edid-decode: DisplayID additions
PATCH 1/5 edid-decode: DisplayID additions
- Decode "Display Parameters Block". Example in lg-ultrafine-5k*.
- Decode "CTA Timings Block". Similar to "Type 1 VESA DMT Timings Block".
- Decode "GP ASCII String Block". Example in dell-up2715k-mdp-switchresx.
- Added DisplayID 2.0 tags:
- Decode "Display Interface Features Data Block". Example in acer-xv273k* but it appears to be missing the "Minimum pixel rate at which YCbCr 4:2:0 encoding is supported" byte.
- Decode "ContainerID Data Block". Example in lg-ultrafine-5k*
- Unknown DisplayID blocks are dumped as hex.
- Add DisplayID 2.0 spec to man page.
- Show DisplayID tag hex byte to make it possible to distinguish between DisplayID 1.3 and 2.0 spec blocks of the same name.
- Show DisplayID product type.
- Renamed Type* blocks to distinguish between different types of Video Timing Modes and Supported Timing Modes.
- Check padding after DisplayID checksum.
- Add more checks for DisplayID length and revision.
- Move Tiled Topology decode to new function.
--- edid-decode.1 | 4 +- edid-decode.h | 2 + parse-base-block.cpp | 2 +- parse-cta-block.cpp | 2 +- parse-displayid-block.cpp | 446 ++++++++++++++++++++++++++++++++------ 5 files changed, 386 insertions(+), 70 deletions(-)
edid-decode.1 +3 -1
@@ -55,10 +55,12 @@ SPWG Notebook Panel Specification, Version 3.5 EPI Embedded Panel Interface, Revision 1.0 .RE .TP -The following EDID standard is partially supported by edid-decode: +The following EDID standards are partially supported by edid-decode: .RS .TP DisplayID 1.3: VESA Display Identification Data (DisplayID) Standard, Version 1.3 +.TP +DisplayID 2.0: VESA DisplayID Standard, Version 2.0 .RE .SH OPTIONS
edid-decode.h +2 -0
@@ -146,5 +146,7 @@ std::string block_name(unsigned char block); void print_timings(edid_state &state, const char *prefix, const struct timings *t, const char *suffix);const struct timings *find_dmt_id (unsigned char dmt_id); +const struct timings *vic_to_mode (unsigned char vic); +char *extract_string (const unsigned char *x,unsigned len);#endif
parse-base-block.cpp +1 -1
@@ -773,7 +773,7 @@ void edid_state::detailed_cvt_descriptor(const unsigned char *x, bool first) } /* extract a string from a detailed subblock, checking for termination */ -static char *extract_string(const unsigned char *x, unsigned len) +char *extract_string(const unsigned char *x, unsigned len) { static char s[EDID_PAGE_SIZE]; int seen_newline = 0;
parse-cta-block.cpp +1 -1
@@ -191,7 +191,7 @@ static const struct timings edid_cta_modes2[] = { static const unsigned char edid_hdmi_mode_map[] = { 95, 94, 93, 98 }; -static const struct timings *vic_to_mode(unsigned char vic) +const struct timings *vic_to_mode(unsigned char vic) { if (vic > 0 && vic <= ARRAY_SIZE(edid_cta_modes1)) return edid_cta_modes1 + vic - 1;
parse-displayid-block.cpp +379 -67
495 lines not on this page · raw message
Signature · 1 line
2.21.0 (Apple Git-122.2)
PATCH 2/5 edid-decode: Change horizontal frequency to kHz
Change Monitor Ranges error message to use kHz for horizontal frequency.
--- edid-decode.cpp | 32 ++++++++++++++------------------ 1 file changed, 14 insertions(+), 18 deletions(-)
edid-decode.cpp +14 -18
@@ -735,26 +735,22 @@ int edid_state::parse_edid() * EDID 1.4 states (in an Errata) that explicitly defined * timings supersede the monitor range definition. */ + char buf[512]; + snprintf(buf, sizeof(buf), + "One or more of the timings is out of range of the Monitor Ranges:\n" + " Vertical Freq: %u - %u Hz (Monitor: %u - %u Hz)\n" + " Horizontal Freq: %.3f - %.3f kHz (Monitor: %.3f - %.3f kHz)\n" + " Maximum Clock: %.3f MHz (Monitor: %.3f MHz)\n", + min_vert_freq_hz, max_vert_freq_hz, + min_display_vert_freq_hz, max_display_vert_freq_hz, + min_hor_freq_hz / 1000.0, max_hor_freq_hz / 1000.0, + min_display_hor_freq_hz / 1000.0, max_display_hor_freq_hz / 1000.0, + max_pixclk_khz / 1000.0, max_display_pixclk_khz / 1000.0); + if (edid_minor < 4) { - fail("One or more of the timings is out of range of the Monitor Ranges:\n" - " Vertical Freq: %u - %u Hz (Monitor: %u - %u Hz)\n" - " Horizontal Freq: %u - %u Hz (Monitor: %u - %u Hz)\n" - " Maximum Clock: %.3f MHz (Monitor: %.3f MHz)\n", - min_vert_freq_hz, max_vert_freq_hz, - min_display_vert_freq_hz, max_display_vert_freq_hz, - min_hor_freq_hz, max_hor_freq_hz, - min_display_hor_freq_hz, max_display_hor_freq_hz, - max_pixclk_khz / 1000.0, max_display_pixclk_khz / 1000.0); + fail("%s", buf); } else { - warn("One or more of the timings is out of range of the Monitor Ranges:\n" - " Vertical Freq: %u - %u Hz (Monitor: %u - %u Hz)\n" - " Horizontal Freq: %u - %u Hz (Monitor: %u - %u Hz)\n" - " Maximum Clock: %.3f MHz (Monitor: %.3f MHz)\n", - min_vert_freq_hz, max_vert_freq_hz, - min_display_vert_freq_hz, max_display_vert_freq_hz, - min_hor_freq_hz, max_hor_freq_hz, - min_display_hor_freq_hz, max_display_hor_freq_hz, - max_pixclk_khz / 1000.0, max_display_pixclk_khz / 1000.0); + warn("%s", buf); } }
Signature · 1 line
2.21.0 (Apple Git-122.2)
PATCH 3/5 edid-decode: more back/front porch switching
In reply to joevtFix more instances where back porch is actually front porch (problem started when "so = sync offset" was mistaken for "bp = back porch" instead of "fp = front porch").
--- parse-base-block.cpp | 12 ++++++------ parse-displayid-block.cpp | 4 ++-- 2 files changed, 8 insertions(+), 8 deletions(-)
parse-base-block.cpp +6 -6
@@ -1302,13 +1302,13 @@ void edid_state::detailed_timings(const char *prefix, const unsigned char *x) bool ok = true; - if (!t.w || !hbl || !t.hbp || !t.hsync || !t.h || !vbl || !t.vbp || !t.vsync) { + if (!t.w || !hbl || !t.hfp || !t.hsync || !t.h || !vbl || !t.vfp || !t.vsync) { fail("0 values in the detailed timings:\n" " Horizontal Active/Blanking %u/%u\n" - " Horizontal Backporch/Sync Width %u/%u\n" + " Horizontal Frontporch/Sync Width %u/%u\n" " Vertical Active/Blanking %u/%u\n" - " Vertical Backporch/Sync Width %u/%u\n", - t.w, hbl, t.hbp, t.hsync, t.h, vbl, t.vbp, t.vsync); + " Vertical Frontporch/Sync Width %u/%u\n", + t.w, hbl, t.hfp, t.hsync, t.h, vbl, t.vfp, t.vsync); ok = false; }
@@ -1324,10 +1324,10 @@ void edid_state::detailed_timings(const char *prefix, const unsigned char *x) t.pixclk_khz / 1000.0, t.hor_mm, t.vert_mm, prefix, - t.w, t.w + t.hbp, t.w + t.hbp + t.hsync, t.w + hbl, t.hfp, t.hsync, t.hbp, + t.w, t.w + t.hfp, t.w + t.hfp + t.hsync, t.w + hbl, t.hfp, t.hsync, t.hbp, t.hborder ? (std::string(" hborder ") + std::to_string(t.hborder)).c_str() : "", prefix, - t.h, t.h + t.vbp, t.h + t.vbp + t.vsync, t.h + vbl, t.vfp, t.vsync, t.vbp, + t.h, t.h + t.vfp, t.h + t.vfp + t.vsync, t.h + vbl, t.vfp, t.vsync, t.vbp, t.vborder ? (std::string(" vborder ") + std::to_string(t.vborder)).c_str() : "", prefix, s_sync.c_str(), s_flags.c_str(),
parse-displayid-block.cpp +2 -2
@@ -176,8 +176,8 @@ static void parse_displayid_detailed_timing(const unsigned char *x) " %chsync %cvsync\n" " VertFreq: %.3f Hz, HorFreq: %.3f kHz\n", (double)t.pixclk_khz/1000.0, s.c_str(), - t.w, t.w + t.hbp, t.w + t.hbp + t.hsync, t.w + hbl, t.hfp, t.hsync, t.hbp, - t.h, t.h + t.vbp, t.h + t.vbp + t.vsync, t.h + vbl, t.vfp, t.vsync, t.vbp, + t.w, t.w + t.hfp, t.w + t.hfp + t.hsync, t.w + hbl, t.hfp, t.hsync, t.hbp, + t.h, t.h + t.vfp, t.h + t.vfp + t.vsync, t.h + vbl, t.vfp, t.vsync, t.vbp, t.pos_pol_hsync ? '+' : '-', t.pos_pol_vsync ? '+' : '-', (t.pixclk_khz * 1000.0) / ((t.w + hbl) * (t.h + vbl)), (double)(t.pixclk_khz) / (t.w + hbl)
Signature · 1 line
2.21.0 (Apple Git-122.2)
PATCH 4/5 edid-decode: CTA extension block cleanup
In reply to joevtReduced tag parsing code.
Added OUI min block length checks.
--- edid-decode.h | 1 + parse-cta-block.cpp | 336 ++++++++++++++++++-------------------------- 2 files changed, 138 insertions(+), 199 deletions(-)
edid-decode.h +1 -0
@@ -111,6 +111,7 @@ struct edid_state {void cta_y420cmdb (const unsigned char *x,unsigned length);void cta_vfpdb (const unsigned char *x,unsigned length);void cta_hdmi_block (const unsigned char *x,unsigned length); +void cta_oui (const char *block_name,const unsigned char *x,unsigned length,unsigned *ouinum);void cta_block (const unsigned char *x);void preparse_cta_block (const unsigned char *x);void parse_cta_block (const unsigned char *x);
parse-cta-block.cpp +137 -199
372 lines not on this page · raw message
Signature · 1 line
2.21.0 (Apple Git-122.2)
Re: [PATCH 4/5] edid-decode: CTA extension block cleanup
Hi Joe,
I've committed the other patches, but I'm not sure about this one. I'll look at it again when I have more time. I might make my own implementation based on ideas of this patch.
BTW, I made a real mess with the back/front porch timings. Thanks for fixing that!
Regards,
Hans
Quoted 402 lines · joevt
Reduced tag parsing code.
Added OUI min block length checks.Signed-off-by Joe van Tunen <[email protected]>--- edid-decode.h | 1 + parse-cta-block.cpp | 336 ++++++++++++++++++-------------------------- 2 files changed, 138 insertions(+), 199 deletions(-)edid-decode.h +1
-0@@ -111,6 +111,7 @@ struct edid_state {void cta_y420cmdb (const unsigned char *x,unsigned length);void cta_vfpdb (const unsigned char *x,unsigned length);void cta_hdmi_block (const unsigned char *x,unsigned length); +void cta_oui (const char *block_name,const unsigned char *x,unsigned length,unsigned *ouinum);void cta_block (const unsigned char *x);void preparse_cta_block (const unsigned char *x);void parse_cta_block (const unsigned char *x);parse-cta-block.cpp +137
-199@@ -375,6 +375,11 @@ void edid_state::cta_svd(const unsigned char *x, unsigned n, int for_ycbcr420) if (vic == 1 && !for_ycbcr420) has_cta861_vic_1 = 1; + + // vics and has_vic are basically the same (if has_vic was not bool), except vics + // is built after preparse (during parse) which allows errors for duplicates to be + // output in parse order. has_vic is built during preparse and is used when vics + // from other blocks need to be checked. if (++vics[vic][for_ycbcr420] == 2) fail("Duplicate %sVIC %u\n", for_ycbcr420 ? "YCbCr 4:2:0 " : "", vic); if (for_ycbcr420 && has_vic[0][vic])@@ -485,7 +490,6 @@ void edid_state::cta_hdmi_block(const unsigned char *x, unsigned length) { unsigned len_vic, len_3d; - printf(" (HDMI)\n"); printf(" Source physical address %u.%u.%u.%u\n", x[3] >> 4, x[3] & 0x0f, x[4] >> 4, x[4] & 0x0f);@@ -1228,10 +1232,20 @@ static void cta_hdmi_audio_block(const unsigned char *x, unsigned length) x += 4; } } +const unsigned kOUI_Unknown = 1<<12; +const unsigned kOUI_HDMI = 2<<12; +const unsigned kOUI_HDMIForum = 3<<12; +const unsigned kOUI_HDR10 = 4<<12; -static const char *oui_name(unsigned oui) +static const char *oui_name(unsigned oui, unsigned *ouinum = NULL) { + unsigned ouinumscratch; + if (!ouinum) ouinum = &ouinumscratch; + *ouinum = kOUI_Unknown; switch (oui) { + case 0x000c03: *ouinum = kOUI_HDMI ; return "HDMI"; + case 0xc45dd8: *ouinum = kOUI_HDMIForum ; return "HDMI Forum"; + case 0x90848b: *ouinum = kOUI_HDR10 ; return "HDR10+"; case 0x00001a: return "AMD"; case 0x00044b: return "NVIDIA"; case 0x000c6e: return "ASUS";@@ -1244,212 +1258,136 @@ static const char *oui_name(unsigned oui) } } +void edid_state::cta_oui(const char *block_name, const unsigned char *x, unsigned length, unsigned *ouinum) +{ + char buf[10]; + unsigned oui; + + if (length < 3) { + oui = 0xffffffff; + sprintf(buf, "?"); + } else { + oui = (x[2] << 16) + (x[1] << 8) + x[0]; + sprintf(buf, "0x%06x", oui); + } + + const char *ouiname = oui_name(oui, ouinum); + std::string name = std::string(block_name) + ", OUI " + buf; + if (ouiname) name += std::string(" (") + ouiname + ")"; + data_block = name; + + if (oui == 0xffffffff) + fail("CTA data block is not long enough to contain an OUI\n"); +} + +#define data_block_o(n) cta_oui(n, x + 1 + extended, length - extended, &ouinum) + void edid_state::cta_block(const unsigned char *x) { - static int last_block_was_hdmi_vsdb; - static int have_hf_vsdb, have_hf_scdb; - static int first_block = 1; + static unsigned previous_cta_tag = 0; + static bool have_hf_vsdb = false; + static bool have_hf_scdb = false; + static unsigned cta_block_number = 0; + unsigned length = x[0] & 0x1f; - const char *name; - unsigned oui; + unsigned ouinum = 0; + unsigned tag=(x[0] & 0xe0) >> 5; + unsigned extended = tag == 0x07 ? 1 : 0; + if (extended) tag = 0x700 + x[1]; + + switch (tag) { + case 0x001: data_block = "Audio Data Block"; break; + case 0x002: data_block = "Video Data Block"; break; + case 0x003: data_block_o("Vendor-Specific Data Block"); break; + case 0x004: data_block = "Speaker Allocation Data Block"; break; + case 0x005: data_block = "VESA DTC Data Block"; break; // not implemented + + case 0x700: data_block = "Video Capability Data Block"; break; + case 0x701: data_block_o("Vendor-Specific Video Data Block"); break; + case 0x702: data_block = "VESA Video Display Device Data Block"; break; // not implemented + case 0x703: data_block = "VESA Video Timing Block Extension"; break; // not implemented + case 0x704: data_block = "Reserved for HDMI Video Data Block"; break; // reserved + case 0x705: data_block = "Colorimetry Data Block"; break; + case 0x706: data_block = "HDR Static Metadata Data Block"; break; + case 0x707: data_block = "HDR Dynamic Metadata Data Block"; break; + + case 0x70d: data_block = "Video Format Preference Data Block"; break; + case 0x70e: data_block = "YCbCr 4:2:0 Video Data Block"; break; + case 0x70f: data_block = "YCbCr 4:2:0 Capability Map Data Block"; break; + case 0x710: data_block = "Reserved for CTA Miscellaneous Audio Fields"; break; // reserved + case 0x711: data_block_o("Vendor-Specific Audio Data Block"); break; // no vendors implemented + case 0x712: data_block = "HDMI Audio Data Block"; break; + case 0x713: data_block = "Room Configuration Data Block"; break; + case 0x714: data_block = "Speaker Location Data Block"; break; + + case 0x720: data_block = "InfoFrame Data Block"; break; + + case 0x778: data_block = "HDMI Forum EDID Extension Override Data Block"; break; + case 0x779: data_block = "HDMI Forum Sink Capability Data Block"; break; + default: + if (tag < 0x700) data_block = "Unknown CTA Data Block"; + else if (tag < 0x70d) data_block = "Unknown CTA Video-Related Data Block"; + else if (tag < 0x720) data_block = "Unknown CTA Audio-Related Data Block"; + else if (tag < 0x778) data_block = "Unknown CTA Data Block"; + else if (tag < 0x780) data_block = "Unknown CTA HDMI-Related Data Block"; + else data_block = "Unknown CTA Data Block"; + data_block += std::string(" (") + (extended ? "extended " : "") + "tag " + utohex(tag & 0xff) + ")"; + } - switch ((x[0] & 0xe0) >> 5) { - case 0x01: - data_block = "Audio Data Block"; - printf(" %s\n", data_block.c_str()); - cta_audio_block(x + 1, length); + printf(" %s\n", data_block.c_str()); + + tag |= ouinum; + switch (tag) { + case 0x001: cta_audio_block(x + 1, length); break; + case 0x002: cta_svd(x + 1, length, 0); break; + case 0x003|kOUI_HDMI: + cta_hdmi_block(x + 1, length); + if (edid_minor != 3) + fail("The HDMI Specification uses EDID 1.3, not 1.%u\n", edid_minor); break; - case 0x02: - data_block = "Video Data Block"; - printf(" %s\n", data_block.c_str()); - cta_svd(x + 1, length, 0); + case 0x003|kOUI_HDMIForum: + if (previous_cta_tag != (0x003|kOUI_HDMI)) + fail("HDMI Forum VSDB did not immediately follow the HDMI VSDB\n"); + if (have_hf_scdb || have_hf_vsdb) + fail("Duplicate HDMI Forum VSDB/SCDB\n"); + cta_hf_scdb(x + 4, length - 3); + have_hf_vsdb = true; break; - case 0x03: - oui = (x[3] << 16) + (x[2] << 8) + x[1]; - printf(" Vendor-Specific Data Block, OUI 0x%06x", oui); - name = oui_name(oui); - if (oui == 0x000c03) { - data_block = "Vendor-Specific Data Block (HDMI)"; - cta_hdmi_block(x + 1, length); - last_block_was_hdmi_vsdb = 1; - first_block = 0; - if (edid_minor != 3) - fail("The HDMI Specification uses EDID 1.3, not 1.%u\n", edid_minor); - return; - } - if (oui == 0xc45dd8) { - data_block = "Vendor-Specific Data Block (HDMI Forum)"; - if (!last_block_was_hdmi_vsdb) - fail("HDMI Forum VSDB did not immediately follow the HDMI VSDB\n"); - if (have_hf_scdb || have_hf_vsdb) - fail("Duplicate HDMI Forum VSDB/SCDB\n"); - printf(" (HDMI Forum)\n"); - cta_hf_scdb(x + 4, length - 3); - have_hf_vsdb = 1; - } else if (name) { - data_block = std::string("Vendor-Specific Data Block (") + name + ")"; - printf(" (%s)\n", name); - hex_block(" ", x + 4, length - 3); - } else { - printf("\n"); - hex_block(" ", x + 4, length - 3); - data_block.clear(); - warn("Unknown Vendor-Specific Data Block, OUI 0x%06x\n", oui); - } - break; - case 0x04: - data_block = "Speaker Allocation Data Block"; - printf(" %s\n", data_block.c_str()); - cta_sadb(x + 1, length); - break; - case 0x05: - printf(" VESA DTC Data Block\n"); - hex_block(" ", x + 1, length); - break; - case 0x07: - printf(" Extended tag: "); - switch (x[1]) { - case 0x00: - data_block = "Video Capability Data Block"; - printf("%s\n", data_block.c_str()); - cta_vcdb(x + 2, length - 1); - break; - case 0x01: - oui = (x[4] << 16) + (x[3] << 8) + x[2]; - printf("Vendor-Specific Video Data Block, OUI 0x%06x", oui); - name = oui_name(oui); - if (oui == 0x90848b) { - data_block = "Vendor-Specific Video Data Block (HDR10+)"; - printf(" (HDR10+)\n"); - cta_hdr10plus(x + 5, length - 4); - } else if (name) { - data_block = std::string("Vendor-Specific Data Block (") + name + ")"; - printf(" (%s)\n", name); - hex_block(" ", x + 5, length - 4); - } else { - printf("\n"); - hex_block(" ", x + 5, length - 4); - data_block.clear(); - warn("Unknown Extended Vendor-Specific Data Block, OUI 0x%06x\n", oui); - } - break; - case 0x02: - printf("VESA Video Display Device Data Block\n"); - hex_block(" ", x + 2, length - 1); - break; - case 0x03: - printf("VESA Video Timing Block Extension\n"); - hex_block(" ", x + 2, length - 1); - break; - case 0x04: - printf("Reserved for HDMI Video Data Block\n"); - hex_block(" ", x + 2, length - 1); - break; - case 0x05: - data_block = "Colorimetry Data Block"; - printf("%s\n", data_block.c_str()); - cta_colorimetry_block(x + 2, length - 1); - break; - case 0x06: - data_block = "HDR Static Metadata Data Block"; - printf("%s\n", data_block.c_str()); - cta_hdr_static_metadata_block(x + 2, length - 1); - break; - case 0x07: - data_block = "HDR Dynamic Metadata Data Block"; - printf("%s\n", data_block.c_str()); - cta_hdr_dyn_metadata_block(x + 2, length - 1); - break; - case 0x0d: - data_block = "Video Format Preference Data Block"; - printf("%s\n", data_block.c_str()); - cta_vfpdb(x + 2, length - 1); - break; - case 0x0e: - data_block = "YCbCr 4:2:0 Video Data Block"; - printf("%s\n", data_block.c_str()); - cta_svd(x + 2, length - 1, 1); - break; - case 0x0f: - data_block = "YCbCr 4:2:0 Capability Map Data Block"; - printf("%s\n", data_block.c_str()); - cta_y420cmdb(x + 2, length - 1); - break; - case 0x10: - printf("Reserved for CTA Miscellaneous Audio Fields\n"); - hex_block(" ", x + 2, length - 1); - break; - case 0x11: - printf("Vendor-Specific Audio Data Block\n"); - hex_block(" ", x + 2, length - 1); - break; - case 0x12: - data_block = "HDMI Audio Data Block"; - printf("%s\n", data_block.c_str()); - cta_hdmi_audio_block(x + 2, length - 1); - break; - case 0x13: - data_block = "Room Configuration Data Block"; - printf("%s\n", data_block.c_str()); - cta_rcdb(x + 2, length - 1); - break; - case 0x14: - data_block = "Speaker Location Data Block"; - printf("%s\n", data_block.c_str()); - cta_sldb(x + 2, length - 1); - break; - case 0x20: - printf("InfoFrame Data Block\n"); - cta_ifdb(x + 2, length - 1); - break; - case 0x78: - data_block = "HDMI Forum EDID Extension Override Data Block"; - printf("%s\n", data_block.c_str()); - cta_hf_eeodb(x + 2, length - 1); - // This must be the first CTA block - if (!first_block) - fail("Block starts at a wrong offset\n"); - break; - case 0x79: - data_block = "HDMI Forum Sink Capability Data Block"; - printf("%s\n", data_block.c_str()); - if (!last_block_was_hdmi_vsdb) - fail("HDMI Forum SCDB did not immediately follow the HDMI VSDB\n"); - if (have_hf_scdb || have_hf_vsdb) - fail("Duplicate HDMI Forum VSDB/SCDB\n"); - if (x[2] || x[3]) - printf(" Non-zero SCDB reserved fields!\n"); - cta_hf_scdb(x + 4, length - 3); - have_hf_scdb = 1; - break; - default: - if (x[1] <= 12) - printf("Unknown CTA Video-Related"); - else if (x[1] <= 31) - printf("Unknown CTA Audio-Related"); - else if (x[1] >= 120 && x[1] <= 127) - printf("Unknown CTA HDMI-Related"); - else - printf("Unknown CTA"); - printf(" Data Block (extended tag 0x%02x, length %u)\n", x[1], length - 1); - hex_block(" ", x + 2, length - 1); - data_block.clear(); - warn("Unknown Extended CTA Data Block 0x%02x\n", x[1]); - break; - } + case 0x004: cta_sadb(x + 1, length); break; + case 0x700: cta_vcdb(x + 2, length - 1); break; + case 0x701|kOUI_HDR10: cta_hdr10plus(x + 5, length - 4); break; + case 0x705: cta_colorimetry_block(x + 2, length - 1); break; + case 0x706: cta_hdr_static_metadata_block(x + 2, length - 1); break; + case 0x707: cta_hdr_dyn_metadata_block(x + 2, length - 1); break; + case 0x70d: cta_vfpdb(x + 2, length - 1); break; + case 0x70e: cta_svd(x + 2, length - 1, 1); break; + case 0x70f: cta_y420cmdb(x + 2, length - 1); break; + case 0x712: cta_hdmi_audio_block(x + 2, length - 1); break; + case 0x713: cta_rcdb(x + 2, length - 1); break; + case 0x714: cta_sldb(x + 2, length - 1); break; + case 0x720: cta_ifdb(x + 2, length - 1); break; + case 0x778: + cta_hf_eeodb(x + 2, length - 1); + // This must be the first CTA block + if (cta_block_number != 0) + fail("Block starts at a wrong offset\n"); break; - default: { - unsigned tag = (*x & 0xe0) >> 5; - unsigned length = *x & 0x1f; - printf(" Unknown CTA tag 0x%02x, length %u\n", tag, length); - hex_block(" ", x + 1, length); - data_block.clear(); - warn("Unknown CTA Data Block %u\n", tag); + case 0x779: + if (previous_cta_tag != (0x003|kOUI_HDMI)) + fail("HDMI Forum SCDB did not immediately follow the HDMI VSDB\n"); + if (have_hf_scdb || have_hf_vsdb) + fail("Duplicate HDMI Forum VSDB/SCDB\n"); + if (x[2] || x[3]) + printf(" Non-zero SCDB reserved fields!\n"); + cta_hf_scdb(x + 4, length - 3); + have_hf_scdb = true; break; + default: + warn("Unknown %s\n", data_block.c_str()); + hex_block(" ", x + 1 + extended + (ouinum ? 3 : 0), length - (extended + (ouinum ? 3 : 0))); } - } - first_block = 0; - last_block_was_hdmi_vsdb = 0; + cta_block_number++; + previous_cta_tag = tag; } void edid_state::preparse_cta_block(const unsigned char *x)
Re: [PATCH 4/5] edid-decode: CTA extension block cleanup
I did some evil things with the switch statement but I think it at least looks nice (for some definitions of nice).
The main idea is to be more like DisplayID. First, there's a switch to get the data_block name. The data_block name is required for error handling so it is obtained first. Instead of a nested switch, it combines the tag and extended tag bytes. The switch obtains an oui for vendor specific data blocks. There's three tags that parse oui (I added oui parsing for audio but none of those are decoded) and now they all use the same oui function.
Second, there's a separate switch for the decode part. This switch combines tag, extended tag, and oui. The duplicate code was unduplicated. There's only one default for outputting hex of unparsed data blocks (instead of 12) - whether they have a normal tag, extended tag, a tag with an oui, or an extended tag with an oui.
On 2019-12-05, 1:38 AM, "Hans Verkuil" <[email protected]> wrote:
Hi Joe,
I've committed the other patches, but I'm not sure about this one. I'll look at
it again when I have more time. I might make my own implementation based on
ideas of this patch.
BTW, I made a real mess with the back/front porch timings. Thanks for fixing that!
Regards,
Hans
On 12/5/19 8:34 AM, joevt wrote:
> Reduced tag parsing code.
> Added OUI min block length checks.
>
> Signed-off-by: Joe van Tunen <[email protected]>
> ---
> edid-decode.h | 1 +
> parse-cta-block.cpp | 336 ++++++++++++++++++--------------------------
> 2 files changed, 138 insertions(+), 199 deletions(-)
>
> diff --git a/edid-decode.h b/edid-decode.h
> index 83ded83..758bdcf 100644
> --- a/edid-decode.h
> +++ b/edid-decode.h
> @@ -111,6 +111,7 @@ struct edid_state {
> void cta_y420cmdb(const unsigned char *x, unsigned length);
> void cta_vfpdb(const unsigned char *x, unsigned length);
> void cta_hdmi_block(const unsigned char *x, unsigned length);
> + void cta_oui(const char *block_name, const unsigned char *x, unsigned length, unsigned *ouinum);
> void cta_block(const unsigned char *x);
> void preparse_cta_block(const unsigned char *x);
> void parse_cta_block(const unsigned char *x);
> diff --git a/parse-cta-block.cpp b/parse-cta-block.cpp
> index dea87c1..e52822a 100644
> --- a/parse-cta-block.cpp
> +++ b/parse-cta-block.cpp
> @@ -375,6 +375,11 @@ void edid_state::cta_svd(const unsigned char *x, unsigned n, int for_ycbcr420)
>
> if (vic == 1 && !for_ycbcr420)
> has_cta861_vic_1 = 1;
> +
> + // vics and has_vic are basically the same (if has_vic was not bool), except vics
> + // is built after preparse (during parse) which allows errors for duplicates to be
> + // output in parse order. has_vic is built during preparse and is used when vics
> + // from other blocks need to be checked.
> if (++vics[vic][for_ycbcr420] == 2)
> fail("Duplicate %sVIC %u\n", for_ycbcr420 ? "YCbCr 4:2:0 " : "", vic);
> if (for_ycbcr420 && has_vic[0][vic])
> @@ -485,7 +490,6 @@ void edid_state::cta_hdmi_block(const unsigned char *x, unsigned length)
> {
> unsigned len_vic, len_3d;
>
> - printf(" (HDMI)\n");
> printf(" Source physical address %u.%u.%u.%u\n", x[3] >> 4, x[3] & 0x0f,
> x[4] >> 4, x[4] & 0x0f);
>
> @@ -1228,10 +1232,20 @@ static void cta_hdmi_audio_block(const unsigned char *x, unsigned length)
> x += 4;
> }
> }
> +const unsigned kOUI_Unknown = 1<<12;
> +const unsigned kOUI_HDMI = 2<<12;
> +const unsigned kOUI_HDMIForum = 3<<12;
> +const unsigned kOUI_HDR10 = 4<<12;
>
> -static const char *oui_name(unsigned oui)
> +static const char *oui_name(unsigned oui, unsigned *ouinum = NULL)
> {
> + unsigned ouinumscratch;
> + if (!ouinum) ouinum = &ouinumscratch;
> + *ouinum = kOUI_Unknown;
> switch (oui) {
> + case 0x000c03: *ouinum = kOUI_HDMI ; return "HDMI";
> + case 0xc45dd8: *ouinum = kOUI_HDMIForum ; return "HDMI Forum";
> + case 0x90848b: *ouinum = kOUI_HDR10 ; return "HDR10+";
> case 0x00001a: return "AMD";
> case 0x00044b: return "NVIDIA";
> case 0x000c6e: return "ASUS";
> @@ -1244,212 +1258,136 @@ static const char *oui_name(unsigned oui)
> }
> }
>
> +void edid_state::cta_oui(const char *block_name, const unsigned char *x, unsigned length, unsigned *ouinum)
> +{
> + char buf[10];
> + unsigned oui;
> +
> + if (length < 3) {
> + oui = 0xffffffff;
> + sprintf(buf, "?");
> + } else {
> + oui = (x[2] << 16) + (x[1] << 8) + x[0];
> + sprintf(buf, "0x%06x", oui);
> + }
> +
> + const char *ouiname = oui_name(oui, ouinum);
> + std::string name = std::string(block_name) + ", OUI " + buf;
> + if (ouiname) name += std::string(" (") + ouiname + ")";
> + data_block = name;
> +
> + if (oui == 0xffffffff)
> + fail("CTA data block is not long enough to contain an OUI\n");
> +}
> +
> +#define data_block_o(n) cta_oui(n, x + 1 + extended, length - extended, &ouinum)
> +
> void edid_state::cta_block(const unsigned char *x)
> {
> - static int last_block_was_hdmi_vsdb;
> - static int have_hf_vsdb, have_hf_scdb;
> - static int first_block = 1;
> + static unsigned previous_cta_tag = 0;
> + static bool have_hf_vsdb = false;
> + static bool have_hf_scdb = false;
> + static unsigned cta_block_number = 0;
> +
> unsigned length = x[0] & 0x1f;
> - const char *name;
> - unsigned oui;
> + unsigned ouinum = 0;
> + unsigned tag=(x[0] & 0xe0) >> 5;
> + unsigned extended = tag == 0x07 ? 1 : 0;
> + if (extended) tag = 0x700 + x[1];
> +
> + switch (tag) {
> + case 0x001: data_block = "Audio Data Block"; break;
> + case 0x002: data_block = "Video Data Block"; break;
> + case 0x003: data_block_o("Vendor-Specific Data Block"); break;
> + case 0x004: data_block = "Speaker Allocation Data Block"; break;
> + case 0x005: data_block = "VESA DTC Data Block"; break; // not implemented
> +
> + case 0x700: data_block = "Video Capability Data Block"; break;
> + case 0x701: data_block_o("Vendor-Specific Video Data Block"); break;
> + case 0x702: data_block = "VESA Video Display Device Data Block"; break; // not implemented
> + case 0x703: data_block = "VESA Video Timing Block Extension"; break; // not implemented
> + case 0x704: data_block = "Reserved for HDMI Video Data Block"; break; // reserved
> + case 0x705: data_block = "Colorimetry Data Block"; break;
> + case 0x706: data_block = "HDR Static Metadata Data Block"; break;
> + case 0x707: data_block = "HDR Dynamic Metadata Data Block"; break;
> +
> + case 0x70d: data_block = "Video Format Preference Data Block"; break;
> + case 0x70e: data_block = "YCbCr 4:2:0 Video Data Block"; break;
> + case 0x70f: data_block = "YCbCr 4:2:0 Capability Map Data Block"; break;
> + case 0x710: data_block = "Reserved for CTA Miscellaneous Audio Fields"; break; // reserved
> + case 0x711: data_block_o("Vendor-Specific Audio Data Block"); break; // no vendors implemented
> + case 0x712: data_block = "HDMI Audio Data Block"; break;
> + case 0x713: data_block = "Room Configuration Data Block"; break;
> + case 0x714: data_block = "Speaker Location Data Block"; break;
> +
> + case 0x720: data_block = "InfoFrame Data Block"; break;
> +
> + case 0x778: data_block = "HDMI Forum EDID Extension Override Data Block"; break;
> + case 0x779: data_block = "HDMI Forum Sink Capability Data Block"; break;
> + default:
> + if (tag < 0x700) data_block = "Unknown CTA Data Block";
> + else if (tag < 0x70d) data_block = "Unknown CTA Video-Related Data Block";
> + else if (tag < 0x720) data_block = "Unknown CTA Audio-Related Data Block";
> + else if (tag < 0x778) data_block = "Unknown CTA Data Block";
> + else if (tag < 0x780) data_block = "Unknown CTA HDMI-Related Data Block";
> + else data_block = "Unknown CTA Data Block";
> + data_block += std::string(" (") + (extended ? "extended " : "") + "tag " + utohex(tag & 0xff) + ")";
> + }
>
> - switch ((x[0] & 0xe0) >> 5) {
> - case 0x01:
> - data_block = "Audio Data Block";
> - printf(" %s\n", data_block.c_str());
> - cta_audio_block(x + 1, length);
> + printf(" %s\n", data_block.c_str());
> +
> + tag |= ouinum;
> + switch (tag) {
> + case 0x001: cta_audio_block(x + 1, length); break;
> + case 0x002: cta_svd(x + 1, length, 0); break;
> + case 0x003|kOUI_HDMI:
> + cta_hdmi_block(x + 1, length);
> + if (edid_minor != 3)
> + fail("The HDMI Specification uses EDID 1.3, not 1.%u\n", edid_minor);
> break;
> - case 0x02:
> - data_block = "Video Data Block";
> - printf(" %s\n", data_block.c_str());
> - cta_svd(x + 1, length, 0);
> + case 0x003|kOUI_HDMIForum:
> + if (previous_cta_tag != (0x003|kOUI_HDMI))
> + fail("HDMI Forum VSDB did not immediately follow the HDMI VSDB\n");
> + if (have_hf_scdb || have_hf_vsdb)
> + fail("Duplicate HDMI Forum VSDB/SCDB\n");
> + cta_hf_scdb(x + 4, length - 3);
> + have_hf_vsdb = true;
> break;
> - case 0x03:
> - oui = (x[3] << 16) + (x[2] << 8) + x[1];
> - printf(" Vendor-Specific Data Block, OUI 0x%06x", oui);
> - name = oui_name(oui);
> - if (oui == 0x000c03) {
> - data_block = "Vendor-Specific Data Block (HDMI)";
> - cta_hdmi_block(x + 1, length);
> - last_block_was_hdmi_vsdb = 1;
> - first_block = 0;
> - if (edid_minor != 3)
> - fail("The HDMI Specification uses EDID 1.3, not 1.%u\n", edid_minor);
> - return;
> - }
> - if (oui == 0xc45dd8) {
> - data_block = "Vendor-Specific Data Block (HDMI Forum)";
> - if (!last_block_was_hdmi_vsdb)
> - fail("HDMI Forum VSDB did not immediately follow the HDMI VSDB\n");
> - if (have_hf_scdb || have_hf_vsdb)
> - fail("Duplicate HDMI Forum VSDB/SCDB\n");
> - printf(" (HDMI Forum)\n");
> - cta_hf_scdb(x + 4, length - 3);
> - have_hf_vsdb = 1;
> - } else if (name) {
> - data_block = std::string("Vendor-Specific Data Block (") + name + ")";
> - printf(" (%s)\n", name);
> - hex_block(" ", x + 4, length - 3);
> - } else {
> - printf("\n");
> - hex_block(" ", x + 4, length - 3);
> - data_block.clear();
> - warn("Unknown Vendor-Specific Data Block, OUI 0x%06x\n", oui);
> - }
> - break;
> - case 0x04:
> - data_block = "Speaker Allocation Data Block";
> - printf(" %s\n", data_block.c_str());
> - cta_sadb(x + 1, length);
> - break;
> - case 0x05:
> - printf(" VESA DTC Data Block\n");
> - hex_block(" ", x + 1, length);
> - break;
> - case 0x07:
> - printf(" Extended tag: ");
> - switch (x[1]) {
> - case 0x00:
> - data_block = "Video Capability Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_vcdb(x + 2, length - 1);
> - break;
> - case 0x01:
> - oui = (x[4] << 16) + (x[3] << 8) + x[2];
> - printf("Vendor-Specific Video Data Block, OUI 0x%06x", oui);
> - name = oui_name(oui);
> - if (oui == 0x90848b) {
> - data_block = "Vendor-Specific Video Data Block (HDR10+)";
> - printf(" (HDR10+)\n");
> - cta_hdr10plus(x + 5, length - 4);
> - } else if (name) {
> - data_block = std::string("Vendor-Specific Data Block (") + name + ")";
> - printf(" (%s)\n", name);
> - hex_block(" ", x + 5, length - 4);
> - } else {
> - printf("\n");
> - hex_block(" ", x + 5, length - 4);
> - data_block.clear();
> - warn("Unknown Extended Vendor-Specific Data Block, OUI 0x%06x\n", oui);
> - }
> - break;
> - case 0x02:
> - printf("VESA Video Display Device Data Block\n");
> - hex_block(" ", x + 2, length - 1);
> - break;
> - case 0x03:
> - printf("VESA Video Timing Block Extension\n");
> - hex_block(" ", x + 2, length - 1);
> - break;
> - case 0x04:
> - printf("Reserved for HDMI Video Data Block\n");
> - hex_block(" ", x + 2, length - 1);
> - break;
> - case 0x05:
> - data_block = "Colorimetry Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_colorimetry_block(x + 2, length - 1);
> - break;
> - case 0x06:
> - data_block = "HDR Static Metadata Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_hdr_static_metadata_block(x + 2, length - 1);
> - break;
> - case 0x07:
> - data_block = "HDR Dynamic Metadata Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_hdr_dyn_metadata_block(x + 2, length - 1);
> - break;
> - case 0x0d:
> - data_block = "Video Format Preference Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_vfpdb(x + 2, length - 1);
> - break;
> - case 0x0e:
> - data_block = "YCbCr 4:2:0 Video Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_svd(x + 2, length - 1, 1);
> - break;
> - case 0x0f:
> - data_block = "YCbCr 4:2:0 Capability Map Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_y420cmdb(x + 2, length - 1);
> - break;
> - case 0x10:
> - printf("Reserved for CTA Miscellaneous Audio Fields\n");
> - hex_block(" ", x + 2, length - 1);
> - break;
> - case 0x11:
> - printf("Vendor-Specific Audio Data Block\n");
> - hex_block(" ", x + 2, length - 1);
> - break;
> - case 0x12:
> - data_block = "HDMI Audio Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_hdmi_audio_block(x + 2, length - 1);
> - break;
> - case 0x13:
> - data_block = "Room Configuration Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_rcdb(x + 2, length - 1);
> - break;
> - case 0x14:
> - data_block = "Speaker Location Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_sldb(x + 2, length - 1);
> - break;
> - case 0x20:
> - printf("InfoFrame Data Block\n");
> - cta_ifdb(x + 2, length - 1);
> - break;
> - case 0x78:
> - data_block = "HDMI Forum EDID Extension Override Data Block";
> - printf("%s\n", data_block.c_str());
> - cta_hf_eeodb(x + 2, length - 1);
> - // This must be the first CTA block
> - if (!first_block)
> - fail("Block starts at a wrong offset\n");
> - break;
> - case 0x79:
> - data_block = "HDMI Forum Sink Capability Data Block";
> - printf("%s\n", data_block.c_str());
> - if (!last_block_was_hdmi_vsdb)
> - fail("HDMI Forum SCDB did not immediately follow the HDMI VSDB\n");
> - if (have_hf_scdb || have_hf_vsdb)
> - fail("Duplicate HDMI Forum VSDB/SCDB\n");
> - if (x[2] || x[3])
> - printf(" Non-zero SCDB reserved fields!\n");
> - cta_hf_scdb(x + 4, length - 3);
> - have_hf_scdb = 1;
> - break;
> - default:
> - if (x[1] <= 12)
> - printf("Unknown CTA Video-Related");
> - else if (x[1] <= 31)
> - printf("Unknown CTA Audio-Related");
> - else if (x[1] >= 120 && x[1] <= 127)
> - printf("Unknown CTA HDMI-Related");
> - else
> - printf("Unknown CTA");
> - printf(" Data Block (extended tag 0x%02x, length %u)\n", x[1], length - 1);
> - hex_block(" ", x + 2, length - 1);
> - data_block.clear();
> - warn("Unknown Extended CTA Data Block 0x%02x\n", x[1]);
> - break;
> - }
> + case 0x004: cta_sadb(x + 1, length); break;
> + case 0x700: cta_vcdb(x + 2, length - 1); break;
> + case 0x701|kOUI_HDR10: cta_hdr10plus(x + 5, length - 4); break;
> + case 0x705: cta_colorimetry_block(x + 2, length - 1); break;
> + case 0x706: cta_hdr_static_metadata_block(x + 2, length - 1); break;
> + case 0x707: cta_hdr_dyn_metadata_block(x + 2, length - 1); break;
> + case 0x70d: cta_vfpdb(x + 2, length - 1); break;
> + case 0x70e: cta_svd(x + 2, length - 1, 1); break;
> + case 0x70f: cta_y420cmdb(x + 2, length - 1); break;
> + case 0x712: cta_hdmi_audio_block(x + 2, length - 1); break;
> + case 0x713: cta_rcdb(x + 2, length - 1); break;
> + case 0x714: cta_sldb(x + 2, length - 1); break;
> + case 0x720: cta_ifdb(x + 2, length - 1); break;
> + case 0x778:
> + cta_hf_eeodb(x + 2, length - 1);
> + // This must be the first CTA block
> + if (cta_block_number != 0)
> + fail("Block starts at a wrong offset\n");
> break;
> - default: {
> - unsigned tag = (*x & 0xe0) >> 5;
> - unsigned length = *x & 0x1f;
> - printf(" Unknown CTA tag 0x%02x, length %u\n", tag, length);
> - hex_block(" ", x + 1, length);
> - data_block.clear();
> - warn("Unknown CTA Data Block %u\n", tag);
> + case 0x779:
> + if (previous_cta_tag != (0x003|kOUI_HDMI))
> + fail("HDMI Forum SCDB did not immediately follow the HDMI VSDB\n");
> + if (have_hf_scdb || have_hf_vsdb)
> + fail("Duplicate HDMI Forum VSDB/SCDB\n");
> + if (x[2] || x[3])
> + printf(" Non-zero SCDB reserved fields!\n");
> + cta_hf_scdb(x + 4, length - 3);
> + have_hf_scdb = true;
> break;
> + default:
> + warn("Unknown %s\n", data_block.c_str());
> + hex_block(" ", x + 1 + extended + (ouinum ? 3 : 0), length - (extended + (ouinum ? 3 : 0)));
> }
> - }
> - first_block = 0;
> - last_block_was_hdmi_vsdb = 0;
> + cta_block_number++;
> + previous_cta_tag = tag;
> }
>
> void edid_state::preparse_cta_block(const unsigned char *x)
> Re: [PATCH 4/5] edid-decode: CTA extension block cleanup
Hi Joe,
I marked this patch as 'Obsoleted' since I applied a new patch that is inspired by this one.
I never liked that this patch combined tag/extended tag/oui in one switch, but I did like that there was only one default case for the hex dumps and that it removed some duplicate code.
In any case, thank you for this patch, even though I didn't merge it.
Regards,
Hans
Quoted 428 lines · Joe van Tunen
I did some evil things with the switch statement but I think it at least looks nice (for some definitions of nice).
The main idea is to be more like DisplayID. First, there's a switch to get the
data_blockname. Thedata_blockname is required for error handling so it is obtained first. Instead of a nested switch, it combines the tag and extended tag bytes. The switch obtains an oui for vendor specific data blocks. There's three tags that parse oui (I added oui parsing for audio but none of those are decoded) and now they all use the same oui function.Second, there's a separate switch for the decode part. This switch combines tag, extended tag, and oui. The duplicate code was unduplicated. There's only one default for outputting hex of unparsed data blocks (instead of 12) - whether they have a normal tag, extended tag, a tag with an oui, or an extended tag with an oui.
On 2019-12-05, 1:38 AM, "Hans Verkuil" <[email protected]> wrote:
Hi Joe, I've committed the other patches, but I'm not sure about this one. I'll look at it again when I have more time. I might make my own implementation based on ideas of this patch. BTW, I made a real mess with the back/front porch timings. Thanks for fixing that! Regards, Hans On 12/5/19 8:34 AM, joevt wrote: > Reduced tag parsing code. > Added OUI min block length checks. > > Signed-off-by: Joe van Tunen <[email protected]> > --- > edid-decode.h | 1 + > parse-cta-block.cpp | 336 ++++++++++++++++++-------------------------- > 2 files changed, 138 insertions(+), 199 deletions(-) > > diff --git a/edid-decode.h b/edid-decode.h > index 83ded83..758bdcf 100644 > --- a/edid-decode.h > +++ b/edid-decode.h > @@ -111,6 +111,7 @@ struct edid_state { > void cta_y420cmdb(const unsigned char *x, unsigned length); > void cta_vfpdb(const unsigned char *x, unsigned length); > void cta_hdmi_block(const unsigned char *x, unsigned length); > + void cta_oui(const char *block_name, const unsigned char *x, unsigned length, unsigned *ouinum); > void cta_block(const unsigned char *x); > void preparse_cta_block(const unsigned char *x); > void parse_cta_block(const unsigned char *x); > diff --git a/parse-cta-block.cpp b/parse-cta-block.cpp > index dea87c1..e52822a 100644 > --- a/parse-cta-block.cpp > +++ b/parse-cta-block.cpp > @@ -375,6 +375,11 @@ void edid_state::cta_svd(const unsigned char *x, unsigned n, int for_ycbcr420) > > if (vic == 1 && !for_ycbcr420) > has_cta861_vic_1 = 1; > + > + // vics and has_vic are basically the same (if has_vic was not bool), except vics > + // is built after preparse (during parse) which allows errors for duplicates to be > + // output in parse order. has_vic is built during preparse and is used when vics > + // from other blocks need to be checked. > if (++vics[vic][for_ycbcr420] == 2) > fail("Duplicate %sVIC %u\n", for_ycbcr420 ? "YCbCr 4:2:0 " : "", vic); > if (for_ycbcr420 && has_vic[0][vic]) > @@ -485,7 +490,6 @@ void edid_state::cta_hdmi_block(const unsigned char *x, unsigned length) > { > unsigned len_vic, len_3d; > > - printf(" (HDMI)\n"); > printf(" Source physical address %u.%u.%u.%u\n", x[3] >> 4, x[3] & 0x0f, > x[4] >> 4, x[4] & 0x0f); > > @@ -1228,10 +1232,20 @@ static void cta_hdmi_audio_block(const unsigned char *x, unsigned length) > x += 4; > } > } > +const unsigned kOUI_Unknown = 1<<12; > +const unsigned kOUI_HDMI = 2<<12; > +const unsigned kOUI_HDMIForum = 3<<12; > +const unsigned kOUI_HDR10 = 4<<12; > > -static const char *oui_name(unsigned oui) > +static const char *oui_name(unsigned oui, unsigned *ouinum = NULL) > { > + unsigned ouinumscratch; > + if (!ouinum) ouinum = &ouinumscratch; > + *ouinum = kOUI_Unknown; > switch (oui) { > + case 0x000c03: *ouinum = kOUI_HDMI ; return "HDMI"; > + case 0xc45dd8: *ouinum = kOUI_HDMIForum ; return "HDMI Forum"; > + case 0x90848b: *ouinum = kOUI_HDR10 ; return "HDR10+"; > case 0x00001a: return "AMD"; > case 0x00044b: return "NVIDIA"; > case 0x000c6e: return "ASUS"; > @@ -1244,212 +1258,136 @@ static const char *oui_name(unsigned oui) > } > } > > +void edid_state::cta_oui(const char *block_name, const unsigned char *x, unsigned length, unsigned *ouinum) > +{ > + char buf[10]; > + unsigned oui; > + > + if (length < 3) { > + oui = 0xffffffff; > + sprintf(buf, "?"); > + } else { > + oui = (x[2] << 16) + (x[1] << 8) + x[0]; > + sprintf(buf, "0x%06x", oui); > + } > + > + const char *ouiname = oui_name(oui, ouinum); > + std::string name = std::string(block_name) + ", OUI " + buf; > + if (ouiname) name += std::string(" (") + ouiname + ")"; > + data_block = name; > + > + if (oui == 0xffffffff) > + fail("CTA data block is not long enough to contain an OUI\n"); > +} > + > +#define data_block_o(n) cta_oui(n, x + 1 + extended, length - extended, &ouinum) > + > void edid_state::cta_block(const unsigned char *x) > { > - static int last_block_was_hdmi_vsdb; > - static int have_hf_vsdb, have_hf_scdb; > - static int first_block = 1; > + static unsigned previous_cta_tag = 0; > + static bool have_hf_vsdb = false; > + static bool have_hf_scdb = false; > + static unsigned cta_block_number = 0; > + > unsigned length = x[0] & 0x1f; > - const char *name; > - unsigned oui; > + unsigned ouinum = 0; > + unsigned tag=(x[0] & 0xe0) >> 5; > + unsigned extended = tag == 0x07 ? 1 : 0; > + if (extended) tag = 0x700 + x[1]; > + > + switch (tag) { > + case 0x001: data_block = "Audio Data Block"; break; > + case 0x002: data_block = "Video Data Block"; break; > + case 0x003: data_block_o("Vendor-Specific Data Block"); break; > + case 0x004: data_block = "Speaker Allocation Data Block"; break; > + case 0x005: data_block = "VESA DTC Data Block"; break; // not implemented > + > + case 0x700: data_block = "Video Capability Data Block"; break; > + case 0x701: data_block_o("Vendor-Specific Video Data Block"); break; > + case 0x702: data_block = "VESA Video Display Device Data Block"; break; // not implemented > + case 0x703: data_block = "VESA Video Timing Block Extension"; break; // not implemented > + case 0x704: data_block = "Reserved for HDMI Video Data Block"; break; // reserved > + case 0x705: data_block = "Colorimetry Data Block"; break; > + case 0x706: data_block = "HDR Static Metadata Data Block"; break; > + case 0x707: data_block = "HDR Dynamic Metadata Data Block"; break; > + > + case 0x70d: data_block = "Video Format Preference Data Block"; break; > + case 0x70e: data_block = "YCbCr 4:2:0 Video Data Block"; break; > + case 0x70f: data_block = "YCbCr 4:2:0 Capability Map Data Block"; break; > + case 0x710: data_block = "Reserved for CTA Miscellaneous Audio Fields"; break; // reserved > + case 0x711: data_block_o("Vendor-Specific Audio Data Block"); break; // no vendors implemented > + case 0x712: data_block = "HDMI Audio Data Block"; break; > + case 0x713: data_block = "Room Configuration Data Block"; break; > + case 0x714: data_block = "Speaker Location Data Block"; break; > + > + case 0x720: data_block = "InfoFrame Data Block"; break; > + > + case 0x778: data_block = "HDMI Forum EDID Extension Override Data Block"; break; > + case 0x779: data_block = "HDMI Forum Sink Capability Data Block"; break; > + default: > + if (tag < 0x700) data_block = "Unknown CTA Data Block"; > + else if (tag < 0x70d) data_block = "Unknown CTA Video-Related Data Block"; > + else if (tag < 0x720) data_block = "Unknown CTA Audio-Related Data Block"; > + else if (tag < 0x778) data_block = "Unknown CTA Data Block"; > + else if (tag < 0x780) data_block = "Unknown CTA HDMI-Related Data Block"; > + else data_block = "Unknown CTA Data Block"; > + data_block += std::string(" (") + (extended ? "extended " : "") + "tag " + utohex(tag & 0xff) + ")"; > + } > > - switch ((x[0] & 0xe0) >> 5) { > - case 0x01: > - data_block = "Audio Data Block"; > - printf(" %s\n", data_block.c_str()); > - cta_audio_block(x + 1, length); > + printf(" %s\n", data_block.c_str()); > + > + tag |= ouinum; > + switch (tag) { > + case 0x001: cta_audio_block(x + 1, length); break; > + case 0x002: cta_svd(x + 1, length, 0); break; > + case 0x003|kOUI_HDMI: > + cta_hdmi_block(x + 1, length); > + if (edid_minor != 3) > + fail("The HDMI Specification uses EDID 1.3, not 1.%u\n", edid_minor); > break; > - case 0x02: > - data_block = "Video Data Block"; > - printf(" %s\n", data_block.c_str()); > - cta_svd(x + 1, length, 0); > + case 0x003|kOUI_HDMIForum: > + if (previous_cta_tag != (0x003|kOUI_HDMI)) > + fail("HDMI Forum VSDB did not immediately follow the HDMI VSDB\n"); > + if (have_hf_scdb || have_hf_vsdb) > + fail("Duplicate HDMI Forum VSDB/SCDB\n"); > + cta_hf_scdb(x + 4, length - 3); > + have_hf_vsdb = true; > break; > - case 0x03: > - oui = (x[3] << 16) + (x[2] << 8) + x[1]; > - printf(" Vendor-Specific Data Block, OUI 0x%06x", oui); > - name = oui_name(oui); > - if (oui == 0x000c03) { > - data_block = "Vendor-Specific Data Block (HDMI)"; > - cta_hdmi_block(x + 1, length); > - last_block_was_hdmi_vsdb = 1; > - first_block = 0; > - if (edid_minor != 3) > - fail("The HDMI Specification uses EDID 1.3, not 1.%u\n", edid_minor); > - return; > - } > - if (oui == 0xc45dd8) { > - data_block = "Vendor-Specific Data Block (HDMI Forum)"; > - if (!last_block_was_hdmi_vsdb) > - fail("HDMI Forum VSDB did not immediately follow the HDMI VSDB\n"); > - if (have_hf_scdb || have_hf_vsdb) > - fail("Duplicate HDMI Forum VSDB/SCDB\n"); > - printf(" (HDMI Forum)\n"); > - cta_hf_scdb(x + 4, length - 3); > - have_hf_vsdb = 1; > - } else if (name) { > - data_block = std::string("Vendor-Specific Data Block (") + name + ")"; > - printf(" (%s)\n", name); > - hex_block(" ", x + 4, length - 3); > - } else { > - printf("\n"); > - hex_block(" ", x + 4, length - 3); > - data_block.clear(); > - warn("Unknown Vendor-Specific Data Block, OUI 0x%06x\n", oui); > - } > - break; > - case 0x04: > - data_block = "Speaker Allocation Data Block"; > - printf(" %s\n", data_block.c_str()); > - cta_sadb(x + 1, length); > - break; > - case 0x05: > - printf(" VESA DTC Data Block\n"); > - hex_block(" ", x + 1, length); > - break; > - case 0x07: > - printf(" Extended tag: "); > - switch (x[1]) { > - case 0x00: > - data_block = "Video Capability Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_vcdb(x + 2, length - 1); > - break; > - case 0x01: > - oui = (x[4] << 16) + (x[3] << 8) + x[2]; > - printf("Vendor-Specific Video Data Block, OUI 0x%06x", oui); > - name = oui_name(oui); > - if (oui == 0x90848b) { > - data_block = "Vendor-Specific Video Data Block (HDR10+)"; > - printf(" (HDR10+)\n"); > - cta_hdr10plus(x + 5, length - 4); > - } else if (name) { > - data_block = std::string("Vendor-Specific Data Block (") + name + ")"; > - printf(" (%s)\n", name); > - hex_block(" ", x + 5, length - 4); > - } else { > - printf("\n"); > - hex_block(" ", x + 5, length - 4); > - data_block.clear(); > - warn("Unknown Extended Vendor-Specific Data Block, OUI 0x%06x\n", oui); > - } > - break; > - case 0x02: > - printf("VESA Video Display Device Data Block\n"); > - hex_block(" ", x + 2, length - 1); > - break; > - case 0x03: > - printf("VESA Video Timing Block Extension\n"); > - hex_block(" ", x + 2, length - 1); > - break; > - case 0x04: > - printf("Reserved for HDMI Video Data Block\n"); > - hex_block(" ", x + 2, length - 1); > - break; > - case 0x05: > - data_block = "Colorimetry Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_colorimetry_block(x + 2, length - 1); > - break; > - case 0x06: > - data_block = "HDR Static Metadata Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_hdr_static_metadata_block(x + 2, length - 1); > - break; > - case 0x07: > - data_block = "HDR Dynamic Metadata Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_hdr_dyn_metadata_block(x + 2, length - 1); > - break; > - case 0x0d: > - data_block = "Video Format Preference Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_vfpdb(x + 2, length - 1); > - break; > - case 0x0e: > - data_block = "YCbCr 4:2:0 Video Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_svd(x + 2, length - 1, 1); > - break; > - case 0x0f: > - data_block = "YCbCr 4:2:0 Capability Map Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_y420cmdb(x + 2, length - 1); > - break; > - case 0x10: > - printf("Reserved for CTA Miscellaneous Audio Fields\n"); > - hex_block(" ", x + 2, length - 1); > - break; > - case 0x11: > - printf("Vendor-Specific Audio Data Block\n"); > - hex_block(" ", x + 2, length - 1); > - break; > - case 0x12: > - data_block = "HDMI Audio Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_hdmi_audio_block(x + 2, length - 1); > - break; > - case 0x13: > - data_block = "Room Configuration Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_rcdb(x + 2, length - 1); > - break; > - case 0x14: > - data_block = "Speaker Location Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_sldb(x + 2, length - 1); > - break; > - case 0x20: > - printf("InfoFrame Data Block\n"); > - cta_ifdb(x + 2, length - 1); > - break; > - case 0x78: > - data_block = "HDMI Forum EDID Extension Override Data Block"; > - printf("%s\n", data_block.c_str()); > - cta_hf_eeodb(x + 2, length - 1); > - // This must be the first CTA block > - if (!first_block) > - fail("Block starts at a wrong offset\n"); > - break; > - case 0x79: > - data_block = "HDMI Forum Sink Capability Data Block"; > - printf("%s\n", data_block.c_str()); > - if (!last_block_was_hdmi_vsdb) > - fail("HDMI Forum SCDB did not immediately follow the HDMI VSDB\n"); > - if (have_hf_scdb || have_hf_vsdb) > - fail("Duplicate HDMI Forum VSDB/SCDB\n"); > - if (x[2] || x[3]) > - printf(" Non-zero SCDB reserved fields!\n"); > - cta_hf_scdb(x + 4, length - 3); > - have_hf_scdb = 1; > - break; > - default: > - if (x[1] <= 12) > - printf("Unknown CTA Video-Related"); > - else if (x[1] <= 31) > - printf("Unknown CTA Audio-Related"); > - else if (x[1] >= 120 && x[1] <= 127) > - printf("Unknown CTA HDMI-Related"); > - else > - printf("Unknown CTA"); > - printf(" Data Block (extended tag 0x%02x, length %u)\n", x[1], length - 1); > - hex_block(" ", x + 2, length - 1); > - data_block.clear(); > - warn("Unknown Extended CTA Data Block 0x%02x\n", x[1]); > - break; > - } > + case 0x004: cta_sadb(x + 1, length); break; > + case 0x700: cta_vcdb(x + 2, length - 1); break; > + case 0x701|kOUI_HDR10: cta_hdr10plus(x + 5, length - 4); break; > + case 0x705: cta_colorimetry_block(x + 2, length - 1); break; > + case 0x706: cta_hdr_static_metadata_block(x + 2, length - 1); break; > + case 0x707: cta_hdr_dyn_metadata_block(x + 2, length - 1); break; > + case 0x70d: cta_vfpdb(x + 2, length - 1); break; > + case 0x70e: cta_svd(x + 2, length - 1, 1); break; > + case 0x70f: cta_y420cmdb(x + 2, length - 1); break; > + case 0x712: cta_hdmi_audio_block(x + 2, length - 1); break; > + case 0x713: cta_rcdb(x + 2, length - 1); break; > + case 0x714: cta_sldb(x + 2, length - 1); break; > + case 0x720: cta_ifdb(x + 2, length - 1); break; > + case 0x778: > + cta_hf_eeodb(x + 2, length - 1); > + // This must be the first CTA block > + if (cta_block_number != 0) > + fail("Block starts at a wrong offset\n"); > break; > - default: { > - unsigned tag = (*x & 0xe0) >> 5; > - unsigned length = *x & 0x1f; > - printf(" Unknown CTA tag 0x%02x, length %u\n", tag, length); > - hex_block(" ", x + 1, length); > - data_block.clear(); > - warn("Unknown CTA Data Block %u\n", tag); > + case 0x779: > + if (previous_cta_tag != (0x003|kOUI_HDMI)) > + fail("HDMI Forum SCDB did not immediately follow the HDMI VSDB\n"); > + if (have_hf_scdb || have_hf_vsdb) > + fail("Duplicate HDMI Forum VSDB/SCDB\n"); > + if (x[2] || x[3]) > + printf(" Non-zero SCDB reserved fields!\n"); > + cta_hf_scdb(x + 4, length - 3); > + have_hf_scdb = true; > break; > + default: > + warn("Unknown %s\n", data_block.c_str()); > + hex_block(" ", x + 1 + extended + (ouinum ? 3 : 0), length - (extended + (ouinum ? 3 : 0))); > } > - } > - first_block = 0; > - last_block_was_hdmi_vsdb = 0; > + cta_block_number++; > + previous_cta_tag = tag; > } > > void edid_state::preparse_cta_block(const unsigned char *x) >
PATCH 5/5 edid-decode: add missing space
In reply to joevtSpace character was missing from error message.
--- parse-cta-block.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
parse-cta-block.cpp +1 -1
@@ -1480,7 +1480,7 @@ void edid_state::parse_cta_block(const unsigned char *x) fail("Both the serial number and the serial string are set\n"); if (!has_cta861_vic_1 && !has_640x480p60_est_timing) fail("Required 640x480p60 timings are missing in the established timings" - "and the SVD list (VIC 1)\n"); + " and the SVD list (VIC 1)\n"); if ((supported_hdmi_vic_vsb_codes & supported_hdmi_vic_codes) != supported_hdmi_vic_codes) fail("HDMI VIC Codes must have their CTA-861 VIC equivalents in the VSB\n");
Signature · 1 line
2.21.0 (Apple Git-122.2)