Skip to contentSkip to conversation

drm/dp_mst: Remove VCPI while disabling topology mgr

PATCH Superseded Wayne Lin 2 participants 3 messages Dec 2, 2019 – Dec 3, 2019

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Wayne Lin

author
#0 lore raw

PATCH 1/1 drm/dp_mst: Remove VCPI while disabling topology mgr

[Why]
While disabling mst topology manager in drm_dp_mst_topology_mgr_set_mst(), now just reset the mgr->payloads but doesn't handle the mgr->proposed_vcpis.

[How]
Remove mgr->proposed_vcpis to NULL.

---
 drivers/gpu/drm/drm_dp_mst_topology.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/gpu/drm/drm_dp_mst_topology.c +12 -0
index ae5809a1f19a..81e92b260d7a 100644
@@ -3386,6 +3386,7 @@ static int drm_dp_get_vc_payload_bw(u8 dp_link_bw, u8  dp_link_count)
 int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool mst_state)
 {
 	int ret = 0;
+	int i = 0;
 	struct drm_dp_mst_branch *mstb = NULL;
 
 	mutex_lock(&mgr->lock);
@@ -3446,10 +3447,21 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
 		/* this can fail if the device is gone */
 		drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, 0);
 		ret = 0;
+		mutex_lock(&mgr->payload_lock);
 		memset(mgr->payloads, 0, mgr->max_payloads * sizeof(struct drm_dp_payload));
 		mgr->payload_mask = 0;
 		set_bit(0, &mgr->payload_mask);
+		for (i = 0; i < mgr->max_payloads; i++) {
+			struct drm_dp_vcpi *tmp_vcpi = mgr->proposed_vcpis[i];
+
+			if (tmp_vcpi) {
+				tmp_vcpi->vcpi = 0;
+				tmp_vcpi->num_slots = 0;
+			}
+			mgr->proposed_vcpis[i] = NULL;
+		}
 		mgr->vcpi_mask = 0;
+		mutex_unlock(&mgr->payload_lock);
 	}
 
 out_unlock:
Signature · 6 lines
2.17.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

I'm, not entirely sure what this patch is trying to accomplish. I'm guessing maybe we're leaving stale VCPI allocations from the previous topology enablement and then somehow trying to use those again when allocating payloads? The patch looks correct at least.

If this patch is fixing an issue, such as displays not turning on with amdgpu, I'd definitely mention it in more detail here and Cc to stable if applicable. Also, one nitpick below:

Quoted 39 lines · Wayne Lin

[Why]
While disabling mst topology manager in drm_dp_mst_topology_mgr_set_mst(), now just reset the mgr->payloads but doesn't handle the mgr->proposed_vcpis.

[How]
Remove mgr->proposed_vcpis to NULL.

---
 drivers/gpu/drm/drm_dp_mst_topology.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/gpu/drm/drm_dp_mst_topology.c +1 -0
index ae5809a1f19a..81e92b260d7a 100644
@@ -3386,6 +3386,7 @@ static int drm_dp_get_vc_payload_bw(u8 dp_link_bw,
 u8  dp_link_count)
 int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr,
 bool mst_state)
 {
 	int ret = 0;
+	int i = 0;
 	struct drm_dp_mst_branch *mstb = NULL;
drivers/gpu/drm/drm_dp_mst_topology.c +0 -0
 	mutex_lock(&mgr->lock);
@@ -3446,10 +3447,21 @@ int drm_dp_mst_topology_mgr_set_mst(struct

drm_dp_mst_topology_mgr *mgr, bool ms

drivers/gpu/drm/drm_dp_mst_topology.c +1 -0
 		/* this can fail if the device is gone */
 		drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, 0);
 		ret = 0;
+		mutex_lock(&mgr->payload_lock);
 		memset(mgr->payloads, 0, mgr->max_payloads * sizeof(struct

drm_dp_payload));

drivers/gpu/drm/drm_dp_mst_topology.c +1 -0
 		mgr->payload_mask = 0;
 		set_bit(0, &mgr->payload_mask);
+		for (i = 0; i < mgr->max_payloads; i++) {

drivers/gpu/drm/drm_dp_mst_topology.c int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms · line 3464

Quoted 10 lines
drivers/gpu/drm/drm_dp_mst_topology.c +9 -0
+			struct drm_dp_vcpi *tmp_vcpi = mgr->proposed_vcpis[i];
+
+			if (tmp_vcpi) {
+				tmp_vcpi->vcpi = 0;
+				tmp_vcpi->num_slots = 0;
+			}
+			mgr->proposed_vcpis[i] = NULL;
+		}
 		mgr->vcpi_mask = 0;
+		mutex_unlock(&mgr->payload_lock);

bikeshed: I'd just rename tmp_vcpi here to vcpi, but I'll leave that up to you

Quoted 3 lines

}

out_unlock:

Signature · 7 lines
Cheers,
	Lyude Paul

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author
#2 lore raw
Quoted 11 lines

-----Original Message-----
From: Lyude Paul <[email protected]>
Sent: Tuesday, December 3, 2019 8:03 AM
To: Lin, Wayne <[email protected]>; [email protected]; [email protected]
Cc: Kazlauskas, Nicholas <[email protected]>; Wentland, Harry <[email protected]>; Zuo, Jerry <[email protected]>
Subject: Re: [PATCH] drm/dp_mst: Remove VCPI while disabling topology mgr

Quoted 5 lines

I'm, not entirely sure what this patch is trying to accomplish. I'm guessing maybe we're leaving stale VCPI allocations from the previous topology enablement and then somehow trying to use those again when allocating payloads? The patch looks correct at least.

Thanks for your time and the comment.

Yes, this patch is trying to address the problem you mentioned.
Once unplug a DP MST capable device, driver will call drm_dp_mst_topology_mgr_set_mst() to reset mgr->payloads but it doesn't reset the mgr->proposed_vcpis. If it doesn't reset the proposed_vcpi, code will fail at checking port validation once plug in MST device later.
Once MST capable device plug in again and try to allocate payloads by calling drm_dp_update_payload_part1(), this function will iterate over all proposed virtual channels and check each port validation to see if the specified port is still in the topology. Since there are stale VCPI allocations from the previous topology enablement in proposed_vcpi[], code flow will fail and reurn EINVAL.

Quoted 2 lines

If this patch is fixing an issue, such as displays not turning on with amdgpu, I'd definitely mention it in more detail here and Cc to stable if applicable.

Thanks for your comment. I will Cc to [email protected] and amend the message in more detail in next version.

Quoted 1 line

Also, one nitpick below:

Thanks, I'll modify it.

Quoted 54 lines · Wayne Lin
Quoted 19 lines

[Why]
While disabling mst topology manager in drm_dp_mst_topology_mgr_set_mst(), now just reset the mgr->payloads but doesn't handle the mgr->proposed_vcpis.

[How]
Remove mgr->proposed_vcpis to NULL.

---
 drivers/gpu/drm/drm_dp_mst_topology.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/gpu/drm/drm_dp_mst_topology.c +0 -0
index ae5809a1f19a..81e92b260d7a 100644

drivers/gpu/drm/drm_dp_mst_topology.c static int drm_dp_get_vc_payload_bw(u8 · line 3388

Quoted 3 lines
drivers/gpu/drm/drm_dp_mst_topology.c +0 -0
@@ -3386,6 +3386,7 @@ static int drm_dp_get_vc_payload_bw(u8
 dp_link_bw,
 u8  dp_link_count)
 int drm_dp_mst_topology_mgr_set_mst(struct

drm_dp_mst_topology_mgr

Quoted 17 lines
drivers/gpu/drm/drm_dp_mst_topology.c +1 -0
 *mgr, bool mst_state)  {
 	int ret = 0;
+	int i = 0;
 	struct drm_dp_mst_branch *mstb = NULL;
drivers/gpu/drm/drm_dp_mst_topology.c +0 -0
 	mutex_lock(&mgr->lock);
@@ -3446,10 +3447,21 @@ int drm_dp_mst_topology_mgr_set_mst(struct

drm_dp_mst_topology_mgr *mgr, bool ms

drivers/gpu/drm/drm_dp_mst_topology.c +1 -0
 		/* this can fail if the device is gone */
 		drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, 0);
 		ret = 0;
+		mutex_lock(&mgr->payload_lock);
 		memset(mgr->payloads, 0, mgr->max_payloads * sizeof(struct

drm_dp_payload));

drivers/gpu/drm/drm_dp_mst_topology.c +1 -0
 		mgr->payload_mask = 0;
 		set_bit(0, &mgr->payload_mask);
+		for (i = 0; i < mgr->max_payloads; i++) {

drivers/gpu/drm/drm_dp_mst_topology.c int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms · line 3464

Quoted 10 lines
drivers/gpu/drm/drm_dp_mst_topology.c +9 -0
+			struct drm_dp_vcpi *tmp_vcpi = mgr->proposed_vcpis[i];
+
+			if (tmp_vcpi) {
+				tmp_vcpi->vcpi = 0;
+				tmp_vcpi->num_slots = 0;
+			}
+			mgr->proposed_vcpis[i] = NULL;
+		}
 		mgr->vcpi_mask = 0;
+		mutex_unlock(&mgr->payload_lock);

bikeshed: I'd just rename tmp_vcpi here to vcpi, but I'll leave that up to you

Quoted 6 lines
Quoted 3 lines

}

out_unlock:

--
Cheers,
Lyude Paul

--
BR,
Wayne Lin

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx