ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC
Subsystems (2)
PATCH v4 2/2 ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC
The Yosemite V2 is a facebook multi-node server
platform that host four OCP server. The BMC
in the Yosemite V2 platform based on AST2500 SoC.
This patch adds linux device tree entry related to Yosemite V2 specific devices connected to BMC SoC.
--- Reviews summary
--- v4[2/2] - Spell and contributor name correction.
--- - License identifier changed to GPL-2.0-or-later. --- - aspeed-gpio.h removed. --- - FAN2 tacho channel changed. --- v4 - Bootargs removed. --- v3 - Uart1 Debug removed . --- v2 - LPC and VUART removed . --- v1 - Initial draft.
Signed-off-by Manikandan Elumalai <[email protected]>
Acked-by Andrew Jeffery <[email protected]>
Reviewed-by Vijay Khemka <[email protected]>
--- .../boot/dts/aspeed-bmc-facebook-yosemitev2.dts | 148 +++++++++++++++++++++ 1 file changed, 148 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts new file +148 -0
@@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright (c) 2018 Facebook Inc. + +/dts-v1/; + +#include "aspeed-g5.dtsi" +/ { + model = "Facebook Yosemitev2 BMC"; + compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500"; + aliases { + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + }; + + memory at 80000000 { + reg = <0x80000000 0x20000000>; + }; + + iio-hwmon { + // VOLATAGE SENSOR + compatible = "iio-hwmon"; + io-channels = <&adc 0> , <&adc 1> , <&adc 2> , <&adc 3> , + <&adc 4> , <&adc 5> , <&adc 6> , <&adc 7> , + <&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> , + <&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ; + }; +}; + +&fmc { + status = "okay"; + flash at 0 { + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash at 0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + // BMC Console + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&i2c8 { + //FRU EEPROM + status = "okay"; + eeprom at 51 { + compatible = "atmel,24c64"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&i2c9 { + //INLET & OUTLET TEMP + status = "okay"; + tmp421 at 4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + tmp421 at 4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; +}; + +&i2c10 { + //HSC + status = "okay"; + adm1278 at 40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c11 { + //MEZZ_TEMP_SENSOR + status = "okay"; + tmp421 at 1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; +}; + +&i2c12 { + //MEZZ_FRU + status = "okay"; + eeprom at 51 { + compatible = "atmel,24c64"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&pwm_tacho { + //FSC + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + fan at 0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + fan at 1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; +};
Signature · 1 line
2.7.4
Hi Mani,
Please submit patch version 5 and put review comments below (---) line like below. And send as a patch submission not replied to this email.
The Yosemite V2 is a facebook multi-node server
platform that host four OCP server. The BMC in the Yosemite V2 platform based on AST2500 SoC.
This patch adds linux device tree entry related to Yosemite V2 specific devices connected to BMC SoC.
Signed-off-by Manikandan Elumalai <[email protected]>
Acked-by Andrew Jeffery <[email protected]>
Reviewed-by Vijay Khemka <[email protected]>
---
--- v5 - Spell and contributor name correction.
--- - License identifier changed to GPL-2.0-or-later.
--- - aspeed-gpio.h removed.
--- - FAN2 tacho channel changed.
--- v4 - Bootargs removed.
--- v3 - Uart1 Debug removed .
--- v2 - LPC and VUART removed .
--- v1 - Initial draft.
.../boot/dts/aspeed-bmc-facebook-yosemitev2.dts | 148 +++++++++++++++++++++
1 file changed, 148 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
Regards
-Vijay
?On 12/12/19, 5:08 AM, "Manikandan Elumalai" <[email protected]> wrote:
The Yosemite V2 is a facebook multi-node server
platform that host four OCP server. The BMC
in the Yosemite V2 platform based on AST2500 SoC.
This patch adds linux device tree entry related to
Yosemite V2 specific devices connected to BMC SoC.
--- Reviews summary
--- v4[2/2] - Spell and contributor name correction.
--- - License identifier changed to GPL-2.0-or-later.
--- - aspeed-gpio.h removed.
--- - FAN2 tacho channel changed.
--- v4 - Bootargs removed.
--- v3 - Uart1 Debug removed .
--- v2 - LPC and VUART removed .
--- v1 - Initial draft.
Signed-off-by: Manikandan Elumalai <[email protected]>
Acked-by : Andrew Jeffery <[email protected]>
Reviewed-by: Vijay Khemka <[email protected]>
---
.../boot/dts/aspeed-bmc-facebook-yosemitev2.dts | 148 +++++++++++++++++++++
1 file changed, 148 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 0000000..ffd7f4c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2018 Facebook Inc.
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+/ {
+ model = "Facebook Yosemitev2 BMC";
+ compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+ aliases {
+ serial4 = &uart5;
+ };
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory at 80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ iio-hwmon {
+ // VOLATAGE SENSOR
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0> , <&adc 1> , <&adc 2> , <&adc 3> ,
+ <&adc 4> , <&adc 5> , <&adc 6> , <&adc 7> ,
+ <&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+ <&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ // BMC Console
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&i2c8 {
+ //FRU EEPROM
+ status = "okay";
+ eeprom at 51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&i2c9 {
+ //INLET & OUTLET TEMP
+ status = "okay";
+ tmp421 at 4e {
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+ tmp421 at 4f {
+ compatible = "ti,tmp421";
+ reg = <0x4f>;
+ };
+};
+
+&i2c10 {
+ //HSC
+ status = "okay";
+ adm1278 at 40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c11 {
+ //MEZZ_TEMP_SENSOR
+ status = "okay";
+ tmp421 at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+};
+
+&i2c12 {
+ //MEZZ_FRU
+ status = "okay";
+ eeprom at 51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&pwm_tacho {
+ //FSC
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+ fan at 1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+};
--
2.7.4