exception cleanup, syscall in C and !COMPAT
Subsystems (4)
v2 cover exception cleanup, syscall in C and !COMPAT
Hello,
This is merge of https://patchwork.ozlabs.org/cover/1162376/ (except two last experimental patches) and
https://patchwork.ozlabs.org/patch/1162079/ rebased on top of master.
There was minor conflict in Makefile in the latter series.
Refreshed the patchset to fix build error on ppc32 and ppc64e.
Thanks
Michal
Michal Suchanek (10):
powerpc/64: system call: Fix sparse warning about missing declaration
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc: move common register copy functions from signal_32.c to
signal.c
powerpc/perf: remove current_is_64bit()
powerpc/perf: consolidate read_user_stack_32
powerpc/perf: consolidate valid_user_sp
powerpc/64: make buildable without CONFIG_COMPAT powerpc/64: Make COMPAT user-selectable disabled on littleendian by
default.
powerpc/perf: split callchain.c by bitness
MAINTAINERS: perf: Add pattern that matches ppc perf to the perf
entry.
Nicholas Piggin (25):
powerpc/64s/exception: Introduce INT_DEFINE parameter block for code
generation
powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE
parameters
powerpc/64s/exception: Add GEN_KVM macro that uses INT_DEFINE
parameters
powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros powerpc/64s/exception: Move all interrupt handlers to new style code
gen macros
powerpc/64s/exception: Remove old INT_ENTRY macro powerpc/64s/exception: Remove old INT_COMMON macro powerpc/64s/exception: Remove old INT_KVM_HANDLER powerpc/64s/exception: Add ISIDE option powerpc/64s/exception: move real->virt switch into the common handler powerpc/64s/exception: move soft-mask test to common code powerpc/64s/exception: move KVM test to common code powerpc/64s/exception: remove confusing IEARLY option powerpc/64s/exception: remove the SPR saving patch code macros powerpc/64s/exception: trim unused arguments from KVMTEST macro powerpc/64s/exception: hdecrementer avoid touching the stack powerpc/64s/exception: re-inline some handlers powerpc/64s/exception: Clean up SRR specifiers powerpc/64s/exception: add more comments for interrupt handlers powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is
supported
powerpc/64s/exception: soft nmi interrupt should not use
ret_from_except
powerpc/64: system call remove non-volatile GPR save optimisation powerpc/64: system call implement the bulk of the logic in C powerpc/64s: interrupt return in C
powerpc/64s/exception: remove lite interrupt return
MAINTAINERS | 2 + arch/powerpc/Kconfig | 5 +- arch/powerpc/include/asm/asm-prototypes.h | 17 +- .../powerpc/include/asm/book3s/64/kup-radix.h | 24 +- arch/powerpc/include/asm/cputime.h | 24 + arch/powerpc/include/asm/exception-64s.h | 4 - arch/powerpc/include/asm/hw_irq.h | 4 + arch/powerpc/include/asm/ptrace.h | 3 + arch/powerpc/include/asm/signal.h | 3 + arch/powerpc/include/asm/switch_to.h | 11 + arch/powerpc/include/asm/thread_info.h | 4 +- arch/powerpc/include/asm/time.h | 4 +- arch/powerpc/include/asm/unistd.h | 1 + arch/powerpc/kernel/Makefile | 9 +- arch/powerpc/kernel/entry_64.S | 880 ++------ arch/powerpc/kernel/exceptions-64e.S | 255 ++- arch/powerpc/kernel/exceptions-64s.S | 1937 ++++++++++++----- arch/powerpc/kernel/process.c | 89 +- arch/powerpc/kernel/signal.c | 144 +- arch/powerpc/kernel/signal.h | 2 - arch/powerpc/kernel/signal_32.c | 140 -- arch/powerpc/kernel/syscall_64.c | 349 +++ arch/powerpc/kernel/syscalls/syscall.tbl | 22 +- arch/powerpc/kernel/systbl.S | 9 +- arch/powerpc/kernel/time.c | 9 - arch/powerpc/kernel/vdso.c | 3 +- arch/powerpc/kernel/vector.S | 2 +- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 11 - arch/powerpc/kvm/book3s_segment.S | 7 - arch/powerpc/perf/Makefile | 5 +- arch/powerpc/perf/callchain.c | 387 +--- arch/powerpc/perf/callchain.h | 20 + arch/powerpc/perf/callchain_32.c | 197 ++ arch/powerpc/perf/callchain_64.c | 178 ++ fs/read_write.c | 3 +- 35 files changed, 2799 insertions(+), 1965 deletions(-) create mode 100644 arch/powerpc/kernel/syscall_64.c create mode 100644 arch/powerpc/perf/callchain.h create mode 100644 arch/powerpc/perf/callchain_32.c create mode 100644 arch/powerpc/perf/callchain_64.c
Signature · 1 line
2.23.0
PATCH v2 1/35 powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation
From: Nicholas Piggin <[email protected]>
The code generation macro arguments are difficult to read, and defaults can't easily be used.
This introduces a block where parameters can be set for interrupt handler code generation by the subsequent macros, and adds the first generation macro for interrupt entry.
One interrupt handler is converted to the new macros to demonstrate the change, the rest will be coverted all at once.
No generated code change.
--- arch/powerpc/kernel/exceptions-64s.S | 77 ++++++++++++++++++++++++++-- 1 file changed, 73 insertions(+), 4 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +73 -4
@@ -193,6 +193,61 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) mtctr reg; \ bctr +/* + * Interrupt code generation macros + */ +#define IVEC .L_IVEC_\name\() +#define IHSRR .L_IHSRR_\name\() +#define IAREA .L_IAREA_\name\() +#define IDAR .L_IDAR_\name\() +#define IDSISR .L_IDSISR_\name\() +#define ISET_RI .L_ISET_RI_\name\() +#define IEARLY .L_IEARLY_\name\() +#define IMASK .L_IMASK_\name\() +#define IKVM_REAL .L_IKVM_REAL_\name\() +#define IKVM_VIRT .L_IKVM_VIRT_\name\() + +#define INT_DEFINE_BEGIN(n) \ +.macro int_define_ ## n name + +#define INT_DEFINE_END(n) \ +.endm ; \ +int_define_ ## n n ; \ +do_define_int n + +.macro do_define_int name + .ifndef IVEC + .error "IVEC not defined" + .endif + .ifndef IHSRR + IHSRR=EXC_STD + .endif + .ifndef IAREA + IAREA=PACA_EXGEN + .endif + .ifndef IDAR + IDAR=0 + .endif + .ifndef IDSISR + IDSISR=0 + .endif + .ifndef ISET_RI + ISET_RI=1 + .endif + .ifndef IEARLY + IEARLY=0 + .endif + .ifndef IMASK + IMASK=0 + .endif + .ifndef IKVM_REAL + IKVM_REAL=0 + .endif + .ifndef IKVM_VIRT + IKVM_VIRT=0 + .endif +.endm + .macro INT_KVM_HANDLER name, vec, hsrr, area, skip TRAMP_KVM_BEGIN(\name\()_kvm) KVM_HANDLER \vec, \hsrr, \area, \skip
@@ -474,7 +529,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) */ GET_SCRATCH0(r10) std r10,\area\()+EX_R13(r13) - .if \dar + .if \dar == 1 .if \hsrr mfspr r10,SPRN_HDAR .else
@@ -482,7 +537,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif std r10,\area\()+EX_DAR(r13) .endif - .if \dsisr + .if \dsisr == 1 .if \hsrr mfspr r10,SPRN_HDSISR .else
@@ -506,6 +561,14 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif .endm +.macro GEN_INT_ENTRY name, virt, ool=0 + .if ! \virt + INT_HANDLER \name, IVEC, \ool, IEARLY, \virt, IHSRR, IAREA, ISET_RI, IDAR, IDSISR, IMASK, IKVM_REAL + .else + INT_HANDLER \name, IVEC, \ool, IEARLY, \virt, IHSRR, IAREA, ISET_RI, IDAR, IDSISR, IMASK, IKVM_VIRT + .endif +.endm + /* * On entry r13 points to the paca, r9-r13 are saved in the paca, * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
@@ -1143,12 +1206,18 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) bl unrecoverable_exception b . +INT_DEFINE_BEGIN(data_access) + IVEC=0x300 + IDAR=1 + IDSISR=1 + IKVM_REAL=1 +INT_DEFINE_END(data_access) EXC_REAL_BEGIN(data_access, 0x300, 0x80) - INT_HANDLER data_access, 0x300, ool=1, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY data_access, virt=0, ool=1 EXC_REAL_END(data_access, 0x300, 0x80) EXC_VIRT_BEGIN(data_access, 0x4300, 0x80) - INT_HANDLER data_access, 0x300, virt=1, dar=1, dsisr=1 + GEN_INT_ENTRY data_access, virt=1 EXC_VIRT_END(data_access, 0x4300, 0x80) INT_KVM_HANDLER data_access, 0x300, EXC_STD, PACA_EXGEN, 1 EXC_COMMON_BEGIN(data_access_common)
Signature · 1 line
2.23.0
PATCH v2 2/35 powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
No generated code change.
--- arch/powerpc/kernel/exceptions-64s.S | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +17 -7
@@ -206,6 +206,9 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) #define IMASK .L_IMASK_\name\() #define IKVM_REAL .L_IKVM_REAL_\name\() #define IKVM_VIRT .L_IKVM_VIRT_\name\() +#define ISTACK .L_ISTACK_\name\() +#define IRECONCILE .L_IRECONCILE_\name\() +#define IKUAP .L_IKUAP_\name\() #define INT_DEFINE_BEGIN(n) \ .macro int_define_ ## n name
@@ -246,6 +249,15 @@ do_define_int n .ifndef IKVM_VIRT IKVM_VIRT=0 .endif + .ifndef ISTACK + ISTACK=1 + .endif + .ifndef IRECONCILE + IRECONCILE=1 + .endif + .ifndef IKUAP + IKUAP=1 + .endif .endm .macro INT_KVM_HANDLER name, vec, hsrr, area, skip
@@ -670,6 +682,10 @@ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66) .endif .endm +.macro GEN_COMMON name + INT_COMMON IVEC, IAREA, ISTACK, IKUAP, IRECONCILE, IDAR, IDSISR +.endm + /* * Restore all registers including H/SRR0/1 saved in a stack frame of a * standard exception.
@@ -1221,13 +1237,7 @@ EXC_VIRT_BEGIN(data_access, 0x4300, 0x80) EXC_VIRT_END(data_access, 0x4300, 0x80) INT_KVM_HANDLER data_access, 0x300, EXC_STD, PACA_EXGEN, 1 EXC_COMMON_BEGIN(data_access_common) - /* - * Here r13 points to the paca, r9 contains the saved CR, - * SRR0 and SRR1 are saved in r11 and r12, - * r9 - r13 are saved in paca->exgen. - * EX_DAR and EX_DSISR have saved DAR/DSISR - */ - INT_COMMON 0x300, PACA_EXGEN, 1, 1, 1, 1, 1 + GEN_COMMON data_access ld r4,_DAR(r1) ld r5,_DSISR(r1) BEGIN_MMU_FTR_SECTION
Signature · 1 line
2.23.0
PATCH v2 3/35 powerpc/64s/exception: Add GEN_KVM macro that uses INT_DEFINE parameters
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
No generated code change.
--- arch/powerpc/kernel/exceptions-64s.S | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
arch/powerpc/kernel/exceptions-64s.S +11 -1
@@ -204,6 +204,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) #define ISET_RI .L_ISET_RI_\name\() #define IEARLY .L_IEARLY_\name\() #define IMASK .L_IMASK_\name\() +#define IKVM_SKIP .L_IKVM_SKIP_\name\() #define IKVM_REAL .L_IKVM_REAL_\name\() #define IKVM_VIRT .L_IKVM_VIRT_\name\() #define ISTACK .L_ISTACK_\name\()
@@ -243,6 +244,9 @@ do_define_int n .ifndef IMASK IMASK=0 .endif + .ifndef IKVM_SKIP + IKVM_SKIP=0 + .endif .ifndef IKVM_REAL IKVM_REAL=0 .endif
@@ -265,6 +269,10 @@ do_define_int n KVM_HANDLER \vec, \hsrr, \area, \skip .endm +.macro GEN_KVM name + KVM_HANDLER IVEC, IHSRR, IAREA, IKVM_SKIP +.endm + #ifdef CONFIG_KVM_BOOK3S_64_HANDLER #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE /*
@@ -1226,6 +1234,7 @@ INT_DEFINE_BEGIN(data_access) IVEC=0x300 IDAR=1 IDSISR=1 + IKVM_SKIP=1 IKVM_REAL=1 INT_DEFINE_END(data_access)
@@ -1235,7 +1244,8 @@ EXC_REAL_END(data_access, 0x300, 0x80) EXC_VIRT_BEGIN(data_access, 0x4300, 0x80) GEN_INT_ENTRY data_access, virt=1 EXC_VIRT_END(data_access, 0x4300, 0x80) -INT_KVM_HANDLER data_access, 0x300, EXC_STD, PACA_EXGEN, 1 +TRAMP_KVM_BEGIN(data_access_kvm) + GEN_KVM data_access EXC_COMMON_BEGIN(data_access_common) GEN_COMMON data_access ld r4,_DAR(r1)
Signature · 1 line
2.23.0
PATCH v2 4/35 powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
These don't provide a large amount of code sharing. Removing them makes code easier to shuffle around. For example, some of the common instructions will be moved into the common code gen macro.
No generated code change.
--- arch/powerpc/kernel/exceptions-64s.S | 160 ++++++++++++++++++++------- 1 file changed, 117 insertions(+), 43 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +117 -43
@@ -757,28 +757,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #define FINISH_NAP #endif -#define EXC_COMMON(name, realvec, hdlr) \ - EXC_COMMON_BEGIN(name); \ - INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \ - bl save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b ret_from_except - -/* - * Like EXC_COMMON, but for exceptions that can occur in the idle task and - * therefore need the special idle handling (finish nap and runlatch) - */ -#define EXC_COMMON_ASYNC(name, realvec, hdlr) \ - EXC_COMMON_BEGIN(name); \ - INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \ - FINISH_NAP; \ - RUNLATCH_ON; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b ret_from_except_lite - - /* * There are a few constraints to be concerned with. * - Real mode exceptions code/data must be located at their physical location.
@@ -1349,7 +1327,13 @@ EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100) INT_HANDLER hardware_interrupt, 0x500, virt=1, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1 EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100) INT_KVM_HANDLER hardware_interrupt, 0x500, EXC_HV_OR_STD, PACA_EXGEN, 0 -EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ) +EXC_COMMON_BEGIN(hardware_interrupt_common) + INT_COMMON 0x500, PACA_EXGEN, 1, 1, 1, 0, 0 + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_IRQ + b ret_from_except_lite EXC_REAL_BEGIN(alignment, 0x600, 0x100)
@@ -1455,7 +1439,13 @@ EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80) INT_HANDLER decrementer, 0x900, virt=1, bitmask=IRQS_DISABLED EXC_VIRT_END(decrementer, 0x4900, 0x80) INT_KVM_HANDLER decrementer, 0x900, EXC_STD, PACA_EXGEN, 0 -EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt) +EXC_COMMON_BEGIN(decrementer_common) + INT_COMMON 0x900, PACA_EXGEN, 1, 1, 1, 0, 0 + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD + bl timer_interrupt + b ret_from_except_lite EXC_REAL_BEGIN(hdecrementer, 0x980, 0x80)
@@ -1465,7 +1455,12 @@ EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80) INT_HANDLER hdecrementer, 0x980, virt=1, hsrr=EXC_HV, kvm=1 EXC_VIRT_END(hdecrementer, 0x4980, 0x80) INT_KVM_HANDLER hdecrementer, 0x980, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt) +EXC_COMMON_BEGIN(hdecrementer_common) + INT_COMMON 0x980, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl hdec_interrupt + b ret_from_except EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100)
@@ -1475,11 +1470,17 @@ EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100) INT_HANDLER doorbell_super, 0xa00, virt=1, bitmask=IRQS_DISABLED EXC_VIRT_END(doorbell_super, 0x4a00, 0x100) INT_KVM_HANDLER doorbell_super, 0xa00, EXC_STD, PACA_EXGEN, 0 +EXC_COMMON_BEGIN(doorbell_super_common) + INT_COMMON 0xa00, PACA_EXGEN, 1, 1, 1, 0, 0 + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_DOORBELL -EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, doorbell_exception) + bl doorbell_exception #else -EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, unknown_exception) + bl unknown_exception #endif + b ret_from_except_lite EXC_REAL_NONE(0xb00, 0x100)
@@ -1623,7 +1624,12 @@ EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100) INT_HANDLER single_step, 0xd00, virt=1 EXC_VIRT_END(single_step, 0x4d00, 0x100) INT_KVM_HANDLER single_step, 0xd00, EXC_STD, PACA_EXGEN, 0 -EXC_COMMON(single_step_common, 0xd00, single_step_exception) +EXC_COMMON_BEGIN(single_step_common) + INT_COMMON 0xd00, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl single_step_exception + b ret_from_except EXC_REAL_BEGIN(h_data_storage, 0xe00, 0x20)
@@ -1654,7 +1660,12 @@ EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20) INT_HANDLER h_instr_storage, 0xe20, ool=1, virt=1, hsrr=EXC_HV, kvm=1 EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20) INT_KVM_HANDLER h_instr_storage, 0xe20, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception) +EXC_COMMON_BEGIN(h_instr_storage_common) + INT_COMMON 0xe20, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl unknown_exception + b ret_from_except EXC_REAL_BEGIN(emulation_assist, 0xe40, 0x20)
@@ -1664,7 +1675,12 @@ EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20) INT_HANDLER emulation_assist, 0xe40, ool=1, virt=1, hsrr=EXC_HV, kvm=1 EXC_VIRT_END(emulation_assist, 0x4e40, 0x20) INT_KVM_HANDLER emulation_assist, 0xe40, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON(emulation_assist_common, 0xe40, emulation_assist_interrupt) +EXC_COMMON_BEGIN(emulation_assist_common) + INT_COMMON 0xe40, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl emulation_assist_interrupt + b ret_from_except /*
@@ -1721,11 +1737,17 @@ EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20) INT_HANDLER h_doorbell, 0xe80, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 EXC_VIRT_END(h_doorbell, 0x4e80, 0x20) INT_KVM_HANDLER h_doorbell, 0xe80, EXC_HV, PACA_EXGEN, 0 +EXC_COMMON_BEGIN(h_doorbell_common) + INT_COMMON 0xe80, PACA_EXGEN, 1, 1, 1, 0, 0 + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_DOORBELL -EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, doorbell_exception) + bl doorbell_exception #else -EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, unknown_exception) + bl unknown_exception #endif + b ret_from_except_lite EXC_REAL_BEGIN(h_virt_irq, 0xea0, 0x20)
@@ -1735,7 +1757,13 @@ EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20) INT_HANDLER h_virt_irq, 0xea0, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20) INT_KVM_HANDLER h_virt_irq, 0xea0, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON_ASYNC(h_virt_irq_common, 0xea0, do_IRQ) +EXC_COMMON_BEGIN(h_virt_irq_common) + INT_COMMON 0xea0, PACA_EXGEN, 1, 1, 1, 0, 0 + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_IRQ + b ret_from_except_lite EXC_REAL_NONE(0xec0, 0x20)
@@ -1751,7 +1779,13 @@ EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20) INT_HANDLER performance_monitor, 0xf00, ool=1, virt=1, bitmask=IRQS_PMI_DISABLED EXC_VIRT_END(performance_monitor, 0x4f00, 0x20) INT_KVM_HANDLER performance_monitor, 0xf00, EXC_STD, PACA_EXGEN, 0 -EXC_COMMON_ASYNC(performance_monitor_common, 0xf00, performance_monitor_exception) +EXC_COMMON_BEGIN(performance_monitor_common) + INT_COMMON 0xf00, PACA_EXGEN, 1, 1, 1, 0, 0 + FINISH_NAP + RUNLATCH_ON + addi r3,r1,STACK_FRAME_OVERHEAD + bl performance_monitor_exception + b ret_from_except_lite EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20)
@@ -1842,7 +1876,12 @@ EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20) INT_HANDLER facility_unavailable, 0xf60, ool=1, virt=1 EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20) INT_KVM_HANDLER facility_unavailable, 0xf60, EXC_STD, PACA_EXGEN, 0 -EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception) +EXC_COMMON_BEGIN(facility_unavailable_common) + INT_COMMON 0xf60, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl facility_unavailable_exception + b ret_from_except EXC_REAL_BEGIN(h_facility_unavailable, 0xf80, 0x20)
@@ -1852,7 +1891,12 @@ EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20) INT_HANDLER h_facility_unavailable, 0xf80, ool=1, virt=1, hsrr=EXC_HV, kvm=1 EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20) INT_KVM_HANDLER h_facility_unavailable, 0xf80, EXC_HV, PACA_EXGEN, 0 -EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception) +EXC_COMMON_BEGIN(h_facility_unavailable_common) + INT_COMMON 0xf80, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl facility_unavailable_exception + b ret_from_except EXC_REAL_NONE(0xfa0, 0x20)
@@ -1873,7 +1917,12 @@ EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100) EXC_REAL_END(cbe_system_error, 0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100) INT_KVM_HANDLER cbe_system_error, 0x1200, EXC_HV, PACA_EXGEN, 1 -EXC_COMMON(cbe_system_error_common, 0x1200, cbe_system_error_exception) +EXC_COMMON_BEGIN(cbe_system_error_common) + INT_COMMON 0x1200, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl cbe_system_error_exception + b ret_from_except #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100)
@@ -1887,7 +1936,12 @@ EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100) INT_HANDLER instruction_breakpoint, 0x1300, virt=1 EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100) INT_KVM_HANDLER instruction_breakpoint, 0x1300, EXC_STD, PACA_EXGEN, 1 -EXC_COMMON(instruction_breakpoint_common, 0x1300, instruction_breakpoint_exception) +EXC_COMMON_BEGIN(instruction_breakpoint_common) + INT_COMMON 0x1300, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl instruction_breakpoint_exception + b ret_from_except EXC_REAL_NONE(0x1400, 0x100)
@@ -1987,7 +2041,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) b . #endif -EXC_COMMON(denorm_common, 0x1500, unknown_exception) +EXC_COMMON_BEGIN(denorm_common) + INT_COMMON 0x1500, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl unknown_exception + b ret_from_except #ifdef CONFIG_CBE_RAS
@@ -1996,7 +2055,12 @@ EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100) EXC_REAL_END(cbe_maintenance, 0x1600, 0x100) EXC_VIRT_NONE(0x5600, 0x100) INT_KVM_HANDLER cbe_maintenance, 0x1600, EXC_HV, PACA_EXGEN, 1 -EXC_COMMON(cbe_maintenance_common, 0x1600, cbe_maintenance_exception) +EXC_COMMON_BEGIN(cbe_maintenance_common) + INT_COMMON 0x1600, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl cbe_maintenance_exception + b ret_from_except #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1600, 0x100) EXC_VIRT_NONE(0x5600, 0x100)
@@ -2010,11 +2074,16 @@ EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100) INT_HANDLER altivec_assist, 0x1700, virt=1 EXC_VIRT_END(altivec_assist, 0x5700, 0x100) INT_KVM_HANDLER altivec_assist, 0x1700, EXC_STD, PACA_EXGEN, 0 +EXC_COMMON_BEGIN(altivec_assist_common) + INT_COMMON 0x1700, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_ALTIVEC -EXC_COMMON(altivec_assist_common, 0x1700, altivec_assist_exception) + bl altivec_assist_exception #else -EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception) + bl unknown_exception #endif + b ret_from_except #ifdef CONFIG_CBE_RAS
@@ -2023,7 +2092,12 @@ EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100) EXC_REAL_END(cbe_thermal, 0x1800, 0x100) EXC_VIRT_NONE(0x5800, 0x100) INT_KVM_HANDLER cbe_thermal, 0x1800, EXC_HV, PACA_EXGEN, 1 -EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception) +EXC_COMMON_BEGIN(cbe_thermal_common) + INT_COMMON 0x1800, PACA_EXGEN, 1, 1, 1, 0, 0 + bl save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl cbe_thermal_exception + b ret_from_except #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1800, 0x100) EXC_VIRT_NONE(0x5800, 0x100)
Signature · 1 line
2.23.0
PATCH v2 5/35 powerpc/64s/exception: Move all interrupt handlers to new style code gen macros
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
Aside from label names and BUG line numbers, the generated code change is an additional HMI KVM handler added for the "late" KVM handler, because early and late HMI generation is achieved by defining two different interrupt types.
--- arch/powerpc/kernel/exceptions-64s.S | 556 ++++++++++++++++++++------- 1 file changed, 418 insertions(+), 138 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +418 -138
@@ -206,8 +206,10 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) #define IMASK .L_IMASK_\name\() #define IKVM_SKIP .L_IKVM_SKIP_\name\() #define IKVM_REAL .L_IKVM_REAL_\name\() +#define __IKVM_REAL(name) .L_IKVM_REAL_ ## name #define IKVM_VIRT .L_IKVM_VIRT_\name\() #define ISTACK .L_ISTACK_\name\() +#define __ISTACK(name) .L_ISTACK_ ## name #define IRECONCILE .L_IRECONCILE_\name\() #define IKUAP .L_IKUAP_\name\()
@@ -570,7 +572,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) /* nothing more */ .elseif \early mfctr r10 /* save ctr, even for !RELOCATABLE */ - BRANCH_TO_C000(r11, \name\()_early_common) + BRANCH_TO_C000(r11, \name\()_common) .elseif !\virt INT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr, \ri .else
@@ -843,6 +845,19 @@ __start_interrupts: EXC_VIRT_NONE(0x4000, 0x100) +INT_DEFINE_BEGIN(system_reset) + IVEC=0x100 + IAREA=PACA_EXNMI + /* + * MSR_RI is not enabled, because PACA_EXNMI and nmi stack is + * being used, so a nested NMI exception would corrupt it. + */ + ISET_RI=0 + ISTACK=0 + IRECONCILE=0 + IKVM_REAL=1 +INT_DEFINE_END(system_reset) + EXC_REAL_BEGIN(system_reset, 0x100, 0x100) #ifdef CONFIG_PPC_P7_NAP /*
@@ -880,11 +895,8 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) #endif - INT_HANDLER system_reset, 0x100, area=PACA_EXNMI, ri=0, kvm=1 + GEN_INT_ENTRY system_reset, virt=0 /* - * MSR_RI is not enabled, because PACA_EXNMI and nmi stack is - * being used, so a nested NMI exception would corrupt it. - * * In theory, we should not enable relocation here if it was disabled * in SRR1, because the MMU may not be configured to support it (e.g., * SLB may have been cleared). In practice, there should only be a few
@@ -893,7 +905,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) */ EXC_REAL_END(system_reset, 0x100, 0x100) EXC_VIRT_NONE(0x4100, 0x100) -INT_KVM_HANDLER system_reset 0x100, EXC_STD, PACA_EXNMI, 0 +TRAMP_KVM_BEGIN(system_reset_kvm) + GEN_KVM system_reset #ifdef CONFIG_PPC_P7_NAP TRAMP_REAL_BEGIN(system_reset_idle_wake)
@@ -908,8 +921,8 @@ TRAMP_REAL_BEGIN(system_reset_idle_wake) * Vectors for the FWNMI option. Share common code. */ TRAMP_REAL_BEGIN(system_reset_fwnmi) - /* See comment at system_reset exception, don't turn on RI */ - INT_HANDLER system_reset, 0x100, area=PACA_EXNMI, ri=0 + __IKVM_REAL(system_reset)=0 + GEN_INT_ENTRY system_reset, virt=0 #endif /* CONFIG_PPC_PSERIES */
@@ -929,7 +942,7 @@ EXC_COMMON_BEGIN(system_reset_common) mr r10,r1 ld r1,PACA_NMI_EMERG_SP(r13) subi r1,r1,INT_FRAME_SIZE - INT_COMMON 0x100, PACA_EXNMI, 0, 1, 0, 0, 0 + GEN_COMMON system_reset bl save_nvgprs /* * Set IRQS_ALL_DISABLED unconditionally so arch_irqs_disabled does
@@ -971,23 +984,46 @@ EXC_COMMON_BEGIN(system_reset_common) RFI_TO_USER_OR_KERNEL -EXC_REAL_BEGIN(machine_check, 0x200, 0x100) - INT_HANDLER machine_check, 0x200, early=1, area=PACA_EXMC, dar=1, dsisr=1 +INT_DEFINE_BEGIN(machine_check_early) + IVEC=0x200 + IAREA=PACA_EXMC /* * MSR_RI is not enabled, because PACA_EXMC is being used, so a * nested machine check corrupts it. machine_check_common enables * MSR_RI. */ + ISET_RI=0 + ISTACK=0 + IEARLY=1 + IDAR=1 + IDSISR=1 + IRECONCILE=0 + IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */ +INT_DEFINE_END(machine_check_early) + +INT_DEFINE_BEGIN(machine_check) + IVEC=0x200 + IAREA=PACA_EXMC + ISET_RI=0 + IDAR=1 + IDSISR=1 + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(machine_check) + +EXC_REAL_BEGIN(machine_check, 0x200, 0x100) + GEN_INT_ENTRY machine_check_early, virt=0 EXC_REAL_END(machine_check, 0x200, 0x100) EXC_VIRT_NONE(0x4200, 0x100) #ifdef CONFIG_PPC_PSERIES TRAMP_REAL_BEGIN(machine_check_fwnmi) /* See comment at machine_check exception, don't turn on RI */ - INT_HANDLER machine_check, 0x200, early=1, area=PACA_EXMC, dar=1, dsisr=1 + GEN_INT_ENTRY machine_check_early, virt=0 #endif -INT_KVM_HANDLER machine_check 0x200, EXC_STD, PACA_EXMC, 1 +TRAMP_KVM_BEGIN(machine_check_kvm) + GEN_KVM machine_check #define MACHINE_CHECK_HANDLER_WINDUP \ /* Clear MSR_RI before setting SRR0 and SRR1. */\
@@ -1039,8 +1075,7 @@ EXC_COMMON_BEGIN(machine_check_early_common) bgt cr1,unrecoverable_mce /* Check if we hit limit of 4 */ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ - /* We don't touch AMR here, we never go to virtual mode */ - INT_COMMON 0x200, PACA_EXMC, 0, 0, 0, 1, 1 + GEN_COMMON machine_check_early BEGIN_FTR_SECTION bl enable_machine_check
@@ -1128,15 +1163,15 @@ BEGIN_FTR_SECTION mtspr SPRN_CFAR,r10 END_FTR_SECTION_IFSET(CPU_FTR_CFAR) MACHINE_CHECK_HANDLER_WINDUP - /* See comment at machine_check exception, don't turn on RI */ - INT_HANDLER machine_check, 0x200, area=PACA_EXMC, ri=0, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY machine_check, virt=0 EXC_COMMON_BEGIN(machine_check_common) /* * Machine check is different because we use a different * save area: PACA_EXMC instead of PACA_EXGEN. */ - INT_COMMON 0x200, PACA_EXMC, 1, 1, 1, 1, 1 + GEN_COMMON machine_check + FINISH_NAP /* Enable MSR_RI when finished with PACA_EXMC */ li r10,MSR_RI
@@ -1208,6 +1243,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) bl unrecoverable_exception b . + +/** + * 0x300 - Data Storage Interrupt (DSI) + * This interrupt is generated due to a data access which does not have a valid + * page table entry with permissions to allow the data access to be performed. + * DAWR matches also fault here, as do RC updates, and minor misc errors e.g., + * copy/paste, AMO, certain invalid CI accesses, etc. + * + * This interrupt is delivered to the guest (HV bit unchanged). + * + * Linux HPT responds by first attempting to refill the hash table from the + * Linux page table, then going to a full page fault if the Linux page table + * entry was insufficient. RPT goes straight to full page fault. + * + * PR KVM ...? + */ INT_DEFINE_BEGIN(data_access) IVEC=0x300 IDAR=1
@@ -1237,15 +1288,25 @@ MMU_FTR_SECTION_ELSE ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) +INT_DEFINE_BEGIN(data_access_slb) + IVEC=0x380 + IAREA=PACA_EXSLB + IRECONCILE=0 + IDAR=1 + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(data_access_slb) + EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80) - INT_HANDLER data_access_slb, 0x380, ool=1, area=PACA_EXSLB, dar=1, kvm=1 + GEN_INT_ENTRY data_access_slb, virt=0, ool=1 EXC_REAL_END(data_access_slb, 0x380, 0x80) EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80) - INT_HANDLER data_access_slb, 0x380, virt=1, area=PACA_EXSLB, dar=1 + GEN_INT_ENTRY data_access_slb, virt=1 EXC_VIRT_END(data_access_slb, 0x4380, 0x80) -INT_KVM_HANDLER data_access_slb, 0x380, EXC_STD, PACA_EXSLB, 1 +TRAMP_KVM_BEGIN(data_access_slb_kvm) + GEN_KVM data_access_slb EXC_COMMON_BEGIN(data_access_slb_common) - INT_COMMON 0x380, PACA_EXSLB, 1, 1, 0, 1, 0 + GEN_COMMON data_access_slb ld r4,_DAR(r1) addi r3,r1,STACK_FRAME_OVERHEAD BEGIN_MMU_FTR_SECTION
@@ -1269,15 +1330,23 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) b ret_from_except +INT_DEFINE_BEGIN(instruction_access) + IVEC=0x400 + IDAR=2 + IDSISR=2 + IKVM_REAL=1 +INT_DEFINE_END(instruction_access) + EXC_REAL_BEGIN(instruction_access, 0x400, 0x80) - INT_HANDLER instruction_access, 0x400, kvm=1 + GEN_INT_ENTRY instruction_access, virt=0 EXC_REAL_END(instruction_access, 0x400, 0x80) EXC_VIRT_BEGIN(instruction_access, 0x4400, 0x80) - INT_HANDLER instruction_access, 0x400, virt=1 + GEN_INT_ENTRY instruction_access, virt=1 EXC_VIRT_END(instruction_access, 0x4400, 0x80) -INT_KVM_HANDLER instruction_access, 0x400, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(instruction_access_kvm) + GEN_KVM instruction_access EXC_COMMON_BEGIN(instruction_access_common) - INT_COMMON 0x400, PACA_EXGEN, 1, 1, 1, 2, 2 + GEN_COMMON instruction_access ld r4,_DAR(r1) ld r5,_DSISR(r1) BEGIN_MMU_FTR_SECTION
@@ -1289,15 +1358,24 @@ MMU_FTR_SECTION_ELSE ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) +INT_DEFINE_BEGIN(instruction_access_slb) + IVEC=0x480 + IAREA=PACA_EXSLB + IRECONCILE=0 + IDAR=2 + IKVM_REAL=1 +INT_DEFINE_END(instruction_access_slb) + EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80) - INT_HANDLER instruction_access_slb, 0x480, area=PACA_EXSLB, kvm=1 + GEN_INT_ENTRY instruction_access_slb, virt=0 EXC_REAL_END(instruction_access_slb, 0x480, 0x80) EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80) - INT_HANDLER instruction_access_slb, 0x480, virt=1, area=PACA_EXSLB + GEN_INT_ENTRY instruction_access_slb, virt=1 EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80) -INT_KVM_HANDLER instruction_access_slb, 0x480, EXC_STD, PACA_EXSLB, 0 +TRAMP_KVM_BEGIN(instruction_access_slb_kvm) + GEN_KVM instruction_access_slb EXC_COMMON_BEGIN(instruction_access_slb_common) - INT_COMMON 0x480, PACA_EXSLB, 1, 1, 0, 2, 0 + GEN_COMMON instruction_access_slb ld r4,_DAR(r1) addi r3,r1,STACK_FRAME_OVERHEAD BEGIN_MMU_FTR_SECTION
@@ -1320,15 +1398,24 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) bl do_bad_slb_fault b ret_from_except +INT_DEFINE_BEGIN(hardware_interrupt) + IVEC=0x500 + IHSRR=EXC_HV_OR_STD + IMASK=IRQS_DISABLED + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(hardware_interrupt) + EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x100) - INT_HANDLER hardware_interrupt, 0x500, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY hardware_interrupt, virt=0 EXC_REAL_END(hardware_interrupt, 0x500, 0x100) EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100) - INT_HANDLER hardware_interrupt, 0x500, virt=1, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY hardware_interrupt, virt=1 EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100) -INT_KVM_HANDLER hardware_interrupt, 0x500, EXC_HV_OR_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(hardware_interrupt_kvm) + GEN_KVM hardware_interrupt EXC_COMMON_BEGIN(hardware_interrupt_common) - INT_COMMON 0x500, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON hardware_interrupt FINISH_NAP RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD
@@ -1336,28 +1423,42 @@ EXC_COMMON_BEGIN(hardware_interrupt_common) b ret_from_except_lite +INT_DEFINE_BEGIN(alignment) + IVEC=0x600 + IDAR=1 + IDSISR=1 + IKVM_REAL=1 +INT_DEFINE_END(alignment) + EXC_REAL_BEGIN(alignment, 0x600, 0x100) - INT_HANDLER alignment, 0x600, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY alignment, virt=0 EXC_REAL_END(alignment, 0x600, 0x100) EXC_VIRT_BEGIN(alignment, 0x4600, 0x100) - INT_HANDLER alignment, 0x600, virt=1, dar=1, dsisr=1 + GEN_INT_ENTRY alignment, virt=1 EXC_VIRT_END(alignment, 0x4600, 0x100) -INT_KVM_HANDLER alignment, 0x600, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(alignment_kvm) + GEN_KVM alignment EXC_COMMON_BEGIN(alignment_common) - INT_COMMON 0x600, PACA_EXGEN, 1, 1, 1, 1, 1 + GEN_COMMON alignment bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl alignment_exception b ret_from_except +INT_DEFINE_BEGIN(program_check) + IVEC=0x700 + IKVM_REAL=1 +INT_DEFINE_END(program_check) + EXC_REAL_BEGIN(program_check, 0x700, 0x100) - INT_HANDLER program_check, 0x700, kvm=1 + GEN_INT_ENTRY program_check, virt=0 EXC_REAL_END(program_check, 0x700, 0x100) EXC_VIRT_BEGIN(program_check, 0x4700, 0x100) - INT_HANDLER program_check, 0x700, virt=1 + GEN_INT_ENTRY program_check, virt=1 EXC_VIRT_END(program_check, 0x4700, 0x100) -INT_KVM_HANDLER program_check, 0x700, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(program_check_kvm) + GEN_KVM program_check EXC_COMMON_BEGIN(program_check_common) /* * It's possible to receive a TM Bad Thing type program check with
@@ -1383,10 +1484,12 @@ EXC_COMMON_BEGIN(program_check_common) mr r10,r1 /* Save r1 */ ld r1,PACAEMERGSP(r13) /* Use emergency stack */ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ - INT_COMMON 0x700, PACA_EXGEN, 0, 1, 1, 0, 0 + __ISTACK(program_check)=0 + GEN_COMMON program_check b 3f 2: - INT_COMMON 0x700, PACA_EXGEN, 1, 1, 1, 0, 0 + __ISTACK(program_check)=1 + GEN_COMMON program_check 3: bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD
@@ -1394,15 +1497,22 @@ EXC_COMMON_BEGIN(program_check_common) b ret_from_except +INT_DEFINE_BEGIN(fp_unavailable) + IVEC=0x800 + IRECONCILE=0 + IKVM_REAL=1 +INT_DEFINE_END(fp_unavailable) + EXC_REAL_BEGIN(fp_unavailable, 0x800, 0x100) - INT_HANDLER fp_unavailable, 0x800, kvm=1 + GEN_INT_ENTRY fp_unavailable, virt=0 EXC_REAL_END(fp_unavailable, 0x800, 0x100) EXC_VIRT_BEGIN(fp_unavailable, 0x4800, 0x100) - INT_HANDLER fp_unavailable, 0x800, virt=1 + GEN_INT_ENTRY fp_unavailable, virt=1 EXC_VIRT_END(fp_unavailable, 0x4800, 0x100) -INT_KVM_HANDLER fp_unavailable, 0x800, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(fp_unavailable_kvm) + GEN_KVM fp_unavailable EXC_COMMON_BEGIN(fp_unavailable_common) - INT_COMMON 0x800, PACA_EXGEN, 1, 1, 0, 0, 0 + GEN_COMMON fp_unavailable bne 1f /* if from user, just load it up */ bl save_nvgprs RECONCILE_IRQ_STATE(r10, r11)
@@ -1432,15 +1542,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) #endif +INT_DEFINE_BEGIN(decrementer) + IVEC=0x900 + IMASK=IRQS_DISABLED + IKVM_REAL=1 +INT_DEFINE_END(decrementer) + EXC_REAL_BEGIN(decrementer, 0x900, 0x80) - INT_HANDLER decrementer, 0x900, ool=1, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY decrementer, virt=0, ool=1 EXC_REAL_END(decrementer, 0x900, 0x80) EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80) - INT_HANDLER decrementer, 0x900, virt=1, bitmask=IRQS_DISABLED + GEN_INT_ENTRY decrementer, virt=1 EXC_VIRT_END(decrementer, 0x4900, 0x80) -INT_KVM_HANDLER decrementer, 0x900, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(decrementer_kvm) + GEN_KVM decrementer EXC_COMMON_BEGIN(decrementer_common) - INT_COMMON 0x900, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON decrementer FINISH_NAP RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD
@@ -1448,30 +1565,45 @@ EXC_COMMON_BEGIN(decrementer_common) b ret_from_except_lite +INT_DEFINE_BEGIN(hdecrementer) + IVEC=0x980 + IHSRR=EXC_HV + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(hdecrementer) + EXC_REAL_BEGIN(hdecrementer, 0x980, 0x80) - INT_HANDLER hdecrementer, 0x980, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY hdecrementer, virt=0 EXC_REAL_END(hdecrementer, 0x980, 0x80) EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80) - INT_HANDLER hdecrementer, 0x980, virt=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY hdecrementer, virt=1 EXC_VIRT_END(hdecrementer, 0x4980, 0x80) -INT_KVM_HANDLER hdecrementer, 0x980, EXC_HV, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(hdecrementer_kvm) + GEN_KVM hdecrementer EXC_COMMON_BEGIN(hdecrementer_common) - INT_COMMON 0x980, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON hdecrementer bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl hdec_interrupt b ret_from_except +INT_DEFINE_BEGIN(doorbell_super) + IVEC=0xa00 + IMASK=IRQS_DISABLED + IKVM_REAL=1 +INT_DEFINE_END(doorbell_super) + EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100) - INT_HANDLER doorbell_super, 0xa00, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY doorbell_super, virt=0 EXC_REAL_END(doorbell_super, 0xa00, 0x100) EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100) - INT_HANDLER doorbell_super, 0xa00, virt=1, bitmask=IRQS_DISABLED + GEN_INT_ENTRY doorbell_super, virt=1 EXC_VIRT_END(doorbell_super, 0x4a00, 0x100) -INT_KVM_HANDLER doorbell_super, 0xa00, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(doorbell_super_kvm) + GEN_KVM doorbell_super EXC_COMMON_BEGIN(doorbell_super_common) - INT_COMMON 0xa00, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON doorbell_super FINISH_NAP RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD
@@ -1617,30 +1749,47 @@ TRAMP_KVM_BEGIN(system_call_kvm) #endif +INT_DEFINE_BEGIN(single_step) + IVEC=0xd00 + IKVM_REAL=1 +INT_DEFINE_END(single_step) + EXC_REAL_BEGIN(single_step, 0xd00, 0x100) - INT_HANDLER single_step, 0xd00, kvm=1 + GEN_INT_ENTRY single_step, virt=0 EXC_REAL_END(single_step, 0xd00, 0x100) EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100) - INT_HANDLER single_step, 0xd00, virt=1 + GEN_INT_ENTRY single_step, virt=1 EXC_VIRT_END(single_step, 0x4d00, 0x100) -INT_KVM_HANDLER single_step, 0xd00, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(single_step_kvm) + GEN_KVM single_step EXC_COMMON_BEGIN(single_step_common) - INT_COMMON 0xd00, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON single_step bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl single_step_exception b ret_from_except +INT_DEFINE_BEGIN(h_data_storage) + IVEC=0xe00 + IHSRR=EXC_HV + IDAR=1 + IDSISR=1 + IKVM_SKIP=1 + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_data_storage) + EXC_REAL_BEGIN(h_data_storage, 0xe00, 0x20) - INT_HANDLER h_data_storage, 0xe00, ool=1, hsrr=EXC_HV, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY h_data_storage, virt=0, ool=1 EXC_REAL_END(h_data_storage, 0xe00, 0x20) EXC_VIRT_BEGIN(h_data_storage, 0x4e00, 0x20) - INT_HANDLER h_data_storage, 0xe00, ool=1, virt=1, hsrr=EXC_HV, dar=1, dsisr=1, kvm=1 + GEN_INT_ENTRY h_data_storage, virt=1, ool=1 EXC_VIRT_END(h_data_storage, 0x4e00, 0x20) -INT_KVM_HANDLER h_data_storage, 0xe00, EXC_HV, PACA_EXGEN, 1 +TRAMP_KVM_BEGIN(h_data_storage_kvm) + GEN_KVM h_data_storage EXC_COMMON_BEGIN(h_data_storage_common) - INT_COMMON 0xe00, PACA_EXGEN, 1, 1, 1, 1, 1 + GEN_COMMON h_data_storage bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD BEGIN_MMU_FTR_SECTION
@@ -1653,30 +1802,46 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX) b ret_from_except +INT_DEFINE_BEGIN(h_instr_storage) + IVEC=0xe20 + IHSRR=EXC_HV + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_instr_storage) + EXC_REAL_BEGIN(h_instr_storage, 0xe20, 0x20) - INT_HANDLER h_instr_storage, 0xe20, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY h_instr_storage, virt=0, ool=1 EXC_REAL_END(h_instr_storage, 0xe20, 0x20) EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20) - INT_HANDLER h_instr_storage, 0xe20, ool=1, virt=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY h_instr_storage, virt=1, ool=1 EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20) -INT_KVM_HANDLER h_instr_storage, 0xe20, EXC_HV, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(h_instr_storage_kvm) + GEN_KVM h_instr_storage EXC_COMMON_BEGIN(h_instr_storage_common) - INT_COMMON 0xe20, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON h_instr_storage bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl unknown_exception b ret_from_except +INT_DEFINE_BEGIN(emulation_assist) + IVEC=0xe40 + IHSRR=EXC_HV + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(emulation_assist) + EXC_REAL_BEGIN(emulation_assist, 0xe40, 0x20) - INT_HANDLER emulation_assist, 0xe40, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY emulation_assist, virt=0, ool=1 EXC_REAL_END(emulation_assist, 0xe40, 0x20) EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20) - INT_HANDLER emulation_assist, 0xe40, ool=1, virt=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY emulation_assist, virt=1, ool=1 EXC_VIRT_END(emulation_assist, 0x4e40, 0x20) -INT_KVM_HANDLER emulation_assist, 0xe40, EXC_HV, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(emulation_assist_kvm) + GEN_KVM emulation_assist EXC_COMMON_BEGIN(emulation_assist_common) - INT_COMMON 0xe40, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON emulation_assist bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl emulation_assist_interrupt
@@ -1688,11 +1853,32 @@ EXC_COMMON_BEGIN(emulation_assist_common) * first, and then eventaully from there to the trampoline to get into virtual * mode. */ +INT_DEFINE_BEGIN(hmi_exception_early) + IVEC=0xe60 + IHSRR=EXC_HV + IEARLY=1 + ISTACK=0 + IRECONCILE=0 + IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */ + IKVM_REAL=1 +INT_DEFINE_END(hmi_exception_early) + +INT_DEFINE_BEGIN(hmi_exception) + IVEC=0xe60 + IHSRR=EXC_HV + IMASK=IRQS_DISABLED + IKVM_REAL=1 +INT_DEFINE_END(hmi_exception) + EXC_REAL_BEGIN(hmi_exception, 0xe60, 0x20) - INT_HANDLER hmi_exception, 0xe60, ool=1, early=1, hsrr=EXC_HV, ri=0, kvm=1 + GEN_INT_ENTRY hmi_exception_early, virt=0, ool=1 EXC_REAL_END(hmi_exception, 0xe60, 0x20) EXC_VIRT_NONE(0x4e60, 0x20) -INT_KVM_HANDLER hmi_exception, 0xe60, EXC_HV, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(hmi_exception_early_kvm) + GEN_KVM hmi_exception_early +TRAMP_KVM_BEGIN(hmi_exception_kvm) + GEN_KVM hmi_exception + EXC_COMMON_BEGIN(hmi_exception_early_common) mtctr r10 /* Restore ctr */ mfspr r11,SPRN_HSRR0 /* Save HSRR0 */
@@ -1701,8 +1887,7 @@ EXC_COMMON_BEGIN(hmi_exception_early_common) ld r1,PACAEMERGSP(r13) /* Use emergency stack for realmode */ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ - /* We don't touch AMR here, we never go to virtual mode */ - INT_COMMON 0xe60, PACA_EXGEN, 0, 0, 0, 0, 0 + GEN_COMMON hmi_exception_early addi r3,r1,STACK_FRAME_OVERHEAD bl hmi_exception_realmode
@@ -1718,10 +1903,10 @@ EXC_COMMON_BEGIN(hmi_exception_early_common) * firmware. */ EXCEPTION_RESTORE_REGS EXC_HV - INT_HANDLER hmi_exception, 0xe60, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY hmi_exception, virt=0 EXC_COMMON_BEGIN(hmi_exception_common) - INT_COMMON 0xe60, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON hmi_exception FINISH_NAP RUNLATCH_ON bl save_nvgprs
@@ -1730,15 +1915,24 @@ EXC_COMMON_BEGIN(hmi_exception_common) b ret_from_except +INT_DEFINE_BEGIN(h_doorbell) + IVEC=0xe80 + IHSRR=EXC_HV + IMASK=IRQS_DISABLED + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_doorbell) + EXC_REAL_BEGIN(h_doorbell, 0xe80, 0x20) - INT_HANDLER h_doorbell, 0xe80, ool=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY h_doorbell, virt=0, ool=1 EXC_REAL_END(h_doorbell, 0xe80, 0x20) EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20) - INT_HANDLER h_doorbell, 0xe80, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY h_doorbell, virt=1, ool=1 EXC_VIRT_END(h_doorbell, 0x4e80, 0x20) -INT_KVM_HANDLER h_doorbell, 0xe80, EXC_HV, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(h_doorbell_kvm) + GEN_KVM h_doorbell EXC_COMMON_BEGIN(h_doorbell_common) - INT_COMMON 0xe80, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON h_doorbell FINISH_NAP RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD
@@ -1750,15 +1944,24 @@ EXC_COMMON_BEGIN(h_doorbell_common) b ret_from_except_lite +INT_DEFINE_BEGIN(h_virt_irq) + IVEC=0xea0 + IHSRR=EXC_HV + IMASK=IRQS_DISABLED + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_virt_irq) + EXC_REAL_BEGIN(h_virt_irq, 0xea0, 0x20) - INT_HANDLER h_virt_irq, 0xea0, ool=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY h_virt_irq, virt=0, ool=1 EXC_REAL_END(h_virt_irq, 0xea0, 0x20) EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20) - INT_HANDLER h_virt_irq, 0xea0, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 + GEN_INT_ENTRY h_virt_irq, virt=1, ool=1 EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20) -INT_KVM_HANDLER h_virt_irq, 0xea0, EXC_HV, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(h_virt_irq_kvm) + GEN_KVM h_virt_irq EXC_COMMON_BEGIN(h_virt_irq_common) - INT_COMMON 0xea0, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON h_virt_irq FINISH_NAP RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD
@@ -1772,15 +1975,22 @@ EXC_REAL_NONE(0xee0, 0x20) EXC_VIRT_NONE(0x4ee0, 0x20) +INT_DEFINE_BEGIN(performance_monitor) + IVEC=0xf00 + IMASK=IRQS_PMI_DISABLED + IKVM_REAL=1 +INT_DEFINE_END(performance_monitor) + EXC_REAL_BEGIN(performance_monitor, 0xf00, 0x20) - INT_HANDLER performance_monitor, 0xf00, ool=1, bitmask=IRQS_PMI_DISABLED, kvm=1 + GEN_INT_ENTRY performance_monitor, virt=0, ool=1 EXC_REAL_END(performance_monitor, 0xf00, 0x20) EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20) - INT_HANDLER performance_monitor, 0xf00, ool=1, virt=1, bitmask=IRQS_PMI_DISABLED + GEN_INT_ENTRY performance_monitor, virt=1, ool=1 EXC_VIRT_END(performance_monitor, 0x4f00, 0x20) -INT_KVM_HANDLER performance_monitor, 0xf00, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(performance_monitor_kvm) + GEN_KVM performance_monitor EXC_COMMON_BEGIN(performance_monitor_common) - INT_COMMON 0xf00, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON performance_monitor FINISH_NAP RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD
@@ -1788,15 +1998,22 @@ EXC_COMMON_BEGIN(performance_monitor_common) b ret_from_except_lite +INT_DEFINE_BEGIN(altivec_unavailable) + IVEC=0xf20 + IRECONCILE=0 + IKVM_REAL=1 +INT_DEFINE_END(altivec_unavailable) + EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20) - INT_HANDLER altivec_unavailable, 0xf20, ool=1, kvm=1 + GEN_INT_ENTRY altivec_unavailable, virt=0, ool=1 EXC_REAL_END(altivec_unavailable, 0xf20, 0x20) EXC_VIRT_BEGIN(altivec_unavailable, 0x4f20, 0x20) - INT_HANDLER altivec_unavailable, 0xf20, ool=1, virt=1 + GEN_INT_ENTRY altivec_unavailable, virt=1, ool=1 EXC_VIRT_END(altivec_unavailable, 0x4f20, 0x20) -INT_KVM_HANDLER altivec_unavailable, 0xf20, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(altivec_unavailable_kvm) + GEN_KVM altivec_unavailable EXC_COMMON_BEGIN(altivec_unavailable_common) - INT_COMMON 0xf20, PACA_EXGEN, 1, 1, 0, 0, 0 + GEN_COMMON altivec_unavailable #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION beq 1f
@@ -1829,15 +2046,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) b ret_from_except +INT_DEFINE_BEGIN(vsx_unavailable) + IVEC=0xf40 + IRECONCILE=0 + IKVM_REAL=1 +INT_DEFINE_END(vsx_unavailable) + EXC_REAL_BEGIN(vsx_unavailable, 0xf40, 0x20) - INT_HANDLER vsx_unavailable, 0xf40, ool=1, kvm=1 + GEN_INT_ENTRY vsx_unavailable, virt=0, ool=1 EXC_REAL_END(vsx_unavailable, 0xf40, 0x20) EXC_VIRT_BEGIN(vsx_unavailable, 0x4f40, 0x20) - INT_HANDLER vsx_unavailable, 0xf40, ool=1, virt=1 + GEN_INT_ENTRY vsx_unavailable, virt=1, ool=1 EXC_VIRT_END(vsx_unavailable, 0x4f40, 0x20) -INT_KVM_HANDLER vsx_unavailable, 0xf40, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(vsx_unavailable_kvm) + GEN_KVM vsx_unavailable EXC_COMMON_BEGIN(vsx_unavailable_common) - INT_COMMON 0xf40, PACA_EXGEN, 1, 1, 0, 0, 0 + GEN_COMMON vsx_unavailable #ifdef CONFIG_VSX BEGIN_FTR_SECTION beq 1f
@@ -1869,30 +2093,44 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) b ret_from_except +INT_DEFINE_BEGIN(facility_unavailable) + IVEC=0xf60 + IKVM_REAL=1 +INT_DEFINE_END(facility_unavailable) + EXC_REAL_BEGIN(facility_unavailable, 0xf60, 0x20) - INT_HANDLER facility_unavailable, 0xf60, ool=1, kvm=1 + GEN_INT_ENTRY facility_unavailable, virt=0, ool=1 EXC_REAL_END(facility_unavailable, 0xf60, 0x20) EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20) - INT_HANDLER facility_unavailable, 0xf60, ool=1, virt=1 + GEN_INT_ENTRY facility_unavailable, virt=1, ool=1 EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20) -INT_KVM_HANDLER facility_unavailable, 0xf60, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(facility_unavailable_kvm) + GEN_KVM facility_unavailable EXC_COMMON_BEGIN(facility_unavailable_common) - INT_COMMON 0xf60, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON facility_unavailable bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl facility_unavailable_exception b ret_from_except +INT_DEFINE_BEGIN(h_facility_unavailable) + IVEC=0xf80 + IHSRR=EXC_HV + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(h_facility_unavailable) + EXC_REAL_BEGIN(h_facility_unavailable, 0xf80, 0x20) - INT_HANDLER h_facility_unavailable, 0xf80, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY h_facility_unavailable, virt=0, ool=1 EXC_REAL_END(h_facility_unavailable, 0xf80, 0x20) EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20) - INT_HANDLER h_facility_unavailable, 0xf80, ool=1, virt=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY h_facility_unavailable, virt=1, ool=1 EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20) -INT_KVM_HANDLER h_facility_unavailable, 0xf80, EXC_HV, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(h_facility_unavailable_kvm) + GEN_KVM h_facility_unavailable EXC_COMMON_BEGIN(h_facility_unavailable_common) - INT_COMMON 0xf80, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON h_facility_unavailable bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl facility_unavailable_exception
@@ -1912,13 +2150,21 @@ EXC_REAL_NONE(0x1100, 0x100) EXC_VIRT_NONE(0x5100, 0x100) #ifdef CONFIG_CBE_RAS +INT_DEFINE_BEGIN(cbe_system_error) + IVEC=0x1200 + IHSRR=EXC_HV + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(cbe_system_error) + EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100) - INT_HANDLER cbe_system_error, 0x1200, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY cbe_system_error, virt=0 EXC_REAL_END(cbe_system_error, 0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100) -INT_KVM_HANDLER cbe_system_error, 0x1200, EXC_HV, PACA_EXGEN, 1 +TRAMP_KVM_BEGIN(cbe_system_error_kvm) + GEN_KVM cbe_system_error EXC_COMMON_BEGIN(cbe_system_error_common) - INT_COMMON 0x1200, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON cbe_system_error bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl cbe_system_error_exception
@@ -1929,15 +2175,22 @@ EXC_VIRT_NONE(0x5200, 0x100) #endif +INT_DEFINE_BEGIN(instruction_breakpoint) + IVEC=0x1300 + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(instruction_breakpoint) + EXC_REAL_BEGIN(instruction_breakpoint, 0x1300, 0x100) - INT_HANDLER instruction_breakpoint, 0x1300, kvm=1 + GEN_INT_ENTRY instruction_breakpoint, virt=0 EXC_REAL_END(instruction_breakpoint, 0x1300, 0x100) EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100) - INT_HANDLER instruction_breakpoint, 0x1300, virt=1 + GEN_INT_ENTRY instruction_breakpoint, virt=1 EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100) -INT_KVM_HANDLER instruction_breakpoint, 0x1300, EXC_STD, PACA_EXGEN, 1 +TRAMP_KVM_BEGIN(instruction_breakpoint_kvm) + GEN_KVM instruction_breakpoint EXC_COMMON_BEGIN(instruction_breakpoint_common) - INT_COMMON 0x1300, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON instruction_breakpoint bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl instruction_breakpoint_exception
@@ -1947,30 +2200,35 @@ EXC_COMMON_BEGIN(instruction_breakpoint_common) EXC_REAL_NONE(0x1400, 0x100) EXC_VIRT_NONE(0x5400, 0x100) -EXC_REAL_BEGIN(denorm_exception_hv, 0x1500, 0x100) - INT_HANDLER denorm_exception_hv, 0x1500, early=2, hsrr=EXC_HV +INT_DEFINE_BEGIN(denorm_exception) + IVEC=0x1500 + IHSRR=EXC_HV + IEARLY=2 +INT_DEFINE_END(denorm_exception) + +EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100) + GEN_INT_ENTRY denorm_exception, virt=0 #ifdef CONFIG_PPC_DENORMALISATION mfspr r10,SPRN_HSRR1 andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist #endif - KVMTEST denorm_exception_hv, EXC_HV 0x1500 - INT_SAVE_SRR_AND_JUMP denorm_common, EXC_HV, 1 -EXC_REAL_END(denorm_exception_hv, 0x1500, 0x100) - + KVMTEST denorm_exception, EXC_HV, 0x1500 + INT_SAVE_SRR_AND_JUMP denorm_exception_common, EXC_HV, 1 +EXC_REAL_END(denorm_exception, 0x1500, 0x100) #ifdef CONFIG_PPC_DENORMALISATION EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100) - INT_HANDLER denorm_exception, 0x1500, 0, 2, 1, EXC_HV, PACA_EXGEN, 1, 0, 0, 0, 0 + GEN_INT_ENTRY denorm_exception, virt=1 mfspr r10,SPRN_HSRR1 andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist - INT_VIRT_SAVE_SRR_AND_JUMP denorm_common, EXC_HV + INT_VIRT_SAVE_SRR_AND_JUMP denorm_exception_common, EXC_HV EXC_VIRT_END(denorm_exception, 0x5500, 0x100) #else EXC_VIRT_NONE(0x5500, 0x100) #endif - -INT_KVM_HANDLER denorm_exception_hv, 0x1500, EXC_HV, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(denorm_exception_kvm) + GEN_KVM denorm_exception #ifdef CONFIG_PPC_DENORMALISATION TRAMP_REAL_BEGIN(denorm_assist)
@@ -2041,8 +2299,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) b . #endif -EXC_COMMON_BEGIN(denorm_common) - INT_COMMON 0x1500, PACA_EXGEN, 1, 1, 1, 0, 0 +EXC_COMMON_BEGIN(denorm_exception_common) + GEN_COMMON denorm_exception bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl unknown_exception
@@ -2050,13 +2308,21 @@ EXC_COMMON_BEGIN(denorm_common) #ifdef CONFIG_CBE_RAS +INT_DEFINE_BEGIN(cbe_maintenance) + IVEC=0x1600 + IHSRR=EXC_HV + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(cbe_maintenance) + EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100) - INT_HANDLER cbe_maintenance, 0x1600, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY cbe_maintenance, virt=0 EXC_REAL_END(cbe_maintenance, 0x1600, 0x100) EXC_VIRT_NONE(0x5600, 0x100) -INT_KVM_HANDLER cbe_maintenance, 0x1600, EXC_HV, PACA_EXGEN, 1 +TRAMP_KVM_BEGIN(cbe_maintenance_kvm) + GEN_KVM cbe_maintenance EXC_COMMON_BEGIN(cbe_maintenance_common) - INT_COMMON 0x1600, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON cbe_maintenance bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl cbe_maintenance_exception
@@ -2067,15 +2333,21 @@ EXC_VIRT_NONE(0x5600, 0x100) #endif +INT_DEFINE_BEGIN(altivec_assist) + IVEC=0x1700 + IKVM_REAL=1 +INT_DEFINE_END(altivec_assist) + EXC_REAL_BEGIN(altivec_assist, 0x1700, 0x100) - INT_HANDLER altivec_assist, 0x1700, kvm=1 + GEN_INT_ENTRY altivec_assist, virt=0 EXC_REAL_END(altivec_assist, 0x1700, 0x100) EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100) - INT_HANDLER altivec_assist, 0x1700, virt=1 + GEN_INT_ENTRY altivec_assist, virt=1 EXC_VIRT_END(altivec_assist, 0x5700, 0x100) -INT_KVM_HANDLER altivec_assist, 0x1700, EXC_STD, PACA_EXGEN, 0 +TRAMP_KVM_BEGIN(altivec_assist_kvm) + GEN_KVM altivec_assist EXC_COMMON_BEGIN(altivec_assist_common) - INT_COMMON 0x1700, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON altivec_assist bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_ALTIVEC
@@ -2087,13 +2359,21 @@ EXC_COMMON_BEGIN(altivec_assist_common) #ifdef CONFIG_CBE_RAS +INT_DEFINE_BEGIN(cbe_thermal) + IVEC=0x1800 + IHSRR=EXC_HV + IKVM_SKIP=1 + IKVM_REAL=1 +INT_DEFINE_END(cbe_thermal) + EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100) - INT_HANDLER cbe_thermal, 0x1800, ool=1, hsrr=EXC_HV, kvm=1 + GEN_INT_ENTRY cbe_thermal, virt=0 EXC_REAL_END(cbe_thermal, 0x1800, 0x100) EXC_VIRT_NONE(0x5800, 0x100) -INT_KVM_HANDLER cbe_thermal, 0x1800, EXC_HV, PACA_EXGEN, 1 +TRAMP_KVM_BEGIN(cbe_thermal_kvm) + GEN_KVM cbe_thermal EXC_COMMON_BEGIN(cbe_thermal_common) - INT_COMMON 0x1800, PACA_EXGEN, 1, 1, 1, 0, 0 + GEN_COMMON cbe_thermal bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl cbe_thermal_exception
Signature · 1 line
2.23.0
PATCH v2 6/35 powerpc/64s/exception: Remove old INT_ENTRY macro
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
--- arch/powerpc/kernel/exceptions-64s.S | 68 ++++++++++++---------------- 1 file changed, 30 insertions(+), 38 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +30 -38
@@ -482,13 +482,13 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) * - Fall through and continue executing in real, unrelocated mode. * This is done if early=2. */ -.macro INT_HANDLER name, vec, ool=0, early=0, virt=0, hsrr=0, area=PACA_EXGEN, ri=1, dar=0, dsisr=0, bitmask=0, kvm=0 +.macro GEN_INT_ENTRY name, virt, ool=0 SET_SCRATCH0(r13) /* save r13 */ GET_PACA(r13) - std r9,\area\()+EX_R9(r13) /* save r9 */ + std r9,IAREA+EX_R9(r13) /* save r9 */ OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR) HMT_MEDIUM - std r10,\area\()+EX_R10(r13) /* save r10 - r12 */ + std r10,IAREA+EX_R10(r13) /* save r10 - r12 */ OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR) .if \ool .if !\virt
@@ -502,47 +502,47 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif .endif - OPT_SAVE_REG_TO_PACA(\area\()+EX_PPR, r9, CPU_FTR_HAS_PPR) - OPT_SAVE_REG_TO_PACA(\area\()+EX_CFAR, r10, CPU_FTR_CFAR) + OPT_SAVE_REG_TO_PACA(IAREA+EX_PPR, r9, CPU_FTR_HAS_PPR) + OPT_SAVE_REG_TO_PACA(IAREA+EX_CFAR, r10, CPU_FTR_CFAR) INTERRUPT_TO_KERNEL - SAVE_CTR(r10, \area\()) + SAVE_CTR(r10, IAREA) mfcr r9 - .if \kvm - KVMTEST \name \hsrr \vec + .if (!\virt && IKVM_REAL) || (\virt && IKVM_VIRT) + KVMTEST \name IHSRR IVEC .endif - .if \bitmask + .if IMASK lbz r10,PACAIRQSOFTMASK(r13) - andi. r10,r10,\bitmask + andi. r10,r10,IMASK /* Associate vector numbers with bits in paca->irq_happened */ - .if \vec == 0x500 || \vec == 0xea0 + .if IVEC == 0x500 || IVEC == 0xea0 li r10,PACA_IRQ_EE - .elseif \vec == 0x900 + .elseif IVEC == 0x900 li r10,PACA_IRQ_DEC - .elseif \vec == 0xa00 || \vec == 0xe80 + .elseif IVEC == 0xa00 || IVEC == 0xe80 li r10,PACA_IRQ_DBELL - .elseif \vec == 0xe60 + .elseif IVEC == 0xe60 li r10,PACA_IRQ_HMI - .elseif \vec == 0xf00 + .elseif IVEC == 0xf00 li r10,PACA_IRQ_PMI .else .abort "Bad maskable vector" .endif - .if \hsrr == EXC_HV_OR_STD + .if IHSRR == EXC_HV_OR_STD BEGIN_FTR_SECTION bne masked_Hinterrupt FTR_SECTION_ELSE bne masked_interrupt ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr + .elseif IHSRR bne masked_Hinterrupt .else bne masked_interrupt .endif .endif - std r11,\area\()+EX_R11(r13) - std r12,\area\()+EX_R12(r13) + std r11,IAREA+EX_R11(r13) + std r12,IAREA+EX_R12(r13) /* * DAR/DSISR, SCRATCH0 must be read before setting MSR[RI],
@@ -550,47 +550,39 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) * not recoverable if they are live. */ GET_SCRATCH0(r10) - std r10,\area\()+EX_R13(r13) - .if \dar == 1 - .if \hsrr + std r10,IAREA+EX_R13(r13) + .if IDAR == 1 + .if IHSRR mfspr r10,SPRN_HDAR .else mfspr r10,SPRN_DAR .endif - std r10,\area\()+EX_DAR(r13) + std r10,IAREA+EX_DAR(r13) .endif - .if \dsisr == 1 - .if \hsrr + .if IDSISR == 1 + .if IHSRR mfspr r10,SPRN_HDSISR .else mfspr r10,SPRN_DSISR .endif - stw r10,\area\()+EX_DSISR(r13) + stw r10,IAREA+EX_DSISR(r13) .endif - .if \early == 2 + .if IEARLY == 2 /* nothing more */ - .elseif \early + .elseif IEARLY mfctr r10 /* save ctr, even for !RELOCATABLE */ BRANCH_TO_C000(r11, \name\()_common) .elseif !\virt - INT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr, \ri + INT_SAVE_SRR_AND_JUMP \name\()_common, IHSRR, ISET_RI .else - INT_VIRT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr + INT_VIRT_SAVE_SRR_AND_JUMP \name\()_common, IHSRR .endif .if \ool .popsection .endif .endm -.macro GEN_INT_ENTRY name, virt, ool=0 - .if ! \virt - INT_HANDLER \name, IVEC, \ool, IEARLY, \virt, IHSRR, IAREA, ISET_RI, IDAR, IDSISR, IMASK, IKVM_REAL - .else - INT_HANDLER \name, IVEC, \ool, IEARLY, \virt, IHSRR, IAREA, ISET_RI, IDAR, IDSISR, IMASK, IKVM_VIRT - .endif -.endm - /* * On entry r13 points to the paca, r9-r13 are saved in the paca, * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
Signature · 1 line
2.23.0
PATCH v2 7/35 powerpc/64s/exception: Remove old INT_COMMON macro
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
--- arch/powerpc/kernel/exceptions-64s.S | 51 +++++++++++++--------------- 1 file changed, 24 insertions(+), 27 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +24 -27
@@ -591,8 +591,8 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) * If stack=0, then the stack is already set in r1, and r1 is saved in r10. * PPR save and CPU accounting is not done for the !stack case (XXX why not?) */ -.macro INT_COMMON vec, area, stack, kaup, reconcile, dar, dsisr - .if \stack +.macro GEN_COMMON name + .if ISTACK andi. r10,r12,MSR_PR /* See if coming from user */ mr r10,r1 /* Save r1 */ subi r1,r1,INT_FRAME_SIZE /* alloc frame on kernel stack */
@@ -609,54 +609,54 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) std r0,GPR0(r1) /* save r0 in stackframe */ std r10,GPR1(r1) /* save r1 in stackframe */ - .if \stack - .if \kaup + .if ISTACK + .if IKUAP kuap_save_amr_and_lock r9, r10, cr1, cr0 .endif beq 101f /* if from kernel mode */ ACCOUNT_CPU_USER_ENTRY(r13, r9, r10) - SAVE_PPR(\area, r9) + SAVE_PPR(IAREA, r9) 101: .else - .if \kaup + .if IKUAP kuap_save_amr_and_lock r9, r10, cr1 .endif .endif /* Save original regs values from save area to stack frame. */ - ld r9,\area+EX_R9(r13) /* move r9, r10 to stackframe */ - ld r10,\area+EX_R10(r13) + ld r9,IAREA+EX_R9(r13) /* move r9, r10 to stackframe */ + ld r10,IAREA+EX_R10(r13) std r9,GPR9(r1) std r10,GPR10(r1) - ld r9,\area+EX_R11(r13) /* move r11 - r13 to stackframe */ - ld r10,\area+EX_R12(r13) - ld r11,\area+EX_R13(r13) + ld r9,IAREA+EX_R11(r13) /* move r11 - r13 to stackframe */ + ld r10,IAREA+EX_R12(r13) + ld r11,IAREA+EX_R13(r13) std r9,GPR11(r1) std r10,GPR12(r1) std r11,GPR13(r1) - .if \dar - .if \dar == 2 + .if IDAR + .if IDAR == 2 ld r10,_NIP(r1) .else - ld r10,\area+EX_DAR(r13) + ld r10,IAREA+EX_DAR(r13) .endif std r10,_DAR(r1) .endif - .if \dsisr - .if \dsisr == 2 + .if IDSISR + .if IDSISR == 2 ld r10,_MSR(r1) lis r11,DSISR_SRR1_MATCH_64S@h and r10,r10,r11 .else - lwz r10,\area+EX_DSISR(r13) + lwz r10,IAREA+EX_DSISR(r13) .endif std r10,_DSISR(r1) .endif BEGIN_FTR_SECTION_NESTED(66) - ld r10,\area+EX_CFAR(r13) + ld r10,IAREA+EX_CFAR(r13) std r10,ORIG_GPR3(r1) END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66) - GET_CTR(r10, \area) + GET_CTR(r10, IAREA) std r10,_CTR(r1) std r2,GPR2(r1) /* save r2 in stackframe */ SAVE_4GPRS(3, r1) /* save r3 - r6 in stackframe */
@@ -668,26 +668,22 @@ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66) mfspr r11,SPRN_XER /* save XER in stackframe */ std r10,SOFTE(r1) std r11,_XER(r1) - li r9,(\vec)+1 + li r9,(IVEC)+1 std r9,_TRAP(r1) /* set trap number */ li r10,0 ld r11,exception_marker@toc(r2) std r10,RESULT(r1) /* clear regs->result */ std r11,STACK_FRAME_OVERHEAD-16(r1) /* mark the frame */ - .if \stack + .if ISTACK ACCOUNT_STOLEN_TIME .endif - .if \reconcile + .if IRECONCILE RECONCILE_IRQ_STATE(r10, r11) .endif .endm -.macro GEN_COMMON name - INT_COMMON IVEC, IAREA, ISTACK, IKUAP, IRECONCILE, IDAR, IDSISR -.endm - /* * Restore all registers including H/SRR0/1 saved in a stack frame of a * standard exception.
@@ -2400,7 +2396,8 @@ EXC_COMMON_BEGIN(soft_nmi_common) mr r10,r1 ld r1,PACAEMERGSP(r13) subi r1,r1,INT_FRAME_SIZE - INT_COMMON 0x900, PACA_EXGEN, 0, 1, 1, 0, 0 + __ISTACK(decrementer)=0 + GEN_COMMON decrementer bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl soft_nmi_interrupt
Signature · 1 line
2.23.0
PATCH v2 8/35 powerpc/64s/exception: Remove old INT_KVM_HANDLER
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
--- arch/powerpc/kernel/exceptions-64s.S | 55 +++++++++++++--------------- 1 file changed, 26 insertions(+), 29 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +26 -29
@@ -266,15 +266,6 @@ do_define_int n .endif .endm -.macro INT_KVM_HANDLER name, vec, hsrr, area, skip - TRAMP_KVM_BEGIN(\name\()_kvm) - KVM_HANDLER \vec, \hsrr, \area, \skip -.endm - -.macro GEN_KVM name - KVM_HANDLER IVEC, IHSRR, IAREA, IKVM_SKIP -.endm - #ifdef CONFIG_KVM_BOOK3S_64_HANDLER #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE /*
@@ -293,35 +284,35 @@ do_define_int n bne \name\()_kvm .endm -.macro KVM_HANDLER vec, hsrr, area, skip - .if \skip +.macro GEN_KVM name + .if IKVM_SKIP cmpwi r10,KVM_GUEST_MODE_SKIP beq 89f .else BEGIN_FTR_SECTION_NESTED(947) - ld r10,\area+EX_CFAR(r13) + ld r10,IAREA+EX_CFAR(r13) std r10,HSTATE_CFAR(r13) END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947) .endif BEGIN_FTR_SECTION_NESTED(948) - ld r10,\area+EX_PPR(r13) + ld r10,IAREA+EX_PPR(r13) std r10,HSTATE_PPR(r13) END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) - ld r10,\area+EX_R10(r13) + ld r10,IAREA+EX_R10(r13) std r12,HSTATE_SCRATCH0(r13) sldi r12,r9,32 /* HSRR variants have the 0x2 bit added to their trap number */ - .if \hsrr == EXC_HV_OR_STD + .if IHSRR == EXC_HV_OR_STD BEGIN_FTR_SECTION - ori r12,r12,(\vec + 0x2) + ori r12,r12,(IVEC + 0x2) FTR_SECTION_ELSE - ori r12,r12,(\vec) + ori r12,r12,(IVEC) ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr - ori r12,r12,(\vec + 0x2) + .elseif IHSRR + ori r12,r12,(IVEC+ 0x2) .else - ori r12,r12,(\vec) + ori r12,r12,(IVEC) .endif #ifdef CONFIG_RELOCATABLE
@@ -334,25 +325,25 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) std r9,HSTATE_SCRATCH1(r13) __LOAD_FAR_HANDLER(r9, kvmppc_interrupt) mtctr r9 - ld r9,\area+EX_R9(r13) + ld r9,IAREA+EX_R9(r13) bctr #else - ld r9,\area+EX_R9(r13) + ld r9,IAREA+EX_R9(r13) b kvmppc_interrupt #endif - .if \skip + .if IKVM_SKIP 89: mtocrf 0x80,r9 - ld r9,\area+EX_R9(r13) - ld r10,\area+EX_R10(r13) - .if \hsrr == EXC_HV_OR_STD + ld r9,IAREA+EX_R9(r13) + ld r10,IAREA+EX_R10(r13) + .if IHSRR == EXC_HV_OR_STD BEGIN_FTR_SECTION b kvmppc_skip_Hinterrupt FTR_SECTION_ELSE b kvmppc_skip_interrupt ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif \hsrr + .elseif IHSRR b kvmppc_skip_Hinterrupt .else b kvmppc_skip_interrupt
@@ -363,7 +354,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) #else .macro KVMTEST name, hsrr, n .endm -.macro KVM_HANDLER name, vec, hsrr, area, skip +.macro GEN_KVM name .endm #endif
@@ -1640,6 +1631,12 @@ EXC_VIRT_NONE(0x4b00, 0x100) * without saving, though xer is not a good idea to use, as hardware may * interpret some bits so it may be costly to change them. */ +INT_DEFINE_BEGIN(system_call) + IVEC=0xc00 + IKVM_REAL=1 + IKVM_VIRT=1 +INT_DEFINE_END(system_call) + .macro SYSTEM_CALL virt #ifdef CONFIG_KVM_BOOK3S_64_HANDLER /*
@@ -1733,7 +1730,7 @@ TRAMP_KVM_BEGIN(system_call_kvm) SET_SCRATCH0(r10) std r9,PACA_EXGEN+EX_R9(r13) mfcr r9 - KVM_HANDLER 0xc00, EXC_STD, PACA_EXGEN, 0 + GEN_KVM system_call #endif
Signature · 1 line
2.23.0
PATCH v2 9/35 powerpc/64s/exception: Add ISIDE option
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
Rather than using DAR=2 to select the i-side registers, add an explicit option.
--- arch/powerpc/kernel/exceptions-64s.S | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +16 -7
@@ -199,6 +199,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) #define IVEC .L_IVEC_\name\() #define IHSRR .L_IHSRR_\name\() #define IAREA .L_IAREA_\name\() +#define IISIDE .L_IISIDE_\name\() #define IDAR .L_IDAR_\name\() #define IDSISR .L_IDSISR_\name\() #define ISET_RI .L_ISET_RI_\name\()
@@ -231,6 +232,9 @@ do_define_int n .ifndef IAREA IAREA=PACA_EXGEN .endif + .ifndef IISIDE + IISIDE=0 + .endif .ifndef IDAR IDAR=0 .endif
@@ -542,7 +546,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) */ GET_SCRATCH0(r10) std r10,IAREA+EX_R13(r13) - .if IDAR == 1 + .if IDAR && !IISIDE .if IHSRR mfspr r10,SPRN_HDAR .else
@@ -550,7 +554,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif std r10,IAREA+EX_DAR(r13) .endif - .if IDSISR == 1 + .if IDSISR && !IISIDE .if IHSRR mfspr r10,SPRN_HDSISR .else
@@ -625,16 +629,18 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) std r9,GPR11(r1) std r10,GPR12(r1) std r11,GPR13(r1) + .if IDAR - .if IDAR == 2 + .if IISIDE ld r10,_NIP(r1) .else ld r10,IAREA+EX_DAR(r13) .endif std r10,_DAR(r1) .endif + .if IDSISR - .if IDSISR == 2 + .if IISIDE ld r10,_MSR(r1) lis r11,DSISR_SRR1_MATCH_64S@h and r10,r10,r11
@@ -643,6 +649,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif std r10,_DSISR(r1) .endif + BEGIN_FTR_SECTION_NESTED(66) ld r10,IAREA+EX_CFAR(r13) std r10,ORIG_GPR3(r1)
@@ -1311,8 +1318,9 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) INT_DEFINE_BEGIN(instruction_access) IVEC=0x400 - IDAR=2 - IDSISR=2 + IISIDE=1 + IDAR=1 + IDSISR=1 IKVM_REAL=1 INT_DEFINE_END(instruction_access)
@@ -1341,7 +1349,8 @@ INT_DEFINE_BEGIN(instruction_access_slb) IVEC=0x480 IAREA=PACA_EXSLB IRECONCILE=0 - IDAR=2 + IISIDE=1 + IDAR=1 IKVM_REAL=1 INT_DEFINE_END(instruction_access_slb)
Signature · 1 line
2.23.0
PATCH v2 10/35 powerpc/64s/exception: move real->virt switch into the common handler
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
The real mode interrupt entry points currently use rfid to branch to the common handler in virtual mode. This is a significant amount of code, and forces other code (notably the KVM test) to live in the real mode handler.
In the interest of minimising the amount of code that runs unrelocated move the switch to virt mode into the common code, and do it with mtmsrd, which avoids clobbering SRRs (although the post-KVMTEST performance of real-mode interrupt handlers is not a big concern these days).
This requires CTR to always be saved (real-mode needs to reach 0xc...) but that's not a huge impact these days. It could be optimized away in future.
--- arch/powerpc/include/asm/exception-64s.h | 4 - arch/powerpc/kernel/exceptions-64s.S | 251 ++++++++++------------- 2 files changed, 109 insertions(+), 146 deletions(-)
arch/powerpc/include/asm/exception-64s.h +0 -4
@@ -33,11 +33,7 @@#include <asm/feature-fixups.h> /* PACA save area size in u64 units (exgen, exmc, etc) */ -#if defined(CONFIG_RELOCATABLE )#define EX_SIZE 10 -#else -#define EX_SIZE 9 -#endif /* * maximum recursive depth of MCE exceptions
arch/powerpc/kernel/exceptions-64s.S +109 -142
431 lines not on this page · raw message
Signature · 1 line
2.23.0
PATCH v2 11/35 powerpc/64s/exception: move soft-mask test to common code
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
As well as moving code out of the unrelocated vectors, this allows the masked handlers to be moved to common code, and allows the soft_nmi handler to be generated more like a regular handler.
--- arch/powerpc/kernel/exceptions-64s.S | 106 +++++++++++++-------------- 1 file changed, 49 insertions(+), 57 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +49 -57
@@ -411,36 +411,6 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .if (!\virt && IKVM_REAL) || (\virt && IKVM_VIRT) KVMTEST \name IHSRR IVEC .endif - .if IMASK - lbz r10,PACAIRQSOFTMASK(r13) - andi. r10,r10,IMASK - /* Associate vector numbers with bits in paca->irq_happened */ - .if IVEC == 0x500 || IVEC == 0xea0 - li r10,PACA_IRQ_EE - .elseif IVEC == 0x900 - li r10,PACA_IRQ_DEC - .elseif IVEC == 0xa00 || IVEC == 0xe80 - li r10,PACA_IRQ_DBELL - .elseif IVEC == 0xe60 - li r10,PACA_IRQ_HMI - .elseif IVEC == 0xf00 - li r10,PACA_IRQ_PMI - .else - .abort "Bad maskable vector" - .endif - - .if IHSRR == EXC_HV_OR_STD - BEGIN_FTR_SECTION - bne masked_Hinterrupt - FTR_SECTION_ELSE - bne masked_interrupt - ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) - .elseif IHSRR - bne masked_Hinterrupt - .else - bne masked_interrupt - .endif - .endif std r11,IAREA+EX_R11(r13) std r12,IAREA+EX_R12(r13)
@@ -524,6 +494,37 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt) .endm .macro __GEN_COMMON_BODY name + .if IMASK + lbz r10,PACAIRQSOFTMASK(r13) + andi. r10,r10,IMASK + /* Associate vector numbers with bits in paca->irq_happened */ + .if IVEC == 0x500 || IVEC == 0xea0 + li r10,PACA_IRQ_EE + .elseif IVEC == 0x900 + li r10,PACA_IRQ_DEC + .elseif IVEC == 0xa00 || IVEC == 0xe80 + li r10,PACA_IRQ_DBELL + .elseif IVEC == 0xe60 + li r10,PACA_IRQ_HMI + .elseif IVEC == 0xf00 + li r10,PACA_IRQ_PMI + .else + .abort "Bad maskable vector" + .endif + + .if IHSRR == EXC_HV_OR_STD + BEGIN_FTR_SECTION + bne masked_Hinterrupt + FTR_SECTION_ELSE + bne masked_interrupt + ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) + .elseif IHSRR + bne masked_Hinterrupt + .else + bne masked_interrupt + .endif + .endif + .if ISTACK andi. r10,r12,MSR_PR /* See if coming from user */ mr r10,r1 /* Save r1 */
@@ -2343,18 +2344,10 @@ EXC_VIRT_NONE(0x5800, 0x100) #ifdef CONFIG_PPC_WATCHDOG -#define MASKED_DEC_HANDLER_LABEL 3f - -#define MASKED_DEC_HANDLER(_H) \ -3: /* soft-nmi */ \ - std r12,PACA_EXGEN+EX_R12(r13); \ - GET_SCRATCH0(r10); \ - std r10,PACA_EXGEN+EX_R13(r13); \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - LOAD_HANDLER(r10, soft_nmi_common); \ - mtctr r10; \ - bctr +INT_DEFINE_BEGIN(soft_nmi) + IVEC=0x900 + ISTACK=0 +INT_DEFINE_END(soft_nmi) /* * Branch to soft_nmi_interrupt using the emergency stack. The emergency
@@ -2366,19 +2359,16 @@ EXC_VIRT_NONE(0x5800, 0x100) * and run it entirely with interrupts hard disabled. */ EXC_COMMON_BEGIN(soft_nmi_common) + mfspr r11,SPRN_SRR0 mr r10,r1 ld r1,PACAEMERGSP(r13) subi r1,r1,INT_FRAME_SIZE - __ISTACK(decrementer)=0 - __GEN_COMMON_BODY decrementer + __GEN_COMMON_BODY soft_nmi bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl soft_nmi_interrupt b ret_from_except -#else /* CONFIG_PPC_WATCHDOG */ -#define MASKED_DEC_HANDLER_LABEL 2f /* normal return */ -#define MASKED_DEC_HANDLER(_H) #endif /* CONFIG_PPC_WATCHDOG */ /*
@@ -2397,7 +2387,6 @@ masked_Hinterrupt: .else masked_interrupt: .endif - std r11,PACA_EXGEN+EX_R11(r13) lbz r11,PACAIRQHAPPENED(r13) or r11,r11,r10 stb r11,PACAIRQHAPPENED(r13)
@@ -2406,26 +2395,30 @@ masked_interrupt: lis r10,0x7fff ori r10,r10,0xffff mtspr SPRN_DEC,r10 - b MASKED_DEC_HANDLER_LABEL +#ifdef CONFIG_PPC_WATCHDOG + b soft_nmi_common +#else + b 2f +#endif 1: andi. r10,r10,PACA_IRQ_MUST_HARD_MASK beq 2f + xori r12,r12,MSR_EE /* clear MSR_EE */ .if \hsrr - mfspr r10,SPRN_HSRR1 - xori r10,r10,MSR_EE /* clear MSR_EE */ - mtspr SPRN_HSRR1,r10 + mtspr SPRN_HSRR1,r12 .else - mfspr r10,SPRN_SRR1 - xori r10,r10,MSR_EE /* clear MSR_EE */ - mtspr SPRN_SRR1,r10 + mtspr SPRN_SRR1,r12 .endif ori r11,r11,PACA_IRQ_HARD_DIS stb r11,PACAIRQHAPPENED(r13) 2: /* done */ + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 mtcrf 0x80,r9 std r1,PACAR1(r13) ld r9,PACA_EXGEN+EX_R9(r13) ld r10,PACA_EXGEN+EX_R10(r13) ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) /* returns to kernel where r13 must be set up, so don't restore it */ .if \hsrr HRFI_TO_KERNEL
@@ -2433,7 +2426,6 @@ masked_interrupt: RFI_TO_KERNEL .endif b . - MASKED_DEC_HANDLER(\hsrr\()) .endm TRAMP_REAL_BEGIN(stf_barrier_fallback)
@@ -2540,7 +2532,7 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback) * instruction code patches (which end up in the common .text area) * cannot reach these if they are put there. */ -USE_FIXED_SECTION(virt_trampolines) +USE_TEXT_SECTION() MASKED_INTERRUPT EXC_STD MASKED_INTERRUPT EXC_HV
Signature · 1 line
2.23.0
PATCH v2 12/35 powerpc/64s/exception: move KVM test to common code
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
This allows more code to be moved out of unrelocated regions. The system call KVMTEST is changed to be open-coded and remain in the tramp area to avoid having to move it to entry_64.S. The custom nature of the system call entry code means the hcall case can be made more streamlined than regular interrupt handlers.
--- arch/powerpc/kernel/exceptions-64s.S | 239 ++++++++++++------------ arch/powerpc/kvm/book3s_hv_rmhandlers.S | 11 -- arch/powerpc/kvm/book3s_segment.S | 7 - 3 files changed, 119 insertions(+), 138 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +119 -120
@@ -44,7 +44,6 @@ * EXC_VIRT_BEGIN/END - virt (AIL), unrelocated exception vectors * TRAMP_REAL_BEGIN - real, unrelocated helpers (virt may call these) * TRAMP_VIRT_BEGIN - virt, unreloc helpers (in practice, real can use) - * TRAMP_KVM_BEGIN - KVM handlers, these are put into real, unrelocated * EXC_COMMON - After switching to virtual, relocated mode. */
@@ -74,13 +73,6 @@ name: #define TRAMP_VIRT_BEGIN(name) \ FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name) -#ifdef CONFIG_KVM_BOOK3S_64_HANDLER -#define TRAMP_KVM_BEGIN(name) \ - TRAMP_VIRT_BEGIN(name) -#else -#define TRAMP_KVM_BEGIN(name) -#endif - #define EXC_REAL_NONE(start, size) \ FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start, size); \ FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, start, size)
@@ -271,6 +263,9 @@ do_define_int n .endm .macro GEN_KVM name + .balign IFETCH_ALIGN_BYTES +\name\()_kvm: + .if IKVM_SKIP cmpwi r10,KVM_GUEST_MODE_SKIP beq 89f
@@ -281,13 +276,18 @@ BEGIN_FTR_SECTION_NESTED(947) END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947) .endif + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 BEGIN_FTR_SECTION_NESTED(948) ld r10,IAREA+EX_PPR(r13) std r10,HSTATE_PPR(r13) END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) - ld r10,IAREA+EX_R10(r13) + ld r11,IAREA+EX_R11(r13) + ld r12,IAREA+EX_R12(r13) std r12,HSTATE_SCRATCH0(r13) sldi r12,r9,32 + ld r9,IAREA+EX_R9(r13) + ld r10,IAREA+EX_R10(r13) /* HSRR variants have the 0x2 bit added to their trap number */ .if IHSRR == EXC_HV_OR_STD BEGIN_FTR_SECTION
@@ -300,29 +300,16 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .else ori r12,r12,(IVEC) .endif - -#ifdef CONFIG_RELOCATABLE - /* - * KVM requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives - * outside the head section. CONFIG_RELOCATABLE KVM expects CTR - * to be saved in HSTATE_SCRATCH1. - */ - ld r9,IAREA+EX_CTR(r13) - std r9,HSTATE_SCRATCH1(r13) - __LOAD_FAR_HANDLER(r9, kvmppc_interrupt) - mtctr r9 - ld r9,IAREA+EX_R9(r13) - bctr -#else - ld r9,IAREA+EX_R9(r13) b kvmppc_interrupt -#endif - .if IKVM_SKIP 89: mtocrf 0x80,r9 + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 ld r9,IAREA+EX_R9(r13) ld r10,IAREA+EX_R10(r13) + ld r11,IAREA+EX_R11(r13) + ld r12,IAREA+EX_R12(r13) .if IHSRR == EXC_HV_OR_STD BEGIN_FTR_SECTION b kvmppc_skip_Hinterrupt
@@ -407,11 +394,6 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) mfctr r10 std r10,IAREA+EX_CTR(r13) mfcr r9 - - .if (!\virt && IKVM_REAL) || (\virt && IKVM_VIRT) - KVMTEST \name IHSRR IVEC - .endif - std r11,IAREA+EX_R11(r13) std r12,IAREA+EX_R12(r13)
@@ -475,6 +457,10 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .macro __GEN_COMMON_ENTRY name DEFINE_FIXED_SYMBOL(\name\()_common_real) \name\()_common_real: + .if IKVM_REAL + KVMTEST \name IHSRR IVEC + .endif + ld r10,PACAKMSR(r13) /* get MSR value for kernel */ /* MSR[RI] is clear iff using SRR regs */ .if IHSRR == EXC_HV_OR_STD
@@ -487,9 +473,17 @@ DEFINE_FIXED_SYMBOL(\name\()_common_real) mtmsrd r10 .if IVIRT + .if IKVM_VIRT + b 1f /* skip the virt test coming from real */ + .endif + .balign IFETCH_ALIGN_BYTES DEFINE_FIXED_SYMBOL(\name\()_common_virt) \name\()_common_virt: + .if IKVM_VIRT + KVMTEST \name IHSRR IVEC +1: + .endif .endif /* IVIRT */ .endm
@@ -848,8 +842,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) */ EXC_REAL_END(system_reset, 0x100, 0x100) EXC_VIRT_NONE(0x4100, 0x100) -TRAMP_KVM_BEGIN(system_reset_kvm) - GEN_KVM system_reset #ifdef CONFIG_PPC_P7_NAP TRAMP_REAL_BEGIN(system_reset_idle_wake)
@@ -927,6 +919,8 @@ EXC_COMMON_BEGIN(system_reset_common) EXCEPTION_RESTORE_REGS EXC_STD RFI_TO_USER_OR_KERNEL + GEN_KVM system_reset + INT_DEFINE_BEGIN(machine_check_early) IVEC=0x200
@@ -968,9 +962,6 @@ TRAMP_REAL_BEGIN(machine_check_fwnmi) GEN_INT_ENTRY machine_check_early, virt=0 #endif -TRAMP_KVM_BEGIN(machine_check_kvm) - GEN_KVM machine_check - #define MACHINE_CHECK_HANDLER_WINDUP \ /* Clear MSR_RI before setting SRR0 and SRR1. */\ li r9,0; \
@@ -1126,6 +1117,9 @@ EXC_COMMON_BEGIN(machine_check_common) bl machine_check_exception b ret_from_except + GEN_KVM machine_check + + #ifdef CONFIG_PPC_P7_NAP /* * This is an idle wakeup. Low level machine check has already been
@@ -1218,8 +1212,6 @@ EXC_REAL_END(data_access, 0x300, 0x80) EXC_VIRT_BEGIN(data_access, 0x4300, 0x80) GEN_INT_ENTRY data_access, virt=1 EXC_VIRT_END(data_access, 0x4300, 0x80) -TRAMP_KVM_BEGIN(data_access_kvm) - GEN_KVM data_access EXC_COMMON_BEGIN(data_access_common) GEN_COMMON data_access ld r4,_DAR(r1)
@@ -1232,6 +1224,8 @@ MMU_FTR_SECTION_ELSE b handle_page_fault ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) + GEN_KVM data_access + INT_DEFINE_BEGIN(data_access_slb) IVEC=0x380
@@ -1248,8 +1242,6 @@ EXC_REAL_END(data_access_slb, 0x380, 0x80) EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80) GEN_INT_ENTRY data_access_slb, virt=1 EXC_VIRT_END(data_access_slb, 0x4380, 0x80) -TRAMP_KVM_BEGIN(data_access_slb_kvm) - GEN_KVM data_access_slb EXC_COMMON_BEGIN(data_access_slb_common) GEN_COMMON data_access_slb ld r4,_DAR(r1)
@@ -1274,6 +1266,8 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) bl do_bad_slb_fault b ret_from_except + GEN_KVM data_access_slb + INT_DEFINE_BEGIN(instruction_access) IVEC=0x400
@@ -1289,8 +1283,6 @@ EXC_REAL_END(instruction_access, 0x400, 0x80) EXC_VIRT_BEGIN(instruction_access, 0x4400, 0x80) GEN_INT_ENTRY instruction_access, virt=1 EXC_VIRT_END(instruction_access, 0x4400, 0x80) -TRAMP_KVM_BEGIN(instruction_access_kvm) - GEN_KVM instruction_access EXC_COMMON_BEGIN(instruction_access_common) GEN_COMMON instruction_access ld r4,_DAR(r1)
@@ -1303,6 +1295,8 @@ MMU_FTR_SECTION_ELSE b handle_page_fault ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) + GEN_KVM instruction_access + INT_DEFINE_BEGIN(instruction_access_slb) IVEC=0x480
@@ -1319,8 +1313,6 @@ EXC_REAL_END(instruction_access_slb, 0x480, 0x80) EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80) GEN_INT_ENTRY instruction_access_slb, virt=1 EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80) -TRAMP_KVM_BEGIN(instruction_access_slb_kvm) - GEN_KVM instruction_access_slb EXC_COMMON_BEGIN(instruction_access_slb_common) GEN_COMMON instruction_access_slb ld r4,_DAR(r1)
@@ -1345,6 +1337,9 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) bl do_bad_slb_fault b ret_from_except + GEN_KVM instruction_access_slb + + INT_DEFINE_BEGIN(hardware_interrupt) IVEC=0x500 IHSRR=EXC_HV_OR_STD
@@ -1359,8 +1354,6 @@ EXC_REAL_END(hardware_interrupt, 0x500, 0x100) EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100) GEN_INT_ENTRY hardware_interrupt, virt=1 EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100) -TRAMP_KVM_BEGIN(hardware_interrupt_kvm) - GEN_KVM hardware_interrupt EXC_COMMON_BEGIN(hardware_interrupt_common) GEN_COMMON hardware_interrupt FINISH_NAP
@@ -1369,6 +1362,8 @@ EXC_COMMON_BEGIN(hardware_interrupt_common) bl do_IRQ b ret_from_except_lite + GEN_KVM hardware_interrupt + INT_DEFINE_BEGIN(alignment) IVEC=0x600
@@ -1383,8 +1378,6 @@ EXC_REAL_END(alignment, 0x600, 0x100) EXC_VIRT_BEGIN(alignment, 0x4600, 0x100) GEN_INT_ENTRY alignment, virt=1 EXC_VIRT_END(alignment, 0x4600, 0x100) -TRAMP_KVM_BEGIN(alignment_kvm) - GEN_KVM alignment EXC_COMMON_BEGIN(alignment_common) GEN_COMMON alignment bl save_nvgprs
@@ -1392,6 +1385,8 @@ EXC_COMMON_BEGIN(alignment_common) bl alignment_exception b ret_from_except + GEN_KVM alignment + INT_DEFINE_BEGIN(program_check) IVEC=0x700
@@ -1404,8 +1399,6 @@ EXC_REAL_END(program_check, 0x700, 0x100) EXC_VIRT_BEGIN(program_check, 0x4700, 0x100) GEN_INT_ENTRY program_check, virt=1 EXC_VIRT_END(program_check, 0x4700, 0x100) -TRAMP_KVM_BEGIN(program_check_kvm) - GEN_KVM program_check EXC_COMMON_BEGIN(program_check_common) __GEN_COMMON_ENTRY program_check
@@ -1445,6 +1438,8 @@ EXC_COMMON_BEGIN(program_check_common) bl program_check_exception b ret_from_except + GEN_KVM program_check + INT_DEFINE_BEGIN(fp_unavailable) IVEC=0x800
@@ -1458,8 +1453,6 @@ EXC_REAL_END(fp_unavailable, 0x800, 0x100) EXC_VIRT_BEGIN(fp_unavailable, 0x4800, 0x100) GEN_INT_ENTRY fp_unavailable, virt=1 EXC_VIRT_END(fp_unavailable, 0x4800, 0x100) -TRAMP_KVM_BEGIN(fp_unavailable_kvm) - GEN_KVM fp_unavailable EXC_COMMON_BEGIN(fp_unavailable_common) GEN_COMMON fp_unavailable bne 1f /* if from user, just load it up */
@@ -1490,6 +1483,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) b ret_from_except #endif + GEN_KVM fp_unavailable + INT_DEFINE_BEGIN(decrementer) IVEC=0x900
@@ -1503,8 +1498,6 @@ EXC_REAL_END(decrementer, 0x900, 0x80) EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80) GEN_INT_ENTRY decrementer, virt=1 EXC_VIRT_END(decrementer, 0x4900, 0x80) -TRAMP_KVM_BEGIN(decrementer_kvm) - GEN_KVM decrementer EXC_COMMON_BEGIN(decrementer_common) GEN_COMMON decrementer FINISH_NAP
@@ -1513,6 +1506,8 @@ EXC_COMMON_BEGIN(decrementer_common) bl timer_interrupt b ret_from_except_lite + GEN_KVM decrementer + INT_DEFINE_BEGIN(hdecrementer) IVEC=0x980
@@ -1527,8 +1522,6 @@ EXC_REAL_END(hdecrementer, 0x980, 0x80) EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80) GEN_INT_ENTRY hdecrementer, virt=1 EXC_VIRT_END(hdecrementer, 0x4980, 0x80) -TRAMP_KVM_BEGIN(hdecrementer_kvm) - GEN_KVM hdecrementer EXC_COMMON_BEGIN(hdecrementer_common) GEN_COMMON hdecrementer bl save_nvgprs
@@ -1536,6 +1529,8 @@ EXC_COMMON_BEGIN(hdecrementer_common) bl hdec_interrupt b ret_from_except + GEN_KVM hdecrementer + INT_DEFINE_BEGIN(doorbell_super) IVEC=0xa00
@@ -1549,8 +1544,6 @@ EXC_REAL_END(doorbell_super, 0xa00, 0x100) EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100) GEN_INT_ENTRY doorbell_super, virt=1 EXC_VIRT_END(doorbell_super, 0x4a00, 0x100) -TRAMP_KVM_BEGIN(doorbell_super_kvm) - GEN_KVM doorbell_super EXC_COMMON_BEGIN(doorbell_super_common) GEN_COMMON doorbell_super FINISH_NAP
@@ -1563,6 +1556,8 @@ EXC_COMMON_BEGIN(doorbell_super_common) #endif b ret_from_except_lite + GEN_KVM doorbell_super + EXC_REAL_NONE(0xb00, 0x100) EXC_VIRT_NONE(0x4b00, 0x100)
@@ -1680,6 +1675,7 @@ EXC_VIRT_BEGIN(system_call, 0x4c00, 0x100) EXC_VIRT_END(system_call, 0x4c00, 0x100) #ifdef CONFIG_KVM_BOOK3S_64_HANDLER +TRAMP_REAL_BEGIN(system_call_kvm) /* * This is a hcall, so register convention is as above, with these * differences:
@@ -1687,20 +1683,35 @@ EXC_VIRT_END(system_call, 0x4c00, 0x100) * ctr = orig r13 * orig r10 saved in PACA */ -TRAMP_KVM_BEGIN(system_call_kvm) /* * Save the PPR (on systems that support it) before changing to * HMT_MEDIUM. That allows the KVM code to save that value into the * guest state (it is the guest's PPR value). */ - OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR) +BEGIN_FTR_SECTION_NESTED(948) + mfspr r10,SPRN_PPR + std r10,HSTATE_PPR(r13) +END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) HMT_MEDIUM - OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR) mfctr r10 SET_SCRATCH0(r10) - std r9,PACA_EXGEN+EX_R9(r13) - mfcr r9 - GEN_KVM system_call + mfcr r10 + std r12,HSTATE_SCRATCH0(r13) + sldi r12,r10,32 + ori r12,r12,0xc00 +#ifdef CONFIG_RELOCATABLE + /* + * Requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives + * outside the head section. + */ + __LOAD_FAR_HANDLER(r10, kvmppc_interrupt) + mtctr r10 + ld r10,PACA_EXGEN+EX_R10(r13) + bctr +#else + ld r10,PACA_EXGEN+EX_R10(r13) + b kvmppc_interrupt +#endif #endif
@@ -1715,8 +1726,6 @@ EXC_REAL_END(single_step, 0xd00, 0x100) EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100) GEN_INT_ENTRY single_step, virt=1 EXC_VIRT_END(single_step, 0x4d00, 0x100) -TRAMP_KVM_BEGIN(single_step_kvm) - GEN_KVM single_step EXC_COMMON_BEGIN(single_step_common) GEN_COMMON single_step bl save_nvgprs
@@ -1724,6 +1733,8 @@ EXC_COMMON_BEGIN(single_step_common) bl single_step_exception b ret_from_except + GEN_KVM single_step + INT_DEFINE_BEGIN(h_data_storage) IVEC=0xe00
@@ -1741,8 +1752,6 @@ EXC_REAL_END(h_data_storage, 0xe00, 0x20) EXC_VIRT_BEGIN(h_data_storage, 0x4e00, 0x20) GEN_INT_ENTRY h_data_storage, virt=1, ool=1 EXC_VIRT_END(h_data_storage, 0x4e00, 0x20) -TRAMP_KVM_BEGIN(h_data_storage_kvm) - GEN_KVM h_data_storage EXC_COMMON_BEGIN(h_data_storage_common) GEN_COMMON h_data_storage bl save_nvgprs
@@ -1756,6 +1765,8 @@ MMU_FTR_SECTION_ELSE ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX) b ret_from_except + GEN_KVM h_data_storage + INT_DEFINE_BEGIN(h_instr_storage) IVEC=0xe20
@@ -1770,8 +1781,6 @@ EXC_REAL_END(h_instr_storage, 0xe20, 0x20) EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20) GEN_INT_ENTRY h_instr_storage, virt=1, ool=1 EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20) -TRAMP_KVM_BEGIN(h_instr_storage_kvm) - GEN_KVM h_instr_storage EXC_COMMON_BEGIN(h_instr_storage_common) GEN_COMMON h_instr_storage bl save_nvgprs
@@ -1779,6 +1788,8 @@ EXC_COMMON_BEGIN(h_instr_storage_common) bl unknown_exception b ret_from_except + GEN_KVM h_instr_storage + INT_DEFINE_BEGIN(emulation_assist) IVEC=0xe40
@@ -1793,8 +1804,6 @@ EXC_REAL_END(emulation_assist, 0xe40, 0x20) EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20) GEN_INT_ENTRY emulation_assist, virt=1, ool=1 EXC_VIRT_END(emulation_assist, 0x4e40, 0x20) -TRAMP_KVM_BEGIN(emulation_assist_kvm) - GEN_KVM emulation_assist EXC_COMMON_BEGIN(emulation_assist_common) GEN_COMMON emulation_assist bl save_nvgprs
@@ -1802,6 +1811,8 @@ EXC_COMMON_BEGIN(emulation_assist_common) bl emulation_assist_interrupt b ret_from_except + GEN_KVM emulation_assist + /* * hmi_exception trampoline is a special case. It jumps to hmi_exception_early
@@ -1829,10 +1840,6 @@ EXC_REAL_BEGIN(hmi_exception, 0xe60, 0x20) GEN_INT_ENTRY hmi_exception_early, virt=0, ool=1 EXC_REAL_END(hmi_exception, 0xe60, 0x20) EXC_VIRT_NONE(0x4e60, 0x20) -TRAMP_KVM_BEGIN(hmi_exception_early_kvm) - GEN_KVM hmi_exception_early -TRAMP_KVM_BEGIN(hmi_exception_kvm) - GEN_KVM hmi_exception EXC_COMMON_BEGIN(hmi_exception_early_common) mfspr r11,SPRN_HSRR0 /* Save HSRR0 */
@@ -1859,6 +1866,8 @@ EXC_COMMON_BEGIN(hmi_exception_early_common) EXCEPTION_RESTORE_REGS EXC_HV GEN_INT_ENTRY hmi_exception, virt=0 + GEN_KVM hmi_exception_early + EXC_COMMON_BEGIN(hmi_exception_common) GEN_COMMON hmi_exception FINISH_NAP
@@ -1868,6 +1877,8 @@ EXC_COMMON_BEGIN(hmi_exception_common) bl handle_hmi_exception b ret_from_except + GEN_KVM hmi_exception + INT_DEFINE_BEGIN(h_doorbell) IVEC=0xe80
@@ -1883,8 +1894,6 @@ EXC_REAL_END(h_doorbell, 0xe80, 0x20) EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20) GEN_INT_ENTRY h_doorbell, virt=1, ool=1 EXC_VIRT_END(h_doorbell, 0x4e80, 0x20) -TRAMP_KVM_BEGIN(h_doorbell_kvm) - GEN_KVM h_doorbell EXC_COMMON_BEGIN(h_doorbell_common) GEN_COMMON h_doorbell FINISH_NAP
@@ -1897,6 +1906,8 @@ EXC_COMMON_BEGIN(h_doorbell_common) #endif b ret_from_except_lite + GEN_KVM h_doorbell + INT_DEFINE_BEGIN(h_virt_irq) IVEC=0xea0
@@ -1912,8 +1923,6 @@ EXC_REAL_END(h_virt_irq, 0xea0, 0x20) EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20) GEN_INT_ENTRY h_virt_irq, virt=1, ool=1 EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20) -TRAMP_KVM_BEGIN(h_virt_irq_kvm) - GEN_KVM h_virt_irq EXC_COMMON_BEGIN(h_virt_irq_common) GEN_COMMON h_virt_irq FINISH_NAP
@@ -1922,6 +1931,8 @@ EXC_COMMON_BEGIN(h_virt_irq_common) bl do_IRQ b ret_from_except_lite + GEN_KVM h_virt_irq + EXC_REAL_NONE(0xec0, 0x20) EXC_VIRT_NONE(0x4ec0, 0x20)
@@ -1941,8 +1952,6 @@ EXC_REAL_END(performance_monitor, 0xf00, 0x20) EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20) GEN_INT_ENTRY performance_monitor, virt=1, ool=1 EXC_VIRT_END(performance_monitor, 0x4f00, 0x20) -TRAMP_KVM_BEGIN(performance_monitor_kvm) - GEN_KVM performance_monitor EXC_COMMON_BEGIN(performance_monitor_common) GEN_COMMON performance_monitor FINISH_NAP
@@ -1951,6 +1960,8 @@ EXC_COMMON_BEGIN(performance_monitor_common) bl performance_monitor_exception b ret_from_except_lite + GEN_KVM performance_monitor + INT_DEFINE_BEGIN(altivec_unavailable) IVEC=0xf20
@@ -1964,8 +1975,6 @@ EXC_REAL_END(altivec_unavailable, 0xf20, 0x20) EXC_VIRT_BEGIN(altivec_unavailable, 0x4f20, 0x20) GEN_INT_ENTRY altivec_unavailable, virt=1, ool=1 EXC_VIRT_END(altivec_unavailable, 0x4f20, 0x20) -TRAMP_KVM_BEGIN(altivec_unavailable_kvm) - GEN_KVM altivec_unavailable EXC_COMMON_BEGIN(altivec_unavailable_common) GEN_COMMON altivec_unavailable #ifdef CONFIG_ALTIVEC
@@ -1999,6 +2008,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) bl altivec_unavailable_exception b ret_from_except + GEN_KVM altivec_unavailable + INT_DEFINE_BEGIN(vsx_unavailable) IVEC=0xf40
@@ -2012,8 +2023,6 @@ EXC_REAL_END(vsx_unavailable, 0xf40, 0x20) EXC_VIRT_BEGIN(vsx_unavailable, 0x4f40, 0x20) GEN_INT_ENTRY vsx_unavailable, virt=1, ool=1 EXC_VIRT_END(vsx_unavailable, 0x4f40, 0x20) -TRAMP_KVM_BEGIN(vsx_unavailable_kvm) - GEN_KVM vsx_unavailable EXC_COMMON_BEGIN(vsx_unavailable_common) GEN_COMMON vsx_unavailable #ifdef CONFIG_VSX
@@ -2046,6 +2055,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) bl vsx_unavailable_exception b ret_from_except + GEN_KVM vsx_unavailable + INT_DEFINE_BEGIN(facility_unavailable) IVEC=0xf60
@@ -2058,8 +2069,6 @@ EXC_REAL_END(facility_unavailable, 0xf60, 0x20) EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20) GEN_INT_ENTRY facility_unavailable, virt=1, ool=1 EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20) -TRAMP_KVM_BEGIN(facility_unavailable_kvm) - GEN_KVM facility_unavailable EXC_COMMON_BEGIN(facility_unavailable_common) GEN_COMMON facility_unavailable bl save_nvgprs
@@ -2067,6 +2076,8 @@ EXC_COMMON_BEGIN(facility_unavailable_common) bl facility_unavailable_exception b ret_from_except + GEN_KVM facility_unavailable + INT_DEFINE_BEGIN(h_facility_unavailable) IVEC=0xf80
@@ -2081,8 +2092,6 @@ EXC_REAL_END(h_facility_unavailable, 0xf80, 0x20) EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20) GEN_INT_ENTRY h_facility_unavailable, virt=1, ool=1 EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20) -TRAMP_KVM_BEGIN(h_facility_unavailable_kvm) - GEN_KVM h_facility_unavailable EXC_COMMON_BEGIN(h_facility_unavailable_common) GEN_COMMON h_facility_unavailable bl save_nvgprs
@@ -2090,6 +2099,8 @@ EXC_COMMON_BEGIN(h_facility_unavailable_common) bl facility_unavailable_exception b ret_from_except + GEN_KVM h_facility_unavailable + EXC_REAL_NONE(0xfa0, 0x20) EXC_VIRT_NONE(0x4fa0, 0x20)
@@ -2115,14 +2126,15 @@ EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100) GEN_INT_ENTRY cbe_system_error, virt=0 EXC_REAL_END(cbe_system_error, 0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100) -TRAMP_KVM_BEGIN(cbe_system_error_kvm) - GEN_KVM cbe_system_error EXC_COMMON_BEGIN(cbe_system_error_common) GEN_COMMON cbe_system_error bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl cbe_system_error_exception b ret_from_except + + GEN_KVM cbe_system_error + #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100)
@@ -2141,8 +2153,6 @@ EXC_REAL_END(instruction_breakpoint, 0x1300, 0x100) EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100) GEN_INT_ENTRY instruction_breakpoint, virt=1 EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100) -TRAMP_KVM_BEGIN(instruction_breakpoint_kvm) - GEN_KVM instruction_breakpoint EXC_COMMON_BEGIN(instruction_breakpoint_common) GEN_COMMON instruction_breakpoint bl save_nvgprs
@@ -2150,6 +2160,8 @@ EXC_COMMON_BEGIN(instruction_breakpoint_common) bl instruction_breakpoint_exception b ret_from_except + GEN_KVM instruction_breakpoint + EXC_REAL_NONE(0x1400, 0x100) EXC_VIRT_NONE(0x5400, 0x100)
@@ -2158,6 +2170,7 @@ INT_DEFINE_BEGIN(denorm_exception) IVEC=0x1500 IHSRR=EXC_HV IEARLY=2 + IKVM_REAL=1 INT_DEFINE_END(denorm_exception) EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100)
@@ -2167,7 +2180,6 @@ EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100) andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist #endif - KVMTEST denorm_exception, EXC_HV, 0x1500 mfspr r11,SPRN_HSRR0 mfspr r12,SPRN_HSRR1 GEN_BRANCH_TO_COMMON denorm_exception, virt=0
@@ -2185,8 +2197,6 @@ EXC_VIRT_END(denorm_exception, 0x5500, 0x100) #else EXC_VIRT_NONE(0x5500, 0x100) #endif -TRAMP_KVM_BEGIN(denorm_exception_kvm) - GEN_KVM denorm_exception #ifdef CONFIG_PPC_DENORMALISATION TRAMP_REAL_BEGIN(denorm_assist)
@@ -2264,6 +2274,8 @@ EXC_COMMON_BEGIN(denorm_exception_common) bl unknown_exception b ret_from_except + GEN_KVM denorm_exception + #ifdef CONFIG_CBE_RAS INT_DEFINE_BEGIN(cbe_maintenance)
@@ -2277,14 +2289,15 @@ EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100) GEN_INT_ENTRY cbe_maintenance, virt=0 EXC_REAL_END(cbe_maintenance, 0x1600, 0x100) EXC_VIRT_NONE(0x5600, 0x100) -TRAMP_KVM_BEGIN(cbe_maintenance_kvm) - GEN_KVM cbe_maintenance EXC_COMMON_BEGIN(cbe_maintenance_common) GEN_COMMON cbe_maintenance bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl cbe_maintenance_exception b ret_from_except + + GEN_KVM cbe_maintenance + #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1600, 0x100) EXC_VIRT_NONE(0x5600, 0x100)
@@ -2302,8 +2315,6 @@ EXC_REAL_END(altivec_assist, 0x1700, 0x100) EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100) GEN_INT_ENTRY altivec_assist, virt=1 EXC_VIRT_END(altivec_assist, 0x5700, 0x100) -TRAMP_KVM_BEGIN(altivec_assist_kvm) - GEN_KVM altivec_assist EXC_COMMON_BEGIN(altivec_assist_common) GEN_COMMON altivec_assist bl save_nvgprs
@@ -2315,6 +2326,8 @@ EXC_COMMON_BEGIN(altivec_assist_common) #endif b ret_from_except + GEN_KVM altivec_assist + #ifdef CONFIG_CBE_RAS INT_DEFINE_BEGIN(cbe_thermal)
@@ -2328,14 +2341,15 @@ EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100) GEN_INT_ENTRY cbe_thermal, virt=0 EXC_REAL_END(cbe_thermal, 0x1800, 0x100) EXC_VIRT_NONE(0x5800, 0x100) -TRAMP_KVM_BEGIN(cbe_thermal_kvm) - GEN_KVM cbe_thermal EXC_COMMON_BEGIN(cbe_thermal_common) GEN_COMMON cbe_thermal bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl cbe_thermal_exception b ret_from_except + + GEN_KVM cbe_thermal + #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1800, 0x100) EXC_VIRT_NONE(0x5800, 0x100)
@@ -2527,17 +2541,12 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback) GET_SCRATCH0(r13); hrfid -/* - * Real mode exceptions actually use this too, but alternate - * instruction code patches (which end up in the common .text area) - * cannot reach these if they are put there. - */ USE_TEXT_SECTION() MASKED_INTERRUPT EXC_STD MASKED_INTERRUPT EXC_HV #ifdef CONFIG_KVM_BOOK3S_64_HANDLER -TRAMP_REAL_BEGIN(kvmppc_skip_interrupt) +kvmppc_skip_interrupt: /* * Here all GPRs are unchanged from when the interrupt happened * except for r13, which is saved in SPRG_SCRATCH0.
@@ -2549,7 +2558,7 @@ TRAMP_REAL_BEGIN(kvmppc_skip_interrupt) RFI_TO_KERNEL b . -TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt) +kvmppc_skip_Hinterrupt: /* * Here all GPRs are unchanged from when the interrupt happened * except for r13, which is saved in SPRG_SCRATCH0.
@@ -2562,16 +2571,6 @@ TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt) b . #endif -/* - * Ensure that any handlers that get invoked from the exception prologs - * above are below the first 64KB (0x10000) of the kernel image because - * the prologs assemble the addresses of these handlers using the - * LOAD_HANDLER macro, which uses an ori instruction. - */ - -/*** Common interrupt handlers ***/ - - /* * Relocation-on interrupts: A subset of the interrupts can be delivered * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
arch/powerpc/kvm/book3s_hv_rmhandlers.S +0 -11
@@ -1265,7 +1265,6 @@ kvmppc_interrupt_hv: * R12 = (guest CR << 32) | interrupt vector * R13 = PACA * guest R12 saved in shadow VCPU SCRATCH0 - * guest CTR saved in shadow VCPU SCRATCH1 if RELOCATABLE * guest R13 saved in SPRN_SCRATCH0 */ std r9, HSTATE_SCRATCH2(r13)
@@ -1366,12 +1365,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) 11: stw r3,VCPU_HEIR(r9) /* these are volatile across C function calls */ -#ifdef CONFIG_RELOCATABLE - ld r3, HSTATE_SCRATCH1(r13) - mtctr r3 -#else mfctr r3 -#endif mfxer r4 std r3, VCPU_CTR(r9) std r4, VCPU_XER(r9)
@@ -3226,7 +3220,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_P9_TM_HV_ASSIST) * r12 is (CR << 32) | vector * r13 points to our PACA * r12 is saved in HSTATE_SCRATCH0(r13) - * ctr is saved in HSTATE_SCRATCH1(r13) if RELOCATABLE * r9 is saved in HSTATE_SCRATCH2(r13) * r13 is saved in HSPRG1 * cfar is saved in HSTATE_CFAR(r13)
@@ -3275,11 +3268,7 @@ kvmppc_bad_host_intr: ld r5, HSTATE_CFAR(r13) std r5, ORIG_GPR3(r1) mflr r3 -#ifdef CONFIG_RELOCATABLE - ld r4, HSTATE_SCRATCH1(r13) -#else mfctr r4 -#endif mfxer r5 lbz r6, PACAIRQSOFTMASK(r13) std r3, _LINK(r1)
arch/powerpc/kvm/book3s_segment.S +0 -7
@@ -167,16 +167,9 @@ kvmppc_interrupt_pr: * R12 = (guest CR << 32) | exit handler id * R13 = PACA * HSTATE.SCRATCH0 = guest R12 - * HSTATE.SCRATCH1 = guest CTR if RELOCATABLE */ #ifdef CONFIG_PPC64 /* Match 32-bit entry */ -#ifdef CONFIG_RELOCATABLE - std r9, HSTATE_SCRATCH2(r13) - ld r9, HSTATE_SCRATCH1(r13) - mtctr r9 - ld r9, HSTATE_SCRATCH2(r13) -#endif rotldi r12, r12, 32 /* Flip R12 halves for stw */ stw r12, HSTATE_SCRATCH1(r13) /* CR is now in the low half */ srdi r12, r12, 32 /* shift trap into low half */
Signature · 1 line
2.23.0
PATCH v2 13/35 powerpc/64s/exception: remove confusing IEARLY option
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
Replace IEARLY=1 and IEARLY=2 with IBRANCH_COMMON, which controls if the entry code branches to a common handler; and IREALMODE_COMMON, which controls whether the common handler should remain in real mode.
These special cases no longer avoid loading the SRR registers, there is no point as most of them load the registers immediately anyway.
--- arch/powerpc/kernel/exceptions-64s.S | 48 ++++++++++++++-------------- 1 file changed, 24 insertions(+), 24 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +24 -24
@@ -174,7 +174,8 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) #define IDAR .L_IDAR_\name\() #define IDSISR .L_IDSISR_\name\() #define ISET_RI .L_ISET_RI_\name\() -#define IEARLY .L_IEARLY_\name\() +#define IBRANCH_TO_COMMON .L_IBRANCH_TO_COMMON_\name\() +#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() #define IMASK .L_IMASK_\name\() #define IKVM_SKIP .L_IKVM_SKIP_\name\() #define IKVM_REAL .L_IKVM_REAL_\name\()
@@ -218,8 +219,15 @@ do_define_int n .ifndef ISET_RI ISET_RI=1 .endif - .ifndef IEARLY - IEARLY=0 + .ifndef IBRANCH_TO_COMMON + IBRANCH_TO_COMMON=1 + .endif + .ifndef IREALMODE_COMMON + IREALMODE_COMMON=0 + .else + .if ! IBRANCH_TO_COMMON + .error "IREALMODE_COMMON=1 but IBRANCH_TO_COMMON=0" + .endif .endif .ifndef IMASK IMASK=0
@@ -353,6 +361,11 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) */ .macro GEN_BRANCH_TO_COMMON name, virt + .if IREALMODE_COMMON + LOAD_HANDLER(r10, \name\()_common) + mtctr r10 + bctr + .else .if \virt #ifndef CONFIG_RELOCATABLE b \name\()_common_virt
@@ -366,6 +379,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) mtctr r10 bctr .endif + .endif .endm .macro GEN_INT_ENTRY name, virt, ool=0
@@ -421,11 +435,6 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) stw r10,IAREA+EX_DSISR(r13) .endif - .if IEARLY == 2 - /* nothing more */ - .elseif IEARLY - BRANCH_TO_C000(r11, \name\()_common) - .else .if IHSRR == EXC_HV_OR_STD BEGIN_FTR_SECTION mfspr r11,SPRN_HSRR0 /* save HSRR0 */
@@ -441,6 +450,8 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) mfspr r11,SPRN_SRR0 /* save SRR0 */ mfspr r12,SPRN_SRR1 /* and SRR1 */ .endif + + .if IBRANCH_TO_COMMON GEN_BRANCH_TO_COMMON \name \virt .endif
@@ -926,6 +937,7 @@ INT_DEFINE_BEGIN(machine_check_early) IVEC=0x200 IAREA=PACA_EXMC IVIRT=0 /* no virt entry point */ + IREALMODE_COMMON=1 /* * MSR_RI is not enabled, because PACA_EXMC is being used, so a * nested machine check corrupts it. machine_check_common enables
@@ -933,7 +945,6 @@ INT_DEFINE_BEGIN(machine_check_early) */ ISET_RI=0 ISTACK=0 - IEARLY=1 IDAR=1 IDSISR=1 IRECONCILE=0
@@ -973,9 +984,6 @@ TRAMP_REAL_BEGIN(machine_check_fwnmi) EXCEPTION_RESTORE_REGS EXC_STD EXC_COMMON_BEGIN(machine_check_early_common) - mfspr r11,SPRN_SRR0 - mfspr r12,SPRN_SRR1 - /* * Switch to mc_emergency stack and handle re-entrancy (we limit * the nested MCE upto level 4 to avoid stack overflow).
@@ -1822,7 +1830,7 @@ EXC_COMMON_BEGIN(emulation_assist_common) INT_DEFINE_BEGIN(hmi_exception_early) IVEC=0xe60 IHSRR=EXC_HV - IEARLY=1 + IREALMODE_COMMON=1 ISTACK=0 IRECONCILE=0 IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */
@@ -1842,8 +1850,6 @@ EXC_REAL_END(hmi_exception, 0xe60, 0x20) EXC_VIRT_NONE(0x4e60, 0x20) EXC_COMMON_BEGIN(hmi_exception_early_common) - mfspr r11,SPRN_HSRR0 /* Save HSRR0 */ - mfspr r12,SPRN_HSRR1 /* Save HSRR1 */ mr r10,r1 /* Save r1 */ ld r1,PACAEMERGSP(r13) /* Use emergency stack for realmode */ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
@@ -2169,29 +2175,23 @@ EXC_VIRT_NONE(0x5400, 0x100) INT_DEFINE_BEGIN(denorm_exception) IVEC=0x1500 IHSRR=EXC_HV - IEARLY=2 + IBRANCH_TO_COMMON=0 IKVM_REAL=1 INT_DEFINE_END(denorm_exception) EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100) GEN_INT_ENTRY denorm_exception, virt=0 #ifdef CONFIG_PPC_DENORMALISATION - mfspr r10,SPRN_HSRR1 - andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ + andis. r10,r12,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist #endif - mfspr r11,SPRN_HSRR0 - mfspr r12,SPRN_HSRR1 GEN_BRANCH_TO_COMMON denorm_exception, virt=0 EXC_REAL_END(denorm_exception, 0x1500, 0x100) #ifdef CONFIG_PPC_DENORMALISATION EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100) GEN_INT_ENTRY denorm_exception, virt=1 - mfspr r10,SPRN_HSRR1 - andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ + andis. r10,r12,(HSRR1_DENORM)@h /* denorm? */ bne+ denorm_assist - mfspr r11,SPRN_HSRR0 - mfspr r12,SPRN_HSRR1 GEN_BRANCH_TO_COMMON denorm_exception, virt=1 EXC_VIRT_END(denorm_exception, 0x5500, 0x100) #else
Signature · 1 line
2.23.0
PATCH v2 14/35 powerpc/64s/exception: remove the SPR saving patch code macros
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
These are used infrequently enough they don't provide much help, so inline them.
--- arch/powerpc/kernel/exceptions-64s.S | 82 ++++++++++------------------ 1 file changed, 28 insertions(+), 54 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +28 -54
@@ -110,46 +110,6 @@ name: #define EXC_HV 1 #define EXC_STD 0 -/* - * PPR save/restore macros used in exceptions-64s.S - * Used for P7 or later processors - */ -#define SAVE_PPR(area, ra) \ -BEGIN_FTR_SECTION_NESTED(940) \ - ld ra,area+EX_PPR(r13); /* Read PPR from paca */ \ - std ra,_PPR(r1); \ -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940) - -#define RESTORE_PPR_PACA(area, ra) \ -BEGIN_FTR_SECTION_NESTED(941) \ - ld ra,area+EX_PPR(r13); \ - mtspr SPRN_PPR,ra; \ -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941) - -/* - * Get an SPR into a register if the CPU has the given feature - */ -#define OPT_GET_SPR(ra, spr, ftr) \ -BEGIN_FTR_SECTION_NESTED(943) \ - mfspr ra,spr; \ -END_FTR_SECTION_NESTED(ftr,ftr,943) - -/* - * Set an SPR from a register if the CPU has the given feature - */ -#define OPT_SET_SPR(ra, spr, ftr) \ -BEGIN_FTR_SECTION_NESTED(943) \ - mtspr spr,ra; \ -END_FTR_SECTION_NESTED(ftr,ftr,943) - -/* - * Save a register to the PACA if the CPU has the given feature - */ -#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \ -BEGIN_FTR_SECTION_NESTED(943) \ - std ra,offset(r13); \ -END_FTR_SECTION_NESTED(ftr,ftr,943) - /* * Branch to label using its 0xC000 address. This results in instruction * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
@@ -278,18 +238,18 @@ do_define_int n cmpwi r10,KVM_GUEST_MODE_SKIP beq 89f .else -BEGIN_FTR_SECTION_NESTED(947) +BEGIN_FTR_SECTION ld r10,IAREA+EX_CFAR(r13) std r10,HSTATE_CFAR(r13) -END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) .endif ld r10,PACA_EXGEN+EX_CTR(r13) mtctr r10 -BEGIN_FTR_SECTION_NESTED(948) +BEGIN_FTR_SECTION ld r10,IAREA+EX_PPR(r13) std r10,HSTATE_PPR(r13) -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) ld r11,IAREA+EX_R11(r13) ld r12,IAREA+EX_R12(r13) std r12,HSTATE_SCRATCH0(r13)
@@ -386,10 +346,14 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) SET_SCRATCH0(r13) /* save r13 */ GET_PACA(r13) std r9,IAREA+EX_R9(r13) /* save r9 */ - OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR) +BEGIN_FTR_SECTION + mfspr r9,SPRN_PPR +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) HMT_MEDIUM std r10,IAREA+EX_R10(r13) /* save r10 - r12 */ - OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR) +BEGIN_FTR_SECTION + mfspr r10,SPRN_CFAR +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) .if \ool .if !\virt b tramp_real_\name
@@ -402,8 +366,12 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) .endif .endif - OPT_SAVE_REG_TO_PACA(IAREA+EX_PPR, r9, CPU_FTR_HAS_PPR) - OPT_SAVE_REG_TO_PACA(IAREA+EX_CFAR, r10, CPU_FTR_CFAR) +BEGIN_FTR_SECTION + std r9,IAREA+EX_PPR(r13) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) +BEGIN_FTR_SECTION + std r10,IAREA+EX_CFAR(r13) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) INTERRUPT_TO_KERNEL mfctr r10 std r10,IAREA+EX_CTR(r13)
@@ -558,7 +526,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt) .endif beq 101f /* if from kernel mode */ ACCOUNT_CPU_USER_ENTRY(r13, r9, r10) - SAVE_PPR(IAREA, r9) +BEGIN_FTR_SECTION + ld r9,IAREA+EX_PPR(r13) /* Read PPR from paca */ + std r9,_PPR(r1) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) 101: .else .if IKUAP
@@ -598,10 +569,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt) std r10,_DSISR(r1) .endif -BEGIN_FTR_SECTION_NESTED(66) +BEGIN_FTR_SECTION ld r10,IAREA+EX_CFAR(r13) std r10,ORIG_GPR3(r1) -END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66) +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) ld r10,IAREA+EX_CTR(r13) std r10,_CTR(r1) std r2,GPR2(r1) /* save r2 in stackframe */
@@ -1696,10 +1667,10 @@ TRAMP_REAL_BEGIN(system_call_kvm) * HMT_MEDIUM. That allows the KVM code to save that value into the * guest state (it is the guest's PPR value). */ -BEGIN_FTR_SECTION_NESTED(948) +BEGIN_FTR_SECTION mfspr r10,SPRN_PPR std r10,HSTATE_PPR(r13) -END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) HMT_MEDIUM mfctr r10 SET_SCRATCH0(r10)
@@ -2254,7 +2225,10 @@ denorm_done: mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 ld r9,PACA_EXGEN+EX_R9(r13) - RESTORE_PPR_PACA(PACA_EXGEN, r10) +BEGIN_FTR_SECTION + ld r10,PACA_EXGEN+EX_PPR(r13) + mtspr SPRN_PPR,r10 +END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) BEGIN_FTR_SECTION ld r10,PACA_EXGEN+EX_CFAR(r13) mtspr SPRN_CFAR,r10
Signature · 1 line
2.23.0
PATCH v2 15/35 powerpc/64s/exception: trim unused arguments from KVMTEST macro
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
--- arch/powerpc/kernel/exceptions-64s.S | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +5 -5
@@ -224,7 +224,7 @@ do_define_int n #define kvmppc_interrupt kvmppc_interrupt_pr #endif -.macro KVMTEST name, hsrr, n +.macro KVMTEST name lbz r10,HSTATE_IN_GUEST(r13) cmpwi r10,0 bne \name\()_kvm
@@ -293,7 +293,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) .endm #else -.macro KVMTEST name, hsrr, n +.macro KVMTEST name .endm .macro GEN_KVM name .endm
@@ -437,7 +437,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) DEFINE_FIXED_SYMBOL(\name\()_common_real) \name\()_common_real: .if IKVM_REAL - KVMTEST \name IHSRR IVEC + KVMTEST \name .endif ld r10,PACAKMSR(r13) /* get MSR value for kernel */
@@ -460,7 +460,7 @@ DEFINE_FIXED_SYMBOL(\name\()_common_real) DEFINE_FIXED_SYMBOL(\name\()_common_virt) \name\()_common_virt: .if IKVM_VIRT - KVMTEST \name IHSRR IVEC + KVMTEST \name 1: .endif .endif /* IVIRT */
@@ -1595,7 +1595,7 @@ INT_DEFINE_END(system_call) GET_PACA(r13) std r10,PACA_EXGEN+EX_R10(r13) INTERRUPT_TO_KERNEL - KVMTEST system_call EXC_STD 0xc00 /* uses r10, branch to system_call_kvm */ + KVMTEST system_call /* uses r10, branch to system_call_kvm */ mfctr r9 #else mr r9,r13
Signature · 1 line
2.23.0
PATCH v2 16/35 powerpc/64s/exception: hdecrementer avoid touching the stack
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
The hdec interrupt handler is reported to sometimes fire in Linux if KVM leaves it pending after a guest exists. This is harmless, so there is a no-op handler for it.
The interrupt handler currently uses the regular kernel stack. Change this to avoid touching the stack entirely.
This should be the last place where the regular Linux stack can be accessed with asynchronous interrupts (including PMI) soft-masked. It might be possible to take advantage of this invariant, e.g., to context switch the kernel stack SLB entry without clearing MSR[EE].
--- arch/powerpc/include/asm/time.h | 1 - arch/powerpc/kernel/exceptions-64s.S | 25 ++++++++++++++++++++----- arch/powerpc/kernel/time.c | 9 --------- 3 files changed, 20 insertions(+), 15 deletions(-)
arch/powerpc/include/asm/time.h +0 -1
@@ -24,7 +24,6 @@ extern struct clock_event_device decrementer_clockevent;extern void generic_calibrate_decr (void ); -extern void hdec_interrupt (struct pt_regs *regs);/* Some sane defaults: 125 MHz timebase, 1GHz processor */ extern unsigned long ppc_proc_freq;
arch/powerpc/kernel/exceptions-64s.S +20 -5
@@ -1491,6 +1491,8 @@ EXC_COMMON_BEGIN(decrementer_common) INT_DEFINE_BEGIN(hdecrementer) IVEC=0x980 IHSRR=EXC_HV + ISTACK=0 + IRECONCILE=0 IKVM_REAL=1 IKVM_VIRT=1 INT_DEFINE_END(hdecrementer)
@@ -1502,11 +1504,24 @@ EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80) GEN_INT_ENTRY hdecrementer, virt=1 EXC_VIRT_END(hdecrementer, 0x4980, 0x80) EXC_COMMON_BEGIN(hdecrementer_common) - GEN_COMMON hdecrementer - bl save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - bl hdec_interrupt - b ret_from_except + __GEN_COMMON_ENTRY hdecrementer + /* + * Hypervisor decrementer interrupts not caught by the KVM test + * shouldn't occur but are sometimes left pending on exit from a KVM + * guest. We don't need to do anything to clear them, as they are + * edge-triggered. + * + * Be careful to avoid touching the kernel stack. + */ + ld r10,PACA_EXGEN+EX_CTR(r13) + mtctr r10 + mtcrf 0x80,r9 + ld r9,PACA_EXGEN+EX_R9(r13) + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) + ld r13,PACA_EXGEN+EX_R13(r13) + HRFI_TO_KERNEL GEN_KVM hdecrementer
arch/powerpc/kernel/time.c +0 -9
@@ -663,15 +663,6 @@ void timer_broadcast_interrupt(void) }#endif -/* -* Hypervisor decrementer interrupts shouldn't occur but are sometimes -* left pending on exit from a KVM guest. We don't need to do anything -* to clear them, as they are edge-triggered. -*/ -void hdec_interrupt (struct pt_regs *regs) -{ -} -#ifdef CONFIG_SUSPEND static void generic_suspend_disable_irqs (void ) {
Signature · 1 line
2.23.0
PATCH v2 17/35 powerpc/64s/exception: re-inline some handlers
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
The reduction in interrupt entry size allows some handlers to be re-inlined.
--- arch/powerpc/kernel/exceptions-64s.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +3 -3
@@ -1186,7 +1186,7 @@ INT_DEFINE_BEGIN(data_access) INT_DEFINE_END(data_access) EXC_REAL_BEGIN(data_access, 0x300, 0x80) - GEN_INT_ENTRY data_access, virt=0, ool=1 + GEN_INT_ENTRY data_access, virt=0 EXC_REAL_END(data_access, 0x300, 0x80) EXC_VIRT_BEGIN(data_access, 0x4300, 0x80) GEN_INT_ENTRY data_access, virt=1
@@ -1216,7 +1216,7 @@ INT_DEFINE_BEGIN(data_access_slb) INT_DEFINE_END(data_access_slb) EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80) - GEN_INT_ENTRY data_access_slb, virt=0, ool=1 + GEN_INT_ENTRY data_access_slb, virt=0 EXC_REAL_END(data_access_slb, 0x380, 0x80) EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80) GEN_INT_ENTRY data_access_slb, virt=1
@@ -1472,7 +1472,7 @@ INT_DEFINE_BEGIN(decrementer) INT_DEFINE_END(decrementer) EXC_REAL_BEGIN(decrementer, 0x900, 0x80) - GEN_INT_ENTRY decrementer, virt=0, ool=1 + GEN_INT_ENTRY decrementer, virt=0 EXC_REAL_END(decrementer, 0x900, 0x80) EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80) GEN_INT_ENTRY decrementer, virt=1
Signature · 1 line
2.23.0
PATCH v2 18/35 powerpc/64s/exception: Clean up SRR specifiers
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
Remove more magic numbers and replace with nicely named bools.
--- arch/powerpc/kernel/exceptions-64s.S | 68 +++++++++++++--------------- 1 file changed, 32 insertions(+), 36 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +32 -36
@@ -105,11 +105,6 @@ name: ori reg,reg,(ABS_ADDR(label))@l; \ addis reg,reg,(ABS_ADDR(label))@h -/* Exception register prefixes */ -#define EXC_HV_OR_STD 2 /* depends on HVMODE */ -#define EXC_HV 1 -#define EXC_STD 0 - /* * Branch to label using its 0xC000 address. This results in instruction * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
@@ -128,6 +123,7 @@ name: */ #define IVEC .L_IVEC_\name\() #define IHSRR .L_IHSRR_\name\() +#define IHSRR_IF_HVMODE .L_IHSRR_IF_HVMODE_\name\() #define IAREA .L_IAREA_\name\() #define IVIRT .L_IVIRT_\name\() #define IISIDE .L_IISIDE_\name\()
@@ -159,7 +155,10 @@ do_define_int n .error "IVEC not defined" .endif .ifndef IHSRR - IHSRR=EXC_STD + IHSRR=0 + .endif + .ifndef IHSRR_IF_HVMODE + IHSRR_IF_HVMODE=0 .endif .ifndef IAREA IAREA=PACA_EXGEN
@@ -257,7 +256,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) ld r9,IAREA+EX_R9(r13) ld r10,IAREA+EX_R10(r13) /* HSRR variants have the 0x2 bit added to their trap number */ - .if IHSRR == EXC_HV_OR_STD + .if IHSRR_IF_HVMODE BEGIN_FTR_SECTION ori r12,r12,(IVEC + 0x2) FTR_SECTION_ELSE
@@ -278,7 +277,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) ld r10,IAREA+EX_R10(r13) ld r11,IAREA+EX_R11(r13) ld r12,IAREA+EX_R12(r13) - .if IHSRR == EXC_HV_OR_STD + .if IHSRR_IF_HVMODE BEGIN_FTR_SECTION b kvmppc_skip_Hinterrupt FTR_SECTION_ELSE
@@ -403,7 +402,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) stw r10,IAREA+EX_DSISR(r13) .endif - .if IHSRR == EXC_HV_OR_STD + .if IHSRR_IF_HVMODE BEGIN_FTR_SECTION mfspr r11,SPRN_HSRR0 /* save HSRR0 */ mfspr r12,SPRN_HSRR1 /* and HSRR1 */
@@ -485,7 +484,7 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt) .abort "Bad maskable vector" .endif - .if IHSRR == EXC_HV_OR_STD + .if IHSRR_IF_HVMODE BEGIN_FTR_SECTION bne masked_Hinterrupt FTR_SECTION_ELSE
@@ -618,12 +617,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) * Restore all registers including H/SRR0/1 saved in a stack frame of a * standard exception. */ -.macro EXCEPTION_RESTORE_REGS hsrr +.macro EXCEPTION_RESTORE_REGS hsrr=0 /* Move original SRR0 and SRR1 into the respective regs */ ld r9,_MSR(r1) - .if \hsrr == EXC_HV_OR_STD - .error "EXC_HV_OR_STD Not implemented for EXCEPTION_RESTORE_REGS" - .endif .if \hsrr mtspr SPRN_HSRR1,r9 .else
@@ -898,7 +894,7 @@ EXC_COMMON_BEGIN(system_reset_common) ld r10,SOFTE(r1) stb r10,PACAIRQSOFTMASK(r13) - EXCEPTION_RESTORE_REGS EXC_STD + EXCEPTION_RESTORE_REGS RFI_TO_USER_OR_KERNEL GEN_KVM system_reset
@@ -952,7 +948,7 @@ TRAMP_REAL_BEGIN(machine_check_fwnmi) lhz r12,PACA_IN_MCE(r13); \ subi r12,r12,1; \ sth r12,PACA_IN_MCE(r13); \ - EXCEPTION_RESTORE_REGS EXC_STD + EXCEPTION_RESTORE_REGS EXC_COMMON_BEGIN(machine_check_early_common) /*
@@ -1321,7 +1317,7 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) INT_DEFINE_BEGIN(hardware_interrupt) IVEC=0x500 - IHSRR=EXC_HV_OR_STD + IHSRR_IF_HVMODE=1 IMASK=IRQS_DISABLED IKVM_REAL=1 IKVM_VIRT=1
@@ -1490,7 +1486,7 @@ EXC_COMMON_BEGIN(decrementer_common) INT_DEFINE_BEGIN(hdecrementer) IVEC=0x980 - IHSRR=EXC_HV + IHSRR=1 ISTACK=0 IRECONCILE=0 IKVM_REAL=1
@@ -1732,7 +1728,7 @@ EXC_COMMON_BEGIN(single_step_common) INT_DEFINE_BEGIN(h_data_storage) IVEC=0xe00 - IHSRR=EXC_HV + IHSRR=1 IDAR=1 IDSISR=1 IKVM_SKIP=1
@@ -1764,7 +1760,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX) INT_DEFINE_BEGIN(h_instr_storage) IVEC=0xe20 - IHSRR=EXC_HV + IHSRR=1 IKVM_REAL=1 IKVM_VIRT=1 INT_DEFINE_END(h_instr_storage)
@@ -1787,7 +1783,7 @@ EXC_COMMON_BEGIN(h_instr_storage_common) INT_DEFINE_BEGIN(emulation_assist) IVEC=0xe40 - IHSRR=EXC_HV + IHSRR=1 IKVM_REAL=1 IKVM_VIRT=1 INT_DEFINE_END(emulation_assist)
@@ -1815,7 +1811,7 @@ EXC_COMMON_BEGIN(emulation_assist_common) */ INT_DEFINE_BEGIN(hmi_exception_early) IVEC=0xe60 - IHSRR=EXC_HV + IHSRR=1 IREALMODE_COMMON=1 ISTACK=0 IRECONCILE=0
@@ -1825,7 +1821,7 @@ INT_DEFINE_END(hmi_exception_early) INT_DEFINE_BEGIN(hmi_exception) IVEC=0xe60 - IHSRR=EXC_HV + IHSRR=1 IMASK=IRQS_DISABLED IKVM_REAL=1 INT_DEFINE_END(hmi_exception)
@@ -1847,7 +1843,7 @@ EXC_COMMON_BEGIN(hmi_exception_early_common) cmpdi cr0,r3,0 bne 1f - EXCEPTION_RESTORE_REGS EXC_HV + EXCEPTION_RESTORE_REGS hsrr=1 HRFI_TO_USER_OR_KERNEL 1:
@@ -1855,7 +1851,7 @@ EXC_COMMON_BEGIN(hmi_exception_early_common) * Go to virtual mode and pull the HMI event information from * firmware. */ - EXCEPTION_RESTORE_REGS EXC_HV + EXCEPTION_RESTORE_REGS hsrr=1 GEN_INT_ENTRY hmi_exception, virt=0 GEN_KVM hmi_exception_early
@@ -1874,7 +1870,7 @@ EXC_COMMON_BEGIN(hmi_exception_common) INT_DEFINE_BEGIN(h_doorbell) IVEC=0xe80 - IHSRR=EXC_HV + IHSRR=1 IMASK=IRQS_DISABLED IKVM_REAL=1 IKVM_VIRT=1
@@ -1903,7 +1899,7 @@ EXC_COMMON_BEGIN(h_doorbell_common) INT_DEFINE_BEGIN(h_virt_irq) IVEC=0xea0 - IHSRR=EXC_HV + IHSRR=1 IMASK=IRQS_DISABLED IKVM_REAL=1 IKVM_VIRT=1
@@ -2073,7 +2069,7 @@ EXC_COMMON_BEGIN(facility_unavailable_common) INT_DEFINE_BEGIN(h_facility_unavailable) IVEC=0xf80 - IHSRR=EXC_HV + IHSRR=1 IKVM_REAL=1 IKVM_VIRT=1 INT_DEFINE_END(h_facility_unavailable)
@@ -2109,7 +2105,7 @@ EXC_VIRT_NONE(0x5100, 0x100) #ifdef CONFIG_CBE_RAS INT_DEFINE_BEGIN(cbe_system_error) IVEC=0x1200 - IHSRR=EXC_HV + IHSRR=1 IKVM_SKIP=1 IKVM_REAL=1 INT_DEFINE_END(cbe_system_error)
@@ -2160,8 +2156,8 @@ EXC_VIRT_NONE(0x5400, 0x100) INT_DEFINE_BEGIN(denorm_exception) IVEC=0x1500 - IHSRR=EXC_HV - IBRANCH_TO_COMMON=0 + IHSRR=1 + IBRANCH_COMMON=0 IKVM_REAL=1 INT_DEFINE_END(denorm_exception)
@@ -2269,7 +2265,7 @@ EXC_COMMON_BEGIN(denorm_exception_common) #ifdef CONFIG_CBE_RAS INT_DEFINE_BEGIN(cbe_maintenance) IVEC=0x1600 - IHSRR=EXC_HV + IHSRR=1 IKVM_SKIP=1 IKVM_REAL=1 INT_DEFINE_END(cbe_maintenance)
@@ -2321,7 +2317,7 @@ EXC_COMMON_BEGIN(altivec_assist_common) #ifdef CONFIG_CBE_RAS INT_DEFINE_BEGIN(cbe_thermal) IVEC=0x1800 - IHSRR=EXC_HV + IHSRR=1 IKVM_SKIP=1 IKVM_REAL=1 INT_DEFINE_END(cbe_thermal)
@@ -2384,7 +2380,7 @@ EXC_COMMON_BEGIN(soft_nmi_common) * - Else it is one of PACA_IRQ_MUST_HARD_MASK, so hard disable and return. * This is called with r10 containing the value to OR to the paca field. */ -.macro MASKED_INTERRUPT hsrr +.macro MASKED_INTERRUPT hsrr=0 .if \hsrr masked_Hinterrupt: .else
@@ -2531,8 +2527,8 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback) hrfid USE_TEXT_SECTION() - MASKED_INTERRUPT EXC_STD - MASKED_INTERRUPT EXC_HV + MASKED_INTERRUPT + MASKED_INTERRUPT hsrr=1 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER kvmppc_skip_interrupt:
Signature · 1 line
2.23.0
PATCH v2 19/35 powerpc/64s/exception: add more comments for interrupt handlers
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
A few of the non-standard handlers are left uncommented. Some more description could be added to some.
--- arch/powerpc/kernel/exceptions-64s.S | 391 ++++++++++++++++++++++++--- 1 file changed, 353 insertions(+), 38 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +353 -38
@@ -121,26 +121,26 @@ name: /* * Interrupt code generation macros */ -#define IVEC .L_IVEC_\name\() -#define IHSRR .L_IHSRR_\name\() -#define IHSRR_IF_HVMODE .L_IHSRR_IF_HVMODE_\name\() -#define IAREA .L_IAREA_\name\() -#define IVIRT .L_IVIRT_\name\() -#define IISIDE .L_IISIDE_\name\() -#define IDAR .L_IDAR_\name\() -#define IDSISR .L_IDSISR_\name\() -#define ISET_RI .L_ISET_RI_\name\() -#define IBRANCH_TO_COMMON .L_IBRANCH_TO_COMMON_\name\() -#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() -#define IMASK .L_IMASK_\name\() -#define IKVM_SKIP .L_IKVM_SKIP_\name\() -#define IKVM_REAL .L_IKVM_REAL_\name\() +#define IVEC .L_IVEC_\name\() /* Interrupt vector address */ +#define IHSRR .L_IHSRR_\name\() /* Sets SRR or HSRR registers */ +#define IHSRR_IF_HVMODE .L_IHSRR_IF_HVMODE_\name\() /* HSRR if HV else SRR */ +#define IAREA .L_IAREA_\name\() /* PACA save area */ +#define IVIRT .L_IVIRT_\name\() /* Has virt mode entry point */ +#define IISIDE .L_IISIDE_\name\() /* Uses SRR0/1 not DAR/DSISR */ +#define IDAR .L_IDAR_\name\() /* Uses DAR (or SRR0) */ +#define IDSISR .L_IDSISR_\name\() /* Uses DSISR (or SRR1) */ +#define ISET_RI .L_ISET_RI_\name\() /* Run common code w/ MSR[RI]=1 */ +#define IBRANCH_TO_COMMON .L_IBRANCH_TO_COMMON_\name\() /* ENTRY branch to common */ +#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() /* Common runs in realmode */ +#define IMASK .L_IMASK_\name\() /* IRQ soft-mask bit */ +#define IKVM_SKIP .L_IKVM_SKIP_\name\() /* Generate KVM skip handler */ +#define IKVM_REAL .L_IKVM_REAL_\name\() /* Real entry tests KVM */ #define __IKVM_REAL(name) .L_IKVM_REAL_ ## name -#define IKVM_VIRT .L_IKVM_VIRT_\name\() -#define ISTACK .L_ISTACK_\name\() +#define IKVM_VIRT .L_IKVM_VIRT_\name\() /* Virt entry tests KVM */ +#define ISTACK .L_ISTACK_\name\() /* Set regular kernel stack */ #define __ISTACK(name) .L_ISTACK_ ## name -#define IRECONCILE .L_IRECONCILE_\name\() -#define IKUAP .L_IKUAP_\name\() +#define IRECONCILE .L_IRECONCILE_\name\() /* Do RECONCILE_IRQ_STATE */ +#define IKUAP .L_IKUAP_\name\() /* Do KUAP lock */ #define INT_DEFINE_BEGIN(n) \ .macro int_define_ ## n name
@@ -759,6 +759,39 @@ __start_interrupts: EXC_VIRT_NONE(0x4000, 0x100) +/** + * Interrupt 0x100 - System Reset Interrupt (SRESET aka NMI). + * This is a non-maskable, asynchronous interrupt always taken in real-mode. + * It is caused by: + * - Wake from power-saving state, on powernv. + * - An NMI from another CPU, triggered by firmware or hypercall. + * - As crash/debug signal injected from BMC, firmware or hypervisor. + * + * Handling: + * Power-save wakeup is the only performance critical path, so this is + * determined quickly as possible first. In this case volatile registers + * can be discarded and SPRs like CFAR don't need to be read. + * + * If not a powersave wakeup, then it's run as a regular interrupt, however + * it uses its own stack and PACA save area to preserve the regular kernel + * environment for debugging. + * + * This interrupt is not maskable, so triggering it when MSR[RI] is clear, + * or SCRATCH0 is in use, etc. may cause a crash. It's also not entirely + * correct to switch to virtual mode to run the regular interrupt handler + * because it might be interrupted when the MMU is in a bad state (e.g., SLB + * is clear). + * + * FWNMI: + * PAPR specifies a "fwnmi" facility which sends the sreset to a different + * entry point with a different register set up. Some hypervisors will + * send the sreset to 0x100 in the guest if it is not fwnmi capable. + * + * KVM: + * Unlike most SRR interrupts, this may be taken by the host while executing + * in a guest, so a KVM test is required. KVM will pull the CPU out of guest + * mode and then raise the sreset. + */ INT_DEFINE_BEGIN(system_reset) IVEC=0x100 IAREA=PACA_EXNMI
@@ -834,6 +867,7 @@ TRAMP_REAL_BEGIN(system_reset_idle_wake) * Vectors for the FWNMI option. Share common code. */ TRAMP_REAL_BEGIN(system_reset_fwnmi) + /* XXX: fwnmi guest could run a nested/PR guest, so why no test? */ __IKVM_REAL(system_reset)=0 GEN_INT_ENTRY system_reset, virt=0
@@ -900,6 +934,44 @@ EXC_COMMON_BEGIN(system_reset_common) GEN_KVM system_reset +/** + * Interrupt 0x200 - Machine Check Interrupt (MCE). + * This is a non-maskable interrupt always taken in real-mode. It can be + * synchronous or asynchronous, caused by hardware or software, and it may be + * taken in a power-saving state. + * + * Handling: + * Similarly to system reset, this uses its own stack and PACA save area, + * the difference is re-entrancy is allowed on the machine check stack. + * + * machine_check_early is run in real mode, and carefully decodes the + * machine check and tries to handle it (e.g., flush the SLB if there was an + * error detected there), determines if it was recoverable and logs the + * event. + * + * Then, depending on the execution context when the interrupt is taken, there + * are 3 main actions: + * - Executing in kernel mode. The event is queued with irq_work, which means + * it is handled when it is next safe to do so (i.e., the kernel has enabled + * interrupts), which could be immediately when the interrupt returns. This + * avoids nasty issues like switching to virtual mode when the MMU is in a + * bad state, or when executing OPAL code. (SRESET is exposed to such issues, + * but it has different priorities). Check to see if the CPU was in power + * save, and return via the wake up code if it was. + * + * - Executing in user mode. machine_check_exception is run like a normal + * interrupt handler, which processes the data generated by the early handler. + * + * - Executing in guest mode. The interrupt is run with its KVM test, and + * branches to KVM to deal with. KVM may queue the event for the host + * to report later. + * + * This interrupt is not maskable, so if it triggers when MSR[RI] is clear, + * or SCRATCH0 is in use, it may cause a crash. + * + * KVM: + * See SRESET. + */ INT_DEFINE_BEGIN(machine_check_early) IVEC=0x200 IAREA=PACA_EXMC
@@ -1159,19 +1231,28 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) /** - * 0x300 - Data Storage Interrupt (DSI) - * This interrupt is generated due to a data access which does not have a valid - * page table entry with permissions to allow the data access to be performed. - * DAWR matches also fault here, as do RC updates, and minor misc errors e.g., - * copy/paste, AMO, certain invalid CI accesses, etc. + * Interrupt 0x300 - Data Storage Interrupt (DSI). + * This is a synchronous interrupt generated due to a data access exception, + * e.g., a load orstore which does not have a valid page table entry with + * permissions. DAWR matches also fault here, as do RC updates, and minor misc + * errors e.g., copy/paste, AMO, certain invalid CI accesses, etc. + * + * Handling: + * - Hash MMU + * Go to do_hash_page first to see if the HPT can be filled from an entry in + * the Linux page table. Hash faults can hit in kernel mode in a fairly + * arbitrary state (e.g., interrupts disabled, locks held) when accessing + * "non-bolted" regions, e.g., vmalloc space. However these should always be + * backed by Linux page tables. * - * This interrupt is delivered to the guest (HV bit unchanged). + * If none is found, do a Linux page fault. Linux page faults can happen in + * kernel mode due to user copy operations of course. * - * Linux HPT responds by first attempting to refill the hash table from the - * Linux page table, then going to a full page fault if the Linux page table - * entry was insufficient. RPT goes straight to full page fault. + * - Radix MMU + * The hardware loads from the Linux page table directly, so a fault goes + * immediately to Linux page fault. * - * PR KVM ...? + * Conditions like DAWR match are handled on the way in to Linux page fault. */ INT_DEFINE_BEGIN(data_access) IVEC=0x300
@@ -1202,6 +1283,24 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) GEN_KVM data_access +/** + * Interrupt 0x380 - Data Segment Interrupt (DSLB). + * This is a synchronous interrupt in response to an MMU fault missing SLB + * entry for HPT, or an address outside RPT translation range. + * + * Handling: + * - HPT: + * This refills the SLB, or reports an access fault similarly to a bad page + * fault. When coming from user-mode, the SLB handler may access any kernel + * data, though it may itself take a DSLB. When coming from kernel mode, + * recursive faults must be avoided so access is restricted to the kernel + * image text/data, kernel stack, and any data allocated below + * ppc64_bolted_size (first segment). The kernel handler must avoid stomping + * on user-handler data structures. + * + * A dedicated save area EXSLB is used (XXX: but it actually need not be + * these days, we could use EXGEN). + */ INT_DEFINE_BEGIN(data_access_slb) IVEC=0x380 IAREA=PACA_EXSLB
@@ -1244,6 +1343,15 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) GEN_KVM data_access_slb +/** + * Interrupt 0x400 - Instruction Storage Interrupt (ISI). + * This is a synchronous interrupt in response to an MMU fault due to an + * instruction fetch. + * + * Handling: + * Similar to DSI, though in response to fetch. The faulting address is found + * in SRR0 (rather than DAR), and status in SRR1 (rather than DSISR). + */ INT_DEFINE_BEGIN(instruction_access) IVEC=0x400 IISIDE=1
@@ -1273,6 +1381,15 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) GEN_KVM instruction_access +/** + * Interrupt 0x480 - Instruction Segment Interrupt (ISLB). + * This is a synchronous interrupt in response to an MMU fault due to an + * instruction fetch. + * + * Handling: + * Similar to DSLB, though in response to fetch. The faulting address is found + * in SRR0 (rather than DAR). + */ INT_DEFINE_BEGIN(instruction_access_slb) IVEC=0x480 IAREA=PACA_EXSLB
@@ -1315,6 +1432,29 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) GEN_KVM instruction_access_slb +/** + * Interrupt 0x500 - External Interrupt. + * This is an asynchronous maskable interrupt in response to an "external + * exception" from the interrupt controller or hypervisor (e.g., device + * interrupt). It is maskable in hardware by clearing MSR[EE], and + * soft-maskable with IRQS_DISABLED mask (i.e., local_irq_disable()). + * + * When running in HV mode, Linux sets up the LPCR[LPES] bit such that + * interrupts are delivered with HSRR registers, guests use SRRs, which + * reqiures IHSRR_IF_HVMODE. + * + * On bare metal POWER9 and later, Linux sets the LPCR[HVICE] bit such that + * external interrupts are delivered as Hypervisor Virtualization Interrupts + * rather than External Interrupts. + * + * Handling: + * This calls into Linux IRQ handler. NVGPRs are not saved to reduce overhead, + * because registers at the time of the interrupt are not so important as it is + * asynchronous. + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, and clear MSR[EE] in the interrupted context. + */ INT_DEFINE_BEGIN(hardware_interrupt) IVEC=0x500 IHSRR_IF_HVMODE=1
@@ -1340,6 +1480,10 @@ EXC_COMMON_BEGIN(hardware_interrupt_common) GEN_KVM hardware_interrupt +/** + * Interrupt 0x600 - Alignment Interrupt + * This is a synchronous interrupt in response to data alignment fault. + */ INT_DEFINE_BEGIN(alignment) IVEC=0x600 IDAR=1
@@ -1363,6 +1507,15 @@ EXC_COMMON_BEGIN(alignment_common) GEN_KVM alignment +/** + * Interrupt 0x700 - Program Interrupt (program check). + * This is a synchronous interrupt in response to various instruction faults: + * traps, privilege errors, TM errors, floating point exceptions. + * + * Handling: + * This interrupt may use the "emergency stack" in some cases when being taken + * from kernel context, which complicates handling. + */ INT_DEFINE_BEGIN(program_check) IVEC=0x700 IKVM_REAL=1
@@ -1416,6 +1569,15 @@ EXC_COMMON_BEGIN(program_check_common) GEN_KVM program_check +/* + * Interrupt 0x800 - Floating-Point Unavailable Interrupt. + * This is a synchronous interrupt in response to executing an fp instruction + * with MSR[FP]=0. + * + * Handling: + * This will load FP registers and enable the FP bit if coming from userspace, + * otherwise report a bad kernel use of FP. + */ INT_DEFINE_BEGIN(fp_unavailable) IVEC=0x800 IRECONCILE=0
@@ -1461,6 +1623,23 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) GEN_KVM fp_unavailable +/** + * Interrupt 0x900 - Decrementer Interrupt. + * This is an asynchronous interrupt in response to a decrementer exception + * (e.g., DEC has wrapped below zero). It is maskable in hardware by clearing + * MSR[EE], and soft-maskable with IRQS_DISABLED mask (i.e., + * local_irq_disable()). + * + * Handling: + * This calls into Linux timer handler. NVGPRs are not saved (see 0x500). + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, and bump the decrementer to a high value, leaving MSR[EE] enabled + * in the interrupted context. + * If PPC_WATCHDOG is configured, the soft masked handler will actually set + * things back up to run soft_nmi_interrupt as a regular interrupt handler + * on the emergency stack. + */ INT_DEFINE_BEGIN(decrementer) IVEC=0x900 IMASK=IRQS_DISABLED
@@ -1484,6 +1663,16 @@ EXC_COMMON_BEGIN(decrementer_common) GEN_KVM decrementer +/** + * Interrupt 0x980 - Hypervisor Decrementer Interrupt. + * This is an asynchronous interrupt, similar to 0x900 but for the HDEC + * register. + * + * Handling: + * Linux does not use this outside KVM where it's used to keep a host timer + * while the guest is given control of DEC. It should normally be caught by + * the KVM test and routed there. + */ INT_DEFINE_BEGIN(hdecrementer) IVEC=0x980 IHSRR=1
@@ -1522,6 +1711,20 @@ EXC_COMMON_BEGIN(hdecrementer_common) GEN_KVM hdecrementer +/** + * Interrupt 0xa00 - Directed Privileged Doorbell Interrupt. + * This is an asynchronous interrupt in response to a msgsndp doorbell. + * It is maskable in hardware by clearing MSR[EE], and soft-maskable with + * IRQS_DISABLED mask (i.e., local_irq_disable()). + * + * Handling: + * Guests may use this for IPIs between threads in a core if the + * hypervisor supports it. NVGPRS are not saved (see 0x500). + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, leaving MSR[EE] enabled in the interrupted context because the + * doorbells are edge triggered. + */ INT_DEFINE_BEGIN(doorbell_super) IVEC=0xa00 IMASK=IRQS_DISABLED
@@ -1552,16 +1755,20 @@ EXC_COMMON_BEGIN(doorbell_super_common) EXC_REAL_NONE(0xb00, 0x100) EXC_VIRT_NONE(0x4b00, 0x100) -/* - * system call / hypercall (0xc00, 0x4c00) - * - * The system call exception is invoked with "sc 0" and does not alter HV bit. - * - * The hypercall is invoked with "sc 1" and sets HV=1. +/** + * Interrupt 0xc00 - System Call Interrupt (syscall, hcall). + * This is a synchronous interrupt invoked with the "sc" instruction. The + * system call is invoked with "sc 0" and does not alter the HV bit, so it + * is directed to the currently running OS. The hypercall is invoked with + * "sc 1" and it sets HV=1, so it elevates to hypervisor. * * In HPT, sc 1 always goes to 0xc00 real mode. In RADIX, sc 1 can go to * 0x4c00 virtual mode. * + * Handling: + * If the KVM test fires then it was due to a hypercall and is accordingly + * routed to KVM. Otherwise this executes a normal Linux system call. + * * Call convention: * * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
@@ -1705,6 +1912,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) #endif +/** + * Interrupt 0xd00 - Trace Interrupt. + * This is a synchronous interrupt in response to instruction step or + * breakpoint faults. + */ INT_DEFINE_BEGIN(single_step) IVEC=0xd00 IKVM_REAL=1
@@ -1726,6 +1938,18 @@ EXC_COMMON_BEGIN(single_step_common) GEN_KVM single_step +/** + * Interrupt 0xe00 - Hypervisor Data Storage Interrupt (HDSI). + * This is a synchronous interrupt in response to an MMU fault caused by a + * guest data access. + * + * Handling: + * This should always get routed to KVM. In radix MMU mode, this is caused + * by a guest nested radix access that can't be performed due to the + * partition scope page table. In hash mode, this can be caused by guests + * running with translation disabled (virtual real mode) or with VPM enabled. + * KVM will update the page table structures or disallow the access. + */ INT_DEFINE_BEGIN(h_data_storage) IVEC=0xe00 IHSRR=1
@@ -1758,6 +1982,11 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX) GEN_KVM h_data_storage +/** + * Interrupt 0xe20 - Hypervisor Instruction Storage Interrupt (HISI). + * This is a synchronous interrupt in response to an MMU fault caused by a + * guest instruction fetch, similar to HDSI. + */ INT_DEFINE_BEGIN(h_instr_storage) IVEC=0xe20 IHSRR=1
@@ -1781,6 +2010,9 @@ EXC_COMMON_BEGIN(h_instr_storage_common) GEN_KVM h_instr_storage +/** + * Interrupt 0xe40 - Hypervisor Emulation Assistance Interrupt. + */ INT_DEFINE_BEGIN(emulation_assist) IVEC=0xe40 IHSRR=1
@@ -1804,10 +2036,29 @@ EXC_COMMON_BEGIN(emulation_assist_common) GEN_KVM emulation_assist -/* - * hmi_exception trampoline is a special case. It jumps to hmi_exception_early - * first, and then eventaully from there to the trampoline to get into virtual - * mode. +/** + * Interrupt 0xe60 - Hypervisor Maintenance Interrupt (HMI). + * This is an asynchronous interrupt caused by a Hypervisor Maintenance + * Exception. It is always taken in real mode but uses HSRR registers + * unlike SRESET and MCE. + * + * It is maskable in hardware by clearing MSR[EE], and partially soft-maskable + * with IRQS_DISABLED mask (i.e., local_irq_disable()). + * + * Handling: + * This is a special case, this is handled similarly to machine checks, with an + * initial real mode handler that is not soft-masked, which attempts to fix the + * problem. Then a regular handler which is soft-maskable and reports the + * problem. + * + * The emergency stack is used for the early real mode handler. + * + * XXX: unclear why MCE and HMI schemes could not be made common, e.g., + * either use soft-masking for the MCE, or use irq_work for the HMI. + * + * KVM: + * Unlike MCE, this calls into KVM without calling the real mode handler + * first. */ INT_DEFINE_BEGIN(hmi_exception_early) IVEC=0xe60
@@ -1868,6 +2119,11 @@ EXC_COMMON_BEGIN(hmi_exception_common) GEN_KVM hmi_exception +/** + * Interrupt 0xe80 - Directed Hypervisor Doorbell Interrupt. + * This is an asynchronous interrupt in response to a msgsnd doorbell. + * Similar to the 0xa00 doorbell but for host rather than guest. + */ INT_DEFINE_BEGIN(h_doorbell) IVEC=0xe80 IHSRR=1
@@ -1897,6 +2153,11 @@ EXC_COMMON_BEGIN(h_doorbell_common) GEN_KVM h_doorbell +/** + * Interrupt 0xea0 - Hypervisor Virtualization Interrupt. + * This is an asynchronous interrupt in response to an "external exception". + * Similar to 0x500 but for host only. + */ INT_DEFINE_BEGIN(h_virt_irq) IVEC=0xea0 IHSRR=1
@@ -1928,6 +2189,22 @@ EXC_REAL_NONE(0xee0, 0x20) EXC_VIRT_NONE(0x4ee0, 0x20) +/* + * Interrupt 0xf00 - Performance Monitor Interrupt (PMI, PMU). + * This is an asynchronous interrupt in response to a PMU exception. + * It is maskable in hardware by clearing MSR[EE], and soft-maskable with + * IRQS_PMI_DISABLED mask (NOTE: NOT local_irq_disable()). + * + * Handling: + * This calls into the perf subsystem. + * + * Like the watchdog soft-nmi, it appears an NMI interrupt to Linux, in that it + * runs under local_irq_disable. However it may be soft-masked in + * powerpc-specific code. + * + * If soft masked, the masked handler will note the pending interrupt for + * replay, and clear MSR[EE] in the interrupted context. + */ INT_DEFINE_BEGIN(performance_monitor) IVEC=0xf00 IMASK=IRQS_PMI_DISABLED
@@ -1951,6 +2228,12 @@ EXC_COMMON_BEGIN(performance_monitor_common) GEN_KVM performance_monitor +/** + * Interrupt 0xf20 - Vector Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing a vector (or altivec) instruction with MSR[VEC]=0. + * Similar to FP unavailable. + */ INT_DEFINE_BEGIN(altivec_unavailable) IVEC=0xf20 IRECONCILE=0
@@ -1999,6 +2282,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) GEN_KVM altivec_unavailable +/** + * Interrupt 0xf40 - VSX Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing a VSX instruction with MSR[VSX]=0. + * Similar to FP unavailable. + */ INT_DEFINE_BEGIN(vsx_unavailable) IVEC=0xf40 IRECONCILE=0
@@ -2046,6 +2335,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) GEN_KVM vsx_unavailable +/** + * Interrupt 0xf60 - Facility Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing an instruction without access to the facility that can be + * resolved by the OS (e.g., FSCR, MSR). + * Similar to FP unavailable. + */ INT_DEFINE_BEGIN(facility_unavailable) IVEC=0xf60 IKVM_REAL=1
@@ -2067,6 +2363,13 @@ EXC_COMMON_BEGIN(facility_unavailable_common) GEN_KVM facility_unavailable +/** + * Interrupt 0xf60 - Hypervisor Facility Unavailable Interrupt. + * This is a synchronous interrupt in response to + * executing an instruction without access to the facility that can only + * be resolved in HV mode (e.g., HFSCR). + * Similar to FP unavailable. + */ INT_DEFINE_BEGIN(h_facility_unavailable) IVEC=0xf80 IHSRR=1
@@ -2154,6 +2457,18 @@ EXC_COMMON_BEGIN(instruction_breakpoint_common) EXC_REAL_NONE(0x1400, 0x100) EXC_VIRT_NONE(0x5400, 0x100) +/** + * Interrupt 0x1500 - Soft Patch Interrupt + * + * Handling: + * This is an implementation specific interrupt which can be used for a + * range of exceptions. + * + * This interrupt handler is unique in that it runs the denormal assist + * code even for guests (and even in guest context) without going to KVM, + * for speed. POWER9 does not raise denorm exceptions, so this special case + * could be phased out in future to reduce special cases. + */ INT_DEFINE_BEGIN(denorm_exception) IVEC=0x1500 IHSRR=1
Signature · 1 line
2.23.0
PATCH v2 20/35 powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
Apart from SRESET, MCE, and syscall (hcall variant), the SRR type interrupts are not escalated to hypervisor mode, so delivered to the OS.
When running PR KVM, the OS is the hypervisor, and the guest runs with MSR[PR]=1, so these interrupts must test if a guest was running when interrupted. These tests are required at the real-mode entry points because the PR KVM host runs with LPCR[AIL]=0.
In HV KVM and nested HV KVM, the guest always receives these interrupts, so there is no need for the host to make this test. So remove the tests if PR KVM is not configured.
--- arch/powerpc/kernel/exceptions-64s.S | 65 ++++++++++++++++++++++++++-- 1 file changed, 62 insertions(+), 3 deletions(-)
arch/powerpc/kernel/exceptions-64s.S +62 -3
@@ -214,9 +214,36 @@ do_define_int n #ifdef CONFIG_KVM_BOOK3S_64_HANDLER #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE /* - * If hv is possible, interrupts come into to the hv version - * of the kvmppc_interrupt code, which then jumps to the PR handler, - * kvmppc_interrupt_pr, if the guest is a PR guest. + * All interrupts which set HSRR registers, as well as SRESET and MCE and + * syscall when invoked with "sc 1" switch to MSR[HV]=1 (HVMODE) to be taken, + * so they all generally need to test whether they were taken in guest context. + * + * Note: SRESET and MCE may also be sent to the guest by the hypervisor, and be + * taken with MSR[HV]=0. + * + * Interrupts which set SRR registers (with the above exceptions) do not + * elevate to MSR[HV]=1 mode, though most can be taken when running with + * MSR[HV]=1 (e.g., bare metal kernel and userspace). So these interrupts do + * not need to test whether a guest is running because they get delivered to + * the guest directly, including nested HV KVM guests. + * + * The exception is PR KVM, where the guest runs with MSR[PR]=1 and the host + * runs with MSR[HV]=0, so the host takes all interrupts on behalf of the + * guest. PR KVM runs with LPCR[AIL]=0 which causes interrupts to always be + * delivered to the real-mode entry point, therefore such interrupts only test + * KVM in their real mode handlers, and only when PR KVM is possible. + * + * Interrupts that are taken in MSR[HV]=0 and escalate to MSR[HV]=1 are always + * delivered in real-mode when the MMU is in hash mode because the MMU + * registers are not set appropriately to translate host addresses. In nested + * radix mode these can be delivered in virt-mode as the host translations are + * used implicitly (see: effective LPID, effective PID). + */ + +/* + * If an interrupt is taken while a guest is running, it is immediately routed + * to KVM to handle. If both HV and PR KVM arepossible, KVM interrupts go first + * to kvmppc_interrupt_hv, which handles the PR guest case. */ #define kvmppc_interrupt kvmppc_interrupt_hv #else
@@ -1258,8 +1285,10 @@ INT_DEFINE_BEGIN(data_access) IVEC=0x300 IDAR=1 IDSISR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_SKIP=1 IKVM_REAL=1 +#endif INT_DEFINE_END(data_access) EXC_REAL_BEGIN(data_access, 0x300, 0x80)
@@ -1306,8 +1335,10 @@ INT_DEFINE_BEGIN(data_access_slb) IAREA=PACA_EXSLB IRECONCILE=0 IDAR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_SKIP=1 IKVM_REAL=1 +#endif INT_DEFINE_END(data_access_slb) EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80)
@@ -1357,7 +1388,9 @@ INT_DEFINE_BEGIN(instruction_access) IISIDE=1 IDAR=1 IDSISR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(instruction_access) EXC_REAL_BEGIN(instruction_access, 0x400, 0x80)
@@ -1396,7 +1429,9 @@ INT_DEFINE_BEGIN(instruction_access_slb) IRECONCILE=0 IISIDE=1 IDAR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(instruction_access_slb) EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80)
@@ -1488,7 +1523,9 @@ INT_DEFINE_BEGIN(alignment) IVEC=0x600 IDAR=1 IDSISR=1 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(alignment) EXC_REAL_BEGIN(alignment, 0x600, 0x100)
@@ -1518,7 +1555,9 @@ EXC_COMMON_BEGIN(alignment_common) */ INT_DEFINE_BEGIN(program_check) IVEC=0x700 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(program_check) EXC_REAL_BEGIN(program_check, 0x700, 0x100)
@@ -1581,7 +1620,9 @@ EXC_COMMON_BEGIN(program_check_common) INT_DEFINE_BEGIN(fp_unavailable) IVEC=0x800 IRECONCILE=0 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(fp_unavailable) EXC_REAL_BEGIN(fp_unavailable, 0x800, 0x100)
@@ -1643,7 +1684,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) INT_DEFINE_BEGIN(decrementer) IVEC=0x900 IMASK=IRQS_DISABLED +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(decrementer) EXC_REAL_BEGIN(decrementer, 0x900, 0x80)
@@ -1728,7 +1771,9 @@ EXC_COMMON_BEGIN(hdecrementer_common) INT_DEFINE_BEGIN(doorbell_super) IVEC=0xa00 IMASK=IRQS_DISABLED +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(doorbell_super) EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100)
@@ -1919,7 +1964,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) */ INT_DEFINE_BEGIN(single_step) IVEC=0xd00 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(single_step) EXC_REAL_BEGIN(single_step, 0xd00, 0x100)
@@ -2208,7 +2255,9 @@ EXC_VIRT_NONE(0x4ee0, 0x20) INT_DEFINE_BEGIN(performance_monitor) IVEC=0xf00 IMASK=IRQS_PMI_DISABLED +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(performance_monitor) EXC_REAL_BEGIN(performance_monitor, 0xf00, 0x20)
@@ -2237,7 +2286,9 @@ EXC_COMMON_BEGIN(performance_monitor_common) INT_DEFINE_BEGIN(altivec_unavailable) IVEC=0xf20 IRECONCILE=0 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(altivec_unavailable) EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20)
@@ -2291,7 +2342,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) INT_DEFINE_BEGIN(vsx_unavailable) IVEC=0xf40 IRECONCILE=0 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(vsx_unavailable) EXC_REAL_BEGIN(vsx_unavailable, 0xf40, 0x20)
@@ -2344,7 +2397,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) */ INT_DEFINE_BEGIN(facility_unavailable) IVEC=0xf60 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(facility_unavailable) EXC_REAL_BEGIN(facility_unavailable, 0xf60, 0x20)
@@ -2434,8 +2489,10 @@ EXC_VIRT_NONE(0x5200, 0x100) INT_DEFINE_BEGIN(instruction_breakpoint) IVEC=0x1300 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_SKIP=1 IKVM_REAL=1 +#endif INT_DEFINE_END(instruction_breakpoint) EXC_REAL_BEGIN(instruction_breakpoint, 0x1300, 0x100)
@@ -2606,7 +2663,9 @@ EXC_VIRT_NONE(0x5600, 0x100) INT_DEFINE_BEGIN(altivec_assist) IVEC=0x1700 +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 +#endif INT_DEFINE_END(altivec_assist) EXC_REAL_BEGIN(altivec_assist, 0x1700, 0x100)
Signature · 1 line
2.23.0
PATCH v2 21/35 powerpc/64s/exception: soft nmi interrupt should not use ret_from_except
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
The soft nmi handler does not reconcile interrupt state, so it should not return via the normal ret_from_except path. Return like other NMIs, using the EXCEPTION_RESTORE_REGS macro.
This becomes important when the scv interrupt is implemented, which must handle soft-masked interrupts that have r13 set to something other than the PACA -- returning to kernel in this case must restore r13.
--- arch/powerpc/kernel/exceptions-64s.S | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
arch/powerpc/kernel/exceptions-64s.S +5 -1
@@ -2740,7 +2740,11 @@ EXC_COMMON_BEGIN(soft_nmi_common) bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl soft_nmi_interrupt - b ret_from_except + /* Clear MSR_RI before setting SRR0 and SRR1. */ + li r9,0 + mtmsrd r9,1 + EXCEPTION_RESTORE_REGS hsrr=0 + RFI_TO_KERNEL #endif /* CONFIG_PPC_WATCHDOG */
Signature · 1 line
2.23.0
PATCH v2 22/35 powerpc/64: system call remove non-volatile GPR save optimisation
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
powerpc has an optimisation where interrupts avoid saving the non-volatile (or callee saved) registers to the interrupt stack frame if they are not required.
Two problems with this are that an interrupt does not always know whether it will need non-volatiles; and if it does need them, they can only be saved from the entry-scoped asm code (because we don't control what the C compiler does with these registers).
system calls are the most difficult: some system calls always require all registers (e.g., fork, to copy regs into the child). Sometimes registers are only required under certain conditions (e.g., tracing, signal delivery). These cases require ugly logic in the call chains (e.g., ppc_fork), and require a lot of logic to be implemented in asm.
So remove the optimisation for system calls, and always save NVGPRs on entry. Modern high performance CPUs are not so sensitive, because the stores are dense in cache and can be hidden by other expensive work in the syscall path -- the null syscall selftests benchmark on POWER9 is not slowed (124.40ns before and 123.64ns after, i.e., within the noise).
Other interrupts retain the NVGPR optimisation for now.
--- arch/powerpc/kernel/entry_64.S | 72 +++++------------------- arch/powerpc/kernel/syscalls/syscall.tbl | 22 +++++--- 2 files changed, 28 insertions(+), 66 deletions(-)
arch/powerpc/kernel/entry_64.S +13 -59
@@ -98,13 +98,14 @@ END_BTB_FLUSH_SECTION std r11,_XER(r1) std r11,_CTR(r1) std r9,GPR13(r1) + SAVE_NVGPRS(r1) mflr r10 /* * This clears CR0.SO (bit 28), which is the error indication on * return from this system call. */ rldimi r2,r11,28,(63-28) - li r11,0xc01 + li r11,0xc00 std r10,_LINK(r1) std r11,_TRAP(r1) std r3,ORIG_GPR3(r1)
@@ -323,7 +324,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) /* Traced system call support */ .Lsyscall_dotrace: - bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_enter
@@ -408,7 +408,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ - bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_leave b ret_from_except
@@ -442,62 +441,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) _ASM_NOKPROBE_SYMBOL(system_call_common); _ASM_NOKPROBE_SYMBOL(system_call_exit); -/* Save non-volatile GPRs, if not already saved. */ -_GLOBAL(save_nvgprs) - ld r11,_TRAP(r1) - andi. r0,r11,1 - beqlr- - SAVE_NVGPRS(r1) - clrrdi r0,r11,1 - std r0,_TRAP(r1) - blr -_ASM_NOKPROBE_SYMBOL(save_nvgprs); - - -/* - * The sigsuspend and rt_sigsuspend system calls can call do_signal - * and thus put the process into the stopped state where we might - * want to examine its user state with ptrace. Therefore we need - * to save all the nonvolatile registers (r14 - r31) before calling - * the C code. Similarly, fork, vfork and clone need the full - * register state on the stack so that it can be copied to the child. - */ - -_GLOBAL(ppc_fork) - bl save_nvgprs - bl sys_fork - b .Lsyscall_exit - -_GLOBAL(ppc_vfork) - bl save_nvgprs - bl sys_vfork - b .Lsyscall_exit - -_GLOBAL(ppc_clone) - bl save_nvgprs - bl sys_clone - b .Lsyscall_exit - -_GLOBAL(ppc_clone3) - bl save_nvgprs - bl sys_clone3 - b .Lsyscall_exit - -_GLOBAL(ppc32_swapcontext) - bl save_nvgprs - bl compat_sys_swapcontext - b .Lsyscall_exit - -_GLOBAL(ppc64_swapcontext) - bl save_nvgprs - bl sys_swapcontext - b .Lsyscall_exit - -_GLOBAL(ppc_switch_endian) - bl save_nvgprs - bl sys_switch_endian - b .Lsyscall_exit - _GLOBAL(ret_from_fork) bl schedule_tail REST_NVGPRS(r1)
@@ -516,6 +459,17 @@ _GLOBAL(ret_from_kernel_thread) li r3,0 b .Lsyscall_exit +/* Save non-volatile GPRs, if not already saved. */ +_GLOBAL(save_nvgprs) + ld r11,_TRAP(r1) + andi. r0,r11,1 + beqlr- + SAVE_NVGPRS(r1) + clrrdi r0,r11,1 + std r0,_TRAP(r1) + blr +_ASM_NOKPROBE_SYMBOL(save_nvgprs); + #ifdef CONFIG_PPC_BOOK3S_64 #define FLUSH_COUNT_CACHE \
arch/powerpc/kernel/syscalls/syscall.tbl +15 -7
@@ -9,7 +9,9 @@ # 0 nospu restart_syscall sys_restart_syscall 1 nospu exit sys_exit -2 nospu fork ppc_fork +2 32 fork ppc_fork sys_fork +2 64 fork sys_fork +2 spu fork sys_ni_syscall 3 common read sys_read 4 common write sys_write 5 common open sys_open compat_sys_open
@@ -158,7 +160,9 @@ 119 32 sigreturn sys_sigreturn compat_sys_sigreturn 119 64 sigreturn sys_ni_syscall 119 spu sigreturn sys_ni_syscall -120 nospu clone ppc_clone +120 32 clone ppc_clone sys_clone +120 64 clone sys_clone +120 spu clone sys_ni_syscall 121 common setdomainname sys_setdomainname 122 common uname sys_newuname 123 common modify_ldt sys_ni_syscall
@@ -240,7 +244,9 @@ 186 spu sendfile sys_sendfile64 187 common getpmsg sys_ni_syscall 188 common putpmsg sys_ni_syscall -189 nospu vfork ppc_vfork +189 32 vfork ppc_vfork sys_vfork +189 64 vfork sys_vfork +189 spu vfork sys_ni_syscall 190 common ugetrlimit sys_getrlimit compat_sys_getrlimit 191 common readahead sys_readahead compat_sys_readahead 192 32 mmap2 sys_mmap2 compat_sys_mmap2
@@ -316,8 +322,8 @@ 248 32 clock_nanosleep sys_clock_nanosleep_time32 248 64 clock_nanosleep sys_clock_nanosleep 248 spu clock_nanosleep sys_clock_nanosleep -249 32 swapcontext ppc_swapcontext ppc32_swapcontext -249 64 swapcontext ppc64_swapcontext +249 32 swapcontext ppc_swapcontext compat_sys_swapcontext +249 64 swapcontext sys_swapcontext 249 spu swapcontext sys_ni_syscall 250 common tgkill sys_tgkill 251 32 utimes sys_utimes_time32
@@ -456,7 +462,7 @@ 361 common bpf sys_bpf 362 nospu execveat sys_execveat compat_sys_execveat 363 32 switch_endian sys_ni_syscall -363 64 switch_endian ppc_switch_endian +363 64 switch_endian sys_switch_endian 363 spu switch_endian sys_ni_syscall 364 common userfaultfd sys_userfaultfd 365 common membarrier sys_membarrier
@@ -516,4 +522,6 @@ 432 common fsmount sys_fsmount 433 common fspick sys_fspick 434 common pidfd_open sys_pidfd_open -435 nospu clone3 ppc_clone3 +435 32 clone3 ppc_clone3 sys_clone3 +435 64 clone3 sys_clone3 +435 spu clone3 sys_ni_syscall
Signature · 1 line
2.23.0
PATCH v2 23/35 powerpc/64: system call implement the bulk of the logic in C
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
System call entry and particularly exit code is beyond the limit of what is reasonable to implement in asm.
This conversion moves all conditional branches out of the asm code, except for the case that all GPRs should be restored at exit.
Null syscall test is about 5% faster after this patch, because the exit work is handled under local_irq_disable, and the hard mask and pending interrupt replay is handled after that, which avoids games with MSR.
v3:
- Fix !KUAP build [mpe]
- Fix BookE build/boot [mpe]
- Don't trace irqs with MSR[RI]=0
- Don't allow syscall_exit_prepare to be ftraced, because function graph tracing which traces exits barfs after the IRQ state is prepared for kernel exit.
- Fix BE syscall table to use normal function descriptors now that they are called from C.
- Comment syscall_exit_prepare.
--- arch/powerpc/include/asm/asm-prototypes.h | 11 - .../powerpc/include/asm/book3s/64/kup-radix.h | 14 +- arch/powerpc/include/asm/cputime.h | 24 ++ arch/powerpc/include/asm/hw_irq.h | 4 + arch/powerpc/include/asm/ptrace.h | 3 + arch/powerpc/include/asm/signal.h | 3 + arch/powerpc/include/asm/switch_to.h | 5 + arch/powerpc/include/asm/time.h | 3 + arch/powerpc/kernel/Makefile | 3 +- arch/powerpc/kernel/entry_64.S | 337 +++--------------- arch/powerpc/kernel/signal.h | 2 - arch/powerpc/kernel/syscall_64.c | 195 ++++++++++ arch/powerpc/kernel/systbl.S | 9 +- 13 files changed, 300 insertions(+), 313 deletions(-) create mode 100644 arch/powerpc/kernel/syscall_64.c
arch/powerpc/include/asm/asm-prototypes.h +0 -11
@@ -103,14 +103,6 @@ long sys_switch_endian(void); notrace unsigned int __check_irq_replay(void); void notrace restore_interrupts(void); -/* ptrace */ -long do_syscall_trace_enter (struct pt_regs *regs); -void do_syscall_trace_leave (struct pt_regs *regs); - -/* process */ -void restore_math (struct pt_regs *regs); -void restore_tm_state (struct pt_regs *regs); -/* prom_init (OpenFirmware) */ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long pp,
@@ -121,9 +113,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,void __init early_setup (unsigned long dt_ptr);void early_setup_secondary (void ); -/* time */ -void accumulate_stolen_time (void ); -/* misc runtime */ extern u64 __bswapdi2 (u64 );extern s64 __lshrdi3 (s64 ,int );
arch/powerpc/include/asm/book3s/64/kup-radix.h +13 -1
@@ -3,6 +3,7 @@#define _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H#include <linux/const.h> +#include <asm/reg.h> #define AMR_KUAP_BLOCK_READ UL(0x4000000000000000)#define AMR_KUAP_BLOCK_WRITE UL(0x8000000000000000)
@@ -56,7 +57,14 @@#ifdef CONFIG_PPC_KUAP -#include <asm/reg.h> +#include <asm/mmu.h> +#include <asm/ptrace.h> + +static inline void kuap_check_amr (void ) +{ +if (IS_ENABLED (CONFIG_PPC_KUAP_DEBUG ) &&mmu_has_feature (MMU_FTR_RADIX_KUAP )) +WARN_ON_ONCE (mfspr (SPRN_AMR ) !=AMR_KUAP_BLOCKED ); +}/* * We support individually allowing read or write, but we don't support nesting
@@ -101,6 +109,10 @@ static inline bool bad_kuap_fault(struct pt_regs *regs, bool is_write) (regs->kuap & (is_write ?AMR_KUAP_BLOCK_WRITE :AMR_KUAP_BLOCK_READ )), "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read"); } +#else /* CONFIG_PPC_KUAP */ +static inline void kuap_check_amr (void ) +{ +}#endif /* CONFIG_PPC_KUAP */ #endif /* __ASSEMBLY__ */
arch/powerpc/include/asm/cputime.h +24 -0
@@ -60,6 +60,30 @@ static inline void arch_vtime_task_switch(struct task_struct *prev) }#endif +static inline void account_cpu_user_entry (void ) +{ +unsigned long tb =mftb (); +struct cpu_accounting_data *acct =get_accounting (current); + + acct->utime += (tb - acct->starttime_user); + acct->starttime = tb; +} +static inline void account_cpu_user_exit (void ) +{ +unsigned long tb =mftb (); +struct cpu_accounting_data *acct =get_accounting (current); + + acct->stime += (tb - acct->starttime); + acct->starttime_user = tb; +} +#endif /* __KERNEL__ */ +#else /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ +static inline void account_cpu_user_entry (void ) +{ +} +static inline void account_cpu_user_exit (void ) +{ +}#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ #endif /* __POWERPC_CPUTIME_H */
arch/powerpc/include/asm/hw_irq.h +4 -0
@@ -228,9 +228,13 @@ static inline bool arch_irqs_disabled(void)#ifdef CONFIG_PPC_BOOK3E #define __hard_irq_enable () asm volatile("wrteei 1" : : : "memory")#define __hard_irq_disable () asm volatile("wrteei 0" : : : "memory") +#define __hard_EE_RI_disable () asm volatile("wrteei 0" : : : "memory") +#define __hard_RI_enable () do { } while (0)#else #define __hard_irq_enable () __mtmsrd(MSR_EE|MSR_RI, 1)#define __hard_irq_disable () __mtmsrd(MSR_RI, 1) +#define __hard_EE_RI_disable () __mtmsrd(0, 1) +#define __hard_RI_enable () __mtmsrd(MSR_RI, 1)#endif #define hard_irq_disable () do { \
arch/powerpc/include/asm/ptrace.h +3 -0
@@ -138,6 +138,9 @@ extern unsigned long profile_pc(struct pt_regs *regs);#define profile_pc (regs) instruction_pointer(regs)#endif +long do_syscall_trace_enter (struct pt_regs *regs); +void do_syscall_trace_leave (struct pt_regs *regs); +#define kernel_stack_pointer (regs) ((regs)->gpr[1])static inline int is_syscall_success (struct pt_regs *regs) {
arch/powerpc/include/asm/signal.h +3 -0
@@ -6,4 +6,7 @@#include <uapi/asm/signal.h> #include <uapi/asm/ptrace.h> +struct pt_regs ; +void do_notify_resume (struct pt_regs *regs,unsigned long thread_info_flags); +#endif /* _ASM_POWERPC_SIGNAL_H */
arch/powerpc/include/asm/switch_to.h +5 -0
@@ -5,6 +5,7 @@#ifndef _ASM_POWERPC_SWITCH_TO_H#define _ASM_POWERPC_SWITCH_TO_H +#include <linux/sched.h> #include <asm/reg.h> struct thread_struct ;
@@ -22,6 +23,10 @@ extern void switch_booke_debug_regs(struct debug_reg *new_debug);extern int emulate_altivec (struct pt_regs *); +void restore_math (struct pt_regs *regs); + +void restore_tm_state (struct pt_regs *regs); +extern void flush_all_to_thread (struct task_struct *);extern void giveup_all (struct task_struct *);
arch/powerpc/include/asm/time.h +3 -0
@@ -194,5 +194,8 @@ DECLARE_PER_CPU(u64, decrementers_next_tb);/* Convert timebase ticks to nanoseconds */ unsigned long long tb_to_ns (unsigned long long tb_ticks); +/* SPLPAR */ +void accumulate_stolen_time (void ); +#endif /* __KERNEL__ */ #endif /* __POWERPC_TIME_H */
arch/powerpc/kernel/Makefile +2 -1
@@ -52,7 +52,8 @@ obj-y := cputable.o ptrace.o syscalls.o \ of_platform.o prom_parse.o obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ - paca.o nvram_64.o firmware.o note.o + paca.o nvram_64.o firmware.o note.o \ + syscall_64.o obj-$(CONFIG_VDSO32) += vdso32/ obj-$(CONFIG_PPC_WATCHDOG) += watchdog.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
arch/powerpc/kernel/entry_64.S +45 -292
415 lines not on this page · raw message
arch/powerpc/kernel/signal.h +0 -2
@@ -10,8 +10,6 @@#ifndef _POWERPC_ARCH_SIGNAL_H#define _POWERPC_ARCH_SIGNAL_H -extern void do_notify_resume (struct pt_regs *regs,unsigned long thread_info_flags); -extern void __user *get_sigframe (struct ksignal *ksig,unsigned long sp,size_t frame_size,int is_32);
arch/powerpc/kernel/syscall_64.c new file +195 -0
195 lines not on this page · raw message
arch/powerpc/kernel/systbl.S +3 -6
@@ -16,25 +16,22 @@ #ifdef CONFIG_PPC64 .p2align 3 +#define __SYSCALL(nr, entry) .8byte entry +#else +#define __SYSCALL(nr, entry) .long entry #endif .globl sys_call_table sys_call_table: #ifdef CONFIG_PPC64 -#define __SYSCALL(nr, entry) .8byte DOTSYM(entry) #include <asm/syscall_table_64.h> -#undef __SYSCALL #else -#define __SYSCALL(nr, entry) .long entry #include <asm/syscall_table_32.h> -#undef __SYSCALL #endif #ifdef CONFIG_COMPAT .globl compat_sys_call_table compat_sys_call_table: #define compat_sys_sigsuspend sys_sigsuspend -#define __SYSCALL(nr, entry) .8byte DOTSYM(entry) #include <asm/syscall_table_c32.h> -#undef __SYSCALL #endif
Signature · 1 line
2.23.0
PATCH v2 24/35 powerpc/64s: interrupt return in C
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
Implement the bulk of interrupt return logic in C. The asm return code must handle a few cases: restoring full GPRs, and emulating stack store.
The asm return code is moved into 64e for now. The new logic has made allowance for 64e, but I don't have a full environment that works well to test it, and even booting in emulated qemu is not great for stress testing. 64e shouldn't be too far off working with this, given a bit more testing and auditing of the logic.
This is slightly faster on a POWER9 (page fault speed increases about 1.1%), probably due to reduced mtmsrd.
[ms: Move the FP restore functions to restore_math. They are not used anywhere else and when restore_math is not built gcc warns about them being unused.
Add asm/context_tracking.h include to exceptions-64e.S for SCHEDULE_USER definition.]
--- .../powerpc/include/asm/book3s/64/kup-radix.h | 10 + arch/powerpc/include/asm/switch_to.h | 6 + arch/powerpc/kernel/entry_64.S | 475 ++++-------------- arch/powerpc/kernel/exceptions-64e.S | 255 +++++++++- arch/powerpc/kernel/exceptions-64s.S | 119 ++--- arch/powerpc/kernel/process.c | 89 ++-- arch/powerpc/kernel/syscall_64.c | 157 +++++- arch/powerpc/kernel/vector.S | 2 +- 8 files changed, 623 insertions(+), 490 deletions(-)
arch/powerpc/include/asm/book3s/64/kup-radix.h +10 -0
@@ -60,6 +60,12 @@#include <asm/mmu.h> #include <asm/ptrace.h> +static inline void kuap_restore_amr (struct pt_regs *regs) +{ +if (mmu_has_feature (MMU_FTR_RADIX_KUAP )) +mtspr (SPRN_AMR , regs->kuap); +} +static inline void kuap_check_amr (void ) {if (IS_ENABLED (CONFIG_PPC_KUAP_DEBUG ) &&mmu_has_feature (MMU_FTR_RADIX_KUAP ))
@@ -110,6 +116,10 @@ static inline bool bad_kuap_fault(struct pt_regs *regs, bool is_write) "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read"); }#else /* CONFIG_PPC_KUAP */ +static inline void kuap_restore_amr (struct pt_regs *regs) +{ +} +static inline void kuap_check_amr (void ) { }
arch/powerpc/include/asm/switch_to.h +6 -0
@@ -23,7 +23,13 @@ extern void switch_booke_debug_regs(struct debug_reg *new_debug);extern int emulate_altivec (struct pt_regs *); +#ifdef CONFIG_PPC_BOOK3S_64 void restore_math (struct pt_regs *regs); +#else +static inline void restore_math (struct pt_regs *regs) +{ +} +#endif void restore_tm_state (struct pt_regs *regs);
arch/powerpc/kernel/entry_64.S +109 -366
530 lines not on this page · raw message
arch/powerpc/kernel/exceptions-64e.S +248 -7
277 lines not on this page · raw message
arch/powerpc/kernel/exceptions-64s.S +45 -74
449 lines not on this page · raw message
arch/powerpc/kernel/process.c +48 -41
122 lines not on this page · raw message
arch/powerpc/kernel/syscall_64.c +156 -1
173 lines not on this page · raw message
arch/powerpc/kernel/vector.S +1 -1
@@ -131,7 +131,7 @@ _GLOBAL(load_up_vsx) /* enable use of VSX after return */ oris r12,r12,MSR_VSX@h std r12,_MSR(r1) - b fast_exception_return + b fast_interrupt_return #endif /* CONFIG_VSX */
Signature · 1 line
2.23.0
PATCH v2 25/35 powerpc/64s/exception: remove lite interrupt return
In reply to Michal SuchanekFrom: Nicholas Piggin <[email protected]>
The difference between lite and regular returns is that the lite case restores all NVGPRs, whereas lite skips that. This is quite clumsy though, most interrupts want the NVGPRs saved for debugging, not to modify in the caller, so the NVGPRs restore is not necessary most of the time. Restore NVGPRs explicitly for one case that requires it, and move everything else over to avoiding the restore unless the interrupt return demands it (e.g., handling a signal).
--- arch/powerpc/kernel/entry_64.S | 4 ---- arch/powerpc/kernel/exceptions-64s.S | 21 +++++++++++---------- 2 files changed, 11 insertions(+), 14 deletions(-)
arch/powerpc/kernel/entry_64.S +0 -4
@@ -452,10 +452,6 @@ _GLOBAL(fast_interrupt_return) .balign IFETCH_ALIGN_BYTES _GLOBAL(interrupt_return) - REST_NVGPRS(r1) - - .balign IFETCH_ALIGN_BYTES -_GLOBAL(interrupt_return_lite) ld r4,_MSR(r1) andi. r0,r4,MSR_PR beq kernel_interrupt_return
arch/powerpc/kernel/exceptions-64s.S +11 -10
@@ -1507,7 +1507,7 @@ EXC_COMMON_BEGIN(hardware_interrupt_common) RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD bl do_IRQ - b interrupt_return_lite + b interrupt_return GEN_KVM hardware_interrupt
@@ -1694,7 +1694,7 @@ EXC_COMMON_BEGIN(decrementer_common) RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD bl timer_interrupt - b interrupt_return_lite + b interrupt_return GEN_KVM decrementer
@@ -1785,7 +1785,7 @@ EXC_COMMON_BEGIN(doorbell_super_common) #else bl unknown_exception #endif - b interrupt_return_lite + b interrupt_return GEN_KVM doorbell_super
@@ -2183,7 +2183,7 @@ EXC_COMMON_BEGIN(h_doorbell_common) #else bl unknown_exception #endif - b interrupt_return_lite + b interrupt_return GEN_KVM h_doorbell
@@ -2213,7 +2213,7 @@ EXC_COMMON_BEGIN(h_virt_irq_common) RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD bl do_IRQ - b interrupt_return_lite + b interrupt_return GEN_KVM h_virt_irq
@@ -2260,7 +2260,7 @@ EXC_COMMON_BEGIN(performance_monitor_common) RUNLATCH_ON addi r3,r1,STACK_FRAME_OVERHEAD bl performance_monitor_exception - b interrupt_return_lite + b interrupt_return GEN_KVM performance_monitor
@@ -3013,7 +3013,7 @@ do_hash_page: cmpdi r3,0 /* see if __hash_page succeeded */ /* Success */ - beq interrupt_return_lite /* Return from exception on success */ + beq interrupt_return /* Return from exception on success */ /* Error */ blt- 13f
@@ -3027,10 +3027,11 @@ do_hash_page: handle_page_fault: 11: andis. r0,r5,DSISR_DABRMATCH@h bne- handle_dabr_fault + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl do_page_fault cmpdi r3,0 - beq+ interrupt_return_lite + beq+ interrupt_return mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD ld r4,_DAR(r1)
@@ -3045,9 +3046,9 @@ handle_dabr_fault: bl do_break /* * do_break() may have changed the NV GPRS while handling a breakpoint. - * If so, we need to restore them with their updated values. Don't use - * interrupt_return_lite here. + * If so, we need to restore them with their updated values. */ + REST_NVGPRS(r1) b interrupt_return
Signature · 1 line
2.23.0
PATCH v2 26/35 powerpc/64: system call: Fix sparse warning about missing declaration
In reply to Michal SuchanekSparse warns about missing declarations for these functions:
+arch/powerpc/kernel/syscall_64.c:108:23: warning: symbol 'syscall_exit_prepare' was not declared. Should it be static? +arch/powerpc/kernel/syscall_64.c:18:6: warning: symbol 'system_call_exception' was not declared. Should it be static? +arch/powerpc/kernel/syscall_64.c:200:23: warning: symbol 'interrupt_exit_user_prepare' was not declared. Should it be static? +arch/powerpc/kernel/syscall_64.c:288:23: warning: symbol 'interrupt_exit_kernel_prepare' was not declared. Should it be static?
Add declaration for them.
--- arch/powerpc/include/asm/asm-prototypes.h | 6 ++++++ arch/powerpc/kernel/syscall_64.c | 1 + 2 files changed, 7 insertions(+)
arch/powerpc/include/asm/asm-prototypes.h +6 -0
@@ -96,6 +96,12 @@ ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, sunsigned long __init early_init (unsigned long dt_ptr);void __init machine_init (u64 dt_ptr);#endif +#ifdef CONFIG_PPC64 +long system_call_exception (long r3,long r4,long r5,long r6,long r7,long r8,unsigned long r0,struct pt_regs *regs); +notrace unsigned long syscall_exit_prepare (unsigned long r3,struct pt_regs *regs); +notrace unsigned long interrupt_exit_user_prepare (struct pt_regs *regs,unsigned long msr); +notrace unsigned long interrupt_exit_kernel_prepare (struct pt_regs *regs,unsigned long msr); +#endif long ppc_fadvise64_64 (int fd,int advice,u32 offset_high,u32 offset_low,u32 len_high,u32 len_low);
arch/powerpc/kernel/syscall_64.c +1 -0
@@ -1,4 +1,5 @@#include <linux/err.h> +#include <asm/asm-prototypes.h> #include <asm/book3s/64/kup-radix.h> #include <asm/cputime.h> #include <asm/hw_irq.h>
Signature · 1 line
2.23.0
Re: [PATCH v2 26/35] powerpc/64: system call: Fix sparse warning about missing declaration
Quoted 8 lines · Michal Suchanek
Sparse warns about missing declarations for these functions:
(quoted diff) +4
-0+arch/powerpc/kernel/syscall_64.c:108:23: warning: symbol 'syscall_exit_prepare' was not declared. Should it be static? +arch/powerpc/kernel/syscall_64.c:18:6: warning: symbol 'system_call_exception' was not declared. Should it be static? +arch/powerpc/kernel/syscall_64.c:200:23: warning: symbol 'interrupt_exit_user_prepare' was not declared. Should it be static? +arch/powerpc/kernel/syscall_64.c:288:23: warning: symbol 'interrupt_exit_kernel_prepare' was not declared. Should it be static?Add declaration for them.
I'm fine with this patch but, just FYI, lately people seems to prefer to add '__visible' to the function definition instead of creating such header files.
Best regards,
-- Luc Van Oostenryck
Re: [PATCH v2 26/35] powerpc/64: system call: Fix sparse warning about missing declaration
Le 26/11/2019 à 22:44, Luc Van Oostenryck a écrit :
Quoted 8 lines · Michal Suchanek
Quoted 7 lines
Sparse warns about missing declarations for these functions:
(quoted diff) +4
-0+arch/powerpc/kernel/syscall_64.c:108:23: warning: symbol 'syscall_exit_prepare' was not declared. Should it be static? +arch/powerpc/kernel/syscall_64.c:18:6: warning: symbol 'system_call_exception' was not declared. Should it be static? +arch/powerpc/kernel/syscall_64.c:200:23: warning: symbol 'interrupt_exit_user_prepare' was not declared. Should it be static? +arch/powerpc/kernel/syscall_64.c:288:23: warning: symbol 'interrupt_exit_kernel_prepare' was not declared. Should it be static?
Quoted 5 lines
Quoted 1 line
Add declaration for them.
I'm fine with this patch but, just FYI, lately people seems to prefer to add '
__visible' to the function definition instead of creating such header files.
AFAIU, that's not exactly the purpose of '__visible', see https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9add850c2
Christophe
PATCH v2 27/35 powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
In reply to Michal SuchanekThis partially reverts commit caf6f9c8a326 ("asm-generic: Remove unneeded __ARCH_WANT_SYS_LLSEEK macro")
When CONFIG_COMPAT is disabled on ppc64 the kernel does not build.
There is resistance to both removing the llseek syscall from the 64bit syscall tables and building the llseek interface unconditionally.
--- arch/powerpc/include/asm/unistd.h | 1 + fs/read_write.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-)
arch/powerpc/include/asm/unistd.h +1 -0
@@ -31,6 +31,7 @@#define __ARCH_WANT_SYS_SOCKETCALL#define __ARCH_WANT_SYS_FADVISE64#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK#define __ARCH_WANT_SYS_NICE#define __ARCH_WANT_SYS_OLD_GETRLIMIT#define __ARCH_WANT_SYS_OLD_UNAME
fs/read_write.c +2 -1
@@ -331,7 +331,8 @@ COMPAT_SYSCALL_DEFINE3(lseek, unsigned int, fd, compat_off_t, offset, unsigned i }#endif -#if !defined(CONFIG_64BIT ) || defined(CONFIG_COMPAT ) +#if !defined(CONFIG_64BIT ) || defined(CONFIG_COMPAT ) || \ + defined(__ARCH_WANT_SYS_LLSEEK) SYSCALL_DEFINE5(llseek, unsigned int, fd, unsigned long, offset_high, unsigned long, offset_low, loff_t __user *, result, unsigned int, whence)
Signature · 1 line
2.23.0
PATCH v2 28/35 powerpc: move common register copy functions from signal_32.c to signal.c
In reply to Michal SuchanekThese functions are required for 64bit as well.
--- arch/powerpc/kernel/signal.c | 141 ++++++++++++++++++++++++++++++++ arch/powerpc/kernel/signal_32.c | 140 ------------------------------- 2 files changed, 141 insertions(+), 140 deletions(-)
arch/powerpc/kernel/signal.c +141 -0
@@ -18,12 +18,153 @@#include <linux/syscalls.h> #include <asm/hw_breakpoint.h> #include <linux/uaccess.h> +#include <asm/switch_to.h> #include <asm/unistd.h> #include <asm/debug.h> #include <asm/tm.h> #include "signal.h" +#ifdef CONFIG_VSX +unsigned long copy_fpr_to_user (void __user *to, +struct task_struct *task) +{ +u64 buf[ELF_NFPREG ]; +int i; + +/* save FPR copy to local buffer then write to the thread_struct */ +for (i =0 ; i < (ELF_NFPREG -1 ) ; i++) + buf[i] = task->thread.TS_FPR (i); + buf[i] = task->thread.fp_state.fpscr; +return __copy_to_user (to, buf,ELF_NFPREG *sizeof (double )); +} + +unsigned long copy_fpr_from_user (struct task_struct *task, +void __user *from) +{ +u64 buf[ELF_NFPREG ]; +int i; + +if (__copy_from_user (buf, from,ELF_NFPREG *sizeof (double ))) +return 1 ; +for (i =0 ; i < (ELF_NFPREG -1 ) ; i++) + task->thread.TS_FPR (i) = buf[i]; + task->thread.fp_state.fpscr = buf[i]; + +return 0 ; +} + +unsigned long copy_vsx_to_user (void __user *to, +struct task_struct *task) +{ +u64 buf[ELF_NVSRHALFREG ]; +int i; + +/* save FPR copy to local buffer then write to the thread_struct */ +for (i =0 ; i <ELF_NVSRHALFREG ; i++) + buf[i] = task->thread.fp_state.fpr[i][TS_VSRLOWOFFSET ]; +return __copy_to_user (to, buf,ELF_NVSRHALFREG *sizeof (double )); +} + +unsigned long copy_vsx_from_user (struct task_struct *task, +void __user *from) +{ +u64 buf[ELF_NVSRHALFREG ]; +int i; + +if (__copy_from_user (buf, from,ELF_NVSRHALFREG *sizeof (double ))) +return 1 ; +for (i =0 ; i <ELF_NVSRHALFREG ; i++) + task->thread.fp_state.fpr[i][TS_VSRLOWOFFSET ] = buf[i]; +return 0 ; +} + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +unsigned long copy_ckfpr_to_user (void __user *to, +struct task_struct *task) +{ +u64 buf[ELF_NFPREG ]; +int i; + +/* save FPR copy to local buffer then write to the thread_struct */ +for (i =0 ; i < (ELF_NFPREG -1 ) ; i++) + buf[i] = task->thread.TS_CKFPR (i); + buf[i] = task->thread.ckfp_state.fpscr; +return __copy_to_user (to, buf,ELF_NFPREG *sizeof (double )); +} + +unsigned long copy_ckfpr_from_user (struct task_struct *task, +void __user *from) +{ +u64 buf[ELF_NFPREG ]; +int i; + +if (__copy_from_user (buf, from,ELF_NFPREG *sizeof (double ))) +return 1 ; +for (i =0 ; i < (ELF_NFPREG -1 ) ; i++) + task->thread.TS_CKFPR (i) = buf[i]; + task->thread.ckfp_state.fpscr = buf[i]; + +return 0 ; +} + +unsigned long copy_ckvsx_to_user (void __user *to, +struct task_struct *task) +{ +u64 buf[ELF_NVSRHALFREG ]; +int i; + +/* save FPR copy to local buffer then write to the thread_struct */ +for (i =0 ; i <ELF_NVSRHALFREG ; i++) + buf[i] = task->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET ]; +return __copy_to_user (to, buf,ELF_NVSRHALFREG *sizeof (double )); +} + +unsigned long copy_ckvsx_from_user (struct task_struct *task, +void __user *from) +{ +u64 buf[ELF_NVSRHALFREG ]; +int i; + +if (__copy_from_user (buf, from,ELF_NVSRHALFREG *sizeof (double ))) +return 1 ; +for (i =0 ; i <ELF_NVSRHALFREG ; i++) + task->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET ] = buf[i]; +return 0 ; +} +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ +#else +inline unsigned long copy_fpr_to_user (void __user *to, +struct task_struct *task) +{ +return __copy_to_user (to, task->thread.fp_state.fpr, +ELF_NFPREG *sizeof (double )); +} + +inline unsigned long copy_fpr_from_user (struct task_struct *task, +void __user *from) +{ +return __copy_from_user (task->thread.fp_state.fpr, from, +ELF_NFPREG *sizeof (double )); +} + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +inline unsigned long copy_ckfpr_to_user (void __user *to, +struct task_struct *task) +{ +return __copy_to_user (to, task->thread.ckfp_state.fpr, +ELF_NFPREG *sizeof (double )); +} + +inline unsigned long copy_ckfpr_from_user (struct task_struct *task, +void __user *from) +{ +return __copy_from_user (task->thread.ckfp_state.fpr, from, +ELF_NFPREG *sizeof (double )); +} +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ +#endif +/* Log an error when sending an unhandled signal to a process. Controlled * through debug.exception-trace sysctl. */
arch/powerpc/kernel/signal_32.c +0 -140
146 lines not on this page · raw message
Signature · 1 line
2.23.0
PATCH v2 29/35 powerpc/perf: remove current_is_64bit()
In reply to Michal SuchanekSince commit ed1cd6deb013 ("powerpc: Activate CONFIG_THREAD_INFO_IN_TASK") current_is_64bit() is quivalent to !is_32bit_task().
Remove the redundant function.
--- arch/powerpc/perf/callchain.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)
arch/powerpc/perf/callchain.c +1 -16
@@ -284,16 +284,6 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry, } } -static inline int current_is_64bit (void ) -{ -/* -* We can't use test_thread_flag() here because we may be on an -* interrupt stack, and the thread flags don't get copied over -* from the thread_info on the main stack to the interrupt stack. -*/ -return !test_ti_thread_flag (task_thread_info (current),TIF_32BIT ); -} -#else /* CONFIG_PPC64 */ /* * On 32-bit we just access the address and let hash_page create a
@@ -321,11 +311,6 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry { } -static inline int current_is_64bit (void ) -{ -return 0 ; -} -static inline int valid_user_sp (unsigned long sp,int is_64) {if (!sp || (sp &7 ) || sp >TASK_SIZE -32 )
@@ -486,7 +471,7 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,void perf_callchain_user (struct perf_callchain_entry_ctx *entry,struct pt_regs *regs) { -if (current_is_64bit ()) +if (!is_32bit_task ())perf_callchain_user_64 (entry, regs);else perf_callchain_user_32 (entry, regs);
Signature · 1 line
2.23.0
Re: [PATCH v2 29/35] powerpc/perf: remove current_is_64bit()
Le 26/11/2019 à 21:13, Michal Suchanek a écrit :
Quoted 10 lines
Since commit
ed1cd6deb013("powerpc: ActivateCONFIG_THREAD_INFO_IN_TASK")current_is_64bit()is quivalent to !is_32bit_task().
Remove the redundant function.Fixes linuxppc#275Suggested-by Christophe Leroy <[email protected]>Signed-off-by Michal Suchanek <[email protected]>
This change is already in powerpc/next, see https://github.com/linuxppc/linux/commit/42484d2c0f82b666292faf6668c77b49a3a04bc0
Christophe
Quoted 47 lines
--- arch/powerpc/perf/callchain.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)arch/powerpc/perf/callchain.c +1
-16@@ -284,16 +284,6 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry, } } -static inline int current_is_64bit (void ) -{ -/* -* We can't use test_thread_flag() here because we may be on an -* interrupt stack, and the thread flags don't get copied over -* from the thread_info on the main stack to the interrupt stack. -*/ -return !test_ti_thread_flag (task_thread_info (current),TIF_32BIT ); -} -#else /* CONFIG_PPC64 */ /* * On 32-bit we just access the address and let hash_page create a @@ -321,11 +311,6 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry { } -static inline int current_is_64bit (void ) -{ -return 0 ; -} -static inline int valid_user_sp (unsigned long sp,int is_64) {if (!sp || (sp &7 ) || sp >TASK_SIZE -32 )@@ -486,7 +471,7 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,void perf_callchain_user (struct perf_callchain_entry_ctx *entry,struct pt_regs *regs) { -if (current_is_64bit ()) +if (!is_32bit_task ())perf_callchain_user_64 (entry, regs);else perf_callchain_user_32 (entry, regs);
Re: [PATCH v2 29/35] powerpc/perf: remove current_is_64bit()
Quoted 7 lines · Christophe Leroy
Le 26/11/2019 à 21:13, Michal Suchanek a écrit :
Quoted 4 lines
Since commit
ed1cd6deb013("powerpc: ActivateCONFIG_THREAD_INFO_IN_TASK")current_is_64bit()is quivalent to !is_32bit_task().
Remove the redundant function.
Quoted 8 lines
Quoted 6 lines
Fixes linuxppc#275Suggested-by Christophe Leroy <[email protected]>Signed-off-by Michal Suchanek <[email protected]>This change is already in powerpc/next, see https://github.com/linuxppc/linux/commit/42484d2c0f82b666292faf6668c77b49a3a04bc0
Right, needs rebase.
Thanks
Michal
Quoted 48 lines
Christophe
Quoted 45 lines
--- arch/powerpc/perf/callchain.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-)arch/powerpc/perf/callchain.c +1
-16@@ -284,16 +284,6 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry, } } -static inline int current_is_64bit (void ) -{ -/* -* We can't use test_thread_flag() here because we may be on an -* interrupt stack, and the thread flags don't get copied over -* from the thread_info on the main stack to the interrupt stack. -*/ -return !test_ti_thread_flag (task_thread_info (current),TIF_32BIT ); -} -#else /* CONFIG_PPC64 */ /* * On 32-bit we just access the address and let hash_page create a @@ -321,11 +311,6 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry { } -static inline int current_is_64bit (void ) -{ -return 0 ; -} -static inline int valid_user_sp (unsigned long sp,int is_64) {if (!sp || (sp &7 ) || sp >TASK_SIZE -32 )@@ -486,7 +471,7 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,void perf_callchain_user (struct perf_callchain_entry_ctx *entry,struct pt_regs *regs) { -if (current_is_64bit ()) +if (!is_32bit_task ())perf_callchain_user_64 (entry, regs);else perf_callchain_user_32 (entry, regs);
PATCH v2 30/35 powerpc/perf: consolidate read_user_stack_32
In reply to Michal SuchanekThere are two almost identical copies for 32bit and 64bit.
The function is used only in 32bit code which will be split out in next patch so consolidate to one function.
---
v6: new patch
v8: move the consolidated function out of the ifdef block.
--- arch/powerpc/perf/callchain.c | 59 +++++++++++++++-------------------- 1 file changed, 25 insertions(+), 34 deletions(-)
arch/powerpc/perf/callchain.c +25 -34
@@ -165,22 +165,6 @@ static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)return read_user_stack_slow (ptr, ret,8 ); } -static int read_user_stack_32 (unsigned int __user *ptr,unsigned int *ret) -{ -if ((unsigned long )ptr >TASK_SIZE -sizeof (unsigned int ) || - ((unsigned long )ptr &3 )) -return -EFAULT ; - -pagefault_disable (); -if (!__get_user_inatomic (*ret, ptr)) { -pagefault_enable (); -return 0 ; - } -pagefault_enable (); - -return read_user_stack_slow (ptr, ret,4 ); -} -static inline int valid_user_sp (unsigned long sp,int is_64) {if (!sp || (sp &7 ) || sp > (is_64 ?TASK_SIZE :0x100000000UL ) -32 )
@@ -285,25 +269,9 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry, }#else /* CONFIG_PPC64 */ -/* -* On 32-bit we just access the address and let hash_page create a -* HPTE if necessary, so there is no need to fall back to reading -* the page tables. Since this is called at interrupt level, -* do_page_fault() won't treat a DSI as a page fault. -*/ -static int read_user_stack_32 (unsigned int __user *ptr,unsigned int *ret) +static int read_user_stack_slow (void __user *ptr,void *buf,int nb) { -int rc; - -if ((unsigned long )ptr >TASK_SIZE -sizeof (unsigned int ) || - ((unsigned long )ptr &3 )) -return -EFAULT ; - -pagefault_disable (); - rc =__get_user_inatomic (*ret, ptr); -pagefault_enable (); - -return rc; +return 0 ; } static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
@@ -326,6 +294,29 @@ static inline int valid_user_sp(unsigned long sp, int is_64)#endif /* CONFIG_PPC64 */ +/* +* On 32-bit we just access the address and let hash_page create a +* HPTE if necessary, so there is no need to fall back to reading +* the page tables. Since this is called at interrupt level, +* do_page_fault() won't treat a DSI as a page fault. +*/ +static int read_user_stack_32 (unsigned int __user *ptr,unsigned int *ret) +{ +int rc; + +if ((unsigned long )ptr >TASK_SIZE -sizeof (unsigned int ) || + ((unsigned long )ptr &3 )) +return -EFAULT ; + +pagefault_disable (); + rc =__get_user_inatomic (*ret, ptr); +pagefault_enable (); + +if (IS_ENABLED (CONFIG_PPC64 ) && rc) +return read_user_stack_slow (ptr, ret,4 ); +return rc; +} +/* * Layout for non-RT signal frames */
Signature · 1 line
2.23.0
PATCH v2 31/35 powerpc/perf: consolidate valid_user_sp
In reply to Michal SuchanekMerge the 32bit and 64bit version.
Halve the check constants on 32bit.
Use STACK_TOP since it is defined.
Passing is_64 is now redundant since is_32bit_task() is used to determine which callchain variant should be used. Use STACK_TOP and is_32bit_task() directly.
This removes a page from the valid 32bit area on 64bit:
#define TASK_SIZE_USER32 (0x0000000100000000UL - (1 * PAGE_SIZE)) #define STACK_TOP_USER32 TASK_SIZE_USER32
---
v8: new patch
v11: simplify by using is_32bit_task()
--- arch/powerpc/perf/callchain.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-)
arch/powerpc/perf/callchain.c +11 -16
@@ -102,6 +102,15 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re } } +static inline int valid_user_sp (unsigned long sp) +{ +bool is_64 = !is_32bit_task (); + +if (!sp || (sp & (is_64 ?7 :3 )) || sp >STACK_TOP - (is_64 ?32 :16 )) +return 0 ; +return 1 ; +} +#ifdef CONFIG_PPC64 /* * On 64-bit we don't want to invoke hash_page on user addresses from
@@ -165,13 +174,6 @@ static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)return read_user_stack_slow (ptr, ret,8 ); } -static inline int valid_user_sp (unsigned long sp,int is_64) -{ -if (!sp || (sp &7 ) || sp > (is_64 ?TASK_SIZE :0x100000000UL ) -32 ) -return 0 ; -return 1 ; -} -/* * 64-bit user processes use the same stack frame for RT and non-RT signals. */
@@ -230,7 +232,7 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,while (entry->nr < entry->max_stack) { fp = (unsigned long __user *) sp; -if (!valid_user_sp (sp,1 ) ||read_user_stack_64 (fp, &next_sp)) +if (!valid_user_sp (sp) ||read_user_stack_64 (fp, &next_sp))return ;if (level >0 &&read_user_stack_64 (&fp[2 ], &next_ip))return ;
@@ -279,13 +281,6 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry { } -static inline int valid_user_sp (unsigned long sp,int is_64) -{ -if (!sp || (sp &7 ) || sp >TASK_SIZE -32 ) -return 0 ; -return 1 ; -} -#define __SIGNAL_FRAMESIZE32 __SIGNAL_FRAMESIZE#define sigcontext32 sigcontext#define mcontext32 mcontext
@@ -428,7 +423,7 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,while (entry->nr < entry->max_stack) { fp = (unsigned int __user *) (unsigned long ) sp; -if (!valid_user_sp (sp,0 ) ||read_user_stack_32 (fp, &next_sp)) +if (!valid_user_sp (sp) ||read_user_stack_32 (fp, &next_sp))return ;if (level >0 &&read_user_stack_32 (&fp[1 ], &next_ip))return ;
Signature · 1 line
2.23.0
PATCH v2 32/35 powerpc/64: make buildable without CONFIG_COMPAT
In reply to Michal SuchanekThere are numerous references to 32bit functions in generic and 64bit code so ifdef them out.
---
v2:
- fix 32bit ifdef condition in signal.c
- simplify the compat ifdef condition in vdso.c - 64bit is redundant
- simplify the compat ifdef condition in callchain.c - 64bit is redundant v3:
- use IS_ENABLED and maybe_unused where possible
- do not ifdef declarations
- clean up Makefile
v4:
- further makefile cleanup
- simplify is_32bit_task conditions
- avoid ifdef in condition by using return
v5:
- avoid unreachable code on 32bit
- make is_current_64bit constant on !COMPAT
- add stub perf_callchain_user_32 to avoid some ifdefs
v6:
- consolidate current_is_64bit
v7:
- remove leftover perf_callchain_user_32 stub from previous series version v8:
- fix build again - too trigger-happy with stub removal
- remove a vdso.c hunk that causes warning according to kbuild test robot v9:
- removed current_is_64bit in previous patch
v10:
- rebase on top of 70ed86f4de5bd
--- arch/powerpc/include/asm/thread_info.h | 4 ++-- arch/powerpc/kernel/Makefile | 6 +++--- arch/powerpc/kernel/entry_64.S | 2 ++ arch/powerpc/kernel/signal.c | 3 +-- arch/powerpc/kernel/syscall_64.c | 6 ++---- arch/powerpc/kernel/vdso.c | 3 ++- arch/powerpc/perf/callchain.c | 8 +++++++- 7 files changed, 19 insertions(+), 13 deletions(-)
arch/powerpc/include/asm/thread_info.h +2 -2
@@ -144,10 +144,10 @@ static inline bool test_thread_local_flags(unsigned int flags)return (ti->local_flags & flags) !=0 ; } -#ifdef CONFIG_PPC64 +#ifdef CONFIG_COMPAT #define is_32bit_task () (test_thread_flag(TIF_32BIT))#else -#define is_32bit_task () (1) +#define is_32bit_task () (IS_ENABLED(CONFIG_PPC32))#endif #if defined(CONFIG_PPC64 )
arch/powerpc/kernel/Makefile +3 -3
@@ -44,16 +44,16 @@ CFLAGS_btext.o += -DDISABLE_BRANCH_PROFILING endif obj-y := cputable.o ptrace.o syscalls.o \ - irq.o align.o signal_32.o pmc.o vdso.o \ + irq.o align.o signal_$(BITS).o pmc.o vdso.o \ process.o systbl.o idle.o \ signal.o sysfs.o cacheinfo.o time.o \ prom.o traps.o setup-common.o \ udbg.o misc.o io.o misc_$(BITS).o \ of_platform.o prom_parse.o -obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ - signal_64.o ptrace32.o \ +obj-$(CONFIG_PPC64) += setup_64.o \ paca.o nvram_64.o firmware.o note.o \ syscall_64.o +obj-$(CONFIG_COMPAT) += sys_ppc32.o ptrace32.o signal_32.o obj-$(CONFIG_VDSO32) += vdso32/ obj-$(CONFIG_PPC_WATCHDOG) += watchdog.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
arch/powerpc/kernel/entry_64.S +2 -0
@@ -52,8 +52,10 @@ SYS_CALL_TABLE: .tc sys_call_table[TC],sys_call_table +#ifdef CONFIG_COMPAT COMPAT_SYS_CALL_TABLE: .tc compat_sys_call_table[TC],compat_sys_call_table +#endif /* This value is used to mark exception frames on the stack. */ exception_marker:
arch/powerpc/kernel/signal.c +1 -2
@@ -247,7 +247,6 @@ static void do_signal(struct task_struct *tsk)sigset_t *oldset =sigmask_to_save ();struct ksignal ksig = { .sig =0 };int ret; -int is32 =is_32bit_task ();BUG_ON (tsk != current);
@@ -277,7 +276,7 @@ static void do_signal(struct task_struct *tsk)rseq_signal_deliver (&ksig, tsk->thread.regs); -if (is32) { +if (is_32bit_task ()) {if (ksig.ka.sa.sa_flags &SA_SIGINFO ) ret =handle_rt_signal32 (&ksig, oldset, tsk);else
arch/powerpc/kernel/syscall_64.c +2 -4
@@ -18,7 +18,6 @@ typedef long (*syscall_fn)(long, long, long, long, long, long);long system_call_exception (long r3,long r4,long r5,long r6,long r7,long r8,unsigned long r0,struct pt_regs *regs) { -unsigned long ti_flags;syscall_fn f;if (IS_ENABLED (CONFIG_PPC_BOOK3S ))
@@ -65,8 +64,7 @@ long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8,__hard_irq_enable (); - ti_flags =current_thread_info ()->flags; -if (unlikely (ti_flags & _TIF_SYSCALL_DOTRACE)) { +if (unlikely (current_thread_info ()->flags & _TIF_SYSCALL_DOTRACE)) {/* * We use the return value of do_syscall_trace_enter() as the * syscall number. If the syscall was rejected for any reason
@@ -82,7 +80,7 @@ long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8,/* May be faster to do array_index_nospec? */ barrier_nospec (); -if (unlikely (ti_flags & _TIF_32BIT)) { +if (unlikely (is_32bit_task ())) { f = (void *)compat_sys_call_table[r0]; r3 &=0x00000000ffffffffULL ;
arch/powerpc/kernel/vdso.c +2 -1
@@ -656,7 +656,8 @@ static void __init vdso_setup_syscall_map(void)if (sys_call_table[i] != sys_ni_syscall) vdso_data->syscall_map_64[i >>5 ] |=0x80000000UL >> (i &0x1f ); -if (compat_sys_call_table[i] != sys_ni_syscall) +if (IS_ENABLED (CONFIG_COMPAT ) && + compat_sys_call_table[i] != sys_ni_syscall) vdso_data->syscall_map_32[i >>5 ] |=0x80000000UL >> (i &0x1f );#else /* CONFIG_PPC64 */
arch/powerpc/perf/callchain.c +7 -1
@@ -15,7 +15,7 @@#include <asm/sigcontext.h> #include <asm/ucontext.h> #include <asm/vdso.h> -#ifdef CONFIG_PPC64 +#ifdef CONFIG_COMPAT #include "../kernel/ppc32.h" #endif #include <asm/pte-walk.h>
@@ -289,6 +289,7 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry#endif /* CONFIG_PPC64 */ +#if defined(CONFIG_PPC32 ) || defined(CONFIG_COMPAT )/* * On 32-bit we just access the address and let hash_page create a * HPTE if necessary, so there is no need to fall back to reading
@@ -453,6 +454,11 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry, sp = next_sp; } } +#else /* 32bit */ +static void perf_callchain_user_32 (struct perf_callchain_entry_ctx *entry, +struct pt_regs *regs) +{} +#endif /* 32bit */ void perf_callchain_user (struct perf_callchain_entry_ctx *entry,struct pt_regs *regs)
Signature · 1 line
2.23.0
PATCH v2 33/35 powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
In reply to Michal SuchanekOn bigendian ppc64 it is common to have 32bit legacy binaries but much less so on littleendian.
---
v3: make configurable
--- arch/powerpc/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
arch/powerpc/Kconfig +3 -2
@@ -266,8 +266,9 @@ config PANIC_TIMEOUT default 180 config COMPAT - bool - default y if PPC64 + bool "Enable support for 32bit binaries" + depends on PPC64 + default y if !CPU_LITTLE_ENDIAN select COMPAT_BINFMT_ELF select ARCH_WANT_OLD_COMPAT_IPC select COMPAT_OLD_SIGACTION
Signature · 1 line
2.23.0
PATCH v2 34/35 powerpc/perf: split callchain.c by bitness
In reply to Michal SuchanekBuilding callchain.c with !COMPAT proved quite ugly with all the defines. Splitting out the 32bit and 64bit parts looks better.
No code change intended.
---
v6:
- move current_is_64bit consolidetaion to earlier patch
- move defines to the top of callchain_32.c
- Makefile cleanup
v8:
- fix valid_user_sp
--- arch/powerpc/perf/Makefile | 5 +- arch/powerpc/perf/callchain.c | 362 +------------------------------ arch/powerpc/perf/callchain.h | 20 ++ arch/powerpc/perf/callchain_32.c | 197 +++++++++++++++++ arch/powerpc/perf/callchain_64.c | 178 +++++++++++++++ 5 files changed, 400 insertions(+), 362 deletions(-) create mode 100644 arch/powerpc/perf/callchain.h create mode 100644 arch/powerpc/perf/callchain_32.c create mode 100644 arch/powerpc/perf/callchain_64.c
arch/powerpc/perf/Makefile +4 -1
@@ -1,6 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_PERF_EVENTS) += callchain.o perf_regs.o +obj-$(CONFIG_PERF_EVENTS) += callchain.o callchain_$(BITS).o perf_regs.o +ifdef CONFIG_COMPAT +obj-$(CONFIG_PERF_EVENTS) += callchain_32.o +endif obj-$(CONFIG_PPC_PERF_CTRS) += core-book3s.o bhrb.o obj64-$(CONFIG_PPC_PERF_CTRS) += ppc970-pmu.o power5-pmu.o \
arch/powerpc/perf/callchain.c +1 -361
376 lines not on this page · raw message
arch/powerpc/perf/callchain.h new file +20 -0
@@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _POWERPC_PERF_CALLCHAIN_H +#define _POWERPC_PERF_CALLCHAIN_H + +int read_user_stack_slow (void __user *ptr,void *buf,int nb); +void perf_callchain_user_64 (struct perf_callchain_entry_ctx *entry, +struct pt_regs *regs); +void perf_callchain_user_32 (struct perf_callchain_entry_ctx *entry, +struct pt_regs *regs); + +static inline int valid_user_sp (unsigned long sp) +{ +bool is_64 = !is_32bit_task (); + +if (!sp || (sp & (is_64 ?7 :3 )) || sp >STACK_TOP - (is_64 ?32 :16 )) +return 0 ; +return 1 ; +} + +#endif /* _POWERPC_PERF_CALLCHAIN_H */
arch/powerpc/perf/callchain_32.c new file +197 -0
197 lines not on this page · raw message
arch/powerpc/perf/callchain_64.c new file +178 -0
178 lines not on this page · raw message
Signature · 1 line
2.23.0
PATCH v2 35/35 MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry.
In reply to Michal Suchanek--- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+)
MAINTAINERS +2 -0
@@ -12842,6 +12842,8 @@ F: arch/*/kernel/*/perf_event*.c F: arch/*/kernel/*/*/perf_event*.c F: arch/*/include/asm/perf_event.h F: arch/*/kernel/perf_callchain.c +F: arch/*/perf/* +F: arch/*/perf/*/* F: arch/*/events/* F: arch/*/events/*/* F: tools/perf/
Signature · 1 line
2.23.0