Skip to contentSkip to conversation

iio: adc: ti-ads1025: Get rid of legacy platform data

PATCH Applied Andy Shevchenko 2 participants 5 messages Dec 5, 2019 – Dec 9, 2019 IIO

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/2 iio: adc: ti-ads1025: Get rid of legacy platform data

Platform data is a legacy interface to supply device properties to the driver. In this case we even don't have in-kernel users for it. Just remove it for good.

---
v2: no changes

 drivers/iio/adc/ti-ads1015.c          | 18 ++++++++----------
 include/Kbuild                        |  1 -
 include/linux/platform_data/ads1015.h | 23 -----------------------
 3 files changed, 8 insertions(+), 34 deletions(-)
 delete mode 100644 include/linux/platform_data/ads1015.h
drivers/iio/adc/ti-ads1015.c +8 -10
index a550b132cfb7..3b123b4f0b99 100644
@@ -21,8 +21,6 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 
-#include <linux/platform_data/ads1015.h>
-
 #include <linux/iio/iio.h>
 #include <linux/iio/types.h>
 #include <linux/iio/sysfs.h>
@@ -33,6 +31,8 @@
 
 #define ADS1015_DRV_NAME "ads1015"
 
+#define ADS1015_CHANNELS 8
+
 #define ADS1015_CONV_REG	0x00
 #define ADS1015_CFG_REG		0x01
 #define ADS1015_LO_THRESH_REG	0x02
@@ -219,6 +219,12 @@ static const struct iio_event_spec ads1015_events[] = {
 	.datasheet_name = "AIN"#_chan"-AIN"#_chan2,		\
 }
 
+struct ads1015_channel_data {
+	bool enabled;
+	unsigned int pga;
+	unsigned int data_rate;
+};
+
 struct ads1015_thresh_data {
 	unsigned int comp_queue;
 	int high_thresh;
@@ -903,14 +909,6 @@ static void ads1015_get_channels_config(struct i2c_client *client)
 
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ads1015_data *data = iio_priv(indio_dev);
-	struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
-
-	/* prefer platform data */
-	if (pdata) {
-		memcpy(data->channel_data, pdata->channel_data,
-		       sizeof(data->channel_data));
-		return;
-	}
 
 #ifdef CONFIG_OF
 	if (!ads1015_get_channels_config_of(client))
include/Kbuild +0 -1
index ffba79483cc5..498821e5d9ed 100644
@@ -443,7 +443,6 @@ header-test-			+= linux/platform_data/ad7793.h
 header-test-			+= linux/platform_data/ad7887.h
 header-test-			+= linux/platform_data/adau17x1.h
 header-test-			+= linux/platform_data/adp8870.h
-header-test-			+= linux/platform_data/ads1015.h
 header-test-			+= linux/platform_data/ads7828.h
 header-test-			+= linux/platform_data/apds990x.h
 header-test-			+= linux/platform_data/arm-ux500-pm.h
include/linux/platform_data/ads1015.h deleted +0 -23
deleted file mode 100644
index 4cc9ffcafcbf..000000000000
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Platform Data for ADS1015 12-bit 4-input ADC
- * (C) Copyright 2010
- * Dirk Eibach, Guntermann & Drunck GmbH <[email protected]>
- */
-
-#ifndef LINUX_ADS1015_H
-#define LINUX_ADS1015_H
-
-#define ADS1015_CHANNELS 8
-
-struct ads1015_channel_data {
-	bool enabled;
-	unsigned int pga;
-	unsigned int data_rate;
-};
-
-struct ads1015_platform_data {
-	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
-};
-
-#endif /* LINUX_ADS1015_H */
Signature · 1 line
2.24.0
#1 lore raw

PATCH v3 2/2 iio: adc: ti-ads1015: Make use of device property API

Make use of device property API in this driver so that both OF based system and ACPI based system can use this driver.

---
v2:
- use device_for_each_child_node()
- leave 'node' variable name (reduce churn)

 drivers/iio/adc/ti-ads1015.c | 57 ++++++++++++++++--------------------
 1 file changed, 26 insertions(+), 31 deletions(-)
drivers/iio/adc/ti-ads1015.c +26 -31
index 3b123b4f0b99..5ea4f45d6bad 100644
@@ -12,10 +12,10 @@
  */
 
 #include <linux/module.h>
-#include <linux/of_device.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
@@ -77,6 +77,7 @@
 #define ADS1015_DEFAULT_CHAN		0
 
 enum chip_ids {
+	ADSXXXX = 0,
 	ADS1015,
 	ADS1115,
 };
@@ -843,65 +844,58 @@ static const struct iio_info ads1115_info = {
 	.attrs          = &ads1115_attribute_group,
 };
 
-#ifdef CONFIG_OF
-static int ads1015_get_channels_config_of(struct i2c_client *client)
+static int ads1015_client_get_channels_config(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ads1015_data *data = iio_priv(indio_dev);
-	struct device_node *node;
+	struct device *dev = &client->dev;
+	struct fwnode_handle *node;
+	int i = -1;
 
-	if (!client->dev.of_node ||
-	    !of_get_next_child(client->dev.of_node, NULL))
-		return -EINVAL;
-
-	for_each_child_of_node(client->dev.of_node, node) {
+	device_for_each_child_node(dev, node) {
 		u32 pval;
 		unsigned int channel;
 		unsigned int pga = ADS1015_DEFAULT_PGA;
 		unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
 
-		if (of_property_read_u32(node, "reg", &pval)) {
-			dev_err(&client->dev, "invalid reg on %pOF\n",
-				node);
+		if (fwnode_property_read_u32(node, "reg", &pval)) {
+			dev_err(dev, "invalid reg on %pfw\n", node);
 			continue;
 		}
 
 		channel = pval;
 		if (channel >= ADS1015_CHANNELS) {
-			dev_err(&client->dev,
-				"invalid channel index %d on %pOF\n",
+			dev_err(dev, "invalid channel index %d on %pfw\n",
 				channel, node);
 			continue;
 		}
 
-		if (!of_property_read_u32(node, "ti,gain", &pval)) {
+		if (!fwnode_property_read_u32(node, "ti,gain", &pval)) {
 			pga = pval;
 			if (pga > 6) {
-				dev_err(&client->dev, "invalid gain on %pOF\n",
-					node);
-				of_node_put(node);
+				dev_err(dev, "invalid gain on %pfw\n", node);
+				fwnode_handle_put(node);
 				return -EINVAL;
 			}
 		}
 
-		if (!of_property_read_u32(node, "ti,datarate", &pval)) {
+		if (!fwnode_property_read_u32(node, "ti,datarate", &pval)) {
 			data_rate = pval;
 			if (data_rate > 7) {
-				dev_err(&client->dev,
-					"invalid data_rate on %pOF\n",
-					node);
-				of_node_put(node);
+				dev_err(dev, "invalid data_rate on %pfw\n", node);
+				fwnode_handle_put(node);
 				return -EINVAL;
 			}
 		}
 
 		data->channel_data[channel].pga = pga;
 		data->channel_data[channel].data_rate = data_rate;
+
+		i++;
 	}
 
-	return 0;
+	return i < 0 ? -EINVAL : 0;
 }
-#endif
 
 static void ads1015_get_channels_config(struct i2c_client *client)
 {
@@ -910,10 +904,9 @@ static void ads1015_get_channels_config(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ads1015_data *data = iio_priv(indio_dev);
 
-#ifdef CONFIG_OF
-	if (!ads1015_get_channels_config_of(client))
+	if (!ads1015_client_get_channels_config(client))
 		return;
-#endif
+
 	/* fallback on default configuration */
 	for (k = 0; k < ADS1015_CHANNELS; ++k) {
 		data->channel_data[k].pga = ADS1015_DEFAULT_PGA;
@@ -951,9 +944,8 @@ static int ads1015_probe(struct i2c_client *client,
 	indio_dev->name = ADS1015_DRV_NAME;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	if (client->dev.of_node)
-		chip = (enum chip_ids)of_device_get_match_data(&client->dev);
-	else
+	chip = (enum chip_ids)device_get_match_data(&client->dev);
+	if (chip == ADSXXXX)
 		chip = id->driver_data;
 	switch (chip) {
 	case ADS1015:
@@ -968,6 +960,9 @@ static int ads1015_probe(struct i2c_client *client,
 		indio_dev->info = &ads1115_info;
 		data->data_rate = (unsigned int *) &ads1115_data_rate;
 		break;
+	default:
+		dev_err(&client->dev, "Unknown chip %d\n", chip);
+		return -EINVAL;
 	}
 
 	data->event_channel = ADS1015_CHANNELS;
Signature · 1 line
2.24.0
maintainer Applied
#2 lore raw

Re: [PATCH v3 2/2] iio: adc: ti-ads1015: Make use of device property API

Quoted 4 lines · On Thu, 5 Dec 2019 19:46:37 +0200 Andy Shevchenko…

Make use of device property API in this driver so that both OF based system and ACPI based system can use this driver.

Applied.

Thanks,

Jonathan

Quoted 149 lines

---
v2:
- use device_for_each_child_node()
- leave 'node' variable name (reduce churn)

 drivers/iio/adc/ti-ads1015.c | 57 ++++++++++++++++--------------------
 1 file changed, 26 insertions(+), 31 deletions(-)
drivers/iio/adc/ti-ads1015.c +26 -31
index 3b123b4f0b99..5ea4f45d6bad 100644
@@ -12,10 +12,10 @@
  */
 
 #include <linux/module.h>
-#include <linux/of_device.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
@@ -77,6 +77,7 @@
 #define ADS1015_DEFAULT_CHAN		0
 
 enum chip_ids {
+	ADSXXXX = 0,
 	ADS1015,
 	ADS1115,
 };
@@ -843,65 +844,58 @@ static const struct iio_info ads1115_info = {
 	.attrs          = &ads1115_attribute_group,
 };
 
-#ifdef CONFIG_OF
-static int ads1015_get_channels_config_of(struct i2c_client *client)
+static int ads1015_client_get_channels_config(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ads1015_data *data = iio_priv(indio_dev);
-	struct device_node *node;
+	struct device *dev = &client->dev;
+	struct fwnode_handle *node;
+	int i = -1;
 
-	if (!client->dev.of_node ||
-	    !of_get_next_child(client->dev.of_node, NULL))
-		return -EINVAL;
-
-	for_each_child_of_node(client->dev.of_node, node) {
+	device_for_each_child_node(dev, node) {
 		u32 pval;
 		unsigned int channel;
 		unsigned int pga = ADS1015_DEFAULT_PGA;
 		unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
 
-		if (of_property_read_u32(node, "reg", &pval)) {
-			dev_err(&client->dev, "invalid reg on %pOF\n",
-				node);
+		if (fwnode_property_read_u32(node, "reg", &pval)) {
+			dev_err(dev, "invalid reg on %pfw\n", node);
 			continue;
 		}
 
 		channel = pval;
 		if (channel >= ADS1015_CHANNELS) {
-			dev_err(&client->dev,
-				"invalid channel index %d on %pOF\n",
+			dev_err(dev, "invalid channel index %d on %pfw\n",
 				channel, node);
 			continue;
 		}
 
-		if (!of_property_read_u32(node, "ti,gain", &pval)) {
+		if (!fwnode_property_read_u32(node, "ti,gain", &pval)) {
 			pga = pval;
 			if (pga > 6) {
-				dev_err(&client->dev, "invalid gain on %pOF\n",
-					node);
-				of_node_put(node);
+				dev_err(dev, "invalid gain on %pfw\n", node);
+				fwnode_handle_put(node);
 				return -EINVAL;
 			}
 		}
 
-		if (!of_property_read_u32(node, "ti,datarate", &pval)) {
+		if (!fwnode_property_read_u32(node, "ti,datarate", &pval)) {
 			data_rate = pval;
 			if (data_rate > 7) {
-				dev_err(&client->dev,
-					"invalid data_rate on %pOF\n",
-					node);
-				of_node_put(node);
+				dev_err(dev, "invalid data_rate on %pfw\n", node);
+				fwnode_handle_put(node);
 				return -EINVAL;
 			}
 		}
 
 		data->channel_data[channel].pga = pga;
 		data->channel_data[channel].data_rate = data_rate;
+
+		i++;
 	}
 
-	return 0;
+	return i < 0 ? -EINVAL : 0;
 }
-#endif
 
 static void ads1015_get_channels_config(struct i2c_client *client)
 {
@@ -910,10 +904,9 @@ static void ads1015_get_channels_config(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ads1015_data *data = iio_priv(indio_dev);
 
-#ifdef CONFIG_OF
-	if (!ads1015_get_channels_config_of(client))
+	if (!ads1015_client_get_channels_config(client))
 		return;
-#endif
+
 	/* fallback on default configuration */
 	for (k = 0; k < ADS1015_CHANNELS; ++k) {
 		data->channel_data[k].pga = ADS1015_DEFAULT_PGA;
@@ -951,9 +944,8 @@ static int ads1015_probe(struct i2c_client *client,
 	indio_dev->name = ADS1015_DRV_NAME;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	if (client->dev.of_node)
-		chip = (enum chip_ids)of_device_get_match_data(&client->dev);
-	else
+	chip = (enum chip_ids)device_get_match_data(&client->dev);
+	if (chip == ADSXXXX)
 		chip = id->driver_data;
 	switch (chip) {
 	case ADS1015:
@@ -968,6 +960,9 @@ static int ads1015_probe(struct i2c_client *client,
 		indio_dev->info = &ads1115_info;
 		data->data_rate = (unsigned int *) &ads1115_data_rate;
 		break;
+	default:
+		dev_err(&client->dev, "Unknown chip %d\n", chip);
+		return -EINVAL;
 	}
 
 	data->event_channel = ADS1015_CHANNELS;
#3 lore raw

Re: [PATCH v3 2/2] iio: adc: ti-ads1015: Make use of device property API

Quoted 8 lines · Jonathan Cameron
Quoted 4 lines · On Thu, 5 Dec 2019 19:46:37 +0200 Andy Shevchenko…

Make use of device property API in this driver so that both OF based system and ACPI based system can use this driver.

Applied.

Thanks!

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer Applied
#4 lore raw
In reply to Andy Shevchenko
Quoted 5 lines · On Thu, 5 Dec 2019 19:46:36 +0200 Andy Shevchenko…

Platform data is a legacy interface to supply device properties to the driver. In this case we even don't have in-kernel users for it. Just remove it for good.

Reverted previous version. Please do reply to your own thread when you do this as sometimes I forget to check if there is a newer version.

Also, whilst reverting I noticed the part number is wrong in the patch description so fixed that up whilst applying this.

Applied.

J

Quoted 99 lines

---
v2: no changes

 drivers/iio/adc/ti-ads1015.c          | 18 ++++++++----------
 include/Kbuild                        |  1 -
 include/linux/platform_data/ads1015.h | 23 -----------------------
 3 files changed, 8 insertions(+), 34 deletions(-)
 delete mode 100644 include/linux/platform_data/ads1015.h
drivers/iio/adc/ti-ads1015.c +8 -10
index a550b132cfb7..3b123b4f0b99 100644
@@ -21,8 +21,6 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 
-#include <linux/platform_data/ads1015.h>
-
 #include <linux/iio/iio.h>
 #include <linux/iio/types.h>
 #include <linux/iio/sysfs.h>
@@ -33,6 +31,8 @@
 
 #define ADS1015_DRV_NAME "ads1015"
 
+#define ADS1015_CHANNELS 8
+
 #define ADS1015_CONV_REG	0x00
 #define ADS1015_CFG_REG		0x01
 #define ADS1015_LO_THRESH_REG	0x02
@@ -219,6 +219,12 @@ static const struct iio_event_spec ads1015_events[] = {
 	.datasheet_name = "AIN"#_chan"-AIN"#_chan2,		\
 }
 
+struct ads1015_channel_data {
+	bool enabled;
+	unsigned int pga;
+	unsigned int data_rate;
+};
+
 struct ads1015_thresh_data {
 	unsigned int comp_queue;
 	int high_thresh;
@@ -903,14 +909,6 @@ static void ads1015_get_channels_config(struct i2c_client *client)
 
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ads1015_data *data = iio_priv(indio_dev);
-	struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
-
-	/* prefer platform data */
-	if (pdata) {
-		memcpy(data->channel_data, pdata->channel_data,
-		       sizeof(data->channel_data));
-		return;
-	}
 
 #ifdef CONFIG_OF
 	if (!ads1015_get_channels_config_of(client))
include/Kbuild +0 -1
index ffba79483cc5..498821e5d9ed 100644
@@ -443,7 +443,6 @@ header-test-			+= linux/platform_data/ad7793.h
 header-test-			+= linux/platform_data/ad7887.h
 header-test-			+= linux/platform_data/adau17x1.h
 header-test-			+= linux/platform_data/adp8870.h
-header-test-			+= linux/platform_data/ads1015.h
 header-test-			+= linux/platform_data/ads7828.h
 header-test-			+= linux/platform_data/apds990x.h
 header-test-			+= linux/platform_data/arm-ux500-pm.h
include/linux/platform_data/ads1015.h deleted +0 -23
deleted file mode 100644
index 4cc9ffcafcbf..000000000000
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Platform Data for ADS1015 12-bit 4-input ADC
- * (C) Copyright 2010
- * Dirk Eibach, Guntermann & Drunck GmbH <[email protected]>
- */
-
-#ifndef LINUX_ADS1015_H
-#define LINUX_ADS1015_H
-
-#define ADS1015_CHANNELS 8
-
-struct ads1015_channel_data {
-	bool enabled;
-	unsigned int pga;
-	unsigned int data_rate;
-};
-
-struct ads1015_platform_data {
-	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
-};
-
-#endif /* LINUX_ADS1015_H */