clk: sunxi-ng: r40: Allow setting parent rate for external clock outputs
Subsystems (2)
Chen-Yu Tsai
maintainerPATCH 1/1 clk: sunxi-ng: r40: Allow setting parent rate for external clock outputs
From: Chen-Yu Tsai <[email protected]>
One of the uses of the external clock outputs is to provide a stable 32768 Hz clock signal to WiFi and Bluetooth chips. On the R40, the RTC has an internal RC oscillator that is muxed with the external crystal.
Allow setting the parent rate for the external clock outputs so that requests for 32768 Hz get passed to the RTC's clock driver to mux in the external crystal if it isn't already muxed correctly.
--- drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/clk/sunxi-ng/ccu-sun8i-r40.c +4 -2
@@ -761,7 +761,8 @@ static struct ccu_mp outa_clk = { .reg = 0x1f0, .features = CCU_FEATURE_FIXED_PREDIV, .hw.init = CLK_HW_INIT_PARENTS("outa", out_parents, - &ccu_mp_ops, 0), + &ccu_mp_ops, + CLK_SET_RATE_PARENT), } };
@@ -779,7 +780,8 @@ static struct ccu_mp outb_clk = { .reg = 0x1f4, .features = CCU_FEATURE_FIXED_PREDIV, .hw.init = CLK_HW_INIT_PARENTS("outb", out_parents, - &ccu_mp_ops, 0), + &ccu_mp_ops, + CLK_SET_RATE_PARENT), } };
Signature · 1 line
2.24.0
Maxime Ripard
AppliedQuoted 6 lines · Chen-Yu Tsai
From: Chen-Yu Tsai <[email protected]>
One of the uses of the external clock outputs is to provide a stable 32768 Hz clock signal to WiFi and Bluetooth chips. On the R40, the RTC has an internal RC oscillator that is muxed with the external crystal.
Quoted 8 lines
Allow setting the parent rate for the external clock outputs so that requests for 32768 Hz get passed to the RTC's clock driver to mux in the external crystal if it isn't already muxed correctly.
Fixes cd030a78f7aa ("clk: sunxi-ng: support R40 SoC")Fixes 01a7ea763fc4 ("clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output")Cc <[email protected]>Signed-off-by Chen-Yu Tsai <[email protected]>
Applied, thanks!
Maxime