Skip to contentSkip to conversation

Enlist running kernel modules information

PATCH In review Bhaskar Chowdhury 4 participants 9 messages Dec 3, 2019 – Dec 6, 2019 1 message not in the archive Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 Enlist running kernel modules information

This is new file to show running kernel modules list.One line bash script.

---
 scripts/kernel_modules_info.sh | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100755 scripts/kernel_modules_info.sh
scripts/kernel_modules_info.sh new file +23 -0
new file mode 100755
index 000000000000..f005c47a3aa6
@@ -0,0 +1,23 @@
+#!/bin/bash - 
+#SPDX-License-Identifier: GPL-2.0
+#===============================================================================
+#
+#          FILE: kernel_modules_info.sh
+# 
+#         USAGE: ./kernel_modules_info.sh 
+# 
+#   DESCRIPTION:  Running kernel modules information.
+# 
+#       OPTIONS: ---
+#  REQUIREMENTS: awk
+#          BUGS: ---
+#         NOTES: ---
+#        AUTHOR: Bhaskar Chowdhury (https://about.me/unixbhaskar), [email protected]
+#  ORGANIZATION: Independent
+#       CREATED: 12/03/2019 13:52
+#      REVISION:  ---
+#===============================================================================
+
+set -o nounset                              # Treat unset variables as an error
+
+awk '{print $1}' "/proc/modules" | xargs modinfo | awk '/^(filename|desc|depends)/'
Signature · 1 line
2.24.0
#1 lore raw
Quoted 29 lines · Bhaskar Chowdhury

This is new file to show running kernel modules list.One line bash script.

---
 scripts/kernel_modules_info.sh | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100755 scripts/kernel_modules_info.sh
scripts/kernel_modules_info.sh new file +13 -0
new file mode 100755
index 000000000000..f005c47a3aa6
@@ -0,0 +1,23 @@
+#!/bin/bash -
+#SPDX-License-Identifier: GPL-2.0
+#===============================================================================
+#
+#          FILE: kernel_modules_info.sh
+#
+#         USAGE: ./kernel_modules_info.sh
+#
+#   DESCRIPTION:  Running kernel modules information.
+#
+#       OPTIONS: ---
+#  REQUIREMENTS: awk
+#          BUGS: ---

scripts/kernel_modules_info.sh line 23

Quoted 10 lines
scripts/kernel_modules_info.sh new file +10 -0
+#         NOTES: ---
+#        AUTHOR: Bhaskar Chowdhury (https://about.me/unixbhaskar), [email protected]
+#  ORGANIZATION: Independent
+#       CREATED: 12/03/2019 13:52
+#      REVISION:  ---
+#===============================================================================
+
+set -o nounset                              # Treat unset variables as an error
+
+awk '{print $1}' "/proc/modules" | xargs modinfo | awk '/^(filename|desc|depends)/'

I want to see a good reason (e.g. useful for other developers) for upstreaming. This script looks like your custom script, which you can maintain locally.

Signature · 2 lines
Best Regards
Masahiro Yamada
#2 lore raw
Quoted 37 lines · Masahiro Yamada
Quoted 36 lines · Bhaskar Chowdhury

This is new file to show running kernel modules list.One line bash script.

---
 scripts/kernel_modules_info.sh | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100755 scripts/kernel_modules_info.sh
scripts/kernel_modules_info.sh new file +20 -0
new file mode 100755
index 000000000000..f005c47a3aa6
@@ -0,0 +1,23 @@
+#!/bin/bash -
+#SPDX-License-Identifier: GPL-2.0
+#===============================================================================
+#
+#          FILE: kernel_modules_info.sh
+#
+#         USAGE: ./kernel_modules_info.sh
+#
+#   DESCRIPTION:  Running kernel modules information.
+#
+#       OPTIONS: ---
+#  REQUIREMENTS: awk
+#          BUGS: ---
+#         NOTES: ---
+#        AUTHOR: Bhaskar Chowdhury (https://about.me/unixbhaskar), [email protected]
+#  ORGANIZATION: Independent
+#       CREATED: 12/03/2019 13:52
+#      REVISION:  ---
+#===============================================================================
+
Quoted 8 lines

scripts/kernel_modules_info.sh line 23

Quoted 3 lines
scripts/kernel_modules_info.sh new file +3 -0
+set -o nounset                              # Treat unset variables as an error
+
+awk '{print $1}' "/proc/modules" | xargs modinfo | awk '/^(filename|desc|depends)/'

I want to see a good reason (e.g. useful for other developers) for upstreaming. This script looks like your custom script, which you can maintain locally.

I think the usefulness comes from developers wants to see what are the modules are using by the running kernel in formatted way.

This is very simple way to enlist all the modules with descriptions of it.So , they can easily parse it with other scripts.

I believe you have already copy and paste the single line on your terminal to see the output it produces, if not, I have already sent a mail which includes the out of it.

If and only if, no other tool or mechanism(which might have skips my eyes and knowledge) to find and display information this way.

Kindly, share me the other way , you can achieve that. This is a generic script,and expecting stuff in common place, so everybody can use it.No, special requirement is needed.

Here is little output,if you missed my other mail with it...

filename:/lib/modules/5.4.1-arch1-1ArchLinux-5.4.1/kernel/drivers/usb/host/xhci-pci.ko.xz

description:    xHCI PCI Host Controller Driver
depends:        xhci-hcd

These output can be parse by other scripts too(cliche...sorry) ..

Thanks,
Bhaskar

Quoted 5 lines
Signature · 3 lines
-- 
Best Regards
Masahiro Yamada
#3 lore raw

On 04.12.19 05:22, Bhaskar Chowdhury wrote:

Hi,

Quoted 4 lines

I think the usefulness comes from developers wants to see what are the modules are using by the running kernel in formatted way. This is very simple way to enlist all the modules with descriptions of it.So , they can easily parse it with other scripts.

IMHO, this is a good thing to have. I can even imagine it shipped by distros, for better bug reports.

OTOH, if it's about the currently running kernel and loaded modules, why not putting this into /proc or /sys ?

--mtx

Signature · 12 lines
Dringender Hinweis: aufgrund existenzieller Bedrohung durch "Emotet"
sollten Sie *niemals* MS-Office-Dokumente via E-Mail annehmen/öffenen,
selbst wenn diese von vermeintlich vertrauenswürdigen Absendern zu
stammen scheinen. Andernfalls droht Totalschaden.
---
Hinweis: unverschlüsselte E-Mails können leicht abgehört und manipuliert
werden ! Für eine vertrauliche Kommunikation senden Sie bitte ihren
GPG/PGP-Schlüssel zu.
---
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
[email protected] -- +49-151-27565287
#4 lore raw
Quoted 9 lines · metux IT consult

On 04.12.19 05:22, Bhaskar Chowdhury wrote:

Hi,

Quoted 4 lines

I think the usefulness comes from developers wants to see what are the modules are using by the running kernel in formatted way. This is very simple way to enlist all the modules with descriptions of it.So , they can easily parse it with other scripts.

Quoted 5 lines

IMHO, this is a good thing to have. I can even imagine it shipped by distros, for better bug reports.

OTOH, if it's about the currently running kernel and loaded modules, why not putting this into /proc or /sys ?

The reason being not putting in the /proc or /sys is, it is not dynamically generated stuff. This is small script which do a specific task ,out of the information available in /proc or /sys.

And essentially resides in the scripts directory for easy finding and using.

:)

~Bhaskar

Quoted 17 lines

--mtx

Signature · 12 lines
Dringender Hinweis: aufgrund existenzieller Bedrohung durch "Emotet"
sollten Sie *niemals* MS-Office-Dokumente via E-Mail annehmen/�ffenen,
selbst wenn diese von vermeintlich vertrauensw�rdigen Absendern zu
stammen scheinen. Andernfalls droht Totalschaden.
---
Hinweis: unverschl�sselte E-Mails k�nnen leicht abgeh�rt und manipuliert
werden ! F�r eine vertrauliche Kommunikation senden Sie bitte ihren
GPG/PGP-Schl�ssel zu.
---
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
[email protected] -- +49-151-27565287
#5 lore raw
In reply to Masahiro Yamada
Quoted 5 lines · Masahiro Yamada
Quoted 1 line · Bhaskar Chowdhury

+awk '{print $1}' "/proc/modules" | xargs modinfo | awk '/^(filename|desc|depends)/'

I want to see a good reason (e.g. useful for other developers) for upstreaming. This script looks like your custom script, which you can maintain locally.

I think the verbosity should be added to either lsmod or modinfo, not some script in kernel git.

#6 lore raw
Quoted 9 lines · David Sterba
Quoted 5 lines · Masahiro Yamada
Quoted 1 line · Bhaskar Chowdhury

+awk '{print $1}' "/proc/modules" | xargs modinfo | awk '/^(filename|desc|depends)/'

I want to see a good reason (e.g. useful for other developers) for upstreaming. This script looks like your custom script, which you can maintain locally.

I think the verbosity should be added to either lsmod or modinfo, not some script in kernel git.

lsmod and modinfo already are pretty verbose and the one liner is using one of them to cut thing out of it....can you give it another look???

Moreover,this is sort and precise and can be parsed by other scripts.

The whole point behind this is to give the developers a convenient point without going through all the rigorous details.

A message that is not in the archive (sent off-list or not yet received): CAK7LNARdOGfvc_8TMX+KbJQ1DRGy8_xZsdDye1ZrvimSS1VoFQ@mail.gmail.com

#8 lore raw
Quoted 28 lines · Masahiro Yamada

On Thu, Dec 5, 2019 at 12:25 PM Bhaskar Chowdhury <[1][email protected]> wrote:

On 16:07 Wed 04 Dec 2019, David Sterba wrote:
>On Wed, Dec 04, 2019 at 12:10:25PM +0900, Masahiro Yamada wrote:
>> On Tue, Dec 3, 2019 at 6:49 PM Bhaskar Chowdhury <[2][email protected]> wrote:
>> > +awk '{print $1}' "/proc/modules" | xargs modinfo | awk '/^(filename|desc|depends)/'
>>
>> I want to see a good reason (e.g. useful for other developers) for upstreaming.
>> This script looks like your custom script, which you can maintain locally.
>
>I think the verbosity should be added to either lsmod or modinfo, not
>some script in kernel git.
lsmod and modinfo already are pretty verbose and the one liner is using
one of them to cut thing out of it....can you give it another look???
Moreover,this is sort and precise and can be parsed by other scripts.
The whole point behind this is to give the developers a convenient point
without going through all the rigorous details.

Quoted 12 lines

lsmod and modinfo are good.
If you are not satisfied with the current format, talk to the kmod maintainer.
As a maintainer, I need to avoid the situation where upstream tree is flooded with weird scripts like this. One more thing:
Despite advice from Randy over again,
you are still not able to submit a patch correctly. (see what you sent as v2).
Do not get me wrong. I am not saying you to send v3. I do not like this patch. Please stop.
--

I completely get you. I should stop sending this. Thanks for the heads up.

And I was not denying the verbosity of lsmod and modinfo , as I was pointing out to someone else.

About the V2, this was a mistake , I know once I saw it alas! after sending it you. So, my apology.

One thing get it straight , I am NOT trying to flooding with some airy fairy script , I know what it takes to maintain that bloody thing.

Your time is precious like mine, never try to gobbles it by sending garbage.

I was thinking make it easy for others, not sure why you think it's wired.

Again , thanks for the heads up...above statements are STRICTLY NOT in my defence not to cover the mistake.

Quoted 7 lines

Best Regards
Masahiro Yamada

References

1. mailto:[email protected]
2. mailto:[email protected]

#9 lore raw
In reply to Bhaskar Chowdhury

On 05.12.19 04:25, Bhaskar Chowdhury wrote:

Hi,

Quoted 2 lines

The whole point behind this is to give the developers a convenient point without going through all the rigorous details.

I see your point, but I wonder whether it maybe better should go into kmod.

--mtx

---
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
[email protected] -- +49-151-27565287