Qemu: virtio-net XDP offload
Subsystems (3)
cover Qemu: virtio-net XDP offload
Note: This RFC has been sent to netdev as well as qemu-devel lists
This patchset implements XDP offload feature in qemu. The successful operation of this feature depends on availability of XDP offload feature in guest, qemu and host. When this feature isn't available in qemu or host, the request from guest to offload an XDP program should fail.
Patch 1/3 adds support for libbpf in configure script. Patch 2/2 enables offloading of ebpf program. Patch 3/3 enabled offloading of ebpf map.
Points for improvement (TODO):
- In future virtio can have feature bit for offloading capability
- TUNGETFEATURES should have a flag to notify about offloading capability
- Submit virtio spec patch to describe XDP offloading feature
- DoS: Offloaded map uses host's memory which is other than what has been allocated for the guest. Offloading many maps of large size can be one of the DoS strategy. Hence qemu should have parameter to limit how many maps guest can offload or how much memory offloaded maps use.
Note:
This set directly modifies virtio_net.h header instead of importing it from existing kernel headers because relevant changes aren't present in kernel repository yet. Hence changes to virtio_net.h are for RFC purpose only.
Jason Wang (2):
virtio-net: add support for offloading XDP program
virtio-net: add support for offloading an ebpf map
Prashant Bhole (1):
configure: add libbpf support
configure | 23 +++ hw/net/Makefile.objs | 2 + hw/net/virtio-net.c | 157 ++++++++++++++++++++ include/net/tap.h | 2 + include/standard-headers/linux/virtio_net.h | 50 +++++++ net/Makefile.objs | 1 + net/tap-bsd.c | 5 + net/tap-linux.c | 48 ++++++ net/tap-linux.h | 1 + net/tap-solaris.c | 5 + net/tap-stub.c | 5 + net/tap.c | 7 + net/tap_int.h | 1 + 13 files changed, 307 insertions(+)
Signature · 1 line
2.20.1
RFC 1/3 configure: add libbpf support
This is a preparation to add libbpf support for Qemu. When it is enabled Qemu can load eBPF programs and manipulated eBPF maps libbpf APIs.
When configured with --enable-libbpf, availability of libbpf is checked. If it exists then CONFIG_LIBBPF is defined and the qemu binary is linked with libbpf.
--- configure | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
configure +23 -0
@@ -504,6 +504,7 @@ debug_mutex="no" libpmem="" default_devices="yes" plugins="no" +libbpf="no" supported_cpu="no" supported_os="no"
@@ -1539,6 +1540,8 @@ for opt do ;; --disable-plugins) plugins="no" ;; + --enable-libbpf) libbpf="yes" + ;; *) echo "ERROR: unknown option $opt" echo "Try '$0 --help' for more information"
@@ -1825,6 +1828,7 @@ disabled with --disable-FEATURE, default is enabled if available: debug-mutex mutex debugging support libpmem libpmem support xkbcommon xkbcommon support + libbpf eBPF program support NOTE: The object files are built at the place where configure is launched EOF
@@ -6084,6 +6088,19 @@ case "$slirp" in ;; esac +########################################## +# Do we have libbpf +if test "$libbpf" != "no" ; then + if $pkg_config libbpf; then + libbpf="yes" + libbpf_libs=$($pkg_config --libs libbpf) + else + if test "$libbpf" == "yes" ; then + feature_not_found "libbpf" "Install libbpf devel" + fi + libbpf="no" + fi +fi ########################################## # End of CC checks
@@ -6599,6 +6616,7 @@ echo "libpmem support $libpmem" echo "libudev $libudev" echo "default devices $default_devices" echo "plugin support $plugins" +echo "XDP offload support $libbpf" if test "$supported_cpu" = "no"; then echo
@@ -7457,6 +7475,11 @@ if test "$plugins" = "yes" ; then fi fi +if test "$libbpf" = "yes" ; then + echo "CONFIG_LIBBPF=y" >> $config_host_mak + echo "LIBBPF_LIBS=$libbpf_libs" >> $config_host_mak +fi + if test "$tcg_interpreter" = "yes"; then QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/tci $QEMU_INCLUDES" elif test "$ARCH" = "sparc64" ; then
Signature · 1 line
2.20.1
RFC 2/3 virtio-net: add support for offloading XDP program
In reply to Prashant BholeFrom: Jason Wang <[email protected]>
This feature involves offloading of XDP program and ebpf map from the guest to the host. This patch takes care of offloadin of program.
A handler for VIRTIO_NET_CTRL_EBPF command is added in virtio-net. The control buffer consist of struct virtio_net_ctrl_ebpf_prog and followed by an ebpf program instructions. An array of bpf_insn is prepared and passed to libbpf API bpf_load_program. The program fd is retuned by the API is then attached to tap fd using TUNSETOFFLOADEDXDP ioctl command.
--- hw/net/virtio-net.c | 69 +++++++++++++++++++++ include/net/tap.h | 2 + include/standard-headers/linux/virtio_net.h | 27 ++++++++ net/Makefile.objs | 1 + net/tap-bsd.c | 5 ++ net/tap-linux.c | 48 ++++++++++++++ net/tap-linux.h | 1 + net/tap-solaris.c | 5 ++ net/tap-stub.c | 5 ++ net/tap.c | 7 +++ net/tap_int.h | 1 + 11 files changed, 171 insertions(+)
hw/net/virtio-net.c +69 -0
@@ -43,6 +43,11 @@#include "monitor/qdev.h" #include "hw/pci/pci.h" +#ifdef CONFIG_LIBBPF +#include <bpf/bpf.h> +#include <bpf/libbpf.h> +#endif +#define VIRTIO_NET_VM_VERSION 11#define MAC_TABLE_ENTRIES 64
@@ -628,6 +633,21 @@ static int peer_attach(VirtIONet *n, int index)return tap_enable (nc->peer); } +static int peer_attach_ebpf (VirtIONet *n,int len,void *insns,uint8_t gpl) +{ +NetClientState *nc =qemu_get_subqueue (n->nic,0 ); + +if (!nc->peer) { +return 0 ; + } + +if (nc->peer->info->type !=NET_CLIENT_DRIVER_TAP ) { +return 0 ; + } + +return tap_attach_ebpf (nc->peer, len, insns, gpl); +} +static int peer_detach (VirtIONet *n,int index) {NetClientState *nc =qemu_get_subqueue (n->nic, index);
@@ -991,6 +1011,53 @@ static int virtio_net_handle_offloads(VirtIONet *n, uint8_t cmd, } } +static int virtio_net_handle_ebpf_prog (VirtIONet *n,struct iovec *iov, +unsigned int iov_cnt) +{ +#ifdef CONFIG_LIBBPF +struct bpf_insn prog[4096 ]; +struct virtio_net_ctrl_ebpf_prog ctrl; +size_t s; +int err =VIRTIO_NET_ERR ; + + s =iov_to_buf (iov, iov_cnt,0 , &ctrl,sizeof (ctrl)); +if (s !=sizeof (ctrl)) { +error_report ("Invalid ebpf prog control buffer" ); + goto err; + } + +if (ctrl.cmd ==VIRTIO_NET_BPF_CMD_SET_OFFLOAD ) { + s =iov_to_buf (iov, iov_cnt,sizeof (ctrl), prog,sizeof (prog)); +if (s != ctrl.len) { +error_report ("Invalid ebpf prog control buffer" ); + goto err; + } + + err =peer_attach_ebpf (n, s, prog, ctrl.gpl_compatible); +if (err) { +error_report ("Failed to attach XDP program" ); + goto err; + } + }else if (ctrl.cmd ==VIRTIO_NET_BPF_CMD_UNSET_OFFLOAD ) { + err =peer_attach_ebpf (n,0 ,NULL ,0 ); + } +err: +return err ?VIRTIO_NET_ERR :VIRTIO_NET_OK ; +#else +return VIRTIO_NET_ERR ; +#endif +} + +static int virtio_net_handle_ebpf (VirtIONet *n,uint8_t cmd, +struct iovec *iov,unsigned int iov_cnt) +{ +if (cmd ==VIRTIO_NET_CTRL_EBPF_PROG ) { +return virtio_net_handle_ebpf_prog (n, iov, iov_cnt); + } + +return VIRTIO_NET_ERR ; +} +static int virtio_net_handle_mac (VirtIONet *n,uint8_t cmd,struct iovec *iov,unsigned int iov_cnt) {
@@ -1208,6 +1275,8 @@ static void virtio_net_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq) status =virtio_net_handle_mq (n, ctrl.cmd, iov, iov_cnt); }else if (ctrl.class ==VIRTIO_NET_CTRL_GUEST_OFFLOADS ) { status =virtio_net_handle_offloads (n, ctrl.cmd, iov, iov_cnt); + }else if (ctrl.class ==VIRTIO_NET_CTRL_EBPF ) { + status =virtio_net_handle_ebpf (n, ctrl.cmd, iov, iov_cnt); } s =iov_from_buf (elem->in_sg, elem->in_num,0 , &status,sizeof (status));
include/net/tap.h +2 -0
@@ -33,6 +33,8 @@ int tap_disable(NetClientState *nc);int tap_get_fd (NetClientState *nc); +int tap_attach_ebpf (NetClientState *nc,int len,void *insns,uint8_t gpl); +struct vhost_net ;struct vhost_net *tap_get_vhost_net (NetClientState *nc);
include/standard-headers/linux/virtio_net.h +27 -0
@@ -261,4 +261,31 @@ struct virtio_net_ctrl_mq {#define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5#define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0 +/* +* Control XDP offloads offloads +* +* When guest wants to offload XDP program to tap device, it calls +* VIRTIO_NET_CTRL_EBPF_PROG along with VIRTIO_NET_BPF_CMD_SET_OFFLOAD +* subcommands. When offloading is successful, the tap device run offloaded +* XDP program for each packet before sending it to the guest. +* +* VIRTIO_NET_BPF_CMD_UNSET_OFFLOAD removes the the offloaded program from +* the tap device, if exists. +*/ + +struct virtio_net_ctrl_ebpf_prog { +/* program length in bytes */ +__virtio32 len; +__virtio16 cmd; +__virtio16 gpl_compatible; +uint8_t insns[0 ]; +}; + +#define VIRTIO_NET_CTRL_EBPF 6 +#define VIRTIO_NET_CTRL_EBPF_PROG 1 + +/* Commands for VIRTIO_NET_CTRL_EBPF_PROG */ +#define VIRTIO_NET_BPF_CMD_SET_OFFLOAD 1 +#define VIRTIO_NET_BPF_CMD_UNSET_OFFLOAD 2 +#endif /* _LINUX_VIRTIO_NET_H */
net/Makefile.objs +1 -0
@@ -28,5 +28,6 @@ common-obj-$(CONFIG_POSIX) += tap.o $(tap-obj-y) common-obj-$(CONFIG_WIN32) += tap-win32.o vde.o-libs = $(VDE_LIBS) +tap-linux.o-libs = $(LIBBPF_LIBS) common-obj-$(CONFIG_CAN_BUS) += can/
net/tap-bsd.c +5 -0
@@ -259,3 +259,8 @@ int tap_fd_get_ifname(int fd, char *ifname) {return -1 ; } + +int tap_fd_attach_ebpf (int fd,int len,void *insns,uint8_t gpl) +{ +return -EINVAL ; +}
net/tap-linux.c +48 -0
57 lines not on this page · raw message
net/tap-linux.h +1 -0
@@ -31,6 +31,7 @@#define TUNSETQUEUE _IOW('T', 217, int)#define TUNSETVNETLE _IOW('T', 220, int)#define TUNSETVNETBE _IOW('T', 222, int) +#define TUNSETOFFLOADEDXDP _IOW('T', 228, int)#endif
net/tap-solaris.c +5 -0
@@ -254,3 +254,8 @@ int tap_fd_get_ifname(int fd, char *ifname) {return -1 ; } + +int tap_fd_attach_ebpf (int fd,int len,void *insns,uint8_t gpl) +{ +return -EINVAL ; +}
net/tap-stub.c +5 -0
@@ -85,3 +85,8 @@ int tap_fd_get_ifname(int fd, char *ifname) {return -1 ; } + +int tap_fd_attach_ebpf (int fd,int len,void *insns,uint8_t gpl) +{ +return -EINVAL ; +}
net/tap.c +7 -0
@@ -971,6 +971,13 @@ int tap_enable(NetClientState *nc) } } +int tap_attach_ebpf (NetClientState *nc,int len,void *insns,uint8_t gpl) +{ +TAPState *s =DO_UPCAST (TAPState, nc, nc); + +return tap_fd_attach_ebpf (s->fd, len, insns, gpl); +} +int tap_disable (NetClientState *nc) {TAPState *s =DO_UPCAST (TAPState, nc, nc);
net/tap_int.h +1 -0
@@ -44,5 +44,6 @@ int tap_fd_set_vnet_be(int fd, int vnet_is_be);int tap_fd_enable (int fd);int tap_fd_disable (int fd);int tap_fd_get_ifname (int fd,char *ifname); +int tap_fd_attach_ebpf (int fd,int len,void *insns,uint8_t gpl);#endif /* NET_TAP_INT_H */
Signature · 1 line
2.20.1
RFC 3/3 virtio-net: add support for offloading an ebpf map
In reply to Prashant BholeFrom: Jason Wang <[email protected]>
This change is a part of XDP offload feature. It handles offloading of eBPF map from the guest.
A command handler for VIRTIO_NET_CTRL_EBPF now checks for subcommand VIRTIO_NET_CTRL_EBPF_MAP and. The control buffer consists of struct virtio_net_ctrl_ebpf_map followed by map key/value or key/key pair. Map manipulation is done using libbpf APIs.
--- hw/net/Makefile.objs | 2 + hw/net/virtio-net.c | 88 +++++++++++++++++++++ include/standard-headers/linux/virtio_net.h | 23 ++++++ 3 files changed, 113 insertions(+)
hw/net/Makefile.objs +2 -0
@@ -52,3 +52,5 @@ common-obj-$(CONFIG_ROCKER) += rocker/rocker.o rocker/rocker_fp.o \ obj-$(call lnot,$(CONFIG_ROCKER)) += rocker/qmp-norocker.o common-obj-$(CONFIG_CAN_BUS) += can/ + +virtio-net.o-libs := $(LIBBPF_LIBS)
hw/net/virtio-net.c +88 -0
100 lines not on this page · raw message
include/standard-headers/linux/virtio_net.h +23 -0
@@ -281,11 +281,34 @@ struct virtio_net_ctrl_ebpf_prog { uint8_t insns[0]; }; +struct virtio_net_ctrl_ebpf_map { +__virtio32 buf_len; +__virtio32 cmd; +__virtio32 map_type; +__virtio32 key_size; +__virtio32 value_size; +__virtio32 max_entries; +__virtio32 map_flags; +__virtio32 map_fd; +__virtio64 flags; +uint8_t buf[0 ]; +}; +#define VIRTIO_NET_CTRL_EBPF 6#define VIRTIO_NET_CTRL_EBPF_PROG 1 +#define VIRTIO_NET_CTRL_EBPF_MAP 2/* Commands for VIRTIO_NET_CTRL_EBPF_PROG */ #define VIRTIO_NET_BPF_CMD_SET_OFFLOAD 1#define VIRTIO_NET_BPF_CMD_UNSET_OFFLOAD 2 +/* Commands for VIRTIO_NET_CTRL_EBPF_MAP */ +#define VIRTIO_NET_BPF_CMD_CREATE_MAP 1 +#define VIRTIO_NET_BPF_CMD_FREE_MAP 2 +#define VIRTIO_NET_BPF_CMD_UPDATE_ELEM 3 +#define VIRTIO_NET_BPF_CMD_LOOKUP_ELEM 4 +#define VIRTIO_NET_BPF_CMD_DELETE_ELEM 5 +#define VIRTIO_NET_BPF_CMD_GET_FIRST 6 +#define VIRTIO_NET_BPF_CMD_GET_NEXT 7 +#endif /* _LINUX_VIRTIO_NET_H */
Signature · 1 line
2.20.1
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the docker-quick@centos7 build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-centos7 V=1 NETWORK=1
time make docker-test-quick@centos7 SHOW_ENV=1 J=14 NETWORK=1 === TEST SCRIPT END ===
CC ui/input-keymap.o
CC ui/input-legacy.o
CC ui/kbd-state.o
/tmp/qemu-test/src/net/tap-linux.c:34:21: fatal error: bpf/bpf.h: No such file or directory
#include <bpf/bpf.h>
^
compilation terminated.
---
SIGN pc-bios/optionrom/linuxboot.bin
SIGN pc-bios/optionrom/kvmvapic.bin
BUILD pc-bios/optionrom/linuxboot_dma.imgmake: *** [net/tap-linux.o] Error 1
make: *** Waiting for unfinished jobs....
BUILD pc-bios/optionrom/pvh.img
BUILD pc-bios/optionrom/linuxboot_dma.raw
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=be849bfed02d4ea7b19f7746fe037bd5', '-u', '1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-3d2z3wl3/src/docker-src.2019-11-26-05.31.05.21708:/var/tmp/qemu:z,ro', 'qemu:centos7', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=be849bfed02d4ea7b19f7746fe037bd5
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-3d2z3wl3/src'
make: *** [docker-run-test-quick@centos7] Error 2
real 1m56.447s
user 0m8.519s
The full log is available at
http://patchew.org/logs/[email protected]/testing.docker-quick@centos7/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Quoted 16 lines · On 11/26/19 7:33 PM, [email protected] wrote:
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the docker-quick@centos7 build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-centos7 V=1 NETWORK=1
time make docker-test-quick@centos7 SHOW_ENV=1 J=14 NETWORK=1 === TEST SCRIPT END ===
Quoted 5 lines
CC ui/input-keymap.o CC ui/input-legacy.o CC ui/kbd-state.o
/tmp/qemu-test/src/net/tap-linux.c:34:21: fatal error:bpf/bpf.h: No such file or directory
#include <bpf/bpf.h>
Sorry, I missed to enclose it in #ifdef CONFIG_LIBBPF. It should be fixed whenever I'll post next revision.
Prashant
Quoted 28 lines
^ compilation terminated. --- SIGN pc-bios/optionrom/linuxboot.bin SIGN pc-bios/optionrom/kvmvapic.bin BUILD pc-bios/optionrom/linuxboot_dma.imgmake: *** [
net/tap-linux.o] Error 1
make: *** Waiting for unfinished jobs....
BUILD pc-bios/optionrom/pvh.img
BUILD pc-bios/optionrom/linuxboot_dma.raw
---
raiseCalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=be849bfed02d4ea7b19f7746fe037bd5', '-u', '1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-3d2z3wl3/src/docker-src.2019-11-26-05.31.05.21708:/var/tmp/qemu:z,ro', 'qemu:centos7', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=be849bfed02d4ea7b19f7746fe037bd5
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-3d2z3wl3/src'
make: *** [docker-run-test-quick@centos7] Error 2real 1m56.447s
user 0m8.519sThe full log is available at
http://patchew.org/logs/[email protected]/testing.docker-quick@centos7/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#! /bin/bash
export ARCH=x86_64
make docker-image-fedora V=1 NETWORK=1
time make docker-test-mingw@fedora J=14 NETWORK=1
=== TEST SCRIPT END ===
CC aarch64-softmmu/hw/arm/musicpal.o
CC aarch64-softmmu/hw/arm/netduino2.o
CC aarch64-softmmu/hw/arm/nseries.o
/tmp/qemu-test/src/hw/net/virtio-net.c:636:12: error: 'peer_attach_ebpf' defined but not used [-Werror=unused-function]
static int peer_attach_ebpf(VirtIONet *n, int len, void *insns, uint8_t gpl)
^~~~~~~~~~~~~~~~cc1: all warnings being treated as errors
make[1]: *** [/tmp/qemu-test/src/rules.mak:69: hw/net/virtio-net.o] Error 1 make[1]: *** Waiting for unfinished jobs....
CC aarch64-softmmu/hw/arm/omap_sx1.o
CC aarch64-softmmu/hw/arm/palm.o
make: *** [Makefile:491: x86_64-softmmu/all] Error 2
make: *** Waiting for unfinished jobs....
CC aarch64-softmmu/hw/arm/gumstix.o
CC aarch64-softmmu/hw/arm/spitz.o
---
CC aarch64-softmmu/gdbstub-xml.o
CC aarch64-softmmu/trace/generated-helpers.o
CC aarch64-softmmu/target/arm/translate-sve.o
/tmp/qemu-test/src/hw/net/virtio-net.c:636:12: error: 'peer_attach_ebpf' defined but not used [-Werror=unused-function]
static int peer_attach_ebpf(VirtIONet *n, int len, void *insns, uint8_t gpl)
^~~~~~~~~~~~~~~~cc1: all warnings being treated as errors
make[1]: *** [/tmp/qemu-test/src/rules.mak:69: hw/net/virtio-net.o] Error 1
make: *** [Makefile:491: aarch64-softmmu/all] Error 2
Traceback (most recent call last):
File "./tests/docker/docker.py", line 662, in <module>
sys.exit(main())
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=5b6acc2ac7494ad6b59706c9dd26c3cd', '-u', '1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-4e2hnnd5/src/docker-src.2019-11-26-05.33.37.332:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-mingw']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=5b6acc2ac7494ad6b59706c9dd26c3cd
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-4e2hnnd5/src'
make: *** [docker-run-test-mingw@fedora] Error 2
real 2m24.967s
user 0m8.999s
The full log is available at
http://patchew.org/logs/[email protected]/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]