5.3.18-stable review

This is the start of the stable review cycle for the 5.3.18 release. There are 25 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Note, this is the LAST 5.3.y kernel to be released, after this one, it will be end-of-life. You should have moved to the 5.4.y series already by now.

Responses should be made by Thu, 19 Dec 2019 20:08:42 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.18-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.3.18-rc1

Jonathan Lemon <[email protected]>
xdp: obtain the mem_id mutex before trying to remove an entry.

Jonathan Lemon <[email protected]>

    page_pool: do not release pool until inflight == 0.

Eran Ben Elisha <[email protected]>
net/mlx5e: Fix TXQ indices to be sequential

Martin Varghese <[email protected]>
net: Fixed updating of ethertype in skb_mpls_push()

Taehee Yoo <[email protected]>
hsr: fix a NULL pointer dereference in hsr_dev_xmit()

Martin Varghese <[email protected]>
Fixed updating of ethertype in function skb_mpls_pop

Cong Wang <[email protected]>

    gre: refetch erspan header from skb->data after pskb_may_pull()

Guillaume Nault <[email protected]>
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()

Guillaume Nault <[email protected]>
tcp: tighten acceptance of ACKs not matching a child socket

Guillaume Nault <[email protected]>
tcp: fix rejected syncookies due to stale timestamps

Sabrina Dubroca <[email protected]>
net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookup

Sabrina Dubroca <[email protected]>
net: ipv6: add net argument to ip6_dst_lookup_flow

Huy Nguyen <[email protected]>
net/mlx5e: Query global pause state before setting prio2buffer

Taehee Yoo <[email protected]>
tipc: fix ordering of tipc module init and exit routine

Eric Dumazet <[email protected]>
tcp: md5: fix potential overestimation of TCP option space

Aaron Conole <[email protected]>
openvswitch: support asymmetric conntrack

Valentin Vidic <[email protected]>
net/tls: Fix return values to avoid ENOTSUPP

Mian Yousaf Kaukab <[email protected]>
net: thunderx: start phy before starting autonegotiation

Jouni Hogander <[email protected]>
net-sysfs: Call dev_hold always in netdev_queue_add_kobject

Dust Li <[email protected]>
net: sched: fix dump qlen for sch_mq/sch_mqprio with NOLOCK subqueues

Grygorii Strashko <[email protected]>
net: ethernet: ti: cpsw: fix extra rx interrupt

Alexander Lobakin <[email protected]>
net: dsa: fix flow dissection on Tx path

Nikolay Aleksandrov <[email protected]>
net: bridge: deny dev_set_mac_address() when unregistering

Vladyslav Tarasiuk <[email protected]>
mqprio: Fix out-of-bounds access in mqprio_dump

Eric Dumazet <[email protected]>
inet: protect against too small mtu values.

-------------

Diffstat:

 Makefile                                           |   4 +-
 drivers/infiniband/core/addr.c                     |   7 +-
 drivers/infiniband/sw/rxe/rxe_net.c                |   8 +-
 drivers/net/ethernet/cavium/thunder/thunder_bgx.c  |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en.h       |   2 +-
 .../ethernet/mellanox/mlx5/core/en/port_buffer.c   |  27 ++++-
 .../net/ethernet/mellanox/mlx5/core/en/tc_tun.c    |   8 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  31 ++----
 drivers/net/ethernet/mellanox/mlx5/core/en_stats.c |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c    |   2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |   4 +-
 drivers/net/ethernet/ti/cpsw.c                     |   2 +-
 drivers/net/geneve.c                               |   4 +-
 drivers/net/vxlan.c                                |   8 +-
 include/linux/netdevice.h                          |   5 +
 include/linux/skbuff.h                             |   5 +-
 include/linux/time.h                               |  13 +++
 include/net/ip.h                                   |   5 +
 include/net/ipv6.h                                 |   2 +-
 include/net/ipv6_stubs.h                           |   6 +-
 include/net/page_pool.h                            |  52 +++------
 include/net/tcp.h                                  |  27 +++--
 include/net/xdp_priv.h                             |   4 -
 include/trace/events/xdp.h                         |  19 +---
 net/bridge/br_device.c                             |   6 +
 net/core/dev.c                                     |   3 +-
 net/core/flow_dissector.c                          |   5 +-
 net/core/lwt_bpf.c                                 |   4 +-
 net/core/net-sysfs.c                               |   7 +-
 net/core/page_pool.c                               | 122 +++++++++++++--------
 net/core/skbuff.c                                  |  10 +-
 net/core/xdp.c                                     | 117 +++++++-------------
 net/dccp/ipv6.c                                    |   6 +-
 net/hsr/hsr_device.c                               |   9 +-
 net/ipv4/devinet.c                                 |   5 -
 net/ipv4/gre_demux.c                               |   2 +-
 net/ipv4/ip_output.c                               |  13 ++-
 net/ipv4/tcp_output.c                              |   5 +-
 net/ipv6/addrconf_core.c                           |  11 +-
 net/ipv6/af_inet6.c                                |   4 +-
 net/ipv6/datagram.c                                |   2 +-
 net/ipv6/inet6_connection_sock.c                   |   4 +-
 net/ipv6/ip6_output.c                              |   8 +-
 net/ipv6/raw.c                                     |   2 +-
 net/ipv6/syncookies.c                              |   2 +-
 net/ipv6/tcp_ipv6.c                                |   4 +-
 net/l2tp/l2tp_ip6.c                                |   2 +-
 net/mpls/af_mpls.c                                 |   7 +-
 net/openvswitch/actions.c                          |   6 +-
 net/openvswitch/conntrack.c                        |  11 ++
 net/sched/act_mpls.c                               |   7 +-
 net/sched/sch_mq.c                                 |   1 +
 net/sched/sch_mqprio.c                             |   3 +-
 net/sctp/ipv6.c                                    |   4 +-
 net/tipc/core.c                                    |  29 ++---
 net/tipc/udp_media.c                               |   9 +-
 net/tls/tls_device.c                               |   8 +-
 net/tls/tls_main.c                                 |   4 +-
 net/tls/tls_sw.c                                   |   8 +-
 tools/testing/selftests/net/tls.c                  |   8 +-
 60 files changed, 375 insertions(+), 332 deletions(-)

From: Eric Dumazet <[email protected]>

[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ]

syzbot was once again able to crash a host by setting a very small mtu on loopback device.

Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data()

Also add a READ_ONCE() when the device mtu is read.

Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field.

Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations.

Hopefully we will add the missing ones in followup patches.

[1]

refcount_t: saturated; leaking memory.

WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 panic+0x2e3/0x75c kernel/panic.c:221
 __warn.cold+0x2f/0x3e kernel/panic.c:582
 report_bug+0x289/0x300 lib/bug.c:195
 fixup_bug arch/x86/kernel/traps.c:174 [inline]
 fixup_bug arch/x86/kernel/traps.c:169 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89
RSP: 0018:ffff88809689f550 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c
RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1
R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001
R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40
 refcount_add include/linux/refcount.h:193 [inline]
 skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999
 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096
 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383
 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276
 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821
 kernel_sendpage+0x92/0xf0 net/socket.c:3794
 sock_sendpage+0x8b/0xc0 net/socket.c:936
 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458
 splice_from_pipe_feed fs/splice.c:512 [inline]
 __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636
 splice_from_pipe+0x108/0x170 fs/splice.c:671
 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842
 do_splice_from fs/splice.c:861 [inline]
 direct_splice_actor+0x123/0x190 fs/splice.c:1035
 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078
 do_sendfile+0x597/0xd00 fs/read_write.c:1464
 __do_sys_sendfile64 fs/read_write.c:1525 [inline]
 __se_sys_sendfile64 fs/read_write.c:1511 [inline]
 __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441409
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409
RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005
RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180
R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000

Kernel Offset: disabled
Rebooting in 86400 seconds..

---
 include/linux/netdevice.h |    5 +++++
 include/net/ip.h          |    5 +++++
 net/core/dev.c            |    3 ++-
 net/ipv4/devinet.c        |    5 -----
 net/ipv4/ip_output.c      |   13 ++++++++-----
 5 files changed, 20 insertions(+), 11 deletions(-)

@@ -1848,6 +1848,11 @@ struct net_device {
 	unsigned char		if_port;
 	unsigned char		dma;
 
+	/* Note : dev->mtu is often read without holding a lock.
+	 * Writers usually hold RTNL.
+	 * It is recommended to use READ_ONCE() to annotate the reads,
+	 * and to use WRITE_ONCE() to annotate the writes.
+	 */
 	unsigned int		mtu;
 	unsigned int		min_mtu;
 	unsigned int		max_mtu;

@@ -759,4 +759,9 @@ int ip_misc_proc_init(void);
 int rtm_getroute_parse_ip_proto(struct nlattr *attr, u8 *ip_proto, u8 family,
 				struct netlink_ext_ack *extack);
 
+static inline bool inetdev_valid_mtu(unsigned int mtu)
+{
+	return likely(mtu >= IPV4_MIN_MTU);
+}
+
 #endif	/* _IP_H */

@@ -7662,7 +7662,8 @@ int __dev_set_mtu(struct net_device *dev
 	if (ops->ndo_change_mtu)
 		return ops->ndo_change_mtu(dev, new_mtu);
 
-	dev->mtu = new_mtu;
+	/* Pairs with all the lockless reads of dev->mtu in the stack */
+	WRITE_ONCE(dev->mtu, new_mtu);
 	return 0;
 }
 EXPORT_SYMBOL(__dev_set_mtu);

@@ -1496,11 +1496,6 @@ skip:
 	}
 }
 
-static bool inetdev_valid_mtu(unsigned int mtu)
-{
-	return mtu >= IPV4_MIN_MTU;
-}
-
 static void inetdev_send_gratuitous_arp(struct net_device *dev,
 					struct in_device *in_dev)
 

@@ -1258,15 +1258,18 @@ static int ip_setup_cork(struct sock *sk
 		cork->addr = ipc->addr;
 	}
 
-	/*
-	 * We steal reference to this route, caller should not release it
-	 */
-	*rtp = NULL;
 	cork->fragsize = ip_sk_use_pmtu(sk) ?
-			 dst_mtu(&rt->dst) : rt->dst.dev->mtu;
+			 dst_mtu(&rt->dst) : READ_ONCE(rt->dst.dev->mtu);
+
+	if (!inetdev_valid_mtu(cork->fragsize))
+		return -ENETUNREACH;
 
 	cork->gso_size = ipc->gso_size;
+
 	cork->dst = &rt->dst;
+	/* We stole this route, caller should not release it. */
+	*rtp = NULL;
+
 	cork->length = 0;
 	cork->ttl = ipc->ttl;
 	cork->tos = ipc->tos;

From: Vladyslav Tarasiuk <[email protected]>

[ Upstream commit 9f104c7736904ac72385bbb48669e0c923ca879b ]

When user runs a command like
tc qdisc add dev eth1 root mqprio
KASAN stack-out-of-bounds warning is emitted.
Currently, NLA_ALIGN macro used in mqprio_dump provides too large buffer size as argument for nla_put and memcpy down the call stack. The flow looks like this:
1. nla_put expects exact object size as an argument;
2. Later it provides this size to memcpy;
3. To calculate correct padding for SKB, nla_put applies NLA_ALIGN macro itself.

Therefore, NLA_ALIGN should not be applied to the nla_put parameter. Otherwise it will lead to out-of-bounds memory access in memcpy.

---
 net/sched/sch_mqprio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -433,7 +433,7 @@ static int mqprio_dump(struct Qdisc *sch
 		opt.offset[tc] = dev->tc_to_txq[tc].offset;
 	}
 
-	if (nla_put(skb, TCA_OPTIONS, NLA_ALIGN(sizeof(opt)), &opt))
+	if (nla_put(skb, TCA_OPTIONS, sizeof(opt), &opt))
 		goto nla_put_failure;
 
 	if ((priv->flags & TC_MQPRIO_F_MODE) &&

From: Nikolay Aleksandrov <[email protected]>

[ Upstream commit c4b4c421857dc7b1cf0dccbd738472360ff2cd70 ]

We have an interesting memory leak in the bridge when it is being unregistered and is a slave to a master device which would change the mac of its slaves on unregister (e.g. bond, team). This is a very unusual setup but we do end up leaking 1 fdb entry because dev_set_mac_address() would cause the bridge to insert the new mac address into its table after all fdbs are flushed, i.e. after dellink() on the bridge has finished and we call NETDEV_UNREGISTER the bond/team would release it and will call dev_set_mac_address() to restore its original address and that in turn will add an fdb in the bridge.
One fix is to check for the bridge dev's reg_state in its ndo_set_mac_address callback and return an error if the bridge is not in NETREG_REGISTERED.

Easy steps to reproduce:
1. add bond in mode != A/B
2. add any slave to the bond
3. add bridge dev as a slave to the bond
4. destroy the bridge device

Trace:
unreferenced object 0xffff888035c4d080 (size 128):
comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s) hex dump (first 32 bytes):

     41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00  A..6............
     d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00  ...^?...........
   backtrace:
     [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f
     [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge]
     [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge]
     [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge]
     [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge]
     [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge]
     [<000000006846a77f>] dev_set_mac_address+0x63/0x9b
     [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding]
     [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding]
     [<00000000305d7795>] notifier_call_chain+0x38/0x56
     [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23
     [<000000008279477b>] rollback_registered_many+0x353/0x6a4
     [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f
     [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43
     [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a
     [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268

---
 net/bridge/br_device.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -253,6 +253,12 @@ static int br_set_mac_address(struct net
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 
+	/* dev_set_mac_addr() can be called by a master device on bridge's
+	 * NETDEV_UNREGISTER, but since it's being destroyed do nothing
+	 */
+	if (dev->reg_state != NETREG_REGISTERED)
+		return -EBUSY;
+
 	spin_lock_bh(&br->lock);
 	if (!ether_addr_equal(dev->dev_addr, addr->sa_data)) {
 		/* Mac address will be changed in br_stp_change_bridge_id(). */

From: Alexander Lobakin <[email protected]>

[ Upstream commit 8bef0af09a5415df761b04fa487a6c34acae74bc ]

Commit 43e665287f93 ("net-next: dsa: fix flow dissection") added an ability to override protocol and network offset during flow dissection for DSA-enabled devices (i.e. controllers shipped as switch CPU ports) in order to fix skb hashing for RPS on Rx path.

However, skb_hash() and added part of code can be invoked not only on Rx, but also on Tx path if we have a multi-queued device and:
- kernel is running on UP system or
- XPS is not configured.

The call stack in this two cases will be like: dev_queue_xmit() -> __dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() -> skb_tx_hash() -> skb_get_hash().

The problem is that skbs queued for Tx have both network offset and correct protocol already set up even after inserting a CPU tag by DSA tagger, so calling tag_ops->flow_dissect() on this path actually only breaks flow dissection and hashing.

This can be observed by adding debug prints just before and right after tag_ops->flow_dissect() call to the related block of code:

Before the patch:

Rx path (RPS):

[   19.240001] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
[   19.244271] tag_ops->flow_dissect()
[   19.247811] Rx: proto: 0x0800, nhoff: 8	/* ETH_P_IP */

[   19.215435] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
[   19.219746] tag_ops->flow_dissect()
[   19.223241] Rx: proto: 0x0806, nhoff: 8	/* ETH_P_ARP */

[   18.654057] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
[   18.658332] tag_ops->flow_dissect()
[   18.661826] Rx: proto: 0x8100, nhoff: 8	/* ETH_P_8021Q */

Tx path (UP system):

[   18.759560] Tx: proto: 0x0800, nhoff: 26	/* ETH_P_IP */
[   18.763933] tag_ops->flow_dissect()
[   18.767485] Tx: proto: 0x920b, nhoff: 34	/* junk */

[   22.800020] Tx: proto: 0x0806, nhoff: 26	/* ETH_P_ARP */
[   22.804392] tag_ops->flow_dissect()
[   22.807921] Tx: proto: 0x920b, nhoff: 34	/* junk */

[   16.898342] Tx: proto: 0x86dd, nhoff: 26	/* ETH_P_IPV6 */
[   16.902705] tag_ops->flow_dissect()
[   16.906227] Tx: proto: 0x920b, nhoff: 34	/* junk */

After:

Rx path (RPS):

[   16.520993] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
[   16.525260] tag_ops->flow_dissect()
[   16.528808] Rx: proto: 0x0800, nhoff: 8	/* ETH_P_IP */

[   15.484807] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
[   15.490417] tag_ops->flow_dissect()
[   15.495223] Rx: proto: 0x0806, nhoff: 8	/* ETH_P_ARP */

[   17.134621] Rx: proto: 0x00f8, nhoff: 0	/* ETH_P_XDSA */
[   17.138895] tag_ops->flow_dissect()
[   17.142388] Rx: proto: 0x8100, nhoff: 8	/* ETH_P_8021Q */

Tx path (UP system):

[   15.499558] Tx: proto: 0x0800, nhoff: 26	/* ETH_P_IP */

[   20.664689] Tx: proto: 0x0806, nhoff: 26	/* ETH_P_ARP */

[   18.565782] Tx: proto: 0x86dd, nhoff: 26	/* ETH_P_IPV6 */

In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)' to prevent code from calling tag_ops->flow_dissect() on Tx. I also decided to initialize 'offset' variable so tagger callbacks can now safely leave it untouched without provoking a chaos.

---
 net/core/flow_dissector.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -853,9 +853,10 @@ bool __skb_flow_dissect(const struct net
 		nhoff = skb_network_offset(skb);
 		hlen = skb_headlen(skb);
 #if IS_ENABLED(CONFIG_NET_DSA)
-		if (unlikely(skb->dev && netdev_uses_dsa(skb->dev))) {
+		if (unlikely(skb->dev && netdev_uses_dsa(skb->dev) &&
+			     proto == htons(ETH_P_XDSA))) {
 			const struct dsa_device_ops *ops;
-			int offset;
+			int offset = 0;
 
 			ops = skb->dev->dsa_ptr->tag_ops;
 			if (ops->flow_dissect &&

From: Grygorii Strashko <[email protected]>

[ Upstream commit 51302f77bedab8768b761ed1899c08f89af9e4e2 ]

Now RX interrupt is triggered twice every time, because in cpsw_rx_interrupt() it is asked first and then disabled. So there will be pending interrupt always, when RX interrupt is enabled again in NAPI handler.

Fix it by first disabling IRQ and then do ask.

---
 drivers/net/ethernet/ti/cpsw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -890,8 +890,8 @@ static irqreturn_t cpsw_rx_interrupt(int
 {
 	struct cpsw_common *cpsw = dev_id;
 
-	cpdma_ctlr_eoi(cpsw->dma, CPDMA_EOI_RX);
 	writel(0, &cpsw->wr_regs->rx_en);
+	cpdma_ctlr_eoi(cpsw->dma, CPDMA_EOI_RX);
 
 	if (cpsw->quirk_irq) {
 		disable_irq_nosync(cpsw->irqs_table[0]);

From: Dust Li <[email protected]>

[ Upstream commit 2f23cd42e19c22c24ff0e221089b7b6123b117c5 ]

sch->q.len hasn't been set if the subqueue is a NOLOCK qdisc
in mq_dump() and mqprio_dump().

---
 net/sched/sch_mq.c     |    1 +
 net/sched/sch_mqprio.c |    1 +
 2 files changed, 2 insertions(+)

@@ -153,6 +153,7 @@ static int mq_dump(struct Qdisc *sch, st
 			__gnet_stats_copy_queue(&sch->qstats,
 						qdisc->cpu_qstats,
 						&qdisc->qstats, qlen);
+			sch->q.qlen		+= qlen;
 		} else {
 			sch->q.qlen		+= qdisc->q.qlen;
 			sch->bstats.bytes	+= qdisc->bstats.bytes;

@@ -411,6 +411,7 @@ static int mqprio_dump(struct Qdisc *sch
 			__gnet_stats_copy_queue(&sch->qstats,
 						qdisc->cpu_qstats,
 						&qdisc->qstats, qlen);
+			sch->q.qlen		+= qlen;
 		} else {
 			sch->q.qlen		+= qdisc->q.qlen;
 			sch->bstats.bytes	+= qdisc->bstats.bytes;

From: Jouni Hogander <[email protected]>

[ Upstream commit e0b60903b434a7ee21ba8d8659f207ed84101e89 ]

Dev_hold has to be called always in netdev_queue_add_kobject. Otherwise usage count drops below 0 in case of failure in kobject_init_and_add.

---
 net/core/net-sysfs.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

@@ -1457,14 +1457,17 @@ static int netdev_queue_add_kobject(stru
 	struct kobject *kobj = &queue->kobj;
 	int error = 0;
 
+	/* Kobject_put later will trigger netdev_queue_release call
+	 * which decreases dev refcount: Take that reference here
+	 */
+	dev_hold(queue->dev);
+
 	kobj->kset = dev->queues_kset;
 	error = kobject_init_and_add(kobj, &netdev_queue_ktype, NULL,
 				     "tx-%u", index);
 	if (error)
 		return error;
 
-	dev_hold(queue->dev);
-
 #ifdef CONFIG_BQL
 	error = sysfs_create_group(kobj, &dql_group);
 	if (error) {

From: Mian Yousaf Kaukab <[email protected]>

[ Upstream commit a350d2e7adbb57181d33e3aa6f0565632747feaa ]

Since commit 2b3e88ea6528 ("net: phy: improve phy state checking") phy_start_aneg() expects phy state to be >= PHY_UP. Call phy_start() before calling phy_start_aneg() during probe so that autonegotiation is initiated.

As phy_start() takes care of calling phy_start_aneg(), drop the explicit call to phy_start_aneg().

Network fails without this patch on Octeon TX.

---
 drivers/net/ethernet/cavium/thunder/thunder_bgx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1115,7 +1115,7 @@ static int bgx_lmac_enable(struct bgx *b
 				       phy_interface_mode(lmac->lmac_type)))
 			return -ENODEV;
 
-		phy_start_aneg(lmac->phydev);
+		phy_start(lmac->phydev);
 		return 0;
 	}
 

From: Valentin Vidic <[email protected]>

[ Upstream commit 4a5cdc604b9cf645e6fa24d8d9f055955c3c8516 ]

ENOTSUPP is not available in userspace, for example:

setsockopt failed, 524, Unknown error 524

---
 net/tls/tls_device.c              |    8 ++++----
 net/tls/tls_main.c                |    4 ++--
 net/tls/tls_sw.c                  |    8 ++++----
 tools/testing/selftests/net/tls.c |    8 ++------
 4 files changed, 12 insertions(+), 16 deletions(-)

@@ -385,7 +385,7 @@ static int tls_push_data(struct sock *sk
 
 	if (flags &
 	    ~(MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL | MSG_SENDPAGE_NOTLAST))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (sk->sk_err)
 		return -sk->sk_err;

@@ -519,7 +519,7 @@ int tls_device_sendpage(struct sock *sk,
 	lock_sock(sk);
 
 	if (flags & MSG_OOB) {
-		rc = -ENOTSUPP;
+		rc = -EOPNOTSUPP;
 		goto out;
 	}
 

@@ -961,7 +961,7 @@ int tls_set_device_offload(struct sock *
 	}
 
 	if (!(netdev->features & NETIF_F_HW_TLS_TX)) {
-		rc = -ENOTSUPP;
+		rc = -EOPNOTSUPP;
 		goto release_netdev;
 	}
 

@@ -1034,7 +1034,7 @@ int tls_set_device_offload_rx(struct soc
 	}
 
 	if (!(netdev->features & NETIF_F_HW_TLS_RX)) {
-		rc = -ENOTSUPP;
+		rc = -EOPNOTSUPP;
 		goto release_netdev;
 	}
 

@@ -473,7 +473,7 @@ static int do_tls_setsockopt_conf(struct
 	/* check version */
 	if (crypto_info->version != TLS_1_2_VERSION &&
 	    crypto_info->version != TLS_1_3_VERSION) {
-		rc = -ENOTSUPP;
+		rc = -EINVAL;
 		goto err_crypto_info;
 	}
 

@@ -782,7 +782,7 @@ static int tls_init(struct sock *sk)
 	 * share the ulp context.
 	 */
 	if (sk->sk_state != TCP_ESTABLISHED)
-		return -ENOTSUPP;
+		return -ENOTCONN;
 
 	tls_build_proto(sk);
 

@@ -900,7 +900,7 @@ int tls_sw_sendmsg(struct sock *sk, stru
 	int ret = 0;
 
 	if (msg->msg_flags & ~(MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	mutex_lock(&tls_ctx->tx_lock);
 	lock_sock(sk);

@@ -1215,7 +1215,7 @@ int tls_sw_sendpage_locked(struct sock *
 	if (flags & ~(MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL |
 		      MSG_SENDPAGE_NOTLAST | MSG_SENDPAGE_NOPOLICY |
 		      MSG_NO_SHARED_FRAGS))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	return tls_sw_do_sendpage(sk, page, offset, size, flags);
 }

@@ -1228,7 +1228,7 @@ int tls_sw_sendpage(struct sock *sk, str
 
 	if (flags & ~(MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL |
 		      MSG_SENDPAGE_NOTLAST | MSG_SENDPAGE_NOPOLICY))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	mutex_lock(&tls_ctx->tx_lock);
 	lock_sock(sk);

@@ -1928,7 +1928,7 @@ ssize_t tls_sw_splice_read(struct socket
 
 		/* splice does not support reading control messages */
 		if (ctx->control != TLS_RECORD_TYPE_DATA) {
-			err = -ENOTSUPP;
+			err = -EINVAL;
 			goto splice_read_end;
 		}
 

@@ -25,10 +25,6 @@
 #define TLS_PAYLOAD_MAX_LEN 16384
 #define SOL_TLS 282
 
-#ifndef ENOTSUPP
-#define ENOTSUPP 524
-#endif
-
 FIXTURE(tls_basic)
 {
 	int fd, cfd;

@@ -1205,11 +1201,11 @@ TEST(non_established) {
 	/* TLS ULP not supported */
 	if (errno == ENOENT)
 		return;
-	EXPECT_EQ(errno, ENOTSUPP);
+	EXPECT_EQ(errno, ENOTCONN);
 
 	ret = setsockopt(sfd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
 	EXPECT_EQ(ret, -1);
-	EXPECT_EQ(errno, ENOTSUPP);
+	EXPECT_EQ(errno, ENOTCONN);
 
 	ret = getsockname(sfd, &addr, &len);
 	ASSERT_EQ(ret, 0);

From: Aaron Conole <[email protected]>

[ Upstream commit 5d50aa83e2c8e91ced2cca77c198b468ca9210f4 ]

The openvswitch module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The openvswitch module doesn't have such capability.

Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry.

---
 net/openvswitch/conntrack.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

@@ -903,6 +903,17 @@ static int ovs_ct_nat(struct net *net, s
 	}
 	err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range, maniptype);
 
+	if (err == NF_ACCEPT &&
+	    ct->status & IPS_SRC_NAT && ct->status & IPS_DST_NAT) {
+		if (maniptype == NF_NAT_MANIP_SRC)
+			maniptype = NF_NAT_MANIP_DST;
+		else
+			maniptype = NF_NAT_MANIP_SRC;
+
+		err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range,
+					 maniptype);
+	}
+
 	/* Mark NAT done if successful and update the flow key. */
 	if (err == NF_ACCEPT)
 		ovs_nat_update_key(key, skb, maniptype);

From: Eric Dumazet <[email protected]>

[ Upstream commit 9424e2e7ad93ffffa88f882c9bc5023570904b55 ]

Back in 2008, Adam Langley fixed the corner case of packets for flows having all of the following options : MD5 TS SACK

Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block can be cooked from the remaining 8 bytes.

tcp_established_options() correctly sets opts->num_sack_blocks to zero, but returns 36 instead of 32.

This means TCP cooks packets with 4 extra bytes at the end of options, containing unitialized bytes.

---
 net/ipv4/tcp_output.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -755,8 +755,9 @@ static unsigned int tcp_established_opti
 			min_t(unsigned int, eff_sacks,
 			      (remaining - TCPOLEN_SACK_BASE_ALIGNED) /
 			      TCPOLEN_SACK_PERBLOCK);
-		size += TCPOLEN_SACK_BASE_ALIGNED +
-			opts->num_sack_blocks * TCPOLEN_SACK_PERBLOCK;
+		if (likely(opts->num_sack_blocks))
+			size += TCPOLEN_SACK_BASE_ALIGNED +
+				opts->num_sack_blocks * TCPOLEN_SACK_PERBLOCK;
 	}
 
 	return size;

From: Taehee Yoo <[email protected]>

[ Upstream commit 9cf1cd8ee3ee09ef2859017df2058e2f53c5347f ]

In order to set/get/dump, the tipc uses the generic netlink infrastructure. So, when tipc module is inserted, init function calls genl_register_family().
After genl_register_family(), set/get/dump commands are immediately allowed and these callbacks internally use the net_generic. net_generic is allocated by register_pernet_device() but this is called after genl_register_family() in the __init function. So, these callbacks would use un-initialized net_generic.

Test commands:
#SHELL1
while :
do
modprobe tipc
modprobe -rv tipc
done

#SHELL2
while :
do
tipc link list
done

Splat looks like:

[   59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled
[   59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access
[   59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194
[   59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc]
[   59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00
[   59.622550][ T2780] NET: Registered protocol family 30
[   59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202
[   59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907
[   59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149
[   59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1
[   59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40
[   59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328
[   59.624639][ T2788] FS:  00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[   59.624645][ T2788] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   59.625875][ T2780] tipc: Started in single node mode
[   59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0
[   59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   59.636478][ T2788] Call Trace:
[   59.637025][ T2788]  tipc_nl_add_bc_link+0x179/0x1470 [tipc]
[   59.638219][ T2788]  ? lock_downgrade+0x6e0/0x6e0
[   59.638923][ T2788]  ? __tipc_nl_add_link+0xf90/0xf90 [tipc]
[   59.639533][ T2788]  ? tipc_nl_node_dump_link+0x318/0xa50 [tipc]
[   59.640160][ T2788]  ? mutex_lock_io_nested+0x1380/0x1380
[   59.640746][ T2788]  tipc_nl_node_dump_link+0x4fd/0xa50 [tipc]
[   59.641356][ T2788]  ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc]
[   59.642088][ T2788]  ? __skb_ext_del+0x270/0x270
[   59.642594][ T2788]  genl_lock_dumpit+0x85/0xb0
[   59.643050][ T2788]  netlink_dump+0x49c/0xed0
[   59.643529][ T2788]  ? __netlink_sendskb+0xc0/0xc0
[   59.644044][ T2788]  ? __netlink_dump_start+0x190/0x800
[   59.644617][ T2788]  ? __mutex_unlock_slowpath+0xd0/0x670
[   59.645177][ T2788]  __netlink_dump_start+0x5a0/0x800
[   59.645692][ T2788]  genl_rcv_msg+0xa75/0xe90
[   59.646144][ T2788]  ? __lock_acquire+0xdfe/0x3de0
[   59.646692][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.647340][ T2788]  ? genl_lock_dumpit+0xb0/0xb0
[   59.647821][ T2788]  ? genl_unlock+0x20/0x20
[   59.648290][ T2788]  ? genl_parallel_done+0xe0/0xe0
[   59.648787][ T2788]  ? find_held_lock+0x39/0x1d0
[   59.649276][ T2788]  ? genl_rcv+0x15/0x40
[   59.649722][ T2788]  ? lock_contended+0xcd0/0xcd0
[   59.650296][ T2788]  netlink_rcv_skb+0x121/0x350
[   59.650828][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.651491][ T2788]  ? netlink_ack+0x940/0x940
[   59.651953][ T2788]  ? lock_acquire+0x164/0x3b0
[   59.652449][ T2788]  genl_rcv+0x24/0x40
[   59.652841][ T2788]  netlink_unicast+0x421/0x600

[ ... ]

---
 net/tipc/core.c |   29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

@@ -122,14 +122,6 @@ static int __init tipc_init(void)
 	sysctl_tipc_rmem[1] = RCVBUF_DEF;
 	sysctl_tipc_rmem[2] = RCVBUF_MAX;
 
-	err = tipc_netlink_start();
-	if (err)
-		goto out_netlink;
-
-	err = tipc_netlink_compat_start();
-	if (err)
-		goto out_netlink_compat;
-
 	err = tipc_register_sysctl();
 	if (err)
 		goto out_sysctl;

@@ -150,8 +142,21 @@ static int __init tipc_init(void)
 	if (err)
 		goto out_bearer;
 
+	err = tipc_netlink_start();
+	if (err)
+		goto out_netlink;
+
+	err = tipc_netlink_compat_start();
+	if (err)
+		goto out_netlink_compat;
+
 	pr_info("Started in single node mode\n");
 	return 0;
+
+out_netlink_compat:
+	tipc_netlink_stop();
+out_netlink:
+	tipc_bearer_cleanup();
 out_bearer:
 	unregister_pernet_device(&tipc_topsrv_net_ops);
 out_pernet_topsrv:

@@ -161,22 +166,18 @@ out_socket:
 out_pernet:
 	tipc_unregister_sysctl();
 out_sysctl:
-	tipc_netlink_compat_stop();
-out_netlink_compat:
-	tipc_netlink_stop();
-out_netlink:
 	pr_err("Unable to start in single node mode\n");
 	return err;
 }
 
 static void __exit tipc_exit(void)
 {
+	tipc_netlink_compat_stop();
+	tipc_netlink_stop();
 	tipc_bearer_cleanup();
 	unregister_pernet_device(&tipc_topsrv_net_ops);
 	tipc_socket_stop();
 	unregister_pernet_device(&tipc_net_ops);
-	tipc_netlink_stop();
-	tipc_netlink_compat_stop();
 	tipc_unregister_sysctl();
 
 	pr_info("Deactivated\n");

From: Huy Nguyen <[email protected]>

[ Upstream commit 73e6551699a32fac703ceea09214d6580edcf2d5 ]

When the user changes prio2buffer mapping while global pause is enabled, mlx5 driver incorrectly sets all active buffers (buffer that has at least one priority mapped) to lossy.

Solution:
If global pause is enabled, set all the active buffers to lossless in prio2buffer command.
Also, add error message when buffer size is not enough to meet xoff threshold.

---
 drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c |   27 +++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

@@ -155,8 +155,11 @@ static int update_xoff_threshold(struct
 		}
 
 		if (port_buffer->buffer[i].size <
-		    (xoff + max_mtu + (1 << MLX5E_BUFFER_CELL_SHIFT)))
+		    (xoff + max_mtu + (1 << MLX5E_BUFFER_CELL_SHIFT))) {
+			pr_err("buffer_size[%d]=%d is not enough for lossless buffer\n",
+			       i, port_buffer->buffer[i].size);
 			return -ENOMEM;
+		}
 
 		port_buffer->buffer[i].xoff = port_buffer->buffer[i].size - xoff;
 		port_buffer->buffer[i].xon  =

@@ -232,6 +235,26 @@ static int update_buffer_lossy(unsigned
 	return 0;
 }
 
+static int fill_pfc_en(struct mlx5_core_dev *mdev, u8 *pfc_en)
+{
+	u32 g_rx_pause, g_tx_pause;
+	int err;
+
+	err = mlx5_query_port_pause(mdev, &g_rx_pause, &g_tx_pause);
+	if (err)
+		return err;
+
+	/* If global pause enabled, set all active buffers to lossless.
+	 * Otherwise, check PFC setting.
+	 */
+	if (g_rx_pause || g_tx_pause)
+		*pfc_en = 0xff;
+	else
+		err = mlx5_query_port_pfc(mdev, pfc_en, NULL);
+
+	return err;
+}
+
 #define MINIMUM_MAX_MTU 9216
 int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
 				    u32 change, unsigned int mtu,

@@ -277,7 +300,7 @@ int mlx5e_port_manual_buffer_config(stru
 
 	if (change & MLX5E_PORT_BUFFER_PRIO2BUFFER) {
 		update_prio2buffer = true;
-		err = mlx5_query_port_pfc(priv->mdev, &curr_pfc_en, NULL);
+		err = fill_pfc_en(priv->mdev, &curr_pfc_en);
 		if (err)
 			return err;
 

From: Sabrina Dubroca <[email protected]>

[ Upstream commit c4e85f73afb6384123e5ef1bba3315b2e3ad031e ]

This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument").

---
 include/net/ipv6.h               |    2 +-
 net/dccp/ipv6.c                  |    6 +++---
 net/ipv6/af_inet6.c              |    2 +-
 net/ipv6/datagram.c              |    2 +-
 net/ipv6/inet6_connection_sock.c |    4 ++--
 net/ipv6/ip6_output.c            |    8 ++++----
 net/ipv6/raw.c                   |    2 +-
 net/ipv6/syncookies.c            |    2 +-
 net/ipv6/tcp_ipv6.c              |    4 ++--
 net/l2tp/l2tp_ip6.c              |    2 +-
 net/sctp/ipv6.c                  |    4 ++--
 11 files changed, 19 insertions(+), 19 deletions(-)

@@ -1017,7 +1017,7 @@ static inline struct sk_buff *ip6_finish
 
 int ip6_dst_lookup(struct net *net, struct sock *sk, struct dst_entry **dst,
 		   struct flowi6 *fl6);
-struct dst_entry *ip6_dst_lookup_flow(const struct sock *sk, struct flowi6 *fl6,
+struct dst_entry *ip6_dst_lookup_flow(struct net *net, const struct sock *sk, struct flowi6 *fl6,
 				      const struct in6_addr *final_dst);
 struct dst_entry *ip6_sk_dst_lookup_flow(struct sock *sk, struct flowi6 *fl6,
 					 const struct in6_addr *final_dst,

@@ -210,7 +210,7 @@ static int dccp_v6_send_response(const s
 	final_p = fl6_update_dst(&fl6, rcu_dereference(np->opt), &final);
 	rcu_read_unlock();
 
-	dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+	dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
 	if (IS_ERR(dst)) {
 		err = PTR_ERR(dst);
 		dst = NULL;

@@ -281,7 +281,7 @@ static void dccp_v6_ctl_send_reset(const
 	security_skb_classify_flow(rxskb, flowi6_to_flowi(&fl6));
 
 	/* sk = NULL, but it is safe for now. RST socket required. */
-	dst = ip6_dst_lookup_flow(ctl_sk, &fl6, NULL);
+	dst = ip6_dst_lookup_flow(sock_net(ctl_sk), ctl_sk, &fl6, NULL);
 	if (!IS_ERR(dst)) {
 		skb_dst_set(skb, dst);
 		ip6_xmit(ctl_sk, skb, &fl6, 0, NULL, 0);

@@ -911,7 +911,7 @@ static int dccp_v6_connect(struct sock *
 	opt = rcu_dereference_protected(np->opt, lockdep_sock_is_held(sk));
 	final_p = fl6_update_dst(&fl6, opt, &final);
 
-	dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+	dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
 	if (IS_ERR(dst)) {
 		err = PTR_ERR(dst);
 		goto failure;

@@ -765,7 +765,7 @@ int inet6_sk_rebuild_header(struct sock
 					 &final);
 		rcu_read_unlock();
 
-		dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+		dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
 		if (IS_ERR(dst)) {
 			sk->sk_route_caps = 0;
 			sk->sk_err_soft = -PTR_ERR(dst);

@@ -85,7 +85,7 @@ int ip6_datagram_dst_update(struct sock
 	final_p = fl6_update_dst(&fl6, opt, &final);
 	rcu_read_unlock();
 
-	dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+	dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
 	if (IS_ERR(dst)) {
 		err = PTR_ERR(dst);
 		goto out;

@@ -48,7 +48,7 @@ struct dst_entry *inet6_csk_route_req(co
 	fl6->flowi6_uid = sk->sk_uid;
 	security_req_classify_flow(req, flowi6_to_flowi(fl6));
 
-	dst = ip6_dst_lookup_flow(sk, fl6, final_p);
+	dst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_p);
 	if (IS_ERR(dst))
 		return NULL;
 

@@ -103,7 +103,7 @@ static struct dst_entry *inet6_csk_route
 
 	dst = __inet6_csk_dst_check(sk, np->dst_cookie);
 	if (!dst) {
-		dst = ip6_dst_lookup_flow(sk, fl6, final_p);
+		dst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_p);
 
 		if (!IS_ERR(dst))
 			ip6_dst_store(sk, dst, NULL, NULL);

@@ -1144,19 +1144,19 @@ EXPORT_SYMBOL_GPL(ip6_dst_lookup);
  *	It returns a valid dst pointer on success, or a pointer encoded
  *	error code.
  */
-struct dst_entry *ip6_dst_lookup_flow(const struct sock *sk, struct flowi6 *fl6,
+struct dst_entry *ip6_dst_lookup_flow(struct net *net, const struct sock *sk, struct flowi6 *fl6,
 				      const struct in6_addr *final_dst)
 {
 	struct dst_entry *dst = NULL;
 	int err;
 
-	err = ip6_dst_lookup_tail(sock_net(sk), sk, &dst, fl6);
+	err = ip6_dst_lookup_tail(net, sk, &dst, fl6);
 	if (err)
 		return ERR_PTR(err);
 	if (final_dst)
 		fl6->daddr = *final_dst;
 
-	return xfrm_lookup_route(sock_net(sk), dst, flowi6_to_flowi(fl6), sk, 0);
+	return xfrm_lookup_route(net, dst, flowi6_to_flowi(fl6), sk, 0);
 }
 EXPORT_SYMBOL_GPL(ip6_dst_lookup_flow);
 

@@ -1188,7 +1188,7 @@ struct dst_entry *ip6_sk_dst_lookup_flow
 	if (dst)
 		return dst;
 
-	dst = ip6_dst_lookup_flow(sk, fl6, final_dst);
+	dst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_dst);
 	if (connected && !IS_ERR(dst))
 		ip6_sk_dst_store_flow(sk, dst_clone(dst), fl6);
 

@@ -923,7 +923,7 @@ static int rawv6_sendmsg(struct sock *sk
 
 	fl6.flowlabel = ip6_make_flowinfo(ipc6.tclass, fl6.flowlabel);
 
-	dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+	dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
 	if (IS_ERR(dst)) {
 		err = PTR_ERR(dst);
 		goto out;

@@ -235,7 +235,7 @@ struct sock *cookie_v6_check(struct sock
 		fl6.flowi6_uid = sk->sk_uid;
 		security_req_classify_flow(req, flowi6_to_flowi(&fl6));
 
-		dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+		dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
 		if (IS_ERR(dst))
 			goto out_free;
 	}

@@ -275,7 +275,7 @@ static int tcp_v6_connect(struct sock *s
 
 	security_sk_classify_flow(sk, flowi6_to_flowi(&fl6));
 
-	dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+	dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
 	if (IS_ERR(dst)) {
 		err = PTR_ERR(dst);
 		goto failure;

@@ -904,7 +904,7 @@ static void tcp_v6_send_response(const s
 	 * Underlying function will use this to retrieve the network
 	 * namespace
 	 */
-	dst = ip6_dst_lookup_flow(ctl_sk, &fl6, NULL);
+	dst = ip6_dst_lookup_flow(sock_net(ctl_sk), ctl_sk, &fl6, NULL);
 	if (!IS_ERR(dst)) {
 		skb_dst_set(buff, dst);
 		ip6_xmit(ctl_sk, buff, &fl6, fl6.flowi6_mark, NULL, tclass);

@@ -615,7 +615,7 @@ static int l2tp_ip6_sendmsg(struct sock
 
 	fl6.flowlabel = ip6_make_flowinfo(ipc6.tclass, fl6.flowlabel);
 
-	dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+	dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
 	if (IS_ERR(dst)) {
 		err = PTR_ERR(dst);
 		goto out;

@@ -275,7 +275,7 @@ static void sctp_v6_get_dst(struct sctp_
 	final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
 	rcu_read_unlock();
 
-	dst = ip6_dst_lookup_flow(sk, fl6, final_p);
+	dst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_p);
 	if (!asoc || saddr)
 		goto out;
 

@@ -328,7 +328,7 @@ static void sctp_v6_get_dst(struct sctp_
 		fl6->saddr = laddr->a.v6.sin6_addr;
 		fl6->fl6_sport = laddr->a.v6.sin6_port;
 		final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
-		bdst = ip6_dst_lookup_flow(sk, fl6, final_p);
+		bdst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_p);
 
 		if (IS_ERR(bdst))
 			continue;

From: Sabrina Dubroca <[email protected]>

[ Upstream commit 6c8991f41546c3c472503dff1ea9daaddf9331c2 ]

ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely.

All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route().

This requires some changes in all the callers, as these two functions take different arguments and have different return types.

---
 drivers/infiniband/core/addr.c                      |    7 +++----
 drivers/infiniband/sw/rxe/rxe_net.c                 |    8 +++++---
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c |    8 ++++----
 drivers/net/geneve.c                                |    4 +++-
 drivers/net/vxlan.c                                 |    8 +++-----
 include/net/ipv6_stubs.h                            |    6 ++++--
 net/core/lwt_bpf.c                                  |    4 +---
 net/ipv6/addrconf_core.c                            |   11 ++++++-----
 net/ipv6/af_inet6.c                                 |    2 +-
 net/mpls/af_mpls.c                                  |    7 +++----
 net/tipc/udp_media.c                                |    9 ++++++---
 11 files changed, 39 insertions(+), 35 deletions(-)

@@ -421,16 +421,15 @@ static int addr6_resolve(struct sockaddr
 				(const struct sockaddr_in6 *)dst_sock;
 	struct flowi6 fl6;
 	struct dst_entry *dst;
-	int ret;
 
 	memset(&fl6, 0, sizeof fl6);
 	fl6.daddr = dst_in->sin6_addr;
 	fl6.saddr = src_in->sin6_addr;
 	fl6.flowi6_oif = addr->bound_dev_if;
 
-	ret = ipv6_stub->ipv6_dst_lookup(addr->net, NULL, &dst, &fl6);
-	if (ret < 0)
-		return ret;
+	dst = ipv6_stub->ipv6_dst_lookup_flow(addr->net, NULL, &fl6, NULL);
+	if (IS_ERR(dst))
+		return PTR_ERR(dst);
 
 	if (ipv6_addr_any(&src_in->sin6_addr))
 		src_in->sin6_addr = fl6.saddr;

@@ -117,10 +117,12 @@ static struct dst_entry *rxe_find_route6
 	memcpy(&fl6.daddr, daddr, sizeof(*daddr));
 	fl6.flowi6_proto = IPPROTO_UDP;
 
-	if (unlikely(ipv6_stub->ipv6_dst_lookup(sock_net(recv_sockets.sk6->sk),
-						recv_sockets.sk6->sk, &ndst, &fl6))) {
+	ndst = ipv6_stub->ipv6_dst_lookup_flow(sock_net(recv_sockets.sk6->sk),
+					       recv_sockets.sk6->sk, &fl6,
+					       NULL);
+	if (unlikely(IS_ERR(ndst))) {
 		pr_err_ratelimited("no route to %pI6\n", daddr);
-		goto put;
+		return NULL;
 	}
 
 	if (unlikely(ndst->error)) {

@@ -137,10 +137,10 @@ static int mlx5e_route_lookup_ipv6(struc
 #if IS_ENABLED(CONFIG_INET) && IS_ENABLED(CONFIG_IPV6)
 	int ret;
 
-	ret = ipv6_stub->ipv6_dst_lookup(dev_net(mirred_dev), NULL, &dst,
-					 fl6);
-	if (ret < 0)
-		return ret;
+	dst = ipv6_stub->ipv6_dst_lookup_flow(dev_net(mirred_dev), NULL, fl6,
+					      NULL);
+	if (IS_ERR(dst))
+		return PTR_ERR(dst);
 
 	if (!(*out_ttl))
 		*out_ttl = ip6_dst_hoplimit(dst);

@@ -853,7 +853,9 @@ static struct dst_entry *geneve_get_v6_d
 		if (dst)
 			return dst;
 	}
-	if (ipv6_stub->ipv6_dst_lookup(geneve->net, gs6->sock->sk, &dst, fl6)) {
+	dst = ipv6_stub->ipv6_dst_lookup_flow(geneve->net, gs6->sock->sk, fl6,
+					      NULL);
+	if (IS_ERR(dst)) {
 		netdev_dbg(dev, "no route to %pI6\n", &fl6->daddr);
 		return ERR_PTR(-ENETUNREACH);
 	}

@@ -2276,7 +2276,6 @@ static struct dst_entry *vxlan6_get_rout
 	bool use_cache = ip_tunnel_dst_cache_usable(skb, info);
 	struct dst_entry *ndst;
 	struct flowi6 fl6;
-	int err;
 
 	if (!sock6)
 		return ERR_PTR(-EIO);

@@ -2299,10 +2298,9 @@ static struct dst_entry *vxlan6_get_rout
 	fl6.fl6_dport = dport;
 	fl6.fl6_sport = sport;
 
-	err = ipv6_stub->ipv6_dst_lookup(vxlan->net,
-					 sock6->sock->sk,
-					 &ndst, &fl6);
-	if (unlikely(err < 0)) {
+	ndst = ipv6_stub->ipv6_dst_lookup_flow(vxlan->net, sock6->sock->sk,
+					       &fl6, NULL);
+	if (unlikely(IS_ERR(ndst))) {
 		netdev_dbg(dev, "no route to %pI6\n", daddr);
 		return ERR_PTR(-ENETUNREACH);
 	}

@@ -24,8 +24,10 @@ struct ipv6_stub {
 				 const struct in6_addr *addr);
 	int (*ipv6_sock_mc_drop)(struct sock *sk, int ifindex,
 				 const struct in6_addr *addr);
-	int (*ipv6_dst_lookup)(struct net *net, struct sock *sk,
-			       struct dst_entry **dst, struct flowi6 *fl6);
+	struct dst_entry *(*ipv6_dst_lookup_flow)(struct net *net,
+						  const struct sock *sk,
+						  struct flowi6 *fl6,
+						  const struct in6_addr *final_dst);
 	int (*ipv6_route_input)(struct sk_buff *skb);
 
 	struct fib6_table *(*fib6_get_table)(struct net *net, u32 id);

@@ -230,9 +230,7 @@ static int bpf_lwt_xmit_reroute(struct s
 		fl6.daddr = iph6->daddr;
 		fl6.saddr = iph6->saddr;
 
-		err = ipv6_stub->ipv6_dst_lookup(net, skb->sk, &dst, &fl6);
-		if (unlikely(err))
-			goto err;
+		dst = ipv6_stub->ipv6_dst_lookup_flow(net, skb->sk, &fl6, NULL);
 		if (IS_ERR(dst)) {
 			err = PTR_ERR(dst);
 			goto err;

@@ -128,11 +128,12 @@ int inet6addr_validator_notifier_call_ch
 }
 EXPORT_SYMBOL(inet6addr_validator_notifier_call_chain);
 
-static int eafnosupport_ipv6_dst_lookup(struct net *net, struct sock *u1,
-					struct dst_entry **u2,
-					struct flowi6 *u3)
+static struct dst_entry *eafnosupport_ipv6_dst_lookup_flow(struct net *net,
+							   const struct sock *sk,
+							   struct flowi6 *fl6,
+							   const struct in6_addr *final_dst)
 {
-	return -EAFNOSUPPORT;
+	return ERR_PTR(-EAFNOSUPPORT);
 }
 
 static int eafnosupport_ipv6_route_input(struct sk_buff *skb)

@@ -189,7 +190,7 @@ static int eafnosupport_ip6_del_rt(struc
 }
 
 const struct ipv6_stub *ipv6_stub __read_mostly = &(struct ipv6_stub) {
-	.ipv6_dst_lookup   = eafnosupport_ipv6_dst_lookup,
+	.ipv6_dst_lookup_flow = eafnosupport_ipv6_dst_lookup_flow,
 	.ipv6_route_input  = eafnosupport_ipv6_route_input,
 	.fib6_get_table    = eafnosupport_fib6_get_table,
 	.fib6_table_lookup = eafnosupport_fib6_table_lookup,

@@ -946,7 +946,7 @@ static int ipv6_route_input(struct sk_bu
 static const struct ipv6_stub ipv6_stub_impl = {
 	.ipv6_sock_mc_join = ipv6_sock_mc_join,
 	.ipv6_sock_mc_drop = ipv6_sock_mc_drop,
-	.ipv6_dst_lookup   = ip6_dst_lookup,
+	.ipv6_dst_lookup_flow = ip6_dst_lookup_flow,
 	.ipv6_route_input  = ipv6_route_input,
 	.fib6_get_table	   = fib6_get_table,
 	.fib6_table_lookup = fib6_table_lookup,

@@ -617,16 +617,15 @@ static struct net_device *inet6_fib_look
 	struct net_device *dev;
 	struct dst_entry *dst;
 	struct flowi6 fl6;
-	int err;
 
 	if (!ipv6_stub)
 		return ERR_PTR(-EAFNOSUPPORT);
 
 	memset(&fl6, 0, sizeof(fl6));
 	memcpy(&fl6.daddr, addr, sizeof(struct in6_addr));
-	err = ipv6_stub->ipv6_dst_lookup(net, NULL, &dst, &fl6);
-	if (err)
-		return ERR_PTR(err);
+	dst = ipv6_stub->ipv6_dst_lookup_flow(net, NULL, &fl6, NULL);
+	if (IS_ERR(dst))
+		return ERR_CAST(dst);
 
 	dev = dst->dev;
 	dev_hold(dev);

@@ -195,10 +195,13 @@ static int tipc_udp_xmit(struct net *net
 				.saddr = src->ipv6,
 				.flowi6_proto = IPPROTO_UDP
 			};
-			err = ipv6_stub->ipv6_dst_lookup(net, ub->ubsock->sk,
-							 &ndst, &fl6);
-			if (err)
+			ndst = ipv6_stub->ipv6_dst_lookup_flow(net,
+							       ub->ubsock->sk,
+							       &fl6, NULL);
+			if (IS_ERR(ndst)) {
+				err = PTR_ERR(ndst);
 				goto tx_error;
+			}
 			dst_cache_set_ip6(cache, ndst, &fl6.saddr);
 		}
 		ttl = ip6_dst_hoplimit(ndst);

From: Guillaume Nault <[email protected]>

[ Upstream commit 04d26e7b159a396372646a480f4caa166d1b6720 ]

If no synflood happens for a long enough period of time, then the synflood timestamp isn't refreshed and jiffies can advance so much that time_after32() can't accurately compare them any more.

Therefore, we can end up in a situation where time_after32(now, last_overflow + HZ) returns false, just because these two values are too far apart. In that case, the synflood timestamp isn't updated as it should be, which can trick tcp_synq_no_recent_overflow() into rejecting valid syncookies.

For example, let's consider the following scenario on a system with HZ=1000:

* The synflood timestamp is 0, either because that's the timestamp of the last synflood or, more commonly, because we're working with a freshly created socket.

* We receive a new SYN, which triggers synflood protection. Let's say

    that this happens when jiffies == 2147484649 (that is,
    'synflood timestamp' + HZ + 2^31 + 1).

* Then tcp_synq_overflow() doesn't update the synflood timestamp, because time_after32(2147484649, 1000) returns false. With:
- 2147484649: the value of jiffies, aka. 'now'.
- 1000: the value of 'last_overflow' + HZ.

* A bit later, we receive the ACK completing the 3WHS. But cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow() says that we're not under synflood. That's because time_after32(2147484649, 120000) returns false.
With:
- 2147484649: the value of jiffies, aka. 'now'.
- 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID.

Of course, in reality jiffies would have increased a bit, but this condition will last for the next 119 seconds, which is far enough to accommodate for jiffie's growth.

Fix this by updating the overflow timestamp whenever jiffies isn't within the [last_overflow, last_overflow + HZ] range. That shouldn't have any performance impact since the update still happens at most once per second.

Now we're guaranteed to have fresh timestamps while under synflood, so tcp_synq_no_recent_overflow() can safely use it with time_after32() in such situations.

Stale timestamps can still make tcp_synq_no_recent_overflow() return the wrong verdict when not under synflood. This will be handled in the next patch.

For 64 bits architectures, the problem was introduced with the conversion of ->tw_ts_recent_stamp to 32 bits integer by commit cca9bab1b72c ("tcp: use monotonic timestamps for PAWS"). The problem has always been there on 32 bits architectures.

---
 include/linux/time.h |   13 +++++++++++++
 include/net/tcp.h    |    5 +++--
 2 files changed, 16 insertions(+), 2 deletions(-)

@@ -96,4 +96,17 @@ static inline bool itimerspec64_valid(co
  */
 #define time_after32(a, b)	((s32)((u32)(b) - (u32)(a)) < 0)
 #define time_before32(b, a)	time_after32(a, b)
+
+/**
+ * time_between32 - check if a 32-bit timestamp is within a given time range
+ * @t:	the time which may be within [l,h]
+ * @l:	the lower bound of the range
+ * @h:	the higher bound of the range
+ *
+ * time_before32(t, l, h) returns true if @l <= @t <= @h. All operands are
+ * treated as 32-bit integers.
+ *
+ * Equivalent to !(time_before32(@t, @l) || time_after32(@t, @h)).
+ */
+#define time_between32(t, l, h) ((u32)(h) - (u32)(l) >= (u32)(t) - (u32)(l))
 #endif

@@ -484,14 +484,15 @@ static inline void tcp_synq_overflow(con
 		reuse = rcu_dereference(sk->sk_reuseport_cb);
 		if (likely(reuse)) {
 			last_overflow = READ_ONCE(reuse->synq_overflow_ts);
-			if (time_after32(now, last_overflow + HZ))
+			if (!time_between32(now, last_overflow,
+					    last_overflow + HZ))
 				WRITE_ONCE(reuse->synq_overflow_ts, now);
 			return;
 		}
 	}
 
 	last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp;
-	if (time_after32(now, last_overflow + HZ))
+	if (!time_between32(now, last_overflow, last_overflow + HZ))
 		tcp_sk(sk)->rx_opt.ts_recent_stamp = now;
 }
 

From: Guillaume Nault <[email protected]>

[ Upstream commit cb44a08f8647fd2e8db5cc9ac27cd8355fa392d8 ]

When no synflood occurs, the synflood timestamp isn't updated. Therefore it can be so old that time_after32() can consider it to be in the future.

That's a problem for tcp_synq_no_recent_overflow() as it may report that a recent overflow occurred while, in fact, it's just that jiffies has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31.

Spurious detection of recent overflows lead to extra syncookie verification in cookie_v[46]_check(). At that point, the verification should fail and the packet dropped. But we should have dropped the packet earlier as we didn't even send a syncookie.

Let's refine tcp_synq_no_recent_overflow() to report a recent overflow only if jiffies is within the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This way, no spurious recent overflow is reported when jiffies wraps and 'last_overflow' becomes in the future from the point of view of time_after32().

However, if jiffies wraps and enters the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with 'last_overflow' being a stale synflood timestamp), then tcp_synq_no_recent_overflow() still erroneously reports an overflow. In such cases, we have to rely on syncookie verification to drop the packet. We unfortunately have no way to differentiate between a fresh and a stale syncookie timestamp.

In practice, using last_overflow as lower bound is problematic. If the synflood timestamp is concurrently updated between the time we read jiffies and the moment we store the timestamp in 'last_overflow', then 'now' becomes smaller than 'last_overflow' and tcp_synq_no_recent_overflow() returns true, potentially dropping a valid syncookie.

Reading jiffies after loading the timestamp could fix the problem, but that'd require a memory barrier. Let's just accommodate for potential timestamp growth instead and extend the interval using 'last_overflow - HZ' as lower bound.

---
 include/net/tcp.h |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

@@ -508,13 +508,23 @@ static inline bool tcp_synq_no_recent_ov
 		reuse = rcu_dereference(sk->sk_reuseport_cb);
 		if (likely(reuse)) {
 			last_overflow = READ_ONCE(reuse->synq_overflow_ts);
-			return time_after32(now, last_overflow +
-					    TCP_SYNCOOKIE_VALID);
+			return !time_between32(now, last_overflow - HZ,
+					       last_overflow +
+					       TCP_SYNCOOKIE_VALID);
 		}
 	}
 
 	last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp;
-	return time_after32(now, last_overflow + TCP_SYNCOOKIE_VALID);
+
+	/* If last_overflow <= jiffies <= last_overflow + TCP_SYNCOOKIE_VALID,
+	 * then we're under synflood. However, we have to use
+	 * 'last_overflow - HZ' as lower bound. That's because a concurrent
+	 * tcp_synq_overflow() could update .ts_recent_stamp after we read
+	 * jiffies but before we store .ts_recent_stamp into last_overflow,
+	 * which could lead to rejecting a valid syncookie.
+	 */
+	return !time_between32(now, last_overflow - HZ,
+			       last_overflow + TCP_SYNCOOKIE_VALID);
 }
 
 static inline u32 tcp_cookie_time(void)

From: Guillaume Nault <[email protected]>

[ Upstream commit 721c8dafad26ccfa90ff659ee19755e3377b829d ]

Syncookies borrow the ->rx_opt.ts_recent_stamp field to store the timestamp of the last synflood. Protect them with READ_ONCE() and WRITE_ONCE() since reads and writes aren't serialised.

Use of .rx_opt.ts_recent_stamp for storing the synflood timestamp was introduced by a0f82f64e269 ("syncookies: remove last_synq_overflow from struct tcp_sock"). But unprotected accesses were already there when timestamp was stored in .last_synq_overflow.

---
 include/net/tcp.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

@@ -491,9 +491,9 @@ static inline void tcp_synq_overflow(con
 		}
 	}
 
-	last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp;
+	last_overflow = READ_ONCE(tcp_sk(sk)->rx_opt.ts_recent_stamp);
 	if (!time_between32(now, last_overflow, last_overflow + HZ))
-		tcp_sk(sk)->rx_opt.ts_recent_stamp = now;
+		WRITE_ONCE(tcp_sk(sk)->rx_opt.ts_recent_stamp, now);
 }
 
 /* syncookies: no recent synqueue overflow on this listening socket? */

@@ -514,7 +514,7 @@ static inline bool tcp_synq_no_recent_ov
 		}
 	}
 
-	last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp;
+	last_overflow = READ_ONCE(tcp_sk(sk)->rx_opt.ts_recent_stamp);
 
 	/* If last_overflow <= jiffies <= last_overflow + TCP_SYNCOOKIE_VALID,
 	 * then we're under synflood. However, we have to use

From: Cong Wang <[email protected]>

[ Upstream commit 0e4940928c26527ce8f97237fef4c8a91cd34207 ]

After pskb_may_pull() we should always refetch the header pointers from the skb->data in case it got reallocated.

In gre_parse_header(), the erspan header is still fetched from the 'options' pointer which is fetched before pskb_may_pull().

Found this during code review of a KMSAN bug report.

---
 net/ipv4/gre_demux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -127,7 +127,7 @@ int gre_parse_header(struct sk_buff *skb
 		if (!pskb_may_pull(skb, nhs + hdr_len + sizeof(*ershdr)))
 			return -EINVAL;
 
-		ershdr = (struct erspan_base_hdr *)options;
+		ershdr = (struct erspan_base_hdr *)(skb->data + nhs + hdr_len);
 		tpi->key = cpu_to_be32(get_session_id(ershdr));
 	}
 

From: Martin Varghese <[email protected]>

[ Upstream commit 040b5cfbcefa263ccf2c118c4938308606bb7ed8 ]

The skb_mpls_pop was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device.

In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_pop function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet.

recirc_id(0),in_port(7),eth_type(0x8847), mpls(label=12/0xfffff,tc=0/0,ttl=0/0x0,bos=1/1), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), pop_mpls(eth_type=0x800),4

---
 include/linux/skbuff.h    |    3 ++-
 net/core/skbuff.c         |    6 ++++--
 net/openvswitch/actions.c |    3 ++-
 net/sched/act_mpls.c      |    4 +++-
 4 files changed, 11 insertions(+), 5 deletions(-)

@@ -3483,7 +3483,8 @@ int skb_vlan_pop(struct sk_buff *skb);
 int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci);
 int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto,
 		  int mac_len);
-int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len);
+int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len,
+		 bool ethernet);
 int skb_mpls_update_lse(struct sk_buff *skb, __be32 mpls_lse);
 int skb_mpls_dec_ttl(struct sk_buff *skb);
 struct sk_buff *pskb_extract(struct sk_buff *skb, int off, int to_copy,

@@ -5517,12 +5517,14 @@ EXPORT_SYMBOL_GPL(skb_mpls_push);
  * @skb: buffer
  * @next_proto: ethertype of header after popped MPLS header
  * @mac_len: length of the MAC header
+ * @ethernet: flag to indicate if ethernet header is present in packet
  *
  * Expects skb->data at mac header.
  *
  * Returns 0 on success, -errno otherwise.
  */
-int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len)
+int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len,
+		 bool ethernet)
 {
 	int err;
 

@@ -5541,7 +5543,7 @@ int skb_mpls_pop(struct sk_buff *skb, __
 	skb_reset_mac_header(skb);
 	skb_set_network_header(skb, mac_len);
 
-	if (skb->dev && skb->dev->type == ARPHRD_ETHER) {
+	if (ethernet) {
 		struct ethhdr *hdr;
 
 		/* use mpls_hdr() to get ethertype to account for VLANs. */

@@ -179,7 +179,8 @@ static int pop_mpls(struct sk_buff *skb,
 {
 	int err;
 
-	err = skb_mpls_pop(skb, ethertype, skb->mac_len);
+	err = skb_mpls_pop(skb, ethertype, skb->mac_len,
+			   ovs_key_mac_proto(key) == MAC_PROTO_ETHERNET);
 	if (err)
 		return err;
 

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /* Copyright (C) 2019 Netronome Systems, Inc. */
 
+#include <linux/if_arp.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>

@@ -76,7 +77,8 @@ static int tcf_mpls_act(struct sk_buff *
 
 	switch (p->tcfm_action) {
 	case TCA_MPLS_ACT_POP:
-		if (skb_mpls_pop(skb, p->tcfm_proto, mac_len))
+		if (skb_mpls_pop(skb, p->tcfm_proto, mac_len,
+				 skb->dev && skb->dev->type == ARPHRD_ETHER))
 			goto drop;
 		break;
 	case TCA_MPLS_ACT_PUSH:

From: Taehee Yoo <[email protected]>

[ Upstream commit df95467b6d2bfce49667ee4b71c67249b01957f7 ]

hsr_dev_xmit() calls hsr_port_get_hsr() to find master node and that would return NULL if master node is not existing in the list.
But hsr_dev_xmit() doesn't check return pointer so a NULL dereference could occur.

Test commands:
ip netns add nst
ip link add veth0 type veth peer name veth1
ip link add veth2 type veth peer name veth3
ip link set veth1 netns nst
ip link set veth3 netns nst
ip link set veth0 up
ip link set veth2 up
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip netns exec nst ip link set veth1 up
ip netns exec nst ip link set veth3 up
ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1
ip netns exec nst ip link set hsr1 up
hping3 192.168.100.2 -2 --flood &
modprobe -rv hsr

Splat looks like:

[  217.351122][ T1635] kasan: CONFIG_KASAN_INLINE enabled
[  217.352969][ T1635] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  217.354297][ T1635] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  217.355507][ T1635] CPU: 1 PID: 1635 Comm: hping3 Not tainted 5.4.0+ #192
[  217.356472][ T1635] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  217.357804][ T1635] RIP: 0010:hsr_dev_xmit+0x34/0x90 [hsr]
[  217.373010][ T1635] Code: 48 8d be 00 0c 00 00 be 04 00 00 00 48 83 ec 08 e8 21 be ff ff 48 8d 78 10 48 ba 00 b
[  217.376919][ T1635] RSP: 0018:ffff8880cd8af058 EFLAGS: 00010202
[  217.377571][ T1635] RAX: 0000000000000000 RBX: ffff8880acde6840 RCX: 0000000000000002
[  217.379465][ T1635] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: 0000000000000010
[  217.380274][ T1635] RBP: ffff8880acde6840 R08: ffffed101b440d5d R09: 0000000000000001
[  217.381078][ T1635] R10: 0000000000000001 R11: ffffed101b440d5c R12: ffff8880bffcc000
[  217.382023][ T1635] R13: ffff8880bffcc088 R14: 0000000000000000 R15: ffff8880ca675c00
[  217.383094][ T1635] FS:  00007f060d9d1740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000
[  217.384289][ T1635] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  217.385009][ T1635] CR2: 00007faf15381dd0 CR3: 00000000d523c001 CR4: 00000000000606e0
[  217.385940][ T1635] Call Trace:
[  217.386544][ T1635]  dev_hard_start_xmit+0x160/0x740
[  217.387114][ T1635]  __dev_queue_xmit+0x1961/0x2e10
[  217.388118][ T1635]  ? check_object+0xaf/0x260
[  217.391466][ T1635]  ? __alloc_skb+0xb9/0x500
[  217.392017][ T1635]  ? init_object+0x6b/0x80
[  217.392629][ T1635]  ? netdev_core_pick_tx+0x2e0/0x2e0
[  217.393175][ T1635]  ? __alloc_skb+0xb9/0x500
[  217.393727][ T1635]  ? rcu_read_lock_sched_held+0x90/0xc0
[  217.394331][ T1635]  ? rcu_read_lock_bh_held+0xa0/0xa0
[  217.395013][ T1635]  ? kasan_unpoison_shadow+0x30/0x40
[  217.395668][ T1635]  ? __kasan_kmalloc.constprop.4+0xa0/0xd0
[  217.396280][ T1635]  ? __kmalloc_node_track_caller+0x3a8/0x3f0
[  217.399007][ T1635]  ? __kasan_kmalloc.constprop.4+0xa0/0xd0
[  217.400093][ T1635]  ? __kmalloc_reserve.isra.46+0x2e/0xb0
[  217.401118][ T1635]  ? memset+0x1f/0x40
[  217.402529][ T1635]  ? __alloc_skb+0x317/0x500
[  217.404915][ T1635]  ? arp_xmit+0xca/0x2c0

[ ... ]

---
 net/hsr/hsr_device.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

@@ -227,8 +227,13 @@ static int hsr_dev_xmit(struct sk_buff *
 	struct hsr_port *master;
 
 	master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
-	skb->dev = master->dev;
-	hsr_forward_skb(skb, master);
+	if (master) {
+		skb->dev = master->dev;
+		hsr_forward_skb(skb, master);
+	} else {
+		atomic_long_inc(&dev->tx_dropped);
+		dev_kfree_skb_any(skb);
+	}
 	return NETDEV_TX_OK;
 }
 

From: Martin Varghese <[email protected]>

[ Upstream commit d04ac224b1688f005a84f764cfe29844f8e9da08 ]

The skb_mpls_push was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device.

In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_push function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet.

recirc_id(0),in_port(7),eth_type(0x0800),ipv4(tos=0/0xfc,ttl=64,frag=no), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), push_mpls(label=13,tc=0,ttl=64,bos=1,eth_type=0x8847),4

---
 include/linux/skbuff.h    |    2 +-
 net/core/skbuff.c         |    4 ++--
 net/openvswitch/actions.c |    3 ++-
 net/sched/act_mpls.c      |    3 ++-
 4 files changed, 7 insertions(+), 5 deletions(-)

@@ -3482,7 +3482,7 @@ int __skb_vlan_pop(struct sk_buff *skb,
 int skb_vlan_pop(struct sk_buff *skb);
 int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci);
 int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto,
-		  int mac_len);
+		  int mac_len, bool ethernet);
 int skb_mpls_pop(struct sk_buff *skb, __be16 next_proto, int mac_len,
 		 bool ethernet);
 int skb_mpls_update_lse(struct sk_buff *skb, __be32 mpls_lse);

@@ -5472,7 +5472,7 @@ static void skb_mod_eth_type(struct sk_b
  * Returns 0 on success, -errno otherwise.
  */
 int skb_mpls_push(struct sk_buff *skb, __be32 mpls_lse, __be16 mpls_proto,
-		  int mac_len)
+		  int mac_len, bool ethernet)
 {
 	struct mpls_shim_hdr *lse;
 	int err;

@@ -5503,7 +5503,7 @@ int skb_mpls_push(struct sk_buff *skb, _
 	lse->label_stack_entry = mpls_lse;
 	skb_postpush_rcsum(skb, lse, MPLS_HLEN);
 
-	if (skb->dev && skb->dev->type == ARPHRD_ETHER)
+	if (ethernet)
 		skb_mod_eth_type(skb, eth_hdr(skb), mpls_proto);
 	skb->protocol = mpls_proto;
 

@@ -166,7 +166,8 @@ static int push_mpls(struct sk_buff *skb
 	int err;
 
 	err = skb_mpls_push(skb, mpls->mpls_lse, mpls->mpls_ethertype,
-			    skb->mac_len);
+			    skb->mac_len,
+			    ovs_key_mac_proto(key) == MAC_PROTO_ETHERNET);
 	if (err)
 		return err;
 

@@ -83,7 +83,8 @@ static int tcf_mpls_act(struct sk_buff *
 		break;
 	case TCA_MPLS_ACT_PUSH:
 		new_lse = tcf_mpls_get_lse(NULL, p, !eth_p_mpls(skb->protocol));
-		if (skb_mpls_push(skb, new_lse, p->tcfm_proto, mac_len))
+		if (skb_mpls_push(skb, new_lse, p->tcfm_proto, mac_len,
+				  skb->dev && skb->dev->type == ARPHRD_ETHER))
 			goto drop;
 		break;
 	case TCA_MPLS_ACT_MODIFY:

From: Eran Ben Elisha <[email protected]>

[ Upstream commit c55d8b108caa2ec1ae8dddd02cb9d3a740f7c838 ]

Cited patch changed (channel index, tc) => (TXQ index) mapping to be a static one, in order to keep indices consistent when changing number of channels or TCs.

For 32 channels (OOB) and 8 TCs, real num of TXQs is 256. When reducing the amount of channels to 8, the real num of TXQs will be changed to 64.
This indices method is buggy:
- Channel #0, TC 3, the TXQ index is 96.
- Index 8 is not valid, as there is no such TXQ from driver perspective (As it represents channel #8, TC 0, which is not valid with the above configuration).

As part of driver's select queue, it calls netdev_pick_tx which returns an index in the range of real number of TXQs. Depends on the return value, with the examples above, driver could have returned index larger than the real number of tx queues, or crash the kernel as it tries to read invalid address of SQ which was not allocated.

Fix that by allocating sequential TXQ indices, and hold a new mapping between (channel index, tc) => (real TXQ index). This mapping will be updated as part of priv channels activation, and is used in mlx5e_select_queue to find the selected queue index.

The existing indices mapping (channel_tc2txq) is no longer needed, as it is used only for statistics structures and can be calculated on run time. Delete its definintion and updates.

---
 drivers/net/ethernet/mellanox/mlx5/core/en.h       |    2 -
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |   31 ++++++++-------------
 drivers/net/ethernet/mellanox/mlx5/core/en_stats.c |    2 -
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c    |    2 -
 4 files changed, 15 insertions(+), 22 deletions(-)

@@ -792,7 +792,7 @@ struct mlx5e_xsk {
 struct mlx5e_priv {
 	/* priv data path fields - start */
 	struct mlx5e_txqsq *txq2sq[MLX5E_MAX_NUM_CHANNELS * MLX5E_MAX_NUM_TC];
-	int channel_tc2txq[MLX5E_MAX_NUM_CHANNELS][MLX5E_MAX_NUM_TC];
+	int channel_tc2realtxq[MLX5E_MAX_NUM_CHANNELS][MLX5E_MAX_NUM_TC];
 #ifdef CONFIG_MLX5_CORE_EN_DCB
 	struct mlx5e_dcbx_dp       dcbx_dp;
 #endif

@@ -1678,11 +1678,10 @@ static int mlx5e_open_sqs(struct mlx5e_c
 			  struct mlx5e_params *params,
 			  struct mlx5e_channel_param *cparam)
 {
-	struct mlx5e_priv *priv = c->priv;
 	int err, tc;
 
 	for (tc = 0; tc < params->num_tc; tc++) {
-		int txq_ix = c->ix + tc * priv->max_nch;
+		int txq_ix = c->ix + tc * params->num_channels;
 
 		err = mlx5e_open_txqsq(c, c->priv->tisn[tc], txq_ix,
 				       params, &cparam->sq, &c->sq[tc], tc);

@@ -2856,26 +2855,21 @@ static void mlx5e_netdev_set_tcs(struct
 		netdev_set_tc_queue(netdev, tc, nch, 0);
 }
 
-static void mlx5e_build_tc2txq_maps(struct mlx5e_priv *priv)
+static void mlx5e_build_txq_maps(struct mlx5e_priv *priv)
 {
-	int i, tc;
+	int i, ch;
 
-	for (i = 0; i < priv->max_nch; i++)
-		for (tc = 0; tc < priv->profile->max_tc; tc++)
-			priv->channel_tc2txq[i][tc] = i + tc * priv->max_nch;
-}
+	ch = priv->channels.num;
 
-static void mlx5e_build_tx2sq_maps(struct mlx5e_priv *priv)
-{
-	struct mlx5e_channel *c;
-	struct mlx5e_txqsq *sq;
-	int i, tc;
+	for (i = 0; i < ch; i++) {
+		int tc;
+
+		for (tc = 0; tc < priv->channels.params.num_tc; tc++) {
+			struct mlx5e_channel *c = priv->channels.c[i];
+			struct mlx5e_txqsq *sq = &c->sq[tc];
 
-	for (i = 0; i < priv->channels.num; i++) {
-		c = priv->channels.c[i];
-		for (tc = 0; tc < c->num_tc; tc++) {
-			sq = &c->sq[tc];
 			priv->txq2sq[sq->txq_ix] = sq;
+			priv->channel_tc2realtxq[i][tc] = i + tc * ch;
 		}
 	}
 }

@@ -2890,7 +2884,7 @@ void mlx5e_activate_priv_channels(struct
 	netif_set_real_num_tx_queues(netdev, num_txqs);
 	netif_set_real_num_rx_queues(netdev, num_rxqs);
 
-	mlx5e_build_tx2sq_maps(priv);
+	mlx5e_build_txq_maps(priv);
 	mlx5e_activate_channels(&priv->channels);
 	mlx5e_xdp_tx_enable(priv);
 	netif_tx_start_all_queues(priv->netdev);

@@ -4968,7 +4962,6 @@ static int mlx5e_nic_init(struct mlx5_co
 	if (err)
 		mlx5_core_err(mdev, "TLS initialization failed, %d\n", err);
 	mlx5e_build_nic_netdev(netdev);
-	mlx5e_build_tc2txq_maps(priv);
 
 	return 0;
 }

@@ -1435,7 +1435,7 @@ static int mlx5e_grp_channels_fill_strin
 			for (j = 0; j < NUM_SQ_STATS; j++)
 				sprintf(data + (idx++) * ETH_GSTRING_LEN,
 					sq_stats_desc[j].format,
-					priv->channel_tc2txq[i][tc]);
+					i + tc * max_nch);
 
 	for (i = 0; i < max_nch; i++) {
 		for (j = 0; j < NUM_XSKSQ_STATS * is_xsk; j++)

@@ -93,7 +93,7 @@ u16 mlx5e_select_queue(struct net_device
 	if (txq_ix >= num_channels)
 		txq_ix = priv->txq2sq[txq_ix]->ch_ix;
 
-	return priv->channel_tc2txq[txq_ix][up];
+	return priv->channel_tc2realtxq[txq_ix][up];
 }
 
 static inline int mlx5e_skb_l2_header_offset(struct sk_buff *skb)

From: Jonathan Lemon <[email protected]>

[ Upstream commit c3f812cea0d7006469d1cf33a4a9f0a12bb4b3a3 ]

The page pool keeps track of the number of pages in flight, and it isn't safe to remove the pool until all pages are returned.

Disallow removing the pool until all pages are back, so the pool is always available for page producers.

Make the page pool responsible for its own delayed destruction instead of relying on XDP, so the page pool can be used without the xdp memory model.

When all pages are returned, free the pool and notify xdp if the pool is registered with the xdp memory system. Have the callback perform a table walk since some drivers (cpsw) may share the pool among multiple xdp_rxq_info.

Note that the increment of pages_state_release_cnt may result in inflight == 0, resulting in the pool being released.

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |    4 
 include/net/page_pool.h                           |   52 ++-------
 include/net/xdp_priv.h                            |    4 
 include/trace/events/xdp.h                        |   19 ---
 net/core/page_pool.c                              |  122 +++++++++++++---------
 net/core/xdp.c                                    |  121 +++++++--------------
 6 files changed, 139 insertions(+), 183 deletions(-)

@@ -1477,10 +1477,8 @@ static void free_dma_rx_desc_resources(s
 					  rx_q->dma_erx, rx_q->dma_rx_phy);
 
 		kfree(rx_q->buf_pool);
-		if (rx_q->page_pool) {
-			page_pool_request_shutdown(rx_q->page_pool);
+		if (rx_q->page_pool)
 			page_pool_destroy(rx_q->page_pool);
-		}
 	}
 }
 

@@ -12,12 +12,8 @@ struct xdp_mem_allocator {
 		struct page_pool *page_pool;
 		struct zero_copy_allocator *zc_alloc;
 	};
-	int disconnect_cnt;
-	unsigned long defer_start;
 	struct rhash_head node;
 	struct rcu_head rcu;
-	struct delayed_work defer_wq;
-	unsigned long defer_warn;
 };
 
 #endif /* __LINUX_NET_XDP_PRIV_H__ */

@@ -316,19 +316,15 @@ __MEM_TYPE_MAP(__MEM_TYPE_TP_FN)
 
 TRACE_EVENT(mem_disconnect,
 
-	TP_PROTO(const struct xdp_mem_allocator *xa,
-		 bool safe_to_remove, bool force),
+	TP_PROTO(const struct xdp_mem_allocator *xa),
 
-	TP_ARGS(xa, safe_to_remove, force),
+	TP_ARGS(xa),
 
 	TP_STRUCT__entry(
 		__field(const struct xdp_mem_allocator *,	xa)
 		__field(u32,		mem_id)
 		__field(u32,		mem_type)
 		__field(const void *,	allocator)
-		__field(bool,		safe_to_remove)
-		__field(bool,		force)
-		__field(int,		disconnect_cnt)
 	),
 
 	TP_fast_assign(

@@ -336,19 +332,12 @@ TRACE_EVENT(mem_disconnect,
 		__entry->mem_id		= xa->mem.id;
 		__entry->mem_type	= xa->mem.type;
 		__entry->allocator	= xa->allocator;
-		__entry->safe_to_remove	= safe_to_remove;
-		__entry->force		= force;
-		__entry->disconnect_cnt	= xa->disconnect_cnt;
 	),
 
-	TP_printk("mem_id=%d mem_type=%s allocator=%p"
-		  " safe_to_remove=%s force=%s disconnect_cnt=%d",
+	TP_printk("mem_id=%d mem_type=%s allocator=%p",
 		  __entry->mem_id,
 		  __print_symbolic(__entry->mem_type, __MEM_TYPE_SYM_TAB),
-		  __entry->allocator,
-		  __entry->safe_to_remove ? "true" : "false",
-		  __entry->force ? "true" : "false",
-		  __entry->disconnect_cnt
+		  __entry->allocator
 	)
 );
 

From: Jonathan Lemon <[email protected]>

[ Upstream commit 86c76c09898332143be365c702cf8d586ed4ed21 ]

A lockdep splat was observed when trying to remove an xdp memory model from the table since the mutex was obtained when trying to remove the entry, but not before the table walk started:

Fix the splat by obtaining the lock before starting the table walk.

---
 net/core/xdp.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

@@ -85,12 +85,8 @@ static void mem_xa_remove(struct xdp_mem
 {
 	trace_mem_disconnect(xa);
 
-	mutex_lock(&mem_id_lock);
-
 	if (!rhashtable_remove_fast(mem_id_ht, &xa->node, mem_id_rht_params))
 		call_rcu(&xa->rcu, __xdp_mem_allocator_rcu_free);
-
-	mutex_unlock(&mem_id_lock);
 }
 
 static void mem_allocator_disconnect(void *allocator)

@@ -98,6 +94,8 @@ static void mem_allocator_disconnect(voi
 	struct xdp_mem_allocator *xa;
 	struct rhashtable_iter iter;
 
+	mutex_lock(&mem_id_lock);
+
 	rhashtable_walk_enter(mem_id_ht, &iter);
 	do {
 		rhashtable_walk_start(&iter);

@@ -111,6 +109,8 @@ static void mem_allocator_disconnect(voi
 
 	} while (xa == ERR_PTR(-EAGAIN));
 	rhashtable_walk_exit(&iter);
+
+	mutex_unlock(&mem_id_lock);
 }
 
 static void mem_id_disconnect(int id)

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.3.18-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.3.y
git commit: 0763039c48446b647d8619afe0624d6e5c62e4c0
git describe: v5.3.16-216-g0763039c4844
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.3-oe/build/v5.3.16-216-g0763039c4844

No regressions (compared to build v5.3.16)

No fixes (compared to build v5.3.16)

Ran 21111 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite

Linaro LKFT
https://lkft.linaro.org

All tests are passing for Tegra ...

Test results for stable-v5.3:

    13 builds:	13 pass, 0 fail
    22 boots:	22 pass, 0 fail
    38 tests:	38 pass, 0 fail

Linux version: 5.3.18-rc1-g0763039c4844
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

nvpublic

Build results:

	total: 158 pass: 158 fail: 0
Qemu test results:
	total: 384 pass: 384 fail: 0

Guenter

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah