cosmetic: Fix spelling and whitespace errors
Subsystems (5)
PATCH 1/2 cosmetic: Fix spelling and whitespace errors
--- Makefile | 2 +- README | 4 ++-- arch/arm/cpu/armv8/sec_firmware.c | 2 +- arch/arm/mach-rockchip/Kconfig | 2 +- arch/arm/mach-rockchip/bootrom.c | 4 ++-- arch/arm/mach-rockchip/rk3399/Kconfig | 6 +++--- arch/arm/mach-rockchip/spl-boot-order.c | 2 +- board/rockchip/evb_rk3399/README | 2 +- common/spl/Kconfig | 4 ++-- doc/README.SPL | 2 +- doc/README.TPL | 2 +- doc/uImage.FIT/source_file_format.txt | 2 +- tools/binman/README | 2 +- tools/binman/README.entries | 4 ++-- 14 files changed, 20 insertions(+), 20 deletions(-)
Makefile +1 -1
@@ -1663,7 +1663,7 @@ u-boot.sym: u-boot FORCE # make sure no implicit rule kicks in $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; -# Handle descending into subdirectories listed in $(vmlinux-dirs) +# Handle descending into ubdirectories listed in $(u-boot-dirs) # Preset locale variables to speed up the build process. Limit locale # tweaks to this spot to avoid wrong language settings when running # make menuconfig etc.
README +2 -2
@@ -3087,7 +3087,7 @@ Low Level (hardware related) configuration options: compiling a NAND SPL. - CONFIG_TPL_BUILD - Modifies the behaviour of start.S when compiling a loader + Modifies the behaviour of start.S when compiling a loader that is executed after the SPL and before the actual U-Boot. It is loaded by the SPL.
@@ -3306,7 +3306,7 @@ Testing of U-Boot Modifications, Ports to New Hardware, etc.: If you have modified U-Boot sources (for instance added a new board or support for new devices, a new CPU, etc.) you are expected to provide feedback to the other developers. The feedback normally takes -the form of a "patch", i. e. a context diff against a certain (latest +the form of a "patch", i.e. a context diff against a certain (latest official or latest in the git repository) version of U-Boot sources. But before you submit such a patch, please verify that your modifi-
arch/arm/cpu/armv8/sec_firmware.c +1 -1
@@ -353,7 +353,7 @@ bool sec_firmware_support_hwrng(void)return true;#endif if (sec_firmware_addr &SEC_FIRMWARE_RUNNING ) { -return true; +return true; }return false;
arch/arm/mach-rockchip/Kconfig +1 -1
@@ -265,7 +265,7 @@ config TPL_ROCKCHIP_COMMON_BOARD Rockchip SoCs have similar boot process, prefer to use TPL for DRAM init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL common board is a basic TPL board init which can be shared for most - of SoCs to avoid copy-pase for different SoCs. + of SoCs to avoid copy-paste for different SoCs. config ROCKCHIP_BOOT_MODE_REG hex "Rockchip boot mode flag register address"
arch/arm/mach-rockchip/bootrom.c +2 -2
@@ -39,8 +39,8 @@ void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd)* to check it and back to bootrom at very early bootstage(before * some basic configurations(such as interrupts) been * changed by TPL/SPL, as the bootrom download operation -* relys on many default settings(such as interrupts) by -* it's self. +* relies on many default settings(such as interrupts) by +* itself. */ static bool check_back_to_brom_dnl_flag (void ) {
arch/arm/mach-rockchip/rk3399/Kconfig +3 -3
@@ -6,9 +6,9 @@ choice config TARGET_EVB_RK3399 bool "RK3399 evaluation board" help - RK3399evb is a evaluation board for Rockchp rk3399, - with full function and phisical connectors support like type-C ports, - usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial... + RK3399evb is a evaluation board for Rockchip RK3399, + with full function and physical connectors support like Type-C ports, + USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial... config TARGET_PUMA_RK3399 bool "Theobroma Systems RK3399-Q7 (Puma)"
arch/arm/mach-rockchip/spl-boot-order.c +1 -1
@@ -35,7 +35,7 @@ static int spl_node_to_boot_device(int node)/* * This should eventually move into the SPL code, once SPL becomes * aware of the block-device layer. Until then (and to avoid unneeded -* delays in getting this feature out, it lives at the board-level). +* delays in getting this feature out), it lives at the board-level. */ if (!uclass_get_device_by_of_offset (UCLASS_MMC , node, &parent)) {struct udevice *dev;
board/rockchip/evb_rk3399/README +1 -1
@@ -9,7 +9,7 @@ RK3399 key features we might use in U-Boot: * DRAM: 4GB-128MB dual-channel * eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 * SD/MMC: support SD 3.0, MMC 4.51 -* USB: USB3.0 typc-C port *2 with dwc3 controller +* USB: USB3.0 type-C port *2 with dwc3 controller * USB2.0 EHCI host port *2 * Display: RGB/HDMI/DP/MIPI/EDP
common/spl/Kconfig +2 -2
@@ -268,7 +268,7 @@ config SPL_BANNER_PRINT default y help If this option is enabled, SPL will print the banner with version - info. Disabling this option could be useful to reduce TPL boot time + info. Disabling this option could be useful to reduce SPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config TPL_BANNER_PRINT
@@ -277,7 +277,7 @@ config TPL_BANNER_PRINT default y help If this option is enabled, SPL will not print the banner with version - info. Disabling this option could be useful to reduce SPL boot time + info. Disabling this option could be useful to reduce TPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config SPL_EARLY_BSS
doc/README.SPL +1 -1
@@ -75,7 +75,7 @@ with: - the nodes with one pre-relocation property: 'u-boot,dm-pre-reloc' or 'u-boot,dm-spl' -ftgrep is also used to remove: +fdtgrep is also used to remove: - the properties defined in CONFIG_OF_SPL_REMOVE_PROPS - all the pre-relocation properties ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')
doc/README.TPL +1 -1
@@ -31,7 +31,7 @@ make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD. The SPL options are shared by SPL and TPL, the board config file should determine which SPL options to choose based on whether CONFIG_TPL_BUILD -is set. Source files can be compiled for TPL with options choosed in the +is set. Source files can be compiled for TPL with options chosen in the board config file. TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes with
doc/uImage.FIT/source_file_format.txt +1 -1
@@ -262,7 +262,7 @@ o config-1 - loadables : Unit name containing a list of additional binaries to be loaded at their given locations. "loadables" is a comma-separated list of strings. U-Boot will load each binary at its given start-address and - may optionaly invoke additional post-processing steps on this binary based + may optionally invoke additional post-processing steps on this binary based on its component image node type. - compatible : The root compatible string of the U-Boot device tree that this configuration shall automatically match when CONFIG_FIT_BEST_MATCH is
tools/binman/README +1 -1
@@ -73,7 +73,7 @@ any dependencies between them and brought in as needed - Provides for a standard image description available in the build and at run-time -- SoC-specific image-signing tools can be accomodated +- SoC-specific image-signing tools can be accommodated - Avoids cluttering the U-Boot build system with image-building code - The image description is automatically available at run-time in U-Boot, SPL. It can be made available to other software also
tools/binman/README.entries +2 -2
@@ -519,7 +519,7 @@ Properties / Entry arguments: This file contains code used by the SoC that is required to make it work. The Management Engine is like a background task that runs things that are -not clearly documented, but may include keyboard, deplay and network +not clearly documented, but may include keyboard, display and network access. For platform that use ME it is not possible to disable it. U-Boot does not directly execute code in the ME binary.
@@ -593,7 +593,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f Properties / Entry arguments: - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') -This enrty is valid for PowerPC mpc85xx cpus. This entry holds +This entry is valid for PowerPC mpc85xx cpus. This entry holds 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
Signature · 1 line
2.23.0
PATCH 2/2 Fix typo in macros, "FIRMEWARE" -> "FIRMWARE"
--- arch/arm/cpu/armv8/Kconfig | 2 +- arch/arm/cpu/armv8/sec_firmware.c | 8 ++++---- drivers/net/pfe_eth/pfe_firmware.c | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-)
arch/arm/cpu/armv8/Kconfig +1 -1
@@ -65,7 +65,7 @@ config ARMV8_SEC_FIRMWARE_SUPPORT - Address of secure firmware. - Address to hold the return address from secure firmware. - Secure firmware FIT image related information. - Such as: SEC_FIRMWARE_FIT_IMAGE and SEC_FIRMEWARE_FIT_CNF_NAME + Such as: SEC_FIRMWARE_FIT_IMAGE and SEC_FIRMWARE_FIT_CNF_NAME - The target exception level that secure monitor firmware will return to.
arch/arm/cpu/armv8/sec_firmware.c +4 -4
@@ -28,8 +28,8 @@ phys_addr_t sec_firmware_addr;#ifndef SEC_FIRMWARE_FIT_IMAGE #define SEC_FIRMWARE_FIT_IMAGE "firmware"#endif -#ifndef SEC_FIRMEWARE_FIT_CNF_NAME -#define SEC_FIRMEWARE_FIT_CNF_NAME "config-1" +#ifndef SEC_FIRMWARE_FIT_CNF_NAME +#define SEC_FIRMWARE_FIT_CNF_NAME "config-1"#endif #ifndef SEC_FIRMWARE_TARGET_EL #define SEC_FIRMWARE_TARGET_EL 2
@@ -43,7 +43,7 @@ static int sec_firmware_get_data(const void *sec_firmware_img,char *desc;int ret; - conf_node_name =SEC_FIRMEWARE_FIT_CNF_NAME ; + conf_node_name =SEC_FIRMWARE_FIT_CNF_NAME ; conf_node_off =fit_conf_get_node (sec_firmware_img, conf_node_name);if (conf_node_off <0 ) {
@@ -123,7 +123,7 @@ static int sec_firmware_check_copy_loadable(const void *sec_firmware_img,const char *name, *str, *type;int len; - conf_node_name =SEC_FIRMEWARE_FIT_CNF_NAME ; + conf_node_name =SEC_FIRMWARE_FIT_CNF_NAME ; conf_node_off =fit_conf_get_node (sec_firmware_img, conf_node_name);if (conf_node_off <0 ) {
drivers/net/pfe_eth/pfe_firmware.c +2 -2
@@ -16,7 +16,7 @@#include <fsl_validate.h> #endif -#define PFE_FIRMEWARE_FIT_CNF_NAME "config at 1" +#define PFE_FIRMWARE_FIT_CNF_NAME "config at 1"static const void *pfe_fit_addr = (void *)CONFIG_SYS_LS_PFE_FW_ADDR ;
@@ -99,7 +99,7 @@ static int pfe_get_fw(const void **data,char *desc;int ret =0 ; - conf_node_name =PFE_FIRMEWARE_FIT_CNF_NAME ; + conf_node_name =PFE_FIRMWARE_FIT_CNF_NAME ; conf_node_off =fit_conf_get_node (pfe_fit_addr, conf_node_name);if (conf_node_off <0 ) {
Signature · 1 line
2.23.0
PATCH 2/2 Fix typo in macros, "FIRMEWARE" -> "FIRMWARE"
Quoted 1 line · Thomas Hebb
Signed-off-by Thomas Hebb <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191205/6059799f/attachment.sig>
PATCH 1/2 cosmetic: Fix spelling and whitespace errors
In reply to Thomas HebbQuoted 24 lines · Thomas Hebb
Signed-off-by Thomas Hebb <[email protected]>--- Makefile | 2 +- README | 4 ++-- arch/arm/cpu/armv8/sec_firmware.c | 2 +- arch/arm/mach-rockchip/Kconfig | 2 +- arch/arm/mach-rockchip/bootrom.c | 4 ++-- arch/arm/mach-rockchip/rk3399/Kconfig | 6 +++--- arch/arm/mach-rockchip/spl-boot-order.c | 2 +- board/rockchip/evb_rk3399/README | 2 +- common/spl/Kconfig | 4 ++-- doc/README.SPL | 2 +- doc/README.TPL | 2 +- doc/uImage.FIT/source_file_format.txt | 2 +- tools/binman/README | 2 +- tools/binman/README.entries | 4 ++-- 14 files changed, 20 insertions(+), 20 deletions(-)Makefile +0
-0
Makefile u-boot.sym: u-boot FORCE · line 1666
Quoted 5 lines
Makefile +1
-1@@ -1663,7 +1663,7 @@ u-boot.sym: u-boot FORCE # make sure no implicit rule kicks in $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; -# Handle descending into subdirectories listed in $(vmlinux-dirs) +# Handle descending into ubdirectories listed in $(u-boot-dirs)
"ubdirectories" should stay as "subdirectories" (or "sub-directories" which seems to placate Firefox's spell checker)
Quoted 8 lines
Makefile +0
-0# Preset locale variables to speed up the build process. Limit locale # tweaks to this spot to avoid wrong language settings when running # make menuconfig etc.README +0
-0
README Low Level (hardware related) configuration options: · line 3092
Quoted 7 lines
README +1
-1@@ -3087,7 +3087,7 @@ Low Level (hardware related) configuration options: compiling a NAND SPL. - CONFIG_TPL_BUILD - Modifies the behaviour of start.S when compiling a loader + Modifies the behaviour of start.S when compiling a loader that is executed after the SPL and before the actual U-Boot. It is loaded by the SPL.
The correct thing would be to replace "SPL" with "TPL" in the paragraph that follows. But I actually wonder if the content should be updated as one does not usually set SPL_BUILD or TPL_BUILD directly. The are both automatically defined by the build system.
Quoted 108 lines
README +1
-1@@ -3306,7 +3306,7 @@ Testing of U-Boot Modifications, Ports to New Hardware, etc.: If you have modified U-Boot sources (for instance added a new board or support for new devices, a new CPU, etc.) you are expected to provide feedback to the other developers. The feedback normally takes -the form of a "patch", i. e. a context diff against a certain (latest +the form of a "patch", i.e. a context diff against a certain (latest official or latest in the git repository) version of U-Boot sources. But before you submit such a patch, please verify that your modifi-arch/arm/cpu/armv8/sec_firmware.c +1
-1@@ -353,7 +353,7 @@ bool sec_firmware_support_hwrng(void)return true;#endif if (sec_firmware_addr &SEC_FIRMWARE_RUNNING ) { -return true; +return true; }return false;arch/arm/mach-rockchip/Kconfig +1
-1@@ -265,7 +265,7 @@ config TPL_ROCKCHIP_COMMON_BOARD Rockchip SoCs have similar boot process, prefer to use TPL for DRAM init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL common board is a basic TPL board init which can be shared for most - of SoCs to avoid copy-pase for different SoCs. + of SoCs to avoid copy-paste for different SoCs. config ROCKCHIP_BOOT_MODE_REG hex "Rockchip boot mode flag register address"arch/arm/mach-rockchip/bootrom.c +2
-2@@ -39,8 +39,8 @@ void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd)* to check it and back to bootrom at very early bootstage(before * some basic configurations(such as interrupts) been * changed by TPL/SPL, as the bootrom download operation -* relys on many default settings(such as interrupts) by -* it's self. +* relies on many default settings(such as interrupts) by +* itself. */ static bool check_back_to_brom_dnl_flag (void ) {arch/arm/mach-rockchip/rk3399/Kconfig +3
-3@@ -6,9 +6,9 @@ choice config TARGET_EVB_RK3399 bool "RK3399 evaluation board" help - RK3399evb is a evaluation board for Rockchp rk3399, - with full function and phisical connectors support like type-C ports, - usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial... + RK3399evb is a evaluation board for Rockchip RK3399, + with full function and physical connectors support like Type-C ports, + USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial... config TARGET_PUMA_RK3399 bool "Theobroma Systems RK3399-Q7 (Puma)"arch/arm/mach-rockchip/spl-boot-order.c +1
-1@@ -35,7 +35,7 @@ static int spl_node_to_boot_device(int node)/* * This should eventually move into the SPL code, once SPL becomes * aware of the block-device layer. Until then (and to avoid unneeded -* delays in getting this feature out, it lives at the board-level). +* delays in getting this feature out), it lives at the board-level. */ if (!uclass_get_device_by_of_offset (UCLASS_MMC , node, &parent)) {struct udevice *dev;board/rockchip/evb_rk3399/README +1
-1@@ -9,7 +9,7 @@ RK3399 key features we might use in U-Boot: * DRAM: 4GB-128MB dual-channel * eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 * SD/MMC: support SD 3.0, MMC 4.51 -* USB: USB3.0 typc-C port *2 with dwc3 controller +* USB: USB3.0 type-C port *2 with dwc3 controller * USB2.0 EHCI host port *2 * Display: RGB/HDMI/DP/MIPI/EDPcommon/spl/Kconfig +1
-1@@ -268,7 +268,7 @@ config SPL_BANNER_PRINT default y help If this option is enabled, SPL will print the banner with version - info. Disabling this option could be useful to reduce TPL boot time + info. Disabling this option could be useful to reduce SPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config TPL_BANNER_PRINT
common/spl/Kconfig config TPL_BANNER_PRINT · line 279
Quoted 3 lines
common/spl/Kconfig +0
-0@@ -277,7 +277,7 @@ config TPL_BANNER_PRINT default y help If this option is enabled, SPL will not print the banner with version
There's another one just here ~~^
Quoted 71 lines
common/spl/Kconfig +1
-1- info. Disabling this option could be useful to reduce SPL boot time + info. Disabling this option could be useful to reduce TPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config SPL_EARLY_BSSdoc/README.SPL +1
-1@@ -75,7 +75,7 @@ with: - the nodes with one pre-relocation property: 'u-boot,dm-pre-reloc' or 'u-boot,dm-spl' -ftgrep is also used to remove: +fdtgrep is also used to remove: - the properties defined in CONFIG_OF_SPL_REMOVE_PROPS - all the pre-relocation properties ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')doc/README.TPL +1
-1@@ -31,7 +31,7 @@ make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD. The SPL options are shared by SPL and TPL, the board config file should determine which SPL options to choose based on whether CONFIG_TPL_BUILD -is set. Source files can be compiled for TPL with options choosed in the +is set. Source files can be compiled for TPL with options chosen in the board config file. TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes withdoc/uImage.FIT/source_file_format.txt +1
-1@@ -262,7 +262,7 @@ o config-1 - loadables : Unit name containing a list of additional binaries to be loaded at their given locations. "loadables" is a comma-separated list of strings. U-Boot will load each binary at its given start-address and - may optionaly invoke additional post-processing steps on this binary based + may optionally invoke additional post-processing steps on this binary based on its component image node type. - compatible : The root compatible string of the U-Boot device tree that this configuration shall automatically match when CONFIG_FIT_BEST_MATCH istools/binman/README +1
-1@@ -73,7 +73,7 @@ any dependencies between them and brought in as needed - Provides for a standard image description available in the build and at run-time -- SoC-specific image-signing tools can be accomodated +- SoC-specific image-signing tools can be accommodated - Avoids cluttering the U-Boot build system with image-building code - The image description is automatically available at run-time in U-Boot, SPL. It can be made available to other software alsotools/binman/README.entries +1
-1@@ -519,7 +519,7 @@ Properties / Entry arguments: This file contains code used by the SoC that is required to make it work. The Management Engine is like a background task that runs things that are -not clearly documented, but may include keyboard, deplay and network +not clearly documented, but may include keyboard, display and network access. For platform that use ME it is not possible to disable it. U-Boot does not directly execute code in the ME binary.
tools/binman/README.entries Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f · line 599
Quoted 8 lines
tools/binman/README.entries +1
-1@@ -593,7 +593,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f Properties / Entry arguments: - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') -This enrty is valid for PowerPC mpc85xx cpus. This entry holds +This entry is valid for PowerPC mpc85xx cpus. This entry holds 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
Other than the things I've pointed out
PATCH v2 1/1 cosmetic: Fix spelling and whitespace errors
In reply to Thomas Hebb--- Makefile | 2 +- README | 16 +++++++++------- arch/arm/cpu/armv8/sec_firmware.c | 2 +- arch/arm/mach-rockchip/Kconfig | 2 +- arch/arm/mach-rockchip/bootrom.c | 4 ++-- arch/arm/mach-rockchip/rk3399/Kconfig | 6 +++--- arch/arm/mach-rockchip/spl-boot-order.c | 2 +- board/rockchip/evb_rk3399/README | 2 +- common/spl/Kconfig | 6 +++--- doc/README.SPL | 2 +- doc/README.TPL | 2 +- doc/uImage.FIT/source_file_format.txt | 2 +- tools/binman/README | 2 +- tools/binman/README.entries | 4 ++-- 14 files changed, 28 insertions(+), 26 deletions(-)
Makefile +1 -1
@@ -1663,7 +1663,7 @@ u-boot.sym: u-boot FORCE # make sure no implicit rule kicks in $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; -# Handle descending into subdirectories listed in $(vmlinux-dirs) +# Handle descending into subdirectories listed in $(u-boot-dirs) # Preset locale variables to speed up the build process. Limit locale # tweaks to this spot to avoid wrong language settings when running # make menuconfig etc.
README +9 -7
@@ -3082,14 +3082,16 @@ Low Level (hardware related) configuration options: instruction cache) is still performed. - CONFIG_SPL_BUILD - Modifies the behaviour of start.S when compiling a loader - that is executed before the actual U-Boot. E.g. when - compiling a NAND SPL. + Set when the currently-running compilation is for an artifact + that will end up in the SPL (as opposed to the TPL or U-Boot + proper). Code that needs stage-specific behavior should check + this. - CONFIG_TPL_BUILD - Modifies the behaviour of start.S when compiling a loader - that is executed after the SPL and before the actual U-Boot. - It is loaded by the SPL. + Set when the currently-running compilation is for an artifact + that will end up in the TPL (as opposed to the SPL or U-Boot + proper). Code that needs stage-specific behavior should check + this. - CONFIG_SYS_MPC85XX_NO_RESETVEC Only for 85xx systems. If this variable is specified, the section
@@ -3306,7 +3308,7 @@ Testing of U-Boot Modifications, Ports to New Hardware, etc.: If you have modified U-Boot sources (for instance added a new board or support for new devices, a new CPU, etc.) you are expected to provide feedback to the other developers. The feedback normally takes -the form of a "patch", i. e. a context diff against a certain (latest +the form of a "patch", i.e. a context diff against a certain (latest official or latest in the git repository) version of U-Boot sources. But before you submit such a patch, please verify that your modifi-
arch/arm/cpu/armv8/sec_firmware.c +1 -1
@@ -353,7 +353,7 @@ bool sec_firmware_support_hwrng(void)return true;#endif if (sec_firmware_addr &SEC_FIRMWARE_RUNNING ) { -return true; +return true; }return false;
arch/arm/mach-rockchip/Kconfig +1 -1
@@ -265,7 +265,7 @@ config TPL_ROCKCHIP_COMMON_BOARD Rockchip SoCs have similar boot process, prefer to use TPL for DRAM init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL common board is a basic TPL board init which can be shared for most - of SoCs to avoid copy-pase for different SoCs. + of SoCs to avoid copy-paste for different SoCs. config ROCKCHIP_BOOT_MODE_REG hex "Rockchip boot mode flag register address"
arch/arm/mach-rockchip/bootrom.c +2 -2
@@ -39,8 +39,8 @@ void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd)* to check it and back to bootrom at very early bootstage(before * some basic configurations(such as interrupts) been * changed by TPL/SPL, as the bootrom download operation -* relys on many default settings(such as interrupts) by -* it's self. +* relies on many default settings(such as interrupts) by +* itself. */ static bool check_back_to_brom_dnl_flag (void ) {
arch/arm/mach-rockchip/rk3399/Kconfig +3 -3
@@ -6,9 +6,9 @@ choice config TARGET_EVB_RK3399 bool "RK3399 evaluation board" help - RK3399evb is a evaluation board for Rockchp rk3399, - with full function and phisical connectors support like type-C ports, - usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial... + RK3399evb is a evaluation board for Rockchip RK3399, + with full function and physical connectors support like Type-C ports, + USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial... config TARGET_PUMA_RK3399 bool "Theobroma Systems RK3399-Q7 (Puma)"
arch/arm/mach-rockchip/spl-boot-order.c +1 -1
@@ -35,7 +35,7 @@ static int spl_node_to_boot_device(int node)/* * This should eventually move into the SPL code, once SPL becomes * aware of the block-device layer. Until then (and to avoid unneeded -* delays in getting this feature out, it lives at the board-level). +* delays in getting this feature out), it lives at the board-level. */ if (!uclass_get_device_by_of_offset (UCLASS_MMC , node, &parent)) {struct udevice *dev;
board/rockchip/evb_rk3399/README +1 -1
@@ -9,7 +9,7 @@ RK3399 key features we might use in U-Boot: * DRAM: 4GB-128MB dual-channel * eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 * SD/MMC: support SD 3.0, MMC 4.51 -* USB: USB3.0 typc-C port *2 with dwc3 controller +* USB: USB3.0 type-C port *2 with dwc3 controller * USB2.0 EHCI host port *2 * Display: RGB/HDMI/DP/MIPI/EDP
common/spl/Kconfig +3 -3
@@ -268,7 +268,7 @@ config SPL_BANNER_PRINT default y help If this option is enabled, SPL will print the banner with version - info. Disabling this option could be useful to reduce TPL boot time + info. Disabling this option could be useful to reduce SPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config TPL_BANNER_PRINT
@@ -276,8 +276,8 @@ config TPL_BANNER_PRINT depends on TPL default y help - If this option is enabled, SPL will not print the banner with version - info. Disabling this option could be useful to reduce SPL boot time + If this option is enabled, TPL will print the banner with version + info. Disabling this option could be useful to reduce TPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config SPL_EARLY_BSS
doc/README.SPL +1 -1
@@ -75,7 +75,7 @@ with: - the nodes with one pre-relocation property: 'u-boot,dm-pre-reloc' or 'u-boot,dm-spl' -ftgrep is also used to remove: +fdtgrep is also used to remove: - the properties defined in CONFIG_OF_SPL_REMOVE_PROPS - all the pre-relocation properties ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')
doc/README.TPL +1 -1
@@ -31,7 +31,7 @@ make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD. The SPL options are shared by SPL and TPL, the board config file should determine which SPL options to choose based on whether CONFIG_TPL_BUILD -is set. Source files can be compiled for TPL with options choosed in the +is set. Source files can be compiled for TPL with options chosen in the board config file. TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes with
doc/uImage.FIT/source_file_format.txt +1 -1
@@ -262,7 +262,7 @@ o config-1 - loadables : Unit name containing a list of additional binaries to be loaded at their given locations. "loadables" is a comma-separated list of strings. U-Boot will load each binary at its given start-address and - may optionaly invoke additional post-processing steps on this binary based + may optionally invoke additional post-processing steps on this binary based on its component image node type. - compatible : The root compatible string of the U-Boot device tree that this configuration shall automatically match when CONFIG_FIT_BEST_MATCH is
tools/binman/README +1 -1
@@ -73,7 +73,7 @@ any dependencies between them and brought in as needed - Provides for a standard image description available in the build and at run-time -- SoC-specific image-signing tools can be accomodated +- SoC-specific image-signing tools can be accommodated - Avoids cluttering the U-Boot build system with image-building code - The image description is automatically available at run-time in U-Boot, SPL. It can be made available to other software also
tools/binman/README.entries +2 -2
@@ -519,7 +519,7 @@ Properties / Entry arguments: This file contains code used by the SoC that is required to make it work. The Management Engine is like a background task that runs things that are -not clearly documented, but may include keyboard, deplay and network +not clearly documented, but may include keyboard, display and network access. For platform that use ME it is not possible to disable it. U-Boot does not directly execute code in the ME binary.
@@ -593,7 +593,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f Properties / Entry arguments: - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') -This enrty is valid for PowerPC mpc85xx cpus. This entry holds +This entry is valid for PowerPC mpc85xx cpus. This entry holds 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
Signature · 1 line
2.23.0
PATCH v2 1/1 cosmetic: Fix spelling and whitespace errors
Quoted 1 line · Thomas Hebb
Signed-off-by Thomas Hebb <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191203/a4ab883f/attachment-0001.sig>
PATCH v2 1/1 cosmetic: Fix spelling and whitespace errors
In reply to Thomas HebbHi Thomas,
Could you add commit message for patch and split the patch into
multi patches
base on the module?
Thanks,
- Kever
Quoted 249 lines · Thomas Hebb
Signed-off-by Thomas Hebb <[email protected]>--- Makefile | 2 +- README | 16 +++++++++------- arch/arm/cpu/armv8/sec_firmware.c | 2 +- arch/arm/mach-rockchip/Kconfig | 2 +- arch/arm/mach-rockchip/bootrom.c | 4 ++-- arch/arm/mach-rockchip/rk3399/Kconfig | 6 +++--- arch/arm/mach-rockchip/spl-boot-order.c | 2 +- board/rockchip/evb_rk3399/README | 2 +- common/spl/Kconfig | 6 +++--- doc/README.SPL | 2 +- doc/README.TPL | 2 +- doc/uImage.FIT/source_file_format.txt | 2 +- tools/binman/README | 2 +- tools/binman/README.entries | 4 ++-- 14 files changed, 28 insertions(+), 26 deletions(-)Makefile +1
-1@@ -1663,7 +1663,7 @@ u-boot.sym: u-boot FORCE # make sure no implicit rule kicks in $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; -# Handle descending into subdirectories listed in $(vmlinux-dirs) +# Handle descending into subdirectories listed in $(u-boot-dirs) # Preset locale variables to speed up the build process. Limit locale # tweaks to this spot to avoid wrong language settings when running # make menuconfig etc.README +9
-7@@ -3082,14 +3082,16 @@ Low Level (hardware related) configuration options: instruction cache) is still performed. - CONFIG_SPL_BUILD - Modifies the behaviour of start.S when compiling a loader - that is executed before the actual U-Boot. E.g. when - compiling a NAND SPL. + Set when the currently-running compilation is for an artifact + that will end up in the SPL (as opposed to the TPL or U-Boot + proper). Code that needs stage-specific behavior should check + this. - CONFIG_TPL_BUILD - Modifies the behaviour of start.S when compiling a loader - that is executed after the SPL and before the actual U-Boot. - It is loaded by the SPL. + Set when the currently-running compilation is for an artifact + that will end up in the TPL (as opposed to the SPL or U-Boot + proper). Code that needs stage-specific behavior should check + this. - CONFIG_SYS_MPC85XX_NO_RESETVEC Only for 85xx systems. If this variable is specified, the section@@ -3306,7 +3308,7 @@ Testing of U-Boot Modifications, Ports to New Hardware, etc.: If you have modified U-Boot sources (for instance added a new board or support for new devices, a new CPU, etc.) you are expected to provide feedback to the other developers. The feedback normally takes -the form of a "patch", i. e. a context diff against a certain (latest +the form of a "patch", i.e. a context diff against a certain (latest official or latest in the git repository) version of U-Boot sources. But before you submit such a patch, please verify that your modifi-arch/arm/cpu/armv8/sec_firmware.c +1
-1@@ -353,7 +353,7 @@ bool sec_firmware_support_hwrng(void)return true;#endif if (sec_firmware_addr &SEC_FIRMWARE_RUNNING ) { -return true; +return true; }return false;arch/arm/mach-rockchip/Kconfig +1
-1@@ -265,7 +265,7 @@ config TPL_ROCKCHIP_COMMON_BOARD Rockchip SoCs have similar boot process, prefer to use TPL for DRAM init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL common board is a basic TPL board init which can be shared for most - of SoCs to avoid copy-pase for different SoCs. + of SoCs to avoid copy-paste for different SoCs. config ROCKCHIP_BOOT_MODE_REG hex "Rockchip boot mode flag register address"arch/arm/mach-rockchip/bootrom.c +2
-2@@ -39,8 +39,8 @@ void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd)* to check it and back to bootrom at very early bootstage(before * some basic configurations(such as interrupts) been * changed by TPL/SPL, as the bootrom download operation -* relys on many default settings(such as interrupts) by -* it's self. +* relies on many default settings(such as interrupts) by +* itself. */ static bool check_back_to_brom_dnl_flag (void ) {arch/arm/mach-rockchip/rk3399/Kconfig +3
-3@@ -6,9 +6,9 @@ choice config TARGET_EVB_RK3399 bool "RK3399 evaluation board" help - RK3399evb is a evaluation board for Rockchp rk3399, - with full function and phisical connectors support like type-C ports, - usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial... + RK3399evb is a evaluation board for Rockchip RK3399, + with full function and physical connectors support like Type-C ports, + USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial... config TARGET_PUMA_RK3399 bool "Theobroma Systems RK3399-Q7 (Puma)"arch/arm/mach-rockchip/spl-boot-order.c +1
-1@@ -35,7 +35,7 @@ static int spl_node_to_boot_device(int node)/* * This should eventually move into the SPL code, once SPL becomes * aware of the block-device layer. Until then (and to avoid unneeded -* delays in getting this feature out, it lives at the board-level). +* delays in getting this feature out), it lives at the board-level. */ if (!uclass_get_device_by_of_offset (UCLASS_MMC , node, &parent)) {struct udevice *dev;board/rockchip/evb_rk3399/README +1
-1@@ -9,7 +9,7 @@ RK3399 key features we might use in U-Boot: * DRAM: 4GB-128MB dual-channel * eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 * SD/MMC: support SD 3.0, MMC 4.51 -* USB: USB3.0 typc-C port *2 with dwc3 controller +* USB: USB3.0 type-C port *2 with dwc3 controller * USB2.0 EHCI host port *2 * Display: RGB/HDMI/DP/MIPI/EDPcommon/spl/Kconfig +3
-3@@ -268,7 +268,7 @@ config SPL_BANNER_PRINT default y help If this option is enabled, SPL will print the banner with version - info. Disabling this option could be useful to reduce TPL boot time + info. Disabling this option could be useful to reduce SPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config TPL_BANNER_PRINT@@ -276,8 +276,8 @@ config TPL_BANNER_PRINT depends on TPL default y help - If this option is enabled, SPL will not print the banner with version - info. Disabling this option could be useful to reduce SPL boot time + If this option is enabled, TPL will print the banner with version + info. Disabling this option could be useful to reduce TPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config SPL_EARLY_BSSdoc/README.SPL +1
-1@@ -75,7 +75,7 @@ with: - the nodes with one pre-relocation property: 'u-boot,dm-pre-reloc' or 'u-boot,dm-spl' -ftgrep is also used to remove: +fdtgrep is also used to remove: - the properties defined in CONFIG_OF_SPL_REMOVE_PROPS - all the pre-relocation properties ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')doc/README.TPL +1
-1@@ -31,7 +31,7 @@ make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD. The SPL options are shared by SPL and TPL, the board config file should determine which SPL options to choose based on whether CONFIG_TPL_BUILD -is set. Source files can be compiled for TPL with options choosed in the +is set. Source files can be compiled for TPL with options chosen in the board config file. TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes withdoc/uImage.FIT/source_file_format.txt +1
-1@@ -262,7 +262,7 @@ o config-1 - loadables : Unit name containing a list of additional binaries to be loaded at their given locations. "loadables" is a comma-separated list of strings. U-Boot will load each binary at its given start-address and - may optionaly invoke additional post-processing steps on this binary based + may optionally invoke additional post-processing steps on this binary based on its component image node type. - compatible : The root compatible string of the U-Boot device tree that this configuration shall automatically match when CONFIG_FIT_BEST_MATCH istools/binman/README +1
-1@@ -73,7 +73,7 @@ any dependencies between them and brought in as needed - Provides for a standard image description available in the build and at run-time -- SoC-specific image-signing tools can be accomodated +- SoC-specific image-signing tools can be accommodated - Avoids cluttering the U-Boot build system with image-building code - The image description is automatically available at run-time in U-Boot, SPL. It can be made available to other software alsotools/binman/README.entries +2
-2@@ -519,7 +519,7 @@ Properties / Entry arguments: This file contains code used by the SoC that is required to make it work. The Management Engine is like a background task that runs things that are -not clearly documented, but may include keyboard, deplay and network +not clearly documented, but may include keyboard, display and network access. For platform that use ME it is not possible to disable it. U-Boot does not directly execute code in the ME binary.@@ -593,7 +593,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f Properties / Entry arguments: - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') -This enrty is valid for PowerPC mpc85xx cpus. This entry holds +This entry is valid for PowerPC mpc85xx cpus. This entry holds 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
PATCH v2 1/1 cosmetic: Fix spelling and whitespace errors
Quoted 8 lines · Kever Yang
Hi Thomas,
Could you add commit message for patch and split the patch into
multi patchesbase on the module?
Hi Kever,
I think this already got merged, didn't it?
-Tom
Quoted 257 lines
Thanks,
- Kever
Quoted 249 lines · Thomas Hebb
Signed-off-by Thomas Hebb <[email protected]>--- Makefile | 2 +- README | 16 +++++++++------- arch/arm/cpu/armv8/sec_firmware.c | 2 +- arch/arm/mach-rockchip/Kconfig | 2 +- arch/arm/mach-rockchip/bootrom.c | 4 ++-- arch/arm/mach-rockchip/rk3399/Kconfig | 6 +++--- arch/arm/mach-rockchip/spl-boot-order.c | 2 +- board/rockchip/evb_rk3399/README | 2 +- common/spl/Kconfig | 6 +++--- doc/README.SPL | 2 +- doc/README.TPL | 2 +- doc/uImage.FIT/source_file_format.txt | 2 +- tools/binman/README | 2 +- tools/binman/README.entries | 4 ++-- 14 files changed, 28 insertions(+), 26 deletions(-)Makefile +1
-1@@ -1663,7 +1663,7 @@ u-boot.sym: u-boot FORCE # make sure no implicit rule kicks in $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; -# Handle descending into subdirectories listed in $(vmlinux-dirs) +# Handle descending into subdirectories listed in $(u-boot-dirs) # Preset locale variables to speed up the build process. Limit locale # tweaks to this spot to avoid wrong language settings when running # make menuconfig etc.README +9
-7@@ -3082,14 +3082,16 @@ Low Level (hardware related) configuration options: instruction cache) is still performed. - CONFIG_SPL_BUILD - Modifies the behaviour of start.S when compiling a loader - that is executed before the actual U-Boot. E.g. when - compiling a NAND SPL. + Set when the currently-running compilation is for an artifact + that will end up in the SPL (as opposed to the TPL or U-Boot + proper). Code that needs stage-specific behavior should check + this. - CONFIG_TPL_BUILD - Modifies the behaviour of start.S when compiling a loader - that is executed after the SPL and before the actual U-Boot. - It is loaded by the SPL. + Set when the currently-running compilation is for an artifact + that will end up in the TPL (as opposed to the SPL or U-Boot + proper). Code that needs stage-specific behavior should check + this. - CONFIG_SYS_MPC85XX_NO_RESETVEC Only for 85xx systems. If this variable is specified, the section@@ -3306,7 +3308,7 @@ Testing of U-Boot Modifications, Ports to New Hardware, etc.: If you have modified U-Boot sources (for instance added a new board or support for new devices, a new CPU, etc.) you are expected to provide feedback to the other developers. The feedback normally takes -the form of a "patch", i. e. a context diff against a certain (latest +the form of a "patch", i.e. a context diff against a certain (latest official or latest in the git repository) version of U-Boot sources. But before you submit such a patch, please verify that your modifi-arch/arm/cpu/armv8/sec_firmware.c +1
-1@@ -353,7 +353,7 @@ bool sec_firmware_support_hwrng(void)return true;#endif if (sec_firmware_addr &SEC_FIRMWARE_RUNNING ) { -return true; +return true; }return false;arch/arm/mach-rockchip/Kconfig +1
-1@@ -265,7 +265,7 @@ config TPL_ROCKCHIP_COMMON_BOARD Rockchip SoCs have similar boot process, prefer to use TPL for DRAM init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL common board is a basic TPL board init which can be shared for most - of SoCs to avoid copy-pase for different SoCs. + of SoCs to avoid copy-paste for different SoCs. config ROCKCHIP_BOOT_MODE_REG hex "Rockchip boot mode flag register address"arch/arm/mach-rockchip/bootrom.c +2
-2@@ -39,8 +39,8 @@ void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd)* to check it and back to bootrom at very early bootstage(before * some basic configurations(such as interrupts) been * changed by TPL/SPL, as the bootrom download operation -* relys on many default settings(such as interrupts) by -* it's self. +* relies on many default settings(such as interrupts) by +* itself. */ static bool check_back_to_brom_dnl_flag (void ) {arch/arm/mach-rockchip/rk3399/Kconfig +3
-3@@ -6,9 +6,9 @@ choice config TARGET_EVB_RK3399 bool "RK3399 evaluation board" help - RK3399evb is a evaluation board for Rockchp rk3399, - with full function and phisical connectors support like type-C ports, - usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial... + RK3399evb is a evaluation board for Rockchip RK3399, + with full function and physical connectors support like Type-C ports, + USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial... config TARGET_PUMA_RK3399 bool "Theobroma Systems RK3399-Q7 (Puma)"arch/arm/mach-rockchip/spl-boot-order.c +1
-1@@ -35,7 +35,7 @@ static int spl_node_to_boot_device(int node)/* * This should eventually move into the SPL code, once SPL becomes * aware of the block-device layer. Until then (and to avoid unneeded -* delays in getting this feature out, it lives at the board-level). +* delays in getting this feature out), it lives at the board-level. */ if (!uclass_get_device_by_of_offset (UCLASS_MMC , node, &parent)) {struct udevice *dev;board/rockchip/evb_rk3399/README +1
-1@@ -9,7 +9,7 @@ RK3399 key features we might use in U-Boot: * DRAM: 4GB-128MB dual-channel * eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 * SD/MMC: support SD 3.0, MMC 4.51 -* USB: USB3.0 typc-C port *2 with dwc3 controller +* USB: USB3.0 type-C port *2 with dwc3 controller * USB2.0 EHCI host port *2 * Display: RGB/HDMI/DP/MIPI/EDPcommon/spl/Kconfig +3
-3@@ -268,7 +268,7 @@ config SPL_BANNER_PRINT default y help If this option is enabled, SPL will print the banner with version - info. Disabling this option could be useful to reduce TPL boot time + info. Disabling this option could be useful to reduce SPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config TPL_BANNER_PRINT@@ -276,8 +276,8 @@ config TPL_BANNER_PRINT depends on TPL default y help - If this option is enabled, SPL will not print the banner with version - info. Disabling this option could be useful to reduce SPL boot time + If this option is enabled, TPL will print the banner with version + info. Disabling this option could be useful to reduce TPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config SPL_EARLY_BSSdoc/README.SPL +1
-1@@ -75,7 +75,7 @@ with: - the nodes with one pre-relocation property: 'u-boot,dm-pre-reloc' or 'u-boot,dm-spl' -ftgrep is also used to remove: +fdtgrep is also used to remove: - the properties defined in CONFIG_OF_SPL_REMOVE_PROPS - all the pre-relocation properties ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')doc/README.TPL +1
-1@@ -31,7 +31,7 @@ make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD. The SPL options are shared by SPL and TPL, the board config file should determine which SPL options to choose based on whether CONFIG_TPL_BUILD -is set. Source files can be compiled for TPL with options choosed in the +is set. Source files can be compiled for TPL with options chosen in the board config file. TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes withdoc/uImage.FIT/source_file_format.txt +1
-1@@ -262,7 +262,7 @@ o config-1 - loadables : Unit name containing a list of additional binaries to be loaded at their given locations. "loadables" is a comma-separated list of strings. U-Boot will load each binary at its given start-address and - may optionaly invoke additional post-processing steps on this binary based + may optionally invoke additional post-processing steps on this binary based on its component image node type. - compatible : The root compatible string of the U-Boot device tree that this configuration shall automatically match when CONFIG_FIT_BEST_MATCH istools/binman/README +1
-1@@ -73,7 +73,7 @@ any dependencies between them and brought in as needed - Provides for a standard image description available in the build and at run-time -- SoC-specific image-signing tools can be accomodated +- SoC-specific image-signing tools can be accommodated - Avoids cluttering the U-Boot build system with image-building code - The image description is automatically available at run-time in U-Boot, SPL. It can be made available to other software alsotools/binman/README.entries +2
-2@@ -519,7 +519,7 @@ Properties / Entry arguments: This file contains code used by the SoC that is required to make it work. The Management Engine is like a background task that runs things that are -not clearly documented, but may include keyboard, deplay and network +not clearly documented, but may include keyboard, display and network access. For platform that use ME it is not possible to disable it. U-Boot does not directly execute code in the ME binary.@@ -593,7 +593,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f Properties / Entry arguments: - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin') -This enrty is valid for PowerPC mpc85xx cpus. This entry holds +This entry is valid for PowerPC mpc85xx cpus. This entry holds 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.