dt-bindings: arm: Remove leftover axentia.txt
Rob Herring
maintainerPATCH 1/1 dt-bindings: arm: Remove leftover axentia.txt
The bindings described in axentia.txt are already covered by atmel-at91.yaml, so remove the file.
--- .../devicetree/bindings/arm/axentia.txt | 28 ------------------- MAINTAINERS | 1 - 2 files changed, 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/axentia.txt
Documentation/devicetree/bindings/arm/axentia.txt deleted +0 -28
@@ -1,28 +0,0 @@ -Device tree bindings for Axentia ARM devices -============================================ - -Linea CPU module ----------------- - -Required root node properties: -compatible = "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -and following the rules from atmel-at91.txt for a sama5d31 SoC. - - -Nattis v2 board with Natte v2 power board ------------------------------------------ - -Required root node properties: -compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -and following the rules from above for the axentia,linea CPU module. - - -TSE-850 v3 board ----------------- - -Required root node properties: -compatible = "axentia,tse850v3", "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -and following the rules from above for the axentia,linea CPU module.
MAINTAINERS +0 -1
@@ -2859,7 +2859,6 @@ AXENTIA ARM DEVICES M: Peter Rosin <[email protected]> L: [email protected] (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/arm/axentia.txt F: arch/arm/boot/dts/at91-linea.dtsi F: arch/arm/boot/dts/at91-natte.dtsi F: arch/arm/boot/dts/at91-nattis-2-natte-2.dts
Signature · 1 line
2.20.1
Quoted 8 lines · Rob Herring
The bindings described in axentia.txt are already covered by
atmel-at91.yaml, so remove the file.Cc Peter Rosin <[email protected]>Cc Nicolas Ferre <[email protected]>Cc Alexandre Belloni <[email protected]>Cc Ludovic Desroches <[email protected]>Signed-off-by Rob Herring <[email protected]>
Quoted 55 lines
--- .../devicetree/bindings/arm/axentia.txt | 28 ------------------- MAINTAINERS | 1 - 2 files changed, 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/axentia.txtDocumentation/devicetree/bindings/arm/axentia.txt deleted +0
-28@@ -1,28 +0,0 @@ -Device tree bindings for Axentia ARM devices -============================================ - -Linea CPU module ----------------- - -Required root node properties: -compatible = "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -and following the rules from atmel-at91.txt for a sama5d31 SoC. - - -Nattis v2 board with Natte v2 power board ------------------------------------------ - -Required root node properties: -compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -and following the rules from above for the axentia,linea CPU module. - - -TSE-850 v3 board ----------------- - -Required root node properties: -compatible = "axentia,tse850v3", "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -and following the rules from above for the axentia,linea CPU module.MAINTAINERS +0
-1@@ -2859,7 +2859,6 @@ AXENTIA ARM DEVICES M: Peter Rosin <[email protected]> L: [email protected] (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/arm/axentia.txt F: arch/arm/boot/dts/at91-linea.dtsi F: arch/arm/boot/dts/at91-natte.dtsi F: arch/arm/boot/dts/at91-nattis-2-natte-2.dtsSignature · 1 line
2.20.1
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Peter Rosin
Acked-byQuoted 10 lines · Alexandre Belloni
Quoted 8 lines · Rob Herring
The bindings described in axentia.txt are already covered by
atmel-at91.yaml, so remove the file.Cc Peter Rosin <[email protected]>Cc Nicolas Ferre <[email protected]>Cc Alexandre Belloni <[email protected]>Cc Ludovic Desroches <[email protected]>Signed-off-by Rob Herring <[email protected]>
Right, this one fell of out of my memory due to overload. Sorry.
Cheers,
Peter
Quoted 57 lines
Quoted 56 lines
--- .../devicetree/bindings/arm/axentia.txt | 28 ------------------- MAINTAINERS | 1 - 2 files changed, 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/axentia.txtDocumentation/devicetree/bindings/arm/axentia.txt deleted +0
-28@@ -1,28 +0,0 @@ -Device tree bindings for Axentia ARM devices -============================================ - -Linea CPU module ----------------- - -Required root node properties: -compatible = "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -and following the rules from atmel-at91.txt for a sama5d31 SoC. - - -Nattis v2 board with Natte v2 power board ------------------------------------------ - -Required root node properties: -compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -and following the rules from above for the axentia,linea CPU module. - - -TSE-850 v3 board ----------------- - -Required root node properties: -compatible = "axentia,tse850v3", "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; -and following the rules from above for the axentia,linea CPU module.MAINTAINERS +0
-1@@ -2859,7 +2859,6 @@ AXENTIA ARM DEVICES M: Peter Rosin <[email protected]> L: [email protected] (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/arm/axentia.txt F: arch/arm/boot/dts/at91-linea.dtsi F: arch/arm/boot/dts/at91-natte.dtsi F: arch/arm/boot/dts/at91-nattis-2-natte-2.dtsSignature · 1 line
2.20.1
Quoted 10 lines · Peter Rosin
Quoted 9 lines · Alexandre Belloni
Quoted 8 lines · Rob Herring
The bindings described in axentia.txt are already covered by
atmel-at91.yaml, so remove the file.Cc Peter Rosin <[email protected]>Cc Nicolas Ferre <[email protected]>Cc Alexandre Belloni <[email protected]>Cc Ludovic Desroches <[email protected]>Signed-off-by Rob Herring <[email protected]>
Quoted 6 lines
Quoted 1 line
Right, this one fell of out of my memory due to overload. Sorry.
Acked-by Peter Rosin <[email protected]>
Rob, I assume you are going to apply it in your tree. If you want that to go through arm-soc, tell me, I can apply it too.
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Rob Herring
maintainerQuoted 14 lines · Alexandre Belloni
Quoted 12 lines · Peter Rosin
Quoted 10 lines · Alexandre Belloni
Quoted 8 lines · Rob Herring
The bindings described in axentia.txt are already covered by
atmel-at91.yaml, so remove the file.Cc Peter Rosin <[email protected]>Cc Nicolas Ferre <[email protected]>Cc Alexandre Belloni <[email protected]>Cc Ludovic Desroches <[email protected]>Signed-off-by Rob Herring <[email protected]>
Quoted 7 lines
Quoted 4 lines
Right, this one fell of out of my memory due to overload. Sorry.
Acked-by Peter Rosin <[email protected]>Rob, I assume you are going to apply it in your tree. If you want that to go through arm-soc, tell me, I can apply it too.
It's already in v5.5-rc1.
Rob