drm/mgag200: Add module parameter to pin all buffers at offset 0
Subsystems (3)
Thomas Zimmermann
maintainerPATCH v2 1/1 drm/mgag200: Add module parameter to pin all buffers at offset 0
For hardware that does not interpret the startadd field correctly, add the module parameter 'hw_bug_no_startadd', which enables the workaround.
v2:
* ask user for feedback if the option is active
Signed-off-by Thomas Zimmermann <[email protected]>
Reviewed-by Daniel Vetter <[email protected]>
Cc John Donnelly <[email protected]>
--- drivers/gpu/drm/mgag200/mgag200_drv.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/gpu/drm/mgag200/mgag200_drv.c +13 -0
@@ -27,6 +27,10 @@ int mgag200_modeset = -1;MODULE_PARM_DESC (modeset,"Disable/Enable modesetting" );module_param_named (modeset, mgag200_modeset, int,0400 ); +int mgag200_hw_bug_no_startadd =-1 ; +MODULE_PARM_DESC (modeset,"HW does not interpret scanout-buffer start address correctly" ); +module_param_named (hw_bug_no_startadd, mgag200_hw_bug_no_startadd, int,0400 ); +static struct drm_driver driver;static const struct pci_device_id pciidlist[] = {
@@ -64,6 +68,15 @@ DEFINE_DRM_GEM_FOPS(mgag200_driver_fops);static bool mgag200_pin_bo_at_0 (const struct mga_device *mdev) { +if (mgag200_hw_bug_no_startadd >0 ) { +DRM_WARN_ONCE ("Option hw_bug_no_startedd is enabled. Please " +"report the output of 'lspci -vvnn' to " +"<[email protected]> if this " +"option is required to make mgag200 work " +"correctly on your system.\n" ); +return true; + }else if (!mgag200_hw_bug_no_startadd) +return false;return mdev->flags &MGAG200_FLAG_HW_BUG_NO_STARTADD ; }
Signature · 6 lines
2.23.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel