AM57xx: Fix bugs in device tree files
Subsystems (2)
cover AM57xx: Fix bugs in device tree files
This series
*) Removes gpio property from endpoint device tree node (since it's
used for driving PERST# line)
*) Fix gpio used for driving PERST# line in AM571x IDK *) Model 5V0 regulator which is used for deriving the regulator
connected to COMQ port in beagle x15
Kishon Vijay Abraham I (3):
ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint
dt nodes
ARM: dts: am571x-idk: Fix gpios property to have the correct gpio
number
ARM: dts: beagle-x15-common: Model 5V0 regulator
arch/arm/boot/dts/am571x-idk.dts | 6 +---- arch/arm/boot/dts/am572x-idk-common.dtsi | 4 --- .../boot/dts/am57xx-beagle-x15-common.dtsi | 25 ++++++++++++++++--- 3 files changed, 22 insertions(+), 13 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/3 ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes
PERST# line in the PCIE connector is driven by the host mode and not EP mode. The gpios property here is used for driving the PERST# line. Remove gpios property from all endpoint device tree nodes.
--- arch/arm/boot/dts/am571x-idk.dts | 4 ---- arch/arm/boot/dts/am572x-idk-common.dtsi | 4 ---- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 ---- 3 files changed, 12 deletions(-)
arch/arm/boot/dts/am571x-idk.dts +0 -4
@@ -170,10 +170,6 @@ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; -&pcie1_ep { - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - &mmc1 { pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
arch/arm/boot/dts/am572x-idk-common.dtsi +0 -4
@@ -147,10 +147,6 @@ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; -&pcie1_ep { - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - &mailbox5 { status = "okay"; mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +0 -4
@@ -547,10 +547,6 @@ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; -&pcie1_ep { - gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; -}; - &mcasp3 { #sound-dai-cells = <0>; assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
Signature · 1 line
2.17.1
PATCH 2/3 ARM: dts: am571x-idk: Fix gpios property to have the correct gpio number
In reply to Kishon Vijay Abraham Icommit d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") while adding the dt node for EP mode for DRA7 platform, added rc node for am571x-idk and populated gpios property with "gpio3 23". However the GPIO_PCIE_SWRST line is actually connected to "gpio5 18". Fix it here. (The patch adding "gpio3 23" was tested with another am57x board in EP mode which doesn't rely on reset from host).
EP mode")
Cc: stable <[email protected]> # 4.14+
--- arch/arm/boot/dts/am571x-idk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/am571x-idk.dts +1 -1
@@ -167,7 +167,7 @@ &pcie1_rc { status = "okay"; - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; }; &mmc1 {
Signature · 1 line
2.17.1
PATCH 3/3 ARM: dts: beagle-x15-common: Model 5V0 regulator
In reply to Kishon Vijay Abraham IOn am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19 connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator which is connected to the COMQ port. Model 5V0 regulator here in order for it to be used in am57xx-evm to model 3V6 regulator.
--- .../boot/dts/am57xx-beagle-x15-common.dtsi | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +21 -0
@@ -29,6 +29,27 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + main_12v0: fixedregulator-main_12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "main_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + evm_5v0: fixedregulator-evm_5v0 { + /* Output of TPS54531D */ + compatible = "regulator-fixed"; + regulator-name = "evm_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v0>; + regulator-always-on; + regulator-boot-on; + }; + vdd_3v3: fixedregulator-vdd_3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3";
Signature · 1 line
2.17.1
Quoted 6 lines · Kishon Vijay Abraham I
This series
*) Removes gpio property from endpoint device tree node (since it's
used for driving PERST# line)
*) Fix gpio used for driving PERST# line in AM571x IDK *) Model 5V0 regulator which is used for deriving the regulator
connected to COMQ port in beagle x15
Thanks applying all into fixes.
Tony