net: mscc: ocelot: hide MSCC_OCELOT_SWITCH and move outside NET_VENDOR_MICROSEMI
Subsystems (4)
Vladimir Oltean
maintainerPATCH 1/1 net: mscc: ocelot: hide MSCC_OCELOT_SWITCH and move outside NET_VENDOR_MICROSEMI
From: Vladimir Oltean <[email protected]>
NET_DSA_MSCC_FELIX and MSCC_OCELOT_SWITCH_OCELOT are 2 different drivers that use the same core operations, compiled under MSCC_OCELOT_SWITCH.
The DSA driver depends on HAVE_NET_DSA, and the switchdev driver depends on NET_VENDOR_MICROSEMI. This dependency is purely cosmetic (to hide options per driver class, or per networking vendor) from menuconfig choices.
However, there is an issue with the fact that the common core depends on NET_VENDOR_MICROSEMI, as can be seen below, when building the DSA driver:
WARNING: unmet direct dependencies detected for MSCC_OCELOT_SWITCH Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROSEMI [=n] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] Selected by [y]:NET_DSA_MSCC_FELIX [=y] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && NET_DSA [=y] && PCI [=y]
We don't want to make NET_DSA_MSCC_FELIX hidden under NET_VENDOR_MICROSEMI, since it is physically located under drivers/net/dsa and already findable in the configurator through DSA.
So we move the common Ocelot core outside the NET_VENDOR_MICROSEMI selector, and we make the switchdev and DSA drivers select it by default. In that process, we hide it from menuconfig, since the user shouldn't need to know anything about it, and we change it from tristate to bool, since it doesn't make a lot of sense to have it as yet another loadable kernel module.
With this, the DSA driver also needs to explicitly depend on ETHERNET, to avoid an unmet dependency situation caused by selecting MSCC_OCELOT_SWITCH when ETHERNET is disabled.
A few more dependencies were shuffled around. HAS_IOMEM is now "depends" to avoid a circular dependency:
symbol HAS_IOMEM is selected by MSCC_OCELOT_SWITCH symbol MSCC_OCELOT_SWITCH depends on NETDEVICES symbol NETDEVICES is selected by SCSI_CXGB3_ISCSI symbol SCSI_CXGB3_ISCSI depends on SCSI_LOWLEVEL symbol SCSI_LOWLEVEL depends on SCSI symbol SCSI is selected by ATA
symbol ATA depends on HAS_IOMEM
--- drivers/net/dsa/ocelot/Kconfig | 2 +- drivers/net/ethernet/mscc/Kconfig | 27 ++++++++++++++++----------- 2 files changed, 17 insertions(+), 12 deletions(-)
drivers/net/dsa/ocelot/Kconfig +1 -1
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config NET_DSA_MSCC_FELIX tristate "Ocelot / Felix Ethernet switch support" - depends on NET_DSA && PCI + depends on NET_DSA && PCI && ETHERNET select MSCC_OCELOT_SWITCH select NET_DSA_TAG_OCELOT help
drivers/net/ethernet/mscc/Kconfig +16 -11
@@ -9,24 +9,29 @@ config NET_VENDOR_MICROSEMI kernel: saying N will just cause the configurator to skip all the questions about Microsemi devices. -if NET_VENDOR_MICROSEMI - config MSCC_OCELOT_SWITCH - tristate "Ocelot switch driver" + bool depends on NET_SWITCHDEV depends on HAS_IOMEM - select PHYLIB select REGMAP_MMIO + select PHYLIB help - This driver supports the Ocelot network switch device. + This is the core library for the Vitesse / Microsemi / Microchip + Ocelot network switch family. It offers a set of DSA-compatible + switchdev operations for managing switches of this class, like: + - VSC7514 + - VSC9959 + +if NET_VENDOR_MICROSEMI config MSCC_OCELOT_SWITCH_OCELOT - tristate "Ocelot switch driver on Ocelot" - depends on MSCC_OCELOT_SWITCH - depends on GENERIC_PHY - depends on OF_NET + tristate "Ocelot switch driver for local management CPUs" + select MSCC_OCELOT_SWITCH + select GENERIC_PHY + select OF_NET help - This driver supports the Ocelot network switch device as present on - the Ocelot SoCs. + This supports the network switch present on the Ocelot SoCs + (VSC7514). The driver is intended for use on the local MIPS + management CPU. Frame transfer is through polled I/O or DMA. endif # NET_VENDOR_MICROSEMI
Signature · 1 line
2.7.4
Quoted 25 lines · Vladimir Oltean
From: Vladimir Oltean <[email protected]>
NET_DSA_MSCC_FELIXandMSCC_OCELOT_SWITCH_OCELOTare 2 different drivers that use the same core operations, compiled underMSCC_OCELOT_SWITCH.The DSA driver depends on
HAVE_NET_DSA, and the switchdev driver depends onNET_VENDOR_MICROSEMI. This dependency is purely cosmetic (to hide options per driver class, or per networking vendor) from menuconfig choices.However, there is an issue with the fact that the common core depends on
NET_VENDOR_MICROSEMI, as can be seen below, when building the DSA driver:WARNING: unmet direct dependencies detected for
MSCC_OCELOT_SWITCHDepends on [n]: NETDEVICES [=y] && ETHERNET [=y] &&NET_VENDOR_MICROSEMI[=n] &&NET_SWITCHDEV[=y] &&HAS_IOMEM[=y] Selected by [y]:NET_DSA_MSCC_FELIX[=y] && NETDEVICES [=y] &&HAVE_NET_DSA[=y] &&NET_DSA[=y] && PCI [=y]We don't want to make
NET_DSA_MSCC_FELIXhidden underNET_VENDOR_MICROSEMI, since it is physically located underdrivers/net/dsaand already findable in the configurator through DSA.
Quoted 6 lines
So we move the common Ocelot core outside the
NET_VENDOR_MICROSEMIselector, and we make the switchdev and DSA drivers select it by default. In that process, we hide it from menuconfig, since the user shouldn't need to know anything about it, and we change it from tristate to bool, since it doesn't make a lot of sense to have it as yet another loadable kernel module.
Mmm. Is that really the only choice? Wouldn't it be better to do something like:
drivers/net/ethernet/mscc/Kconfig +2 -1
@@ -10,7 +10,8 @@ config NET_VENDOR_MICROSEMI the questions about Microsemi devices. config MSCC_OCELOT_SWITCH - bool + tristate + default (MSCC_OCELOT_SWITCH_OCELOT || NET_DSA_MSCC_FELIX) depends on NET_SWITCHDEV depends on HAS_IOMEM select REGMAP_MMIO
Presumably if user wants the end driver to be loadable module the library should default to a module?
Quoted 45 lines
With this, the DSA driver also needs to explicitly depend on ETHERNET, to avoid an unmet dependency situation caused by selecting
MSCC_OCELOT_SWITCHwhen ETHERNET is disabled.A few more dependencies were shuffled around.
HAS_IOMEMis now "depends" to avoid a circular dependency:symbol
HAS_IOMEMis selected byMSCC_OCELOT_SWITCHsymbolMSCC_OCELOT_SWITCHdepends on NETDEVICES symbol NETDEVICES is selected bySCSI_CXGB3_ISCSIsymbolSCSI_CXGB3_ISCSIdepends onSCSI_LOWLEVELsymbolSCSI_LOWLEVELdepends on SCSI symbol SCSI is selected by ATA
symbol ATA depends onHAS_IOMEMFixes 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")Reported-by Arnd Bergmann <[email protected]>Reported-by Mao Wenan <[email protected]>Signed-off-by Vladimir Oltean <[email protected]>--- drivers/net/dsa/ocelot/Kconfig | 2 +- drivers/net/ethernet/mscc/Kconfig | 27 ++++++++++++++++----------- 2 files changed, 17 insertions(+), 12 deletions(-)drivers/net/dsa/ocelot/Kconfig +1
-1@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config NET_DSA_MSCC_FELIX tristate "Ocelot / Felix Ethernet switch support" - depends on NET_DSA && PCI + depends on NET_DSA && PCI && ETHERNET select MSCC_OCELOT_SWITCH select NET_DSA_TAG_OCELOT helpdrivers/net/ethernet/mscc/Kconfig +0
-0@@ -9,24 +9,29 @@ config NET_VENDOR_MICROSEMI kernel: saying N will just cause the configurator to skip all the questions about Microsemi devices.
drivers/net/ethernet/mscc/Kconfig config NET_VENDOR_MICROSEMI · line 17
Quoted 10 lines
drivers/net/ethernet/mscc/Kconfig +2
-4-if NET_VENDOR_MICROSEMI - config MSCC_OCELOT_SWITCH - tristate "Ocelot switch driver" + bool depends on NET_SWITCHDEV depends on HAS_IOMEM - select PHYLIB select REGMAP_MMIO + select PHYLIB
The move of select PHYLIB seems unnecessary, is there a reason? Otherwise since this is net material perhaps better to refrain from it.
Quoted 27 lines
drivers/net/ethernet/mscc/Kconfig +13
-7help - This driver supports the Ocelot network switch device. + This is the core library for the Vitesse / Microsemi / Microchip + Ocelot network switch family. It offers a set of DSA-compatible + switchdev operations for managing switches of this class, like: + - VSC7514 + - VSC9959 +if NET_VENDOR_MICROSEMI config MSCC_OCELOT_SWITCH_OCELOT - tristate "Ocelot switch driver on Ocelot" - depends on MSCC_OCELOT_SWITCH - depends on GENERIC_PHY - depends on OF_NET + tristate "Ocelot switch driver for local management CPUs" + select MSCC_OCELOT_SWITCH + select GENERIC_PHY + select OF_NET help - This driver supports the Ocelot network switch device as present on - the Ocelot SoCs. + This supports the network switch present on the Ocelot SoCs + (VSC7514). The driver is intended for use on the local MIPS + management CPU. Frame transfer is through polled I/O or DMA. endif # NET_VENDOR_MICROSEMI
Quoted 21 lines · Jakub Kicinski
Quoted 1 line · Vladimir Oltean
From: Vladimir Oltean <[email protected]>
Mmm. Is that really the only choice? Wouldn't it be better to do something like:
drivers/net/ethernet/mscc/Kconfig +2
-1@@ -10,7 +10,8 @@ config NET_VENDOR_MICROSEMI the questions about Microsemi devices. config MSCC_OCELOT_SWITCH - bool + tristate + default (MSCC_OCELOT_SWITCH_OCELOT || NET_DSA_MSCC_FELIX) depends on NET_SWITCHDEV depends on HAS_IOMEM select REGMAP_MMIO
Quoted 2 lines
Presumably if user wants the end driver to be loadable module the library should default to a module?
Agreed, should be tristate.
The 'default' isn't necessary here, the 'select' does it all the same and there only needs to be one of the two.
Quoted 13 lines
Quoted 13 lines
drivers/net/ethernet/mscc/Kconfig +1
-3@@ -9,24 +9,29 @@ config NET_VENDOR_MICROSEMI kernel: saying N will just cause the configurator to skip all the questions about Microsemi devices. -if NET_VENDOR_MICROSEMI - config MSCC_OCELOT_SWITCH - tristate "Ocelot switch driver" + bool
...
Quoted 4 lines
Quoted 4 lines
+if
NET_VENDOR_MICROSEMIconfig
MSCC_OCELOT_SWITCH_OCELOT
...
Quoted 3 lines
drivers/net/ethernet/mscc/Kconfig
Quoted 3 lines
drivers/net/ethernet/mscc/Kconfig +2
-0+ tristate "Ocelot switch driver for local management CPUs" + select MSCC_OCELOT_SWITCH endif # NET_VENDOR_MICROSEMI
The "if NET_VENDOR_MICROSEMI" must come directly after the config NET_VENDOR_MICROSEMI, otherwise the indentation in "make menuconfig" is wrong. So please move MSCC_OCELOT_SWITCH after the "endif".
Arnd
Quoted 10 lines · Vladimir Oltean
From: Vladimir Oltean <[email protected]>
NET_DSA_MSCC_FELIXandMSCC_OCELOT_SWITCH_OCELOTare 2 different drivers that use the same core operations, compiled underMSCC_OCELOT_SWITCH.Fixes 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")Reported-by Arnd Bergmann <[email protected]>Reported-by Mao Wenan <[email protected]>Signed-off-by Vladimir Oltean <[email protected]>
I did some more build testing and ran into another issue now that MSCC_OCELOT_SWITCH_OCELOT can be built without CONFIG_SWITCHDEV:
WARNING: unmet direct dependencies detected for MSCC_OCELOT_SWITCH
Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_SWITCHDEV
[=n] && HAS_IOMEM [=y]
Selected by [y]:
- MSCC_OCELOT_SWITCH_OCELOT [=y] && NETDEVICES [=y] && ETHERNET [=y]
&& NET_VENDOR_MICROSEMI [=y] drivers/net/ethernet/mscc/ocelot_board.c: In function 'ocelot_xtr_irq_handler':drivers/net/ethernet/mscc/ocelot_board.c:176:7: error: 'struct sk_buff' has no member named 'offload_fwd_mark'
skb->offload_fwd_mark = 1;
^~Adding another "depends on NET_SWITCHDEV" fixed it for me.
Arnd
Quoted 8 lines · Arnd Bergmann
Quoted 5 lines · Vladimir Oltean
From: Vladimir Oltean <[email protected]>
NET_DSA_MSCC_FELIXandMSCC_OCELOT_SWITCH_OCELOTare 2 different drivers that use the same core operations, compiled underMSCC_OCELOT_SWITCH.
Quoted 8 lines
Quoted 4 lines
Fixes 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")Reported-by Arnd Bergmann <[email protected]>Reported-by Mao Wenan <[email protected]>Signed-off-by Vladimir Oltean <[email protected]>I did some more build testing and ran into another issue now that
MSCC_OCELOT_SWITCH_OCELOTcan be built withoutCONFIG_SWITCHDEV:
And another one when CONFIG_NET_VENDOR_MICROSEMI is disabled:
ERROR: "ocelot_fdb_dump" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_regfields_init" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_regmap_init" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_init" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_fdb_del" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "__ocelot_write_ix" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_bridge_stp_state_set" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_port_vlan_filtering" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_get_ethtool_stats" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_port_enable" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_vlan_del" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_deinit" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_init_port" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_fdb_add" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
This fixes it:
drivers/net/ethernet/Makefile +1 -1
@@ -55,7 +55,7 @@ obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/ obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/ -obj-$(CONFIG_NET_VENDOR_MICROSEMI) += mscc/ +obj-y += mscc/ obj-$(CONFIG_NET_VENDOR_MOXART) += moxa/ obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/ obj-$(CONFIG_FEALNX) += fealnx.o
Arnd
Vladimir Oltean
maintainerQuoted 46 lines · Arnd Bergmann
Quoted 8 lines · Arnd Bergmann
Quoted 5 lines · Vladimir Oltean
From: Vladimir Oltean <[email protected]>
NET_DSA_MSCC_FELIXandMSCC_OCELOT_SWITCH_OCELOTare 2 different drivers that use the same core operations, compiled underMSCC_OCELOT_SWITCH.Quoted 8 lines
Quoted 4 lines
Fixes 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")Reported-by Arnd Bergmann <[email protected]>Reported-by Mao Wenan <[email protected]>Signed-off-by Vladimir Oltean <[email protected]>I did some more build testing and ran into another issue now that
MSCC_OCELOT_SWITCH_OCELOTcan be built withoutCONFIG_SWITCHDEV:And another one when
CONFIG_NET_VENDOR_MICROSEMIis disabled:ERROR: "
ocelot_fdb_dump" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_regfields_init" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_regmap_init" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_init" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_fdb_del" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "__ocelot_write_ix" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_bridge_stp_state_set" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_port_vlan_filtering" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_get_ethtool_stats" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_port_enable" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_vlan_del" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_deinit" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_init_port" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!
ERROR: "ocelot_fdb_add" [drivers/net/dsa/ocelot/mscc_felix.ko] undefined!This fixes it:
drivers/net/ethernet/Makefile +0
-0
drivers/net/ethernet/Makefile obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/ · line 58
Quoted 5 lines
drivers/net/ethernet/Makefile +1
-1@@ -55,7 +55,7 @@ obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/ obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/ -obj-$(CONFIG_NET_VENDOR_MICROSEMI) += mscc/ +obj-y += mscc/
Thanks Arnd. This is getting out of hand. I'll just opt for the simple solution and make it depend on NET_VENDOR_MICROSEMI.
Quoted 5 lines
drivers/net/ethernet/Makefile +0
-0obj-$(CONFIG_NET_VENDOR_MOXART) += moxa/ obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/ obj-$(CONFIG_FEALNX) += fealnx.oArnd