Skip to contentSkip to conversation

arm64: dts: msm8998-clamshell: Add pm8005_s1 regulator

PATCH New Jeffrey Hugo 1 participant 1 message Dec 17, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: msm8998-clamshell: Add pm8005_s1 regulator

The pm8005_s1 is VDD_GFX, and needs to be on to enable the GPU. This should be hooked up to the GPU CPR, but we don't have support for that yet, so until then, just turn on the regulator and keep it on so that we can focus on basic GPU bringup.

---
 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +17 -0
index 6138b58db6d2..2319315d47b4 100644
@@ -74,6 +74,23 @@
 	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
 };
 
+&pm8005_lsid1 {
+	pm8005-regulators {
+		compatible = "qcom,pm8005-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+
+		pm8005_s1: s1 { /* VDD_GFX supply */
+			regulator-min-microvolt = <524000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-enable-ramp-delay = <500>;
+
+			/* hack until we rig up the gpu consumer */
+			regulator-always-on;
+		};
+	};
+};
+
 &qusb2phy {
 	status = "okay";
 
Signature · 1 line
2.17.1