { /* This is the external SD card slot, 4 bits wide */ - sdi0_default_mode: sdi0_default { + mc0_a_1_default: mc0_a_1_default { default_mux { function = "mc0"; groups = "mc0_a_1";
@@ -234,7 +234,7 @@ }; }; - sdi0_sleep_mode: sdi0_sleep { + mc0_a_1_sleep: mc0_a_1_sleep { sleep_cfg1 { pins = "GPIO18_AC2", /* CMDDIR */
@@ -261,7 +261,7 @@ sdi1 { /* This is the WLAN SDIO 4 bits wide */ - sdi1_default_mode: sdi1_default { + mc1_a_1_default: mc1_a_1_default { default_mux { function = "mc1"; groups = "mc1_a_1";
@@ -285,7 +285,7 @@ }; }; - sdi1_sleep_mode: sdi1_sleep { + mc1_a_1_sleep: mc1_a_1_sleep { sleep_cfg1 { pins = "GPIO208_AH16"; /* CLK */ ste,config = <&slpm_out_lo_wkup_pdis>;
@@ -305,7 +305,7 @@ sdi2 { /* This is the eMMC 8 bits wide, usually PoP eMMC */ - sdi2_default_mode: sdi2_default { + mc2_a_1_default: mc2_a_1_default { default_mux { function = "mc2"; groups = "mc2_a_1";
@@ -333,7 +333,7 @@ }; }; - sdi2_sleep_mode: sdi2_sleep { + mc2_a_1_sleep: mc2_a_1_sleep { sleep_cfg1 { pins = "GPIO128_A5"; /* CLK */ ste,config = <&out_lo_wkup_pdis>;
@@ -361,7 +361,7 @@ sdi4 { /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ - sdi4_default_mode: sdi4_default { + mc4_a_1_default: mc4_a_1_default { default_mux { function = "mc4"; groups = "mc4_a_1";
@@ -389,7 +389,7 @@ }; }; - sdi4_sleep_mode: sdi4_sleep { + mc4_a_1_sleep: mc4_a_1_sleep { sleep_cfg1 { pins = "GPIO203_AE23"; /* CLK */ ste,config = <&out_lo_wkup_pdis>;
@@ -416,7 +416,7 @@ * cannot be muxed onto any pins. */ msp0 { - msp0_default_mode: msp0_default { + msp0txrxtfstck_a_1_default: msp0txrxtfstck_a_1_default { default_msp0_mux { function = "msp0"; groups = "msp0txrx_a_1", "msp0tfstck_a_1";
@@ -433,7 +433,7 @@ }; msp1 { - msp1_default_mode: msp1_default { + msp1txrx_a_1_default: msp1txrx_a_1_default { default_mux { function = "msp1"; groups = "msp1txrx_a_1", "msp1_a_1";
@@ -453,7 +453,7 @@ }; msp2 { - msp2_default_mode: msp2_default { + msp2_a_1_default: msp2_a_1_default { /* MSP2 usually used for HDMI audio */ default_mux { function = "msp2";
@@ -474,7 +474,7 @@ }; musb { - musb_default_mode: musb_default { + usb_a_1_default: usb_a_1_default { default_mux { function = "usb"; groups = "usb_a_1";
@@ -500,7 +500,7 @@ }; }; - musb_sleep_mode: musb_sleep { + usb_a_1_sleep: usb_a_1_sleep { sleep_cfg1 { pins = "GPIO256_AF28", /* NXT */
arch/arm/boot/dts/ste-href.dtsi +35 -27
149 lines not on this page · raw message
arch/arm/boot/dts/ste-snowball.dts +26 -26
133 lines not on this page · raw message
Signature · 1 line
2.24.0
Re: [PATCH 2/5] ARM: dts: ux500: Rename generic pin configs according to pin group
Quoted 11 lines · Stephan Gerhold
Some components (e.g. SDI, I2C) can be used with different pin assignments. Before we can add the alternative configurations, we need to rename the current configurations to more generic names.
Each pin configuration usually configures one specific pin group. Therefore we rename the configurations to use the pin group as name. Make up for the slightly longer names by removing the "
_mode" suffix.Rename all existing uses to use the new labels.
Signed-off-by Stephan Gerhold <[email protected]>
Patch applied for v5.6.
Yours,
Linus Walleij
PATCH 3/5 ARM: dts: ux500: Add alternative SDI pin configs
In reply to Stephan GerholdSDI0/SDI1 can be used in configurations where some of the pins (e.g. direction control) are not used. The pinctrl driver has separate pin groups for them.
Add new pin configurations for:
- mc0_a_2: like mc0_a_1, but without CMDDIR/DAT0DIR/DAT2DIR
- mc1_a_2: like mc1_a_1, but without FBCLK
--- arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 77 +++++++++++++++++++++++ 1 file changed, 77 insertions(+)
arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi +77 -0
@@ -257,6 +257,47 @@ ste,config = <&slpm_out_lo_wkup_pdis>; }; }; + + mc0_a_2_default: mc0_a_2_default { + default_mux { + function = "mc0"; + groups = "mc0_a_2"; + }; + default_cfg1 { + pins = "GPIO22_AA3"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg2 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg3 { + pins = + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + mc0_a_2_sleep: mc0_a_2_sleep { + sleep_cfg1 { + pins = + "GPIO22_AA3", /* FBCLK */ + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + }; }; sdi1 {
@@ -301,6 +342,42 @@ ste,config = <&slpm_in_wkup_pdis>; }; }; + + mc1_a_2_default: mc1_a_2_default { + default_mux { + function = "mc1"; + groups = "mc1_a_2"; + }; + default_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + mc1_a_2_sleep: mc1_a_2_sleep { + sleep_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; }; sdi2 {
Signature · 1 line
2.24.0
Re: [PATCH 3/5] ARM: dts: ux500: Add alternative SDI pin configs
Quoted 9 lines · Stephan Gerhold
SDI0/SDI1 can be used in configurations where some of the pins (e.g. direction control) are not used. The pinctrl driver has separate pin groups for them.
Add new pin configurations for:
-mc0_a_2: likemc0_a_1, but without CMDDIR/DAT0DIR/DAT2DIR
-mc1_a_2: likemc1_a_1, but without FBCLKSigned-off-by Stephan Gerhold <[email protected]>
Patch applied for v5.6
Yours,
Linus Walleij
PATCH 4/5 ARM: dts: ux500: Add pin configs for UART1 CTS/RTS pins
In reply to Stephan GerholdUART1 an be optionally used with additional CTS/RTS pins. The pinctrl driver has an extra "u1ctsrts_a_1" pin group for them.
Add a new pin configuration to configure them correctly if needed.
--- arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+)
arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi +26 -0
@@ -65,6 +65,32 @@ ste,config = <&slpm_out_wkup_pdis>; }; }; + + u1ctsrts_a_1_default: u1ctsrts_a_1_default { + default_mux { + function = "u1"; + groups = "u1ctsrts_a_1"; + }; + default_cfg1 { + pins = "GPIO6_AF6"; /* CTS */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO7_AG5"; /* RTS */ + ste,config = <&out_hi>; + }; + }; + + u1ctsrts_a_1_sleep: u1ctsrts_a_1_sleep { + sleep_cfg1 { + pins = "GPIO6_AF6"; /* CTS */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO7_AG5"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + }; }; uart2 {
Signature · 1 line
2.24.0
Re: [PATCH 4/5] ARM: dts: ux500: Add pin configs for UART1 CTS/RTS pins
Quoted 1 line · Stephan Gerhold
UART1 an be optionally used with additional CTS/RTS pins.
s/an/can, duh.
I will fix this if a v2 is needed for some reason; otherwise, can you fix this when applying the patch?
Thanks!
Quoted 49 lines
The pinctrl driver has an extra "
u1ctsrts_a_1" pin group for them.Add a new pin configuration to configure them correctly if needed.
Signed-off-by Stephan Gerhold <[email protected]>--- arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+)arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi +26
-0@@ -65,6 +65,32 @@ ste,config = <&slpm_out_wkup_pdis>; }; }; + + u1ctsrts_a_1_default: u1ctsrts_a_1_default { + default_mux { + function = "u1"; + groups = "u1ctsrts_a_1"; + }; + default_cfg1 { + pins = "GPIO6_AF6"; /* CTS */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO7_AG5"; /* RTS */ + ste,config = <&out_hi>; + }; + }; + + u1ctsrts_a_1_sleep: u1ctsrts_a_1_sleep { + sleep_cfg1 { + pins = "GPIO6_AF6"; /* CTS */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO7_AG5"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + }; }; uart2 {Signature · 1 line
2.24.0
Re: [PATCH 4/5] ARM: dts: ux500: Add pin configs for UART1 CTS/RTS pins
In reply to Stephan GerholdQuoted 6 lines · Stephan Gerhold
UART1 an be optionally used with additional CTS/RTS pins. The pinctrl driver has an extra "
u1ctsrts_a_1" pin group for them.Add a new pin configuration to configure them correctly if needed.
Signed-off-by Stephan Gerhold <[email protected]>
Patch applied for v5.6 fixing up a spelling mistake in the process.
Yours,
Linus Walleij
PATCH 5/5 ARM: dts: ux500: nomadik-pinctrl: Add &gpio_in_nopull
In reply to Stephan Gerholdste-nomadik-pinctrl.dtsi already defines in_nopull and gpio_in_pu/pd, but there is no node to configure a pin as GPIO without pull up/down. Add a new &gpio_in_nopull node for this.
--- arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi +5 -0
@@ -25,6 +25,11 @@ ste,output = <OUTPUT_LOW>; }; + gpio_in_nopull: gpio_input_nopull { + ste,gpio = <GPIOMODE_ENABLED>; + ste,input = <INPUT_NOPULL>; + }; + gpio_in_pu: gpio_input_pull_up { ste,gpio = <GPIOMODE_ENABLED>; ste,input = <INPUT_PULLUP>;
Signature · 1 line
2.24.0
Quoted 10 lines · Stephan Gerhold
All existing Ux500 boards make use of
ste-href-family-pinctrl.dtsi, which contains shared pin configurations for UART, I2C and SDI. Most of these can be also used for devices not based on HREF.Move the generic pin configs into a new device tree include "
ste-dbx5x0-pinctrl.dtsi". There is no functional change (yet), as a next step we will rename the pin configs to use more generic names.Signed-off-by Stephan Gerhold <[email protected]>
Patch applied for v5.6.
Yours,
Linus Walleij