QorIQ TMU multi-sensor and HWMON support
v8 cover QorIQ TMU multi-sensor and HWMON support
Everyone:
This series contains patches adding support for HWMON integration, bug fixes and general improvements (hopefully) for TMU driver I made while working on it on i.MX8MQ.
Feedback is welcome!
Thanks,
Andrey Smirnov
Changes since [v7]:
- Rebased on top of 12/05 linux-next
Changes since [v6]:
- Rebased on top of Zhang's "next" branch
- Added "thermal: qoriq: Drop unnecessary drvdata cleanup"
Changes since [v5]
- Rebased on recent linux-next, dropped "thermal: qoriq: Remove unnecessary DT node is NULL check" since it is already in the tree
- Dropped dependency on [rfc]
Changes since [v4]
- Collected Tested-by from Lucas
- Collected Reviewed-by from Daniel
- Converted "thermal: qoriq: Enable all sensors before registering them" to use if instead of switch statement for error checking
Changes since [v3]
- Series reabse on top of [rfc]
- Fixed incorrect goto label in "thermal: qoriq: Pass data to qoriq_tmu_calibration()"
- Added REGS_TRITSR() register description to "thermal: qoriq: Do not report invalid temperature reading"
- Reworded commit message of "thermal: qoriq: Remove unnecessary DT node is NULL check"
Changes since [v2]
- Patches rebased on v5.1-rc1
Changes since [v1]
- Rebased on "linus" branch of git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git that included latest chagnes adding multi-sensors support
- Dropped
thermal: qoriq: Add support for multiple thremal sites
thermal: qoriq: Be more strict when parsing
thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id()
since they are no longer relevant
- Added
thermal: qoriq: Don't store struct thermal_zone_device reference
thermal: qoriq: Add local struct qoriq_sensor pointer
thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
to simplify latest codebase
- Changed "thermal: qoriq: Do not report invalid temperature reading" to use regmap_read_poll_timeout() to make sure that tmu_get_temp() waits for fist sample to be ready before reporting it. This case is triggered on my setup if qoriq_thermal is compiled as a module
[v1] lore.kernel.org/lkml/[email protected] [v2] lore.kernel.org/lkml/[email protected] [v3] lore.kernel.org/lkml/[email protected] [v4] lore.kernel.org/lkml/[email protected] [v5] lore.kernel.org/lkml/[email protected] [v6] lore.kernel.org/lkml/[email protected] [v7] lore.kernel.org/lkml/[email protected] [rfc] lore.kernel.org/lkml/[email protected]
Andrey Smirnov (12):
thermal: qoriq: Add local struct device pointer
thermal: qoriq: Don't store struct thermal_zone_device reference
thermal: qoriq: Add local struct qoriq_sensor pointer
thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
thermal: qoriq: Pass data to qoriq_tmu_calibration() directly
thermal: qoriq: Drop unnecessary drvdata cleanup
thermal: qoriq: Convert driver to use regmap API
thermal: qoriq: Enable all sensors before registering them
thermal: qoriq: Do not report invalid temperature reading
thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
thermal: qoriq: Add hwmon support
drivers/thermal/qoriq_thermal.c | 336 +++++++++++++++----------------- drivers/thermal/thermal_hwmon.c | 28 +++ drivers/thermal/thermal_hwmon.h | 7 + 3 files changed, 195 insertions(+), 176 deletions(-)
Signature · 1 line
2.21.0
PATCH v8 1/12 thermal: qoriq: Add local struct device pointer
Use a local "struct device *dev" for brevity. No functional change intended.
--- drivers/thermal/qoriq_thermal.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/thermal/qoriq_thermal.c +6 -5
@@ -262,8 +262,9 @@ static int qoriq_tmu_probe(struct platform_device *pdev)u32 ver;struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node; +struct device *dev = &pdev->dev; - data =devm_kzalloc (&pdev->dev,sizeof (struct qoriq_tmu_data ), + data =devm_kzalloc (dev,sizeof (struct qoriq_tmu_data ),GFP_KERNEL );if (!data)return -ENOMEM ;
@@ -274,17 +275,17 @@ static int qoriq_tmu_probe(struct platform_device *pdev) data->regs =devm_platform_ioremap_resource (pdev,0 );if (IS_ERR (data->regs)) { -dev_err (&pdev->dev,"Failed to get memory region\n" ); +dev_err (dev,"Failed to get memory region\n" );return PTR_ERR (data->regs); } - data->clk =devm_clk_get_optional (&pdev->dev,NULL ); + data->clk =devm_clk_get_optional (dev,NULL );if (IS_ERR (data->clk))return PTR_ERR (data->clk); ret =clk_prepare_enable (data->clk);if (ret) { -dev_err (&pdev->dev,"Failed to enable clock\n" ); +dev_err (dev,"Failed to enable clock\n" );return ret; }
@@ -302,7 +303,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev) ret =qoriq_tmu_register_tmu_zone (pdev);if (ret <0 ) { -dev_err (&pdev->dev,"Failed to register sensors\n" ); +dev_err (dev,"Failed to register sensors\n" ); ret = -ENODEV ; goto err; }
Signature · 1 line
2.21.0
PATCH v8 2/12 thermal: qoriq: Don't store struct thermal_zone_device reference
In reply to Andrey SmirnovStruct thermal_zone_device reference stored as sensor's private data isn't really used anywhere in the code. Drop it.
--- drivers/thermal/qoriq_thermal.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
drivers/thermal/qoriq_thermal.c +11 -6
@@ -110,7 +110,6 @@ struct qoriq_tmu_data;* Thermal zone data */ struct qoriq_sensor { -struct thermal_zone_device *tzd;struct qoriq_tmu_data *qdata;int id; };
@@ -162,6 +161,9 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)int id, sites =0 ;for (id =0 ; id <SITES_MAX ; id++) { +struct thermal_zone_device *tzd; +int ret; + qdata->sensor[id] =devm_kzalloc (&pdev->dev,sizeof (struct qoriq_sensor ),GFP_KERNEL );if (!qdata->sensor[id])
@@ -169,13 +171,16 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev) qdata->sensor[id]->id = id; qdata->sensor[id]->qdata = qdata; - qdata->sensor[id]->tzd =devm_thermal_zone_of_sensor_register ( - &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops); -if (IS_ERR (qdata->sensor[id]->tzd)) { -if (PTR_ERR (qdata->sensor[id]->tzd) == -ENODEV ) + + tzd =devm_thermal_zone_of_sensor_register (&pdev->dev, id, + qdata->sensor[id], + &tmu_tz_ops); + ret =PTR_ERR_OR_ZERO (tzd); +if (ret) { +if (ret == -ENODEV )continue ;else -return PTR_ERR (qdata->sensor[id]->tzd); +return ret; }if (qdata->ver ==TMU_VER1 )
Signature · 1 line
2.21.0
PATCH v8 3/12 thermal: qoriq: Add local struct qoriq_sensor pointer
In reply to Andrey SmirnovAdd local struct qoriq_sensor pointer in qoriq_tmu_register_tmu_zone() for brevity.
--- drivers/thermal/qoriq_thermal.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
drivers/thermal/qoriq_thermal.c +9 -5
@@ -162,18 +162,22 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)for (id =0 ; id <SITES_MAX ; id++) {struct thermal_zone_device *tzd; +struct qoriq_sensor *sensor;int ret; - qdata->sensor[id] =devm_kzalloc (&pdev->dev, -sizeof (struct qoriq_sensor ),GFP_KERNEL ); + sensor =devm_kzalloc (&pdev->dev, +sizeof (struct qoriq_sensor ), +GFP_KERNEL );if (!qdata->sensor[id])return -ENOMEM ; - qdata->sensor[id]->id = id; - qdata->sensor[id]->qdata = qdata; + qdata->sensor[id] = sensor; + + sensor->id = id; + sensor->qdata = qdata; tzd =devm_thermal_zone_of_sensor_register (&pdev->dev, id, - qdata->sensor[id], + sensor, &tmu_tz_ops); ret =PTR_ERR_OR_ZERO (tzd);if (ret) {
Signature · 1 line
2.21.0
PATCH v8 4/12 thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
In reply to Andrey SmirnovEmbed per-sensor data into struct qoriq_tmu_data so we can drop the code allocating it. This also allows us to get rid of per-sensor back reference to struct qoriq_tmu_data since now its address can be calculated using container_of().
--- drivers/thermal/qoriq_thermal.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-)
drivers/thermal/qoriq_thermal.c +8 -15
@@ -104,13 +104,10 @@ struct qoriq_tmu_regs_v2 {u32 ttrcr[4 ];/* Temperature Range Control Register */ }; -struct qoriq_tmu_data ; -/* * Thermal zone data */ struct qoriq_sensor { -struct qoriq_tmu_data *qdata;int id; };
@@ -120,9 +117,14 @@ struct qoriq_tmu_data {struct qoriq_tmu_regs_v2 __iomem *regs_v2;struct clk *clk;bool little_endian; -struct qoriq_sensor *sensor[SITES_MAX ]; +struct qoriq_sensor sensor[SITES_MAX ]; }; +static struct qoriq_tmu_data *qoriq_sensor_to_data (struct qoriq_sensor *s) +{ + return container_of(s, struct qoriq_tmu_data, sensor[s->id]); +} +static void tmu_write (struct qoriq_tmu_data *p,u32 val,void __iomem *addr) {if (p->little_endian)
@@ -142,7 +144,7 @@ static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)static int tmu_get_temp (void *p,int *temp) {struct qoriq_sensor *qsensor = p; -struct qoriq_tmu_data *qdata = qsensor->qdata; +struct qoriq_tmu_data *qdata =qoriq_sensor_to_data (qsensor);u32 val; val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr);
@@ -162,19 +164,10 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)for (id =0 ; id <SITES_MAX ; id++) {struct thermal_zone_device *tzd; -struct qoriq_sensor *sensor; +struct qoriq_sensor *sensor = &qdata->sensor[id];int ret; - sensor =devm_kzalloc (&pdev->dev, -sizeof (struct qoriq_sensor ), -GFP_KERNEL ); -if (!qdata->sensor[id]) -return -ENOMEM ; - - qdata->sensor[id] = sensor; - sensor->id = id; - sensor->qdata = qdata; tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id, sensor,
Signature · 1 line
2.21.0
PATCH v8 5/12 thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
In reply to Andrey SmirnovPass all necessary data to qoriq_tmu_register_tmu_zone() directly instead of passing a platform device and then deriving it. This is done as a first step to simplify resource deallocation code.
--- drivers/thermal/qoriq_thermal.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/thermal/qoriq_thermal.c +4 -4
@@ -157,9 +157,9 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = { .get_temp = tmu_get_temp, }; -static int qoriq_tmu_register_tmu_zone (struct platform_device *pdev) +static int qoriq_tmu_register_tmu_zone (struct device *dev, +struct qoriq_tmu_data *qdata) { -struct qoriq_tmu_data *qdata =platform_get_drvdata (pdev);int id, sites =0 ;for (id =0 ; id <SITES_MAX ; id++) {
@@ -169,7 +169,7 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev) sensor->id = id; - tzd =devm_thermal_zone_of_sensor_register (&pdev->dev, id, + tzd =devm_thermal_zone_of_sensor_register (dev, id, sensor, &tmu_tz_ops); ret =PTR_ERR_OR_ZERO (tzd);
@@ -303,7 +303,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev)if (ret <0 ) goto err; - ret =qoriq_tmu_register_tmu_zone (pdev); + ret =qoriq_tmu_register_tmu_zone (dev, data);if (ret <0 ) {dev_err (dev,"Failed to register sensors\n" ); ret = -ENODEV ;
Signature · 1 line
2.21.0
PATCH v8 6/12 thermal: qoriq: Pass data to qoriq_tmu_calibration() directly
In reply to Andrey SmirnovWe can simplify error cleanup code if instead of passing a "struct platform_device *" to qoriq_tmu_calibration() and deriving a bunch of pointers from it, we pass those pointers directly. This way we won't be force to call platform_set_drvdata() as early in qoriq_tmu_probe() and need to have "platform_set_drvdata(pdev, NULL);" in error path.
--- drivers/thermal/qoriq_thermal.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)
drivers/thermal/qoriq_thermal.c +9 -10
@@ -201,23 +201,23 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,return 0 ; } -static int qoriq_tmu_calibration (struct platform_device *pdev) +static int qoriq_tmu_calibration (struct device *dev, +struct qoriq_tmu_data *data) {int i, val, len;u32 range[4 ];const u32 *calibration; -struct device_node *np = pdev->dev.of_node; -struct qoriq_tmu_data *data =platform_get_drvdata (pdev); +struct device_node *np = dev->of_node; len =of_property_count_u32_elems (np,"fsl,tmu-range" );if (len <0 || len >4 ) { -dev_err (&pdev->dev,"invalid range data.\n" ); +dev_err (dev,"invalid range data.\n" );return len; } val =of_property_read_u32_array (np,"fsl,tmu-range" , range, len);if (val !=0 ) { -dev_err (&pdev->dev,"failed to read range data.\n" ); +dev_err (dev,"failed to read range data.\n" );return val; }
@@ -227,7 +227,7 @@ static int qoriq_tmu_calibration(struct platform_device *pdev) calibration =of_get_property (np,"fsl,tmu-calibration" , &len);if (calibration ==NULL || len %8 ) { -dev_err (&pdev->dev,"invalid calibration data.\n" ); +dev_err (dev,"invalid calibration data.\n" );return -ENODEV ; }
@@ -271,8 +271,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev)if (!data)return -ENOMEM ; -platform_set_drvdata (pdev, data); - data->little_endian =of_property_read_bool (np,"little-endian" ); data->regs =devm_platform_ioremap_resource (pdev,0 );
@@ -299,7 +297,7 @@ static int qoriq_tmu_probe(struct platform_device *pdev)qoriq_tmu_init_device (data);/* TMU initialization */ - ret =qoriq_tmu_calibration (pdev);/* TMU calibration */ + ret =qoriq_tmu_calibration (dev, data);/* TMU calibration */ if (ret <0 ) goto err;
@@ -310,11 +308,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev) goto err; } +platform_set_drvdata (pdev, data); +return 0 ; err:clk_disable_unprepare (data->clk); -platform_set_drvdata (pdev,NULL );return ret; }
Signature · 1 line
2.21.0
PATCH v8 7/12 thermal: qoriq: Drop unnecessary drvdata cleanup
In reply to Andrey SmirnovDriver data of underlying struct device will be set to NULL by Linux's driver infrastructure. Clearing it here is unnecessary.
--- drivers/thermal/qoriq_thermal.c | 2 -- 1 file changed, 2 deletions(-)
drivers/thermal/qoriq_thermal.c +0 -2
@@ -327,8 +327,6 @@ static int qoriq_tmu_remove(struct platform_device *pdev)clk_disable_unprepare (data->clk); -platform_set_drvdata (pdev,NULL ); -return 0 ; }
Signature · 1 line
2.21.0
PATCH v8 8/12 thermal: qoriq: Convert driver to use regmap API
In reply to Andrey SmirnovConvert driver to use regmap API, drop custom LE/BE IO helpers and simplify bit manipulation using regmap_update_bits(). This also allows us to convert some register initialization to use loops and adds convenient debug access to TMU registers via debugfs.
---
Yuantian, Anson:
I don't have access to Layerscape HW that has v2 register layout, so if you could give this patch a try and verify that I got the 'qoriq_yes_ranges' right, I'd really appreciate it.
Thanks,
Andrey Smirnov
drivers/thermal/qoriq_thermal.c | 228 ++++++++++++++------------------ 1 file changed, 98 insertions(+), 130 deletions(-)
drivers/thermal/qoriq_thermal.c +98 -130
@@ -9,6 +9,7 @@#include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/thermal.h> #include "thermal_core.h"
@@ -24,85 +25,35 @@#define TMU_VER1 0x1#define TMU_VER2 0x2 -/* -* QorIQ TMU Registers -*/ -struct qoriq_tmu_site_regs { -u32 tritsr;/* Immediate Temperature Site Register */ -u32 tratsr;/* Average Temperature Site Register */ -u8 res0[0x8 ]; -}; +#define REGS_TMR 0x000/* Mode Register */ +#define TMR_DISABLE 0x0 +#define TMR_ME 0x80000000 +#define TMR_ALPF 0x0c000000 -struct qoriq_tmu_regs_v1 { -u32 tmr;/* Mode Register */ -u32 tsr;/* Status Register */ -u32 tmtmir;/* Temperature measurement interval Register */ -u8 res0[0x14 ]; -u32 tier;/* Interrupt Enable Register */ -u32 tidr;/* Interrupt Detect Register */ -u32 tiscr;/* Interrupt Site Capture Register */ -u32 ticscr;/* Interrupt Critical Site Capture Register */ -u8 res1[0x10 ]; -u32 tmhtcrh;/* High Temperature Capture Register */ -u32 tmhtcrl;/* Low Temperature Capture Register */ -u8 res2[0x8 ]; -u32 tmhtitr;/* High Temperature Immediate Threshold */ -u32 tmhtatr;/* High Temperature Average Threshold */ -u32 tmhtactr;/* High Temperature Average Crit Threshold */ -u8 res3[0x24 ]; -u32 ttcfgr;/* Temperature Configuration Register */ -u32 tscfgr;/* Sensor Configuration Register */ -u8 res4[0x78 ]; -struct qoriq_tmu_site_regs site[SITES_MAX ]; -u8 res5[0x9f8 ]; -u32 ipbrr0;/* IP Block Revision Register 0 */ -u32 ipbrr1;/* IP Block Revision Register 1 */ -u8 res6[0x310 ]; -u32 ttrcr[4 ];/* Temperature Range Control Register */ -}; +#define REGS_TMTMIR 0x008/* Temperature measurement interval Register */ +#define TMTMIR_DEFAULT 0x0000000f -struct qoriq_tmu_regs_v2 { -u32 tmr;/* Mode Register */ -u32 tsr;/* Status Register */ -u32 tmsr;/* monitor site register */ -u32 tmtmir;/* Temperature measurement interval Register */ -u8 res0[0x10 ]; -u32 tier;/* Interrupt Enable Register */ -u32 tidr;/* Interrupt Detect Register */ -u8 res1[0x8 ]; -u32 tiiscr;/* interrupt immediate site capture register */ -u32 tiascr;/* interrupt average site capture register */ -u32 ticscr;/* Interrupt Critical Site Capture Register */ -u32 res2; -u32 tmhtcr;/* monitor high temperature capture register */ -u32 tmltcr;/* monitor low temperature capture register */ -u32 tmrtrcr;/* monitor rising temperature rate capture register */ -u32 tmftrcr;/* monitor falling temperature rate capture register */ -u32 tmhtitr;/* High Temperature Immediate Threshold */ -u32 tmhtatr;/* High Temperature Average Threshold */ -u32 tmhtactr;/* High Temperature Average Crit Threshold */ -u32 res3; -u32 tmltitr;/* monitor low temperature immediate threshold */ -u32 tmltatr;/* monitor low temperature average threshold register */ -u32 tmltactr;/* monitor low temperature average critical threshold */ -u32 res4; -u32 tmrtrctr;/* monitor rising temperature rate critical threshold */ -u32 tmftrctr;/* monitor falling temperature rate critical threshold*/ -u8 res5[0x8 ]; -u32 ttcfgr;/* Temperature Configuration Register */ -u32 tscfgr;/* Sensor Configuration Register */ -u8 res6[0x78 ]; -struct qoriq_tmu_site_regs site[SITES_MAX ]; -u8 res7[0x9f8 ]; -u32 ipbrr0;/* IP Block Revision Register 0 */ -u32 ipbrr1;/* IP Block Revision Register 1 */ -u8 res8[0x300 ]; -u32 teumr0; -u32 teumr1; -u32 teumr2; -u32 res9; -u32 ttrcr[4 ];/* Temperature Range Control Register */ -}; +#define REGS_V2_TMSR 0x008/* monitor site register */ + +#define REGS_V2_TMTMIR 0x00c/* Temperature measurement interval Register */ + +#define REGS_TIER 0x020/* Interrupt Enable Register */ +#define TIER_DISABLE 0x0 + + +#define REGS_TTCFGR 0x080/* Temperature Configuration Register */ +#define REGS_TSCFGR 0x084/* Sensor Configuration Register */ + +#define REGS_TRITSR (n) (0x100 + 16 * (n))/* Immediate Temperature +* Site Register +*/ +#define REGS_TTRnCR (n) (0xf10 + 4 * (n))/* Temperature Range n +* Control Register +*/ +#define REGS_IPBRR (n) (0xbf8 + 4 * (n))/* IP Block Revision +* Register n +*/ +#define REGS_V2_TEUMR (n) (0xf00 + 4 * (n))/* * Thermal zone data
@@ -113,10 +64,8 @@ struct qoriq_sensor {struct qoriq_tmu_data {int ver; -struct qoriq_tmu_regs_v1 __iomem *regs; -struct qoriq_tmu_regs_v2 __iomem *regs_v2; +struct regmap *regmap;struct clk *clk; -bool little_endian;struct qoriq_sensor sensor[SITES_MAX ]; };
@@ -125,29 +74,13 @@ static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s) return container_of(s, struct qoriq_tmu_data, sensor[s->id]); } -static void tmu_write (struct qoriq_tmu_data *p,u32 val,void __iomem *addr) -{ -if (p->little_endian) -iowrite32 (val, addr); -else -iowrite32be (val, addr); -} - -static u32 tmu_read (struct qoriq_tmu_data *p,void __iomem *addr) -{ -if (p->little_endian) -return ioread32 (addr); -else -return ioread32be (addr); -} -static int tmu_get_temp (void *p,int *temp) {struct qoriq_sensor *qsensor = p;struct qoriq_tmu_data *qdata =qoriq_sensor_to_data (qsensor);u32 val; - val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); +regmap_read (qdata->regmap,REGS_TRITSR (qsensor->id), &val); *temp = (val &0xff ) *1000 ;return 0 ;
@@ -189,12 +122,12 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,/* Enable monitoring */ if (sites !=0 ) {if (qdata->ver ==TMU_VER1 ) { -tmu_write (qdata, sites |TMR_ME |TMR_ALPF , - &qdata->regs->tmr); +regmap_write (qdata->regmap,REGS_TMR , + sites |TMR_ME |TMR_ALPF ); }else { -tmu_write (qdata, sites, &qdata->regs_v2->tmsr); -tmu_write (qdata,TMR_ME |TMR_ALPF_V2 , - &qdata->regs_v2->tmr); +regmap_write (qdata->regmap,REGS_V2_TMSR , sites); +regmap_write (qdata->regmap,REGS_TMR , +TMR_ME |TMR_ALPF_V2 ); } }
@@ -223,7 +156,7 @@ static int qoriq_tmu_calibration(struct device *dev,/* Init temperature range registers */ for (i =0 ; i < len; i++) -tmu_write (data, range[i], &data->regs->ttrcr[i]); +regmap_write (data->regmap,REGS_TTRnCR (i), range[i]); calibration =of_get_property (np,"fsl,tmu-calibration" , &len);if (calibration ==NULL || len %8 ) {
@@ -233,9 +166,9 @@ static int qoriq_tmu_calibration(struct device *dev,for (i =0 ; i < len; i +=8 , calibration +=2 ) { val =of_read_number (calibration,1 ); -tmu_write (data, val, &data->regs->ttcfgr); +regmap_write (data->regmap,REGS_TTCFGR , val); val =of_read_number (calibration +1 ,1 ); -tmu_write (data, val, &data->regs->tscfgr); +regmap_write (data->regmap,REGS_TSCFGR , val); }return 0 ;
@@ -244,20 +177,40 @@ static int qoriq_tmu_calibration(struct device *dev,static void qoriq_tmu_init_device (struct qoriq_tmu_data *data) {/* Disable interrupt, using polling instead */ -tmu_write (data,TIER_DISABLE , &data->regs->tier); +regmap_write (data->regmap,REGS_TIER ,TIER_DISABLE );/* Set update_interval */ +if (data->ver ==TMU_VER1 ) { -tmu_write (data,TMTMIR_DEFAULT , &data->regs->tmtmir); +regmap_write (data->regmap,REGS_TMTMIR ,TMTMIR_DEFAULT ); }else { -tmu_write (data,TMTMIR_DEFAULT , &data->regs_v2->tmtmir); -tmu_write (data,TEUMR0_V2 , &data->regs_v2->teumr0); +regmap_write (data->regmap,REGS_V2_TMTMIR ,TMTMIR_DEFAULT ); +regmap_write (data->regmap,REGS_V2_TEUMR (0 ),TEUMR0_V2 ); }/* Disable monitoring */ -tmu_write (data,TMR_DISABLE , &data->regs->tmr); +regmap_write (data->regmap,REGS_TMR ,TMR_DISABLE ); } +static const struct regmap_range qoriq_yes_ranges[] = { +regmap_reg_range (REGS_TMR ,REGS_TSCFGR ), +regmap_reg_range (REGS_TTRnCR (0 ),REGS_TTRnCR (3 )), +regmap_reg_range (REGS_V2_TEUMR (0 ),REGS_V2_TEUMR (2 )), +regmap_reg_range (REGS_IPBRR (0 ),REGS_IPBRR (1 )), +/* Read only registers below */ +regmap_reg_range (REGS_TRITSR (0 ),REGS_TRITSR (15 )), +}; + +static const struct regmap_access_table qoriq_wr_table = { + .yes_ranges = qoriq_yes_ranges, + .n_yes_ranges =ARRAY_SIZE (qoriq_yes_ranges) -1 , +}; + +static const struct regmap_access_table qoriq_rd_table = { + .yes_ranges = qoriq_yes_ranges, + .n_yes_ranges =ARRAY_SIZE (qoriq_yes_ranges), +}; +static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;
@@ -265,18 +218,37 @@ static int qoriq_tmu_probe(struct platform_device *pdev)struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node;struct device *dev = &pdev->dev; +const bool little_endian =of_property_read_bool (np,"little-endian" ); +const enum regmap_endian format_endian = + little_endian ?REGMAP_ENDIAN_LITTLE :REGMAP_ENDIAN_BIG ; +const struct regmap_config regmap_config = { + .reg_bits =32 , + .val_bits =32 , + .reg_stride =4 , + .rd_table = &qoriq_rd_table, + .wr_table = &qoriq_wr_table, + .val_format_endian = format_endian, + .max_register =SZ_4K , + }; +void __iomem *base; data =devm_kzalloc (dev,sizeof (struct qoriq_tmu_data ),GFP_KERNEL );if (!data)return -ENOMEM ; - data->little_endian =of_property_read_bool (np,"little-endian" ); - - data->regs =devm_platform_ioremap_resource (pdev,0 ); -if (IS_ERR (data->regs)) { + base =devm_platform_ioremap_resource (pdev,0 ); + ret =PTR_ERR_OR_ZERO (base); +if (ret) {dev_err (dev,"Failed to get memory region\n" ); -return PTR_ERR (data->regs); +return ret; + } + + data->regmap =devm_regmap_init_mmio (dev, base, ®map_config); + ret =PTR_ERR_OR_ZERO (data->regmap); +if (ret) { +dev_err (dev,"Failed to init regmap (%d)\n" , ret); +return ret; } data->clk =devm_clk_get_optional (dev,NULL );
@@ -290,10 +262,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev) }/* version register offset at: 0xbf8 on both v1 and v2 */ - ver =tmu_read (data, &data->regs->ipbrr0); + ret =regmap_read (data->regmap,REGS_IPBRR (0 ), &ver); +if (ret) { +dev_err (&pdev->dev,"Failed to read IP block version\n" ); +return ret; + } data->ver = (ver >>8 ) &0xff ; -if (data->ver ==TMU_VER2 ) - data->regs_v2 = (void __iomem *)data->regs;qoriq_tmu_init_device (data);/* TMU initialization */
@@ -323,7 +297,7 @@ static int qoriq_tmu_remove(struct platform_device *pdev)struct qoriq_tmu_data *data =platform_get_drvdata (pdev);/* Disable monitoring */ -tmu_write (data,TMR_DISABLE , &data->regs->tmr); +regmap_write (data->regmap,REGS_TMR ,TMR_DISABLE );clk_disable_unprepare (data->clk);
@@ -332,13 +306,12 @@ static int qoriq_tmu_remove(struct platform_device *pdev)static int __maybe_unused qoriq_tmu_suspend (struct device *dev) { -u32 tmr;struct qoriq_tmu_data *data =dev_get_drvdata (dev); +int ret; -/* Disable monitoring */ - tmr =tmu_read (data, &data->regs->tmr); - tmr &= ~TMR_ME ; -tmu_write (data, tmr, &data->regs->tmr); + ret =regmap_update_bits (data->regmap,REGS_TMR ,TMR_ME ,0 ); +if (ret) +return ret;clk_disable_unprepare (data->clk);
@@ -347,7 +320,6 @@ static int __maybe_unused qoriq_tmu_suspend(struct device *dev)static int __maybe_unused qoriq_tmu_resume (struct device *dev) { -u32 tmr;int ret;struct qoriq_tmu_data *data =dev_get_drvdata (dev);
@@ -356,11 +328,7 @@ static int __maybe_unused qoriq_tmu_resume(struct device *dev)return ret;/* Enable monitoring */ - tmr =tmu_read (data, &data->regs->tmr); - tmr |=TMR_ME ; -tmu_write (data, tmr, &data->regs->tmr); - -return 0 ; +return regmap_update_bits (data->regmap,REGS_TMR ,TMR_ME ,TMR_ME ); } static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
Signature · 1 line
2.21.0
RE: [EXT] [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap API
Hi Andrew,
I failed to apply your patch. Could you please rebase it to the latest code and send me the patch directly?
BR,
Andy
Quoted 443 lines
-----Original Message-----
From: Andrey Smirnov <[email protected]>
Sent: 2019年12月11日 0:42
To: Daniel Lezcano <[email protected]>
Cc: Andrey Smirnov <[email protected]>; Andy Tang <[email protected]>; Anson Huang <[email protected]>; Lucas Stach <[email protected]>; Chris Healy <[email protected]>; Eduardo Valentin <[email protected]>; Angus Ainslie <[email protected]>; dl-linux-imx <[email protected]>; [email protected]; [email protected]
Subject: [EXT] [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap APICaution: EXT Email
Convert driver to use regmap API, drop custom LE/BE IO helpers and simplify bit manipulation using
regmap_update_bits(). This also allows us to convert some register initialization to use loops and adds convenient debug access to TMU registers via debugfs.Signed-off-by Andrey Smirnov <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>Tested-by Lucas Stach <[email protected]>Cc Chris Healy <[email protected]>Cc Lucas Stach <[email protected]>Cc Eduardo Valentin <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Angus Ainslie (Purism) <[email protected]>---
Yuantian, Anson:
I don't have access to Layerscape HW that has v2 register layout, so if you could give this patch a try and verify that I got the '
qoriq_yes_ranges' right, I'd really appreciate it.Thanks,
Andrey Smirnovdrivers/thermal/qoriq_thermal.c | 228 ++++++++++++++------------------ 1 file changed, 98 insertions(+), 130 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex11749c673b3b..6227c940b9b0100644drivers/thermal/qoriq_thermal.c +5
-12@@ -9,6 +9,7 @@#include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/thermal.h> #include "thermal_core.h" @@ -24,85 +25,35 @@#define TMU_VER1 0x1 #define TMU_VER2 0x2 -/* -* QorIQ TMU Registers -*/ -struct qoriq_tmu_site_regs { -u32 tritsr;/* Immediate Temperature Site Register */ -u32 tratsr;/* Average Temperature Site Register */ -u8 res0[0x8 ]; -}; +#define REGS_TMR 0x000/* Mode Register */ +#define TMR_DISABLE 0x0 +#define TMR_ME 0x80000000 +#define TMR_ALPF 0x0c000000 -struct qoriq_tmu_regs_v1 { -u32 tmr;/* Mode Register */ -u32 tsr;/* Status Register */ -u32 tmtmir;/* Temperature measurement interval Register */
drivers/thermal/qoriq_thermal.c +0
-5-u8 res0[0x14 ]; -u32 tier;/* Interrupt Enable Register */ -u32 tidr;/* Interrupt Detect Register */ -u32 tiscr;/* Interrupt Site Capture Register */ -u32 ticscr;/* Interrupt Critical Site Capture Register */
drivers/thermal/qoriq_thermal.c +0
-2-u8 res1[0x10 ]; -u32 tmhtcrh;/* High Temperature Capture Register */
drivers/thermal/qoriq_thermal.c +0
-3-u32 tmhtcrl;/* Low Temperature Capture Register */ -u8 res2[0x8 ]; -u32 tmhtitr;/* High Temperature Immediate Threshold */
- u32 tmhtatr; /* High Temperature Average Threshold
*/drivers/thermal/qoriq_thermal.c +0
-3-u32 tmhtactr;/* High Temperature Average Crit Threshold */ -u8 res3[0x24 ]; -u32 ttcfgr;/* Temperature Configuration Register */
drivers/thermal/qoriq_thermal.c +1
-9-u32 tscfgr;/* Sensor Configuration Register */ -u8 res4[0x78 ]; -struct qoriq_tmu_site_regs site[SITES_MAX ]; -u8 res5[0x9f8 ]; -u32 ipbrr0;/* IP Block Revision Register 0 */ -u32 ipbrr1;/* IP Block Revision Register 1 */ -u8 res6[0x310 ]; -u32 ttrcr[4 ];/* Temperature Range Control Register */ -}; +#define REGS_TMTMIR 0x008/* Temperature measurement interval Register */
drivers/thermal/qoriq_thermal.c +1
-5+#define TMTMIR_DEFAULT 0x0000000f -struct qoriq_tmu_regs_v2 { -u32 tmr;/* Mode Register */ -u32 tsr;/* Status Register */ -u32 tmsr;/* monitor site register */ -u32 tmtmir;/* Temperature measurement interval Register */
drivers/thermal/qoriq_thermal.c +0
-5-u8 res0[0x10 ]; -u32 tier;/* Interrupt Enable Register */ -u32 tidr;/* Interrupt Detect Register */ -u8 res1[0x8 ]; -u32 tiiscr;/* interrupt immediate site capture register */
- u32 tiascr; /* interrupt average site capture register
*/
- u32 ticscr; /* Interrupt Critical Site Capture Register
*/drivers/thermal/qoriq_thermal.c +0
-2-u32 res2; -u32 tmhtcr;/* monitor high temperature capture register */
- u32 tmltcr; /* monitor low temperature capture
register */
- u32 tmrtrcr; /* monitor rising temperature rate capture
register */
- u32 tmftrcr; /* monitor falling temperature rate capture
register */drivers/thermal/qoriq_thermal.c +0
-5-u32 tmhtitr;/* High Temperature Immediate Threshold */ -u32 tmhtatr;/* High Temperature Average Threshold */ -u32 tmhtactr;/* High Temperature Average Crit Threshold */ -u32 res3; -u32 tmltitr;/* monitor low temperature immediate threshold */
- u32 tmltatr; /* monitor low temperature average threshold
register */
- u32 tmltactr; /* monitor low temperature average critical
threshold */drivers/thermal/qoriq_thermal.c +0
-2-u32 res4; -u32 tmrtrctr;/* monitor rising temperature rate critical threshold */
- u32 tmftrctr; /* monitor falling temperature rate critical
threshold*/drivers/thermal/qoriq_thermal.c +3
-15-u8 res5[0x8 ]; -u32 ttcfgr;/* Temperature Configuration Register */ -u32 tscfgr;/* Sensor Configuration Register */ -u8 res6[0x78 ]; -struct qoriq_tmu_site_regs site[SITES_MAX ]; -u8 res7[0x9f8 ]; -u32 ipbrr0;/* IP Block Revision Register 0 */ -u32 ipbrr1;/* IP Block Revision Register 1 */ -u8 res8[0x300 ]; -u32 teumr0; -u32 teumr1; -u32 teumr2; -u32 res9; -u32 ttrcr[4 ];/* Temperature Range Control Register */ -}; +#define REGS_V2_TMSR 0x008/* monitor site register */ + +#define REGS_V2_TMTMIR 0x00c/* Temperature measurement interval Register */
drivers/thermal/qoriq_thermal.c +6
-0+ +#define REGS_TIER 0x020/* Interrupt Enable Register */ +#define TIER_DISABLE 0x0 + + +#define REGS_TTCFGR 0x080/* Temperature Configuration Register */
drivers/thermal/qoriq_thermal.c +5
-0+#define REGS_TSCFGR 0x084/* Sensor Configuration Register */ + +#define REGS_TRITSR(n) (0x100 + 16 * (n)) /* Immediate Temperature + * Site Register + */ #define
REGS_TTRnCR(n)drivers/thermal/qoriq_thermal.c +14
-23+(0xf10 +4 * (n))/* Temperature Range n +* Control Register + */ +#define REGS_IPBRR (n) (0xbf8 + 4 * (n))/* IP Block Revision +* Register n +*/ +#define REGS_V2_TEUMR (n) (0xf00 + 4 * (n))/* * Thermal zone data @@ -113,10 +64,8 @@ struct qoriq_sensor {struct qoriq_tmu_data {int ver; -struct qoriq_tmu_regs_v1 __iomem *regs; -struct qoriq_tmu_regs_v2 __iomem *regs_v2; +struct regmap *regmap;struct clk *clk; -bool little_endian;struct qoriq_sensor sensor[SITES_MAX ]; };@@ -125,29 +74,13 @@ static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s) return container_of(s, struct qoriq_tmu_data, sensor[s->id]); } -static void tmu_write (struct qoriq_tmu_data *p,u32 val,void __iomem *addr) -{ -if (p->little_endian) -iowrite32 (val, addr); -else -iowrite32be (val, addr); -} - -static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) -{ -if (p->little_endian) -return ioread32 (addr); -else -return ioread32be (addr); -} -static int tmu_get_temp (void *p,int *temp) {struct qoriq_sensor *qsensor = p;struct qoriq_tmu_data *qdata =qoriq_sensor_to_data (qsensor);u32 val; - val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); +regmap_read (qdata->regmap,REGS_TRITSR (qsensor->id), &val); *temp = (val &0xff ) *1000 ;return 0 ;@@ -189,12 +122,12 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,/* Enable monitoring */ if (sites != 0) {if (qdata->ver ==TMU_VER1 ) { -tmu_write (qdata, sites |TMR_ME |TMR_ALPF , - &qdata->regs->tmr); +regmap_write (qdata->regmap,REGS_TMR , + sites |TMR_ME |TMR_ALPF ); }else { -tmu_write (qdata, sites, &qdata->regs_v2->tmsr); -tmu_write (qdata,TMR_ME |TMR_ALPF_V2 , - &qdata->regs_v2->tmr); +regmap_write (qdata->regmap,REGS_V2_TMSR , sites); +regmap_write (qdata->regmap,REGS_TMR , +TMR_ME |TMR_ALPF_V2 );} }drivers/thermal/qoriq_thermal.c +1
-1@@ -223,7 +156,7 @@ static int qoriq_tmu_calibration(struct device *dev,/* Init temperature range registers */ for (i =0 ; i < len; i++) -tmu_write (data, range[i], &data->regs->ttrcr[i]); +regmap_write (data->regmap,REGS_TTRnCR (i), range[i]); calibration =of_get_property (np,"fsl,tmu-calibration" , &len); if (calibration == NULL || len % 8) { @@ -233,9 +166,9 @@ staticint qoriq_tmu_calibration(struct device *dev,
for (i = 0; i < len; i += 8, calibration += 2) { val = of_read_number(calibration, 1);drivers/thermal/qoriq_thermal.c +46
-12-tmu_write (data, val, &data->regs->ttcfgr); +regmap_write (data->regmap,REGS_TTCFGR , val); val =of_read_number (calibration +1 ,1 ); -tmu_write (data, val, &data->regs->tscfgr); +regmap_write (data->regmap,REGS_TSCFGR , val); }return 0 ;@@ -244,20 +177,40 @@ static int qoriq_tmu_calibration(struct device *dev,static void qoriq_tmu_init_device (struct qoriq_tmu_data *data) {/* Disable interrupt, using polling instead */ -tmu_write (data,TIER_DISABLE , &data->regs->tier); +regmap_write (data->regmap,REGS_TIER ,TIER_DISABLE );/* Set update_interval */ +if (data->ver ==TMU_VER1 ) { -tmu_write (data,TMTMIR_DEFAULT , &data->regs->tmtmir); +regmap_write (data->regmap,REGS_TMTMIR ,TMTMIR_DEFAULT ); }else { -tmu_write (data,TMTMIR_DEFAULT , &data->regs_v2->tmtmir); -tmu_write (data,TEUMR0_V2 , &data->regs_v2->teumr0); +regmap_write (data->regmap,REGS_V2_TMTMIR ,TMTMIR_DEFAULT ); +regmap_write (data->regmap,REGS_V2_TEUMR (0 ),TEUMR0_V2 ); }/* Disable monitoring */ -tmu_write (data,TMR_DISABLE , &data->regs->tmr); +regmap_write (data->regmap,REGS_TMR ,TMR_DISABLE ); } +static const struct regmap_range qoriq_yes_ranges[] = { +regmap_reg_range (REGS_TMR ,REGS_TSCFGR ), +regmap_reg_range (REGS_TTRnCR (0 ),REGS_TTRnCR (3 )), +regmap_reg_range (REGS_V2_TEUMR (0 ),REGS_V2_TEUMR (2 )), +regmap_reg_range (REGS_IPBRR (0 ),REGS_IPBRR (1 )), +/* Read only registers below */ +regmap_reg_range (REGS_TRITSR (0 ),REGS_TRITSR (15 )), }; + +static const struct regmap_access_table qoriq_wr_table = { + .yes_ranges = qoriq_yes_ranges, + .n_yes_ranges =ARRAY_SIZE (qoriq_yes_ranges) -1 , +}; + +static const struct regmap_access_table qoriq_rd_table = { + .yes_ranges = qoriq_yes_ranges, + .n_yes_ranges =ARRAY_SIZE (qoriq_yes_ranges), +}; +static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;@@ -265,18 +218,37 @@ static int qoriq_tmu_probe(struct platform_device *pdev)struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node;struct device *dev = &pdev->dev; +const bool little_endian =of_property_read_bool (np,"little-endian" ); +const enum regmap_endian format_endian = + little_endian ?REGMAP_ENDIAN_LITTLE :REGMAP_ENDIAN_BIG ; +const struct regmap_config regmap_config = { + .reg_bits =32 , + .val_bits =32 , + .reg_stride =4 , + .rd_table = &qoriq_rd_table, + .wr_table = &qoriq_wr_table, + .val_format_endian = format_endian, + .max_register =SZ_4K , + }; +void __iomem *base; data =devm_kzalloc (dev,sizeof (struct qoriq_tmu_data ),GFP_KERNEL );if (!data)return -ENOMEM ; - data->little_endian =of_property_read_bool (np,"little-endian" ); - - data->regs =devm_platform_ioremap_resource (pdev,0 ); -if (IS_ERR (data->regs)) { + base =devm_platform_ioremap_resource (pdev,0 ); + ret =PTR_ERR_OR_ZERO (base); +if (ret) {dev_err (dev,"Failed to get memory region\n" ); -return PTR_ERR (data->regs); +return ret; + } + + data->regmap = devm_regmap_init_mmio(dev, base,
®map_config);drivers/thermal/qoriq_thermal.c +17
-16+ ret =PTR_ERR_OR_ZERO (data->regmap); +if (ret) { +dev_err (dev,"Failed to init regmap (%d)\n" , ret); +return ret; } data->clk = devm_clk_get_optional(dev, NULL); @@ -290,10 +262,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev) }/* version register offset at: 0xbf8 on both v1 and v2 */ - ver =tmu_read (data, &data->regs->ipbrr0); + ret =regmap_read (data->regmap,REGS_IPBRR (0 ), &ver); +if (ret) { +dev_err (&pdev->dev,"Failed to read IP block version\n" ); +return ret; + } data->ver = (ver >>8 ) &0xff ; -if (data->ver ==TMU_VER2 ) - data->regs_v2 = (void __iomem *)data->regs;qoriq_tmu_init_device (data);/* TMU initialization */ @@ -323,7 +297,7 @@ static int qoriq_tmu_remove(struct platform_device *pdev)struct qoriq_tmu_data *data =platform_get_drvdata (pdev);/* Disable monitoring */ -tmu_write (data,TMR_DISABLE , &data->regs->tmr); +regmap_write (data->regmap,REGS_TMR ,TMR_DISABLE );clk_disable_unprepare (data->clk);@@ -332,13 +306,12 @@ static int qoriq_tmu_remove(struct platform_device *pdev)static int __maybe_unused qoriq_tmu_suspend (struct device *dev) { -u32 tmr;struct qoriq_tmu_data *data =dev_get_drvdata (dev); +int ret; -/* Disable monitoring */ - tmr =tmu_read (data, &data->regs->tmr); - tmr &= ~TMR_ME ; -tmu_write (data, tmr, &data->regs->tmr); + ret =regmap_update_bits (data->regmap,REGS_TMR ,TMR_ME ,0 ); +if (ret) +return ret;clk_disable_unprepare (data->clk);@@ -347,7 +320,6 @@ static int __maybe_unused qoriq_tmu_suspend(struct device *dev) static int __maybe_unused qoriq_tmu_resume(struct device *dev) { -u32 tmr;int ret;struct qoriq_tmu_data *data =dev_get_drvdata (dev);@@ -356,11 +328,7 @@ static int __maybe_unused qoriq_tmu_resume(struct device *dev) return ret;/* Enable monitoring */ - tmr =tmu_read (data, &data->regs->tmr); - tmr |=TMR_ME ; -tmu_write (data, tmr, &data->regs->tmr); - -return 0 ; +return regmap_update_bits (data->regmap,REGS_TMR ,TMR_ME , +TMR_ME ); } static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, --2.21.0
Re: [EXT] [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap API
Quoted 3 lines · Andy Tang
Hi Andrew,
I failed to apply your patch. Could you please rebase it to the latest code and send me the patch directly?
Hi Andy,
I'm taking care of the series.
Thanks
-- Daniel
Quoted 444 lines
Quoted 443 lines
-----Original Message-----
From: Andrey Smirnov <[email protected]>
Sent: 2019年12月11日 0:42
To: Daniel Lezcano <[email protected]>
Cc: Andrey Smirnov <[email protected]>; Andy Tang <[email protected]>; Anson Huang <[email protected]>; Lucas Stach <[email protected]>; Chris Healy <[email protected]>; Eduardo Valentin <[email protected]>; Angus Ainslie <[email protected]>; dl-linux-imx <[email protected]>; [email protected]; [email protected]
Subject: [EXT] [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap APICaution: EXT Email
Convert driver to use regmap API, drop custom LE/BE IO helpers and simplify bit manipulation using
regmap_update_bits(). This also allows us to convert some register initialization to use loops and adds convenient debug access to TMU registers via debugfs.Signed-off-by Andrey Smirnov <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>Tested-by Lucas Stach <[email protected]>Cc Chris Healy <[email protected]>Cc Lucas Stach <[email protected]>Cc Eduardo Valentin <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Angus Ainslie (Purism) <[email protected]>---
Yuantian, Anson:
I don't have access to Layerscape HW that has v2 register layout, so if you could give this patch a try and verify that I got the '
qoriq_yes_ranges' right, I'd really appreciate it.Thanks,
Andrey Smirnovdrivers/thermal/qoriq_thermal.c | 228 ++++++++++++++------------------ 1 file changed, 98 insertions(+), 130 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex11749c673b3b..6227c940b9b0100644drivers/thermal/qoriq_thermal.c +5
-12@@ -9,6 +9,7 @@#include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/thermal.h> #include "thermal_core.h" @@ -24,85 +25,35 @@#define TMU_VER1 0x1 #define TMU_VER2 0x2 -/* -* QorIQ TMU Registers -*/ -struct qoriq_tmu_site_regs { -u32 tritsr;/* Immediate Temperature Site Register */ -u32 tratsr;/* Average Temperature Site Register */ -u8 res0[0x8 ]; -}; +#define REGS_TMR 0x000/* Mode Register */ +#define TMR_DISABLE 0x0 +#define TMR_ME 0x80000000 +#define TMR_ALPF 0x0c000000 -struct qoriq_tmu_regs_v1 { -u32 tmr;/* Mode Register */ -u32 tsr;/* Status Register */ -u32 tmtmir;/* Temperature measurement interval Register */
drivers/thermal/qoriq_thermal.c +0
-5-u8 res0[0x14 ]; -u32 tier;/* Interrupt Enable Register */ -u32 tidr;/* Interrupt Detect Register */ -u32 tiscr;/* Interrupt Site Capture Register */ -u32 ticscr;/* Interrupt Critical Site Capture Register */
drivers/thermal/qoriq_thermal.c +0
-2-u8 res1[0x10 ]; -u32 tmhtcrh;/* High Temperature Capture Register */
drivers/thermal/qoriq_thermal.c +0
-3-u32 tmhtcrl;/* Low Temperature Capture Register */ -u8 res2[0x8 ]; -u32 tmhtitr;/* High Temperature Immediate Threshold */
- u32 tmhtatr; /* High Temperature Average Threshold
*/drivers/thermal/qoriq_thermal.c +0
-3-u32 tmhtactr;/* High Temperature Average Crit Threshold */ -u8 res3[0x24 ]; -u32 ttcfgr;/* Temperature Configuration Register */
drivers/thermal/qoriq_thermal.c +1
-9-u32 tscfgr;/* Sensor Configuration Register */ -u8 res4[0x78 ]; -struct qoriq_tmu_site_regs site[SITES_MAX ]; -u8 res5[0x9f8 ]; -u32 ipbrr0;/* IP Block Revision Register 0 */ -u32 ipbrr1;/* IP Block Revision Register 1 */ -u8 res6[0x310 ]; -u32 ttrcr[4 ];/* Temperature Range Control Register */ -}; +#define REGS_TMTMIR 0x008/* Temperature measurement interval Register */
drivers/thermal/qoriq_thermal.c +1
-5+#define TMTMIR_DEFAULT 0x0000000f -struct qoriq_tmu_regs_v2 { -u32 tmr;/* Mode Register */ -u32 tsr;/* Status Register */ -u32 tmsr;/* monitor site register */ -u32 tmtmir;/* Temperature measurement interval Register */
drivers/thermal/qoriq_thermal.c +0
-5-u8 res0[0x10 ]; -u32 tier;/* Interrupt Enable Register */ -u32 tidr;/* Interrupt Detect Register */ -u8 res1[0x8 ]; -u32 tiiscr;/* interrupt immediate site capture register */
- u32 tiascr; /* interrupt average site capture register
*/
- u32 ticscr; /* Interrupt Critical Site Capture Register
*/drivers/thermal/qoriq_thermal.c +0
-2-u32 res2; -u32 tmhtcr;/* monitor high temperature capture register */
- u32 tmltcr; /* monitor low temperature capture
register */
- u32 tmrtrcr; /* monitor rising temperature rate capture
register */
- u32 tmftrcr; /* monitor falling temperature rate capture
register */drivers/thermal/qoriq_thermal.c +0
-5-u32 tmhtitr;/* High Temperature Immediate Threshold */ -u32 tmhtatr;/* High Temperature Average Threshold */ -u32 tmhtactr;/* High Temperature Average Crit Threshold */ -u32 res3; -u32 tmltitr;/* monitor low temperature immediate threshold */
- u32 tmltatr; /* monitor low temperature average threshold
register */
- u32 tmltactr; /* monitor low temperature average critical
threshold */drivers/thermal/qoriq_thermal.c +0
-2-u32 res4; -u32 tmrtrctr;/* monitor rising temperature rate critical threshold */
- u32 tmftrctr; /* monitor falling temperature rate critical
threshold*/drivers/thermal/qoriq_thermal.c +3
-15-u8 res5[0x8 ]; -u32 ttcfgr;/* Temperature Configuration Register */ -u32 tscfgr;/* Sensor Configuration Register */ -u8 res6[0x78 ]; -struct qoriq_tmu_site_regs site[SITES_MAX ]; -u8 res7[0x9f8 ]; -u32 ipbrr0;/* IP Block Revision Register 0 */ -u32 ipbrr1;/* IP Block Revision Register 1 */ -u8 res8[0x300 ]; -u32 teumr0; -u32 teumr1; -u32 teumr2; -u32 res9; -u32 ttrcr[4 ];/* Temperature Range Control Register */ -}; +#define REGS_V2_TMSR 0x008/* monitor site register */ + +#define REGS_V2_TMTMIR 0x00c/* Temperature measurement interval Register */
drivers/thermal/qoriq_thermal.c +6
-0+ +#define REGS_TIER 0x020/* Interrupt Enable Register */ +#define TIER_DISABLE 0x0 + + +#define REGS_TTCFGR 0x080/* Temperature Configuration Register */
drivers/thermal/qoriq_thermal.c +5
-0+#define REGS_TSCFGR 0x084/* Sensor Configuration Register */ + +#define REGS_TRITSR(n) (0x100 + 16 * (n)) /* Immediate Temperature + * Site Register + */ #define
REGS_TTRnCR(n)drivers/thermal/qoriq_thermal.c +14
-23+(0xf10 +4 * (n))/* Temperature Range n +* Control Register + */ +#define REGS_IPBRR (n) (0xbf8 + 4 * (n))/* IP Block Revision +* Register n +*/ +#define REGS_V2_TEUMR (n) (0xf00 + 4 * (n))/* * Thermal zone data @@ -113,10 +64,8 @@ struct qoriq_sensor {struct qoriq_tmu_data {int ver; -struct qoriq_tmu_regs_v1 __iomem *regs; -struct qoriq_tmu_regs_v2 __iomem *regs_v2; +struct regmap *regmap;struct clk *clk; -bool little_endian;struct qoriq_sensor sensor[SITES_MAX ]; };@@ -125,29 +74,13 @@ static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s) return container_of(s, struct qoriq_tmu_data, sensor[s->id]); } -static void tmu_write (struct qoriq_tmu_data *p,u32 val,void __iomem *addr) -{ -if (p->little_endian) -iowrite32 (val, addr); -else -iowrite32be (val, addr); -} - -static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) -{ -if (p->little_endian) -return ioread32 (addr); -else -return ioread32be (addr); -} -static int tmu_get_temp (void *p,int *temp) {struct qoriq_sensor *qsensor = p;struct qoriq_tmu_data *qdata =qoriq_sensor_to_data (qsensor);u32 val; - val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); +regmap_read (qdata->regmap,REGS_TRITSR (qsensor->id), &val); *temp = (val &0xff ) *1000 ;return 0 ;@@ -189,12 +122,12 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,/* Enable monitoring */ if (sites != 0) {if (qdata->ver ==TMU_VER1 ) { -tmu_write (qdata, sites |TMR_ME |TMR_ALPF , - &qdata->regs->tmr); +regmap_write (qdata->regmap,REGS_TMR , + sites |TMR_ME |TMR_ALPF ); }else { -tmu_write (qdata, sites, &qdata->regs_v2->tmsr); -tmu_write (qdata,TMR_ME |TMR_ALPF_V2 , - &qdata->regs_v2->tmr); +regmap_write (qdata->regmap,REGS_V2_TMSR , sites); +regmap_write (qdata->regmap,REGS_TMR , +TMR_ME |TMR_ALPF_V2 );} }drivers/thermal/qoriq_thermal.c +1
-1@@ -223,7 +156,7 @@ static int qoriq_tmu_calibration(struct device *dev,/* Init temperature range registers */ for (i =0 ; i < len; i++) -tmu_write (data, range[i], &data->regs->ttrcr[i]); +regmap_write (data->regmap,REGS_TTRnCR (i), range[i]); calibration =of_get_property (np,"fsl,tmu-calibration" , &len); if (calibration == NULL || len % 8) { @@ -233,9 +166,9 @@ staticint qoriq_tmu_calibration(struct device *dev,
for (i = 0; i < len; i += 8, calibration += 2) { val = of_read_number(calibration, 1);drivers/thermal/qoriq_thermal.c +46
-12-tmu_write (data, val, &data->regs->ttcfgr); +regmap_write (data->regmap,REGS_TTCFGR , val); val =of_read_number (calibration +1 ,1 ); -tmu_write (data, val, &data->regs->tscfgr); +regmap_write (data->regmap,REGS_TSCFGR , val); }return 0 ;@@ -244,20 +177,40 @@ static int qoriq_tmu_calibration(struct device *dev,static void qoriq_tmu_init_device (struct qoriq_tmu_data *data) {/* Disable interrupt, using polling instead */ -tmu_write (data,TIER_DISABLE , &data->regs->tier); +regmap_write (data->regmap,REGS_TIER ,TIER_DISABLE );/* Set update_interval */ +if (data->ver ==TMU_VER1 ) { -tmu_write (data,TMTMIR_DEFAULT , &data->regs->tmtmir); +regmap_write (data->regmap,REGS_TMTMIR ,TMTMIR_DEFAULT ); }else { -tmu_write (data,TMTMIR_DEFAULT , &data->regs_v2->tmtmir); -tmu_write (data,TEUMR0_V2 , &data->regs_v2->teumr0); +regmap_write (data->regmap,REGS_V2_TMTMIR ,TMTMIR_DEFAULT ); +regmap_write (data->regmap,REGS_V2_TEUMR (0 ),TEUMR0_V2 ); }/* Disable monitoring */ -tmu_write (data,TMR_DISABLE , &data->regs->tmr); +regmap_write (data->regmap,REGS_TMR ,TMR_DISABLE ); } +static const struct regmap_range qoriq_yes_ranges[] = { +regmap_reg_range (REGS_TMR ,REGS_TSCFGR ), +regmap_reg_range (REGS_TTRnCR (0 ),REGS_TTRnCR (3 )), +regmap_reg_range (REGS_V2_TEUMR (0 ),REGS_V2_TEUMR (2 )), +regmap_reg_range (REGS_IPBRR (0 ),REGS_IPBRR (1 )), +/* Read only registers below */ +regmap_reg_range (REGS_TRITSR (0 ),REGS_TRITSR (15 )), }; + +static const struct regmap_access_table qoriq_wr_table = { + .yes_ranges = qoriq_yes_ranges, + .n_yes_ranges =ARRAY_SIZE (qoriq_yes_ranges) -1 , +}; + +static const struct regmap_access_table qoriq_rd_table = { + .yes_ranges = qoriq_yes_ranges, + .n_yes_ranges =ARRAY_SIZE (qoriq_yes_ranges), +}; +static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;@@ -265,18 +218,37 @@ static int qoriq_tmu_probe(struct platform_device *pdev)struct qoriq_tmu_data *data;struct device_node *np = pdev->dev.of_node;struct device *dev = &pdev->dev; +const bool little_endian =of_property_read_bool (np,"little-endian" ); +const enum regmap_endian format_endian = + little_endian ?REGMAP_ENDIAN_LITTLE :REGMAP_ENDIAN_BIG ; +const struct regmap_config regmap_config = { + .reg_bits =32 , + .val_bits =32 , + .reg_stride =4 , + .rd_table = &qoriq_rd_table, + .wr_table = &qoriq_wr_table, + .val_format_endian = format_endian, + .max_register =SZ_4K , + }; +void __iomem *base; data =devm_kzalloc (dev,sizeof (struct qoriq_tmu_data ),GFP_KERNEL );if (!data)return -ENOMEM ; - data->little_endian =of_property_read_bool (np,"little-endian" ); - - data->regs =devm_platform_ioremap_resource (pdev,0 ); -if (IS_ERR (data->regs)) { + base =devm_platform_ioremap_resource (pdev,0 ); + ret =PTR_ERR_OR_ZERO (base); +if (ret) {dev_err (dev,"Failed to get memory region\n" ); -return PTR_ERR (data->regs); +return ret; + } + + data->regmap = devm_regmap_init_mmio(dev, base,
®map_config);drivers/thermal/qoriq_thermal.c +17
-16+ ret =PTR_ERR_OR_ZERO (data->regmap); +if (ret) { +dev_err (dev,"Failed to init regmap (%d)\n" , ret); +return ret; } data->clk = devm_clk_get_optional(dev, NULL); @@ -290,10 +262,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev) }/* version register offset at: 0xbf8 on both v1 and v2 */ - ver =tmu_read (data, &data->regs->ipbrr0); + ret =regmap_read (data->regmap,REGS_IPBRR (0 ), &ver); +if (ret) { +dev_err (&pdev->dev,"Failed to read IP block version\n" ); +return ret; + } data->ver = (ver >>8 ) &0xff ; -if (data->ver ==TMU_VER2 ) - data->regs_v2 = (void __iomem *)data->regs;qoriq_tmu_init_device (data);/* TMU initialization */ @@ -323,7 +297,7 @@ static int qoriq_tmu_remove(struct platform_device *pdev)struct qoriq_tmu_data *data =platform_get_drvdata (pdev);/* Disable monitoring */ -tmu_write (data,TMR_DISABLE , &data->regs->tmr); +regmap_write (data->regmap,REGS_TMR ,TMR_DISABLE );clk_disable_unprepare (data->clk);@@ -332,13 +306,12 @@ static int qoriq_tmu_remove(struct platform_device *pdev)static int __maybe_unused qoriq_tmu_suspend (struct device *dev) { -u32 tmr;struct qoriq_tmu_data *data =dev_get_drvdata (dev); +int ret; -/* Disable monitoring */ - tmr =tmu_read (data, &data->regs->tmr); - tmr &= ~TMR_ME ; -tmu_write (data, tmr, &data->regs->tmr); + ret =regmap_update_bits (data->regmap,REGS_TMR ,TMR_ME ,0 ); +if (ret) +return ret;clk_disable_unprepare (data->clk);@@ -347,7 +320,6 @@ static int __maybe_unused qoriq_tmu_suspend(struct device *dev) static int __maybe_unused qoriq_tmu_resume(struct device *dev) { -u32 tmr;int ret;struct qoriq_tmu_data *data =dev_get_drvdata (dev);@@ -356,11 +328,7 @@ static int __maybe_unused qoriq_tmu_resume(struct device *dev) return ret;/* Enable monitoring */ - tmr =tmu_read (data, &data->regs->tmr); - tmr |=TMR_ME ; -tmu_write (data, tmr, &data->regs->tmr); - -return 0 ; +return regmap_update_bits (data->regmap,REGS_TMR ,TMR_ME , +TMR_ME ); } static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, --2.21.0
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
RE: [EXT] [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap API
Quoted 16 lines
-----Original Message-----
From: Daniel Lezcano <[email protected]>
Sent: 2019年12月13日 15:48
To: Andy Tang <[email protected]>; Andrey Smirnov <[email protected]>
Cc: Anson Huang <[email protected]>; Lucas Stach <[email protected]>; Chris Healy <[email protected]>; Eduardo Valentin <[email protected]>; Angus Ainslie <[email protected]>; dl-linux-imx <[email protected]>; [email protected]; [email protected]
Subject: Re: [EXT] [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap APICaution: EXT Email
On 13/12/2019 07:16, Andy Tang wrote:
Quoted 8 lines
Quoted 3 lines
Hi Andrew,
I failed to apply your patch. Could you please rebase it to the latest code
and send me the patch directly?
Hi Andy,
I'm taking care of the series.
Thanks, I just want to verify it on the board since the author can't access the tmu v2 module.
BR,
Andy
Quoted 510 lines
Thanks
-- Daniel
Quoted 6 lines
Quoted 6 lines
-----Original Message-----
From: Andrey Smirnov <[email protected]>
Sent: 2019年12月11日 0:42
To: Daniel Lezcano <[email protected]>
Cc: Andrey Smirnov <[email protected]>; Andy Tang <[email protected]>; Anson Huang <[email protected]>; LucasStach
Quoted 57 lines
Quoted 57 lines
<[email protected]>; Chris Healy <[email protected]>; Eduardo Valentin <[email protected]>; Angus Ainslie <[email protected]>; dl-linux-imx <[email protected]>; [email protected]; [email protected]
Subject: [EXT] [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap APICaution: EXT Email
Convert driver to use regmap API, drop custom LE/BE IO helpers and simplify bit manipulation using
regmap_update_bits(). This also allows us to convert some register initialization to use loops and adds convenient debug access to TMU registers via debugfs.Signed-off-by Andrey Smirnov <[email protected]>Reviewed-by Daniel Lezcano <[email protected]>Tested-by Lucas Stach <[email protected]>Cc Chris Healy <[email protected]>Cc Lucas Stach <[email protected]>Cc Eduardo Valentin <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Angus Ainslie (Purism) <[email protected]>---
Yuantian, Anson:
I don't have access to Layerscape HW that has v2 register layout, so if you could give this patch a try and verify that I got the '
qoriq_yes_ranges' right, I'd really appreciate it.Thanks,
Andrey Smirnovdrivers/thermal/qoriq_thermal.c | 228 ++++++++++++++------------------ 1 file changed, 98 insertions(+), 130 deletions(-)(quoted diff) +0
-0
b/drivers/thermal/qoriq_thermal.cindex11749c673b3b..6227c940b9b0100644drivers/thermal/qoriq_thermal.c +1
-0@@ -9,6 +9,7 @@#include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/thermal.h> #include "thermal_core.h" @@ -24,85 +25,35 @@#define TMU_VER1 0x1#define TMU_VER2 0x2Quoted 5 lines
drivers/thermal/qoriq_thermal.c
Quoted 5 lines
drivers/thermal/qoriq_thermal.c +0
-5-/* -* QorIQ TMU Registers -*/ -struct qoriq_tmu_site_regs { -u32 tritsr;/* Immediate Temperature Site Register
Quoted 2 lines
drivers/thermal/qoriq_thermal.c line 33
Quoted 2 lines
drivers/thermal/qoriq_thermal.c +0
-1*/ -u32 tratsr;/* Average Temperature Site Register */
Quoted 11 lines
drivers/thermal/qoriq_thermal.c
Quoted 11 lines
drivers/thermal/qoriq_thermal.c +4
-6-u8 res0[0x8 ]; -}; +#define REGS_TMR 0x000/* Mode Register */ +#define TMR_DISABLE 0x0 +#define TMR_ME 0x80000000 +#define TMR_ALPF 0x0c000000 -struct qoriq_tmu_regs_v1 { -u32 tmr;/* Mode Register */ -u32 tsr;/* Status Register */ -u32 tmtmir;/* Temperature measurement interval
Quoted 6 lines
drivers/thermal/qoriq_thermal.c
Quoted 6 lines
Register */
drivers/thermal/qoriq_thermal.c +0
-5-u8 res0[0x14 ]; -u32 tier;/* Interrupt Enable Register */ -u32 tidr;/* Interrupt Detect Register */ -u32 tiscr;/* Interrupt Site Capture Register */ -u32 ticscr;/* Interrupt Critical Site Capture Register
Quoted 3 lines
drivers/thermal/qoriq_thermal.c
Quoted 3 lines
*/
drivers/thermal/qoriq_thermal.c +0
-2-u8 res1[0x10 ]; -u32 tmhtcrh;/* High Temperature Capture Register
Quoted 2 lines
Quoted 2 lines
*/
- u32 tmhtcrl; /* Low Temperature CaptureRegister */
Quoted 4 lines
Quoted 4 lines
drivers/thermal/qoriq_thermal.c +0
-2-u8 res2[0x8 ]; -u32 tmhtitr;/* High Temperature Immediate Threshold */
- u32 tmhtatr; /* High Temperature AverageThreshold
Quoted 4 lines
drivers/thermal/qoriq_thermal.c
Quoted 4 lines
*/
drivers/thermal/qoriq_thermal.c +0
-3-u32 tmhtactr;/* High Temperature Average Crit Threshold */ -u8 res3[0x24 ]; -u32 ttcfgr;/* Temperature Configuration Register
Quoted 9 lines
drivers/thermal/qoriq_thermal.c
Quoted 9 lines
*/
drivers/thermal/qoriq_thermal.c +0
-8-u32 tscfgr;/* Sensor Configuration Register */ -u8 res4[0x78 ]; -struct qoriq_tmu_site_regs site[SITES_MAX ]; -u8 res5[0x9f8 ]; -u32 ipbrr0;/* IP Block Revision Register 0 */ -u32 ipbrr1;/* IP Block Revision Register 1 */ -u8 res6[0x310 ]; -u32 ttrcr[4 ];/* Temperature Range Control Register */
Quoted 10 lines
drivers/thermal/qoriq_thermal.c
Quoted 10 lines
drivers/thermal/qoriq_thermal.c +1
-1-}; +#define REGS_TMTMIR 0x008/* Temperature measurement interval Register */
drivers/thermal/qoriq_thermal.c +1
-5+#define TMTMIR_DEFAULT 0x0000000f -struct qoriq_tmu_regs_v2 { -u32 tmr;/* Mode Register */ -u32 tsr;/* Status Register */ -u32 tmsr;/* monitor site register */ -u32 tmtmir;/* Temperature measurement interval
Quoted 8 lines
Quoted 8 lines
Register */
drivers/thermal/qoriq_thermal.c +0
-5-u8 res0[0x10 ]; -u32 tier;/* Interrupt Enable Register */ -u32 tidr;/* Interrupt Detect Register */ -u8 res1[0x8 ]; -u32 tiiscr;/* interrupt immediate site capture register */
- u32 tiascr; /* interrupt average site captureregister
Quoted 2 lines
Quoted 2 lines
*/
- u32 ticscr; /* Interrupt Critical Site CaptureRegister
Quoted 7 lines
Quoted 7 lines
*/
drivers/thermal/qoriq_thermal.c +0
-2-u32 res2; -u32 tmhtcr;/* monitor high temperature capture register */
- u32 tmltcr; /* monitor low temperature capture
register */
- u32 tmrtrcr; /* monitor rising temperature rate captureQuoted 8 lines
drivers/thermal/qoriq_thermal.c
Quoted 8 lines
register */
- u32 tmftrcr; /* monitor falling temperature rate capture
register */drivers/thermal/qoriq_thermal.c +0
-5-u32 tmhtitr;/* High Temperature Immediate Threshold */ -u32 tmhtatr;/* High Temperature Average Threshold */ -u32 tmhtactr;/* High Temperature Average Crit Threshold */ -u32 res3; -u32 tmltitr;/* monitor low temperature immediate threshold
Quoted 20 lines
Quoted 20 lines
*/
- u32 tmltatr; /* monitor low temperature average threshold
register */
- u32 tmltactr; /* monitor low temperature average critical
threshold */drivers/thermal/qoriq_thermal.c +0
-2-u32 res4; -u32 tmrtrctr;/* monitor rising temperature rate critical threshold */
- u32 tmftrctr; /* monitor falling temperature rate critical
threshold*/drivers/thermal/qoriq_thermal.c +0
-10-u8 res5[0x8 ]; -u32 ttcfgr;/* Temperature Configuration Register */ -u32 tscfgr;/* Sensor Configuration Register */ -u8 res6[0x78 ]; -struct qoriq_tmu_site_regs site[SITES_MAX ]; -u8 res7[0x9f8 ]; -u32 ipbrr0;/* IP Block Revision Register 0 */ -u32 ipbrr1;/* IP Block Revision Register 1 */ -u8 res8[0x300 ]; -u32 teumr0;Quoted 8 lines
drivers/thermal/qoriq_thermal.c
Quoted 8 lines
drivers/thermal/qoriq_thermal.c +3
-5-u32 teumr1; -u32 teumr2; -u32 res9; -u32 ttrcr[4 ];/* Temperature Range Control Register */ -}; +#define REGS_V2_TMSR 0x008/* monitor site register */ + +#define REGS_V2_TMTMIR 0x00c/* Temperature measurement interval
Quoted 7 lines
drivers/thermal/qoriq_thermal.c
Quoted 7 lines
Register */
drivers/thermal/qoriq_thermal.c +6
-0+ +#define REGS_TIER 0x020/* Interrupt Enable Register */ +#define TIER_DISABLE 0x0 + + +#define REGS_TTCFGR 0x080/* Temperature Configuration Register
Quoted 4 lines
Quoted 4 lines
*/
drivers/thermal/qoriq_thermal.c +3
-0+#define REGS_TSCFGR 0x084/* Sensor Configuration Register */ + +#define REGS_TRITSR (n) (0x100 + 16 * (n))/* Immediate Temperature Quoted 8 lines
drivers/thermal/qoriq_thermal.c
Quoted 8 lines
drivers/thermal/qoriq_thermal.c +2
-0+* Site Register + */ #define
REGS_TTRnCR(n)drivers/thermal/qoriq_thermal.c +5
-0+(0xf10 +4 * (n))/* Temperature Range n +* Control Register + */ +#define REGS_IPBRR (n) (0xbf8 + 4 * (n))/* IP Block Revision +* Register n
Quoted 33 lines
Quoted 33 lines
drivers/thermal/qoriq_thermal.c +3
-4+*/ +#define REGS_V2_TEUMR (n) (0xf00 + 4 * (n))/* * Thermal zone data @@ -113,10 +64,8 @@ struct qoriq_sensor {struct qoriq_tmu_data {int ver; -struct qoriq_tmu_regs_v1 __iomem *regs; -struct qoriq_tmu_regs_v2 __iomem *regs_v2; +struct regmap *regmap;struct clk *clk; -bool little_endian;struct qoriq_sensor sensor[SITES_MAX ]; };@@ -125,29 +74,13 @@ static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s) return container_of(s, struct qoriq_tmu_data, sensor[s->id]); } -static void tmu_write(struct qoriq_tmu_data *p, u32 val, void
__iomem
*addr) -{drivers/thermal/qoriq_thermal.c +0
-8-if (p->little_endian) -iowrite32 (val, addr); -else -iowrite32be (val, addr); -} - -static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) -{ -if (p->little_endian)Quoted 8 lines
drivers/thermal/qoriq_thermal.c static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s)
Quoted 8 lines
drivers/thermal/qoriq_thermal.c +0
-5-return ioread32 (addr); - else - return ioread32be(addr); -} -static int tmu_get_temp (void *p,int *temp) {struct qoriq_sensor *qsensor = p; struct qoriq_tmu_data *qdata =
qoriq_sensor_to_data(qsensor);Quoted 4 lines
drivers/thermal/qoriq_thermal.c
Quoted 4 lines
u32 val;drivers/thermal/qoriq_thermal.c +1
-1- val =tmu_read (qdata, &qdata->regs->site[qsensor->id].tritsr); + regmap_read(qdata->regmap, REGS_TRITSR(qsensor->id),&val);
Quoted 9 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_register_tmu_zone(struct · line 193
Quoted 9 lines
*temp = (val & 0xff) * 1000; return 0;drivers/thermal/qoriq_thermal.c +0
-1@@ -189,12 +122,12 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,/* Enable monitoring */ if (sites != 0) {if (qdata->ver ==TMU_VER1 ) { - tmu_write(qdata, sites | TMR_ME |
TMR_ALPF,Quoted 3 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_register_tmu_zone(struct device *dev,
Quoted 3 lines
drivers/thermal/qoriq_thermal.c +2
-1- &qdata->regs->tmr); + regmap_write(qdata->regmap, REGS_TMR, + sites | TMR_ME |
TMR_ALPF);Quoted 12 lines
Quoted 12 lines
drivers/thermal/qoriq_thermal.c +3
-3}else { -tmu_write (qdata, sites, &qdata->regs_v2->tmsr); -tmu_write (qdata,TMR_ME |TMR_ALPF_V2 , - &qdata->regs_v2->tmr); +regmap_write (qdata->regmap,REGS_V2_TMSR , sites); +regmap_write (qdata->regmap,REGS_TMR , +TMR_ME |TMR_ALPF_V2 );} }Quoted 7 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_calibration(struct device · line 160
Quoted 7 lines
drivers/thermal/qoriq_thermal.c +1
-1@@ -223,7 +156,7 @@ static int qoriq_tmu_calibration(struct device *dev,/* Init temperature range registers */ for (i = 0; i < len; i++) -tmu_write (data, range[i], &data->regs->ttrcr[i]); + regmap_write(data->regmap, REGS_TTRnCR(i),range[i]);
Quoted 21 lines
Quoted 21 lines
drivers/thermal/qoriq_thermal.c +0
-0calibration =of_get_property (np,"fsl,tmu-calibration" , &len); if (calibration == NULL || len % 8) { @@ -233,9 +166,9 @@static int qoriq_tmu_calibration(struct device *dev,
for (i = 0; i < len; i += 8, calibration += 2) { val = of_read_number(calibration, 1);drivers/thermal/qoriq_thermal.c +3
-3-tmu_write (data, val, &data->regs->ttcfgr); +regmap_write (data->regmap,REGS_TTCFGR , val); val =of_read_number (calibration +1 ,1 ); -tmu_write (data, val, &data->regs->tscfgr); +regmap_write (data->regmap,REGS_TSCFGR , val); }return 0 ;@@ -244,20 +177,40 @@ static int qoriq_tmu_calibration(struct device *dev, static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) {/* Disable interrupt, using polling instead */ -tmu_write (data,TIER_DISABLE , &data->regs->tier); +regmap_write (data->regmap,REGS_TIER ,TIER_DISABLE );Quoted 11 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_calibration(struct device · line 256
Quoted 11 lines
drivers/thermal/qoriq_thermal.c +2
-3/* Set update_interval */ +if (data->ver ==TMU_VER1 ) { -tmu_write (data,TMTMIR_DEFAULT , &data->regs->tmtmir); +regmap_write (data->regmap,REGS_TMTMIR ,TMTMIR_DEFAULT ); }else { -tmu_write (data,TMTMIR_DEFAULT , &data->regs_v2->tmtmir); - tmu_write(data, TEUMR0_V2,
&data->regs_v2->teumr0);Quoted 82 lines
Quoted 82 lines
drivers/thermal/qoriq_thermal.c +21
-1+regmap_write (data->regmap,REGS_V2_TMTMIR ,TMTMIR_DEFAULT ); +regmap_write (data->regmap,REGS_V2_TEUMR (0 ),TEUMR0_V2 ); }/* Disable monitoring */ -tmu_write (data,TMR_DISABLE , &data->regs->tmr); +regmap_write (data->regmap,REGS_TMR ,TMR_DISABLE ); } +static const struct regmap_range qoriq_yes_ranges[] = { +regmap_reg_range (REGS_TMR ,REGS_TSCFGR ), +regmap_reg_range (REGS_TTRnCR (0 ),REGS_TTRnCR (3 )), +regmap_reg_range (REGS_V2_TEUMR (0 ),REGS_V2_TEUMR (2 )), +regmap_reg_range (REGS_IPBRR (0 ),REGS_IPBRR (1 )), +/* Read only registers below */ +regmap_reg_range (REGS_TRITSR (0 ),REGS_TRITSR (15 )), }; + +static const struct regmap_access_table qoriq_wr_table = { + .yes_ranges = qoriq_yes_ranges, + .n_yes_ranges =ARRAY_SIZE (qoriq_yes_ranges) -1 , +}; + +static const struct regmap_access_table qoriq_rd_table = { + .yes_ranges = qoriq_yes_ranges, + .n_yes_ranges =ARRAY_SIZE (qoriq_yes_ranges), +}; +static int qoriq_tmu_probe (struct platform_device *pdev) {int ret;@@ -265,18 +218,37 @@ static int qoriq_tmu_probe(struct
platform_device
*pdev)struct qoriq_tmu_data *data; struct device_node *np = pdev->dev.of_node; struct device *dev = &pdev->dev;+ const bool
little_endian= of_property_read_bool(np,
"little-endian");drivers/thermal/qoriq_thermal.c +2
-0+const enum regmap_endian format_endian = + little_endian ? REGMAP_ENDIAN_LITTLE :
REGMAP_ENDIAN_BIG;drivers/thermal/qoriq_thermal.c +17
-5+const struct regmap_config regmap_config = { + .reg_bits =32 , + .val_bits =32 , + .reg_stride =4 , + .rd_table = &qoriq_rd_table, + .wr_table = &qoriq_wr_table, + .val_format_endian = format_endian, + .max_register =SZ_4K , + }; +void __iomem *base; data =devm_kzalloc (dev,sizeof (struct qoriq_tmu_data ),GFP_KERNEL );if (!data)return -ENOMEM ; - data->little_endian =of_property_read_bool (np,"little-endian" ); - - data->regs =devm_platform_ioremap_resource (pdev,0 ); -if (IS_ERR (data->regs)) { + base =devm_platform_ioremap_resource (pdev,0 ); + ret =PTR_ERR_OR_ZERO (base); +if (ret) {dev_err (dev,"Failed to get memory region\n" ); -return PTR_ERR (data->regs); +return ret; + } + + data->regmap = devm_regmap_init_mmio(dev, base,
®map_config);drivers/thermal/qoriq_thermal.c +5
-0+ ret =PTR_ERR_OR_ZERO (data->regmap); +if (ret) { +dev_err (dev,"Failed to init regmap (%d)\n" , ret); +return ret; } data->clk = devm_clk_get_optional(dev, NULL); @@ -290,10 +262,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev) }Quoted 5 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_probe(struct platform_device *pdev)
Quoted 5 lines
/* version register offset at: 0xbf8 on both v1 and v2 */drivers/thermal/qoriq_thermal.c +3
-1- ver =tmu_read (data, &data->regs->ipbrr0); + ret =regmap_read (data->regmap,REGS_IPBRR (0 ), &ver); +if (ret) { + dev_err(&pdev->dev, "Failed to read IP blockversion\n");
Quoted 27 lines
Quoted 27 lines
drivers/thermal/qoriq_thermal.c +2
-2+return ret; + } data->ver = (ver >>8 ) &0xff ; -if (data->ver ==TMU_VER2 ) - data->regs_v2 = (void __iomem *)data->regs;qoriq_tmu_init_device (data);/* TMU initialization */ @@ -323,7 +297,7 @@ static int qoriq_tmu_remove(struct
platform_device
*pdev)struct qoriq_tmu_data *data = platform_get_drvdata(pdev); /* Disable monitoring */drivers/thermal/qoriq_thermal.c +2
-2-tmu_write (data,TMR_DISABLE , &data->regs->tmr); +regmap_write (data->regmap,REGS_TMR ,TMR_DISABLE );clk_disable_unprepare (data->clk);@@ -332,13 +306,12 @@ static int qoriq_tmu_remove(struct platform_device *pdev)static int __maybe_unused qoriq_tmu_suspend (struct device *dev) { -u32 tmr;struct qoriq_tmu_data *data =dev_get_drvdata (dev); +int ret;Quoted 5 lines
drivers/thermal/qoriq_thermal.c static int qoriq_tmu_remove(struct platform_device *pdev)
Quoted 5 lines
drivers/thermal/qoriq_thermal.c +1
-4-/* Disable monitoring */ - tmr =tmu_read (data, &data->regs->tmr); - tmr &= ~TMR_ME ; -tmu_write (data, tmr, &data->regs->tmr); + ret = regmap_update_bits(data->regmap, REGS_TMR,
TMR_ME,Quoted 18 lines
Quoted 18 lines
drivers/thermal/qoriq_thermal.c +2
-10); +if (ret) +return ret;clk_disable_unprepare (data->clk);@@ -347,7 +320,6 @@ static int __maybe_unused qoriq_tmu_suspend(struct device *dev) static int __maybe_unused qoriq_tmu_resume(struct device *dev) { -u32 tmr;int ret;struct qoriq_tmu_data *data =dev_get_drvdata (dev);@@ -356,11 +328,7 @@ static int __maybe_unused qoriq_tmu_resume(struct device *dev) return ret;Quoted 7 lines
drivers/thermal/qoriq_thermal.c static int __maybe_unused qoriq_tmu_resume(struct device *dev)
Quoted 7 lines
drivers/thermal/qoriq_thermal.c +1
-5/* Enable monitoring */ - tmr =tmu_read (data, &data->regs->tmr); - tmr |=TMR_ME ; -tmu_write (data, tmr, &data->regs->tmr); - -return 0 ; + return regmap_update_bits(data->regmap, REGS_TMR,
TMR_ME,Quoted 7 lines
Quoted 6 lines
drivers/thermal/qoriq_thermal.c +1
-1+ TMR_ME); } static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, --2.21.0
--
<https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
linaro.org%2F&data=02%7C01%7Candy.tang%40nxp.com%7Cc8504714 5f15471a47f308d77fa0c37a%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0 %7C0%7C637118200760390874&sdata=OZc2lZ%2B8UXPghJzpPdKvwlP 0loBLkJWeFi0Ffq0rsiw%3D&reserved=0> Linaro.org │ Open source software for ARM SoCsFollow Linaro:
<https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
facebook.com%2Fpages%2FLinaro&data=02%7C01%7Candy.tang%40nx p.com%7Cc85047145f15471a47f308d77fa0c37a%7C686ea1d3bc2b4c6fa92cd 99c5c301635%7C0%7C0%7C637118200760390874&sdata=oplTFz7vaO nnfQpVPY%2Fjc%2B6mRf%2B%2Fhb1EXB5D29eB9eY%3D&reserved=0> Facebook |
<https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ftwitte
r.com%2F%23!%2Flinaroorg&data=02%7C01%7Candy.tang%40nxp.com %7Cc85047145f15471a47f308d77fa0c37a%7C686ea1d3bc2b4c6fa92cd99c5c 301635%7C0%7C0%7C637118200760390874&sdata=oMmBJEGN2ynpg SwRrfYd4VrKFOt8ytFQRS1k%2Fl33IPc%3D&reserved=0> Twitter |
<https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
linaro.org%2Flinaro-blog%2F&data=02%7C01%7Candy.tang%40nxp.co m%7Cc85047145f15471a47f308d77fa0c37a%7C686ea1d3bc2b4c6fa92cd99c 5c301635%7C0%7C0%7C637118200760390874&sdata=885EiSd31rVjAN B2lSa8%2FSxzpE9DcpFAOSRKDoof2TU%3D&reserved=0> Blog
PATCH v8 9/12 thermal: qoriq: Enable all sensors before registering them
In reply to Andrey SmirnovTmu_get_temp will get called as a part of sensor registration via devm_thermal_zone_of_sensor_register(). To prevent it from retruning bogus data we need to enable sensor monitoring before that. Looking at the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in enabling them all, so, for the sake of simplicity, change the code to do just that.
--- drivers/thermal/qoriq_thermal.c | 31 ++++++++++++------------------- 1 file changed, 12 insertions(+), 19 deletions(-)
drivers/thermal/qoriq_thermal.c +12 -19
@@ -29,6 +29,7 @@#define TMR_DISABLE 0x0#define TMR_ME 0x80000000#define TMR_ALPF 0x0c000000 +#define TMR_MSITE_ALL GENMASK(15, 0)#define REGS_TMTMIR 0x008/* Temperature measurement interval Register */ #define TMTMIR_DEFAULT 0x0000000f
@@ -93,7 +94,15 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = {static int qoriq_tmu_register_tmu_zone (struct device *dev,struct qoriq_tmu_data *qdata) { -int id, sites =0 ; +int id; + +if (qdata->ver ==TMU_VER1 ) { +regmap_write (qdata->regmap,REGS_TMR , +TMR_MSITE_ALL |TMR_ME |TMR_ALPF ); + }else { +regmap_write (qdata->regmap,REGS_V2_TMSR ,TMR_MSITE_ALL ); +regmap_write (qdata->regmap,REGS_TMR ,TMR_ME |TMR_ALPF_V2 ); + }for (id =0 ; id <SITES_MAX ; id++) {struct thermal_zone_device *tzd;
@@ -109,25 +118,9 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,if (ret) {if (ret == -ENODEV )continue ; -else -return ret; - } -if (qdata->ver ==TMU_VER1 ) - sites |=0x1 << (15 - id); -else - sites |=0x1 << id; - } - -/* Enable monitoring */ -if (sites !=0 ) { -if (qdata->ver ==TMU_VER1 ) { -regmap_write (qdata->regmap,REGS_TMR , - sites |TMR_ME |TMR_ALPF ); - }else { -regmap_write (qdata->regmap,REGS_V2_TMSR , sites); -regmap_write (qdata->regmap,REGS_TMR , -TMR_ME |TMR_ALPF_V2 ); +regmap_write (qdata->regmap,REGS_TMR ,TMR_DISABLE ); +return ret; } }
Signature · 1 line
2.21.0
PATCH v8 10/12 thermal: qoriq: Do not report invalid temperature reading
In reply to Andrey SmirnovBefore returning measured temperature data to upper layer we need to make sure that the reading was marked as "valid" to avoid reporting bogus data.
--- drivers/thermal/qoriq_thermal.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
drivers/thermal/qoriq_thermal.c +18 -1
@@ -48,6 +48,7 @@#define REGS_TRITSR (n) (0x100 + 16 * (n))/* Immediate Temperature * Site Register */ +#define TRITSR_V BIT(31)#define REGS_TTRnCR (n) (0xf10 + 4 * (n))/* Temperature Range n * Control Register */
@@ -80,8 +81,24 @@ static int tmu_get_temp(void *p, int *temp)struct qoriq_sensor *qsensor = p;struct qoriq_tmu_data *qdata =qoriq_sensor_to_data (qsensor);u32 val; +/* +* REGS_TRITSR(id) has the following layout: +* +* 31 ... 7 6 5 4 3 2 1 0 +* V TEMP +* +* Where V bit signifies if the measurement is ready and is +* within sensor range. TEMP is an 8 bit value representing +* temperature in C. +*/ +if (regmap_read_poll_timeout (qdata->regmap, +REGS_TRITSR (qsensor->id), + val, + val &TRITSR_V , +USEC_PER_MSEC , +10 *USEC_PER_MSEC )) +return -ENODATA ; -regmap_read (qdata->regmap,REGS_TRITSR (qsensor->id), &val); *temp = (val &0xff ) *1000 ;return 0 ;
Signature · 1 line
2.21.0
PATCH v8 11/12 thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
In reply to Andrey SmirnovAdd devres wrapper for thermal_add_hwmon_sysfs() to simplify driver code.
--- drivers/thermal/thermal_hwmon.c | 28 ++++++++++++++++++++++++++++ drivers/thermal/thermal_hwmon.h | 7 +++++++ 2 files changed, 35 insertions(+)
drivers/thermal/thermal_hwmon.c +28 -0
@@ -248,3 +248,31 @@ void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)kfree (hwmon); }EXPORT_SYMBOL_GPL (thermal_remove_hwmon_sysfs); + +static void devm_thermal_hwmon_release (struct device *dev,void *res) +{ +thermal_remove_hwmon_sysfs (*(struct thermal_zone_device **)res); +} + +int devm_thermal_add_hwmon_sysfs (struct thermal_zone_device *tz) +{ +struct thermal_zone_device **ptr; +int ret; + + ptr =devres_alloc (devm_thermal_hwmon_release,sizeof (*ptr), +GFP_KERNEL ); +if (!ptr) +return -ENOMEM ; + + ret =thermal_add_hwmon_sysfs (tz); +if (ret) { +devres_free (ptr); +return ret; + } + + *ptr = tz; +devres_add (&tz->device, ptr); + +return ret; +} +EXPORT_SYMBOL_GPL (devm_thermal_add_hwmon_sysfs);
drivers/thermal/thermal_hwmon.h +7 -0
@@ -17,6 +17,7 @@#ifdef CONFIG_THERMAL_HWMON int thermal_add_hwmon_sysfs (struct thermal_zone_device *tz); +int devm_thermal_add_hwmon_sysfs (struct thermal_zone_device *tz);void thermal_remove_hwmon_sysfs (struct thermal_zone_device *tz);#else static inline int
@@ -25,6 +26,12 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)return 0 ; } +static inline int +devm_thermal_add_hwmon_sysfs (struct thermal_zone_device *tz) +{ +return 0 ; +} +static inline void thermal_remove_hwmon_sysfs (struct thermal_zone_device *tz) {
Signature · 1 line
2.21.0
PATCH v8 12/12 thermal: qoriq: Add hwmon support
In reply to Andrey SmirnovExpose thermal readings as a HWMON device, so that it could be accessed using lm-sensors.
--- drivers/thermal/qoriq_thermal.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/thermal/qoriq_thermal.c +6 -0
@@ -13,6 +13,7 @@#include <linux/thermal.h> #include "thermal_core.h" +#include "thermal_hwmon.h" #define SITES_MAX 16#define TMR_DISABLE 0x0
@@ -139,6 +140,11 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,regmap_write (qdata->regmap,REGS_TMR ,TMR_DISABLE );return ret; } + +if (devm_thermal_add_hwmon_sysfs (tzd)) +dev_warn (dev, +"Failed to add hwmon sysfs attributes\n" ); + }return 0 ;
Signature · 1 line
2.21.0
Daniel Lezcano
AppliedQuoted 7 lines · Andrey Smirnov
Everyone:
This series contains patches adding support for HWMON integration, bug fixes and general improvements (hopefully) for TMU driver I made while working on it on i.MX8MQ.
Feedback is welcome!
Applied, thanks!
-- Daniel
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog