Skip to contentSkip to conversation

ARM: dts: am335x-evm: Use drm simple-panel instead of tilcdc-panel

PATCH In review Jyri Sarha 2 participants 2 messages Dec 3, 2019 – Dec 12, 2019 Device tree bindings

lore
Share & tools
lore

Jyri Sarha

author
#0 lore raw

PATCH v2 1/1 ARM: dts: am335x-evm: Use drm simple-panel instead of tilcdc-panel

Move to use the new drm panel support in tilcdc together with added "tfc,s9700rtwv43tr-01b"-panel support in drm panel-simple.

---
"tfc,s9700rtwv43tr-01b" in panel-simple has been in for some time now so it is about time to get this in too.

Since first version:
- drop status = "okay";
- blank line before port node
- drop ports node
- drop Tomi's reviewed-by because of above changes
- add Laurent's reviewed-by

 arch/arm/boot/dts/am335x-evm.dts | 40 +++++++++++---------------------
 1 file changed, 13 insertions(+), 27 deletions(-)
arch/arm/boot/dts/am335x-evm.dts +13 -27
index a00145705c9b..84dfc40af7c5 100644
@@ -113,7 +113,7 @@
 		};
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 0>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -121,35 +121,15 @@
 	};
 
 	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
+		compatible = "tfc,s9700rtwv43tr-01b";
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
+		backlight = <&backlight>;
 
-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
+		port {
+			panel_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
 			};
 		};
 	};
@@ -525,6 +505,12 @@
 	status = "okay";
 
 	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
 };
 
 &elm {
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw
Quoted 8 lines · Jyri Sarha

Move to use the new drm panel support in tilcdc together with added "tfc,s9700rtwv43tr-01b"-panel support in drm panel-simple.

---
"tfc,s9700rtwv43tr-01b" in panel-simple has been in for some time now so it is about time to get this in too.

Thanks applying into omap-for-v5.6/dt.

Tony