ARM: dts: imx: pxp for imx6sll
Subsystems (3)
cover ARM: dts: imx: pxp for imx6sll
fix bindings documentation about imx6sll and
add stuff to imx6sll.dtsi to enable pxp.
Andreas Kemnade (2):
media: dt-bindings: media: fsl-pxp: add missing imx6sll
ARM: dts: imx6sll: add PXP module
Documentation/devicetree/bindings/media/fsl-pxp.txt | 2 +- arch/arm/boot/dts/imx6sll.dtsi | 9 +++++++++ 2 files changed, 10 insertions(+), 1 deletion(-)
Signature · 1 line
2.20.1
PATCH 1/2 media: dt-bindings: media: fsl-pxp: add missing imx6sll
i.MX6SLL also has a pxp, so mention it among others in the bindings doc.
--- Documentation/devicetree/bindings/media/fsl-pxp.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/media/fsl-pxp.txt +1 -1
@@ -8,7 +8,7 @@ i.MX SoCs from i.MX23 to i.MX7. Required properties: - compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28, - imx6dl, imx6sl, imx6ul, imx6sx, imx6ull, or imx7d. + imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d. - reg: the register base and size for the device registers - interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d. - clock-names: should be "axi"
Signature · 1 line
2.20.1
Re: [PATCH 1/2] media: dt-bindings: media: fsl-pxp: add missing imx6sll
Quoted 7 lines · Andreas Kemnade
i.MX6SLL also has a pxp, so mention it among others in the bindings doc.
Signed-off-by Andreas Kemnade <[email protected]>--- Documentation/devicetree/bindings/media/fsl-pxp.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Shawn Guo
AppliedRe: [PATCH 1/2] media: dt-bindings: media: fsl-pxp: add missing imx6sll
In reply to Andreas KemnadeQuoted 3 lines · Andreas Kemnade
i.MX6SLL also has a pxp, so mention it among others in the bindings doc.
Signed-off-by Andreas Kemnade <[email protected]>
Applied both, thanks.
PATCH 2/2 ARM: dts: imx6sll: add PXP module
In reply to Andreas KemnadeWhile the EPDC is optional, both consumer and industrial editions have the PXP module, so adding it to the corresponding .dtsi Information taken from freescale kernel, compared with the reference manual and tested by a separate program.
Since it does not depend on external wiring, the
status = "disabled" is left out here.
--- arch/arm/boot/dts/imx6sll.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm/boot/dts/imx6sll.dtsi +9 -0
@@ -632,6 +632,15 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; }; + pxp: pxp@20f0000 { + compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp"; + reg = <0x20f0000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PXP>; + clock-names = "axi"; + }; + lcdif: lcd-controller@20f8000 { compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; reg = <0x020f8000 0x4000>;
Signature · 1 line
2.20.1