Skip to contentSkip to conversation

drm/i915: Handle SDEISR according to PCH rather than platform

PATCH In review Matt Roper 4 participants 16 messages Nov 26, 2019 – Nov 27, 2019

Subsystems (3)
lore
Share & tools
lore

Matt Roper

author
#0 lore raw

PATCH 1/3 drm/i915: Handle SDEISR according to PCH rather than platform

The South Display is part of the PCH so we should technically be basing our port detection logic off the PCH in use rather than the platform generation.

Cc Lucas De Marchi <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +4 -4
index 3123958e2081..ddf5bad1b969 100644
@@ -5487,7 +5487,7 @@ static bool icl_combo_port_connected(struct drm_i915_private *dev_priv,
 	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(port);
 }
 
-static bool icl_digital_port_connected(struct intel_encoder *encoder)
+static bool icp_digital_port_connected(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
@@ -5525,9 +5525,9 @@ static bool __intel_digital_port_connected(struct intel_encoder *encoder)
 			return g4x_digital_port_connected(encoder);
 	}
 
-	if (INTEL_GEN(dev_priv) >= 11)
-		return icl_digital_port_connected(encoder);
-	else if (IS_GEN(dev_priv, 10) || IS_GEN9_BC(dev_priv))
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
+		return icp_digital_port_connected(encoder);
+	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_SPT)
 		return spt_digital_port_connected(encoder);
 	else if (IS_GEN9_LP(dev_priv))
 		return bxt_digital_port_connected(encoder);
Signature · 6 lines
2.23.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#1 lore raw

PATCH 2/3 drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port

When looking at SDEISR to determine the connection status of combo outputs, we should use the phy index rather than the port index. Although they're usually the same thing, EHL's DDI-D (port D) is attached to PHY-A and SDEISR doesn't even have bits for a "D" output. It's also possible that future platforms may map DDIs (the internal display engine programming units) to PHYs (the output handling on the IO side) in ways where port!=phy, so let's look at the PHY index by default.

Fixes 719d24002602 ("drm/i915/ehl: Enable DDI-D")
Cc José Roberto de Souza <[email protected]>
Cc Lucas De Marchi <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +4 -6
index ddf5bad1b969..59c5fd7bf27d 100644
@@ -5477,14 +5477,12 @@ static bool bxt_digital_port_connected(struct intel_encoder *encoder)
 }
 
 static bool icl_combo_port_connected(struct drm_i915_private *dev_priv,
-				     struct intel_digital_port *intel_dig_port)
+				     enum phy phy)
 {
-	enum port port = intel_dig_port->base.port;
-
-	if (HAS_PCH_MCC(dev_priv) && port == PORT_C)
+	if (HAS_PCH_MCC(dev_priv) && phy == PHY_C)
 		return I915_READ(SDEISR) & SDE_TC_HOTPLUG_ICP(PORT_TC1);
 
-	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(port);
+	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(phy);
 }
 
 static bool icp_digital_port_connected(struct intel_encoder *encoder)
@@ -5494,7 +5492,7 @@ static bool icp_digital_port_connected(struct intel_encoder *encoder)
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 
 	if (intel_phy_is_combo(dev_priv, phy))
-		return icl_combo_port_connected(dev_priv, dig_port);
+		return icl_combo_port_connected(dev_priv, phy);
 	else if (intel_phy_is_tc(dev_priv, phy))
 		return intel_tc_port_connected(dig_port);
 	else
Signature · 6 lines
2.23.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 2/3
#2 lore raw

Re: [PATCH 2/3] drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port

Quoted 9 lines · Matt Roper

When looking at SDEISR to determine the connection status of combo outputs, we should use the phy index rather than the port index. Although they're usually the same thing, EHL's DDI-D (port D) is attached to PHY-A and SDEISR doesn't even have bits for a "D" output. It's also possible that future platforms may map DDIs (the internal display engine programming units) to PHYs (the output handling on the IO
side) in ways where port!=phy, so let's look at the PHY index by default.

Quoted 46 lines
Fixes 719d24002602 ("drm/i915/ehl: Enable DDI-D")
Cc José Roberto de Souza <[email protected]>
Cc Lucas De Marchi <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +3 -5
index ddf5bad1b969..59c5fd7bf27d 100644
@@ -5477,14 +5477,12 @@ static bool bxt_digital_port_connected(struct
 intel_encoder *encoder)
 }
 
 static bool icl_combo_port_connected(struct drm_i915_private
 *dev_priv,
-				     struct intel_digital_port
 *intel_dig_port)
+				     enum phy phy)
 {
-	enum port port = intel_dig_port->base.port;
-
-	if (HAS_PCH_MCC(dev_priv) && port == PORT_C)
+	if (HAS_PCH_MCC(dev_priv) && phy == PHY_C)
 		return I915_READ(SDEISR) &
 SDE_TC_HOTPLUG_ICP(PORT_TC1);
 
-	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(port);
+	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(phy);
 }
 
 static bool icp_digital_port_connected(struct intel_encoder

*encoder)

drivers/gpu/drm/i915/display/intel_dp.c +1 -1
@@ -5494,7 +5492,7 @@ static bool icp_digital_port_connected(struct
 intel_encoder *encoder)
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 
 	if (intel_phy_is_combo(dev_priv, phy))
-		return icl_combo_port_connected(dev_priv, dig_port);
+		return icl_combo_port_connected(dev_priv, phy);
 	else if (intel_phy_is_tc(dev_priv, phy))
 		return intel_tc_port_connected(dig_port);
Quoted 1 line

else

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v1 2/3
#3 lore raw

Re: [PATCH 2/3] drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port

In reply to Matt Roper
Quoted 22 lines · Matt Roper

When looking at SDEISR to determine the connection status of combo outputs, we should use the phy index rather than the port index. Although they're usually the same thing, EHL's DDI-D (port D) is attached to PHY-A and SDEISR doesn't even have bits for a "D" output. It's also possible that future platforms may map DDIs (the internal display engine programming units) to PHYs (the output handling on the IO side) in ways where port!=phy, so let's look at the PHY index by default.

Fixes 719d24002602 ("drm/i915/ehl: Enable DDI-D")
Cc José Roberto de Souza <[email protected]>
Cc Lucas De Marchi <[email protected]>

---
drivers/gpu/drm/i915/display/intel_dp.c | 10 ++++------

1 file changed, 4 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +0 -0
index ddf5bad1b969..59c5fd7bf27d 100644

drivers/gpu/drm/i915/display/intel_dp.c static bool bxt_digital_port_connected(struct intel_encoder *encoder) · line 5479

Quoted 3 lines
drivers/gpu/drm/i915/display/intel_dp.c +0 -0
@@ -5477,14 +5477,12 @@ static bool bxt_digital_port_connected(struct intel_encoder *encoder)
 }
 
 static bool icl_combo_port_connected(struct drm_i915_private *dev_priv,

while at it I think it would make more sense to call this icl_combo_phy_connected() and maybe even intel_combo_phy_connected()

Lucas De Marchi

Quoted 30 lines
drivers/gpu/drm/i915/display/intel_dp.c +4 -6
-				     struct intel_digital_port *intel_dig_port)
+				     enum phy phy)
 {
-	enum port port = intel_dig_port->base.port;
-
-	if (HAS_PCH_MCC(dev_priv) && port == PORT_C)
+	if (HAS_PCH_MCC(dev_priv) && phy == PHY_C)
 		return I915_READ(SDEISR) & SDE_TC_HOTPLUG_ICP(PORT_TC1);
 
-	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(port);
+	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(phy);
 }
 
 static bool icp_digital_port_connected(struct intel_encoder *encoder)
@@ -5494,7 +5492,7 @@ static bool icp_digital_port_connected(struct intel_encoder *encoder)
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 
 	if (intel_phy_is_combo(dev_priv, phy))
-		return icl_combo_port_connected(dev_priv, dig_port);
+		return icl_combo_port_connected(dev_priv, phy);
 	else if (intel_phy_is_tc(dev_priv, phy))
 		return intel_tc_port_connected(dig_port);
 	else
Signature · 6 lines
2.23.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#4 lore raw

PATCH 3/3 drm/i915: Program SHPD_FILTER_CNT on CNP+

In reply to Matt Roper

The bspec tells us 'Program SHPD_FILTER_CNT with the "500 microseconds adjusted" value before enabling hotplug detection' on CNP+. We haven't been touching this register at all thus far, but we should probably follow the bspec's guidance.

The register also exists on LPT and SPT, but there isn't any specific guidance I can find on how we should be programming it there so let's leave it be for now.

Bspec: 4342
Bspec: 31297
Bspec: 8407
Bspec: 49305
Bspec: 50473

---
 drivers/gpu/drm/i915/i915_irq.c | 5 +++++
 drivers/gpu/drm/i915/i915_reg.h | 4 ++++
 2 files changed, 9 insertions(+)
drivers/gpu/drm/i915/i915_irq.c +5 -0
index dae00f7dd7df..028cb6239c12 100644
@@ -2976,6 +2976,8 @@ static void icp_hpd_irq_setup(struct drm_i915_private *dev_priv,
 	hotplug_irqs = sde_ddi_mask | sde_tc_mask;
 	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, pins);
 
+	I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
+
 	ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs);
 
 	icp_hpd_detection_setup(dev_priv, ddi_enable_mask, tc_enable_mask);
@@ -3081,6 +3083,9 @@ static void spt_hpd_irq_setup(struct drm_i915_private *dev_priv)
 {
 	u32 hotplug_irqs, enabled_irqs;
 
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
+		I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
+
 	hotplug_irqs = SDE_HOTPLUG_MASK_SPT;
 	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_spt);
 
drivers/gpu/drm/i915/i915_reg.h +4 -0
index 94d0f593eeb7..74cf45de162e 100644
@@ -8110,6 +8110,10 @@ enum {
 
 #define SHOTPLUG_CTL_TC				_MMIO(0xc4034)
 #define   ICP_TC_HPD_ENABLE(tc_port)		(8 << (tc_port) * 4)
+
+#define SHPD_FILTER_CNT				_MMIO(0xc4038)
+#define   SHPD_FILTER_CNT_500_ADJ		0x001D9
+
 /* Icelake DSC Rate Control Range Parameter Registers */
 #define DSCA_RC_RANGE_PARAMETERS_0		_MMIO(0x6B240)
 #define DSCA_RC_RANGE_PARAMETERS_0_UDW		_MMIO(0x6B240 + 4)
Signature · 6 lines
2.23.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Re: [PATCH 3/3] drm/i915: Program SHPD_FILTER_CNT on CNP+

Quoted 57 lines · Matt Roper

The bspec tells us 'Program SHPD_FILTER_CNT with the "500 microseconds
adjusted" value before enabling hotplug detection' on CNP+. We haven't
been touching this register at all thus far, but we should probably follow the bspec's guidance.

The register also exists on LPT and SPT, but there isn't any specific guidance I can find on how we should be programming it there so let's leave it be for now.

Bspec: 4342
Bspec: 31297
Bspec: 8407
Bspec: 49305
Bspec: 50473

---
 drivers/gpu/drm/i915/i915_irq.c | 5 +++++
 drivers/gpu/drm/i915/i915_reg.h | 4 ++++
 2 files changed, 9 insertions(+)
drivers/gpu/drm/i915/i915_irq.c +2 -0
index dae00f7dd7df..028cb6239c12 100644
@@ -2976,6 +2976,8 @@ static void icp_hpd_irq_setup(struct
 drm_i915_private *dev_priv,
 	hotplug_irqs = sde_ddi_mask | sde_tc_mask;
 	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, pins);
 
+	I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
+
 	ibx_display_interrupt_update(dev_priv, hotplug_irqs,
 enabled_irqs);

icp_hpd_detection_setup(dev_priv, ddi_enable_mask,
tc_enable_mask);

drivers/gpu/drm/i915/i915_irq.c +3 -0
@@ -3081,6 +3083,9 @@ static void spt_hpd_irq_setup(struct
 drm_i915_private *dev_priv)
 {
 	u32 hotplug_irqs, enabled_irqs;
 
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
+		I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
+
 	hotplug_irqs = SDE_HOTPLUG_MASK_SPT;
 	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_spt);
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 94d0f593eeb7..74cf45de162e 100644

drivers/gpu/drm/i915/i915_reg.h enum { · line 8115

Quoted 6 lines
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -8110,6 +8110,10 @@ enum {
 
 #define SHOTPLUG_CTL_TC				_MMIO(0xc4034)
 #define   ICP_TC_HPD_ENABLE(tc_port)		(8 << (tc_port) * 4)
+
+#define SHPD_FILTER_CNT				_MMIO(0xc4038)
+#define   SHPD_FILTER_CNT_500_ADJ		0x001D9

Shouldn't it be 0x1F2? Or I'm missing something?
Also this is the default value.

Quoted 5 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
+
 /* Icelake DSC Rate Control Range Parameter Registers */
 #define DSCA_RC_RANGE_PARAMETERS_0		_MMIO(0x6B240)
 #define DSCA_RC_RANGE_PARAMETERS_0_UDW		_MMIO(0x6B240 +

4)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#6 lore raw

Re: [PATCH 3/3] drm/i915: Program SHPD_FILTER_CNT on CNP+

Quoted 59 lines · Jose
Quoted 58 lines · Matt Roper

The bspec tells us 'Program SHPD_FILTER_CNT with the "500 microseconds
adjusted" value before enabling hotplug detection' on CNP+. We haven't
been touching this register at all thus far, but we should probably follow the bspec's guidance.

The register also exists on LPT and SPT, but there isn't any specific guidance I can find on how we should be programming it there so let's leave it be for now.

Bspec: 4342
Bspec: 31297
Bspec: 8407
Bspec: 49305
Bspec: 50473

---
 drivers/gpu/drm/i915/i915_irq.c | 5 +++++
 drivers/gpu/drm/i915/i915_reg.h | 4 ++++
 2 files changed, 9 insertions(+)
drivers/gpu/drm/i915/i915_irq.c +2 -0
index dae00f7dd7df..028cb6239c12 100644
@@ -2976,6 +2976,8 @@ static void icp_hpd_irq_setup(struct
 drm_i915_private *dev_priv,
 	hotplug_irqs = sde_ddi_mask | sde_tc_mask;
 	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, pins);
 
+	I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
+
 	ibx_display_interrupt_update(dev_priv, hotplug_irqs,
 enabled_irqs);

icp_hpd_detection_setup(dev_priv, ddi_enable_mask,
tc_enable_mask);

drivers/gpu/drm/i915/i915_irq.c +3 -0
@@ -3081,6 +3083,9 @@ static void spt_hpd_irq_setup(struct
 drm_i915_private *dev_priv)
 {
 	u32 hotplug_irqs, enabled_irqs;
 
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
+		I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
+
 	hotplug_irqs = SDE_HOTPLUG_MASK_SPT;
 	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_spt);
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 94d0f593eeb7..74cf45de162e 100644
@@ -8110,6 +8110,10 @@ enum {
 
Quoted 9 lines

drivers/gpu/drm/i915/i915_reg.h enum { · line 8115

Quoted 5 lines
drivers/gpu/drm/i915/i915_reg.h +3 -0
 #define SHOTPLUG_CTL_TC				_MMIO(0xc4034)
 #define   ICP_TC_HPD_ENABLE(tc_port)		(8 << (tc_port) * 4)
+
+#define SHPD_FILTER_CNT				_MMIO(0xc4038)
+#define   SHPD_FILTER_CNT_500_ADJ		0x001D9

Shouldn't it be 0x1F2? Or I'm missing something?
Also this is the default value.

0x1F2 is the "500 microseconds" option, whereas 0x1D9 is the "500 microseconds adjusted" option according to bspec 8407/50473. The programming instructions tell us to use the non-default "adjusted" variant.

I'm not sure why they don't just call it "475 microseconds" since that's what this value really works out to...

Matt

Quoted 6 lines
Quoted 6 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
+
 /* Icelake DSC Rate Control Range Parameter Registers */
 #define DSCA_RC_RANGE_PARAMETERS_0		_MMIO(0x6B240)
 #define DSCA_RC_RANGE_PARAMETERS_0_UDW		_MMIO(0x6B240 +

4)

Signature · 9 lines
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by
#7 lore raw

Re: [PATCH 3/3] drm/i915: Program SHPD_FILTER_CNT on CNP+

Quoted 74 lines · Matt Roper
Quoted 62 lines · Jose
Quoted 61 lines · Matt Roper

The bspec tells us 'Program SHPD_FILTER_CNT with the "500 microseconds
adjusted" value before enabling hotplug detection' on CNP+. We haven't
been touching this register at all thus far, but we should probably
follow the bspec's guidance.

The register also exists on LPT and SPT, but there isn't any specific
guidance I can find on how we should be programming it there so let's
leave it be for now.

Bspec: 4342
Bspec: 31297
Bspec: 8407
Bspec: 49305
Bspec: 50473

---
 drivers/gpu/drm/i915/i915_irq.c | 5 +++++
 drivers/gpu/drm/i915/i915_reg.h | 4 ++++
 2 files changed, 9 insertions(+)
drivers/gpu/drm/i915/i915_irq.c +2 -0
index dae00f7dd7df..028cb6239c12 100644
@@ -2976,6 +2976,8 @@ static void icp_hpd_irq_setup(struct
 drm_i915_private *dev_priv,
 	hotplug_irqs = sde_ddi_mask | sde_tc_mask;
 	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, pins);
 
+	I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
+
 	ibx_display_interrupt_update(dev_priv, hotplug_irqs,
 enabled_irqs);

icp_hpd_detection_setup(dev_priv, ddi_enable_mask,
tc_enable_mask);

drivers/gpu/drm/i915/i915_irq.c +3 -0
@@ -3081,6 +3083,9 @@ static void spt_hpd_irq_setup(struct
 drm_i915_private *dev_priv)
 {
 	u32 hotplug_irqs, enabled_irqs;
 
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
+		I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
+
 	hotplug_irqs = SDE_HOTPLUG_MASK_SPT;
 	enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_spt);
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 94d0f593eeb7..74cf45de162e 100644
@@ -8110,6 +8110,10 @@ enum {
 
Quoted 10 lines

drivers/gpu/drm/i915/i915_reg.h enum { · line 8115

Quoted 6 lines
drivers/gpu/drm/i915/i915_reg.h +3 -0
 #define SHOTPLUG_CTL_TC				_MMIO(0xc4034)
 #define   ICP_TC_HPD_ENABLE(tc_port)		(8 << (tc_port)
 * 4)
+
+#define SHPD_FILTER_CNT				_MMIO(0xc4038)
+#define   SHPD_FILTER_CNT_500_ADJ		0x001D9

Shouldn't it be 0x1F2? Or I'm missing something?
Also this is the default value.

Quoted 8 lines

0x1F2 is the "500 microseconds" option, whereas 0x1D9 is the "500 microseconds adjusted" option according to bspec 8407/50473. The programming instructions tell us to use the non-default "adjusted" variant.

I'm not sure why they don't just call it "475 microseconds" since that's
what this value really works out to...

Oooh

"Adjusted" smells like a workaround value

Anyways:

Quoted 9 lines

Matt

Quoted 5 lines
Quoted 5 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
+
 /* Icelake DSC Rate Control Range Parameter Registers */
 #define DSCA_RC_RANGE_PARAMETERS_0		_MMIO(0x6B240)

#define DSCA_RC_RANGE_PARAMETERS_0_UDW _MMIO(0x6B240 +
4)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v1 1/3
#8 lore raw
In reply to Matt Roper
Quoted 4 lines · Matt Roper

The South Display is part of the PCH so we should technically be basing
our port detection logic off the PCH in use rather than the platform generation.

Quoted 38 lines
Cc Lucas De Marchi <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +1 -1
index 3123958e2081..ddf5bad1b969 100644
@@ -5487,7 +5487,7 @@ static bool icl_combo_port_connected(struct
 drm_i915_private *dev_priv,
 	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(port);
 }
 
-static bool icl_digital_port_connected(struct intel_encoder
 *encoder)
+static bool icp_digital_port_connected(struct intel_encoder
 *encoder)

{

drivers/gpu/drm/i915/display/intel_dp.c +0 -0
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder-
Quoted 1 line

base);

drivers/gpu/drm/i915/display/intel_dp.c +3 -3
@@ -5525,9 +5525,9 @@ static bool
 __intel_digital_port_connected(struct intel_encoder *encoder)
 			return g4x_digital_port_connected(encoder);
 	}
 
-	if (INTEL_GEN(dev_priv) >= 11)
-		return icl_digital_port_connected(encoder);
-	else if (IS_GEN(dev_priv, 10) || IS_GEN9_BC(dev_priv))
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
+		return icp_digital_port_connected(encoder);
+	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_SPT)
 		return spt_digital_port_connected(encoder);
 	else if (IS_GEN9_LP(dev_priv))
Quoted 1 line

return bxt_digital_port_connected(encoder);

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform
URL : https://patchwork.freedesktop.org/series/70073/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_7426 -> Patchwork_15447
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_15447 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_15447, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_15447:

### IGT changes ###

#### Possible regressions ####

* igt@i915_selftest@live_gem_contexts:
- fi-skl-6770hq: [PASS][1] -> [DMESG-FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-skl-6770hq/igt@i915_selftest@live_gem_contexts.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-skl-6770hq/igt@i915_selftest@live_gem_contexts.html

Known issues
------------

Here are the changes found in Patchwork_15447 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [PASS][3] -> [FAIL][4] ([fdo#111045] / [fdo#111096])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-kbl-7500u/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-kbl-7500u/igt@[email protected]

#### Possible fixes ####

* igt@i915_selftest@live_gem_contexts:
- fi-skl-lmem: [DMESG-FAIL][5] -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-skl-lmem/igt@i915_selftest@live_gem_contexts.html
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-skl-lmem/igt@i915_selftest@live_gem_contexts.html

#### Warnings ####

* igt@gem_exec_suspend@basic-s4-devices:
- fi-kbl-x1275: [DMESG-WARN][7] ([fdo#103558] / [fdo#105602] / [fdo#105763] / [fdo#107139]) -> [DMESG-WARN][8] ([fdo#103558] / [fdo#105602] / [fdo#107139])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-kbl-x1275/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-kbl-x1275/igt@[email protected]

* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- fi-kbl-x1275: [DMESG-WARN][9] ([fdo#103558] / [fdo#105602] / [fdo#105763]) -> [DMESG-WARN][10] ([fdo#103558] / [fdo#105602]) +5 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-kbl-x1275/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-kbl-x1275/igt@[email protected]

* igt@kms_cursor_legacy@basic-flip-after-cursor-atomic:
- fi-kbl-x1275: [DMESG-WARN][11] ([fdo#103558] / [fdo#105602]) -> [DMESG-WARN][12] ([fdo#103558] / [fdo#105602] / [fdo#105763]) +4 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-kbl-x1275/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-kbl-x1275/igt@[email protected]

[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#107139]: https://bugs.freedesktop.org/show_bug.cgi?id=107139
[fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
[fdo#111096]: https://bugs.freedesktop.org/show_bug.cgi?id=111096

Participating hosts (49 -> 45)
------------------------------

Additional (2): fi-hsw-4770r fi-whl-u
Missing (6): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* Linux: CI_DRM_7426 -> Patchwork_15447

CI-20190529: 20190529
CI_DRM_7426: b204d72d3485a148456e2077683974739b675b21 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5310: d1ea62b3f759f10ff6860561ba82e5c4902511d3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_15447: 86c94d0000b657e7adda0a615e7264c25e158e3b @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

86c94d0000b6 drm/i915: Program SHPD_FILTER_CNT on CNP+
4fe5a19ba44a drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port 2e5ac97c5e02 drm/i915: Handle SDEISR according to PCH rather than platform

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#10 lore raw

Re: ✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform

Quoted 30 lines · Patchwork

== Series Details ==

Series: series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform
URL : https://patchwork.freedesktop.org/series/70073/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_7426 -> Patchwork_15447
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_15447 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_15447, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_15447:

Quoted 8 lines

### IGT changes ###

#### Possible regressions ####

* igt@i915_selftest@live_gem_contexts:
- fi-skl-6770hq: [PASS][1] -> [DMESG-FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-skl-6770hq/igt@i915_selftest@live_gem_contexts.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-skl-6770hq/igt@i915_selftest@live_gem_contexts.html

GEM self-test failed:

        <3>[  480.076214] idle: Failed with -11!
        <3>[  480.090075] i915/i915_gem_context_live_selftests: igt_ctx_sseu failed with error -11

Not related to this series; hitting the re-test button.

Matt

Quoted 79 lines

Known issues
------------

Here are the changes found in Patchwork_15447 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [PASS][3] -> [FAIL][4] ([fdo#111045] / [fdo#111096])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-kbl-7500u/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-kbl-7500u/igt@[email protected]

#### Possible fixes ####

* igt@i915_selftest@live_gem_contexts:
- fi-skl-lmem: [DMESG-FAIL][5] -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-skl-lmem/igt@i915_selftest@live_gem_contexts.html
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-skl-lmem/igt@i915_selftest@live_gem_contexts.html

#### Warnings ####

* igt@gem_exec_suspend@basic-s4-devices:
- fi-kbl-x1275: [DMESG-WARN][7] ([fdo#103558] / [fdo#105602] / [fdo#105763] / [fdo#107139]) -> [DMESG-WARN][8] ([fdo#103558] / [fdo#105602] / [fdo#107139])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-kbl-x1275/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-kbl-x1275/igt@[email protected]

* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- fi-kbl-x1275: [DMESG-WARN][9] ([fdo#103558] / [fdo#105602] / [fdo#105763]) -> [DMESG-WARN][10] ([fdo#103558] / [fdo#105602]) +5 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-kbl-x1275/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-kbl-x1275/igt@[email protected]

* igt@kms_cursor_legacy@basic-flip-after-cursor-atomic:
- fi-kbl-x1275: [DMESG-WARN][11] ([fdo#103558] / [fdo#105602]) -> [DMESG-WARN][12] ([fdo#103558] / [fdo#105602] / [fdo#105763]) +4 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7426/fi-kbl-x1275/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/fi-kbl-x1275/igt@[email protected]

[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#107139]: https://bugs.freedesktop.org/show_bug.cgi?id=107139
[fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
[fdo#111096]: https://bugs.freedesktop.org/show_bug.cgi?id=111096

Participating hosts (49 -> 45)
------------------------------

Additional (2): fi-hsw-4770r fi-whl-u
Missing (6): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* Linux: CI_DRM_7426 -> Patchwork_15447

CI-20190529: 20190529
CI_DRM_7426: b204d72d3485a148456e2077683974739b675b21 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5310: d1ea62b3f759f10ff6860561ba82e5c4902511d3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_15447: 86c94d0000b657e7adda0a615e7264c25e158e3b @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

86c94d0000b6 drm/i915: Program SHPD_FILTER_CNT on CNP+
4fe5a19ba44a drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port 2e5ac97c5e02 drm/i915: Handle SDEISR according to PCH rather than platform

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15447/index.html

Signature · 9 lines
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#11 lore raw

✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform (rev2)

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform (rev2)
URL : https://patchwork.freedesktop.org/series/70073/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_7428 -> Patchwork_15452
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_15452 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_15452, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_15452:

### IGT changes ###

#### Possible regressions ####

* igt@i915_selftest@live_gem_contexts:
- fi-skl-6770hq: [PASS][1] -> [DMESG-FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-skl-6770hq/igt@i915_selftest@live_gem_contexts.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-skl-6770hq/igt@i915_selftest@live_gem_contexts.html

Known issues
------------

Here are the changes found in Patchwork_15452 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_suspend@basic-s3:
- fi-icl-y: [PASS][3] -> [INCOMPLETE][4] ([fdo#107713])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-icl-y/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-icl-y/igt@[email protected]

* igt@i915_module_load@reload-with-fault-injection:
- fi-skl-6770hq: [PASS][5] -> [DMESG-WARN][6] ([fdo#105541])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-skl-6770hq/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-skl-6770hq/igt@[email protected]

* igt@i915_selftest@live_gem_contexts:
- fi-skl-lmem: [PASS][7] -> [INCOMPLETE][8] ([fdo#111700])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-skl-lmem/igt@i915_selftest@live_gem_contexts.html
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-skl-lmem/igt@i915_selftest@live_gem_contexts.html

#### Possible fixes ####

* igt@i915_module_load@reload-with-fault-injection:
- {fi-kbl-7560u}: [INCOMPLETE][9] ([fdo#109964] / [fdo#112298]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-7560u/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-kbl-7560u/igt@[email protected]

* igt@i915_selftest@live_blt:
- fi-bsw-n3050: [DMESG-FAIL][11] ([fdo#112176]) -> [PASS][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-bsw-n3050/igt@i915_selftest@live_blt.html
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-bsw-n3050/igt@i915_selftest@live_blt.html
- fi-hsw-peppy: [DMESG-FAIL][13] ([fdo#112147]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-hsw-peppy/igt@i915_selftest@live_blt.html
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-hsw-peppy/igt@i915_selftest@live_blt.html

* igt@i915_selftest@live_execlists:
- fi-glk-dsi: [DMESG-FAIL][15] -> [PASS][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-glk-dsi/igt@i915_selftest@live_execlists.html
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-glk-dsi/igt@i915_selftest@live_execlists.html

* igt@kms_busy@basic-flip-pipe-a:
- fi-icl-u2: [TIMEOUT][17] ([fdo#111800]) -> [PASS][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-icl-u2/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-icl-u2/igt@[email protected]

#### Warnings ####

* igt@kms_busy@basic-flip-pipe-b:
- fi-kbl-x1275: [DMESG-WARN][19] ([fdo#103558] / [fdo#105602]) -> [DMESG-WARN][20] ([fdo#103558] / [fdo#105602] / [fdo#105763]) +6 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-x1275/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-kbl-x1275/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [FAIL][21] ([fdo#111045] / [fdo#111096]) -> [FAIL][22] ([fdo#111407])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-7500u/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-kbl-7500u/igt@[email protected]

* igt@kms_pipe_crc_basic@read-crc-pipe-a:
- fi-kbl-x1275: [DMESG-WARN][23] ([fdo#103558] / [fdo#105602] / [fdo#105763]) -> [DMESG-WARN][24] ([fdo#103558] / [fdo#105602]) +3 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-x1275/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/fi-kbl-x1275/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#105541]: https://bugs.freedesktop.org/show_bug.cgi?id=105541
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#109964]: https://bugs.freedesktop.org/show_bug.cgi?id=109964
[fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
[fdo#111096]: https://bugs.freedesktop.org/show_bug.cgi?id=111096
[fdo#111407]: https://bugs.freedesktop.org/show_bug.cgi?id=111407
[fdo#111700]: https://bugs.freedesktop.org/show_bug.cgi?id=111700
[fdo#111800]: https://bugs.freedesktop.org/show_bug.cgi?id=111800
[fdo#112147]: https://bugs.freedesktop.org/show_bug.cgi?id=112147
[fdo#112176]: https://bugs.freedesktop.org/show_bug.cgi?id=112176
[fdo#112298]: https://bugs.freedesktop.org/show_bug.cgi?id=112298

Participating hosts (51 -> 45)
------------------------------

Missing (6): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* Linux: CI_DRM_7428 -> Patchwork_15452

CI-20190529: 20190529
CI_DRM_7428: d90242799e46210c5c09e1f0c64db2bb7ee870c6 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5310: d1ea62b3f759f10ff6860561ba82e5c4902511d3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_15452: 3937a13811ec4c713926fd4ed302292e53e4a86e @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

3937a13811ec drm/i915: Program SHPD_FILTER_CNT on CNP+
09130f2d60e6 drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port 061f4770dcee drm/i915: Handle SDEISR according to PCH rather than platform

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15452/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#12 lore raw

✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform (rev3)

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform (rev3)
URL : https://patchwork.freedesktop.org/series/70073/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_7428 -> Patchwork_15455
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_15455 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_15455, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_15455:

### IGT changes ###

#### Possible regressions ####

* igt@i915_selftest@live_execlists:
- fi-cfl-8700k: [PASS][1] -> [DMESG-FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-cfl-8700k/igt@i915_selftest@live_execlists.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-cfl-8700k/igt@i915_selftest@live_execlists.html

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@i915_selftest@live_active:
- {fi-kbl-7560u}: NOTRUN -> [DMESG-FAIL][3]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-7560u/igt@i915_selftest@live_active.html

Known issues
------------

Here are the changes found in Patchwork_15455 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@i915_pm_rpm@module-reload:
- fi-skl-lmem: [PASS][4] -> [DMESG-WARN][5] ([fdo#112261])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-skl-lmem/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-skl-lmem/igt@[email protected]

#### Possible fixes ####

* igt@i915_module_load@reload-with-fault-injection:
- {fi-kbl-7560u}: [INCOMPLETE][6] ([fdo#109964] / [fdo#112298]) -> [PASS][7]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-7560u/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-7560u/igt@[email protected]

* igt@i915_selftest@live_blt:
- fi-bsw-n3050: [DMESG-FAIL][8] ([fdo#112176]) -> [PASS][9]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-bsw-n3050/igt@i915_selftest@live_blt.html
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-bsw-n3050/igt@i915_selftest@live_blt.html
- fi-hsw-peppy: [DMESG-FAIL][10] ([fdo#112147]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-hsw-peppy/igt@i915_selftest@live_blt.html
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-hsw-peppy/igt@i915_selftest@live_blt.html

* igt@i915_selftest@live_execlists:
- fi-glk-dsi: [DMESG-FAIL][12] -> [PASS][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-glk-dsi/igt@i915_selftest@live_execlists.html
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-glk-dsi/igt@i915_selftest@live_execlists.html

* igt@kms_busy@basic-flip-pipe-a:
- fi-icl-u2: [TIMEOUT][14] ([fdo#111800]) -> [PASS][15]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-icl-u2/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-icl-u2/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [FAIL][16] ([fdo#111045] / [fdo#111096]) -> [PASS][17]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-7500u/igt@[email protected]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-7500u/igt@[email protected]

#### Warnings ####

* igt@gem_exec_suspend@basic-s4-devices:
- fi-kbl-x1275: [DMESG-WARN][18] ([fdo#103558] / [fdo#105602] / [fdo#105763] / [fdo#107139]) -> [DMESG-WARN][19] ([fdo#103558] / [fdo#105602] / [fdo#107139])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-x1275/igt@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-x1275/igt@[email protected]

* igt@kms_flip@basic-flip-vs-modeset:
- fi-kbl-x1275: [DMESG-WARN][20] ([fdo#103558] / [fdo#105602]) -> [DMESG-WARN][21] ([fdo#103558] / [fdo#105602] / [fdo#105763]) +8 similar issues
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-x1275/igt@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-x1275/igt@[email protected]

* igt@kms_pipe_crc_basic@hang-read-crc-pipe-a:
- fi-kbl-x1275: [DMESG-WARN][22] ([fdo#103558] / [fdo#105602] / [fdo#105763]) -> [DMESG-WARN][23] ([fdo#103558] / [fdo#105602]) +6 similar issues
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-x1275/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-x1275/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#107139]: https://bugs.freedesktop.org/show_bug.cgi?id=107139
[fdo#109964]: https://bugs.freedesktop.org/show_bug.cgi?id=109964
[fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
[fdo#111096]: https://bugs.freedesktop.org/show_bug.cgi?id=111096
[fdo#111800]: https://bugs.freedesktop.org/show_bug.cgi?id=111800
[fdo#112147]: https://bugs.freedesktop.org/show_bug.cgi?id=112147
[fdo#112176]: https://bugs.freedesktop.org/show_bug.cgi?id=112176
[fdo#112261]: https://bugs.freedesktop.org/show_bug.cgi?id=112261
[fdo#112298]: https://bugs.freedesktop.org/show_bug.cgi?id=112298

Participating hosts (51 -> 45)
------------------------------

Missing (6): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* Linux: CI_DRM_7428 -> Patchwork_15455

CI-20190529: 20190529
CI_DRM_7428: d90242799e46210c5c09e1f0c64db2bb7ee870c6 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5310: d1ea62b3f759f10ff6860561ba82e5c4902511d3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_15455: d383fec4b9be3418b6ec33147c212276c2340407 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

d383fec4b9be drm/i915: Program SHPD_FILTER_CNT on CNP+
51dee6a357d0 drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port d2f45eb90da9 drm/i915: Handle SDEISR according to PCH rather than platform

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#13 lore raw

Re: ✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform (rev3)

Quoted 30 lines · Patchwork

== Series Details ==

Series: series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform (rev3)
URL : https://patchwork.freedesktop.org/series/70073/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_7428 -> Patchwork_15455
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_15455 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_15455, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_15455:

Quoted 8 lines

### IGT changes ###

#### Possible regressions ####

* igt@i915_selftest@live_execlists:
- fi-cfl-8700k: [PASS][1] -> [DMESG-FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-cfl-8700k/igt@i915_selftest@live_execlists.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-cfl-8700k/igt@i915_selftest@live_execlists.html

[  456.989562] i915/intel_execlists_live_selftests: live_preempt_hang failed with error -5

Another GEM failure that isn't related to the test. Hitting re-test yet again.

Matt

Quoted 120 lines

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@i915_selftest@live_active:
- {fi-kbl-7560u}: NOTRUN -> [DMESG-FAIL][3]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-7560u/igt@i915_selftest@live_active.html

Known issues
------------

Here are the changes found in Patchwork_15455 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@i915_pm_rpm@module-reload:
- fi-skl-lmem: [PASS][4] -> [DMESG-WARN][5] ([fdo#112261])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-skl-lmem/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-skl-lmem/igt@[email protected]

#### Possible fixes ####

* igt@i915_module_load@reload-with-fault-injection:
- {fi-kbl-7560u}: [INCOMPLETE][6] ([fdo#109964] / [fdo#112298]) -> [PASS][7]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-7560u/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-7560u/igt@[email protected]

* igt@i915_selftest@live_blt:
- fi-bsw-n3050: [DMESG-FAIL][8] ([fdo#112176]) -> [PASS][9]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-bsw-n3050/igt@i915_selftest@live_blt.html
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-bsw-n3050/igt@i915_selftest@live_blt.html
- fi-hsw-peppy: [DMESG-FAIL][10] ([fdo#112147]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-hsw-peppy/igt@i915_selftest@live_blt.html
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-hsw-peppy/igt@i915_selftest@live_blt.html

* igt@i915_selftest@live_execlists:
- fi-glk-dsi: [DMESG-FAIL][12] -> [PASS][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-glk-dsi/igt@i915_selftest@live_execlists.html
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-glk-dsi/igt@i915_selftest@live_execlists.html

* igt@kms_busy@basic-flip-pipe-a:
- fi-icl-u2: [TIMEOUT][14] ([fdo#111800]) -> [PASS][15]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-icl-u2/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-icl-u2/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [FAIL][16] ([fdo#111045] / [fdo#111096]) -> [PASS][17]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-7500u/igt@[email protected]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-7500u/igt@[email protected]

#### Warnings ####

* igt@gem_exec_suspend@basic-s4-devices:
- fi-kbl-x1275: [DMESG-WARN][18] ([fdo#103558] / [fdo#105602] / [fdo#105763] / [fdo#107139]) -> [DMESG-WARN][19] ([fdo#103558] / [fdo#105602] / [fdo#107139])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-x1275/igt@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-x1275/igt@[email protected]

* igt@kms_flip@basic-flip-vs-modeset:
- fi-kbl-x1275: [DMESG-WARN][20] ([fdo#103558] / [fdo#105602]) -> [DMESG-WARN][21] ([fdo#103558] / [fdo#105602] / [fdo#105763]) +8 similar issues
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-x1275/igt@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-x1275/igt@[email protected]

* igt@kms_pipe_crc_basic@hang-read-crc-pipe-a:
- fi-kbl-x1275: [DMESG-WARN][22] ([fdo#103558] / [fdo#105602] / [fdo#105763]) -> [DMESG-WARN][23] ([fdo#103558] / [fdo#105602]) +6 similar issues
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7428/fi-kbl-x1275/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/fi-kbl-x1275/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#107139]: https://bugs.freedesktop.org/show_bug.cgi?id=107139
[fdo#109964]: https://bugs.freedesktop.org/show_bug.cgi?id=109964
[fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
[fdo#111096]: https://bugs.freedesktop.org/show_bug.cgi?id=111096
[fdo#111800]: https://bugs.freedesktop.org/show_bug.cgi?id=111800
[fdo#112147]: https://bugs.freedesktop.org/show_bug.cgi?id=112147
[fdo#112176]: https://bugs.freedesktop.org/show_bug.cgi?id=112176
[fdo#112261]: https://bugs.freedesktop.org/show_bug.cgi?id=112261
[fdo#112298]: https://bugs.freedesktop.org/show_bug.cgi?id=112298

Participating hosts (51 -> 45)
------------------------------

Missing (6): fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* Linux: CI_DRM_7428 -> Patchwork_15455

CI-20190529: 20190529
CI_DRM_7428: d90242799e46210c5c09e1f0c64db2bb7ee870c6 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5310: d1ea62b3f759f10ff6860561ba82e5c4902511d3 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_15455: d383fec4b9be3418b6ec33147c212276c2340407 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

d383fec4b9be drm/i915: Program SHPD_FILTER_CNT on CNP+
51dee6a357d0 drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port d2f45eb90da9 drm/i915: Handle SDEISR according to PCH rather than platform

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15455/index.html

Signature · 9 lines
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 1/3
#14 lore raw
In reply to Matt Roper
Quoted 6 lines · Matt Roper

The South Display is part of the PCH so we should technically be basing our port detection logic off the PCH in use rather than the platform generation.

Cc Lucas De Marchi <[email protected]>

Lucas De Marchi

Quoted 37 lines

---
drivers/gpu/drm/i915/display/intel_dp.c | 8 ++++----

1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +4 -4
index 3123958e2081..ddf5bad1b969 100644
@@ -5487,7 +5487,7 @@ static bool icl_combo_port_connected(struct drm_i915_private *dev_priv,
 	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(port);
 }
 
-static bool icl_digital_port_connected(struct intel_encoder *encoder)
+static bool icp_digital_port_connected(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
@@ -5525,9 +5525,9 @@ static bool __intel_digital_port_connected(struct intel_encoder *encoder)
 			return g4x_digital_port_connected(encoder);
 	}
 
-	if (INTEL_GEN(dev_priv) >= 11)
-		return icl_digital_port_connected(encoder);
-	else if (IS_GEN(dev_priv, 10) || IS_GEN9_BC(dev_priv))
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
+		return icp_digital_port_connected(encoder);
+	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_SPT)
 		return spt_digital_port_connected(encoder);
 	else if (IS_GEN9_LP(dev_priv))
 		return bxt_digital_port_connected(encoder);
Signature · 6 lines
2.23.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#15 lore raw

✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform (rev4)

In reply to Matt Roper
== Series Details ==

== Series Details ==

Series: series starting with [1/3] drm/i915: Handle SDEISR according to PCH rather than platform (rev4)
URL : https://patchwork.freedesktop.org/series/70073/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_7434 -> Patchwork_15471
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_15471 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_15471, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_15471:

### IGT changes ###

#### Possible regressions ####

* igt@i915_selftest@live_gt_heartbeat:
- fi-icl-u3: NOTRUN -> [DMESG-FAIL][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-icl-u3/igt@i915_selftest@live_gt_heartbeat.html

Known issues
------------

Here are the changes found in Patchwork_15471 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_frontbuffer_tracking@basic:
- fi-icl-u3: [PASS][2] -> [FAIL][3] ([fdo#103167])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7434/fi-icl-u3/igt@[email protected]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-icl-u3/igt@[email protected]
- fi-hsw-peppy: [PASS][4] -> [DMESG-WARN][5] ([fdo#102614])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7434/fi-hsw-peppy/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-hsw-peppy/igt@[email protected]

#### Possible fixes ####

* igt@i915_module_load@reload-no-display:
- fi-skl-lmem: [DMESG-WARN][6] ([fdo#112261]) -> [PASS][7]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7434/fi-skl-lmem/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-skl-lmem/igt@[email protected]

* igt@i915_module_load@reload-with-fault-injection:
- fi-icl-u3: [INCOMPLETE][8] ([fdo#107713]) -> [PASS][9]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7434/fi-icl-u3/igt@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-icl-u3/igt@[email protected]

* igt@i915_selftest@live_blt:
- fi-hsw-peppy: [DMESG-FAIL][10] ([fdo#112147]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7434/fi-hsw-peppy/igt@i915_selftest@live_blt.html
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-hsw-peppy/igt@i915_selftest@live_blt.html

#### Warnings ####

* igt@gem_exec_suspend@basic-s4-devices:
- fi-kbl-x1275: [DMESG-WARN][12] ([fdo#103558] / [fdo#105602] / [fdo#107139]) -> [DMESG-WARN][13] ([fdo#103558] / [fdo#105602] / [fdo#105763] / [fdo#107139])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7434/fi-kbl-x1275/igt@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-kbl-x1275/igt@[email protected]

* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: [DMESG-WARN][14] ([fdo#112261]) -> [FAIL][15] ([fdo#108511])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7434/fi-skl-6770hq/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-skl-6770hq/igt@[email protected]

* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- fi-kbl-x1275: [DMESG-WARN][16] ([fdo#103558] / [fdo#105602]) -> [DMESG-WARN][17] ([fdo#103558] / [fdo#105602] / [fdo#105763]) +6 similar issues
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7434/fi-kbl-x1275/igt@[email protected]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-kbl-x1275/igt@[email protected]

* igt@kms_pipe_crc_basic@read-crc-pipe-a:
- fi-kbl-x1275: [DMESG-WARN][18] ([fdo#103558] / [fdo#105602] / [fdo#105763]) -> [DMESG-WARN][19] ([fdo#103558] / [fdo#105602]) +1 similar issue
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7434/fi-kbl-x1275/igt@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/fi-kbl-x1275/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#102614]: https://bugs.freedesktop.org/show_bug.cgi?id=102614
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558
[fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#107139]: https://bugs.freedesktop.org/show_bug.cgi?id=107139
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#109964]: https://bugs.freedesktop.org/show_bug.cgi?id=109964
[fdo#112147]: https://bugs.freedesktop.org/show_bug.cgi?id=112147
[fdo#112261]: https://bugs.freedesktop.org/show_bug.cgi?id=112261
[fdo#112298]: https://bugs.freedesktop.org/show_bug.cgi?id=112298

Participating hosts (52 -> 45)
------------------------------

Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* Linux: CI_DRM_7434 -> Patchwork_15471

CI-20190529: 20190529
CI_DRM_7434: 1bbc4d30ca9fd950cbcb73f324e00d0bc357758e @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5312: 851c75531043cd906e028632b64b02b9312e9945 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_15471: 9638e9227864de0dbb086a7c2225a398e589c499 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

9638e9227864 drm/i915: Program SHPD_FILTER_CNT on CNP+
97f9c9ff7ab5 drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port a9b96f566cc1 drm/i915: Handle SDEISR according to PCH rather than platform

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15471/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx