travis.yml: Run 32-bit tests with KVM, too
PATCH 1/1 travis.yml: Run 32-bit tests with KVM, too
KVM works on Travis in 32-bit, too, so we can enable more tests there.
--- .travis.yml | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
.travis.yml +7 -3
@@ -34,15 +34,19 @@ matrix: env: - CONFIG="--arch=i386" - BUILD_DIR="." - - TESTS="eventinj port80 sieve tsc taskswitch umip vmexit_ple_round_robin" + - TESTS="asyncpf hyperv_stimer hyperv_synic kvmclock_test msr pmu realmode + s3 sieve smap smptest smptest3 taskswitch taskswitch2 tsc_adjust" + - ACCEL="kvm" - addons: apt_packages: gcc gcc-multilib qemu-system-x86 env: - CONFIG="--arch=i386" - BUILD_DIR="i386-builddir" - - TESTS="vmexit_mov_from_cr8 vmexit_ipi vmexit_ipi_halt vmexit_mov_to_cr8 - vmexit_cpuid vmexit_tscdeadline vmexit_tscdeadline_immed" + - TESTS="tsx-ctrl umip vmexit_cpuid vmexit_ipi vmexit_ipi_halt + vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ple_round_robin + vmexit_tscdeadline vmexit_tscdeadline_immed vmexit_vmcall" + - ACCEL="kvm" - addons: apt_packages: gcc-arm-linux-gnueabihf qemu-system-arm
Signature · 1 line
2.18.1
Paolo Bonzini
maintainerQuoted 25 lines · Thomas Huth
KVM works on Travis in 32-bit, too, so we can enable more tests there.
Signed-off-by Thomas Huth <[email protected]>--- .travis.yml | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-).travis.yml +3
-1@@ -34,15 +34,19 @@ matrix: env: - CONFIG="--arch=i386" - BUILD_DIR="." - - TESTS="eventinj port80 sieve tsc taskswitch umip vmexit_ple_round_robin" + - TESTS="asyncpf hyperv_stimer hyperv_synic kvmclock_test msr pmu realmode + s3 sieve smap smptest smptest3 taskswitch taskswitch2 tsc_adjust" + - ACCEL="kvm" - addons: apt_packages: gcc gcc-multilib qemu-system-x86 env: - CONFIG="--arch=i386"
.travis.yml matrix: · line 52
Quoted 10 lines
.travis.yml +4
-2- BUILD_DIR="i386-builddir" - - TESTS="vmexit_mov_from_cr8 vmexit_ipi vmexit_ipi_halt vmexit_mov_to_cr8 - vmexit_cpuid vmexit_tscdeadline vmexit_tscdeadline_immed" + - TESTS="tsx-ctrl umip vmexit_cpuid vmexit_ipi vmexit_ipi_halt + vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ple_round_robin + vmexit_tscdeadline vmexit_tscdeadline_immed vmexit_vmcall" + - ACCEL="kvm" - addons: apt_packages: gcc-arm-linux-gnueabihf qemu-system-arm
Applied, thanks. But there are also some 32-bit specific tests (taskswitch, taskswitch2, cmpxchg8b) that we may want to add.
Paolo
Quoted 8 lines · Paolo Bonzini
Quoted 7 lines · Thomas Huth
KVM works on Travis in 32-bit, too, so we can enable more tests there.
Signed-off-by Thomas Huth <[email protected]>--- .travis.yml | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
Quoted 11 lines
.travis.yml matrix: · line 38
Quoted 11 lines
.travis.yml +2
-1@@ -34,15 +34,19 @@ matrix: env: - CONFIG="--arch=i386" - BUILD_DIR="." - - TESTS="eventinj port80 sieve tsc taskswitch umip vmexit_ple_round_robin" + - TESTS="asyncpf hyperv_stimer hyperv_synic kvmclock_test msr pmu realmode + s3 sieve smap smptest smptest3 taskswitch taskswitch2 tsc_adjust"
taskswitch and taskswitch2 are here ----------------^
Quoted 14 lines
Quoted 14 lines
.travis.yml +5
-2+ - ACCEL="kvm" - addons: apt_packages: gcc gcc-multilib qemu-system-x86 env: - CONFIG="--arch=i386" - BUILD_DIR="i386-builddir" - - TESTS="vmexit_mov_from_cr8 vmexit_ipi vmexit_ipi_halt vmexit_mov_to_cr8 - vmexit_cpuid vmexit_tscdeadline vmexit_tscdeadline_immed" + - TESTS="tsx-ctrl umip vmexit_cpuid vmexit_ipi vmexit_ipi_halt + vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ple_round_robin + vmexit_tscdeadline vmexit_tscdeadline_immed vmexit_vmcall" + - ACCEL="kvm"
Quoted 6 lines
.travis.yml matrix: · line 52
Quoted 3 lines
.travis.yml +0
-0- addons: apt_packages: gcc-arm-linux-gnueabihf qemu-system-armApplied, thanks. But there are also some 32-bit specific tests (taskswitch, taskswitch2, cmpxchg8b) that we may want to add.
cmpxchg8b seems to be missing in x86/unittests.cfg ... so I think it should be added there first?
Thomas
Paolo Bonzini
maintainerQuoted 9 lines · Thomas Huth
Quoted 8 lines · Paolo Bonzini
Quoted 7 lines · Thomas Huth
KVM works on Travis in 32-bit, too, so we can enable more tests there.
Signed-off-by Thomas Huth <[email protected]>--- .travis.yml | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
Quoted 13 lines
Quoted 11 lines
.travis.yml matrix: · line 38
Quoted 11 lines
.travis.yml +2
-1@@ -34,15 +34,19 @@ matrix: env: - CONFIG="--arch=i386" - BUILD_DIR="." - - TESTS="eventinj port80 sieve tsc taskswitch umip vmexit_ple_round_robin" + - TESTS="asyncpf hyperv_stimer hyperv_synic kvmclock_test msr pmu realmode + s3 sieve smap smptest smptest3 taskswitch taskswitch2 tsc_adjust"taskswitch and taskswitch2 are here ----------------^
You're right, but I'm confused: what are the two separate configurations for? Worth a comment?
Quoted 18 lines
Quoted 18 lines
Quoted 17 lines
.travis.yml +5
-2+ - ACCEL="kvm" - addons: apt_packages: gcc gcc-multilib qemu-system-x86 env: - CONFIG="--arch=i386" - BUILD_DIR="i386-builddir" - - TESTS="vmexit_mov_from_cr8 vmexit_ipi vmexit_ipi_halt vmexit_mov_to_cr8 - vmexit_cpuid vmexit_tscdeadline vmexit_tscdeadline_immed" + - TESTS="tsx-ctrl umip vmexit_cpuid vmexit_ipi vmexit_ipi_halt + vmexit_mov_from_cr8 vmexit_mov_to_cr8 vmexit_ple_round_robin + vmexit_tscdeadline vmexit_tscdeadline_immed vmexit_vmcall" + - ACCEL="kvm" - addons: apt_packages: gcc-arm-linux-gnueabihf qemu-system-arm
Quoted 5 lines
Quoted 2 lines
Applied, thanks. But there are also some 32-bit specific tests (taskswitch, taskswitch2, cmpxchg8b) that we may want to add.
cmpxchg8b seems to be missing in x86/unittests.cfg ... so I think it should be added there first?
Good idea.
Quoted 24 lines · Paolo Bonzini
Quoted 9 lines · Thomas Huth
Quoted 8 lines · Paolo Bonzini
Quoted 7 lines · Thomas Huth
KVM works on Travis in 32-bit, too, so we can enable more tests there.
Signed-off-by Thomas Huth <[email protected]>--- .travis.yml | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)Quoted 13 lines
Quoted 11 lines
.travis.yml matrix: · line 38
Quoted 11 lines
.travis.yml +2
-1@@ -34,15 +34,19 @@ matrix: env: - CONFIG="--arch=i386" - BUILD_DIR="." - - TESTS="eventinj port80 sieve tsc taskswitch umip vmexit_ple_round_robin" + - TESTS="asyncpf hyperv_stimer hyperv_synic kvmclock_test msr pmu realmode + s3 sieve smap smptest smptest3 taskswitch taskswitch2 tsc_adjust"taskswitch and taskswitch2 are here ----------------^
Quoted 2 lines
You're right, but I'm confused: what are the two separate configurations for? Worth a comment?
For all architectures we've got one entry for in-tree builds and one in-tree entry for out-of-tree builds. Since we've got these two entries anyway, I simply split up the set of tests to speed up the CI process a little bit.
Thomas