dt-bindings: usb: Convert Allwinner USB PHY controller to a schema
PATCH v2 1/1 dt-bindings: usb: Convert Allwinner USB PHY controller to a schema
The Allwinner SoCs have a USB PHY controller that is supported in Linux, with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas.
---
Changes from v1:
- Split the schemas into files of their own to make it more readable
--- .../phy/allwinner,sun4i-a10-usb-phy.yaml | 105 ++++++++++++++ .../phy/allwinner,sun50i-a64-usb-phy.yaml | 106 ++++++++++++++ .../phy/allwinner,sun50i-h6-usb-phy.yaml | 105 ++++++++++++++ .../phy/allwinner,sun5i-a13-usb-phy.yaml | 93 ++++++++++++ .../phy/allwinner,sun6i-a31-usb-phy.yaml | 119 +++++++++++++++ .../phy/allwinner,sun8i-a23-usb-phy.yaml | 102 +++++++++++++ .../phy/allwinner,sun8i-a83t-usb-phy.yaml | 122 ++++++++++++++++ .../phy/allwinner,sun8i-h3-usb-phy.yaml | 137 ++++++++++++++++++ .../phy/allwinner,sun8i-r40-usb-phy.yaml | 119 +++++++++++++++ .../phy/allwinner,sun8i-v3s-usb-phy.yaml | 86 +++++++++++ .../devicetree/bindings/phy/sun4i-usb-phy.txt | 68 --------- 11 files changed, 1094 insertions(+), 68 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml new file +105 -0
@@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <[email protected]> + - Maxime Ripard <[email protected]> + +properties: + "#phy-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-usb-phy + - allwinner,sun7i-a20-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + - const: pmu2 + + clocks: + maxItems: 1 + description: USB PHY bus clock + + clock-names: + const: usb_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/sun4i-a10-ccu.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + usbphy: phy@01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun4i-a10-usb-phy"; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; + reg-names = "phy_ctrl", "pmu1", "pmu2"; + clocks = <&ccu CLK_USB_PHY>; + clock-names = "usb_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; + usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; + usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + };
Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml new file +106 -0
106 lines not on this page · raw message
Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml new file +105 -0
105 lines not on this page · raw message
Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml new file +93 -0
93 lines not on this page · raw message
Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml new file +119 -0
119 lines not on this page · raw message
Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml new file +102 -0
102 lines not on this page · raw message
Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml new file +122 -0
122 lines not on this page · raw message
Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml new file +137 -0
137 lines not on this page · raw message
Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml new file +119 -0
119 lines not on this page · raw message
Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml new file +86 -0
86 lines not on this page · raw message
Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt deleted +0 -68
68 lines not on this page · raw message
Signature · 1 line
2.23.0
Quoted 28 lines · Maxime Ripard
The Allwinner SoCs have a USB PHY controller that is supported in Linux, with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas.
Signed-off-by Maxime Ripard <[email protected]>---
Changes from v1:
- Split the schemas into files of their own to make it more readable--- .../phy/allwinner,sun4i-a10-usb-phy.yaml | 105 ++++++++++++++ .../phy/allwinner,sun50i-a64-usb-phy.yaml | 106 ++++++++++++++ .../phy/allwinner,sun50i-h6-usb-phy.yaml | 105 ++++++++++++++ .../phy/allwinner,sun5i-a13-usb-phy.yaml | 93 ++++++++++++ .../phy/allwinner,sun6i-a31-usb-phy.yaml | 119 +++++++++++++++ .../phy/allwinner,sun8i-a23-usb-phy.yaml | 102 +++++++++++++ .../phy/allwinner,sun8i-a83t-usb-phy.yaml | 122 ++++++++++++++++ .../phy/allwinner,sun8i-h3-usb-phy.yaml | 137 ++++++++++++++++++ .../phy/allwinner,sun8i-r40-usb-phy.yaml | 119 +++++++++++++++ .../phy/allwinner,sun8i-v3s-usb-phy.yaml | 86 +++++++++++ .../devicetree/bindings/phy/sun4i-usb-phy.txt | 68 --------- 11 files changed, 1094 insertions(+), 68 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
Quoted 9 lines
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
Applied, thanks.
Rob