arm64: dts: meson: add libretech-pc support
Subsystems (2)
Jerome Brunet
reviewerv2 cover arm64: dts: meson: add libretech-pc support
This patchset adds support the new libretech PC platform, aka tartiflette. There is two variants of this platform, one with the S905D and another with the S912.
Changes since v1 [0]:
* update adc keys
* add phy irq pinctrl configuration
* update leds description
[0]: https://lkml.kernel.org/r/[email protected]
Jerome Brunet (4):
arm64: dts: meson: gxl: add i2c C pins
arm64: defconfig: enable FUSB302 as module
dt-bindings: arm: amlogic: add libretech-pc bindings
arm64: dts: meson: add libretech-pc boards support
.../devicetree/bindings/arm/amlogic.yaml | 2 + arch/arm64/boot/dts/amlogic/Makefile | 2 + .../dts/amlogic/meson-gx-libretech-pc.dtsi | 375 ++++++++++++++++++ .../amlogic/meson-gxl-s905d-libretech-pc.dts | 16 + arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 9 + .../amlogic/meson-gxm-s912-libretech-pc.dts | 62 +++ arch/arm64/configs/defconfig | 2 + 7 files changed, 468 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
Signature · 1 line
2.23.0
Jerome Brunet
reviewerPATCH v2 1/4 arm64: dts: meson: gxl: add i2c C pins
Add the DV18 and DV19 pinmux setting for the i2c C of the gxl family
--- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +9 -0
@@ -533,6 +533,15 @@ }; }; + i2c_c_dv18_pins: i2c_c_dv18 { + mux { + groups = "i2c_sck_c_dv19", + "i2c_sda_c_dv18"; + function = "i2c_c"; + bias-disable; + }; + }; + eth_pins: eth_c { mux { groups = "eth_mdio",
Signature · 1 line
2.23.0
Jerome Brunet
reviewerPATCH v2 2/4 arm64: defconfig: enable FUSB302 as module
In reply to Jerome BrunetEnable the type C fusb302 driver as module
--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
@@ -603,6 +603,8 @@ CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_USB_RENESAS_USB3=m CONFIG_TYPEC=m +CONFIG_TYPEC_TCPM=m +CONFIG_TYPEC_FUSB302=m CONFIG_TYPEC_HD3SS3220=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32
Signature · 7 lines
2.23.0 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
Jerome Brunet
reviewerPATCH v2 3/4 dt-bindings: arm: amlogic: add libretech-pc bindings
In reply to Jerome BrunetAdd the board bindings for the libretech PC form factor
--- Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/amlogic.yaml +2 -0
@@ -104,6 +104,7 @@ properties: - enum: - amlogic,p230 - amlogic,p231 + - libretech,aml-s905d-pc - phicomm,n1 - const: amlogic,s905d - const: amlogic,meson-gxl
@@ -115,6 +116,7 @@ properties: - amlogic,q201 - khadas,vim2 - kingnovel,r-box-pro + - libretech,aml-s912-pc - nexbox,a1 - tronsmart,vega-s96 - const: amlogic,s912
Signature · 1 line
2.23.0
Jerome Brunet
reviewerPATCH v2 4/4 arm64: dts: meson: add libretech-pc boards support
In reply to Jerome BrunetAdd support for the the amlogic libretech-pc platform, aka tartiflette. There is 2 variants of the platform, one with the s905d, the other with the s912.
--- arch/arm64/boot/dts/amlogic/Makefile | 2 + .../dts/amlogic/meson-gx-libretech-pc.dtsi | 375 ++++++++++++++++++ .../amlogic/meson-gxl-s905d-libretech-pc.dts | 16 + .../amlogic/meson-gxm-s912-libretech-pc.dts | 62 +++ 4 files changed, 455 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
arch/arm64/boot/dts/amlogic/Makefile +2 -0
@@ -29,11 +29,13 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi new file +375 -0
375 lines not on this page · raw message
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts new file +16 -0
@@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Author: Jerome Brunet <[email protected]> + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-libretech-pc.dtsi" + +/ { + compatible = "libretech,aml-s905d-pc", "amlogic,s905d", + "amlogic,meson-gxl"; + model = "Libre Computer AML-S905D-PC"; +};
arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts new file +62 -0
62 lines not on this page · raw message
Signature · 1 line
2.23.0
Kevin Hilman
maintainerQuoted 8 lines · Jerome Brunet
This patchset adds support the new libretech PC platform, aka tartiflette. There is two variants of this platform, one with the S905D and another with the S912.
Changes since v1 [0]:
* update adc keys
* add phy irq pinctrl configuration
* update leds description
Queued for v5.6,
Kevin
This series was applied to khilman/linux-amlogic.git (refs/heads/for-next).
Hello:
This series was applied to khilman/linux-amlogic.git (refs/heads/for-next).
Quoted 10 lines · On Mon, 9 Dec 2019 15:38:32 +0100 you wrote:
This patchset adds support the new libretech PC platform, aka tartiflette. There is two variants of this platform, one with the S905D and another with the S912.
Changes since v1 [0]:
* update adc keys
* add phy irq pinctrl configuration
* update leds description[...]
Here is a summary with links:
- [v2,1/4] arm64: dts: meson: gxl: add i2c C pins
https://git.kernel.org/khilman/linux-amlogic/c/4e11697528ebb0b6abdbd23e41ce64638739e5a3 - [v2,2/4] arm64: defconfig: enable FUSB302 as module https://git.kernel.org/khilman/linux-amlogic/c/afa7fb9cc222d301e51f967a26743b9076474c92 - [v2,3/4] dt-bindings: arm: amlogic: add libretech-pc bindings https://git.kernel.org/khilman/linux-amlogic/c/727d01cb17c8a8e593ace9d136cb382a2c0d9e94 - [v2,4/4] arm64: dts: meson: add libretech-pc boards support https://git.kernel.org/khilman/linux-amlogic/c/865a0d06f870ea1ffccdb2b2d0acf7e2a0deb9a3
You are awesome, thank you!
Signature · 7 lines
Deet-doot-dot, I am a bot. https://korg.wiki.kernel.org/userdoc/pwbot _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic