QEMU AVR 8 bit cores
v39 cover QEMU AVR 8 bit cores
This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet. However I was able to execute simple code with functions. e.g fibonacci calculation. This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.
Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
run qemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window run qemu-system-avr -kernel program.elf -serial tcp::5678,server,nowait -nographic run telent localhost 5678
3. Continious non interrupted execution with serial output into stdout
run qemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
run qemu-system-avr -kernel program.elf -s -S
run avr-gdb program.elf and then within GDB shell target remote :1234
5. Print out executed instructions
run qemu-system-avr -kernel program.elf -d in_asm
the patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores
avr1
avr2 avr25
avr3 avr31 avr35
avr4
avr5 avr51
avr6
xmega2 xmega4 xmega5 xmega6 xmega73. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features together
changes since v3
1. rampD/X/Y/Z registers are encoded as 0x00ff0000 (instead of 0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed at avr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7. tcg_const_local_i32 -> tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of 0xff - r at COM
11.fixing MULS/MULSU not to modify inputs' content
12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCH
changes since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifying gen_goto_tb as there is no real paging
5. env->pc -> env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removing avr_set_feature
10. SPL/SPH set bug fix
11. switching stb_phys to cpu_stb_data
12. cleaning up avr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)
changes since v5
1. BLD bug fix
2. decoder generator is added
chages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_ret
changes since v7
1. folding back v6
2. logging at helper_outb and helper_inb are done for non supported yet registers only
3. MAINTAINERS updated
changes since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing on
a. Mac, Apple LLVM version 7.0.0
b. Ubuntu 12.04, gcc 4.9.2
c. Fedora 23, gcc 5.3.14. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memory
changes since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7. memory_region_allocate_system_memory is used to create RAM
8. now there are helper_fullrd & helper_fullwr when LD/ST try to access registers
changes since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changing tlb_fill function signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. using tb->flags to generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objs
changes since v11
1. updating to v2.7.0-rc
2. removing assignment to env->fullacc from gen_intermediate_code
changes since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removing target-avr/machine.h file
4. VMSTATE_SINGLE_TEST -> VMSTATE_SINGLE
5. comment spelling
6. removing hw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixing avr_cpu_gdb_write_register & avr_cpu_gdb_read_register functions 12.any cpu is removed
12.feature bits are not saved into vm state
changes since v13
1. rebasing to v2.7.0-rc1
changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chris
changes since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI as read(helper_inb), modify, write(helper_outb)
3. implementing CBIC/SBIC as read(helper_inb), check, branch
4. adding missing tcg_temp_free_i32 for tcg_const_i32
changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible by LD/ST only. CPU has no interest in them
changes since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:
1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation of translate.c.
I retained the two separate files that could be regenerated from the included cpugen program, but merged in translate-insn.c. Not that it matters, but the code generated is about 3k smaller.
changes since v18
1. moving target-avr into target/avr 2. do not call cpu_exec_initfn function from avr_cpu_initfn 3. call cpu_exec_realizefn avr_cpu_realizefn 4. do not fail sample machine creation if no rom is suplied 5. add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code 6. fix a register getters/setters in machine.c 7. changing QEMU_ARCH_AVR from 1<<17 to 1<<18
changes since v19
1. use decodetree.py tool to decode instructions 2. adding USART 3. adding 16 bit timer peripherals 4. changing QEMU_ARCH_AVR from 1<<18 to 1<<20 5. renaming tlb_fill to avr_cpu_tlb_fill
changes since v20
1. use one CPU naming convention 2. merging insn16.decode & insn32.decode files 3. modifying skip next instruction mechanizm 4. translate BREAK as NOP for now
changes since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a couple of bugs wrt single stepping by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Add gdb-xml/avr-cpu.xml
changes since v22
1. Rebase
2. Split long comment
changes since v23
1. remove avr_cpu_list_compare function 2. modify avr_cpu_class_by_name function 3. modify avr_cpu_list_entry function 4. modify avr_cpu_list function
changes since v24
1. remove AVR_CPU_TYPE_NAME macro
changes since v25
1. fix patches. every file belong to one patch only 2. change copyright year from 2016 to 2019 3. create mask device to emulate prr0/prr1
changes since v26
1. add avocado acceptence test
2. add boot serial test
changes since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/size
changes since v28
1. rebase
2. fix includes & build
changes since v29
1. fixing ownership
2. using 'since' instread of 'added in'
changes since v30
1. rebase
changes since v31
1. splitting 'Add instruction translation' commit 2. fixing typo in qapi/machine.json sicne -> since 3. removing unintended changes in configure file 4. adding Richard Henderson as a co developer to 'Add instruction translation - CPU main translation funcions' commit
changes since v32
1. modify cpu_get_sreg to treat sreg C as other flags, except sreg Z
changes since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logic
changes since v34
1. rebase
changes since v35
1. rebase
2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c
3. split "target/avr: Register AVR support with the rest of QEMU" into three patches
1. "target/avr: Register AVR support with the rest of QEMU"
2. "target/avr: Update build system"
3. "target/avr: Update MAINTAINERS file"4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"
changes since v36
1. rebase
2. rename
1. NO_CPU_REGISTERS -> NUMBER_OF_CPU_REGISTERS
2. NO_IO_REGISTERS -> NUMBER_OF_IO_REGISTERS
3. to_A -> to_regs_16_31_by_one
4. to_B -> to_regs_16_23_by_one
5. to_C -> to_regs_24_30_by_two
6. to_D -> to_regs_00_30_by_two
3. add missing licences
4. add usage example (see above)
5. ass Sarah Harris <[email protected]> as a reviewer to MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado testchanges since v37
1. rebase
2. moving all data transfer instructions into a separate commit
3. splitting tests into
1. avocado test
2. boot serial test
3. machine none test
4. split periperals commit into
1. timer
2. usart
3. mask
5. add function `avr_flags_to_cpu_type` that translates ELF flags into core name
6. add avrtiny, xmega3 cores
7. remove unnecessary includes from target/avr/helper.c file
8. remove empty lines from target/avr/translate.c file
9. set number of interrupt lines to 6410. determine cpu type by reading ELF flags
11. update license of all new files to be LGPL
12. udpate QEMU documentation
changes since v38
1. rebase 2. add examples of AVR emulator invokation into the QEMU doc 3. reorder instructions to match AVR documentation 4. fix elf loader function bug introduced by prev version
Michael Rolnik (22):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Data Transfer Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add limited support for USART peripheral target/avr: Add limited support for 16 bit timer peripheral target/avr: Add dummy mask device
target/avr: Add example board configuration
target/avr: Add section about AVR into QEMU documentation target/avr: Register AVR support with the rest of QEMU target/avr: Add machine none test
target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: Update MAINTAINERS file
qemu-doc.texi | 51 + configure | 7 + default-configs/avr-softmmu.mak | 5 + qapi/machine.json | 3 +- include/disas/dis-asm.h | 19 + include/elf.h | 2 + include/hw/char/avr_usart.h | 93 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- include/hw/misc/avr_mask.h | 47 + include/hw/timer/avr_timer16.h | 93 + include/sysemu/arch_init.h | 1 + target/avr/cpu-param.h | 37 + target/avr/cpu-qom.h | 54 + target/avr/cpu.h | 259 +++ target/avr/helper.h | 29 + arch_init.c | 2 + hw/avr/sample.c | 293 +++ hw/char/avr_usart.c | 320 ++++ hw/core/loader.c | 15 +- hw/misc/avr_mask.c | 112 ++ hw/riscv/boot.c | 2 +- hw/timer/avr_timer16.c | 601 ++++++ target/avr/cpu.c | 654 +++++++ target/avr/disas.c | 245 +++ target/avr/gdbstub.c | 84 + target/avr/helper.c | 347 ++++ target/avr/machine.c | 121 ++ target/avr/translate.c | 2921 ++++++++++++++++++++++++++++++ tests/boot-serial-test.c | 10 + tests/machine-none-test.c | 1 + MAINTAINERS | 21 + gdb-xml/avr-cpu.xml | 49 + hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + hw/char/Kconfig | 3 + hw/char/Makefile.objs | 1 + hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + hw/timer/Kconfig | 3 + hw/timer/Makefile.objs | 2 + target/avr/Makefile.objs | 34 + target/avr/insn.decode | 183 ++ tests/Makefile.include | 2 + tests/acceptance/machine_avr6.py | 58 + 46 files changed, 6797 insertions(+), 12 deletions(-) create mode 100644 default-configs/avr-softmmu.mak create mode 100644 include/hw/char/avr_usart.h create mode 100644 include/hw/misc/avr_mask.h create mode 100644 include/hw/timer/avr_timer16.h create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/helper.h create mode 100644 hw/avr/sample.c create mode 100644 hw/char/avr_usart.c create mode 100644 hw/misc/avr_mask.c create mode 100644 hw/timer/avr_timer16.c create mode 100644 target/avr/cpu.c create mode 100644 target/avr/disas.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/helper.c create mode 100644 target/avr/machine.c create mode 100644 target/avr/translate.c create mode 100644 gdb-xml/avr-cpu.xml create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objs create mode 100644 target/avr/Makefile.objs create mode 100644 target/avr/insn.decode create mode 100644 tests/acceptance/machine_avr6.py
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 1/22 target/avr: Add outward facing interfaces and core CPU logic
This includes:
- CPU data structures
- object model classes and functions
- migration functions
- GDB hooks
--- target/avr/cpu-param.h | 37 +++ target/avr/cpu-qom.h | 54 ++++ target/avr/cpu.h | 258 ++++++++++++++++ target/avr/cpu.c | 654 +++++++++++++++++++++++++++++++++++++++++ target/avr/gdbstub.c | 84 ++++++ target/avr/machine.c | 121 ++++++++ gdb-xml/avr-cpu.xml | 49 +++ 7 files changed, 1257 insertions(+) create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/cpu.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/machine.c create mode 100644 gdb-xml/avr-cpu.xml
target/avr/cpu-param.h new file +37 -0
@@ -0,0 +1,37 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#ifndef AVR_CPU_PARAM_H +#define AVR_CPU_PARAM_H + +#define TARGET_LONG_BITS 32 +/* +* TARGET_PAGE_BITS cannot be more than 8 bits because +* 1. all IO registers occupy [0x0000 .. 0x00ff] address range, and they +* should be implemented as a device and not memory +* 2. SRAM starts at the address 0x0100 +*/ +#define TARGET_PAGE_BITS 8 +#define TARGET_PHYS_ADDR_SPACE_BITS 24 +#define TARGET_VIRT_ADDR_SPACE_BITS 24 +#define NB_MMU_MODES 2 + + +#endif
target/avr/cpu-qom.h new file +54 -0
54 lines not on this page · raw message
target/avr/cpu.h new file +258 -0
258 lines not on this page · raw message
target/avr/cpu.c new file +654 -0
654 lines not on this page · raw message
target/avr/gdbstub.c new file +84 -0
84 lines not on this page · raw message
target/avr/machine.c new file +121 -0
121 lines not on this page · raw message
gdb-xml/avr-cpu.xml new file +49 -0
49 lines not on this page · raw message
Signature · 1 line
2.17.2 (Apple Git-113)
Re: [PATCH v39 01/22] target/avr: Add outward facing interfaces and core CPU logic
Quoted 236 lines · Michael Rolnik
This includes:
- CPU data structures
- object model classes and functions
- migration functions
- GDB hooksCo-developed-by Michael Rolnik <[email protected]>Co-developed-by Sarah Harris <[email protected]>Signed-off-by Michael Rolnik <[email protected]>Signed-off-by Sarah Harris <[email protected]>Signed-off-by Michael Rolnik <[email protected]>Acked-by Igor Mammedov <[email protected]>--- target/avr/cpu-param.h | 37 +++ target/avr/cpu-qom.h | 54 ++++ target/avr/cpu.h | 258 ++++++++++++++++ target/avr/cpu.c | 654 +++++++++++++++++++++++++++++++++++++++++ target/avr/gdbstub.c | 84 ++++++ target/avr/machine.c | 121 ++++++++ gdb-xml/avr-cpu.xml | 49 +++ 7 files changed, 1257 insertions(+) create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/cpu.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/machine.c create mode 100644 gdb-xml/avr-cpu.xmltarget/avr/cpu-param.h new file +37
-0@@ -0,0 +1,37 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#ifndef AVR_CPU_PARAM_H +#define AVR_CPU_PARAM_H + +#define TARGET_LONG_BITS 32 +/* +* TARGET_PAGE_BITS cannot be more than 8 bits because +* 1. all IO registers occupy [0x0000 .. 0x00ff] address range, and they +* should be implemented as a device and not memory +* 2. SRAM starts at the address 0x0100 +*/ +#define TARGET_PAGE_BITS 8 +#define TARGET_PHYS_ADDR_SPACE_BITS 24 +#define TARGET_VIRT_ADDR_SPACE_BITS 24 +#define NB_MMU_MODES 2 + + +#endif target/avr/cpu-qom.h new file +54
-0@@ -0,0 +1,54 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#ifndef QEMU_AVR_QOM_H +#define QEMU_AVR_QOM_H + +#include "hw/core/cpu.h" + +#define TYPE_AVR_CPU "avr-cpu" + +#define AVR_CPU_CLASS (klass) \ + OBJECT_CLASS_CHECK(AVRCPUClass, (klass), TYPE_AVR_CPU) +#define AVR_CPU (obj) \ + OBJECT_CHECK(AVRCPU, (obj), TYPE_AVR_CPU) +#define AVR_CPU_GET_CLASS (obj) \ + OBJECT_GET_CLASS(AVRCPUClass, (obj), TYPE_AVR_CPU) + +/** +* AVRCPUClass: +* @parent_realize: The parent class' realize handler. +* @parent_reset: The parent class' reset handler. +* @vr: Version Register value. +* +* A AVR CPU model. +*/ +typedef struct AVRCPUClass { +/*< private >*/ +CPUClass parent_class; +/*< public >*/ +DeviceRealize parent_realize; +void (*parent_reset)(CPUState *cpu); +}AVRCPUClass ; + +typedef struct AVRCPU AVRCPU ; + + +#endif /* !defined (QEMU_AVR_CPU_QOM_H) */ target/avr/cpu.h new file +97
-0@@ -0,0 +1,258 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#ifndef QEMU_AVR_CPU_H +#define QEMU_AVR_CPU_H + +#include "cpu-qom.h" +#include "exec/cpu-defs.h" + +#define TCG_GUEST_DEFAULT_MO 0 +#define AVR_CPU_TYPE_SUFFIX "-" TYPE_AVR_CPU +#define AVR_CPU_TYPE_NAME(name) (name AVR_CPU_TYPE_SUFFIX) +#define CPU_RESOLVING_TYPE TYPE_AVR_CPU + +/* + * AVR has two memory spaces, data & code. + * e.g. both have 0 address + * ST/LD instructions access data space + * LPM/SPM and instruction fetching access code memory space + */ +#define MMU_CODE_IDX 0 +#define MMU_DATA_IDX 1 + +#define EXCP_RESET 1 +#define EXCP_INT(n) (EXCP_RESET + (n) + 1) + +/* Number of CPU registers */ +#define NUMBER_OF_CPU_REGISTERS 32 +/* Number of IO registers accessible by ld/st/in/out */ +#define NUMBER_OF_IO_REGISTERS 64 + +/* + * Offsets of AVR memory regions in host memory space. + * + * This is needed because the AVR has separate code and data address + * spaces that both have start from zero but have to go somewhere in + * host memory. + * + * It's also useful to know where some things are, like the IO registers. + */ +/* Flash program memory */ +#define OFFSET_CODE 0x00000000 +/* CPU registers, IO registers, and SRAM */ +#define OFFSET_DATA 0x00800000 +/* CPU registers specifically, these are mapped at the start of data */ +#define OFFSET_CPU_REGISTERS OFFSET_DATA +/* + * IO registers, including status register, stack pointer, and memory + * mapped peripherals, mapped just after CPU registers + */ +#define OFFSET_IO_REGISTERS (OFFSET_DATA + NUMBER_OF_CPU_REGISTERS) + +#define EF_AVR_MACH 0x7F + +typedef enum AVRFeature { + AVR_FEATURE_SRAM, + + AVR_FEATURE_1_BYTE_PC, + AVR_FEATURE_2_BYTE_PC, + AVR_FEATURE_3_BYTE_PC, + + AVR_FEATURE_1_BYTE_SP, + AVR_FEATURE_2_BYTE_SP, + + AVR_FEATURE_BREAK, + AVR_FEATURE_DES, + AVR_FEATURE_RMW, /* Read Modify Write - XCH LAC LAS LAT */ + + AVR_FEATURE_EIJMP_EICALL, + AVR_FEATURE_IJMP_ICALL, + AVR_FEATURE_JMP_CALL, + + AVR_FEATURE_ADIW_SBIW, + + AVR_FEATURE_SPM, + AVR_FEATURE_SPMX, + + AVR_FEATURE_ELPMX, + AVR_FEATURE_ELPM, + AVR_FEATURE_LPMX,
target/avr/cpu.h line 107
Quoted 10 lines
target/avr/cpu.h new file +10
-0+AVR_FEATURE_LPM , + +AVR_FEATURE_MOVW , +AVR_FEATURE_MUL , +AVR_FEATURE_RAMPD , +AVR_FEATURE_RAMPX , +AVR_FEATURE_RAMPY , +AVR_FEATURE_RAMPZ , +} AVRFeature; +
Very good! Now, each feature should have some really brief (less than say 45 characters) comment in the same line as the definition, like this one:
AVR_FEATURE_MOVW, /* supports MOVW instruction */
You already did it for AVR_FEATURE_RMW
Of course, all such comments should be vertically aligned nicely.
Quoted 19 lines
target/avr/cpu.h new file +19
-0+typedef struct CPUAVRState CPUAVRState ; + +struct CPUAVRState { +uint32_t pc_w;/* 0x003fffff up to 22 bits */ + +uint32_t sregC;/* 0x00000001 1 bit */ +uint32_t sregZ;/* 0x00000001 1 bit */ +uint32_t sregN;/* 0x00000001 1 bit */ +uint32_t sregV;/* 0x00000001 1 bit */ +uint32_t sregS;/* 0x00000001 1 bit */ +uint32_t sregH;/* 0x00000001 1 bit */ +uint32_t sregT;/* 0x00000001 1 bit */ +uint32_t sregI;/* 0x00000001 1 bit */ + +uint32_t rampD;/* 0x00ff0000 8 bits */ +uint32_t rampX;/* 0x00ff0000 8 bits */ +uint32_t rampY;/* 0x00ff0000 8 bits */ +uint32_t rampZ;/* 0x00ff0000 8 bits */ +uint32_t eind;/* 0x00ff0000 8 bits */
target/avr/cpu.h line 136
Quoted 10 lines
target/avr/cpu.h new file +10
-0+ +uint32_t r[NUMBER_OF_CPU_REGISTERS ];/* 8 bits each */ +uint32_t sp;/* 16 bits */ + +uint32_t skip;/* if set skip instruction */ + +uint64_t intsrc;/* interrupt sources */ +bool fullacc;/* CPU/MEM if true MEM only otherwise */ + +uint32_t features;
Currently, there are around 25 features. We can realistically expect that there will be mire than 32 features in not so distant future. Please, in that light, use here "uint64_t" instead of "uint_32_t".
Quoted 22 lines
target/avr/cpu.h new file +22
-0+}; + +/** +* AVRCPU: +* @env: #CPUAVRState +* +* A AVR CPU. +*/ +typedef struct AVRCPU { +/*< private >*/ +CPUState parent_obj; +/*< public >*/ + +CPUNegativeOffsetState neg; +CPUAVRState env; +}AVRCPU ; + +#ifndef CONFIG_USER_ONLY +extern const struct VMStateDescription vms_avr_cpu; +#endif + +void avr_cpu_do_interrupt (CPUState *cpu);
target/avr/cpu.h line 168
Quoted 10 lines
target/avr/cpu.h new file +10
-0+bool avr_cpu_exec_interrupt (CPUState *cpu,int int_req); +hwaddr avr_cpu_get_phys_page_debug (CPUState *cpu,vaddr addr); +int avr_cpu_gdb_read_register (CPUState *cpu,uint8_t *buf,int reg); +int avr_cpu_gdb_write_register (CPUState *cpu,uint8_t *buf,int reg); + +static inline int avr_feature (CPUAVRState *env,AVRFeature feature) +{ +return (env->features & (1U << feature)) !=0 ; +} +
Excelent! But please rename the function to has_avr_feature() or get_avr_feature().
+static inline void avr_set_feature(CPUAVRState *env, int feature)
target/avr/cpu.h line 173
Quoted 4 lines
target/avr/cpu.h new file +4
-0+{ + env->features |= (1U << feature); +} +
Is there any particular reason for the second argument to be int? If not, please change it to be AVRFeature. Also, please rename the function to be set_avr_feature().
+#define cpu_list avr_cpu_list
Quoted 1,026 lines
target/avr/cpu.h new file +24
-0+#define cpu_signal_handler cpu_avr_signal_handler +#define cpu_mmu_index avr_cpu_mmu_index + +static inline int avr_cpu_mmu_index (CPUAVRState *env,bool ifetch) +{ +return ifetch ?MMU_CODE_IDX :MMU_DATA_IDX ; +} + +void avr_cpu_tcg_init (void ); + +void avr_cpu_list (void ); +int cpu_avr_exec (CPUState *cpu); +int cpu_avr_signal_handler (int host_signum,void *pinfo,void *puc); +int avr_cpu_handle_mmu_fault (CPUState *cpu,vaddr address,int size, +int rw,int mmu_idx); +int avr_cpu_memory_rw_debug (CPUState *cs,vaddr address,uint8_t *buf, +int len,bool is_write); + +enum { +TB_FLAGS_FULL_ACCESS =1 , +TB_FLAGS_SKIP =2 , +}; + +static inline void cpu_get_tb_cpu_state(CPUAVRState *env, target_ulong*pc,
target/avr/cpu.h new file +58
-0+ target_ulong *cs_base, uint32_t *pflags) +{ +uint32_t flags =0 ; + + *pc = env->pc_w *2 ; + *cs_base =0 ; + +if (env->fullacc) { + flags |=TB_FLAGS_FULL_ACCESS ; + } +if (env->skip) { + flags |=TB_FLAGS_SKIP ; + } + + *pflags = flags; +} + +static inline int cpu_interrupts_enabled (CPUAVRState *env) +{ +return env->sregI !=0 ; +} + +static inline uint8_t cpu_get_sreg (CPUAVRState *env) +{ +uint8_t sreg; + sreg = (env->sregC) <<0 + | (env->sregZ) <<1 + | (env->sregN) <<2 + | (env->sregV) <<3 + | (env->sregS) <<4 + | (env->sregH) <<5 + | (env->sregT) <<6 + | (env->sregI) <<7 ; +return sreg; +} + +static inline void cpu_set_sreg (CPUAVRState *env,uint8_t sreg) +{ + env->sregC = (sreg >>0 ) &0x01 ; + env->sregZ = (sreg >>1 ) &0x01 ; + env->sregN = (sreg >>2 ) &0x01 ; + env->sregV = (sreg >>3 ) &0x01 ; + env->sregS = (sreg >>4 ) &0x01 ; + env->sregH = (sreg >>5 ) &0x01 ; + env->sregT = (sreg >>6 ) &0x01 ; + env->sregI = (sreg >>7 ) &0x01 ; +} + +bool avr_cpu_tlb_fill (CPUState *cs,vaddr address,int size, +MMUAccessType access_type,int mmu_idx, +bool probe,uintptr_t retaddr); + +typedef CPUAVRState CPUArchState ; +typedef AVRCPU ArchCPU ; + +#include "exec/cpu-all.h" + +const char *avr_flags_to_cpu_type(uint32_t flags, const char
*def_cpu_type);target/avr/cpu.h new file +2
-0+ +#endif /* !defined (QEMU_AVR_CPU_H) */ target/avr/cpu.c new file +40
-0@@ -0,0 +1,654 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/qemu-print.h" +#include "exec/exec-all.h" +#include "cpu.h" +#include "disas/dis-asm.h" + +static void avr_cpu_set_pc (CPUState *cs,vaddr value) +{ +AVRCPU *cpu =AVR_CPU (cs); + + cpu->env.pc_w = value /2 ;/* internally PC points to words */ +} + +static bool avr_cpu_has_work (CPUState *cs) +{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; + + return (cs->interrupt_request & (CPU_INTERRUPT_HARD |
CPU_INTERRUPT_RESET))target/avr/cpu.c new file +4
-0+ &&cpu_interrupts_enabled (env); +} + +static void avr_cpu_synchronize_from_tb(CPUState *cs, TranslationBlock*tb)
target/avr/cpu.c new file +129
-0+{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; + + env->pc_w = tb->pc /2 ;/* internally PC points to words */ +} + +static void avr_cpu_reset (CPUState *cs) +{ +AVRCPU *cpu =AVR_CPU (cs); +AVRCPUClass *mcc =AVR_CPU_GET_CLASS (cpu); +CPUAVRState *env = &cpu->env; + + mcc->parent_reset (cs); + + env->pc_w =0 ; + env->sregI =1 ; + env->sregC =0 ; + env->sregZ =0 ; + env->sregN =0 ; + env->sregV =0 ; + env->sregS =0 ; + env->sregH =0 ; + env->sregT =0 ; + + env->rampD =0 ; + env->rampX =0 ; + env->rampY =0 ; + env->rampZ =0 ; + env->eind =0 ; + env->sp =0 ; + + env->skip =0 ; + +memset (env->r,0 ,sizeof (env->r)); + +tlb_flush (cs); +} + +static void avr_cpu_disas_set_info (CPUState *cpu,disassemble_info *info) +{ + info->mach = bfd_arch_avr; + info->print_insn =NULL ; +} + +static void avr_cpu_realizefn (DeviceState *dev,Error **errp) +{ +CPUState *cs =CPU (dev); +AVRCPUClass *mcc =AVR_CPU_GET_CLASS (dev); +Error *local_err =NULL ; + +cpu_exec_realizefn (cs, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } +qemu_init_vcpu (cs); +cpu_reset (cs); + + mcc->parent_realize (dev, errp); +} + +static void avr_cpu_set_int (void *opaque,int irq,int level) +{ +AVRCPU *cpu = opaque; +CPUAVRState *env = &cpu->env; +CPUState *cs =CPU (cpu); + +uint64_t mask = (1ull << irq); +if (level) { + env->intsrc |= mask; +cpu_interrupt (cs,CPU_INTERRUPT_HARD ); + }else { + env->intsrc &= ~mask; +if (env->intsrc ==0 ) { +cpu_reset_interrupt (cs,CPU_INTERRUPT_HARD ); + } + } +} + +static void avr_cpu_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); + +cpu_set_cpustate_pointers (cpu); + +#ifndef CONFIG_USER_ONLY +/* Set the number of interrupts supported by the CPU. */ +qdev_init_gpio_in (DEVICE (cpu), avr_cpu_set_int, +sizeof (cpu->env.intsrc) *8 ); +#endif +} + +static ObjectClass *avr_cpu_class_by_name (const char *cpu_model) +{ +ObjectClass *oc; + + oc =object_class_by_name (cpu_model); +if (object_class_dynamic_cast (oc,TYPE_AVR_CPU ) ==NULL || +object_class_is_abstract (oc)) { + oc =NULL ; + } +return oc; +} + +static void avr_cpu_dump_state (CPUState *cs,FILE *f,int flags) +{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; +int i; + +qemu_fprintf (f,"\n" ); +qemu_fprintf (f,"PC: %06x\n" , env->pc_w); +qemu_fprintf (f,"SP: %04x\n" , env->sp); +qemu_fprintf (f,"rampD: %02x\n" , env->rampD >>16 ); +qemu_fprintf (f,"rampX: %02x\n" , env->rampX >>16 ); +qemu_fprintf (f,"rampY: %02x\n" , env->rampY >>16 ); +qemu_fprintf (f,"rampZ: %02x\n" , env->rampZ >>16 ); +qemu_fprintf (f,"EIND: %02x\n" , env->eind >>16 ); +qemu_fprintf (f,"X: %02x%02x\n" , env->r[27 ], env->r[26 ]); +qemu_fprintf (f,"Y: %02x%02x\n" , env->r[29 ], env->r[28 ]); +qemu_fprintf (f,"Z: %02x%02x\n" , env->r[31 ], env->r[30 ]); + qemu_fprintf(f, "SREG: [ %c %c %c %c %c %c %c %c ]\n", + env->sregI ? 'I' : '-', + env->sregT ? 'T' : '-', + env->sregH ? 'H' : '-', + env->sregS ? 'S' : '-', + env->sregV ? 'V' : '-', + env->sregN ? '-' : 'N', /* Zf has negative logic*/
target/avr/cpu.c new file +439
-0+ env->sregZ ?'Z' :'-' , + env->sregC ? 'I' : '-'); +qemu_fprintf (f,"SKIP: %02x\n" , env->skip); + +qemu_fprintf (f,"\n" ); +for (i =0 ; i <ARRAY_SIZE (env->r); i++) { +qemu_fprintf (f,"R[%02d]: %02x " , i, env->r[i]); + +if ((i %8 ) ==7 ) { +qemu_fprintf (f,"\n" ); + } + } +qemu_fprintf (f,"\n" ); +} + +static void avr_cpu_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +CPUClass *cc =CPU_CLASS (oc); +AVRCPUClass *mcc =AVR_CPU_CLASS (oc); + + mcc->parent_realize = dc->realize; + dc->realize = avr_cpu_realizefn; + + mcc->parent_reset = cc->reset; + cc->reset = avr_cpu_reset; + + cc->class_by_name = avr_cpu_class_by_name; + + cc->has_work = avr_cpu_has_work; + cc->do_interrupt = avr_cpu_do_interrupt; + cc->cpu_exec_interrupt = avr_cpu_exec_interrupt; + cc->dump_state = avr_cpu_dump_state; + cc->set_pc = avr_cpu_set_pc; +#if !defined(CONFIG_USER_ONLY ) + cc->memory_rw_debug = avr_cpu_memory_rw_debug; +#endif +#ifdef CONFIG_USER_ONLY + cc->handle_mmu_fault = avr_cpu_handle_mmu_fault; +#else + cc->get_phys_page_debug = avr_cpu_get_phys_page_debug; + cc->vmsd = &vms_avr_cpu; +#endif + cc->disas_set_info = avr_cpu_disas_set_info; + cc->tlb_fill = avr_cpu_tlb_fill; + cc->tcg_initialize = avr_cpu_tcg_init; + cc->synchronize_from_tb = avr_cpu_synchronize_from_tb; + cc->gdb_read_register = avr_cpu_gdb_read_register; + cc->gdb_write_register = avr_cpu_gdb_write_register; + cc->gdb_num_core_regs =35 ; + cc->gdb_core_xml_file ="avr-cpu.xml" ; +} + +static void avr_avr1_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +} + +static void avr_avr2_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +} + +static void avr_avr25_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +} + +static void avr_avr3_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +} + +static void avr_avr31_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +} + +static void avr_avr35_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +} + +static void avr_avr4_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +} + +static void avr_avr5_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +} + +static void avr_avr51_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +} + +static void avr_avr6_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_3_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_EIJMP_EICALL ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +} + +static void avr_avrtiny_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_1_BYTE_SP ); +} + +static void avr_xmega2_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega3_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega4_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega5_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPD ); +avr_set_feature (env,AVR_FEATURE_RAMPX ); +avr_set_feature (env,AVR_FEATURE_RAMPY ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega6_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_3_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_EIJMP_EICALL ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega7_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_3_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPD ); +avr_set_feature (env,AVR_FEATURE_RAMPX ); +avr_set_feature (env,AVR_FEATURE_RAMPY ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_EIJMP_EICALL ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +typedef struct AVRCPUInfo { +const char *name; +void (*initfn)(Object *obj); +}AVRCPUInfo ; + + +static void avr_cpu_list_entry (gpointer data,gpointer user_data) +{ +const char *typename =object_class_get_name (OBJECT_CLASS (data)); + +qemu_printf ("%s\n" , typename); +} + +void avr_cpu_list (void ) +{ +GSList *list; + list =object_class_get_list_sorted (TYPE_AVR_CPU , false); +g_slist_foreach (list, avr_cpu_list_entry,NULL ); +g_slist_free (list); +} + +#define DEFINE_AVR_CPU_TYPE (model, initfn) \ + { \ + .parent = TYPE_AVR_CPU, \ + .instance_init = initfn, \ + .name = AVR_CPU_TYPE_NAME(model), \ + } + +static const TypeInfo avr_cpu_type_info[] = { + { + .name =TYPE_AVR_CPU , + .parent =TYPE_CPU , + .instance_size =sizeof (AVRCPU ), + .instance_init = avr_cpu_initfn, + .class_size =sizeof (AVRCPUClass), + .class_init = avr_cpu_class_init, + .abstract = true, + }, +DEFINE_AVR_CPU_TYPE ("avrtiny" , avr_avrtiny_initfn), +DEFINE_AVR_CPU_TYPE ("avr1" , avr_avr1_initfn), +DEFINE_AVR_CPU_TYPE ("avr2" , avr_avr2_initfn), +DEFINE_AVR_CPU_TYPE ("avr25" , avr_avr25_initfn), +DEFINE_AVR_CPU_TYPE ("avr3" , avr_avr3_initfn), +DEFINE_AVR_CPU_TYPE ("avr31" , avr_avr31_initfn), +DEFINE_AVR_CPU_TYPE ("avr35" , avr_avr35_initfn), +DEFINE_AVR_CPU_TYPE ("avr4" , avr_avr4_initfn), +DEFINE_AVR_CPU_TYPE ("avr5" , avr_avr5_initfn), +DEFINE_AVR_CPU_TYPE ("avr51" , avr_avr51_initfn), +DEFINE_AVR_CPU_TYPE ("avr6" , avr_avr6_initfn), +DEFINE_AVR_CPU_TYPE ("xmega2" , avr_xmega2_initfn), +DEFINE_AVR_CPU_TYPE ("xmega3" , avr_xmega3_initfn), +DEFINE_AVR_CPU_TYPE ("xmega4" , avr_xmega4_initfn), +DEFINE_AVR_CPU_TYPE ("xmega5" , avr_xmega5_initfn), +DEFINE_AVR_CPU_TYPE ("xmega6" , avr_xmega6_initfn), +DEFINE_AVR_CPU_TYPE ("xmega7" , avr_xmega7_initfn), +}; + +const char *avr_flags_to_cpu_type(uint32_t flags, const char
*def_cpu_type)target/avr/cpu.c new file +42
-0+{ +switch (flags &EF_AVR_MACH ) { +case bfd_mach_avr1: +return AVR_CPU_TYPE_NAME ("avr1" ); +case bfd_mach_avr2: +return AVR_CPU_TYPE_NAME ("avr2" ); +case bfd_mach_avr25: +return AVR_CPU_TYPE_NAME ("avr25" ); +case bfd_mach_avr3: +return AVR_CPU_TYPE_NAME ("avr3" ); +case bfd_mach_avr31: +return AVR_CPU_TYPE_NAME ("avr31" ); +case bfd_mach_avr35: +return AVR_CPU_TYPE_NAME ("avr35" ); +case bfd_mach_avr4: +return AVR_CPU_TYPE_NAME ("avr4" ); +case bfd_mach_avr5: +return AVR_CPU_TYPE_NAME ("avr5" ); +case bfd_mach_avr51: +return AVR_CPU_TYPE_NAME ("avr51" ); +case bfd_mach_avr6: +return AVR_CPU_TYPE_NAME ("avr6" ); +case bfd_mach_avrtiny: +return AVR_CPU_TYPE_NAME ("avrtiny" ); +case bfd_mach_avrxmega2: +return AVR_CPU_TYPE_NAME ("xmega2" ); +case bfd_mach_avrxmega3: +return AVR_CPU_TYPE_NAME ("xmega3" ); +case bfd_mach_avrxmega4: +return AVR_CPU_TYPE_NAME ("xmega4" ); +case bfd_mach_avrxmega5: +return AVR_CPU_TYPE_NAME ("xmega5" ); +case bfd_mach_avrxmega6: +return AVR_CPU_TYPE_NAME ("xmega6" ); +case bfd_mach_avrxmega7: +return AVR_CPU_TYPE_NAME ("xmega7" ); +default : +return def_cpu_type; + } +} + +DEFINE_TYPES (avr_cpu_type_info)target/avr/gdbstub.c new file +84
-0@@ -0,0 +1,84 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#include "qemu/osdep.h" +#include "exec/gdbstub.h" + +int avr_cpu_gdb_read_register (CPUState *cs,uint8_t *mem_buf,int n) +{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; + +/* R */ +if (n <32 ) { +return gdb_get_reg8 (mem_buf, env->r[n]); + } + +/* SREG */ +if (n ==32 ) { +uint8_t sreg =cpu_get_sreg (env); + +return gdb_get_reg8 (mem_buf, sreg); + } + +/* SP */ +if (n ==33 ) { +return gdb_get_reg16 (mem_buf, env->sp &0x0000ffff ); + } + +/* PC */ +if (n ==34 ) { +return gdb_get_reg32 (mem_buf, env->pc_w *2 ); + } + +return 0 ; +} + +int avr_cpu_gdb_write_register (CPUState *cs,uint8_t *mem_buf,int n) +{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; + +/* R */ +if (n <32 ) { + env->r[n] = *mem_buf; +return 1 ; + } + +/* SREG */ +if (n ==32 ) { +cpu_set_sreg (env, *mem_buf); +return 1 ; + } + +/* SP */ +if (n ==33 ) { + env->sp =lduw_p (mem_buf); +return 2 ; + } + +/* PC */ +if (n ==34 ) { + env->pc_w =ldl_p (mem_buf) /2 ; +return 4 ; + } + +return 0 ; +}target/avr/machine.c new file +121
-0@@ -0,0 +1,121 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "migration/cpu.h" + +static int get_sreg (QEMUFile *f,void *opaque,size_t size, +const VMStateField *field) +{ +CPUAVRState *env = opaque; +uint8_t sreg; + + sreg =qemu_get_byte (f); +cpu_set_sreg (env, sreg); +return 0 ; +} + +static int put_sreg ( +QEMUFile *f,void *opaque,size_t size, +const VMStateField *field,QJSON *vmdesc) +{ +CPUAVRState *env = opaque; +uint8_t sreg =cpu_get_sreg (env); + +qemu_put_byte (f, sreg); +return 0 ; +} + +static const VMStateInfo vms_sreg = { + .name ="sreg" , + .get = get_sreg, + .put = put_sreg, +}; + +static int get_segment ( +QEMUFile *f,void *opaque,size_t size,const VMStateField *field) +{ +uint32_t *ramp = opaque; +uint8_t temp; + + temp =qemu_get_byte (f); + *ramp = ((uint32_t )temp) <<16 ; +return 0 ; +} + +static int put_segment ( +QEMUFile *f,void *opaque,size_t size, +const VMStateField *field,QJSON *vmdesc) +{ +uint32_t *ramp = opaque; +uint8_t temp = *ramp >>16 ; + +qemu_put_byte (f, temp); +return 0 ; +} + +static const VMStateInfo vms_rampD = { + .name ="rampD" , + .get = get_segment, + .put = put_segment, +}; +static const VMStateInfo vms_rampX = { + .name ="rampX" , + .get = get_segment, + .put = put_segment, +}; +static const VMStateInfo vms_rampY = { + .name ="rampY" , + .get = get_segment, + .put = put_segment, +}; +static const VMStateInfo vms_rampZ = { + .name ="rampZ" , + .get = get_segment, + .put = put_segment, +}; +static const VMStateInfo vms_eind = { + .name ="eind" , + .get = get_segment, + .put = put_segment, +}; + +const VMStateDescription vms_avr_cpu = { + .name ="cpu" , + .version_id =0 , + .minimum_version_id =0 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (env.pc_w,AVRCPU ), +VMSTATE_UINT32 (env.sp,AVRCPU ), +VMSTATE_UINT32 (env.skip,AVRCPU ), + +VMSTATE_UINT32_ARRAY (env.r,AVRCPU ,NUMBER_OF_CPU_REGISTERS ), + +VMSTATE_SINGLE (env,AVRCPU ,0 , vms_sreg, CPUAVRState), +VMSTATE_SINGLE (env.rampD,AVRCPU ,0 , vms_rampD, uint32_t), +VMSTATE_SINGLE (env.rampX,AVRCPU ,0 , vms_rampX, uint32_t), +VMSTATE_SINGLE (env.rampY,AVRCPU ,0 , vms_rampY, uint32_t), +VMSTATE_SINGLE (env.rampZ,AVRCPU ,0 , vms_rampZ, uint32_t), +VMSTATE_SINGLE (env.eind,AVRCPU ,0 , vms_eind, uint32_t), + +VMSTATE_END_OF_LIST () + } +};gdb-xml/avr-cpu.xml new file +49
-1@@ -0,0 +1,49 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!-- Register numbers are hard-coded in order to maintain backward + compatibility with older versions of tools that didn't use xml + register descriptions. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<feature name="org.gnu.gdb.riscv.cpu"> + <reg name="r0" bitsize="8" type="int" regnum="0"/> + <reg name="r1" bitsize="8" type="int"/> + <reg name="r2" bitsize="8" type="int"/> + <reg name="r3" bitsize="8" type="int"/> + <reg name="r4" bitsize="8" type="int"/> + <reg name="r5" bitsize="8" type="int"/> + <reg name="r6" bitsize="8" type="int"/> + <reg name="r7" bitsize="8" type="int"/> + <reg name="r8" bitsize="8" type="int"/> + <reg name="r9" bitsize="8" type="int"/> + <reg name="r10" bitsize="8" type="int"/> + <reg name="r11" bitsize="8" type="int"/> + <reg name="r12" bitsize="8" type="int"/> + <reg name="r13" bitsize="8" type="int"/> + <reg name="r14" bitsize="8" type="int"/> + <reg name="r15" bitsize="8" type="int"/> + <reg name="r16" bitsize="8" type="int"/> + <reg name="r17" bitsize="8" type="int"/> + <reg name="r18" bitsize="8" type="int"/> + <reg name="r19" bitsize="8" type="int"/> + <reg name="r20" bitsize="8" type="int"/> + <reg name="r21" bitsize="8" type="int"/> + <reg name="r22" bitsize="8" type="int"/> + <reg name="r23" bitsize="8" type="int"/> + <reg name="r24" bitsize="8" type="int"/> + <reg name="r25" bitsize="8" type="int"/> + <reg name="r26" bitsize="8" type="int"/> + <reg name="r27" bitsize="8" type="int"/> + <reg name="r28" bitsize="8" type="int"/> + <reg name="r29" bitsize="8" type="int"/> + <reg name="r30" bitsize="8" type="int"/> + <reg name="r31" bitsize="8" type="int"/> + <reg name="sreg" bitsize="8" type="int"/> + <reg name="sp" bitsize="8" type="int"/> + <reg name="pc" bitsize="8" type="int"/> +</feature> --2.17.2 (Apple Git-113)
Re: [PATCH v39 01/22] target/avr: Add outward facing interfaces and core CPU logic
Hi Aleksandar,
Quoted 41 lines · Aleksandar Markovic
On Wednesday, December 18, 2019, Michael Rolnik <[email protected] <mailto:[email protected]>> wrote:
This includes: - CPU data structures - object model classes and functions - migration functions - GDB hooks Co-developed-by: Michael Rolnik <[email protected] <mailto:[email protected]>> Co-developed-by: Sarah Harris <[email protected] <mailto:[email protected]>> Signed-off-by: Michael Rolnik <[email protected] <mailto:[email protected]>> Signed-off-by: Sarah Harris <[email protected] <mailto:[email protected]>> Signed-off-by: Michael Rolnik <[email protected] <mailto:[email protected]>> Acked-by: Igor Mammedov <[email protected] <mailto:[email protected]>> Tested-by: Philippe Mathieu-Daudé <[email protected] <mailto:[email protected]>> --- target/avr/cpu-param.h | 37 +++ target/avr/cpu-qom.h | 54 ++++ target/avr/cpu.h | 258 ++++++++++++++++ target/avr/cpu.c | 654 +++++++++++++++++++++++++++++++++++++++++ target/avr/gdbstub.c | 84 ++++++ target/avr/machine.c | 121 ++++++++ gdb-xml/avr-cpu.xml | 49 +++ 7 files changed, 1257 insertions(+) create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/cpu.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/machine.c create mode 100644 gdb-xml/avr-cpu.xml
[...]
Quoted 38 lines
+typedef enum AVRFeature {
+AVR_FEATURE_SRAM,
+
+AVR_FEATURE_1_BYTE_PC,
+AVR_FEATURE_2_BYTE_PC,
+AVR_FEATURE_3_BYTE_PC,
+
+AVR_FEATURE_1_BYTE_SP,
+AVR_FEATURE_2_BYTE_SP,
+
+AVR_FEATURE_BREAK,
+AVR_FEATURE_DES,
+AVR_FEATURE_RMW, /* Read Modify Write - XCH LAC LAS LAT */ +
+AVR_FEATURE_EIJMP_EICALL,
+AVR_FEATURE_IJMP_ICALL,
+AVR_FEATURE_JMP_CALL,
+
+AVR_FEATURE_ADIW_SBIW,
+
+AVR_FEATURE_SPM,
+AVR_FEATURE_SPMX,
+
+AVR_FEATURE_ELPMX,
+AVR_FEATURE_ELPM,
+AVR_FEATURE_LPMX,
+AVR_FEATURE_LPM,
+
+AVR_FEATURE_MOVW,
+AVR_FEATURE_MUL,
+AVR_FEATURE_RAMPD,
+AVR_FEATURE_RAMPX,
+AVR_FEATURE_RAMPY,
+AVR_FEATURE_RAMPZ,
+} AVRFeature;
+
Quoted 3 lines
Very good! Now, each feature should have some really brief (less than say 45 characters) comment in the same line as the definition, like this one:
AVR_FEATURE_MOVW, /* supports MOVW instruction */
IMHO this looks overkill when the name is already obvious. In some cases we can explicit, such 'RMW'.
Maybe we can simply group the features by type with a single comment previous the group, such:
/* Instructions */
AVR_FEATURE_MOVW,
AVR_FEATURE_MUL,
AVR_FEATURE_RMW, /* Read Modify Write - XCH LAC LAS LAT */
...Quoted 4 lines
You already did it for
AVR_FEATURE_RMWOf course, all such comments should be vertically aligned nicely.
Re: [PATCH v39 01/22] target/avr: Add outward facing interfaces and core CPU logic
In reply to Michael RolnikQuoted 625 lines · Michael Rolnik
This includes:
- CPU data structures
- object model classes and functions
- migration functions
- GDB hooksCo-developed-by Michael Rolnik <[email protected]>Co-developed-by Sarah Harris <[email protected]>Signed-off-by Michael Rolnik <[email protected]>Signed-off-by Sarah Harris <[email protected]>Signed-off-by Michael Rolnik <[email protected]>Acked-by Igor Mammedov <[email protected]>--- target/avr/cpu-param.h | 37 +++ target/avr/cpu-qom.h | 54 ++++ target/avr/cpu.h | 258 ++++++++++++++++ target/avr/cpu.c | 654 +++++++++++++++++++++++++++++++++++++++++ target/avr/gdbstub.c | 84 ++++++ target/avr/machine.c | 121 ++++++++ gdb-xml/avr-cpu.xml | 49 +++ 7 files changed, 1257 insertions(+) create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/cpu.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/machine.c create mode 100644 gdb-xml/avr-cpu.xmltarget/avr/cpu-param.h new file +37
-0@@ -0,0 +1,37 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#ifndef AVR_CPU_PARAM_H +#define AVR_CPU_PARAM_H + +#define TARGET_LONG_BITS 32 +/* +* TARGET_PAGE_BITS cannot be more than 8 bits because +* 1. all IO registers occupy [0x0000 .. 0x00ff] address range, and they +* should be implemented as a device and not memory +* 2. SRAM starts at the address 0x0100 +*/ +#define TARGET_PAGE_BITS 8 +#define TARGET_PHYS_ADDR_SPACE_BITS 24 +#define TARGET_VIRT_ADDR_SPACE_BITS 24 +#define NB_MMU_MODES 2 + + +#endif target/avr/cpu-qom.h new file +54
-0@@ -0,0 +1,54 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#ifndef QEMU_AVR_QOM_H +#define QEMU_AVR_QOM_H + +#include "hw/core/cpu.h" + +#define TYPE_AVR_CPU "avr-cpu" + +#define AVR_CPU_CLASS (klass) \ + OBJECT_CLASS_CHECK(AVRCPUClass, (klass), TYPE_AVR_CPU) +#define AVR_CPU (obj) \ + OBJECT_CHECK(AVRCPU, (obj), TYPE_AVR_CPU) +#define AVR_CPU_GET_CLASS (obj) \ + OBJECT_GET_CLASS(AVRCPUClass, (obj), TYPE_AVR_CPU) + +/** +* AVRCPUClass: +* @parent_realize: The parent class' realize handler. +* @parent_reset: The parent class' reset handler. +* @vr: Version Register value. +* +* A AVR CPU model. +*/ +typedef struct AVRCPUClass { +/*< private >*/ +CPUClass parent_class; +/*< public >*/ +DeviceRealize parent_realize; +void (*parent_reset)(CPUState *cpu); +}AVRCPUClass ; + +typedef struct AVRCPU AVRCPU ; + + +#endif /* !defined (QEMU_AVR_CPU_QOM_H) */ target/avr/cpu.h new file +198
-0@@ -0,0 +1,258 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#ifndef QEMU_AVR_CPU_H +#define QEMU_AVR_CPU_H + +#include "cpu-qom.h" +#include "exec/cpu-defs.h" + +#define TCG_GUEST_DEFAULT_MO 0 +#define AVR_CPU_TYPE_SUFFIX "-" TYPE_AVR_CPU +#define AVR_CPU_TYPE_NAME (name) (name AVR_CPU_TYPE_SUFFIX) +#define CPU_RESOLVING_TYPE TYPE_AVR_CPU + +/* +* AVR has two memory spaces, data & code. +* e.g. both have 0 address +* ST/LD instructions access data space +* LPM/SPM and instruction fetching access code memory space +*/ +#define MMU_CODE_IDX 0 +#define MMU_DATA_IDX 1 + +#define EXCP_RESET 1 +#define EXCP_INT (n) (EXCP_RESET + (n) + 1) + +/* Number of CPU registers */ +#define NUMBER_OF_CPU_REGISTERS 32 +/* Number of IO registers accessible by ld/st/in/out */ +#define NUMBER_OF_IO_REGISTERS 64 + +/* +* Offsets of AVR memory regions in host memory space. +* +* This is needed because the AVR has separate code and data address +* spaces that both have start from zero but have to go somewhere in +* host memory. +* +* It's also useful to know where some things are, like the IO registers. +*/ +/* Flash program memory */ +#define OFFSET_CODE 0x00000000 +/* CPU registers, IO registers, and SRAM */ +#define OFFSET_DATA 0x00800000 +/* CPU registers specifically, these are mapped at the start of data */ +#define OFFSET_CPU_REGISTERS OFFSET_DATA +/* +* IO registers, including status register, stack pointer, and memory +* mapped peripherals, mapped just after CPU registers +*/ +#define OFFSET_IO_REGISTERS (OFFSET_DATA + NUMBER_OF_CPU_REGISTERS) + +#define EF_AVR_MACH 0x7F + +typedef enum AVRFeature { +AVR_FEATURE_SRAM , + +AVR_FEATURE_1_BYTE_PC , +AVR_FEATURE_2_BYTE_PC , +AVR_FEATURE_3_BYTE_PC , + +AVR_FEATURE_1_BYTE_SP , +AVR_FEATURE_2_BYTE_SP , + +AVR_FEATURE_BREAK , +AVR_FEATURE_DES , +AVR_FEATURE_RMW ,/* Read Modify Write - XCH LAC LAS LAT */ + +AVR_FEATURE_EIJMP_EICALL , +AVR_FEATURE_IJMP_ICALL , +AVR_FEATURE_JMP_CALL , + +AVR_FEATURE_ADIW_SBIW , + +AVR_FEATURE_SPM , +AVR_FEATURE_SPMX , + +AVR_FEATURE_ELPMX , +AVR_FEATURE_ELPM , +AVR_FEATURE_LPMX , +AVR_FEATURE_LPM , + +AVR_FEATURE_MOVW , +AVR_FEATURE_MUL , +AVR_FEATURE_RAMPD , +AVR_FEATURE_RAMPX , +AVR_FEATURE_RAMPY , +AVR_FEATURE_RAMPZ , +}AVRFeature ; + +typedef struct CPUAVRState CPUAVRState ; + +struct CPUAVRState { +uint32_t pc_w;/* 0x003fffff up to 22 bits */ + +uint32_t sregC;/* 0x00000001 1 bit */ +uint32_t sregZ;/* 0x00000001 1 bit */ +uint32_t sregN;/* 0x00000001 1 bit */ +uint32_t sregV;/* 0x00000001 1 bit */ +uint32_t sregS;/* 0x00000001 1 bit */ +uint32_t sregH;/* 0x00000001 1 bit */ +uint32_t sregT;/* 0x00000001 1 bit */ +uint32_t sregI;/* 0x00000001 1 bit */ + +uint32_t rampD;/* 0x00ff0000 8 bits */ +uint32_t rampX;/* 0x00ff0000 8 bits */ +uint32_t rampY;/* 0x00ff0000 8 bits */ +uint32_t rampZ;/* 0x00ff0000 8 bits */ +uint32_t eind;/* 0x00ff0000 8 bits */ + +uint32_t r[NUMBER_OF_CPU_REGISTERS ];/* 8 bits each */ +uint32_t sp;/* 16 bits */ + +uint32_t skip;/* if set skip instruction */ + +uint64_t intsrc;/* interrupt sources */ +bool fullacc;/* CPU/MEM if true MEM only otherwise */ + +uint32_t features; +}; + +/** +* AVRCPU: +* @env: #CPUAVRState +* +* A AVR CPU. +*/ +typedef struct AVRCPU { +/*< private >*/ +CPUState parent_obj; +/*< public >*/ + +CPUNegativeOffsetState neg; +CPUAVRState env; +}AVRCPU ; + +#ifndef CONFIG_USER_ONLY +extern const struct VMStateDescription vms_avr_cpu; +#endif + +void avr_cpu_do_interrupt (CPUState *cpu); +bool avr_cpu_exec_interrupt (CPUState *cpu,int int_req); +hwaddr avr_cpu_get_phys_page_debug (CPUState *cpu,vaddr addr); +int avr_cpu_gdb_read_register (CPUState *cpu,uint8_t *buf,int reg); +int avr_cpu_gdb_write_register (CPUState *cpu,uint8_t *buf,int reg); + +static inline int avr_feature (CPUAVRState *env,AVRFeature feature) +{ +return (env->features & (1U << feature)) !=0 ; +} + +static inline void avr_set_feature (CPUAVRState *env,int feature) +{ + env->features |= (1U << feature); +} + +#define cpu_list avr_cpu_list +#define cpu_signal_handler cpu_avr_signal_handler +#define cpu_mmu_index avr_cpu_mmu_index + +static inline int avr_cpu_mmu_index (CPUAVRState *env,bool ifetch) +{ +return ifetch ?MMU_CODE_IDX :MMU_DATA_IDX ; +} + +void avr_cpu_tcg_init (void ); + +void avr_cpu_list (void ); +int cpu_avr_exec (CPUState *cpu); +int cpu_avr_signal_handler (int host_signum,void *pinfo,void *puc); +int avr_cpu_handle_mmu_fault (CPUState *cpu,vaddr address,int size, +int rw,int mmu_idx); +int avr_cpu_memory_rw_debug (CPUState *cs,vaddr address,uint8_t *buf, +int len,bool is_write); + +enum { +TB_FLAGS_FULL_ACCESS =1 , +TB_FLAGS_SKIP =2 , +}; + +static inline void cpu_get_tb_cpu_state(CPUAVRState *env, target_ulong*pc,
target/avr/cpu.h new file +58
-0+ target_ulong *cs_base, uint32_t *pflags) +{ +uint32_t flags =0 ; + + *pc = env->pc_w *2 ; + *cs_base =0 ; + +if (env->fullacc) { + flags |=TB_FLAGS_FULL_ACCESS ; + } +if (env->skip) { + flags |=TB_FLAGS_SKIP ; + } + + *pflags = flags; +} + +static inline int cpu_interrupts_enabled (CPUAVRState *env) +{ +return env->sregI !=0 ; +} + +static inline uint8_t cpu_get_sreg (CPUAVRState *env) +{ +uint8_t sreg; + sreg = (env->sregC) <<0 + | (env->sregZ) <<1 + | (env->sregN) <<2 + | (env->sregV) <<3 + | (env->sregS) <<4 + | (env->sregH) <<5 + | (env->sregT) <<6 + | (env->sregI) <<7 ; +return sreg; +} + +static inline void cpu_set_sreg (CPUAVRState *env,uint8_t sreg) +{ + env->sregC = (sreg >>0 ) &0x01 ; + env->sregZ = (sreg >>1 ) &0x01 ; + env->sregN = (sreg >>2 ) &0x01 ; + env->sregV = (sreg >>3 ) &0x01 ; + env->sregS = (sreg >>4 ) &0x01 ; + env->sregH = (sreg >>5 ) &0x01 ; + env->sregT = (sreg >>6 ) &0x01 ; + env->sregI = (sreg >>7 ) &0x01 ; +} + +bool avr_cpu_tlb_fill (CPUState *cs,vaddr address,int size, +MMUAccessType access_type,int mmu_idx, +bool probe,uintptr_t retaddr); + +typedef CPUAVRState CPUArchState ; +typedef AVRCPU ArchCPU ; + +#include "exec/cpu-all.h" + +const char *avr_flags_to_cpu_type(uint32_t flags, const char
*def_cpu_type);target/avr/cpu.h new file +2
-0+ +#endif /* !defined (QEMU_AVR_CPU_H) */ target/avr/cpu.c new file +40
-0@@ -0,0 +1,654 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/qemu-print.h" +#include "exec/exec-all.h" +#include "cpu.h" +#include "disas/dis-asm.h" + +static void avr_cpu_set_pc (CPUState *cs,vaddr value) +{ +AVRCPU *cpu =AVR_CPU (cs); + + cpu->env.pc_w = value /2 ;/* internally PC points to words */ +} + +static bool avr_cpu_has_work (CPUState *cs) +{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; + + return (cs->interrupt_request & (CPU_INTERRUPT_HARD |
CPU_INTERRUPT_RESET))target/avr/cpu.c new file +4
-0+ &&cpu_interrupts_enabled (env); +} + +static void avr_cpu_synchronize_from_tb(CPUState *cs, TranslationBlock*tb)
target/avr/cpu.c new file +129
-0+{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; + + env->pc_w = tb->pc /2 ;/* internally PC points to words */ +} + +static void avr_cpu_reset (CPUState *cs) +{ +AVRCPU *cpu =AVR_CPU (cs); +AVRCPUClass *mcc =AVR_CPU_GET_CLASS (cpu); +CPUAVRState *env = &cpu->env; + + mcc->parent_reset (cs); + + env->pc_w =0 ; + env->sregI =1 ; + env->sregC =0 ; + env->sregZ =0 ; + env->sregN =0 ; + env->sregV =0 ; + env->sregS =0 ; + env->sregH =0 ; + env->sregT =0 ; + + env->rampD =0 ; + env->rampX =0 ; + env->rampY =0 ; + env->rampZ =0 ; + env->eind =0 ; + env->sp =0 ; + + env->skip =0 ; + +memset (env->r,0 ,sizeof (env->r)); + +tlb_flush (cs); +} + +static void avr_cpu_disas_set_info (CPUState *cpu,disassemble_info *info) +{ + info->mach = bfd_arch_avr; + info->print_insn =NULL ; +} + +static void avr_cpu_realizefn (DeviceState *dev,Error **errp) +{ +CPUState *cs =CPU (dev); +AVRCPUClass *mcc =AVR_CPU_GET_CLASS (dev); +Error *local_err =NULL ; + +cpu_exec_realizefn (cs, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } +qemu_init_vcpu (cs); +cpu_reset (cs); + + mcc->parent_realize (dev, errp); +} + +static void avr_cpu_set_int (void *opaque,int irq,int level) +{ +AVRCPU *cpu = opaque; +CPUAVRState *env = &cpu->env; +CPUState *cs =CPU (cpu); + +uint64_t mask = (1ull << irq); +if (level) { + env->intsrc |= mask; +cpu_interrupt (cs,CPU_INTERRUPT_HARD ); + }else { + env->intsrc &= ~mask; +if (env->intsrc ==0 ) { +cpu_reset_interrupt (cs,CPU_INTERRUPT_HARD ); + } + } +} + +static void avr_cpu_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); + +cpu_set_cpustate_pointers (cpu); + +#ifndef CONFIG_USER_ONLY +/* Set the number of interrupts supported by the CPU. */ +qdev_init_gpio_in (DEVICE (cpu), avr_cpu_set_int, +sizeof (cpu->env.intsrc) *8 ); +#endif +} + +static ObjectClass *avr_cpu_class_by_name (const char *cpu_model) +{ +ObjectClass *oc; + + oc =object_class_by_name (cpu_model); +if (object_class_dynamic_cast (oc,TYPE_AVR_CPU ) ==NULL || +object_class_is_abstract (oc)) { + oc =NULL ; + } +return oc; +} + +static void avr_cpu_dump_state (CPUState *cs,FILE *f,int flags) +{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; +int i; + +qemu_fprintf (f,"\n" ); +qemu_fprintf (f,"PC: %06x\n" , env->pc_w); +qemu_fprintf (f,"SP: %04x\n" , env->sp); +qemu_fprintf (f,"rampD: %02x\n" , env->rampD >>16 ); +qemu_fprintf (f,"rampX: %02x\n" , env->rampX >>16 ); +qemu_fprintf (f,"rampY: %02x\n" , env->rampY >>16 ); +qemu_fprintf (f,"rampZ: %02x\n" , env->rampZ >>16 ); +qemu_fprintf (f,"EIND: %02x\n" , env->eind >>16 ); +qemu_fprintf (f,"X: %02x%02x\n" , env->r[27 ], env->r[26 ]); +qemu_fprintf (f,"Y: %02x%02x\n" , env->r[29 ], env->r[28 ]); +qemu_fprintf (f,"Z: %02x%02x\n" , env->r[31 ], env->r[30 ]); + qemu_fprintf(f, "SREG: [ %c %c %c %c %c %c %c %c ]\n", + env->sregI ? 'I' : '-', + env->sregT ? 'T' : '-', + env->sregH ? 'H' : '-', + env->sregS ? 'S' : '-', + env->sregV ? 'V' : '-', + env->sregN ? '-' : 'N', /* Zf has negative logic*/
target/avr/cpu.c new file +44
-0+ env->sregZ ?'Z' :'-' , + env->sregC ? 'I' : '-'); +qemu_fprintf (f,"SKIP: %02x\n" , env->skip); + +qemu_fprintf (f,"\n" ); +for (i =0 ; i <ARRAY_SIZE (env->r); i++) { +qemu_fprintf (f,"R[%02d]: %02x " , i, env->r[i]); + +if ((i %8 ) ==7 ) { +qemu_fprintf (f,"\n" ); + } + } +qemu_fprintf (f,"\n" ); +} + +static void avr_cpu_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); +CPUClass *cc =CPU_CLASS (oc); +AVRCPUClass *mcc =AVR_CPU_CLASS (oc); + + mcc->parent_realize = dc->realize; + dc->realize = avr_cpu_realizefn; + + mcc->parent_reset = cc->reset; + cc->reset = avr_cpu_reset; + + cc->class_by_name = avr_cpu_class_by_name; + + cc->has_work = avr_cpu_has_work; + cc->do_interrupt = avr_cpu_do_interrupt; + cc->cpu_exec_interrupt = avr_cpu_exec_interrupt; + cc->dump_state = avr_cpu_dump_state; + cc->set_pc = avr_cpu_set_pc; +#if !defined(CONFIG_USER_ONLY ) + cc->memory_rw_debug = avr_cpu_memory_rw_debug; +#endif +#ifdef CONFIG_USER_ONLY + cc->handle_mmu_fault = avr_cpu_handle_mmu_fault; +#else + cc->get_phys_page_debug = avr_cpu_get_phys_page_debug; + cc->vmsd = &vms_avr_cpu; +#endif + cc->disas_set_info = avr_cpu_disas_set_info;
target/avr/cpu.c line 227
Quoted 10 lines
target/avr/cpu.c new file +10
-0+ cc->tlb_fill = avr_cpu_tlb_fill; + cc->tcg_initialize = avr_cpu_tcg_init; + cc->synchronize_from_tb = avr_cpu_synchronize_from_tb; + cc->gdb_read_register = avr_cpu_gdb_read_register; + cc->gdb_write_register = avr_cpu_gdb_write_register; + cc->gdb_num_core_regs =35 ; + cc->gdb_core_xml_file ="avr-cpu.xml" ; +} + +static void avr_avr1_initfn (Object *obj)
Please add the following comment before this line:
/*
* Setting features of AVR core type avr1
* --------------------------------------
*
* This type of AVR core is present in the following AVR MCUs:
*
* attiny11, attiny12, attiny15, attiny28, at90s1200 */
(I used https://gcc.gnu.org/onlinedocs/gcc/AVR-Options.html as the source of this information)
And than the same for all AVR core types that follow.
+{
Quoted 703 lines
target/avr/cpu.c new file +384
-0+AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +} + +static void avr_avr2_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +} + +static void avr_avr25_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +} + +static void avr_avr3_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +} + +static void avr_avr31_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +} + +static void avr_avr35_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +} + +static void avr_avr4_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +} + +static void avr_avr5_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +} + +static void avr_avr51_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +} + +static void avr_avr6_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_3_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_EIJMP_EICALL ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +} + +static void avr_avrtiny_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_1_BYTE_SP ); +} + +static void avr_xmega2_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega3_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega4_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega5_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_2_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPD ); +avr_set_feature (env,AVR_FEATURE_RAMPX ); +avr_set_feature (env,AVR_FEATURE_RAMPY ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega6_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_3_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_EIJMP_EICALL ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +static void avr_xmega7_initfn (Object *obj) +{ +AVRCPU *cpu =AVR_CPU (obj); +CPUAVRState *env = &cpu->env; + +avr_set_feature (env,AVR_FEATURE_LPM ); +avr_set_feature (env,AVR_FEATURE_IJMP_ICALL ); +avr_set_feature (env,AVR_FEATURE_ADIW_SBIW ); +avr_set_feature (env,AVR_FEATURE_SRAM ); +avr_set_feature (env,AVR_FEATURE_BREAK ); + +avr_set_feature (env,AVR_FEATURE_3_BYTE_PC ); +avr_set_feature (env,AVR_FEATURE_2_BYTE_SP ); +avr_set_feature (env,AVR_FEATURE_RAMPD ); +avr_set_feature (env,AVR_FEATURE_RAMPX ); +avr_set_feature (env,AVR_FEATURE_RAMPY ); +avr_set_feature (env,AVR_FEATURE_RAMPZ ); +avr_set_feature (env,AVR_FEATURE_EIJMP_EICALL ); +avr_set_feature (env,AVR_FEATURE_ELPMX ); +avr_set_feature (env,AVR_FEATURE_ELPM ); +avr_set_feature (env,AVR_FEATURE_JMP_CALL ); +avr_set_feature (env,AVR_FEATURE_LPMX ); +avr_set_feature (env,AVR_FEATURE_MOVW ); +avr_set_feature (env,AVR_FEATURE_MUL ); +avr_set_feature (env,AVR_FEATURE_RMW ); +} + +typedef struct AVRCPUInfo { +const char *name; +void (*initfn)(Object *obj); +}AVRCPUInfo ; + + +static void avr_cpu_list_entry (gpointer data,gpointer user_data) +{ +const char *typename =object_class_get_name (OBJECT_CLASS (data)); + +qemu_printf ("%s\n" , typename); +} + +void avr_cpu_list (void ) +{ +GSList *list; + list =object_class_get_list_sorted (TYPE_AVR_CPU , false); +g_slist_foreach (list, avr_cpu_list_entry,NULL ); +g_slist_free (list); +} + +#define DEFINE_AVR_CPU_TYPE (model, initfn) \ + { \ + .parent = TYPE_AVR_CPU, \ + .instance_init = initfn, \ + .name = AVR_CPU_TYPE_NAME(model), \ + } + +static const TypeInfo avr_cpu_type_info[] = { + { + .name =TYPE_AVR_CPU , + .parent =TYPE_CPU , + .instance_size =sizeof (AVRCPU ), + .instance_init = avr_cpu_initfn, + .class_size =sizeof (AVRCPUClass), + .class_init = avr_cpu_class_init, + .abstract = true, + }, +DEFINE_AVR_CPU_TYPE ("avrtiny" , avr_avrtiny_initfn), +DEFINE_AVR_CPU_TYPE ("avr1" , avr_avr1_initfn), +DEFINE_AVR_CPU_TYPE ("avr2" , avr_avr2_initfn), +DEFINE_AVR_CPU_TYPE ("avr25" , avr_avr25_initfn), +DEFINE_AVR_CPU_TYPE ("avr3" , avr_avr3_initfn), +DEFINE_AVR_CPU_TYPE ("avr31" , avr_avr31_initfn), +DEFINE_AVR_CPU_TYPE ("avr35" , avr_avr35_initfn), +DEFINE_AVR_CPU_TYPE ("avr4" , avr_avr4_initfn), +DEFINE_AVR_CPU_TYPE ("avr5" , avr_avr5_initfn), +DEFINE_AVR_CPU_TYPE ("avr51" , avr_avr51_initfn), +DEFINE_AVR_CPU_TYPE ("avr6" , avr_avr6_initfn), +DEFINE_AVR_CPU_TYPE ("xmega2" , avr_xmega2_initfn), +DEFINE_AVR_CPU_TYPE ("xmega3" , avr_xmega3_initfn), +DEFINE_AVR_CPU_TYPE ("xmega4" , avr_xmega4_initfn), +DEFINE_AVR_CPU_TYPE ("xmega5" , avr_xmega5_initfn), +DEFINE_AVR_CPU_TYPE ("xmega6" , avr_xmega6_initfn), +DEFINE_AVR_CPU_TYPE ("xmega7" , avr_xmega7_initfn), +}; + +const char *avr_flags_to_cpu_type(uint32_t flags, const char
*def_cpu_type)target/avr/cpu.c new file +42
-0+{ +switch (flags &EF_AVR_MACH ) { +case bfd_mach_avr1: +return AVR_CPU_TYPE_NAME ("avr1" ); +case bfd_mach_avr2: +return AVR_CPU_TYPE_NAME ("avr2" ); +case bfd_mach_avr25: +return AVR_CPU_TYPE_NAME ("avr25" ); +case bfd_mach_avr3: +return AVR_CPU_TYPE_NAME ("avr3" ); +case bfd_mach_avr31: +return AVR_CPU_TYPE_NAME ("avr31" ); +case bfd_mach_avr35: +return AVR_CPU_TYPE_NAME ("avr35" ); +case bfd_mach_avr4: +return AVR_CPU_TYPE_NAME ("avr4" ); +case bfd_mach_avr5: +return AVR_CPU_TYPE_NAME ("avr5" ); +case bfd_mach_avr51: +return AVR_CPU_TYPE_NAME ("avr51" ); +case bfd_mach_avr6: +return AVR_CPU_TYPE_NAME ("avr6" ); +case bfd_mach_avrtiny: +return AVR_CPU_TYPE_NAME ("avrtiny" ); +case bfd_mach_avrxmega2: +return AVR_CPU_TYPE_NAME ("xmega2" ); +case bfd_mach_avrxmega3: +return AVR_CPU_TYPE_NAME ("xmega3" ); +case bfd_mach_avrxmega4: +return AVR_CPU_TYPE_NAME ("xmega4" ); +case bfd_mach_avrxmega5: +return AVR_CPU_TYPE_NAME ("xmega5" ); +case bfd_mach_avrxmega6: +return AVR_CPU_TYPE_NAME ("xmega6" ); +case bfd_mach_avrxmega7: +return AVR_CPU_TYPE_NAME ("xmega7" ); +default : +return def_cpu_type; + } +} + +DEFINE_TYPES (avr_cpu_type_info)target/avr/gdbstub.c new file +84
-0@@ -0,0 +1,84 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#include "qemu/osdep.h" +#include "exec/gdbstub.h" + +int avr_cpu_gdb_read_register (CPUState *cs,uint8_t *mem_buf,int n) +{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; + +/* R */ +if (n <32 ) { +return gdb_get_reg8 (mem_buf, env->r[n]); + } + +/* SREG */ +if (n ==32 ) { +uint8_t sreg =cpu_get_sreg (env); + +return gdb_get_reg8 (mem_buf, sreg); + } + +/* SP */ +if (n ==33 ) { +return gdb_get_reg16 (mem_buf, env->sp &0x0000ffff ); + } + +/* PC */ +if (n ==34 ) { +return gdb_get_reg32 (mem_buf, env->pc_w *2 ); + } + +return 0 ; +} + +int avr_cpu_gdb_write_register (CPUState *cs,uint8_t *mem_buf,int n) +{ +AVRCPU *cpu =AVR_CPU (cs); +CPUAVRState *env = &cpu->env; + +/* R */ +if (n <32 ) { + env->r[n] = *mem_buf; +return 1 ; + } + +/* SREG */ +if (n ==32 ) { +cpu_set_sreg (env, *mem_buf); +return 1 ; + } + +/* SP */ +if (n ==33 ) { + env->sp =lduw_p (mem_buf); +return 2 ; + } + +/* PC */ +if (n ==34 ) { + env->pc_w =ldl_p (mem_buf) /2 ; +return 4 ; + } + +return 0 ; +}target/avr/machine.c new file +121
-0@@ -0,0 +1,121 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "migration/cpu.h" + +static int get_sreg (QEMUFile *f,void *opaque,size_t size, +const VMStateField *field) +{ +CPUAVRState *env = opaque; +uint8_t sreg; + + sreg =qemu_get_byte (f); +cpu_set_sreg (env, sreg); +return 0 ; +} + +static int put_sreg ( +QEMUFile *f,void *opaque,size_t size, +const VMStateField *field,QJSON *vmdesc) +{ +CPUAVRState *env = opaque; +uint8_t sreg =cpu_get_sreg (env); + +qemu_put_byte (f, sreg); +return 0 ; +} + +static const VMStateInfo vms_sreg = { + .name ="sreg" , + .get = get_sreg, + .put = put_sreg, +}; + +static int get_segment ( +QEMUFile *f,void *opaque,size_t size,const VMStateField *field) +{ +uint32_t *ramp = opaque; +uint8_t temp; + + temp =qemu_get_byte (f); + *ramp = ((uint32_t )temp) <<16 ; +return 0 ; +} + +static int put_segment ( +QEMUFile *f,void *opaque,size_t size, +const VMStateField *field,QJSON *vmdesc) +{ +uint32_t *ramp = opaque; +uint8_t temp = *ramp >>16 ; + +qemu_put_byte (f, temp); +return 0 ; +} + +static const VMStateInfo vms_rampD = { + .name ="rampD" , + .get = get_segment, + .put = put_segment, +}; +static const VMStateInfo vms_rampX = { + .name ="rampX" , + .get = get_segment, + .put = put_segment, +}; +static const VMStateInfo vms_rampY = { + .name ="rampY" , + .get = get_segment, + .put = put_segment, +}; +static const VMStateInfo vms_rampZ = { + .name ="rampZ" , + .get = get_segment, + .put = put_segment, +}; +static const VMStateInfo vms_eind = { + .name ="eind" , + .get = get_segment, + .put = put_segment, +}; + +const VMStateDescription vms_avr_cpu = { + .name ="cpu" , + .version_id =0 , + .minimum_version_id =0 , + .fields = (VMStateField []) { +VMSTATE_UINT32 (env.pc_w,AVRCPU ), +VMSTATE_UINT32 (env.sp,AVRCPU ), +VMSTATE_UINT32 (env.skip,AVRCPU ), + +VMSTATE_UINT32_ARRAY (env.r,AVRCPU ,NUMBER_OF_CPU_REGISTERS ), + +VMSTATE_SINGLE (env,AVRCPU ,0 , vms_sreg, CPUAVRState), +VMSTATE_SINGLE (env.rampD,AVRCPU ,0 , vms_rampD, uint32_t), +VMSTATE_SINGLE (env.rampX,AVRCPU ,0 , vms_rampX, uint32_t), +VMSTATE_SINGLE (env.rampY,AVRCPU ,0 , vms_rampY, uint32_t), +VMSTATE_SINGLE (env.rampZ,AVRCPU ,0 , vms_rampZ, uint32_t), +VMSTATE_SINGLE (env.eind,AVRCPU ,0 , vms_eind, uint32_t), + +VMSTATE_END_OF_LIST () + } +};gdb-xml/avr-cpu.xml new file +49
-1@@ -0,0 +1,49 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!-- Register numbers are hard-coded in order to maintain backward + compatibility with older versions of tools that didn't use xml + register descriptions. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<feature name="org.gnu.gdb.riscv.cpu"> + <reg name="r0" bitsize="8" type="int" regnum="0"/> + <reg name="r1" bitsize="8" type="int"/> + <reg name="r2" bitsize="8" type="int"/> + <reg name="r3" bitsize="8" type="int"/> + <reg name="r4" bitsize="8" type="int"/> + <reg name="r5" bitsize="8" type="int"/> + <reg name="r6" bitsize="8" type="int"/> + <reg name="r7" bitsize="8" type="int"/> + <reg name="r8" bitsize="8" type="int"/> + <reg name="r9" bitsize="8" type="int"/> + <reg name="r10" bitsize="8" type="int"/> + <reg name="r11" bitsize="8" type="int"/> + <reg name="r12" bitsize="8" type="int"/> + <reg name="r13" bitsize="8" type="int"/> + <reg name="r14" bitsize="8" type="int"/> + <reg name="r15" bitsize="8" type="int"/> + <reg name="r16" bitsize="8" type="int"/> + <reg name="r17" bitsize="8" type="int"/> + <reg name="r18" bitsize="8" type="int"/> + <reg name="r19" bitsize="8" type="int"/> + <reg name="r20" bitsize="8" type="int"/> + <reg name="r21" bitsize="8" type="int"/> + <reg name="r22" bitsize="8" type="int"/> + <reg name="r23" bitsize="8" type="int"/> + <reg name="r24" bitsize="8" type="int"/> + <reg name="r25" bitsize="8" type="int"/> + <reg name="r26" bitsize="8" type="int"/> + <reg name="r27" bitsize="8" type="int"/> + <reg name="r28" bitsize="8" type="int"/> + <reg name="r29" bitsize="8" type="int"/> + <reg name="r30" bitsize="8" type="int"/> + <reg name="r31" bitsize="8" type="int"/> + <reg name="sreg" bitsize="8" type="int"/> + <reg name="sp" bitsize="8" type="int"/> + <reg name="pc" bitsize="8" type="int"/> +</feature> --2.17.2 (Apple Git-113)
PATCH v39 2/22 target/avr: Add instruction helpers
In reply to Michael RolnikStubs for unimplemented instructions and helpers for instructions that need to interact with QEMU. SPM and WDR are unimplemented because they require emulation of complex peripherals.
The implementation of SLEEP is very limited due to the lack of peripherals to generate wake interrupts. Memory access instructions are implemented here because some address ranges actually refer to CPU registers.
--- target/avr/helper.h | 29 ++++ target/avr/helper.c | 347 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 376 insertions(+) create mode 100644 target/avr/helper.h create mode 100644 target/avr/helper.c
target/avr/helper.h new file +29 -0
@@ -0,0 +1,29 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +DEF_HELPER_1(wdr, void, env) +DEF_HELPER_1(debug, void, env) +DEF_HELPER_1(break, void, env) +DEF_HELPER_1(sleep, void, env) +DEF_HELPER_1(unsupported, void, env) +DEF_HELPER_3(outb, void, env, i32, i32) +DEF_HELPER_2(inb, tl, env, i32) +DEF_HELPER_3(fullwr, void, env, i32, i32) +DEF_HELPER_2 (fullrd, tl, env, i32)
target/avr/helper.c new file +347 -0
347 lines not on this page · raw message
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 3/22 target/avr: Add instruction decoding
In reply to Michael RolnikThis includes:
- encoding of all 16 bit instructions
- encoding of all 32 bit instructions
--- target/avr/insn.decode | 183 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 183 insertions(+) create mode 100644 target/avr/insn.decode
target/avr/insn.decode new file +183 -0
@@ -0,0 +1,183 @@ +# +# AVR instruction decode definitions. +# +# Copyright (c) 2019 Michael Rolnik <[email protected]> +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>. +# + +# +# regs_16_31_by_one = [16 .. 31] +# regs_16_23_by_one = [16 .. 23] +# regs_24_30_by_two = [24, 26, 28, 30] +# regs_00_30_by_two = [0, 2, 4, 6, 8, .. 30] + +%rd 4:5 +%rr 9:1 0:4 + +%rd_a 4:4 !function=to_regs_16_31_by_one +%rd_b 4:3 !function=to_regs_16_23_by_one +%rd_c 4:2 !function=to_regs_24_30_by_two +%rd_d 4:4 !function=to_regs_00_30_by_two +%rr_a 0:4 !function=to_regs_16_31_by_one +%rr_b 0:3 !function=to_regs_16_23_by_one +%rr_d 0:4 !function=to_regs_00_30_by_two + +%imm6 6:2 0:4 +%imm8 8:4 0:4 + +%io_imm 9:2 0:4 +%ldst_d_imm 13:1 10:2 0:3 + +# The 22-bit immediate is partially in the opcode word, +# and partially in the next. Use append_16 to build the +# complete 22-bit value. +%imm_call 4:5 0:1 !function=append_16 + + +&rd_rr rd rr +&rd_imm rd imm + +@op_rd_rr .... .. . ..... .... &rd_rr rd=%rd rr=%rr +@op_rd_imm6 .... .... .. .. .... &rd_imm rd=%rd_c imm=%imm6 +@op_rd_imm8 .... .... .... .... &rd_imm rd=%rd_a imm=%imm8 +@op_bit .... .... . bit:3 .... +@op_bit_imm .... .. imm:s7 bit:3 +@fmul .... .... . ... . ... &rd_rr rd=%rd_b rr=%rr_b +@io_rd_imm .... . .. ..... .... &rd_imm rd=%rd imm=%io_imm +@ldst_d .. . . .. . rd:5 . ... &rd_imm imm=%ldst_d_imm + +# The 16-bit immediate is completely in the next word. +# Fields cannot be defined with no bits, so we cannot play +# the same trick and append to a zero-bit value. +# Defer reading the immediate until trans_{LDS,STS}. +@ldst_s .... ... rd:5 .... imm=0 + +# +# Arithmetic Instructions +# +ADD 0000 11 . ..... .... @op_rd_rr +ADC 0001 11 . ..... .... @op_rd_rr +ADIW 1001 0110 .. .. .... @op_rd_imm6 +SUB 0001 10 . ..... .... @op_rd_rr +SUBI 0101 .... .... .... @op_rd_imm8 +SBC 0000 10 . ..... .... @op_rd_rr +SBCI 0100 .... .... .... @op_rd_imm8 +SBIW 1001 0111 .. .. .... @op_rd_imm6 +AND 0010 00 . ..... .... @op_rd_rr +ANDI 0111 .... .... .... @op_rd_imm8 +OR 0010 10 . ..... .... @op_rd_rr +ORI 0110 .... .... .... @op_rd_imm8 +EOR 0010 01 . ..... .... @op_rd_rr +COM 1001 010 rd:5 0000 +NEG 1001 010 rd:5 0001 +INC 1001 010 rd:5 0011 +DEC 1001 010 rd:5 1010 +MUL 1001 11 . ..... .... @op_rd_rr +MULS 0000 0010 .... .... &rd_rr rd=%rd_a rr=%rr_a +MULSU 0000 0011 0 ... 0 ... @fmul +FMUL 0000 0011 0 ... 1 ... @fmul +FMULS 0000 0011 1 ... 0 ... @fmul +FMULSU 0000 0011 1 ... 1 ... @fmul +DES 1001 0100 imm:4 1011 + +# +# Branch Instructions +# +RJMP 1100 imm:s12 +IJMP 1001 0100 0000 1001 +EIJMP 1001 0100 0001 1001 +JMP 1001 010 ..... 110 . imm=%imm_call +RCALL 1101 imm:s12 +ICALL 1001 0101 0000 1001 +EICALL 1001 0101 0001 1001 +CALL 1001 010 ..... 111 . imm=%imm_call +RET 1001 0101 0000 1000 +RETI 1001 0101 0001 1000 +CPSE 0001 00 . ..... .... @op_rd_rr +CP 0001 01 . ..... .... @op_rd_rr +CPC 0000 01 . ..... .... @op_rd_rr +CPI 0011 .... .... .... @op_rd_imm8 +SBRC 1111 110 rr:5 0 bit:3 +SBRS 1111 111 rr:5 0 bit:3 +SBIC 1001 1001 reg:5 bit:3 +SBIS 1001 1011 reg:5 bit:3 +BRBS 1111 00 ....... ... @op_bit_imm +BRBC 1111 01 ....... ... @op_bit_imm + +# +# Data Transfer Instructions +# +MOV 0010 11 . ..... .... @op_rd_rr +MOVW 0000 0001 .... .... &rd_rr rd=%rd_d rr=%rr_d +LDI 1110 .... .... .... @op_rd_imm8 +LDS 1001 000 ..... 0000 @ldst_s +LDX1 1001 000 rd:5 1100 +LDX2 1001 000 rd:5 1101 +LDX3 1001 000 rd:5 1110 +LDY2 1001 000 rd:5 1001 +LDY3 1001 000 rd:5 1010 +LDZ2 1001 000 rd:5 0001 +LDZ3 1001 000 rd:5 0010 +LDDY 10 . 0 .. 0 ..... 1 ... @ldst_d +LDDZ 10 . 0 .. 0 ..... 0 ... @ldst_d +STS 1001 001 ..... 0000 @ldst_s +STX1 1001 001 rr:5 1100 +STX2 1001 001 rr:5 1101 +STX3 1001 001 rr:5 1110 +STY2 1001 001 rd:5 1001 +STY3 1001 001 rd:5 1010 +STZ2 1001 001 rd:5 0001 +STZ3 1001 001 rd:5 0010 +STDY 10 . 0 .. 1 ..... 1 ... @ldst_d +STDZ 10 . 0 .. 1 ..... 0 ... @ldst_d +LPM1 1001 0101 1100 1000 +LPM2 1001 000 rd:5 0100 +LPMX 1001 000 rd:5 0101 +ELPM1 1001 0101 1101 1000 +ELPM2 1001 000 rd:5 0110 +ELPMX 1001 000 rd:5 0111 +SPM 1001 0101 1110 1000 +SPMX 1001 0101 1111 1000 +IN 1011 0 .. ..... .... @io_rd_imm +OUT 1011 1 .. ..... .... @io_rd_imm +PUSH 1001 001 rd:5 1111 +POP 1001 000 rd:5 1111 +XCH 1001 001 rd:5 0100 +LAC 1001 001 rd:5 0110 +LAS 1001 001 rd:5 0101 +LAT 1001 001 rd:5 0111 + +# +# Bit and Bit-test Instructions +# +LSR 1001 010 rd:5 0110 +ROR 1001 010 rd:5 0111 +ASR 1001 010 rd:5 0101 +SWAP 1001 010 rd:5 0010 +SBI 1001 1010 reg:5 bit:3 +CBI 1001 1000 reg:5 bit:3 +BST 1111 101 rd:5 0 bit:3 +BLD 1111 100 rd:5 0 bit:3 +BSET 1001 0100 0 bit:3 1000 +BCLR 1001 0100 1 bit:3 1000 + +# +# MCU Control Instructions +# +BREAK 1001 0101 1001 1000 +NOP 0000 0000 0000 0000 +SLEEP 1001 0101 1000 1000 +WDR 1001 0101 1010 1000 +
Signature · 1 line
2.17.2 (Apple Git-113)
Re: [PATCH v39 03/22] target/avr: Add instruction decoding
Quoted 7 lines · Michael Rolnik
This includes:
- encoding of all 16 bit instructions
- encoding of all 32 bit instructionsSigned-off-by Michael Rolnik <[email protected]>---
Michael,
I am very pleased that you rearranged the order to be in sync with the documentation.
Now, for the next version, I would ask you to make this patch disappear.
More precisely, "MCU Control Instructions" section of insn.decode file move to be a part of "Add MCU Control Instructions" (not sure abiut the title, but it is 6 or 7 patches after this one) patch, and so on, in the same fashion, for all groups of instructions.
Kind regards,
Aleksandar
target/avr/insn.decode | 183 +++++++++++++++++++++++++++++++++++++++++
Quoted 197 lines
1 file changed, 183 insertions(+) create mode 100644 target/avr/insn.decodetarget/avr/insn.decode new file +17
-0@@ -0,0 +1,183 @@ +# +# AVR instruction decode definitions. +# +# Copyright (c) 2019 Michael Rolnik <[email protected]> +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>.
target/avr/insn.decode new file +166
-1+# + +# +# regs_16_31_by_one = [16 .. 31] +# regs_16_23_by_one = [16 .. 23] +# regs_24_30_by_two = [24, 26, 28, 30] +# regs_00_30_by_two = [0, 2, 4, 6, 8, .. 30] + +%rd 4:5 +%rr 9:1 0:4 + +%rd_a 4:4 !function=to_regs_16_31_by_one +%rd_b 4:3 !function=to_regs_16_23_by_one +%rd_c 4:2 !function=to_regs_24_30_by_two +%rd_d 4:4 !function=to_regs_00_30_by_two +%rr_a 0:4 !function=to_regs_16_31_by_one +%rr_b 0:3 !function=to_regs_16_23_by_one +%rr_d 0:4 !function=to_regs_00_30_by_two + +%imm6 6:2 0:4 +%imm8 8:4 0:4 + +%io_imm 9:2 0:4 +%ldst_d_imm 13:1 10:2 0:3 + +# The 22-bit immediate is partially in the opcode word, +# and partially in the next. Use append_16 to build the +# complete 22-bit value. +%imm_call 4:5 0:1 !function=append_16 + + +&rd_rr rd rr +&rd_imm rd imm + +@op_rd_rr .... .. . ..... .... &rd_rr rd=%rd rr=%rr +@op_rd_imm6 .... .... .. .. .... &rd_imm rd=%rd_c imm=%imm6 +@op_rd_imm8 .... .... .... .... &rd_imm rd=%rd_a imm=%imm8 +@op_bit .... .... . bit:3 .... +@op_bit_imm .... .. imm:s7 bit:3 +@fmul .... .... . ... . ... &rd_rr rd=%rd_b rr=%rr_b +@io_rd_imm .... . .. ..... .... &rd_imm rd=%rd imm=%io_imm +@ldst_d .. . . .. . rd:5 . ... &rd_imm imm=%ldst_d_imm + +# The 16-bit immediate is completely in the next word. +# Fields cannot be defined with no bits, so we cannot play +# the same trick and append to a zero-bit value. +# Defer reading the immediate until trans_{LDS,STS}. +@ldst_s .... ... rd:5 .... imm=0 + +# +# Arithmetic Instructions +# +ADD 0000 11 . ..... .... @op_rd_rr +ADC 0001 11 . ..... .... @op_rd_rr +ADIW 1001 0110 .. .. .... @op_rd_imm6 +SUB 0001 10 . ..... .... @op_rd_rr +SUBI 0101 .... .... .... @op_rd_imm8 +SBC 0000 10 . ..... .... @op_rd_rr +SBCI 0100 .... .... .... @op_rd_imm8 +SBIW 1001 0111 .. .. .... @op_rd_imm6 +AND 0010 00 . ..... .... @op_rd_rr +ANDI 0111 .... .... .... @op_rd_imm8 +OR 0010 10 . ..... .... @op_rd_rr +ORI 0110 .... .... .... @op_rd_imm8 +EOR 0010 01 . ..... .... @op_rd_rr +COM 1001 010 rd:5 0000 +NEG 1001 010 rd:5 0001 +INC 1001 010 rd:5 0011 +DEC 1001 010 rd:5 1010 +MUL 1001 11 . ..... .... @op_rd_rr +MULS 0000 0010 .... .... &rd_rr rd=%rd_a rr=%rr_a +MULSU 0000 0011 0 ... 0 ... @fmul +FMUL 0000 0011 0 ... 1 ... @fmul +FMULS 0000 0011 1 ... 0 ... @fmul +FMULSU 0000 0011 1 ... 1 ... @fmul +DES 1001 0100 imm:4 1011 + +# +# Branch Instructions +# +RJMP 1100 imm:s12 +IJMP 1001 0100 0000 1001 +EIJMP 1001 0100 0001 1001 +JMP 1001 010 ..... 110 . imm=%imm_call +RCALL 1101 imm:s12 +ICALL 1001 0101 0000 1001 +EICALL 1001 0101 0001 1001 +CALL 1001 010 ..... 111 . imm=%imm_call +RET 1001 0101 0000 1000 +RETI 1001 0101 0001 1000 +CPSE 0001 00 . ..... .... @op_rd_rr +CP 0001 01 . ..... .... @op_rd_rr +CPC 0000 01 . ..... .... @op_rd_rr +CPI 0011 .... .... .... @op_rd_imm8 +SBRC 1111 110 rr:5 0 bit:3 +SBRS 1111 111 rr:5 0 bit:3 +SBIC 1001 1001 reg:5 bit:3 +SBIS 1001 1011 reg:5 bit:3 +BRBS 1111 00 ....... ... @op_bit_imm +BRBC 1111 01 ....... ... @op_bit_imm + +# +# Data Transfer Instructions +# +MOV 0010 11 . ..... .... @op_rd_rr +MOVW 0000 0001 .... .... &rd_rr rd=%rd_d rr=%rr_d +LDI 1110 .... .... .... @op_rd_imm8 +LDS 1001 000 ..... 0000 @ldst_s +LDX1 1001 000 rd:5 1100 +LDX2 1001 000 rd:5 1101 +LDX3 1001 000 rd:5 1110 +LDY2 1001 000 rd:5 1001 +LDY3 1001 000 rd:5 1010 +LDZ2 1001 000 rd:5 0001 +LDZ3 1001 000 rd:5 0010 +LDDY 10 . 0 .. 0 ..... 1 ... @ldst_d +LDDZ 10 . 0 .. 0 ..... 0 ... @ldst_d +STS 1001 001 ..... 0000 @ldst_s +STX1 1001 001 rr:5 1100 +STX2 1001 001 rr:5 1101 +STX3 1001 001 rr:5 1110 +STY2 1001 001 rd:5 1001 +STY3 1001 001 rd:5 1010 +STZ2 1001 001 rd:5 0001 +STZ3 1001 001 rd:5 0010 +STDY 10 . 0 .. 1 ..... 1 ... @ldst_d +STDZ 10 . 0 .. 1 ..... 0 ... @ldst_d +LPM1 1001 0101 1100 1000 +LPM2 1001 000 rd:5 0100 +LPMX 1001 000 rd:5 0101 +ELPM1 1001 0101 1101 1000 +ELPM2 1001 000 rd:5 0110 +ELPMX 1001 000 rd:5 0111 +SPM 1001 0101 1110 1000 +SPMX 1001 0101 1111 1000 +IN 1011 0 .. ..... .... @io_rd_imm +OUT 1011 1 .. ..... .... @io_rd_imm +PUSH 1001 001 rd:5 1111 +POP 1001 000 rd:5 1111 +XCH 1001 001 rd:5 0100 +LAC 1001 001 rd:5 0110 +LAS 1001 001 rd:5 0101 +LAT 1001 001 rd:5 0111 + +# +# Bit and Bit-test Instructions +# +LSR 1001 010 rd:5 0110 +ROR 1001 010 rd:5 0111 +ASR 1001 010 rd:5 0101 +SWAP 1001 010 rd:5 0010 +SBI 1001 1010 reg:5 bit:3 +CBI 1001 1000 reg:5 bit:3 +BST 1111 101 rd:5 0 bit:3 +BLD 1111 100 rd:5 0 bit:3 +BSET 1001 0100 0 bit:3 1000 +BCLR 1001 0100 1 bit:3 1000 + +# +# MCU Control Instructions +# +BREAK 1001 0101 1001 1000 +NOP 0000 0000 0000 0000 +SLEEP 1001 0101 1000 1000 +WDR 1001 0101 1010 1000 + --2.17.2 (Apple Git-113)
Re: [PATCH v39 03/22] target/avr: Add instruction decoding
Hi Aleksandar.
please explain.
Quoted 239 lines · Aleksandar Markovic
Quoted 7 lines · Michael Rolnik
This includes:
- encoding of all 16 bit instructions
- encoding of all 32 bit instructionsSigned-off-by Michael Rolnik <[email protected]>---
Michael,
I am very pleased that you rearranged the order to be in sync with the documentation.
Now, for the next version, I would ask you to make this patch disappear.
More precisely, "MCU Control Instructions" section of insn.decode file move to be a part of "Add MCU Control Instructions" (not sure abiut the title, but it is 6 or 7 patches after this one) patch, and so on, in the same fashion, for all groups of instructions.
Kind regards,
Aleksandar
target/avr/insn.decode | 183 +++++++++++++++++++++++++++++++++++++++++Quoted 207 lines
1 file changed, 183 insertions(+) create mode 100644 target/avr/insn.decodetarget/avr/insn.decode new file +17
-0@@ -0,0 +1,183 @@ +# +# AVR instruction decode definitions. +# +# Copyright (c) 2019 Michael Rolnik <[email protected]> +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>.
target/avr/insn.decode new file +36
-0+# + +# +# regs_16_31_by_one = [16 .. 31] +# regs_16_23_by_one = [16 .. 23] +# regs_24_30_by_two = [24, 26, 28, 30] +# regs_00_30_by_two = [0, 2, 4, 6, 8, .. 30] + +%rd 4:5 +%rr 9:1 0:4 + +%rd_a 4:4 !function=to_regs_16_31_by_one +%rd_b 4:3 !function=to_regs_16_23_by_one +%rd_c 4:2 !function=to_regs_24_30_by_two +%rd_d 4:4 !function=to_regs_00_30_by_two +%rr_a 0:4 !function=to_regs_16_31_by_one +%rr_b 0:3 !function=to_regs_16_23_by_one +%rr_d 0:4 !function=to_regs_00_30_by_two + +%imm6 6:2 0:4 +%imm8 8:4 0:4 + +%io_imm 9:2 0:4 +%ldst_d_imm 13:1 10:2 0:3 + +# The 22-bit immediate is partially in the opcode word, +# and partially in the next. Use append_16 to build the +# complete 22-bit value. +%imm_call 4:5 0:1 !function=append_16 + + +&rd_rr rd rr +&rd_imm rd imm + +@op_rd_rr .... .. . ..... .... &rd_rr rd=%rd rr=%rr +@op_rd_imm6 .... .... .. .. .... &rd_imm rd=%rd_cimm=%imm6
+@op_rd_imm8 .... .... .... ....&rd_immrd=%rd_a
imm=%imm8+@op_bit .... .... . bit:3 .... +@op_bit_imm .... .. imm:s7 bit:3 +@fmul .... .... . ... . ... &rd_rr rd=%rd_b rr=%rr_b +@io_rd_imm .... . .. ..... .... &rd_imm rd=%rdimm=%io_imm
+@ldst_d .. . . .. . rd:5 . ...&rd_immimm=%ldst_d_immtarget/avr/insn.decode new file +124
-1+ +# The 16-bit immediate is completely in the next word. +# Fields cannot be defined with no bits, so we cannot play +# the same trick and append to a zero-bit value. +# Defer reading the immediate until trans_{LDS,STS}. +@ldst_s .... ... rd:5 .... imm=0 + +# +# Arithmetic Instructions +# +ADD 0000 11 . ..... .... @op_rd_rr +ADC 0001 11 . ..... .... @op_rd_rr +ADIW 1001 0110 .. .. .... @op_rd_imm6 +SUB 0001 10 . ..... .... @op_rd_rr +SUBI 0101 .... .... .... @op_rd_imm8 +SBC 0000 10 . ..... .... @op_rd_rr +SBCI 0100 .... .... .... @op_rd_imm8 +SBIW 1001 0111 .. .. .... @op_rd_imm6 +AND 0010 00 . ..... .... @op_rd_rr +ANDI 0111 .... .... .... @op_rd_imm8 +OR 0010 10 . ..... .... @op_rd_rr +ORI 0110 .... .... .... @op_rd_imm8 +EOR 0010 01 . ..... .... @op_rd_rr +COM 1001 010 rd:5 0000 +NEG 1001 010 rd:5 0001 +INC 1001 010 rd:5 0011 +DEC 1001 010 rd:5 1010 +MUL 1001 11 . ..... .... @op_rd_rr +MULS 0000 0010 .... .... &rd_rr rd=%rd_a rr=%rr_a +MULSU 0000 0011 0 ... 0 ... @fmul +FMUL 0000 0011 0 ... 1 ... @fmul +FMULS 0000 0011 1 ... 0 ... @fmul +FMULSU 0000 0011 1 ... 1 ... @fmul +DES 1001 0100 imm:4 1011 + +# +# Branch Instructions +# +RJMP 1100 imm:s12 +IJMP 1001 0100 0000 1001 +EIJMP 1001 0100 0001 1001 +JMP 1001 010 ..... 110 . imm=%imm_call +RCALL 1101 imm:s12 +ICALL 1001 0101 0000 1001 +EICALL 1001 0101 0001 1001 +CALL 1001 010 ..... 111 . imm=%imm_call +RET 1001 0101 0000 1000 +RETI 1001 0101 0001 1000 +CPSE 0001 00 . ..... .... @op_rd_rr +CP 0001 01 . ..... .... @op_rd_rr +CPC 0000 01 . ..... .... @op_rd_rr +CPI 0011 .... .... .... @op_rd_imm8 +SBRC 1111 110 rr:5 0 bit:3 +SBRS 1111 111 rr:5 0 bit:3 +SBIC 1001 1001 reg:5 bit:3 +SBIS 1001 1011 reg:5 bit:3 +BRBS 1111 00 ....... ... @op_bit_imm +BRBC 1111 01 ....... ... @op_bit_imm + +# +# Data Transfer Instructions +# +MOV 0010 11 . ..... .... @op_rd_rr +MOVW 0000 0001 .... .... &rd_rr rd=%rd_d rr=%rr_d +LDI 1110 .... .... .... @op_rd_imm8 +LDS 1001 000 ..... 0000 @ldst_s +LDX1 1001 000 rd:5 1100 +LDX2 1001 000 rd:5 1101 +LDX3 1001 000 rd:5 1110 +LDY2 1001 000 rd:5 1001 +LDY3 1001 000 rd:5 1010 +LDZ2 1001 000 rd:5 0001 +LDZ3 1001 000 rd:5 0010 +LDDY 10 . 0 .. 0 ..... 1 ... @ldst_d +LDDZ 10 . 0 .. 0 ..... 0 ... @ldst_d +STS 1001 001 ..... 0000 @ldst_s +STX1 1001 001 rr:5 1100 +STX2 1001 001 rr:5 1101 +STX3 1001 001 rr:5 1110 +STY2 1001 001 rd:5 1001 +STY3 1001 001 rd:5 1010 +STZ2 1001 001 rd:5 0001 +STZ3 1001 001 rd:5 0010 +STDY 10 . 0 .. 1 ..... 1 ... @ldst_d +STDZ 10 . 0 .. 1 ..... 0 ... @ldst_d +LPM1 1001 0101 1100 1000 +LPM2 1001 000 rd:5 0100 +LPMX 1001 000 rd:5 0101 +ELPM1 1001 0101 1101 1000 +ELPM2 1001 000 rd:5 0110 +ELPMX 1001 000 rd:5 0111 +SPM 1001 0101 1110 1000 +SPMX 1001 0101 1111 1000 +IN 1011 0 .. ..... .... @io_rd_imm +OUT 1011 1 .. ..... .... @io_rd_imm +PUSH 1001 001 rd:5 1111 +POP 1001 000 rd:5 1111 +XCH 1001 001 rd:5 0100 +LAC 1001 001 rd:5 0110 +LAS 1001 001 rd:5 0101 +LAT 1001 001 rd:5 0111 + +# +# Bit and Bit-test Instructions +# +LSR 1001 010 rd:5 0110 +ROR 1001 010 rd:5 0111 +ASR 1001 010 rd:5 0101 +SWAP 1001 010 rd:5 0010 +SBI 1001 1010 reg:5 bit:3 +CBI 1001 1000 reg:5 bit:3 +BST 1111 101 rd:5 0 bit:3 +BLD 1111 100 rd:5 0 bit:3 +BSET 1001 0100 0 bit:3 1000 +BCLR 1001 0100 1 bit:3 1000 + +# +# MCU Control Instructions +# +BREAK 1001 0101 1001 1000 +NOP 0000 0000 0000 0000 +SLEEP 1001 0101 1000 1000 +WDR 1001 0101 1010 1000 + --2.17.2 (Apple Git-113)
Signature · 2 lines
Best Regards, Michael Rolnik
Re: [PATCH v39 03/22] target/avr: Add instruction decoding
Quoted 6 lines · Michael Rolnik
Hi Aleksandar.
please explain.
Quoted 2 lines
Hi, Michael.
I wanted to say:
1. Cut the parts of insn.decode that describe coding of arithmetic and logic instructions and include them in the patch:
target/avr: Add instruction translation - Arithmetic and Logic Instructions
2. Cut the parts of insn.decode that describe coding of branch instructions and include them in the patch:
target/avr: Add instruction translation - Branch Instructions
3. Cut the parts of insn.decode that describe coding of data transfer instructions
and include them in the patch:
target/avr: Add instruction translation - Data Transfer Instructions
4. Cut the parts of insn.decode that describe coding of bit and bit-test instructions and include them in the patch:
target/avr: Add instruction translation - Bit and Bit-test Instructions
5. Cut the parts of insn.decode that describe coding of MCU control instructions
and include them in the patch:
target/avr: Add instruction translation - MCU Control Instructions
This way, your patches become logicaly-organized rather than file organized. The patch on, let's say, arithmetic and logic instructions will contain all elements needed for their implementation, rather than those elements being split between decode and omplementation parts .
Regards,
Aleksandar
Quoted 251 lines
Quoted 235 lines · Aleksandar Markovic
Quoted 7 lines · Michael Rolnik
This includes:
- encoding of all 16 bit instructions
- encoding of all 32 bit instructionsSigned-off-by Michael Rolnik <[email protected]>---
Michael,
I am very pleased that you rearranged the order to be in sync with the documentation.
Now, for the next version, I would ask you to make this patch disappear.
More precisely, "MCU Control Instructions" section of insn.decode file move to be a part of "Add MCU Control Instructions" (not sure abiut the title, but it is 6 or 7 patches after this one) patch, and so on, in the same fashion, for all groups of instructions.
Kind regards,
Aleksandar
target/avr/insn.decode | 183 +++++++++++++++++++++++++++++++++++++++++Quoted 202 lines
1 file changed, 183 insertions(+) create mode 100644 target/avr/insn.decodetarget/avr/insn.decode new file +17
-0@@ -0,0 +1,183 @@ +# +# AVR instruction decode definitions. +# +# Copyright (c) 2019 Michael Rolnik <[email protected]> +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>.
target/avr/insn.decode new file +12
-0+# + +# +# regs_16_31_by_one = [16 .. 31] +# regs_16_23_by_one = [16 .. 23] +# regs_24_30_by_two = [24, 26, 28, 30] +# regs_00_30_by_two = [0, 2, 4, 6, 8, .. 30] + +%rd 4:5 +%rr 9:1 0:4 + +%rd_a 4:4 !function=to_regs_16_31_by_one
+%rd_b 4:3 !function=to_regs_16_23_by_
one
+%rd_c 4:2 !function=to_regs_24_30_by_
two
+%rd_d 4:4 !function=to_regs_00_30_by_
two
+%rr_a 0:4 !function=to_regs_16_31_by_
one
+%rr_b 0:3 !function=to_regs_16_23_by_
one
+%rr_d 0:4 !function=to_regs_00_30_by_
twotarget/avr/insn.decode new file +18
-0+ +%imm6 6:2 0:4 +%imm8 8:4 0:4 + +%io_imm 9:2 0:4 +%ldst_d_imm 13:1 10:2 0:3 + +# The 22-bit immediate is partially in the opcode word, +# and partially in the next. Use append_16 to build the +# complete 22-bit value. +%imm_call 4:5 0:1 !function=append_16 + + +&rd_rr rd rr +&rd_imm rd imm + +@op_rd_rr .... .. . ..... .... &rd_rr rd=%rd rr=%rr +@op_rd_imm6 .... .... .. .. .... &rd_imm rd=%rd_cimm=%imm6
+@op_rd_imm8 .... .... .... ....&rd_immrd=%rd_a
imm=%imm8+@op_bit .... .... . bit:3 .... +@op_bit_imm .... .. imm:s7 bit:3 +@fmul .... .... . ... . ... &rd_rr rd=%rd_brr=%rr_b
+@io_rd_imm .... . .. ..... ....&rd_immrd=%rd
imm=%io_imm
+@ldst_d .. . . .. . rd:5 . ...&rd_immimm=%ldst_d_immtarget/avr/insn.decode new file +29
-0+ +# The 16-bit immediate is completely in the next word. +# Fields cannot be defined with no bits, so we cannot play +# the same trick and append to a zero-bit value. +# Defer reading the immediate until trans_{LDS,STS}. +@ldst_s .... ... rd:5 .... imm=0 + +# +# Arithmetic Instructions +# +ADD 0000 11 . ..... .... @op_rd_rr +ADC 0001 11 . ..... .... @op_rd_rr +ADIW 1001 0110 .. .. .... @op_rd_imm6 +SUB 0001 10 . ..... .... @op_rd_rr +SUBI 0101 .... .... .... @op_rd_imm8 +SBC 0000 10 . ..... .... @op_rd_rr +SBCI 0100 .... .... .... @op_rd_imm8 +SBIW 1001 0111 .. .. .... @op_rd_imm6 +AND 0010 00 . ..... .... @op_rd_rr +ANDI 0111 .... .... .... @op_rd_imm8 +OR 0010 10 . ..... .... @op_rd_rr +ORI 0110 .... .... .... @op_rd_imm8 +EOR 0010 01 . ..... .... @op_rd_rr +COM 1001 010 rd:5 0000 +NEG 1001 010 rd:5 0001 +INC 1001 010 rd:5 0011 +DEC 1001 010 rd:5 1010 +MUL 1001 11 . ..... .... @op_rd_rr +MULS 0000 0010 .... .... &rd_rr rd=%rd_arr=%rr_a
target/avr/insn.decode new file +35
-0+MULSU 0000 0011 0 ... 0 ... @fmul +FMUL 0000 0011 0 ... 1 ... @fmul +FMULS 0000 0011 1 ... 0 ... @fmul +FMULSU 0000 0011 1 ... 1 ... @fmul +DES 1001 0100 imm:4 1011 + +# +# Branch Instructions +# +RJMP 1100 imm:s12 +IJMP 1001 0100 0000 1001 +EIJMP 1001 0100 0001 1001 +JMP 1001 010 ..... 110 . imm=%imm_call +RCALL 1101 imm:s12 +ICALL 1001 0101 0000 1001 +EICALL 1001 0101 0001 1001 +CALL 1001 010 ..... 111 . imm=%imm_call +RET 1001 0101 0000 1000 +RETI 1001 0101 0001 1000 +CPSE 0001 00 . ..... .... @op_rd_rr +CP 0001 01 . ..... .... @op_rd_rr +CPC 0000 01 . ..... .... @op_rd_rr +CPI 0011 .... .... .... @op_rd_imm8 +SBRC 1111 110 rr:5 0 bit:3 +SBRS 1111 111 rr:5 0 bit:3 +SBIC 1001 1001 reg:5 bit:3 +SBIS 1001 1011 reg:5 bit:3 +BRBS 1111 00 ....... ... @op_bit_imm +BRBC 1111 01 ....... ... @op_bit_imm + +# +# Data Transfer Instructions +# +MOV 0010 11 . ..... .... @op_rd_rr +MOVW 0000 0001 .... .... &rd_rr rd=%rd_drr=%rr_d
target/avr/insn.decode new file +56
-0+LDI 1110 .... .... .... @op_rd_imm8 +LDS 1001 000 ..... 0000 @ldst_s +LDX1 1001 000 rd:5 1100 +LDX2 1001 000 rd:5 1101 +LDX3 1001 000 rd:5 1110 +LDY2 1001 000 rd:5 1001 +LDY3 1001 000 rd:5 1010 +LDZ2 1001 000 rd:5 0001 +LDZ3 1001 000 rd:5 0010 +LDDY 10 . 0 .. 0 ..... 1 ... @ldst_d +LDDZ 10 . 0 .. 0 ..... 0 ... @ldst_d +STS 1001 001 ..... 0000 @ldst_s +STX1 1001 001 rr:5 1100 +STX2 1001 001 rr:5 1101 +STX3 1001 001 rr:5 1110 +STY2 1001 001 rd:5 1001 +STY3 1001 001 rd:5 1010 +STZ2 1001 001 rd:5 0001 +STZ3 1001 001 rd:5 0010 +STDY 10 . 0 .. 1 ..... 1 ... @ldst_d +STDZ 10 . 0 .. 1 ..... 0 ... @ldst_d +LPM1 1001 0101 1100 1000 +LPM2 1001 000 rd:5 0100 +LPMX 1001 000 rd:5 0101 +ELPM1 1001 0101 1101 1000 +ELPM2 1001 000 rd:5 0110 +ELPMX 1001 000 rd:5 0111 +SPM 1001 0101 1110 1000 +SPMX 1001 0101 1111 1000 +IN 1011 0 .. ..... .... @io_rd_imm +OUT 1011 1 .. ..... .... @io_rd_imm +PUSH 1001 001 rd:5 1111 +POP 1001 000 rd:5 1111 +XCH 1001 001 rd:5 0100 +LAC 1001 001 rd:5 0110 +LAS 1001 001 rd:5 0101 +LAT 1001 001 rd:5 0111 + +# +# Bit and Bit-test Instructions +# +LSR 1001 010 rd:5 0110 +ROR 1001 010 rd:5 0111 +ASR 1001 010 rd:5 0101 +SWAP 1001 010 rd:5 0010 +SBI 1001 1010 reg:5 bit:3 +CBI 1001 1000 reg:5 bit:3 +BST 1111 101 rd:5 0 bit:3 +BLD 1111 100 rd:5 0 bit:3 +BSET 1001 0100 0 bit:3 1000 +BCLR 1001 0100 1 bit:3 1000 + +# +# MCU Control Instructions +# +BREAK 1001 0101 1001 1000Quoted 8 lines
Quoted 8 lines
target/avr/insn.decode new file +4
-1+NOP 0000 0000 0000 0000 +SLEEP 1001 0101 1000 1000 +WDR 1001 0101 1010 1000 + --2.17.2 (Apple Git-113)
--
Best Regards,
Michael Rolnik
Re: [PATCH v39 03/22] target/avr: Add instruction decoding
Quoted 15 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik
Hi Aleksandar.
please explain.
Quoted 2 lines
Hi, Michael.
I wanted to say:
Quoted 7 lines
1. Cut the parts of insn.decode that describe coding of arithmetic and logic instructions and include them in the patch:
target/avr: Add instruction translation - Arithmetic and Logic Instructions
Since that would be the first time insn.decode is mentioned in the new
organization of the series, the license preamble of insn.decode can be included in that patch, of course.
Best wishes,
Aleksandar
Quoted 287 lines
2. Cut the parts of insn.decode that describe coding of branch instructions and include them in the patch:
target/avr: Add instruction translation - Branch Instructions
3. Cut the parts of insn.decode that describe coding of data transfer instructions and include them in the patch:
target/avr: Add instruction translation - Data Transfer Instructions
4. Cut the parts of insn.decode that describe coding of bit and bit-test instructions and include them in the patch:
target/avr: Add instruction translation - Bit and Bit-test Instructions
5. Cut the parts of insn.decode that describe coding of MCU control instructions and include them in the patch:
target/avr: Add instruction translation - MCU Control Instructions
This way, your patches become logicaly-organized rather than file organized. The patch on, let's say, arithmetic and logic instructions will contain all elements needed for their implementation, rather than those elements being split between decode and omplementation parts .
Regards,
Aleksandar
Quoted 251 lines
Quoted 235 lines · Aleksandar Markovic
Quoted 7 lines · Michael Rolnik
This includes:
- encoding of all 16 bit instructions
- encoding of all 32 bit instructionsSigned-off-by Michael Rolnik <[email protected]>---
Michael,
I am very pleased that you rearranged the order to be in sync with the documentation.
Now, for the next version, I would ask you to make this patch disappear.
More precisely, "MCU Control Instructions" section of insn.decode file move to be a part of "Add MCU Control Instructions" (not sure abiut the title, but it is 6 or 7 patches after this one) patch, and so on, in the same fashion, for all groups of instructions.
Kind regards,
Aleksandar
target/avr/insn.decode | 183 +++++++++++++++++++++++++++++++++++++++++Quoted 202 lines
1 file changed, 183 insertions(+) create mode 100644 target/avr/insn.decodetarget/avr/insn.decode new file +17
-0@@ -0,0 +1,183 @@ +# +# AVR instruction decode definitions. +# +# Copyright (c) 2019 Michael Rolnik <[email protected]> +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>.
target/avr/insn.decode new file +36
-0+# + +# +# regs_16_31_by_one = [16 .. 31] +# regs_16_23_by_one = [16 .. 23] +# regs_24_30_by_two = [24, 26, 28, 30] +# regs_00_30_by_two = [0, 2, 4, 6, 8, .. 30] + +%rd 4:5 +%rr 9:1 0:4 + +%rd_a 4:4 !function=to_regs_16_31_by_one +%rd_b 4:3 !function=to_regs_16_23_by_one +%rd_c 4:2 !function=to_regs_24_30_by_two +%rd_d 4:4 !function=to_regs_00_30_by_two +%rr_a 0:4 !function=to_regs_16_31_by_one +%rr_b 0:3 !function=to_regs_16_23_by_one +%rr_d 0:4 !function=to_regs_00_30_by_two + +%imm6 6:2 0:4 +%imm8 8:4 0:4 + +%io_imm 9:2 0:4 +%ldst_d_imm 13:1 10:2 0:3 + +# The 22-bit immediate is partially in the opcode word, +# and partially in the next. Use append_16 to build the +# complete 22-bit value. +%imm_call 4:5 0:1 !function=append_16 + + +&rd_rr rd rr +&rd_imm rd imm + +@op_rd_rr .... .. . ..... .... &rd_rr rd=%rd rr=%rr +@op_rd_imm6 .... .... .. .. .... &rd_imm rd=%rd_cimm=%imm6
+@op_rd_imm8 .... .... .... ....&rd_immrd=%rd_a
imm=%imm8+@op_bit .... .... . bit:3 .... +@op_bit_imm .... .. imm:s7 bit:3 +@fmul .... .... . ... . ... &rd_rr rd=%rd_brr=%rr_b
+@io_rd_imm .... . .. ..... ....&rd_immrd=%rd
imm=%io_imm
+@ldst_d .. . . .. . rd:5 . ...&rd_immimm=%ldst_d_immtarget/avr/insn.decode new file +29
-0+ +# The 16-bit immediate is completely in the next word. +# Fields cannot be defined with no bits, so we cannot play +# the same trick and append to a zero-bit value. +# Defer reading the immediate until trans_{LDS,STS}. +@ldst_s .... ... rd:5 .... imm=0 + +# +# Arithmetic Instructions +# +ADD 0000 11 . ..... .... @op_rd_rr +ADC 0001 11 . ..... .... @op_rd_rr +ADIW 1001 0110 .. .. .... @op_rd_imm6 +SUB 0001 10 . ..... .... @op_rd_rr +SUBI 0101 .... .... .... @op_rd_imm8 +SBC 0000 10 . ..... .... @op_rd_rr +SBCI 0100 .... .... .... @op_rd_imm8 +SBIW 1001 0111 .. .. .... @op_rd_imm6 +AND 0010 00 . ..... .... @op_rd_rr +ANDI 0111 .... .... .... @op_rd_imm8 +OR 0010 10 . ..... .... @op_rd_rr +ORI 0110 .... .... .... @op_rd_imm8 +EOR 0010 01 . ..... .... @op_rd_rr +COM 1001 010 rd:5 0000 +NEG 1001 010 rd:5 0001 +INC 1001 010 rd:5 0011 +DEC 1001 010 rd:5 1010 +MUL 1001 11 . ..... .... @op_rd_rr +MULS 0000 0010 .... .... &rd_rr rd=%rd_arr=%rr_a
target/avr/insn.decode new file +35
-0+MULSU 0000 0011 0 ... 0 ... @fmul +FMUL 0000 0011 0 ... 1 ... @fmul +FMULS 0000 0011 1 ... 0 ... @fmul +FMULSU 0000 0011 1 ... 1 ... @fmul +DES 1001 0100 imm:4 1011 + +# +# Branch Instructions +# +RJMP 1100 imm:s12 +IJMP 1001 0100 0000 1001 +EIJMP 1001 0100 0001 1001 +JMP 1001 010 ..... 110 . imm=%imm_call +RCALL 1101 imm:s12 +ICALL 1001 0101 0000 1001 +EICALL 1001 0101 0001 1001 +CALL 1001 010 ..... 111 . imm=%imm_call +RET 1001 0101 0000 1000 +RETI 1001 0101 0001 1000 +CPSE 0001 00 . ..... .... @op_rd_rr +CP 0001 01 . ..... .... @op_rd_rr +CPC 0000 01 . ..... .... @op_rd_rr +CPI 0011 .... .... .... @op_rd_imm8 +SBRC 1111 110 rr:5 0 bit:3 +SBRS 1111 111 rr:5 0 bit:3 +SBIC 1001 1001 reg:5 bit:3 +SBIS 1001 1011 reg:5 bit:3 +BRBS 1111 00 ....... ... @op_bit_imm +BRBC 1111 01 ....... ... @op_bit_imm + +# +# Data Transfer Instructions +# +MOV 0010 11 . ..... .... @op_rd_rr +MOVW 0000 0001 .... .... &rd_rr rd=%rd_drr=%rr_d
target/avr/insn.decode new file +56
-0+LDI 1110 .... .... .... @op_rd_imm8 +LDS 1001 000 ..... 0000 @ldst_s +LDX1 1001 000 rd:5 1100 +LDX2 1001 000 rd:5 1101 +LDX3 1001 000 rd:5 1110 +LDY2 1001 000 rd:5 1001 +LDY3 1001 000 rd:5 1010 +LDZ2 1001 000 rd:5 0001 +LDZ3 1001 000 rd:5 0010 +LDDY 10 . 0 .. 0 ..... 1 ... @ldst_d +LDDZ 10 . 0 .. 0 ..... 0 ... @ldst_d +STS 1001 001 ..... 0000 @ldst_s +STX1 1001 001 rr:5 1100 +STX2 1001 001 rr:5 1101 +STX3 1001 001 rr:5 1110 +STY2 1001 001 rd:5 1001 +STY3 1001 001 rd:5 1010 +STZ2 1001 001 rd:5 0001 +STZ3 1001 001 rd:5 0010 +STDY 10 . 0 .. 1 ..... 1 ... @ldst_d +STDZ 10 . 0 .. 1 ..... 0 ... @ldst_d +LPM1 1001 0101 1100 1000 +LPM2 1001 000 rd:5 0100 +LPMX 1001 000 rd:5 0101 +ELPM1 1001 0101 1101 1000 +ELPM2 1001 000 rd:5 0110 +ELPMX 1001 000 rd:5 0111 +SPM 1001 0101 1110 1000 +SPMX 1001 0101 1111 1000 +IN 1011 0 .. ..... .... @io_rd_imm +OUT 1011 1 .. ..... .... @io_rd_imm +PUSH 1001 001 rd:5 1111 +POP 1001 000 rd:5 1111 +XCH 1001 001 rd:5 0100 +LAC 1001 001 rd:5 0110 +LAS 1001 001 rd:5 0101 +LAT 1001 001 rd:5 0111 + +# +# Bit and Bit-test Instructions +# +LSR 1001 010 rd:5 0110 +ROR 1001 010 rd:5 0111 +ASR 1001 010 rd:5 0101 +SWAP 1001 010 rd:5 0010 +SBI 1001 1010 reg:5 bit:3 +CBI 1001 1000 reg:5 bit:3 +BST 1111 101 rd:5 0 bit:3 +BLD 1111 100 rd:5 0 bit:3 +BSET 1001 0100 0 bit:3 1000 +BCLR 1001 0100 1 bit:3 1000 + +# +# MCU Control Instructions +# +BREAK 1001 0101 1001 1000Quoted 8 lines
Quoted 8 lines
target/avr/insn.decode new file +4
-1+NOP 0000 0000 0000 0000 +SLEEP 1001 0101 1000 1000 +WDR 1001 0101 1010 1000 + --2.17.2 (Apple Git-113)
--
Best Regards,
Michael Rolnik
Re: [PATCH v39 03/22] target/avr: Add instruction decoding
Hi Aleksandar.
This seems less logical to me.
Then next thing will be to partition disassember part right?
Quoted 323 lines · Aleksandar Markovic
Quoted 15 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik
Hi Aleksandar.
please explain.
Quoted 2 lines
Hi, Michael.
I wanted to say:
Quoted 7 lines
1. Cut the parts of insn.decode that describe coding of arithmetic and logic instructions and include them in the patch:
target/avr: Add instruction translation - Arithmetic and Logic Instructions
Since that would be the first time insn.decode is mentioned in the new
organization of the series, the license preamble of insn.decode can be included in that patch, of course.
Best wishes,
AleksandarQuoted 288 lines
2. Cut the parts of insn.decode that describe coding of branch instructions and include them in the patch:
target/avr: Add instruction translation - Branch Instructions
3. Cut the parts of insn.decode that describe coding of data transfer instructions and include them in the patch:
target/avr: Add instruction translation - Data Transfer Instructions
4. Cut the parts of insn.decode that describe coding of bit and bit-test instructions and include them in the patch:
target/avr: Add instruction translation - Bit and Bit-test Instructions
5. Cut the parts of insn.decode that describe coding of MCU control instructions and include them in the patch:
target/avr: Add instruction translation - MCU Control Instructions
This way, your patches become logicaly-organized rather than file organized. The patch on, let's say, arithmetic and logic instructions will contain all elements needed for their implementation, rather than those elements being split between decode and omplementation parts .
Regards,
Aleksandar
Quoted 252 lines
Quoted 236 lines · Aleksandar Markovic
Quoted 7 lines · Michael Rolnik
This includes:
- encoding of all 16 bit instructions
- encoding of all 32 bit instructionsSigned-off-by Michael Rolnik <[email protected]>---
Michael,
I am very pleased that you rearranged the order to be in sync with the documentation.
Now, for the next version, I would ask you to make this patch disappear.
More precisely, "MCU Control Instructions" section of insn.decode file move to be a part of "Add MCU Control Instructions" (not sure abiut the title, but it is 6 or 7 patches after this one) patch, and so on, in the same fashion, for all groups of instructions.
Kind regards,
Aleksandar
target/avr/insn.decode | 183 +++++++++++++++++++++++++++++++++++++++++Quoted 203 lines
1 file changed, 183 insertions(+) create mode 100644 target/avr/insn.decodetarget/avr/insn.decode new file +17
-0@@ -0,0 +1,183 @@ +# +# AVR instruction decode definitions. +# +# Copyright (c) 2019 Michael Rolnik <[email protected]> +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>.
target/avr/insn.decode new file +36
-0+# + +# +# regs_16_31_by_one = [16 .. 31] +# regs_16_23_by_one = [16 .. 23] +# regs_24_30_by_two = [24, 26, 28, 30] +# regs_00_30_by_two = [0, 2, 4, 6, 8, .. 30] + +%rd 4:5 +%rr 9:1 0:4 + +%rd_a 4:4 !function=to_regs_16_31_by_one +%rd_b 4:3 !function=to_regs_16_23_by_one +%rd_c 4:2 !function=to_regs_24_30_by_two +%rd_d 4:4 !function=to_regs_00_30_by_two +%rr_a 0:4 !function=to_regs_16_31_by_one +%rr_b 0:3 !function=to_regs_16_23_by_one +%rr_d 0:4 !function=to_regs_00_30_by_two + +%imm6 6:2 0:4 +%imm8 8:4 0:4 + +%io_imm 9:2 0:4 +%ldst_d_imm 13:1 10:2 0:3 + +# The 22-bit immediate is partially in the opcode word, +# and partially in the next. Use append_16 to build the +# complete 22-bit value. +%imm_call 4:5 0:1 !function=append_16 + + +&rd_rr rd rr +&rd_imm rd imm + +@op_rd_rr .... .. . ..... .... &rd_rr rd=%rd rr=%rr +@op_rd_imm6 .... .... .. .. .... &rd_imm rd=%rd_cimm=%imm6
+@op_rd_imm8 .... .... .... ....&rd_immrd=%rd_a
imm=%imm8+@op_bit .... .... . bit:3 .... +@op_bit_imm .... .. imm:s7 bit:3 +@fmul .... .... . ... . ... &rd_rr rd=%rd_brr=%rr_b
+@io_rd_imm .... . .. ..... ....&rd_immrd=%rd
imm=%io_imm
+@ldst_d .. . . .. . rd:5 . ...&rd_imm
imm=%ldst_d_immtarget/avr/insn.decode new file +29
-0+ +# The 16-bit immediate is completely in the next word. +# Fields cannot be defined with no bits, so we cannot play +# the same trick and append to a zero-bit value. +# Defer reading the immediate until trans_{LDS,STS}. +@ldst_s .... ... rd:5 .... imm=0 + +# +# Arithmetic Instructions +# +ADD 0000 11 . ..... .... @op_rd_rr +ADC 0001 11 . ..... .... @op_rd_rr +ADIW 1001 0110 .. .. .... @op_rd_imm6 +SUB 0001 10 . ..... .... @op_rd_rr +SUBI 0101 .... .... .... @op_rd_imm8 +SBC 0000 10 . ..... .... @op_rd_rr +SBCI 0100 .... .... .... @op_rd_imm8 +SBIW 1001 0111 .. .. .... @op_rd_imm6 +AND 0010 00 . ..... .... @op_rd_rr +ANDI 0111 .... .... .... @op_rd_imm8 +OR 0010 10 . ..... .... @op_rd_rr +ORI 0110 .... .... .... @op_rd_imm8 +EOR 0010 01 . ..... .... @op_rd_rr +COM 1001 010 rd:5 0000 +NEG 1001 010 rd:5 0001 +INC 1001 010 rd:5 0011 +DEC 1001 010 rd:5 1010 +MUL 1001 11 . ..... .... @op_rd_rr +MULS 0000 0010 .... .... &rd_rr rd=%rd_arr=%rr_a
target/avr/insn.decode new file +35
-0+MULSU 0000 0011 0 ... 0 ... @fmul +FMUL 0000 0011 0 ... 1 ... @fmul +FMULS 0000 0011 1 ... 0 ... @fmul +FMULSU 0000 0011 1 ... 1 ... @fmul +DES 1001 0100 imm:4 1011 + +# +# Branch Instructions +# +RJMP 1100 imm:s12 +IJMP 1001 0100 0000 1001 +EIJMP 1001 0100 0001 1001 +JMP 1001 010 ..... 110 . imm=%imm_call +RCALL 1101 imm:s12 +ICALL 1001 0101 0000 1001 +EICALL 1001 0101 0001 1001 +CALL 1001 010 ..... 111 . imm=%imm_call +RET 1001 0101 0000 1000 +RETI 1001 0101 0001 1000 +CPSE 0001 00 . ..... .... @op_rd_rr +CP 0001 01 . ..... .... @op_rd_rr +CPC 0000 01 . ..... .... @op_rd_rr +CPI 0011 .... .... .... @op_rd_imm8 +SBRC 1111 110 rr:5 0 bit:3 +SBRS 1111 111 rr:5 0 bit:3 +SBIC 1001 1001 reg:5 bit:3 +SBIS 1001 1011 reg:5 bit:3 +BRBS 1111 00 ....... ... @op_bit_imm +BRBC 1111 01 ....... ... @op_bit_imm + +# +# Data Transfer Instructions +# +MOV 0010 11 . ..... .... @op_rd_rr +MOVW 0000 0001 .... .... &rd_rr rd=%rd_drr=%rr_d
target/avr/insn.decode new file +56
-0+LDI 1110 .... .... .... @op_rd_imm8 +LDS 1001 000 ..... 0000 @ldst_s +LDX1 1001 000 rd:5 1100 +LDX2 1001 000 rd:5 1101 +LDX3 1001 000 rd:5 1110 +LDY2 1001 000 rd:5 1001 +LDY3 1001 000 rd:5 1010 +LDZ2 1001 000 rd:5 0001 +LDZ3 1001 000 rd:5 0010 +LDDY 10 . 0 .. 0 ..... 1 ... @ldst_d +LDDZ 10 . 0 .. 0 ..... 0 ... @ldst_d +STS 1001 001 ..... 0000 @ldst_s +STX1 1001 001 rr:5 1100 +STX2 1001 001 rr:5 1101 +STX3 1001 001 rr:5 1110 +STY2 1001 001 rd:5 1001 +STY3 1001 001 rd:5 1010 +STZ2 1001 001 rd:5 0001 +STZ3 1001 001 rd:5 0010 +STDY 10 . 0 .. 1 ..... 1 ... @ldst_d +STDZ 10 . 0 .. 1 ..... 0 ... @ldst_d +LPM1 1001 0101 1100 1000 +LPM2 1001 000 rd:5 0100 +LPMX 1001 000 rd:5 0101 +ELPM1 1001 0101 1101 1000 +ELPM2 1001 000 rd:5 0110 +ELPMX 1001 000 rd:5 0111 +SPM 1001 0101 1110 1000 +SPMX 1001 0101 1111 1000 +IN 1011 0 .. ..... .... @io_rd_imm +OUT 1011 1 .. ..... .... @io_rd_imm +PUSH 1001 001 rd:5 1111 +POP 1001 000 rd:5 1111 +XCH 1001 001 rd:5 0100 +LAC 1001 001 rd:5 0110 +LAS 1001 001 rd:5 0101 +LAT 1001 001 rd:5 0111 + +# +# Bit and Bit-test Instructions +# +LSR 1001 010 rd:5 0110 +ROR 1001 010 rd:5 0111 +ASR 1001 010 rd:5 0101 +SWAP 1001 010 rd:5 0010 +SBI 1001 1010 reg:5 bit:3 +CBI 1001 1000 reg:5 bit:3 +BST 1111 101 rd:5 0 bit:3 +BLD 1111 100 rd:5 0 bit:3 +BSET 1001 0100 0 bit:3 1000 +BCLR 1001 0100 1 bit:3 1000 + +# +# MCU Control Instructions +# +BREAK 1001 0101 1001 1000Quoted 8 lines
Quoted 8 lines
target/avr/insn.decode new file +4
-1+NOP 0000 0000 0000 0000 +SLEEP 1001 0101 1000 1000 +WDR 1001 0101 1010 1000 + --2.17.2 (Apple Git-113)
--
Best Regards,
Michael Rolnik
Signature · 2 lines
Best Regards, Michael Rolnik
Re: [PATCH v39 03/22] target/avr: Add instruction decoding
Quoted 7 lines · Michael Rolnik
Hi Aleksandar.
This seems less logical to me.
Then next thing will be to partition disassember part right?
Please respond inline in future, since inline redponding is standard for this mailing list.
What is not logical to you?
I am trying to teach you how to create patches that are logical units easy to understand and review.
In my view, yout series doesn't satisfy that basic requirement of being organized in proper logical units that are expected from any series to be accepted. (The worst part is patch 1)
Regards,
Aleksandsr
Quoted 336 lines
Quoted 27 lines · Aleksandar Markovic
Quoted 22 lines · Aleksandar Markovic
Quoted 6 lines · Michael Rolnik
Hi Aleksandar.
please explain.
Quoted 2 lines
Hi, Michael.
I wanted to say:
1. Cut the parts of insn.decode that describe coding of arithmetic and logic instructions and include them in the patch:
target/avr: Add instruction translation - Arithmetic and Logic Instructions
Quoted 299 lines
Quoted 1 line
Since that would be the first time insn.decode is mentioned in the new
organization of the series, the license preamble of insn.decode can be included in that patch, of course.
Best wishes,
AleksandarQuoted 290 lines
2. Cut the parts of insn.decode that describe coding of branch instructions and include them in the patch:
target/avr: Add instruction translation - Branch Instructions
3. Cut the parts of insn.decode that describe coding of data transfer instructions and include them in the patch:
target/avr: Add instruction translation - Data Transfer Instructions
4. Cut the parts of insn.decode that describe coding of bit and bit-test instructions and include them in the patch:
target/avr: Add instruction translation - Bit and Bit-test Instructions
5. Cut the parts of insn.decode that describe coding of MCU control instructions and include them in the patch:
target/avr: Add instruction translation - MCU Control Instructions
This way, your patches become logicaly-organized rather than file organized. The patch on, let's say, arithmetic and logic instructions will contain all elements needed for their implementation, rather than those elements being split between decode and omplementation parts .
Regards,
Aleksandar
Quoted 254 lines
Quoted 238 lines · Aleksandar Markovic
Quoted 7 lines · Michael Rolnik
This includes:
- encoding of all 16 bit instructions
- encoding of all 32 bit instructionsSigned-off-by Michael Rolnik <[email protected]>---
Michael,
I am very pleased that you rearranged the order to be in sync with the documentation.
Now, for the next version, I would ask you to make this patch disappear.
More precisely, "MCU Control Instructions" section of insn.decode file move to be a part of "Add MCU Control Instructions" (not sure abiut the title, but it is 6 or 7 patches after this one) patch, and so on, in the same fashion, for all groups of instructions.
Kind regards,
Aleksandar
target/avr/insn.decode | 183 ++++++++++++++++++++++++++++++Quoted 204 lines
+++++++++++
1 file changed, 183 insertions(+) create mode 100644 target/avr/insn.decodetarget/avr/insn.decode new file +17
-0@@ -0,0 +1,183 @@ +# +# AVR instruction decode definitions. +# +# Copyright (c) 2019 Michael Rolnik <[email protected]> +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see <http://www.gnu.org/licenses/>.
target/avr/insn.decode new file +36
-0+# + +# +# regs_16_31_by_one = [16 .. 31] +# regs_16_23_by_one = [16 .. 23] +# regs_24_30_by_two = [24, 26, 28, 30] +# regs_00_30_by_two = [0, 2, 4, 6, 8, .. 30] + +%rd 4:5 +%rr 9:1 0:4 + +%rd_a 4:4 !function=to_regs_16_31_by_one +%rd_b 4:3 !function=to_regs_16_23_by_one +%rd_c 4:2 !function=to_regs_24_30_by_two +%rd_d 4:4 !function=to_regs_00_30_by_two +%rr_a 0:4 !function=to_regs_16_31_by_one +%rr_b 0:3 !function=to_regs_16_23_by_one +%rr_d 0:4 !function=to_regs_00_30_by_two + +%imm6 6:2 0:4 +%imm8 8:4 0:4 + +%io_imm 9:2 0:4 +%ldst_d_imm 13:1 10:2 0:3 + +# The 22-bit immediate is partially in the opcode word, +# and partially in the next. Use append_16 to build the +# complete 22-bit value. +%imm_call 4:5 0:1 !function=append_16 + + +&rd_rr rd rr +&rd_imm rd imm + +@op_rd_rr .... .. . ..... .... &rd_rr rd=%rd rr=%rr +@op_rd_imm6 .... .... .. .. .... &rd_imm rd=%rd_cimm=%imm6
+@op_rd_imm8 .... .... .... ....&rd_immrd=%rd_a
imm=%imm8+@op_bit .... .... . bit:3 .... +@op_bit_imm .... .. imm:s7 bit:3 +@fmul .... .... . ... . ... &rd_rr rd=%rd_brr=%rr_b
+@io_rd_imm .... . .. ..... ....&rd_immrd=%rd
imm=%io_imm
+@ldst_d .. . . .. . rd:5 . ...&rd_imm
imm=%ldst_d_immtarget/avr/insn.decode new file +29
-0+ +# The 16-bit immediate is completely in the next word. +# Fields cannot be defined with no bits, so we cannot play +# the same trick and append to a zero-bit value. +# Defer reading the immediate until trans_{LDS,STS}. +@ldst_s .... ... rd:5 .... imm=0 + +# +# Arithmetic Instructions +# +ADD 0000 11 . ..... .... @op_rd_rr +ADC 0001 11 . ..... .... @op_rd_rr +ADIW 1001 0110 .. .. .... @op_rd_imm6 +SUB 0001 10 . ..... .... @op_rd_rr +SUBI 0101 .... .... .... @op_rd_imm8 +SBC 0000 10 . ..... .... @op_rd_rr +SBCI 0100 .... .... .... @op_rd_imm8 +SBIW 1001 0111 .. .. .... @op_rd_imm6 +AND 0010 00 . ..... .... @op_rd_rr +ANDI 0111 .... .... .... @op_rd_imm8 +OR 0010 10 . ..... .... @op_rd_rr +ORI 0110 .... .... .... @op_rd_imm8 +EOR 0010 01 . ..... .... @op_rd_rr +COM 1001 010 rd:5 0000 +NEG 1001 010 rd:5 0001 +INC 1001 010 rd:5 0011 +DEC 1001 010 rd:5 1010 +MUL 1001 11 . ..... .... @op_rd_rr +MULS 0000 0010 .... .... &rd_rr rd=%rd_arr=%rr_a
target/avr/insn.decode new file +35
-0+MULSU 0000 0011 0 ... 0 ... @fmul +FMUL 0000 0011 0 ... 1 ... @fmul +FMULS 0000 0011 1 ... 0 ... @fmul +FMULSU 0000 0011 1 ... 1 ... @fmul +DES 1001 0100 imm:4 1011 + +# +# Branch Instructions +# +RJMP 1100 imm:s12 +IJMP 1001 0100 0000 1001 +EIJMP 1001 0100 0001 1001 +JMP 1001 010 ..... 110 . imm=%imm_call +RCALL 1101 imm:s12 +ICALL 1001 0101 0000 1001 +EICALL 1001 0101 0001 1001 +CALL 1001 010 ..... 111 . imm=%imm_call +RET 1001 0101 0000 1000 +RETI 1001 0101 0001 1000 +CPSE 0001 00 . ..... .... @op_rd_rr +CP 0001 01 . ..... .... @op_rd_rr +CPC 0000 01 . ..... .... @op_rd_rr +CPI 0011 .... .... .... @op_rd_imm8 +SBRC 1111 110 rr:5 0 bit:3 +SBRS 1111 111 rr:5 0 bit:3 +SBIC 1001 1001 reg:5 bit:3 +SBIS 1001 1011 reg:5 bit:3 +BRBS 1111 00 ....... ... @op_bit_imm +BRBC 1111 01 ....... ... @op_bit_imm + +# +# Data Transfer Instructions +# +MOV 0010 11 . ..... .... @op_rd_rr +MOVW 0000 0001 .... .... &rd_rr rd=%rd_drr=%rr_d
target/avr/insn.decode new file +56
-0+LDI 1110 .... .... .... @op_rd_imm8 +LDS 1001 000 ..... 0000 @ldst_s +LDX1 1001 000 rd:5 1100 +LDX2 1001 000 rd:5 1101 +LDX3 1001 000 rd:5 1110 +LDY2 1001 000 rd:5 1001 +LDY3 1001 000 rd:5 1010 +LDZ2 1001 000 rd:5 0001 +LDZ3 1001 000 rd:5 0010 +LDDY 10 . 0 .. 0 ..... 1 ... @ldst_d +LDDZ 10 . 0 .. 0 ..... 0 ... @ldst_d +STS 1001 001 ..... 0000 @ldst_s +STX1 1001 001 rr:5 1100 +STX2 1001 001 rr:5 1101 +STX3 1001 001 rr:5 1110 +STY2 1001 001 rd:5 1001 +STY3 1001 001 rd:5 1010 +STZ2 1001 001 rd:5 0001 +STZ3 1001 001 rd:5 0010 +STDY 10 . 0 .. 1 ..... 1 ... @ldst_d +STDZ 10 . 0 .. 1 ..... 0 ... @ldst_d +LPM1 1001 0101 1100 1000 +LPM2 1001 000 rd:5 0100 +LPMX 1001 000 rd:5 0101 +ELPM1 1001 0101 1101 1000 +ELPM2 1001 000 rd:5 0110 +ELPMX 1001 000 rd:5 0111 +SPM 1001 0101 1110 1000 +SPMX 1001 0101 1111 1000 +IN 1011 0 .. ..... .... @io_rd_imm +OUT 1011 1 .. ..... .... @io_rd_imm +PUSH 1001 001 rd:5 1111 +POP 1001 000 rd:5 1111 +XCH 1001 001 rd:5 0100 +LAC 1001 001 rd:5 0110 +LAS 1001 001 rd:5 0101 +LAT 1001 001 rd:5 0111 + +# +# Bit and Bit-test Instructions +# +LSR 1001 010 rd:5 0110 +ROR 1001 010 rd:5 0111 +ASR 1001 010 rd:5 0101 +SWAP 1001 010 rd:5 0010 +SBI 1001 1010 reg:5 bit:3 +CBI 1001 1000 reg:5 bit:3 +BST 1111 101 rd:5 0 bit:3 +BLD 1111 100 rd:5 0 bit:3 +BSET 1001 0100 0 bit:3 1000 +BCLR 1001 0100 1 bit:3 1000 + +# +# MCU Control Instructions +# +BREAK 1001 0101 1001 1000Quoted 8 lines
Quoted 8 lines
target/avr/insn.decode new file +4
-1+NOP 0000 0000 0000 0000 +SLEEP 1001 0101 1000 1000 +WDR 1001 0101 1010 1000 + --2.17.2 (Apple Git-113)
--
Best Regards,
Michael Rolnik--
Best Regards,
Michael Rolnik
PATCH v39 4/22 target/avr: Add instruction translation - Registers definition
In reply to Michael Rolnik--- target/avr/translate.c | 143 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 target/avr/translate.c
target/avr/translate.c new file +143 -0
@@ -0,0 +1,143 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#include "qemu/osdep.h" +#include "qemu/qemu-print.h" +#include "tcg/tcg.h" +#include "cpu.h" +#include "exec/exec-all.h" +#include "tcg-op.h" +#include "exec/cpu_ldst.h" +#include "exec/helper-proto.h" +#include "exec/helper-gen.h" +#include "exec/log.h" +#include "exec/translator.h" +#include "exec/gen-icount.h" + +/* +* Define if you want a BREAK instruction translated to a breakpoint +* Active debugging connection is assumed +* This is for +* https://github.com/seharris/qemu-avr-tests/tree/master/instruction-tests +* tests +*/ +#undef BREAKPOINT_ON_BREAK + +static TCGv cpu_pc; + +static TCGv cpu_Cf; +static TCGv cpu_Zf; +static TCGv cpu_Nf; +static TCGv cpu_Vf; +static TCGv cpu_Sf; +static TCGv cpu_Hf; +static TCGv cpu_Tf; +static TCGv cpu_If; + +static TCGv cpu_rampD; +static TCGv cpu_rampX; +static TCGv cpu_rampY; +static TCGv cpu_rampZ; + +static TCGv cpu_r[NUMBER_OF_CPU_REGISTERS ]; +static TCGv cpu_eind; +static TCGv cpu_sp; + +static TCGv cpu_skip; + +static const char reg_names[NUMBER_OF_CPU_REGISTERS ][8 ] = { +"r0" ,"r1" ,"r2" ,"r3" ,"r4" ,"r5" ,"r6" ,"r7" , +"r8" ,"r9" ,"r10" ,"r11" ,"r12" ,"r13" ,"r14" ,"r15" , +"r16" ,"r17" ,"r18" ,"r19" ,"r20" ,"r21" ,"r22" ,"r23" , +"r24" ,"r25" ,"r26" ,"r27" ,"r28" ,"r29" ,"r30" ,"r31" , +}; +#define REG (x) (cpu_r[x]) + +enum { +DISAS_EXIT =DISAS_TARGET_0 ,/* We want return to the cpu main loop. */ +DISAS_LOOKUP =DISAS_TARGET_1 ,/* We have a variable condition exit. */ +DISAS_CHAIN =DISAS_TARGET_2 ,/* We have a single condition exit. */ +}; + +typedef struct DisasContext DisasContext ; + +/* This is the state at translation time. */ +struct DisasContext { +TranslationBlock *tb; + +CPUAVRState *env; +CPUState *cs; + +target_long npc; +uint32_t opcode; + +/* Routine used to access memory */ +int memidx; +int bstate; +int singlestep; + +TCGv skip_var0; +TCGv skip_var1; +TCGCond skip_cond; +bool free_skip_var0; +}; + +static int to_regs_16_31_by_one (DisasContext *ctx,int indx) +{ +return 16 + (indx %16 ); +} + +static int to_regs_16_23_by_one (DisasContext *ctx,int indx) +{ +return 16 + (indx %8 ); +} +static int to_regs_24_30_by_two (DisasContext *ctx,int indx) +{ +return 24 + (indx %4 ) *2 ; +} +static int to_regs_00_30_by_two (DisasContext *ctx,int indx) +{ +return (indx %16 ) *2 ; +} + +static uint16_t next_word (DisasContext *ctx) +{ +return cpu_lduw_code (ctx->env, ctx->npc++ *2 ); +} + +static int append_16 (DisasContext *ctx,int x) +{ +return x <<16 |next_word (ctx); +} + + +static bool avr_have_feature (DisasContext *ctx,int feature) +{ +if (!avr_feature (ctx->env, feature)) { +gen_helper_unsupported (cpu_env); + ctx->bstate =DISAS_NORETURN ; +return false; + } +return true; +} + +static bool decode_insn (DisasContext *ctx,uint16_t insn); +#include "decode_insn.inc.c" +
Signature · 1 line
2.17.2 (Apple Git-113)
Re: [PATCH v39 04/22] target/avr: Add instruction translation - Registers definition
Quoted 107 lines · Michael Rolnik
Signed-off-by Michael Rolnik <[email protected]>Reviewed-by Philippe Mathieu-Daudé <[email protected]>--- target/avr/translate.c | 143 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 target/avr/translate.ctarget/avr/translate.c new file +38
-0@@ -0,0 +1,143 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#include "qemu/osdep.h" +#include "qemu/qemu-print.h" +#include "tcg/tcg.h" +#include "cpu.h" +#include "exec/exec-all.h" +#include "tcg-op.h" +#include "exec/cpu_ldst.h" +#include "exec/helper-proto.h" +#include "exec/helper-gen.h" +#include "exec/log.h" +#include "exec/translator.h" +#include "exec/gen-icount.h" + +/* +* Define if you want a BREAK instruction translated to a breakpoint +* Active debugging connection is assumed +* This is for +* https://github.com/seharris/qemu-avr-tests/tree/master/ instruction-tests
+ * tests
+ */target/avr/translate.c new file +34
-0+#undef BREAKPOINT_ON_BREAK + +static TCGv cpu_pc; + +static TCGv cpu_Cf; +static TCGv cpu_Zf; +static TCGv cpu_Nf; +static TCGv cpu_Vf; +static TCGv cpu_Sf; +static TCGv cpu_Hf; +static TCGv cpu_Tf; +static TCGv cpu_If; + +static TCGv cpu_rampD; +static TCGv cpu_rampX; +static TCGv cpu_rampY; +static TCGv cpu_rampZ; + +static TCGv cpu_r[NUMBER_OF_CPU_REGISTERS ]; +static TCGv cpu_eind; +static TCGv cpu_sp; + +static TCGv cpu_skip; + +static const char reg_names[NUMBER_OF_CPU_REGISTERS ][8 ] = { +"r0" ,"r1" ,"r2" ,"r3" ,"r4" ,"r5" ,"r6" ,"r7" , +"r8" ,"r9" ,"r10" ,"r11" ,"r12" ,"r13" ,"r14" ,"r15" , +"r16" ,"r17" ,"r18" ,"r19" ,"r20" ,"r21" ,"r22" ,"r23" , +"r24" ,"r25" ,"r26" ,"r27" ,"r28" ,"r29" ,"r30" ,"r31" , +}; +#define REG (x) (cpu_r[x]) + +enum { +DISAS_EXIT =DISAS_TARGET_0 ,/* We want return to the cpu main loop. */
+DISAS_LOOKUP=DISAS_TARGET_1, /* We have a variable condition
exit. */
+DISAS_CHAIN=DISAS_TARGET_2, /* We have a single condition exit.
*/target/avr/translate.c new file +13
-0+}; + +typedef struct DisasContext DisasContext ; + +/* This is the state at translation time. */ +struct DisasContext { +TranslationBlock *tb; + +CPUAVRState *env; +CPUState *cs; + +target_long npc; +uint32_t opcode;
target/avr/translate.c line 99
Quoted 10 lines
target/avr/translate.c new file +10
-0+ +/* Routine used to access memory */ +int memidx; +int bstate; +int singlestep; + +TCGv skip_var0; +TCGv skip_var1; +TCGCond skip_cond; +bool free_skip_var0;
[PATCH v36 04/17] target/avr: Add instruction translation - Registers definition
Inbox
M
Michael Rolnik
target/avr/translate.c | 132 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 132 in...
A
Aleksandar Markovic
to Michael, QEMU, Richard, +5
Nov 26
Details
This set of four lines are by far the hardest to connect to the documentation.
Please add before them a sizable comment with explanations for:
- the reason these variables are introduced
- why are they here (part of DisasContext)
- what other variables elsewhere in your solutiin are closely related to these four variables
- what they affect
- summary of the way they work
Perhaps add comments to other places where "skip"-related data fields are introduced too.
(I believe the implementation is correct, but it is extremely hard to the reader
to reverse-engineer the intentions)
Yours, Aleksandar
Aleksa
Quoted 48 lines
target/avr/translate.c new file +44
-1+}; + +static int to_regs_16_31_by_one (DisasContext *ctx,int indx) +{ +return 16 + (indx %16 ); +} + +static int to_regs_16_23_by_one (DisasContext *ctx,int indx) +{ +return 16 + (indx %8 ); +} +static int to_regs_24_30_by_two (DisasContext *ctx,int indx) +{ +return 24 + (indx %4 ) *2 ; +} +static int to_regs_00_30_by_two (DisasContext *ctx,int indx) +{ +return (indx %16 ) *2 ; +} + +static uint16_t next_word (DisasContext *ctx) +{ +return cpu_lduw_code (ctx->env, ctx->npc++ *2 ); +} + +static int append_16 (DisasContext *ctx,int x) +{ +return x <<16 |next_word (ctx); +} + + +static bool avr_have_feature (DisasContext *ctx,int feature) +{ +if (!avr_feature (ctx->env, feature)) { +gen_helper_unsupported (cpu_env); + ctx->bstate =DISAS_NORETURN ; +return false; + } +return true; +} + +static bool decode_insn (DisasContext *ctx,uint16_t insn); +#include "decode_insn.inc.c" + --2.17.2 (Apple Git-113)
PATCH v39 5/22 target/avr: Add instruction translation - Arithmetic and Logic Instructions
In reply to Michael RolnikThis includes:
- ADD, ADC, ADIW
- SBIW, SUB, SUBI, SBC, SBCI
- AND, ANDI
- OR, ORI, EOR
- COM, NEG
- INC, DEC
- MUL, MULS, MULSU
- FMUL, FMULS, FMULSU
- DES
--- target/avr/translate.c | 714 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 714 insertions(+)
target/avr/translate.c +714 -0
@@ -141,3 +141,717 @@ static bool avr_have_feature(DisasContext *ctx, int feature)static bool decode_insn (DisasContext *ctx,uint16_t insn);#include "decode_insn.inc.c" +/* +* Arithmetic Instructions +*/ + +static void gen_add_CHf (TCGv R ,TCGv Rd,TCGv Rr) +{ +TCGv t1 =tcg_temp_new_i32 (); +TCGv t2 =tcg_temp_new_i32 (); +TCGv t3 =tcg_temp_new_i32 (); + +tcg_gen_and_tl (t1, Rd, Rr);/* t1 = Rd & Rr */ +tcg_gen_andc_tl (t2, Rd,R );/* t2 = Rd & ~R */ +tcg_gen_andc_tl (t3, Rr,R );/* t3 = Rr & ~R */ +tcg_gen_or_tl (t1, t1, t2);/* t1 = t1 | t2 | t3 */ +tcg_gen_or_tl (t1, t1, t3); +tcg_gen_shri_tl (cpu_Cf, t1,7 );/* Cf = t1(7) */ +tcg_gen_shri_tl (cpu_Hf, t1,3 );/* Hf = t1(3) */ +tcg_gen_andi_tl (cpu_Hf, cpu_Hf,1 ); + +tcg_temp_free_i32 (t3); +tcg_temp_free_i32 (t2); +tcg_temp_free_i32 (t1); +} + + +static void gen_add_Vf (TCGv R ,TCGv Rd,TCGv Rr) +{ +TCGv t1 =tcg_temp_new_i32 (); +TCGv t2 =tcg_temp_new_i32 (); + +/* t1 = Rd & Rr & ~R | ~Rd & ~Rr & R */ +/* = (Rd ^ R) & ~(Rd ^ Rr) */ +tcg_gen_xor_tl (t1, Rd,R ); +tcg_gen_xor_tl (t2, Rd, Rr); +tcg_gen_andc_tl (t1, t1, t2); +tcg_gen_shri_tl (cpu_Vf, t1,7 );/* Vf = t1(7) */ + +tcg_temp_free_i32 (t2); +tcg_temp_free_i32 (t1); +} + + +static void gen_sub_CHf (TCGv R ,TCGv Rd,TCGv Rr) +{ +TCGv t1 =tcg_temp_new_i32 (); +TCGv t2 =tcg_temp_new_i32 (); +TCGv t3 =tcg_temp_new_i32 (); + +tcg_gen_not_tl (t1, Rd);/* t1 = ~Rd */ +tcg_gen_and_tl (t2, t1, Rr);/* t2 = ~Rd & Rr */ +tcg_gen_or_tl (t3, t1, Rr);/* t3 = (~Rd | Rr) & R */ +tcg_gen_and_tl (t3, t3,R ); +tcg_gen_or_tl (t2, t2, t3);/* t2 = ~Rd & Rr | ~Rd & R | R & Rr */ +tcg_gen_shri_tl (cpu_Cf, t2,7 );/* Cf = t2(7) */ +tcg_gen_shri_tl (cpu_Hf, t2,3 );/* Hf = t2(3) */ +tcg_gen_andi_tl (cpu_Hf, cpu_Hf,1 ); + +tcg_temp_free_i32 (t3); +tcg_temp_free_i32 (t2); +tcg_temp_free_i32 (t1); +} + + +static void gen_sub_Vf (TCGv R ,TCGv Rd,TCGv Rr) +{ +TCGv t1 =tcg_temp_new_i32 (); +TCGv t2 =tcg_temp_new_i32 (); + +/* t1 = Rd & ~Rr & ~R | ~Rd & Rr & R */ +/* = (Rd ^ R) & (Rd ^ R) */ +tcg_gen_xor_tl (t1, Rd,R ); +tcg_gen_xor_tl (t2, Rd, Rr); +tcg_gen_and_tl (t1, t1, t2); +tcg_gen_shri_tl (cpu_Vf, t1,7 );/* Vf = t1(7) */ + +tcg_temp_free_i32 (t2); +tcg_temp_free_i32 (t1); +} + + +static void gen_NSf (TCGv R ) +{ +tcg_gen_shri_tl (cpu_Nf,R ,7 );/* Nf = R(7) */ +tcg_gen_xor_tl (cpu_Sf, cpu_Nf, cpu_Vf);/* Sf = Nf ^ Vf */ +} + + +static void gen_ZNSf (TCGv R ) +{ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ +tcg_gen_shri_tl (cpu_Nf,R ,7 );/* Nf = R(7) */ +tcg_gen_xor_tl (cpu_Sf, cpu_Nf, cpu_Vf);/* Sf = Nf ^ Vf */ +} + +/* +* Adds two registers without the C Flag and places the result in the +* destination register Rd. +*/ +static bool trans_ADD (DisasContext *ctx,arg_ADD *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_add_tl (R , Rd, Rr);/* Rd = Rd + Rr */ +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ +gen_add_CHf (R , Rd, Rr); +gen_add_Vf (R , Rd, Rr); +gen_ZNSf (R ); +tcg_gen_mov_tl (Rd,R ); + +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* Adds two registers and the contents of the C Flag and places the result in +* the destination register Rd. +*/ +static bool trans_ADC (DisasContext *ctx,arg_ADC *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_add_tl (R , Rd, Rr);/* R = Rd + Rr + Cf */ +tcg_gen_add_tl (R ,R , cpu_Cf); +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ +gen_add_CHf (R , Rd, Rr); +gen_add_Vf (R , Rd, Rr); +gen_ZNSf (R ); +tcg_gen_mov_tl (Rd,R ); + +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* Adds an immediate value (0 - 63) to a register pair and places the result +* in the register pair. This instruction operates on the upper four register +* pairs, and is well suited for operations on the pointer registers. This +* instruction is not available in all devices. Refer to the device specific +* instruction set summary. +*/ +static bool trans_ADIW (DisasContext *ctx,arg_ADIW *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_ADIW_SBIW )) { +return true; + } + +TCGv RdL = cpu_r[a->rd]; +TCGv RdH = cpu_r[a->rd +1 ]; +int Imm = (a->imm); +TCGv R =tcg_temp_new_i32 (); +TCGv Rd =tcg_temp_new_i32 (); + +tcg_gen_deposit_tl (Rd, RdL, RdH,8 ,8 );/* Rd = RdH:RdL */ +tcg_gen_addi_tl (R , Rd, Imm);/* R = Rd + Imm */ +tcg_gen_andi_tl (R ,R ,0xffff );/* make it 16 bits */ + +tcg_gen_andc_tl (cpu_Cf, Rd,R );/* Cf = Rd & ~R */ +tcg_gen_shri_tl (cpu_Cf, cpu_Cf,15 ); +tcg_gen_andc_tl (cpu_Vf,R , Rd);/* Vf = R & ~Rd */ +tcg_gen_shri_tl (cpu_Vf, cpu_Vf,15 ); +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ +tcg_gen_shri_tl (cpu_Nf,R ,15 );/* Nf = R(15) */ +tcg_gen_xor_tl (cpu_Sf, cpu_Nf, cpu_Vf);/* Sf = Nf ^ Vf */ +tcg_gen_andi_tl (RdL,R ,0xff ); +tcg_gen_shri_tl (RdH,R ,8 ); + +tcg_temp_free_i32 (Rd); +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* Subtracts two registers and places the result in the destination +* register Rd. +*/ +static bool trans_SUB (DisasContext *ctx,arg_SUB *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_sub_tl (R , Rd, Rr);/* R = Rd - Rr */ +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ +gen_sub_CHf (R , Rd, Rr); +gen_sub_Vf (R , Rd, Rr); +gen_ZNSf (R ); +tcg_gen_mov_tl (Rd,R ); + +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* Subtracts a register and a constant and places the result in the +* destination register Rd. This instruction is working on Register R16 to R31 +* and is very well suited for operations on the X, Y, and Z-pointers. +*/ +static bool trans_SUBI (DisasContext *ctx,arg_SUBI *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr =tcg_const_i32 (a->imm); +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_sub_tl (R , Rd, Rr);/* R = Rd - Imm */ +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ +gen_sub_CHf (R , Rd, Rr); +gen_sub_Vf (R , Rd, Rr); +gen_ZNSf (R ); +tcg_gen_mov_tl (Rd,R ); + +tcg_temp_free_i32 (R ); +tcg_temp_free_i32 (Rr); + +return true; +} + +/* +* Subtracts two registers and subtracts with the C Flag and places the +* result in the destination register Rd. +*/ +static bool trans_SBC (DisasContext *ctx,arg_SBC *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); +TCGv zero =tcg_const_i32 (0 ); + +tcg_gen_sub_tl (R , Rd, Rr);/* R = Rd - Rr - Cf */ +tcg_gen_sub_tl (R ,R , cpu_Cf); +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ +gen_sub_CHf (R , Rd, Rr); +gen_sub_Vf (R , Rd, Rr); +gen_NSf (R ); + +/* +* Previous value remains unchanged when the result is zero; +* cleared otherwise. +*/ +tcg_gen_movcond_tl (TCG_COND_EQ , cpu_Zf,R , zero, cpu_Zf, zero); +tcg_gen_mov_tl (Rd,R ); + +tcg_temp_free_i32 (zero); +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* SBCI -- Subtract Immediate with Carry +*/ +static bool trans_SBCI (DisasContext *ctx,arg_SBCI *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr =tcg_const_i32 (a->imm); +TCGv R =tcg_temp_new_i32 (); +TCGv zero =tcg_const_i32 (0 ); + +tcg_gen_sub_tl (R , Rd, Rr);/* R = Rd - Rr - Cf */ +tcg_gen_sub_tl (R ,R , cpu_Cf); +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ +gen_sub_CHf (R , Rd, Rr); +gen_sub_Vf (R , Rd, Rr); +gen_NSf (R ); + +/* +* Previous value remains unchanged when the result is zero; +* cleared otherwise. +*/ +tcg_gen_movcond_tl (TCG_COND_EQ , cpu_Zf,R , zero, cpu_Zf, zero); +tcg_gen_mov_tl (Rd,R ); + +tcg_temp_free_i32 (zero); +tcg_temp_free_i32 (R ); +tcg_temp_free_i32 (Rr); + +return true; +} + +/* +* Subtracts an immediate value (0-63) from a register pair and places the +* result in the register pair. This instruction operates on the upper four +* register pairs, and is well suited for operations on the Pointer Registers. +* This instruction is not available in all devices. Refer to the device +* specific instruction set summary. +*/ +static bool trans_SBIW (DisasContext *ctx,arg_SBIW *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_ADIW_SBIW )) { +return true; + } + +TCGv RdL = cpu_r[a->rd]; +TCGv RdH = cpu_r[a->rd +1 ]; +int Imm = (a->imm); +TCGv R =tcg_temp_new_i32 (); +TCGv Rd =tcg_temp_new_i32 (); + +tcg_gen_deposit_tl (Rd, RdL, RdH,8 ,8 );/* Rd = RdH:RdL */ +tcg_gen_subi_tl (R , Rd, Imm);/* R = Rd - Imm */ +tcg_gen_andi_tl (R ,R ,0xffff );/* make it 16 bits */ +tcg_gen_andc_tl (cpu_Cf,R , Rd); +tcg_gen_shri_tl (cpu_Cf, cpu_Cf,15 );/* Cf = R & ~Rd */ +tcg_gen_andc_tl (cpu_Vf, Rd,R ); +tcg_gen_shri_tl (cpu_Vf, cpu_Vf,15 );/* Vf = Rd & ~R */ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ +tcg_gen_shri_tl (cpu_Nf,R ,15 );/* Nf = R(15) */ +tcg_gen_xor_tl (cpu_Sf, cpu_Nf, cpu_Vf);/* Sf = Nf ^ Vf */ +tcg_gen_andi_tl (RdL,R ,0xff ); +tcg_gen_shri_tl (RdH,R ,8 ); + +tcg_temp_free_i32 (Rd); +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* Performs the logical AND between the contents of register Rd and register +* Rr and places the result in the destination register Rd. +*/ +static bool trans_AND (DisasContext *ctx,arg_AND *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_and_tl (R , Rd, Rr);/* Rd = Rd and Rr */ +tcg_gen_movi_tl (cpu_Vf,0 );/* Vf = 0 */ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ +gen_ZNSf (R ); +tcg_gen_mov_tl (Rd,R ); + +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* Performs the logical AND between the contents of register Rd and a constant +* and places the result in the destination register Rd. +*/ +static bool trans_ANDI (DisasContext *ctx,arg_ANDI *a) +{ +TCGv Rd = cpu_r[a->rd]; +int Imm = (a->imm); + +tcg_gen_andi_tl (Rd, Rd, Imm);/* Rd = Rd & Imm */ +tcg_gen_movi_tl (cpu_Vf,0x00 );/* Vf = 0 */ +gen_ZNSf (Rd); + +return true; +} + +/* +* Performs the logical OR between the contents of register Rd and register +* Rr and places the result in the destination register Rd. +*/ +static bool trans_OR (DisasContext *ctx,arg_OR *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_or_tl (R , Rd, Rr); +tcg_gen_movi_tl (cpu_Vf,0 ); +gen_ZNSf (R ); +tcg_gen_mov_tl (Rd,R ); + +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* Performs the logical OR between the contents of register Rd and a +* constant and places the result in the destination register Rd. +*/ +static bool trans_ORI (DisasContext *ctx,arg_ORI *a) +{ +TCGv Rd = cpu_r[a->rd]; +int Imm = (a->imm); + +tcg_gen_ori_tl (Rd, Rd, Imm);/* Rd = Rd | Imm */ +tcg_gen_movi_tl (cpu_Vf,0x00 );/* Vf = 0 */ +gen_ZNSf (Rd); + +return true; +} + +/* +* Performs the logical EOR between the contents of register Rd and +* register Rr and places the result in the destination register Rd. +*/ +static bool trans_EOR (DisasContext *ctx,arg_EOR *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; + +tcg_gen_xor_tl (Rd, Rd, Rr); +tcg_gen_movi_tl (cpu_Vf,0 ); +gen_ZNSf (Rd); + +return true; +} + +/* +* Clears the specified bits in register Rd. Performs the logical AND +* between the contents of register Rd and the complement of the constant mask +* K. The result will be placed in register Rd. +*/ +static bool trans_COM (DisasContext *ctx,arg_COM *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_xori_tl (Rd, Rd,0xff ); +tcg_gen_movi_tl (cpu_Cf,1 );/* Cf = 1 */ +tcg_gen_movi_tl (cpu_Vf,0 );/* Vf = 0 */ +gen_ZNSf (Rd); + +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* Replaces the contents of register Rd with its two's complement; the +* value $80 is left unchanged. +*/ +static bool trans_NEG (DisasContext *ctx,arg_NEG *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv t0 =tcg_const_i32 (0 ); +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_sub_tl (R , t0, Rd);/* R = 0 - Rd */ +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ +gen_sub_CHf (R , t0, Rd); +gen_sub_Vf (R , t0, Rd); +gen_ZNSf (R ); +tcg_gen_mov_tl (Rd,R ); + +tcg_temp_free_i32 (t0); +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* Adds one -1- to the contents of register Rd and places the result in the +* destination register Rd. The C Flag in SREG is not affected by the +* operation, thus allowing the INC instruction to be used on a loop counter in +* multiple-precision computations. When operating on unsigned numbers, only +* BREQ and BRNE branches can be expected to perform consistently. When +* operating on two's complement values, all signed branches are available. +*/ +static bool trans_INC (DisasContext *ctx,arg_INC *a) +{ +TCGv Rd = cpu_r[a->rd]; + +tcg_gen_addi_tl (Rd, Rd,1 ); +tcg_gen_andi_tl (Rd, Rd,0xff ); +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Vf, Rd,0x80 );/* Vf = Rd == 0x80 */ +gen_ZNSf (Rd); + +return true; +} + +/* +* Subtracts one -1- from the contents of register Rd and places the result +* in the destination register Rd. The C Flag in SREG is not affected by the +* operation, thus allowing the DEC instruction to be used on a loop counter in +* multiple-precision computations. When operating on unsigned values, only +* BREQ and BRNE branches can be expected to perform consistently. When +* operating on two's complement values, all signed branches are available. +*/ +static bool trans_DEC (DisasContext *ctx,arg_DEC *a) +{ +TCGv Rd = cpu_r[a->rd]; + +tcg_gen_subi_tl (Rd, Rd,1 );/* Rd = Rd - 1 */ +tcg_gen_andi_tl (Rd, Rd,0xff );/* make it 8 bits */ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Vf, Rd,0x7f );/* Vf = Rd == 0x7f */ +gen_ZNSf (Rd); + +return true; +} + +/* +* This instruction performs 8-bit x 8-bit -> 16-bit unsigned multiplication. +*/ +static bool trans_MUL (DisasContext *ctx,arg_MUL *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_MUL )) { +return true; + } + +TCGv R0 = cpu_r[0 ]; +TCGv R1 = cpu_r[1 ]; +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_mul_tl (R , Rd, Rr);/* R = Rd * Rr */ +tcg_gen_andi_tl (R0 ,R ,0xff ); +tcg_gen_shri_tl (R1 ,R ,8 ); +tcg_gen_shri_tl (cpu_Cf,R ,15 );/* Cf = R(15) */ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ + +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* This instruction performs 8-bit x 8-bit -> 16-bit signed multiplication. +*/ +static bool trans_MULS (DisasContext *ctx,arg_MULS *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_MUL )) { +return true; + } + +TCGv R0 = cpu_r[0 ]; +TCGv R1 = cpu_r[1 ]; +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); +TCGv t0 =tcg_temp_new_i32 (); +TCGv t1 =tcg_temp_new_i32 (); + +tcg_gen_ext8s_tl (t0, Rd);/* make Rd full 32 bit signed */ +tcg_gen_ext8s_tl (t1, Rr);/* make Rr full 32 bit signed */ +tcg_gen_mul_tl (R , t0, t1);/* R = Rd * Rr */ +tcg_gen_andi_tl (R ,R ,0xffff );/* make it 16 bits */ +tcg_gen_andi_tl (R0 ,R ,0xff ); +tcg_gen_shri_tl (R1 ,R ,8 ); +tcg_gen_shri_tl (cpu_Cf,R ,15 );/* Cf = R(15) */ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ + +tcg_temp_free_i32 (t1); +tcg_temp_free_i32 (t0); +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* This instruction performs 8-bit x 8-bit -> 16-bit multiplication of a +* signed and an unsigned number. +*/ +static bool trans_MULSU (DisasContext *ctx,arg_MULSU *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_MUL )) { +return true; + } + +TCGv R0 = cpu_r[0 ]; +TCGv R1 = cpu_r[1 ]; +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); +TCGv t0 =tcg_temp_new_i32 (); + +tcg_gen_ext8s_tl (t0, Rd);/* make Rd full 32 bit signed */ +tcg_gen_mul_tl (R , t0, Rr);/* R = Rd * Rr */ +tcg_gen_andi_tl (R ,R ,0xffff );/* make R 16 bits */ +tcg_gen_andi_tl (R0 ,R ,0xff ); +tcg_gen_shri_tl (R1 ,R ,8 ); +tcg_gen_shri_tl (cpu_Cf,R ,15 );/* Cf = R(15) */ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ + +tcg_temp_free_i32 (t0); +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* This instruction performs 8-bit x 8-bit -> 16-bit unsigned +* multiplication and shifts the result one bit left. +*/ +static bool trans_FMUL (DisasContext *ctx,arg_FMUL *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_MUL )) { +return true; + } + +TCGv R0 = cpu_r[0 ]; +TCGv R1 = cpu_r[1 ]; +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_mul_tl (R , Rd, Rr);/* R = Rd * Rr */ +tcg_gen_shri_tl (cpu_Cf,R ,15 );/* Cf = R(15) */ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ +tcg_gen_shli_tl (R ,R ,1 ); +tcg_gen_andi_tl (R0 ,R ,0xff ); +tcg_gen_shri_tl (R1 ,R ,8 ); +tcg_gen_andi_tl (R1 ,R1 ,0xff ); + + +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* This instruction performs 8-bit x 8-bit -> 16-bit signed multiplication +* and shifts the result one bit left. +*/ +static bool trans_FMULS (DisasContext *ctx,arg_FMULS *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_MUL )) { +return true; + } + +TCGv R0 = cpu_r[0 ]; +TCGv R1 = cpu_r[1 ]; +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); +TCGv t0 =tcg_temp_new_i32 (); +TCGv t1 =tcg_temp_new_i32 (); + +tcg_gen_ext8s_tl (t0, Rd);/* make Rd full 32 bit signed */ +tcg_gen_ext8s_tl (t1, Rr);/* make Rr full 32 bit signed */ +tcg_gen_mul_tl (R , t0, t1);/* R = Rd * Rr */ +tcg_gen_andi_tl (R ,R ,0xffff );/* make it 16 bits */ +tcg_gen_shri_tl (cpu_Cf,R ,15 );/* Cf = R(15) */ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ +tcg_gen_shli_tl (R ,R ,1 ); +tcg_gen_andi_tl (R0 ,R ,0xff ); +tcg_gen_shri_tl (R1 ,R ,8 ); +tcg_gen_andi_tl (R1 ,R1 ,0xff ); + +tcg_temp_free_i32 (t1); +tcg_temp_free_i32 (t0); +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* This instruction performs 8-bit x 8-bit -> 16-bit signed multiplication +* and shifts the result one bit left. +*/ +static bool trans_FMULSU (DisasContext *ctx,arg_FMULSU *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_MUL )) { +return true; + } + +TCGv R0 = cpu_r[0 ]; +TCGv R1 = cpu_r[1 ]; +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); +TCGv t0 =tcg_temp_new_i32 (); + +tcg_gen_ext8s_tl (t0, Rd);/* make Rd full 32 bit signed */ +tcg_gen_mul_tl (R , t0, Rr);/* R = Rd * Rr */ +tcg_gen_andi_tl (R ,R ,0xffff );/* make it 16 bits */ +tcg_gen_shri_tl (cpu_Cf,R ,15 );/* Cf = R(15) */ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ +tcg_gen_shli_tl (R ,R ,1 ); +tcg_gen_andi_tl (R0 ,R ,0xff ); +tcg_gen_shri_tl (R1 ,R ,8 ); +tcg_gen_andi_tl (R1 ,R1 ,0xff ); + +tcg_temp_free_i32 (t0); +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* The module is an instruction set extension to the AVR CPU, performing +* DES iterations. The 64-bit data block (plaintext or ciphertext) is placed in +* the CPU register file, registers R0-R7, where LSB of data is placed in LSB +* of R0 and MSB of data is placed in MSB of R7. The full 64-bit key (including +* parity bits) is placed in registers R8- R15, organized in the register file +* with LSB of key in LSB of R8 and MSB of key in MSB of R15. Executing one DES +* instruction performs one round in the DES algorithm. Sixteen rounds must be +* executed in increasing order to form the correct DES ciphertext or +* plaintext. Intermediate results are stored in the register file (R0-R15) +* after each DES instruction. The instruction's operand (K) determines which +* round is executed, and the half carry flag (H) determines whether encryption +* or decryption is performed. The DES algorithm is described in +* "Specifications for the Data Encryption Standard" (Federal Information +* Processing Standards Publication 46). Intermediate results in this +* implementation differ from the standard because the initial permutation and +* the inverse initial permutation are performed each iteration. This does not +* affect the result in the final ciphertext or plaintext, but reduces +* execution time. +*/ +static bool trans_DES (DisasContext *ctx,arg_DES *a) +{ +/* TODO */ +if (!avr_have_feature (ctx,AVR_FEATURE_DES )) { +return true; + } + +return true; +}
Signature · 1 line
2.17.2 (Apple Git-113)
Re: [PATCH v39 05/22] target/avr: Add instruction translation - Arithmetic and Logic Instructions
Quoted 13 lines · Michael Rolnik
This includes:
- ADD, ADC, ADIW
- SBIW, SUB, SUBI, SBC, SBCI
- AND, ANDI
- OR, ORI, EOR
- COM, NEG
- INC, DEC
- MUL, MULS, MULSU
- FMUL, FMULS, FMULSU
- DES
...
+
target/avr/translate.c static bool avr_have_feature(DisasContext *ctx, int feature) · line 479
Quoted 13 lines
+/*
+ * Performs the logical AND between the contents of register Rd and register
+ * Rr and places the result in the destination register Rd.
+ */target/avr/translate.c +8
-0+static bool trans_AND (DisasContext *ctx,arg_AND *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_and_tl (R , Rd, Rr);/* Rd = Rd and Rr */ +tcg_gen_movi_tl (cpu_Vf,0 );/* Vf = 0 */
Hi, Michael.
Please add before this line a blank line and a comment:
/* update status register */
This is needed to visually separate core functionality and updating status register in trans_AND() function.
And please repeat that for all instructions that update status register.
Regards,
Aleksandar
PATCH v39 6/22 target/avr: Add instruction translation - Branch Instructions
In reply to Michael RolnikThis includes:
- RJMP, IJMP, EIJMP, JMP
- RCALL, ICALL, EICALL, CALL
- RET, RETI
- CPSE, CP, CPC, CPI
- SBRC, SBRS, SBIC, SBIS
- BRBC, BRBS
--- target/avr/translate.c | 530 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 530 insertions(+)
target/avr/translate.c +530 -0
@@ -855,3 +855,533 @@ static bool trans_DES(DisasContext *ctx, arg_DES *a)return true; } + +/* +* Branch Instructions +*/ +static void gen_jmp_ez (DisasContext *ctx) +{ +tcg_gen_deposit_tl (cpu_pc, cpu_r[30 ], cpu_r[31 ],8 ,8 ); +tcg_gen_or_tl (cpu_pc, cpu_pc, cpu_eind); + ctx->bstate =DISAS_LOOKUP ; +} + +static void gen_jmp_z (DisasContext *ctx) +{ +tcg_gen_deposit_tl (cpu_pc, cpu_r[30 ], cpu_r[31 ],8 ,8 ); + ctx->bstate =DISAS_LOOKUP ; +} + +static void gen_push_ret (DisasContext *ctx,int ret) +{ +if (avr_feature (ctx->env,AVR_FEATURE_1_BYTE_PC )) { + +TCGv t0 =tcg_const_i32 ((ret &0x0000ff )); + +tcg_gen_qemu_st_tl (t0, cpu_sp,MMU_DATA_IDX ,MO_UB ); +tcg_gen_subi_tl (cpu_sp, cpu_sp,1 ); + +tcg_temp_free_i32 (t0); + }else if (avr_feature (ctx->env,AVR_FEATURE_2_BYTE_PC )) { + +TCGv t0 =tcg_const_i32 ((ret &0x00ffff )); + +tcg_gen_subi_tl (cpu_sp, cpu_sp,1 ); +tcg_gen_qemu_st_tl (t0, cpu_sp,MMU_DATA_IDX ,MO_BEUW ); +tcg_gen_subi_tl (cpu_sp, cpu_sp,1 ); + +tcg_temp_free_i32 (t0); + + }else if (avr_feature (ctx->env,AVR_FEATURE_3_BYTE_PC )) { + +TCGv lo =tcg_const_i32 ((ret &0x0000ff )); +TCGv hi =tcg_const_i32 ((ret &0xffff00 ) >>8 ); + +tcg_gen_qemu_st_tl (lo, cpu_sp,MMU_DATA_IDX ,MO_UB ); +tcg_gen_subi_tl (cpu_sp, cpu_sp,2 ); +tcg_gen_qemu_st_tl (hi, cpu_sp,MMU_DATA_IDX ,MO_BEUW ); +tcg_gen_subi_tl (cpu_sp, cpu_sp,1 ); + +tcg_temp_free_i32 (lo); +tcg_temp_free_i32 (hi); + } +} + +static void gen_pop_ret (DisasContext *ctx,TCGv ret) +{ +if (avr_feature (ctx->env,AVR_FEATURE_1_BYTE_PC )) { +tcg_gen_addi_tl (cpu_sp, cpu_sp,1 ); +tcg_gen_qemu_ld_tl (ret, cpu_sp,MMU_DATA_IDX ,MO_UB ); + }else if (avr_feature (ctx->env,AVR_FEATURE_2_BYTE_PC )) { +tcg_gen_addi_tl (cpu_sp, cpu_sp,1 ); +tcg_gen_qemu_ld_tl (ret, cpu_sp,MMU_DATA_IDX ,MO_BEUW ); +tcg_gen_addi_tl (cpu_sp, cpu_sp,1 ); + }else if (avr_feature (ctx->env,AVR_FEATURE_3_BYTE_PC )) { +TCGv lo =tcg_temp_new_i32 (); +TCGv hi =tcg_temp_new_i32 (); + +tcg_gen_addi_tl (cpu_sp, cpu_sp,1 ); +tcg_gen_qemu_ld_tl (hi, cpu_sp,MMU_DATA_IDX ,MO_BEUW ); + +tcg_gen_addi_tl (cpu_sp, cpu_sp,2 ); +tcg_gen_qemu_ld_tl (lo, cpu_sp,MMU_DATA_IDX ,MO_UB ); + +tcg_gen_deposit_tl (ret, lo, hi,8 ,16 ); + +tcg_temp_free_i32 (lo); +tcg_temp_free_i32 (hi); + } +} + +static void gen_goto_tb (DisasContext *ctx,int n,target_ulong dest) +{ +TranslationBlock *tb = ctx->tb; + +if (ctx->singlestep ==0 ) { +tcg_gen_goto_tb (n); +tcg_gen_movi_i32 (cpu_pc, dest); +tcg_gen_exit_tb (tb, n); + }else { +tcg_gen_movi_i32 (cpu_pc, dest); +gen_helper_debug (cpu_env); +tcg_gen_exit_tb (NULL ,0 ); + } + ctx->bstate =DISAS_NORETURN ; +} + +/* +* Relative jump to an address within PC - 2K +1 and PC + 2K (words). For +* AVR microcontrollers with Program memory not exceeding 4K words (8KB) this +* instruction can address the entire memory from every address location. See +* also JMP. +*/ +static bool trans_RJMP (DisasContext *ctx,arg_RJMP *a) +{ +int dst = ctx->npc + a->imm; + +gen_goto_tb (ctx,0 , dst); + +return true; +} + +/* +* Indirect jump to the address pointed to by the Z (16 bits) Pointer +* Register in the Register File. The Z-pointer Register is 16 bits wide and +* allows jump within the lowest 64K words (128KB) section of Program memory. +* This instruction is not available in all devices. Refer to the device +* specific instruction set summary. +*/ +static bool trans_IJMP (DisasContext *ctx,arg_IJMP *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_IJMP_ICALL )) { +return true; + } + +gen_jmp_z (ctx); + +return true; +} + +/* +* Indirect jump to the address pointed to by the Z (16 bits) Pointer +* Register in the Register File and the EIND Register in the I/O space. This +* instruction allows for indirect jumps to the entire 4M (words) Program +* memory space. See also IJMP. This instruction is not available in all +* devices. Refer to the device specific instruction set summary. +*/ +static bool trans_EIJMP (DisasContext *ctx,arg_EIJMP *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_EIJMP_EICALL )) { +return true; + } + +gen_jmp_ez (ctx); +return true; +} + +/* +* Jump to an address within the entire 4M (words) Program memory. See also +* RJMP. This instruction is not available in all devices. Refer to the device +* specific instruction set summary.0 +*/ +static bool trans_JMP (DisasContext *ctx,arg_JMP *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_JMP_CALL )) { +return true; + } + +gen_goto_tb (ctx,0 , a->imm); + +return true; +} + +/* +* Relative call to an address within PC - 2K + 1 and PC + 2K (words). The +* return address (the instruction after the RCALL) is stored onto the Stack. +* See also CALL. For AVR microcontrollers with Program memory not exceeding 4K +* words (8KB) this instruction can address the entire memory from every +* address location. The Stack Pointer uses a post-decrement scheme during +* RCALL. +*/ +static bool trans_RCALL (DisasContext *ctx,arg_RCALL *a) +{ +int ret = ctx->npc; +int dst = ctx->npc + a->imm; + +gen_push_ret (ctx, ret); +gen_goto_tb (ctx,0 , dst); + +return true; +} + +/* +* Calls to a subroutine within the entire 4M (words) Program memory. The +* return address (to the instruction after the CALL) will be stored onto the +* Stack. See also RCALL. The Stack Pointer uses a post-decrement scheme during +* CALL. This instruction is not available in all devices. Refer to the device +* specific instruction set summary. +*/ +static bool trans_ICALL (DisasContext *ctx,arg_ICALL *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_IJMP_ICALL )) { +return true; + } + +int ret = ctx->npc; + +gen_push_ret (ctx, ret); +gen_jmp_z (ctx); + +return true; +} + +/* +* Indirect call of a subroutine pointed to by the Z (16 bits) Pointer +* Register in the Register File and the EIND Register in the I/O space. This +* instruction allows for indirect calls to the entire 4M (words) Program +* memory space. See also ICALL. The Stack Pointer uses a post-decrement scheme +* during EICALL. This instruction is not available in all devices. Refer to +* the device specific instruction set summary. +*/ +static bool trans_EICALL (DisasContext *ctx,arg_EICALL *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_EIJMP_EICALL )) { +return true; + } + +int ret = ctx->npc; + +gen_push_ret (ctx, ret); +gen_jmp_ez (ctx); +return true; +} + +/* +* Calls to a subroutine within the entire Program memory. The return +* address (to the instruction after the CALL) will be stored onto the Stack. +* (See also RCALL). The Stack Pointer uses a post-decrement scheme during +* CALL. This instruction is not available in all devices. Refer to the device +* specific instruction set summary. +*/ +static bool trans_CALL (DisasContext *ctx,arg_CALL *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_JMP_CALL )) { +return true; + } + +int Imm = a->imm; +int ret = ctx->npc; + +gen_push_ret (ctx, ret); +gen_goto_tb (ctx,0 , Imm); + +return true; +} + +/* +* Returns from subroutine. The return address is loaded from the STACK. +* The Stack Pointer uses a preincrement scheme during RET. +*/ +static bool trans_RET (DisasContext *ctx,arg_RET *a) +{ +gen_pop_ret (ctx, cpu_pc); + + ctx->bstate =DISAS_LOOKUP ; +return true; +} + +/* +* Returns from interrupt. The return address is loaded from the STACK and +* the Global Interrupt Flag is set. Note that the Status Register is not +* automatically stored when entering an interrupt routine, and it is not +* restored when returning from an interrupt routine. This must be handled by +* the application program. The Stack Pointer uses a pre-increment scheme +* during RETI. +*/ +static bool trans_RETI (DisasContext *ctx,arg_RETI *a) +{ +gen_pop_ret (ctx, cpu_pc); +tcg_gen_movi_tl (cpu_If,1 ); + +/* Need to return to main loop to re-evaluate interrupts. */ + ctx->bstate =DISAS_EXIT ; +return true; +} + +/* +* This instruction performs a compare between two registers Rd and Rr, and +* skips the next instruction if Rd = Rr. +*/ +static bool trans_CPSE (DisasContext *ctx,arg_CPSE *a) +{ + ctx->skip_cond =TCG_COND_EQ ; + ctx->skip_var0 = cpu_r[a->rd]; + ctx->skip_var1 = cpu_r[a->rr]; +return true; +} + +/* +* This instruction performs a compare between two registers Rd and Rr. +* None of the registers are changed. All conditional branches can be used +* after this instruction. +*/ +static bool trans_CP (DisasContext *ctx,arg_CP *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_sub_tl (R , Rd, Rr);/* R = Rd - Rr */ +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ + +gen_sub_CHf (R , Rd, Rr); +gen_sub_Vf (R , Rd, Rr); +gen_ZNSf (R ); + +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* This instruction performs a compare between two registers Rd and Rr and +* also takes into account the previous carry. None of the registers are +* changed. All conditional branches can be used after this instruction. +*/ +static bool trans_CPC (DisasContext *ctx,arg_CPC *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; +TCGv R =tcg_temp_new_i32 (); +TCGv zero =tcg_const_i32 (0 ); + +tcg_gen_sub_tl (R , Rd, Rr);/* R = Rd - Rr - Cf */ +tcg_gen_sub_tl (R ,R , cpu_Cf); +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ +gen_sub_CHf (R , Rd, Rr); +gen_sub_Vf (R , Rd, Rr); +gen_NSf (R ); + +/* +* Previous value remains unchanged when the result is zero; +* cleared otherwise. +*/ +tcg_gen_movcond_tl (TCG_COND_EQ , cpu_Zf,R , zero, cpu_Zf, zero); + +tcg_temp_free_i32 (zero); +tcg_temp_free_i32 (R ); + +return true; +} + +/* +* This instruction performs a compare between register Rd and a constant. +* The register is not changed. All conditional branches can be used after this +* instruction. +*/ +static bool trans_CPI (DisasContext *ctx,arg_CPI *a) +{ +TCGv Rd = cpu_r[a->rd]; +int Imm = a->imm; +TCGv Rr =tcg_const_i32 (Imm); +TCGv R =tcg_temp_new_i32 (); + +tcg_gen_sub_tl (R , Rd, Rr);/* R = Rd - Rr */ +tcg_gen_andi_tl (R ,R ,0xff );/* make it 8 bits */ +gen_sub_CHf (R , Rd, Rr); +gen_sub_Vf (R , Rd, Rr); +gen_ZNSf (R ); + +tcg_temp_free_i32 (R ); +tcg_temp_free_i32 (Rr); + +return true; +} + +/* +* This instruction tests a single bit in a register and skips the next +* instruction if the bit is cleared. +*/ +static bool trans_SBRC (DisasContext *ctx,arg_SBRC *a) +{ +TCGv Rr = cpu_r[a->rr]; + + ctx->skip_cond =TCG_COND_EQ ; + ctx->skip_var0 =tcg_temp_new (); + ctx->free_skip_var0 = true; + +tcg_gen_andi_tl (ctx->skip_var0, Rr,1 << a->bit); +return true; +} + +/* +* This instruction tests a single bit in a register and skips the next +* instruction if the bit is set. +*/ +static bool trans_SBRS (DisasContext *ctx,arg_SBRS *a) +{ +TCGv Rr = cpu_r[a->rr]; + + ctx->skip_cond =TCG_COND_NE ; + ctx->skip_var0 =tcg_temp_new (); + ctx->free_skip_var0 = true; + +tcg_gen_andi_tl (ctx->skip_var0, Rr,1 << a->bit); +return true; +} + +/* +* This instruction tests a single bit in an I/O Register and skips the +* next instruction if the bit is cleared. This instruction operates on the +* lower 32 I/O Registers -- addresses 0-31. +*/ +static bool trans_SBIC (DisasContext *ctx,arg_SBIC *a) +{ +TCGv temp =tcg_const_i32 (a->reg); + +gen_helper_inb (temp, cpu_env, temp); +tcg_gen_andi_tl (temp, temp,1 << a->bit); + ctx->skip_cond =TCG_COND_EQ ; + ctx->skip_var0 = temp; + ctx->free_skip_var0 = true; + +return true; +} + +/* +* This instruction tests a single bit in an I/O Register and skips the +* next instruction if the bit is set. This instruction operates on the lower +* 32 I/O Registers -- addresses 0-31. +*/ +static bool trans_SBIS (DisasContext *ctx,arg_SBIS *a) +{ +TCGv temp =tcg_const_i32 (a->reg); + +gen_helper_inb (temp, cpu_env, temp); +tcg_gen_andi_tl (temp, temp,1 << a->bit); + ctx->skip_cond =TCG_COND_NE ; + ctx->skip_var0 = temp; + ctx->free_skip_var0 = true; + +return true; +} + +/* +* Conditional relative branch. Tests a single bit in SREG and branches +* relatively to PC if the bit is cleared. This instruction branches relatively +* to PC in either direction (PC - 63 < = destination <= PC + 64). The +* parameter k is the offset from PC and is represented in two's complement +* form. +*/ +static bool trans_BRBC (DisasContext *ctx,arg_BRBC *a) +{ +TCGLabel *not_taken =gen_new_label (); + +TCGv var; + +switch (a->bit) { +case 0x00 : + var = cpu_Cf; +break ; +case 0x01 : + var = cpu_Zf; +break ; +case 0x02 : + var = cpu_Nf; +break ; +case 0x03 : + var = cpu_Vf; +break ; +case 0x04 : + var = cpu_Sf; +break ; +case 0x05 : + var = cpu_Hf; +break ; +case 0x06 : + var = cpu_Tf; +break ; +case 0x07 : + var = cpu_If; +break ; +default : +g_assert_not_reached (); + } + +tcg_gen_brcondi_i32 (TCG_COND_NE , var,0 , not_taken); +gen_goto_tb (ctx,0 , ctx->npc + a->imm); +gen_set_label (not_taken); + + ctx->bstate =DISAS_CHAIN ; +return true; +} + +/* +* Conditional relative branch. Tests a single bit in SREG and branches +* relatively to PC if the bit is set. This instruction branches relatively to +* PC in either direction (PC - 63 < = destination <= PC + 64). The parameter k +* is the offset from PC and is represented in two's complement form. +*/ +static bool trans_BRBS (DisasContext *ctx,arg_BRBS *a) +{ +TCGLabel *not_taken =gen_new_label (); + +TCGv var; + +switch (a->bit) { +case 0x00 : + var = cpu_Cf; +break ; +case 0x01 : + var = cpu_Zf; +break ; +case 0x02 : + var = cpu_Nf; +break ; +case 0x03 : + var = cpu_Vf; +break ; +case 0x04 : + var = cpu_Sf; +break ; +case 0x05 : + var = cpu_Hf; +break ; +case 0x06 : + var = cpu_Tf; +break ; +case 0x07 : + var = cpu_If; +break ; +default : +g_assert_not_reached (); + } + +tcg_gen_brcondi_i32 (TCG_COND_EQ , var,0 , not_taken); +gen_goto_tb (ctx,0 , ctx->npc + a->imm); +gen_set_label (not_taken); + + ctx->bstate =DISAS_CHAIN ; +return true; +} +
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 7/22 target/avr: Add instruction translation - Data Transfer Instructions
In reply to Michael RolnikThis includes:
- MOV, MOVW
- LDI, LDS LDX LDY LDZ
- LDDY, LDDZ
- STS, STX STY STZ
- STDY, STDZ
- LPM, LPMX
- ELPM, ELPMX
- SPM, SPMX
- IN, OUT
- PUSH, POP
- XCH
- LAS, LAC LAT
--- target/avr/translate.c | 986 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 986 insertions(+)
target/avr/translate.c +986 -0
@@ -1385,3 +1385,989 @@ static bool trans_BRBS(DisasContext *ctx, arg_BRBS *a)return true; } +/* +* Data Transfer Instructions +*/ + +/* +* in the gen_set_addr & gen_get_addr functions +* H assumed to be in 0x00ff0000 format +* M assumed to be in 0x000000ff format +* L assumed to be in 0x000000ff format +*/ +static void gen_set_addr (TCGv addr,TCGv H ,TCGv M ,TCGv L ) +{ + +tcg_gen_andi_tl (L , addr,0x000000ff ); + +tcg_gen_andi_tl (M , addr,0x0000ff00 ); +tcg_gen_shri_tl (M ,M ,8 ); + +tcg_gen_andi_tl (H , addr,0x00ff0000 ); +} + +static void gen_set_xaddr (TCGv addr) +{ +gen_set_addr (addr, cpu_rampX, cpu_r[27 ], cpu_r[26 ]); +} + +static void gen_set_yaddr (TCGv addr) +{ +gen_set_addr (addr, cpu_rampY, cpu_r[29 ], cpu_r[28 ]); +} + +static void gen_set_zaddr (TCGv addr) +{ +gen_set_addr (addr, cpu_rampZ, cpu_r[31 ], cpu_r[30 ]); +} + +static TCGv gen_get_addr (TCGv H ,TCGv M ,TCGv L ) +{ +TCGv addr =tcg_temp_new_i32 (); + +tcg_gen_deposit_tl (addr,M ,H ,8 ,8 ); +tcg_gen_deposit_tl (addr,L , addr,8 ,16 ); + +return addr; +} + +static TCGv gen_get_xaddr (void ) +{ +return gen_get_addr (cpu_rampX, cpu_r[27 ], cpu_r[26 ]); +} + +static TCGv gen_get_yaddr (void ) +{ +return gen_get_addr (cpu_rampY, cpu_r[29 ], cpu_r[28 ]); +} + +static TCGv gen_get_zaddr (void ) +{ +return gen_get_addr (cpu_rampZ, cpu_r[31 ], cpu_r[30 ]); +} + +/* +* Load one byte indirect from data space to register and stores an clear +* the bits in data space specified by the register. The instruction can only +* be used towards internal SRAM. The data location is pointed to by the Z (16 +* bits) Pointer Register in the Register File. Memory access is limited to the +* current data segment of 64KB. To access another data segment in devices with +* more than 64KB data space, the RAMPZ in register in the I/O area has to be +* changed. The Z-pointer Register is left unchanged by the operation. This +* instruction is especially suited for clearing status bits stored in SRAM. +*/ +static void gen_data_store (DisasContext *ctx,TCGv data,TCGv addr) +{ +if (ctx->tb->flags &TB_FLAGS_FULL_ACCESS ) { +gen_helper_fullwr (cpu_env, data, addr); + }else { +tcg_gen_qemu_st8 (data, addr,MMU_DATA_IDX );/* mem[addr] = data */ + } +} + +static void gen_data_load (DisasContext *ctx,TCGv data,TCGv addr) +{ +if (ctx->tb->flags &TB_FLAGS_FULL_ACCESS ) { +gen_helper_fullrd (data, cpu_env, addr); + }else { +tcg_gen_qemu_ld8u (data, addr,MMU_DATA_IDX );/* data = mem[addr] */ + } +} + +/* +* This instruction makes a copy of one register into another. The source +* register Rr is left unchanged, while the destination register Rd is loaded +* with a copy of Rr. +*/ +static bool trans_MOV (DisasContext *ctx,arg_MOV *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv Rr = cpu_r[a->rr]; + +tcg_gen_mov_tl (Rd, Rr); + +return true; +} + +/* +* This instruction makes a copy of one register pair into another register +* pair. The source register pair Rr+1:Rr is left unchanged, while the +* destination register pair Rd+1:Rd is loaded with a copy of Rr + 1:Rr. This +* instruction is not available in all devices. Refer to the device specific +* instruction set summary. +*/ +static bool trans_MOVW (DisasContext *ctx,arg_MOVW *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_MOVW )) { +return true; + } + +TCGv RdL = cpu_r[a->rd]; +TCGv RdH = cpu_r[a->rd +1 ]; +TCGv RrL = cpu_r[a->rr]; +TCGv RrH = cpu_r[a->rr +1 ]; + +tcg_gen_mov_tl (RdH, RrH); +tcg_gen_mov_tl (RdL, RrL); + +return true; +} + +/* +* Loads an 8 bit constant directly to register 16 to 31. +*/ +static bool trans_LDI (DisasContext *ctx,arg_LDI *a) +{ +TCGv Rd = cpu_r[a->rd]; +int imm = a->imm; + +tcg_gen_movi_tl (Rd, imm); + +return true; +} + +/* +* Loads one byte from the data space to a register. For parts with SRAM, +* the data space consists of the Register File, I/O memory and internal SRAM +* (and external SRAM if applicable). For parts without SRAM, the data space +* consists of the register file only. The EEPROM has a separate address space. +* A 16-bit address must be supplied. Memory access is limited to the current +* data segment of 64KB. The LDS instruction uses the RAMPD Register to access +* memory above 64KB. To access another data segment in devices with more than +* 64KB data space, the RAMPD in register in the I/O area has to be changed. +* This instruction is not available in all devices. Refer to the device +* specific instruction set summary. +*/ +static bool trans_LDS (DisasContext *ctx,arg_LDS *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =tcg_temp_new_i32 (); +TCGv H = cpu_rampD; + a->imm =next_word (ctx); + +tcg_gen_mov_tl (addr,H );/* addr = H:M:L */ +tcg_gen_shli_tl (addr, addr,16 ); +tcg_gen_ori_tl (addr, addr, a->imm); + +gen_data_load (ctx, Rd, addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Loads one byte indirect from the data space to a register. For parts +* with SRAM, the data space consists of the Register File, I/O memory and +* internal SRAM (and external SRAM if applicable). For parts without SRAM, the +* data space consists of the Register File only. In some parts the Flash +* Memory has been mapped to the data space and can be read using this command. +* The EEPROM has a separate address space. The data location is pointed to by +* the X (16 bits) Pointer Register in the Register File. Memory access is +* limited to the current data segment of 64KB. To access another data segment +* in devices with more than 64KB data space, the RAMPX in register in the I/O +* area has to be changed. The X-pointer Register can either be left unchanged +* by the operation, or it can be post-incremented or predecremented. These +* features are especially suited for accessing arrays, tables, and Stack +* Pointer usage of the X-pointer Register. Note that only the low byte of the +* X-pointer is updated in devices with no more than 256 bytes data space. For +* such devices, the high byte of the pointer is not used by this instruction +* and can be used for other purposes. The RAMPX Register in the I/O area is +* updated in parts with more than 64KB data space or more than 64KB Program +* memory, and the increment/decrement is added to the entire 24-bit address on +* such devices. Not all variants of this instruction is available in all +* devices. Refer to the device specific instruction set summary. In the +* Reduced Core tinyAVR the LD instruction can be used to achieve the same +* operation as LPM since the program memory is mapped to the data memory +* space. +*/ +static bool trans_LDX1 (DisasContext *ctx,arg_LDX1 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_xaddr (); + +gen_data_load (ctx, Rd, addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_LDX2 (DisasContext *ctx,arg_LDX2 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_xaddr (); + +gen_data_load (ctx, Rd, addr); +tcg_gen_addi_tl (addr, addr,1 );/* addr = addr + 1 */ + +gen_set_xaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_LDX3 (DisasContext *ctx,arg_LDX3 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_xaddr (); + +tcg_gen_subi_tl (addr, addr,1 );/* addr = addr - 1 */ +gen_data_load (ctx, Rd, addr); +gen_set_xaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Loads one byte indirect with or without displacement from the data space +* to a register. For parts with SRAM, the data space consists of the Register +* File, I/O memory and internal SRAM (and external SRAM if applicable). For +* parts without SRAM, the data space consists of the Register File only. In +* some parts the Flash Memory has been mapped to the data space and can be +* read using this command. The EEPROM has a separate address space. The data +* location is pointed to by the Y (16 bits) Pointer Register in the Register +* File. Memory access is limited to the current data segment of 64KB. To +* access another data segment in devices with more than 64KB data space, the +* RAMPY in register in the I/O area has to be changed. The Y-pointer Register +* can either be left unchanged by the operation, or it can be post-incremented +* or predecremented. These features are especially suited for accessing +* arrays, tables, and Stack Pointer usage of the Y-pointer Register. Note that +* only the low byte of the Y-pointer is updated in devices with no more than +* 256 bytes data space. For such devices, the high byte of the pointer is not +* used by this instruction and can be used for other purposes. The RAMPY +* Register in the I/O area is updated in parts with more than 64KB data space +* or more than 64KB Program memory, and the increment/decrement/displacement +* is added to the entire 24-bit address on such devices. Not all variants of +* this instruction is available in all devices. Refer to the device specific +* instruction set summary. In the Reduced Core tinyAVR the LD instruction can +* be used to achieve the same operation as LPM since the program memory is +* mapped to the data memory space. +*/ +static bool trans_LDY2 (DisasContext *ctx,arg_LDY2 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_yaddr (); + +gen_data_load (ctx, Rd, addr); +tcg_gen_addi_tl (addr, addr,1 );/* addr = addr + 1 */ + +gen_set_yaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_LDY3 (DisasContext *ctx,arg_LDY3 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_yaddr (); + +tcg_gen_subi_tl (addr, addr,1 );/* addr = addr - 1 */ +gen_data_load (ctx, Rd, addr); +gen_set_yaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_LDDY (DisasContext *ctx,arg_LDDY *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_yaddr (); + +tcg_gen_addi_tl (addr, addr, a->imm);/* addr = addr + q */ +gen_data_load (ctx, Rd, addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Loads one byte indirect with or without displacement from the data space +* to a register. For parts with SRAM, the data space consists of the Register +* File, I/O memory and internal SRAM (and external SRAM if applicable). For +* parts without SRAM, the data space consists of the Register File only. In +* some parts the Flash Memory has been mapped to the data space and can be +* read using this command. The EEPROM has a separate address space. The data +* location is pointed to by the Z (16 bits) Pointer Register in the Register +* File. Memory access is limited to the current data segment of 64KB. To +* access another data segment in devices with more than 64KB data space, the +* RAMPZ in register in the I/O area has to be changed. The Z-pointer Register +* can either be left unchanged by the operation, or it can be post-incremented +* or predecremented. These features are especially suited for Stack Pointer +* usage of the Z-pointer Register, however because the Z-pointer Register can +* be used for indirect subroutine calls, indirect jumps and table lookup, it +* is often more convenient to use the X or Y-pointer as a dedicated Stack +* Pointer. Note that only the low byte of the Z-pointer is updated in devices +* with no more than 256 bytes data space. For such devices, the high byte of +* the pointer is not used by this instruction and can be used for other +* purposes. The RAMPZ Register in the I/O area is updated in parts with more +* than 64KB data space or more than 64KB Program memory, and the +* increment/decrement/displacement is added to the entire 24-bit address on +* such devices. Not all variants of this instruction is available in all +* devices. Refer to the device specific instruction set summary. In the +* Reduced Core tinyAVR the LD instruction can be used to achieve the same +* operation as LPM since the program memory is mapped to the data memory +* space. For using the Z-pointer for table lookup in Program memory see the +* LPM and ELPM instructions. +*/ +static bool trans_LDZ2 (DisasContext *ctx,arg_LDZ2 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); + +gen_data_load (ctx, Rd, addr); +tcg_gen_addi_tl (addr, addr,1 );/* addr = addr + 1 */ + +gen_set_zaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_LDZ3 (DisasContext *ctx,arg_LDZ3 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); + +tcg_gen_subi_tl (addr, addr,1 );/* addr = addr - 1 */ +gen_data_load (ctx, Rd, addr); + +gen_set_zaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_LDDZ (DisasContext *ctx,arg_LDDZ *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); + +tcg_gen_addi_tl (addr, addr, a->imm);/* addr = addr + q */ +gen_data_load (ctx, Rd, addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Stores one byte from a Register to the data space. For parts with SRAM, +* the data space consists of the Register File, I/O memory and internal SRAM +* (and external SRAM if applicable). For parts without SRAM, the data space +* consists of the Register File only. The EEPROM has a separate address space. +* A 16-bit address must be supplied. Memory access is limited to the current +* data segment of 64KB. The STS instruction uses the RAMPD Register to access +* memory above 64KB. To access another data segment in devices with more than +* 64KB data space, the RAMPD in register in the I/O area has to be changed. +* This instruction is not available in all devices. Refer to the device +* specific instruction set summary. +*/ +static bool trans_STS (DisasContext *ctx,arg_STS *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =tcg_temp_new_i32 (); +TCGv H = cpu_rampD; + a->imm =next_word (ctx); + +tcg_gen_mov_tl (addr,H );/* addr = H:M:L */ +tcg_gen_shli_tl (addr, addr,16 ); +tcg_gen_ori_tl (addr, addr, a->imm); +gen_data_store (ctx, Rd, addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Stores one byte indirect from a register to data space. For parts with SRAM, +* the data space consists of the Register File, I/O memory, and internal SRAM +* (and external SRAM if applicable). For parts without SRAM, the data space +* consists of the Register File only. The EEPROM has a separate address space. +* +* The data location is pointed to by the X (16 bits) Pointer Register in the +* Register File. Memory access is limited to the current data segment of 64KB. +* To access another data segment in devices with more than 64KB data space, the +* RAMPX in register in the I/O area has to be changed. +* +* The X-pointer Register can either be left unchanged by the operation, or it +* can be post-incremented or pre-decremented. These features are especially +* suited for accessing arrays, tables, and Stack Pointer usage of the +* X-pointer Register. Note that only the low byte of the X-pointer is updated +* in devices with no more than 256 bytes data space. For such devices, the high +* byte of the pointer is not used by this instruction and can be used for other +* purposes. The RAMPX Register in the I/O area is updated in parts with more +* than 64KB data space or more than 64KB Program memory, and the increment / +* decrement is added to the entire 24-bit address on such devices. +*/ +static bool trans_STX1 (DisasContext *ctx,arg_STX1 *a) +{ +TCGv Rd = cpu_r[a->rr]; +TCGv addr =gen_get_xaddr (); + +gen_data_store (ctx, Rd, addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_STX2 (DisasContext *ctx,arg_STX2 *a) +{ +TCGv Rd = cpu_r[a->rr]; +TCGv addr =gen_get_xaddr (); + +gen_data_store (ctx, Rd, addr); +tcg_gen_addi_tl (addr, addr,1 );/* addr = addr + 1 */ +gen_set_xaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_STX3 (DisasContext *ctx,arg_STX3 *a) +{ +TCGv Rd = cpu_r[a->rr]; +TCGv addr =gen_get_xaddr (); + +tcg_gen_subi_tl (addr, addr,1 );/* addr = addr - 1 */ +gen_data_store (ctx, Rd, addr); +gen_set_xaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Stores one byte indirect with or without displacement from a register to data +* space. For parts with SRAM, the data space consists of the Register File, I/O +* memory, and internal SRAM (and external SRAM if applicable). For parts +* without SRAM, the data space consists of the Register File only. The EEPROM +* has a separate address space. +* +* The data location is pointed to by the Y (16 bits) Pointer Register in the +* Register File. Memory access is limited to the current data segment of 64KB. +* To access another data segment in devices with more than 64KB data space, the +* RAMPY in register in the I/O area has to be changed. +* +* The Y-pointer Register can either be left unchanged by the operation, or it +* can be post-incremented or pre-decremented. These features are especially +* suited for accessing arrays, tables, and Stack Pointer usage of the Y-pointer +* Register. Note that only the low byte of the Y-pointer is updated in devices +* with no more than 256 bytes data space. For such devices, the high byte of +* the pointer is not used by this instruction and can be used for other +* purposes. The RAMPY Register in the I/O area is updated in parts with more +* than 64KB data space or more than 64KB Program memory, and the increment / +* decrement / displacement is added to the entire 24-bit address on such +* devices. +*/ +static bool trans_STY2 (DisasContext *ctx,arg_STY2 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_yaddr (); + +gen_data_store (ctx, Rd, addr); +tcg_gen_addi_tl (addr, addr,1 );/* addr = addr + 1 */ +gen_set_yaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_STY3 (DisasContext *ctx,arg_STY3 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_yaddr (); + +tcg_gen_subi_tl (addr, addr,1 );/* addr = addr - 1 */ +gen_data_store (ctx, Rd, addr); +gen_set_yaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_STDY (DisasContext *ctx,arg_STDY *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_yaddr (); + +tcg_gen_addi_tl (addr, addr, a->imm);/* addr = addr + q */ +gen_data_store (ctx, Rd, addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Stores one byte indirect with or without displacement from a register to data +* space. For parts with SRAM, the data space consists of the Register File, I/O +* memory, and internal SRAM (and external SRAM if applicable). For parts +* without SRAM, the data space consists of the Register File only. The EEPROM +* has a separate address space. +* +* The data location is pointed to by the Y (16 bits) Pointer Register in the +* Register File. Memory access is limited to the current data segment of 64KB. +* To access another data segment in devices with more than 64KB data space, the +* RAMPY in register in the I/O area has to be changed. +* +* The Y-pointer Register can either be left unchanged by the operation, or it +* can be post-incremented or pre-decremented. These features are especially +* suited for accessing arrays, tables, and Stack Pointer usage of the Y-pointer +* Register. Note that only the low byte of the Y-pointer is updated in devices +* with no more than 256 bytes data space. For such devices, the high byte of +* the pointer is not used by this instruction and can be used for other +* purposes. The RAMPY Register in the I/O area is updated in parts with more +* than 64KB data space or more than 64KB Program memory, and the increment / +* decrement / displacement is added to the entire 24-bit address on such +* devices. +*/ +static bool trans_STZ2 (DisasContext *ctx,arg_STZ2 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); + +gen_data_store (ctx, Rd, addr); +tcg_gen_addi_tl (addr, addr,1 );/* addr = addr + 1 */ + +gen_set_zaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_STZ3 (DisasContext *ctx,arg_STZ3 *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); + +tcg_gen_subi_tl (addr, addr,1 );/* addr = addr - 1 */ +gen_data_store (ctx, Rd, addr); + +gen_set_zaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_STDZ (DisasContext *ctx,arg_STDZ *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); + +tcg_gen_addi_tl (addr, addr, a->imm);/* addr = addr + q */ +gen_data_store (ctx, Rd, addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Loads one byte pointed to by the Z-register into the destination +* register Rd. This instruction features a 100% space effective constant +* initialization or constant data fetch. The Program memory is organized in +* 16-bit words while the Z-pointer is a byte address. Thus, the least +* significant bit of the Z-pointer selects either low byte (ZLSB = 0) or high +* byte (ZLSB = 1). This instruction can address the first 64KB (32K words) of +* Program memory. The Zpointer Register can either be left unchanged by the +* operation, or it can be incremented. The incrementation does not apply to +* the RAMPZ Register. +* +* Devices with Self-Programming capability can use the LPM instruction to read +* the Fuse and Lock bit values. +*/ +static bool trans_LPM1 (DisasContext *ctx,arg_LPM1 *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_LPM )) { +return true; + } + +TCGv Rd = cpu_r[0 ]; +TCGv addr =tcg_temp_new_i32 (); +TCGv H = cpu_r[31 ]; +TCGv L = cpu_r[30 ]; + +tcg_gen_shli_tl (addr,H ,8 );/* addr = H:L */ +tcg_gen_or_tl (addr, addr,L ); +tcg_gen_qemu_ld8u (Rd, addr,MMU_CODE_IDX );/* Rd = mem[addr] */ + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_LPM2 (DisasContext *ctx,arg_LPM2 *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_LPM )) { +return true; + } + +TCGv Rd = cpu_r[a->rd]; +TCGv addr =tcg_temp_new_i32 (); +TCGv H = cpu_r[31 ]; +TCGv L = cpu_r[30 ]; + +tcg_gen_shli_tl (addr,H ,8 );/* addr = H:L */ +tcg_gen_or_tl (addr, addr,L ); +tcg_gen_qemu_ld8u (Rd, addr,MMU_CODE_IDX );/* Rd = mem[addr] */ + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_LPMX (DisasContext *ctx,arg_LPMX *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_LPMX )) { +return true; + } + +TCGv Rd = cpu_r[a->rd]; +TCGv addr =tcg_temp_new_i32 (); +TCGv H = cpu_r[31 ]; +TCGv L = cpu_r[30 ]; + +tcg_gen_shli_tl (addr,H ,8 );/* addr = H:L */ +tcg_gen_or_tl (addr, addr,L ); +tcg_gen_qemu_ld8u (Rd, addr,MMU_CODE_IDX );/* Rd = mem[addr] */ +tcg_gen_addi_tl (addr, addr,1 );/* addr = addr + 1 */ +tcg_gen_andi_tl (L , addr,0xff ); +tcg_gen_shri_tl (addr, addr,8 ); +tcg_gen_andi_tl (H , addr,0xff ); + +tcg_temp_free_i32 (addr); + +return true; +} + + +/* +* Loads one byte pointed to by the Z-register and the RAMPZ Register in +* the I/O space, and places this byte in the destination register Rd. This +* instruction features a 100% space effective constant initialization or +* constant data fetch. The Program memory is organized in 16-bit words while +* the Z-pointer is a byte address. Thus, the least significant bit of the +* Z-pointer selects either low byte (ZLSB = 0) or high byte (ZLSB = 1). This +* instruction can address the entire Program memory space. The Z-pointer +* Register can either be left unchanged by the operation, or it can be +* incremented. The incrementation applies to the entire 24-bit concatenation +* of the RAMPZ and Z-pointer Registers. +* +* Devices with Self-Programming capability can use the ELPM instruction to +* read the Fuse and Lock bit value. +*/ +static bool trans_ELPM1 (DisasContext *ctx,arg_ELPM1 *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_ELPM )) { +return true; + } + +TCGv Rd = cpu_r[0 ]; +TCGv addr =gen_get_zaddr (); + +tcg_gen_qemu_ld8u (Rd, addr,MMU_CODE_IDX );/* Rd = mem[addr] */ + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_ELPM2 (DisasContext *ctx,arg_ELPM2 *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_ELPM )) { +return true; + } + +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); + +tcg_gen_qemu_ld8u (Rd, addr,MMU_CODE_IDX );/* Rd = mem[addr] */ + +tcg_temp_free_i32 (addr); + +return true; +} + +static bool trans_ELPMX (DisasContext *ctx,arg_ELPMX *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_ELPMX )) { +return true; + } + +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); + +tcg_gen_qemu_ld8u (Rd, addr,MMU_CODE_IDX );/* Rd = mem[addr] */ +tcg_gen_addi_tl (addr, addr,1 );/* addr = addr + 1 */ +gen_set_zaddr (addr); + +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* SPM can be used to erase a page in the Program memory, to write a page +* in the Program memory (that is already erased), and to set Boot Loader Lock +* bits. In some devices, the Program memory can be written one word at a time, +* in other devices an entire page can be programmed simultaneously after first +* filling a temporary page buffer. In all cases, the Program memory must be +* erased one page at a time. When erasing the Program memory, the RAMPZ and +* Z-register are used as page address. When writing the Program memory, the +* RAMPZ and Z-register are used as page or word address, and the R1:R0 +* register pair is used as data(1). When setting the Boot Loader Lock bits, +* the R1:R0 register pair is used as data. Refer to the device documentation +* for detailed description of SPM usage. This instruction can address the +* entire Program memory. +* +* The SPM instruction is not available in all devices. Refer to the device +* specific instruction set summary. +* +* Note: 1. R1 determines the instruction high byte, and R0 determines the +* instruction low byte. +*/ +static bool trans_SPM (DisasContext *ctx,arg_SPM *a) +{ +/* TODO */ +if (!avr_have_feature (ctx,AVR_FEATURE_SPM )) { +return true; + } + +return true; +} + +static bool trans_SPMX (DisasContext *ctx,arg_SPMX *a) +{ +/* TODO */ +if (!avr_have_feature (ctx,AVR_FEATURE_SPMX )) { +return true; + } + +return true; +} + +/* +* Loads data from the I/O Space (Ports, Timers, Configuration Registers, +* etc.) into register Rd in the Register File. +*/ +static bool trans_IN (DisasContext *ctx,arg_IN *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv port =tcg_const_i32 (a->imm); + +gen_helper_inb (Rd, cpu_env, port); + +tcg_temp_free_i32 (port); + +return true; +} + +/* +* Stores data from register Rr in the Register File to I/O Space (Ports, +* Timers, Configuration Registers, etc.). +*/ +static bool trans_OUT (DisasContext *ctx,arg_OUT *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv port =tcg_const_i32 (a->imm); + +gen_helper_outb (cpu_env, port, Rd); + +tcg_temp_free_i32 (port); + +return true; +} + +/* +* This instruction stores the contents of register Rr on the STACK. The +* Stack Pointer is post-decremented by 1 after the PUSH. This instruction is +* not available in all devices. Refer to the device specific instruction set +* summary. +*/ +static bool trans_PUSH (DisasContext *ctx,arg_PUSH *a) +{ +TCGv Rd = cpu_r[a->rd]; + +gen_data_store (ctx, Rd, cpu_sp); +tcg_gen_subi_tl (cpu_sp, cpu_sp,1 ); + +return true; +} + +/* +* This instruction loads register Rd with a byte from the STACK. The Stack +* Pointer is pre-incremented by 1 before the POP. This instruction is not +* available in all devices. Refer to the device specific instruction set +* summary. +*/ +static bool trans_POP (DisasContext *ctx,arg_POP *a) +{ +/* +* Using a temp to work around some strange behaviour: +* tcg_gen_addi_tl(cpu_sp, cpu_sp, 1); +* gen_data_load(ctx, Rd, cpu_sp); +* seems to cause the add to happen twice. +* This doesn't happen if either the add or the load is removed. +*/ +TCGv t1 =tcg_temp_new_i32 (); +TCGv Rd = cpu_r[a->rd]; + +tcg_gen_addi_tl (t1, cpu_sp,1 ); +gen_data_load (ctx, Rd, t1); +tcg_gen_mov_tl (cpu_sp, t1); + +return true; +} + +/* +* Exchanges one byte indirect between register and data space. The data +* location is pointed to by the Z (16 bits) Pointer Register in the Register +* File. Memory access is limited to the current data segment of 64KB. To +* access another data segment in devices with more than 64KB data space, the +* RAMPZ in register in the I/O area has to be changed. +* +* The Z-pointer Register is left unchanged by the operation. This instruction +* is especially suited for writing/reading status bits stored in SRAM. +*/ +static bool trans_XCH (DisasContext *ctx,arg_XCH *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_RMW )) { +return true; + } + +TCGv Rd = cpu_r[a->rd]; +TCGv t0 =tcg_temp_new_i32 (); +TCGv addr =gen_get_zaddr (); + +gen_data_load (ctx, t0, addr); +gen_data_store (ctx, Rd, addr); +tcg_gen_mov_tl (Rd, t0); + +tcg_temp_free_i32 (t0); +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Load one byte indirect from data space to register and set bits in data +* space specified by the register. The instruction can only be used towards +* internal SRAM. The data location is pointed to by the Z (16 bits) Pointer +* Register in the Register File. Memory access is limited to the current data +* segment of 64KB. To access another data segment in devices with more than +* 64KB data space, the RAMPZ in register in the I/O area has to be changed. +* +* The Z-pointer Register is left unchanged by the operation. This instruction +* is especially suited for setting status bits stored in SRAM. +*/ +static bool trans_LAS (DisasContext *ctx,arg_LAS *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_RMW )) { +return true; + } + +TCGv Rr = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); +TCGv t0 =tcg_temp_new_i32 (); +TCGv t1 =tcg_temp_new_i32 (); + +gen_data_load (ctx, t0, addr);/* t0 = mem[addr] */ +tcg_gen_or_tl (t1, t0, Rr); +tcg_gen_mov_tl (Rr, t0);/* Rr = t0 */ +gen_data_store (ctx, t1, addr);/* mem[addr] = t1 */ + +tcg_temp_free_i32 (t1); +tcg_temp_free_i32 (t0); +tcg_temp_free_i32 (addr); + +return true; +} + +/* +* Load one byte indirect from data space to register and stores and clear +* the bits in data space specified by the register. The instruction can +* only be used towards internal SRAM. The data location is pointed to by +* the Z (16 bits) Pointer Register in the Register File. Memory access is +* limited to the current data segment of 64KB. To access another data +* segment in devices with more than 64KB data space, the RAMPZ in register +* in the I/O area has to be changed. +* +* The Z-pointer Register is left unchanged by the operation. This instruction +* is especially suited for clearing status bits stored in SRAM. +*/ +static bool trans_LAC (DisasContext *ctx,arg_LAC *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_RMW )) { +return true; + } + +TCGv Rr = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); +TCGv t0 =tcg_temp_new_i32 (); +TCGv t1 =tcg_temp_new_i32 (); + +gen_data_load (ctx, t0, addr);/* t0 = mem[addr] */ +tcg_gen_andc_tl (t1, t0, Rr);/* t1 = t0 & (0xff - Rr) = t0 & ~Rr */ +tcg_gen_mov_tl (Rr, t0);/* Rr = t0 */ +gen_data_store (ctx, t1, addr);/* mem[addr] = t1 */ + +tcg_temp_free_i32 (t1); +tcg_temp_free_i32 (t0); +tcg_temp_free_i32 (addr); + +return true; +} + + +/* +* Load one byte indirect from data space to register and toggles bits in +* the data space specified by the register. The instruction can only be used +* towards SRAM. The data location is pointed to by the Z (16 bits) Pointer +* Register in the Register File. Memory access is limited to the current data +* segment of 64KB. To access another data segment in devices with more than +* 64KB data space, the RAMPZ in register in the I/O area has to be changed. +* +* The Z-pointer Register is left unchanged by the operation. This instruction +* is especially suited for changing status bits stored in SRAM. +*/ +static bool trans_LAT (DisasContext *ctx,arg_LAT *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_RMW )) { +return true; + } + +TCGv Rd = cpu_r[a->rd]; +TCGv addr =gen_get_zaddr (); +TCGv t0 =tcg_temp_new_i32 (); +TCGv t1 =tcg_temp_new_i32 (); + +gen_data_load (ctx, t0, addr);/* t0 = mem[addr] */ +tcg_gen_xor_tl (t1, t0, Rd); +tcg_gen_mov_tl (Rd, t0);/* Rd = t0 */ +gen_data_store (ctx, t1, addr);/* mem[addr] = t1 */ + +tcg_temp_free_i32 (t1); +tcg_temp_free_i32 (t0); +tcg_temp_free_i32 (addr); + +return true; +}
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 8/22 target/avr: Add instruction translation - Bit and Bit-test Instructions
In reply to Michael RolnikThis includes:
- LSR, ROR
- ASR
- SWAP
- SBI, CBI
- BST, BLD
- BSET, BCLR
--- target/avr/translate.c | 235 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 235 insertions(+)
target/avr/translate.c +235 -0
@@ -2371,3 +2371,238 @@ static bool trans_LAT(DisasContext *ctx, arg_LAT *a)return true; } + +/* +* Bit and Bit-test Instructions +*/ +static void gen_rshift_ZNVSf (TCGv R ) +{ +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf,R ,0 );/* Zf = R == 0 */ +tcg_gen_shri_tl (cpu_Nf,R ,7 );/* Nf = R(7) */ +tcg_gen_xor_tl (cpu_Vf, cpu_Nf, cpu_Cf); +tcg_gen_xor_tl (cpu_Sf, cpu_Nf, cpu_Vf);/* Sf = Nf ^ Vf */ +} + +/* +* Shifts all bits in Rd one place to the right. Bit 7 is cleared. Bit 0 is +* loaded into the C Flag of the SREG. This operation effectively divides an +* unsigned value by two. The C Flag can be used to round the result. +*/ +static bool trans_LSR (DisasContext *ctx,arg_LSR *a) +{ +TCGv Rd = cpu_r[a->rd]; + +tcg_gen_andi_tl (cpu_Cf, Rd,1 ); +tcg_gen_shri_tl (Rd, Rd,1 ); +tcg_gen_setcondi_tl (TCG_COND_EQ , cpu_Zf, Rd,0 );/* Zf = Rd == 0 */ +tcg_gen_movi_tl (cpu_Nf,0 ); +tcg_gen_mov_tl (cpu_Vf, cpu_Cf); +tcg_gen_mov_tl (cpu_Sf, cpu_Vf); + +return true; +} + +/* +* Shifts all bits in Rd one place to the right. The C Flag is shifted into +* bit 7 of Rd. Bit 0 is shifted into the C Flag. This operation, combined +* with ASR, effectively divides multi-byte signed values by two. Combined with +* LSR it effectively divides multi-byte unsigned values by two. The Carry Flag +* can be used to round the result. +*/ +static bool trans_ROR (DisasContext *ctx,arg_ROR *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv t0 =tcg_temp_new_i32 (); + +tcg_gen_shli_tl (t0, cpu_Cf,7 ); +tcg_gen_andi_tl (cpu_Cf, Rd,1 ); +tcg_gen_shri_tl (Rd, Rd,1 ); +tcg_gen_or_tl (Rd, Rd, t0); +gen_rshift_ZNVSf (Rd); + +tcg_temp_free_i32 (t0); + +return true; +} + +/* +* Shifts all bits in Rd one place to the right. Bit 7 is held constant. Bit 0 +* is loaded into the C Flag of the SREG. This operation effectively divides a +* signed value by two without changing its sign. The Carry Flag can be used to +* round the result. +*/ +static bool trans_ASR (DisasContext *ctx,arg_ASR *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv t0 =tcg_temp_new_i32 (); + +tcg_gen_andi_tl (cpu_Cf, Rd,1 );/* Cf = Rd(0) */ +tcg_gen_andi_tl (t0, Rd,0x80 );/* Rd = (Rd & 0x80) | (Rd >> 1) */ +tcg_gen_shri_tl (Rd, Rd,1 ); +tcg_gen_or_tl (Rd, Rd, t0); + +gen_rshift_ZNVSf (Rd); + +tcg_temp_free_i32 (t0); + +return true; +} + +/* +* Swaps high and low nibbles in a register. +*/ +static bool trans_SWAP (DisasContext *ctx,arg_SWAP *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv t0 =tcg_temp_new_i32 (); +TCGv t1 =tcg_temp_new_i32 (); + +tcg_gen_andi_tl (t0, Rd,0x0f ); +tcg_gen_shli_tl (t0, t0,4 ); +tcg_gen_andi_tl (t1, Rd,0xf0 ); +tcg_gen_shri_tl (t1, t1,4 ); +tcg_gen_or_tl (Rd, t0, t1); + +tcg_temp_free_i32 (t1); +tcg_temp_free_i32 (t0); + +return true; +} + +/* +* Sets a specified bit in an I/O Register. This instruction operates on +* the lower 32 I/O Registers -- addresses 0-31. +*/ +static bool trans_SBI (DisasContext *ctx,arg_SBI *a) +{ +TCGv data =tcg_temp_new_i32 (); +TCGv port =tcg_const_i32 (a->reg); + +gen_helper_inb (data, cpu_env, port); +tcg_gen_ori_tl (data, data,1 << a->bit); +gen_helper_outb (cpu_env, port, data); + +tcg_temp_free_i32 (port); +tcg_temp_free_i32 (data); + +return true; +} + +/* +* Clears a specified bit in an I/O Register. This instruction operates on +* the lower 32 I/O Registers -- addresses 0-31. +*/ +static bool trans_CBI (DisasContext *ctx,arg_CBI *a) +{ +TCGv data =tcg_temp_new_i32 (); +TCGv port =tcg_const_i32 (a->reg); + +gen_helper_inb (data, cpu_env, port); +tcg_gen_andi_tl (data, data, ~(1 << a->bit)); +gen_helper_outb (cpu_env, port, data); + +tcg_temp_free_i32 (data); +tcg_temp_free_i32 (port); + +return true; +} + +/* +* Stores bit b from Rd to the T Flag in SREG (Status Register). +*/ +static bool trans_BST (DisasContext *ctx,arg_BST *a) +{ +TCGv Rd = cpu_r[a->rd]; + +tcg_gen_andi_tl (cpu_Tf, Rd,1 << a->bit); +tcg_gen_shri_tl (cpu_Tf, cpu_Tf, a->bit); + +return true; +} + +/* +* Copies the T Flag in the SREG (Status Register) to bit b in register Rd. +*/ +static bool trans_BLD (DisasContext *ctx,arg_BLD *a) +{ +TCGv Rd = cpu_r[a->rd]; +TCGv t1 =tcg_temp_new_i32 (); + +tcg_gen_andi_tl (Rd, Rd, ~(1u << a->bit));/* clear bit */ +tcg_gen_shli_tl (t1, cpu_Tf, a->bit);/* create mask */ +tcg_gen_or_tl (Rd, Rd, t1); + +tcg_temp_free_i32 (t1); + +return true; +} + +/* +* Sets a single Flag or bit in SREG. +*/ +static bool trans_BSET (DisasContext *ctx,arg_BSET *a) +{ +switch (a->bit) { +case 0x00 : +tcg_gen_movi_tl (cpu_Cf,0x01 ); +break ; +case 0x01 : +tcg_gen_movi_tl (cpu_Zf,0x01 ); +break ; +case 0x02 : +tcg_gen_movi_tl (cpu_Nf,0x01 ); +break ; +case 0x03 : +tcg_gen_movi_tl (cpu_Vf,0x01 ); +break ; +case 0x04 : +tcg_gen_movi_tl (cpu_Sf,0x01 ); +break ; +case 0x05 : +tcg_gen_movi_tl (cpu_Hf,0x01 ); +break ; +case 0x06 : +tcg_gen_movi_tl (cpu_Tf,0x01 ); +break ; +case 0x07 : +tcg_gen_movi_tl (cpu_If,0x01 ); +break ; + } + +return true; +} + +/* +* Clears a single Flag in SREG. +*/ +static bool trans_BCLR (DisasContext *ctx,arg_BCLR *a) +{ +switch (a->bit) { +case 0x00 : +tcg_gen_movi_tl (cpu_Cf,0x00 ); +break ; +case 0x01 : +tcg_gen_movi_tl (cpu_Zf,0x00 ); +break ; +case 0x02 : +tcg_gen_movi_tl (cpu_Nf,0x00 ); +break ; +case 0x03 : +tcg_gen_movi_tl (cpu_Vf,0x00 ); +break ; +case 0x04 : +tcg_gen_movi_tl (cpu_Sf,0x00 ); +break ; +case 0x05 : +tcg_gen_movi_tl (cpu_Hf,0x00 ); +break ; +case 0x06 : +tcg_gen_movi_tl (cpu_Tf,0x00 ); +break ; +case 0x07 : +tcg_gen_movi_tl (cpu_If,0x00 ); +break ; + } + +return true; +}
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 9/22 target/avr: Add instruction translation - MCU Control Instructions
In reply to Michael RolnikThis includes:
- BREAK
- NOP
- SLEEP
- WDR
--- target/avr/translate.c | 68 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+)
target/avr/translate.c +68 -0
@@ -2606,3 +2606,71 @@ static bool trans_BCLR(DisasContext *ctx, arg_BCLR *a)return true; } + +/* +* MCU Control Instructions +*/ + +/* +* The BREAK instruction is used by the On-chip Debug system, and is +* normally not used in the application software. When the BREAK instruction is +* executed, the AVR CPU is set in the Stopped Mode. This gives the On-chip +* Debugger access to internal resources. If any Lock bits are set, or either +* the JTAGEN or OCDEN Fuses are unprogrammed, the CPU will treat the BREAK +* instruction as a NOP and will not enter the Stopped mode. This instruction +* is not available in all devices. Refer to the device specific instruction +* set summary. +*/ +static bool trans_BREAK (DisasContext *ctx,arg_BREAK *a) +{ +if (!avr_have_feature (ctx,AVR_FEATURE_BREAK )) { +return true; + } + +#ifdef BREAKPOINT_ON_BREAK +tcg_gen_movi_tl (cpu_pc, ctx->npc -1 ); +gen_helper_debug (cpu_env); + ctx->bstate =DISAS_EXIT ; +#else +/* NOP */ +#endif + +return true; +} + + +/* +* This instruction performs a single cycle No Operation. +*/ +static bool trans_NOP (DisasContext *ctx,arg_NOP *a) +{ + +/* NOP */ + +return true; +} + + +/* +* This instruction sets the circuit in sleep mode defined by the MCU +* Control Register. +*/ +static bool trans_SLEEP (DisasContext *ctx,arg_SLEEP *a) +{ +gen_helper_sleep (cpu_env); + ctx->bstate =DISAS_NORETURN ; +return true; +} + + +/* +* This instruction resets the Watchdog Timer. This instruction must be +* executed within a limited time given by the WD prescaler. See the Watchdog +* Timer hardware specification. +*/ +static bool trans_WDR (DisasContext *ctx,arg_WDR *a) +{ +gen_helper_wdr (cpu_env); + +return true; +}
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 10/22 target/avr: Add instruction translation - CPU main translation function
In reply to Michael Rolnik--- target/avr/translate.c | 234 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 234 insertions(+)
target/avr/translate.c +234 -0
@@ -2674,3 +2674,237 @@ static bool trans_WDR(DisasContext *ctx, arg_WDR *a)return true; } + + +void avr_cpu_tcg_init (void ) +{ +int i; + +#define AVR_REG_OFFS (x) offsetof(CPUAVRState, x) + cpu_pc =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (pc_w),"pc" ); + cpu_Cf =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (sregC),"Cf" ); + cpu_Zf =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (sregZ),"Zf" ); + cpu_Nf =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (sregN),"Nf" ); + cpu_Vf =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (sregV),"Vf" ); + cpu_Sf =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (sregS),"Sf" ); + cpu_Hf =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (sregH),"Hf" ); + cpu_Tf =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (sregT),"Tf" ); + cpu_If =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (sregI),"If" ); + cpu_rampD =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (rampD),"rampD" ); + cpu_rampX =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (rampX),"rampX" ); + cpu_rampY =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (rampY),"rampY" ); + cpu_rampZ =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (rampZ),"rampZ" ); + cpu_eind =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (eind),"eind" ); + cpu_sp =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (sp),"sp" ); + cpu_skip =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (skip),"skip" ); + +for (i =0 ; i <NUMBER_OF_CPU_REGISTERS ; i++) { + cpu_r[i] =tcg_global_mem_new_i32 (cpu_env,AVR_REG_OFFS (r[i]), + reg_names[i]); + } +#undef AVR_REG_OFFS +} + +static void translate (DisasContext *ctx) +{ +uint32_t opcode =next_word (ctx); + +if (!decode_insn (ctx, opcode)) { +gen_helper_unsupported (cpu_env); + ctx->bstate =DISAS_NORETURN ; + } +} + +/* Standardize the cpu_skip condition to NE. */ +static bool canonicalize_skip (DisasContext *ctx) +{ +switch (ctx->skip_cond) { +case TCG_COND_NEVER : +/* Normal case: cpu_skip is known to be false. */ +return false; + +case TCG_COND_ALWAYS : +/* +* Breakpoint case: cpu_skip is known to be true, via TB_FLAGS_SKIP. +* The breakpoint is on the instruction being skipped, at the start +* of the TranslationBlock. No need to update. +*/ +return false; + +case TCG_COND_NE : +if (ctx->skip_var1 ==NULL ) { +tcg_gen_mov_tl (cpu_skip, ctx->skip_var0); + }else { +tcg_gen_xor_tl (cpu_skip, ctx->skip_var0, ctx->skip_var1); + ctx->skip_var1 =NULL ; + } +break ; + +default : +/* Convert to a NE condition vs 0. */ +if (ctx->skip_var1 ==NULL ) { +tcg_gen_setcondi_tl (ctx->skip_cond, cpu_skip, ctx->skip_var0,0 ); + }else { +tcg_gen_setcond_tl (ctx->skip_cond, cpu_skip, + ctx->skip_var0, ctx->skip_var1); + ctx->skip_var1 =NULL ; + } + ctx->skip_cond =TCG_COND_NE ; +break ; + } +if (ctx->free_skip_var0) { +tcg_temp_free (ctx->skip_var0); + ctx->free_skip_var0 = false; + } + ctx->skip_var0 = cpu_skip; +return true; +} + +void gen_intermediate_code (CPUState *cs,TranslationBlock *tb,int max_insns) +{ +CPUAVRState *env = cs->env_ptr; +DisasContext ctx = { + .tb = tb, + .cs = cs, + .env = env, + .memidx =0 , + .bstate =DISAS_NEXT , + .skip_cond =TCG_COND_NEVER , + .singlestep = cs->singlestep_enabled, + }; +target_ulong pc_start = tb->pc /2 ; +int num_insns =0 ; + +if (tb->flags &TB_FLAGS_FULL_ACCESS ) { +/* +* This flag is set by ST/LD instruction we will regenerate it ONLY +* with mem/cpu memory access instead of mem access +*/ + max_insns =1 ; + } +if (ctx.singlestep) { + max_insns =1 ; + } + +gen_tb_start (tb); + + ctx.npc = pc_start; +if (tb->flags &TB_FLAGS_SKIP ) { + ctx.skip_cond =TCG_COND_ALWAYS ; + ctx.skip_var0 = cpu_skip; + } + +do { +TCGLabel *skip_label =NULL ; + +/* translate current instruction */ +tcg_gen_insn_start (ctx.npc); + num_insns++; + +/* +* this is due to some strange GDB behavior +* let's assume main has address 0x100 +* b main - sets breakpoint at address 0x00000100 (code) +* b *0x100 - sets breakpoint at address 0x00800100 (data) +*/ +if (unlikely (!ctx.singlestep && + (cpu_breakpoint_test (cs,OFFSET_CODE + ctx.npc *2 ,BP_ANY ) || +cpu_breakpoint_test (cs,OFFSET_DATA + ctx.npc *2 ,BP_ANY )))) { +canonicalize_skip (&ctx); +tcg_gen_movi_tl (cpu_pc, ctx.npc); +gen_helper_debug (cpu_env); + goto done_generating; + } + +/* Conditionally skip the next instruction, if indicated. */ +if (ctx.skip_cond !=TCG_COND_NEVER ) { + skip_label =gen_new_label (); +if (ctx.skip_var0 == cpu_skip) { +/* +* Copy cpu_skip so that we may zero it before the branch. +* This ensures that cpu_skip is non-zero after the label +* if and only if the skipped insn itself sets a skip. +*/ + ctx.free_skip_var0 = true; + ctx.skip_var0 =tcg_temp_new (); +tcg_gen_mov_tl (ctx.skip_var0, cpu_skip); +tcg_gen_movi_tl (cpu_skip,0 ); + } +if (ctx.skip_var1 ==NULL ) { +tcg_gen_brcondi_tl (ctx.skip_cond, ctx.skip_var0,0 , skip_label); + }else { +tcg_gen_brcond_tl (ctx.skip_cond, ctx.skip_var0, + ctx.skip_var1, skip_label); + ctx.skip_var1 =NULL ; + } +if (ctx.free_skip_var0) { +tcg_temp_free (ctx.skip_var0); + ctx.free_skip_var0 = false; + } + ctx.skip_cond =TCG_COND_NEVER ; + ctx.skip_var0 =NULL ; + } + +translate (&ctx); + +if (skip_label) { +canonicalize_skip (&ctx); +gen_set_label (skip_label); +if (ctx.bstate ==DISAS_NORETURN ) { + ctx.bstate =DISAS_CHAIN ; + } + } + }while (ctx.bstate ==DISAS_NEXT + && num_insns < max_insns + && (ctx.npc - pc_start) *2 <TARGET_PAGE_SIZE -4 + && !tcg_op_buf_full ()); + +if (tb->cflags &CF_LAST_IO ) { +gen_io_end (); + } + +bool nonconst_skip =canonicalize_skip (&ctx); + +switch (ctx.bstate) { +case DISAS_NORETURN : +assert (!nonconst_skip); +break ; +case DISAS_NEXT : +case DISAS_TOO_MANY : +case DISAS_CHAIN : +if (!nonconst_skip) { +/* Note gen_goto_tb checks singlestep. */ +gen_goto_tb (&ctx,1 , ctx.npc); +break ; + } +tcg_gen_movi_tl (cpu_pc, ctx.npc); +/* fall through */ +case DISAS_LOOKUP : +if (!ctx.singlestep) { +tcg_gen_lookup_and_goto_ptr (); +break ; + } +/* fall through */ +case DISAS_EXIT : +if (ctx.singlestep) { +gen_helper_debug (cpu_env); + }else { +tcg_gen_exit_tb (NULL ,0 ); + } +break ; +default : +g_assert_not_reached (); + } + +done_generating: +gen_tb_end (tb, num_insns); + + tb->size = (ctx.npc - pc_start) *2 ; + tb->icount = num_insns; +} + +void restore_state_to_opc (CPUAVRState *env,TranslationBlock *tb, +target_ulong *data) +{ + env->pc_w = data[0 ]; +}
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 11/22 target/avr: Add instruction disassembly function
In reply to Michael RolnikProvide function disassembles executed instruction when -d in_asm is provided
Example:./avr-softmmu/qemu-system-avr -bios free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf -d in_asm will produce something like the following
```
...
IN:
0x0000014a: CALL 0x3808
IN: main
0x00003808: CALL 0x4b4
IN: vParTestInitialise
0x000004b4: LDI r24, 255
0x000004b6: STS r24, 0
0x000004b8: MULS r16, r20
0x000004ba: OUT $1, r24
0x000004bc: LDS r24, 0
0x000004be: MULS r16, r20
0x000004c0: OUT $2, r24
0x000004c2: RET
...
```--- target/avr/cpu.h | 1 + target/avr/cpu.c | 2 +- target/avr/disas.c | 245 +++++++++++++++++++++++++++++++++++++++++ target/avr/translate.c | 11 ++ 4 files changed, 258 insertions(+), 1 deletion(-) create mode 100644 target/avr/disas.c
target/avr/cpu.h +1 -0
@@ -160,6 +160,7 @@ bool avr_cpu_exec_interrupt(CPUState *cpu, int int_req);hwaddr avr_cpu_get_phys_page_debug (CPUState *cpu,vaddr addr);int avr_cpu_gdb_read_register (CPUState *cpu,uint8_t *buf,int reg);int avr_cpu_gdb_write_register (CPUState *cpu,uint8_t *buf,int reg); +int avr_print_insn (bfd_vma addr,disassemble_info *info);static inline int avr_feature (CPUAVRState *env,AVRFeature feature) {
target/avr/cpu.c +1 -1
@@ -84,7 +84,7 @@ static void avr_cpu_reset(CPUState *cs)static void avr_cpu_disas_set_info (CPUState *cpu,disassemble_info *info) { info->mach = bfd_arch_avr; - info->print_insn =NULL ; + info->print_insn = avr_print_insn; }static void avr_cpu_realizefn (DeviceState *dev,Error **errp)
target/avr/disas.c new file +245 -0
245 lines not on this page · raw message
target/avr/translate.c +11 -0
@@ -2901,6 +2901,17 @@ done_generating: tb->size = (ctx.npc - pc_start) *2 ; tb->icount = num_insns; + +#ifdef DEBUG_DISAS +if (qemu_loglevel_mask (CPU_LOG_TB_IN_ASM ) + &&qemu_log_in_addr_range (tb->pc)) { +qemu_log_lock (); +qemu_log ("IN: %s\n" ,lookup_symbol (tb->pc)); +log_target_disas (cs, tb->pc, tb->size); +qemu_log ("\n" ); +qemu_log_unlock (); + } +#endif } void restore_state_to_opc(CPUAVRState *env, TranslationBlock *tb,
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 12/22 target/avr: Add limited support for USART peripheral
In reply to Michael RolnikThese were designed to facilitate testing but should provide enough function to be useful in other contexts.
Only a subset of the functions of each peripheral is implemented, mainly due to the lack of a standard way to handle electrical connections (like GPIO pins).
--- include/hw/char/avr_usart.h | 93 +++++++++++ hw/char/avr_usart.c | 320 ++++++++++++++++++++++++++++++++++++ hw/char/Kconfig | 3 + hw/char/Makefile.objs | 1 + 4 files changed, 417 insertions(+) create mode 100644 include/hw/char/avr_usart.h create mode 100644 hw/char/avr_usart.c
include/hw/char/avr_usart.h new file +93 -0
@@ -0,0 +1,93 @@ +/* +* AVR USART +* +* Copyright (c) 2018 University of Kent +* Author: Sarah Harris +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +#ifndef HW_AVR_USART_H +#define HW_AVR_USART_H + +#include "hw/sysbus.h" +#include "chardev/char-fe.h" +#include "hw/hw.h" + +/* Offsets of registers. */ +#define USART_DR 0x06 +#define USART_CSRA 0x00 +#define USART_CSRB 0x01 +#define USART_CSRC 0x02 +#define USART_BRRH 0x05 +#define USART_BRRL 0x04 + +/* Relevant bits in regiters. */ +#define USART_CSRA_RXC (1 << 7) +#define USART_CSRA_TXC (1 << 6) +#define USART_CSRA_DRE (1 << 5) +#define USART_CSRA_MPCM (1 << 0) + +#define USART_CSRB_RXCIE (1 << 7) +#define USART_CSRB_TXCIE (1 << 6) +#define USART_CSRB_DREIE (1 << 5) +#define USART_CSRB_RXEN (1 << 4) +#define USART_CSRB_TXEN (1 << 3) +#define USART_CSRB_CSZ2 (1 << 2) +#define USART_CSRB_RXB8 (1 << 1) +#define USART_CSRB_TXB8 (1 << 0) + +#define USART_CSRC_MSEL1 (1 << 7) +#define USART_CSRC_MSEL0 (1 << 6) +#define USART_CSRC_PM1 (1 << 5) +#define USART_CSRC_PM0 (1 << 4) +#define USART_CSRC_CSZ1 (1 << 2) +#define USART_CSRC_CSZ0 (1 << 1) + +#define TYPE_AVR_USART "avr-usart" +#define AVR_USART (obj) \ + OBJECT_CHECK(AVRUsartState, (obj), TYPE_AVR_USART) + +typedef struct { +/* <private> */ +SysBusDevice parent_obj; + +/* <public> */ +MemoryRegion mmio; + +CharBackend chr; + +bool enabled; + +uint8_t data; +bool data_valid; +uint8_t char_mask; +/* Control and Status Registers */ +uint8_t csra; +uint8_t csrb; +uint8_t csrc; +/* Baud Rate Registers (low/high byte) */ +uint8_t brrh; +uint8_t brrl; + +/* Receive Complete */ +qemu_irq rxc_irq; +/* Transmit Complete */ +qemu_irq txc_irq; +/* Data Register Empty */ +qemu_irq dre_irq; +}AVRUsartState ; + +#endif /* HW_AVR_USART_H */
hw/char/avr_usart.c new file +320 -0
320 lines not on this page · raw message
hw/char/Kconfig +3 -0
@@ -46,3 +46,6 @@ config SCLPCONSOLE config TERMINAL3270 bool + +config AVR_USART + bool
hw/char/Makefile.objs +1 -0
@@ -21,6 +21,7 @@ obj-$(CONFIG_PSERIES) += spapr_vty.o obj-$(CONFIG_DIGIC) += digic-uart.o obj-$(CONFIG_STM32F2XX_USART) += stm32f2xx_usart.o obj-$(CONFIG_RASPI) += bcm2835_aux.o +common-obj-$(CONFIG_AVR_USART) += avr_usart.o common-obj-$(CONFIG_CMSDK_APB_UART) += cmsdk-apb-uart.o common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o
Signature · 1 line
2.17.2 (Apple Git-113)
Re: [PATCH v39 12/22] target/avr: Add limited support for USART peripheral
Quoted 4 lines · Michael Rolnik
These were designed to facilitate testing but should provide enough function to be useful in other contexts.
Only a subset of the functions of each peripheral is implemented, mainly due to the lack of a standard way to handle electrical connections (like GPIO pins).Signed-off-by Sarah Harris <[email protected]>
Quoted 8 lines
--- include/hw/char/avr_usart.h | 93 +++++++++++ hw/char/avr_usart.c | 320 ++++++++++++++++++++++++++++++++++++ hw/char/Kconfig | 3 + hw/char/Makefile.objs | 1 + 4 files changed, 417 insertions(+)create mode 100644
include/hw/char/avr_usart.h
create mode 100644hw/char/avr_usart.c
Note in patch subject (also the next patches:timers, intc, sample board) are not "target/avr" but "hw/avr".
PATCH v39 13/22 target/avr: Add limited support for 16 bit timer peripheral
In reply to Michael RolnikThese were designed to facilitate testing but should provide enough function to be useful in other contexts.
Only a subset of the functions of each peripheral is implemented, mainly due to the lack of a standard way to handle electrical connections (like GPIO pins).
--- include/hw/timer/avr_timer16.h | 93 +++++ hw/timer/avr_timer16.c | 601 +++++++++++++++++++++++++++++++++ hw/timer/Kconfig | 3 + hw/timer/Makefile.objs | 2 + 4 files changed, 699 insertions(+) create mode 100644 include/hw/timer/avr_timer16.h create mode 100644 hw/timer/avr_timer16.c
include/hw/timer/avr_timer16.h new file +93 -0
@@ -0,0 +1,93 @@ +/* +* AVR 16 bit timer +* +* Copyright (c) 2018 University of Kent +* Author: Ed Robbins +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +/* +* Driver for 16 bit timers on 8 bit AVR devices. +* Note: +* On ATmega640/V-1280/V-1281/V-2560/V-2561/V timers 1, 3, 4 and 5 are 16 bit +*/ + +#ifndef AVR_TIMER16_H +#define AVR_TIMER16_H + +#include "hw/sysbus.h" +#include "qemu/timer.h" +#include "hw/hw.h" + +enum NextInterrupt { +OVERFLOW , +COMPA , +COMPB , +COMPC , +CAPT +}; + +#define TYPE_AVR_TIMER16 "avr-timer16" +#define AVR_TIMER16 (obj) \ + OBJECT_CHECK(AVRTimer16State, (obj), TYPE_AVR_TIMER16) + +typedef struct AVRTimer16State { +/* <private> */ +SysBusDevice parent_obj; + +/* <public> */ +MemoryRegion iomem; +MemoryRegion imsk_iomem; +MemoryRegion ifr_iomem; +QEMUTimer *timer; +qemu_irq capt_irq; +qemu_irq compa_irq; +qemu_irq compb_irq; +qemu_irq compc_irq; +qemu_irq ovf_irq; + +bool enabled; + +/* registers */ +uint8_t cra; +uint8_t crb; +uint8_t crc; +uint8_t cntl; +uint8_t cnth; +uint8_t icrl; +uint8_t icrh; +uint8_t ocral; +uint8_t ocrah; +uint8_t ocrbl; +uint8_t ocrbh; +uint8_t ocrcl; +uint8_t ocrch; +/* +* Reads and writes to CNT and ICR utilise a bizarre temporary +* register, which we emulate +*/ +uint8_t rtmp; +uint8_t imsk; +uint8_t ifr; + +uint64_t cpu_freq_hz; +uint64_t freq_hz; +uint64_t period_ns; +uint64_t reset_time_ns; +enum NextInterrupt next_interrupt; +}AVRTimer16State ; + +#endif /* AVR_TIMER16_H */
hw/timer/avr_timer16.c new file +601 -0
601 lines not on this page · raw message
hw/timer/Kconfig +3 -0
@@ -34,3 +34,6 @@ config CMSDK_APB_TIMER config CMSDK_APB_DUALTIMER bool select PTIMER + +config AVR_TIMER16 + bool
hw/timer/Makefile.objs +2 -0
@@ -35,3 +35,5 @@ common-obj-$(CONFIG_CMSDK_APB_TIMER) += cmsdk-apb-timer.o common-obj-$(CONFIG_CMSDK_APB_DUALTIMER) += cmsdk-apb-dualtimer.o common-obj-$(CONFIG_MSF2) += mss-timer.o common-obj-$(CONFIG_RASPI) += bcm2835_systmr.o + +obj-$(CONFIG_AVR_TIMER16) += avr_timer16.o
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 14/22 target/avr: Add dummy mask device
In reply to Michael Rolnik--- include/hw/misc/avr_mask.h | 47 ++++++++++++++++ hw/misc/avr_mask.c | 112 +++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + 4 files changed, 164 insertions(+) create mode 100644 include/hw/misc/avr_mask.h create mode 100644 hw/misc/avr_mask.c
include/hw/misc/avr_mask.h new file +47 -0
@@ -0,0 +1,47 @@ +/* +* AVR Power Reduction +* +* Copyright (c) 2019 Michael Rolnik +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +* THE SOFTWARE. +*/ + +#ifndef HW_avr_mask_H +#define HW_avr_mask_H + +#include "hw/sysbus.h" +#include "chardev/char-fe.h" +#include "hw/hw.h" + + +#define TYPE_AVR_MASK "avr-mask" +#define AVR_MASK (obj) OBJECT_CHECK(AVRMaskState, (obj), TYPE_AVR_MASK) + +typedef struct { +/* <private> */ +SysBusDevice parent_obj; + +/* <public> */ +MemoryRegion iomem; + +uint8_t val; +qemu_irq irq[8 ]; +}AVRMaskState ; + +#endif /* HW_avr_mask_H */
hw/misc/avr_mask.c new file +112 -0
112 lines not on this page · raw message
hw/misc/Kconfig +3 -0
@@ -125,4 +125,7 @@ config MAC_VIA select MOS6522 select ADB +config AVR_MASK + bool + source macio/Kconfig
hw/misc/Makefile.objs +2 -0
@@ -82,3 +82,5 @@ common-obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o obj-$(CONFIG_MAC_VIA) += mac_via.o common-obj-$(CONFIG_GRLIB) += grlib_ahb_apb_pnp.o + +obj-$(CONFIG_AVR_MASK) += avr_mask.o
Signature · 1 line
2.17.2 (Apple Git-113)
Re: [PATCH v39 14/22] target/avr: Add dummy mask device
Quoted 2 lines · Michael Rolnik
Signed-off-by Michael Rolnik <[email protected]>---
Hi, Michael.
Please avoid empty commit messages.
At the very beginning, there is a line:
+ * AVR Power Reduction
Why is that? There is a power reduction register in the docs, but is it covered in this patch?
Further, "mask" is too genetic word. Pkease use more specific name bot fir filename and variables within this patch. "interrupt controller", "irq_masq", "IrqMask", "irq" are justsome of ideas.
Yours,
Aleksandar
Quoted 227 lines
include/hw/misc/avr_mask.h | 47 ++++++++++++++++ hw/misc/avr_mask.c | 112 +++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + 4 files changed, 164 insertions(+) create mode 100644 include/hw/misc/avr_mask.h create mode 100644 hw/misc/avr_mask.cinclude/hw/misc/avr_mask.h new file +6
-0@@ -0,0 +1,47 @@ +/* +* AVR Power Reduction +* +* Copyright (c) 2019 Michael Rolnik +* +* Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */include/hw/misc/avr_mask.h new file +24
-0+ +#ifndef HW_avr_mask_H +#define HW_avr_mask_H + +#include "hw/sysbus.h" +#include "chardev/char-fe.h" +#include "hw/hw.h" + + +#define TYPE_AVR_MASK "avr-mask" +#define AVR_MASK (obj) OBJECT_CHECK(AVRMaskState, (obj), TYPE_AVR_MASK) + +typedef struct { +/* <private> */ +SysBusDevice parent_obj; + +/* <public> */ +MemoryRegion iomem; + +uint8_t val; +qemu_irq irq[8 ]; +}AVRMaskState ; + +#endif /* HW_avr_mask_H */ hw/misc/avr_mask.c new file +6
-0@@ -0,0 +1,112 @@ +/* +* AVR Power Reduction +* +* Copyright (c) 2019 Michael Rolnik +* +* Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */hw/misc/avr_mask.c new file +9
-0+ +#include "qemu/osdep.h" +#include "hw/misc/avr_mask.h" +#include "qemu/log.h" +#include "hw/qdev-properties.h" +#include "hw/irq.h" + +#define DB_PRINT(fmt, args...) /* Nothing */ +/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
hw/misc/avr_mask.c new file +50
-0+ +static void avr_mask_reset (DeviceState *dev) +{ +AVRMaskState *s =AVR_MASK (dev); + + s->val =0x00 ; + +for (int i =0 ; i <8 ; i++) { +qemu_set_irq (s->irq[i],0 ); + } +} + +static uint64_t avr_mask_read (void *opaque,hwaddr offset,unsigned size) +{ +assert (size ==1 ); +assert (offset ==0 ); +AVRMaskState *s = opaque; + +return (uint64_t )s->val; +} + +static void avr_mask_write (void *opaque,hwaddr offset, +uint64_t val64,unsigned size) +{ +assert (size ==1 ); +assert (offset ==0 ); +AVRMaskState *s = opaque; +uint8_t val8 = val64; + +DB_PRINT ("write %d to offset %d" , val8, (uint8_t )offset); + + s->val = val8; +for (int i =0 ; i <8 ; i++) { +qemu_set_irq (s->irq[i], (val8 & (1 << i)) !=0 ); + } +} + +static const MemoryRegionOps avr_mask_ops = { + .read = avr_mask_read, + .write = avr_mask_write, + .endianness =DEVICE_NATIVE_ENDIAN , + .impl = {.max_access_size =1 } +}; + +static void avr_mask_init (Object *dev) +{ +AVRMaskState *s =AVR_MASK (dev); +SysBusDevice *busdev =SYS_BUS_DEVICE (dev); + + memory_region_init_io(&s->iomem, dev, &avr_mask_ops, s,
TYPE_AVR_MASK,hw/misc/avr_mask.c new file +30
-0+ 0x01); +sysbus_init_mmio (busdev, &s->iomem); + +for (int i =0 ; i <8 ; i++) { +sysbus_init_irq (busdev, &s->irq[i]); + } + s->val =0x00 ; +} + +static void avr_mask_class_init (ObjectClass *klass,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (klass); + + dc->reset = avr_mask_reset; +} + +static const TypeInfo avr_mask_info = { + .name =TYPE_AVR_MASK , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (AVRMaskState), + .class_init = avr_mask_class_init, + .instance_init = avr_mask_init, +}; + +static void avr_mask_register_types (void ) +{ +type_register_static (&avr_mask_info); +} + +type_init (avr_mask_register_types)hw/misc/Kconfig +3
-0@@ -125,4 +125,7 @@ config MAC_VIA select MOS6522 select ADB +config AVR_MASK + bool + source macio/Kconfighw/misc/Makefile.objs +2
-1@@ -82,3 +82,5 @@ common-obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o obj-$(CONFIG_MAC_VIA) += mac_via.o common-obj-$(CONFIG_GRLIB) += grlib_ahb_apb_pnp.o + +obj-$(CONFIG_AVR_MASK) += avr_mask.o --2.17.2 (Apple Git-113)
Re: [PATCH v39 14/22] target/avr: Add dummy mask device
This device is not "Power Reduction" but power reduction registers can be implemented with it. All it does, whenever a bit is written the device raises an interrupt / IRQ.
If you have a better name please advise.
Quoted 256 lines · Aleksandar Markovic
Quoted 2 lines · Michael Rolnik
Signed-off-by Michael Rolnik <[email protected]>---
Hi, Michael.
Please avoid empty commit messages.
At the very beginning, there is a line:
+ * AVR Power Reduction
Why is that? There is a power reduction register in the docs, but is it covered in this patch?
Further, "mask" is too genetic word. Pkease use more specific name bot fir filename and variables within this patch. "interrupt controller", "
irq_masq", "IrqMask", "irq" are justsome of ideas.Yours,
AleksandarQuoted 229 lines
include/hw/misc/avr_mask.h | 47 ++++++++++++++++ hw/misc/avr_mask.c | 112 +++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + 4 files changed, 164 insertions(+) create mode 100644 include/hw/misc/avr_mask.h create mode 100644 hw/misc/avr_mask.cinclude/hw/misc/avr_mask.h new file +6
-0@@ -0,0 +1,47 @@ +/* +* AVR Power Reduction +* +* Copyright (c) 2019 Michael Rolnik +* +* Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */include/hw/misc/avr_mask.h new file +24
-0+ +#ifndef HW_avr_mask_H +#define HW_avr_mask_H + +#include "hw/sysbus.h" +#include "chardev/char-fe.h" +#include "hw/hw.h" + + +#define TYPE_AVR_MASK "avr-mask" +#define AVR_MASK (obj) OBJECT_CHECK(AVRMaskState, (obj), TYPE_AVR_MASK) + +typedef struct { +/* <private> */ +SysBusDevice parent_obj; + +/* <public> */ +MemoryRegion iomem; + +uint8_t val; +qemu_irq irq[8 ]; +}AVRMaskState ; + +#endif /* HW_avr_mask_H */ hw/misc/avr_mask.c new file +6
-0@@ -0,0 +1,112 @@ +/* +* AVR Power Reduction +* +* Copyright (c) 2019 Michael Rolnik +* +* Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */hw/misc/avr_mask.c new file +9
-0+ +#include "qemu/osdep.h" +#include "hw/misc/avr_mask.h" +#include "qemu/log.h" +#include "hw/qdev-properties.h" +#include "hw/irq.h" + +#define DB_PRINT(fmt, args...) /* Nothing */ +/*#define DB_PRINT(fmt, args...) printf("%s: " fmt "\n", __func__, ## args)*/
hw/misc/avr_mask.c new file +50
-0+ +static void avr_mask_reset (DeviceState *dev) +{ +AVRMaskState *s =AVR_MASK (dev); + + s->val =0x00 ; + +for (int i =0 ; i <8 ; i++) { +qemu_set_irq (s->irq[i],0 ); + } +} + +static uint64_t avr_mask_read (void *opaque,hwaddr offset,unsigned size) +{ +assert (size ==1 ); +assert (offset ==0 ); +AVRMaskState *s = opaque; + +return (uint64_t )s->val; +} + +static void avr_mask_write (void *opaque,hwaddr offset, +uint64_t val64,unsigned size) +{ +assert (size ==1 ); +assert (offset ==0 ); +AVRMaskState *s = opaque; +uint8_t val8 = val64; + +DB_PRINT ("write %d to offset %d" , val8, (uint8_t )offset); + + s->val = val8; +for (int i =0 ; i <8 ; i++) { +qemu_set_irq (s->irq[i], (val8 & (1 << i)) !=0 ); + } +} + +static const MemoryRegionOps avr_mask_ops = { + .read = avr_mask_read, + .write = avr_mask_write, + .endianness =DEVICE_NATIVE_ENDIAN , + .impl = {.max_access_size =1 } +}; + +static void avr_mask_init (Object *dev) +{ +AVRMaskState *s =AVR_MASK (dev); +SysBusDevice *busdev =SYS_BUS_DEVICE (dev); + + memory_region_init_io(&s->iomem, dev, &avr_mask_ops, s,
TYPE_AVR_MASK,hw/misc/avr_mask.c new file +30
-0+ 0x01); +sysbus_init_mmio (busdev, &s->iomem); + +for (int i =0 ; i <8 ; i++) { +sysbus_init_irq (busdev, &s->irq[i]); + } + s->val =0x00 ; +} + +static void avr_mask_class_init (ObjectClass *klass,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (klass); + + dc->reset = avr_mask_reset; +} + +static const TypeInfo avr_mask_info = { + .name =TYPE_AVR_MASK , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (AVRMaskState), + .class_init = avr_mask_class_init, + .instance_init = avr_mask_init, +}; + +static void avr_mask_register_types (void ) +{ +type_register_static (&avr_mask_info); +} + +type_init (avr_mask_register_types)hw/misc/Kconfig +3
-0@@ -125,4 +125,7 @@ config MAC_VIA select MOS6522 select ADB +config AVR_MASK + bool + source macio/Kconfighw/misc/Makefile.objs +2
-1@@ -82,3 +82,5 @@ common-obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o obj-$(CONFIG_MAC_VIA) += mac_via.o common-obj-$(CONFIG_GRLIB) += grlib_ahb_apb_pnp.o + +obj-$(CONFIG_AVR_MASK) += avr_mask.o --2.17.2 (Apple Git-113)
Signature · 2 lines
Best Regards, Michael Rolnik
Michael Rolnik
NAKPATCH v39 15/22 target/avr: Add example board configuration
In reply to Michael RolnikA simple board setup that configures an AVR CPU to run a given firmware image.
This is all that's useful to implement without peripheral emulation as AVR CPUs include a lot of on-board peripherals.
NOTE: this is not a real board !!!!
NOTE: it's used for CPU testing!!!!
--- include/elf.h | 2 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- hw/avr/sample.c | 293 +++++++++++++++++++++++++++++++++++++++++++ hw/core/loader.c | 15 +-- hw/riscv/boot.c | 2 +- hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + 9 files changed, 321 insertions(+), 11 deletions(-) create mode 100644 hw/avr/sample.c create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objs
include/elf.h +2 -0
@@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {#define EM_MOXIE 223/* Moxie processor family */ #define EM_MOXIE_OLD 0xFEED +#define EM_AVR 83/* AVR 8-bit microcontroller */ +/* This is the info that is needed to parse the dynamic section of the file */ #define DT_NULL 0#define DT_NEEDED 1
include/hw/elf_ops.h +5 -1
@@ -316,7 +316,8 @@ static int glue(load_elf, SZ)(const char *name, int fd,void *translate_opaque, int must_swab, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine, int clear_lsb, int data_swab, + uint32_t *pe_flags, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) {
@@ -594,6 +595,9 @@ static int glue(load_elf, SZ)(const char *name, int fd, } } +if (pe_flags) { + *pe_flags = (uint32_t )(elf_sword )ehdr.e_flags; + }if (lowaddr) *lowaddr = (uint64_t )(elf_sword )low;if (highaddr)
include/hw/loader.h +4 -2
@@ -101,6 +101,7 @@ const char *load_elf_strerror(int error);* @pentry: Populated with program entry point. Ignored if NULL. * @lowaddr: Populated with lowest loaded address. Ignored if NULL. * @highaddr: Populated with highest loaded address. Ignored if NULL. +* @pe_flags: Populated with e_flags. Ignore if NULL. * @bigendian: Expected ELF endianness. 0 for LE otherwise BE * @elf_machine: Expected ELF machine type * @clear_lsb: Set to mask off LSB of addresses (Some architectures use
@@ -131,8 +132,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int big_endian, - int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t *pe_flags, + int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb);/** load_elf_ram:
hw/avr/sample.c new file +293 -0
293 lines not on this page · raw message
hw/core/loader.c +8 -7
@@ -438,7 +438,7 @@ int load_elf_ram(const char *filename, {return load_elf_ram_sym (filename, elf_note_fn, translate_fn, translate_opaque, - pentry, lowaddr, highaddr, big_endian, + pentry, lowaddr, highaddr,NULL , big_endian, elf_machine, clear_lsb, data_swab, as, load_rom,NULL ); }
@@ -448,8 +448,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int big_endian, - int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t *pe_flags, + int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) { int fd, data_order, target_data_order, must_swab, ret = ELF_LOAD_FAILED;
@@ -490,13 +491,13 @@ int load_elf_ram_sym(const char *filename,if (e_ident[EI_CLASS ] ==ELFCLASS64 ) { ret =load_elf64 (filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine, clear_lsb, - data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags, elf_machine, + clear_lsb, data_swab, as, load_rom, sym_cb); }else { ret =load_elf32 (filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine, clear_lsb, - data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags, elf_machine, + clear_lsb, data_swab, as, load_rom, sym_cb); } fail:
hw/riscv/boot.c +1 -1
@@ -119,7 +119,7 @@ target_ulong riscv_load_kernel(const char *kernel_filename, symbol_fn_t sym_cb)uint64_t kernel_entry, kernel_high;if (load_elf_ram_sym (kernel_filename,NULL ,NULL ,NULL , - &kernel_entry,NULL , &kernel_high,0 , + &kernel_entry,NULL , &kernel_high,NULL ,0 ,EM_RISCV ,1 ,0 ,NULL , true, sym_cb) >0 ) {return kernel_entry; }
hw/Kconfig +1 -0
@@ -43,6 +43,7 @@ source watchdog/Kconfig # arch Kconfig source arm/Kconfig source alpha/Kconfig +source avr/Kconfig source cris/Kconfig source hppa/Kconfig source i386/Kconfig
hw/avr/Kconfig new file +6 -0
@@ -0,0 +1,6 @@ +config AVR_SAMPLE + bool + select AVR_TIMER16 + select AVR_USART + select AVR_MASK + select UNIMP
hw/avr/Makefile.objs new file +1 -0
@@ -0,0 +1 @@ +obj-y += sample.o
Signature · 1 line
2.17.2 (Apple Git-113)
Re: [PATCH v39 15/22] target/avr: Add example board configuration
Quoted 289 lines · On Wed, 18 Dec 2019 23:03:22 +0200 Michael Rolnik <[email protected]> wrote:
A simple board setup that configures an AVR CPU to run a given firmware image.
This is all that's useful to implement without peripheral emulation as AVR CPUs include a lot of on-board peripherals.NOTE: this is not a real board !!!!
NOTE: it's used for CPU testing!!!!Signed-off-by Michael Rolnik <[email protected]>Reviewed-by Aleksandar Markovic <[email protected]>--- include/elf.h | 2 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- hw/avr/sample.c | 293 +++++++++++++++++++++++++++++++++++++++++++ hw/core/loader.c | 15 +-- hw/riscv/boot.c | 2 +- hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + 9 files changed, 321 insertions(+), 11 deletions(-) create mode 100644 hw/avr/sample.c create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objsinclude/elf.h +2
-0@@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {#define EM_MOXIE 223/* Moxie processor family */ #define EM_MOXIE_OLD 0xFEED +#define EM_AVR 83/* AVR 8-bit microcontroller */ +/* This is the info that is needed to parse the dynamic section of the file */ #define DT_NULL 0#define DT_NEEDED 1include/hw/elf_ops.h +5
-1@@ -316,7 +316,8 @@ static int glue(load_elf, SZ)(const char *name, int fd,void *translate_opaque, int must_swab, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine, int clear_lsb, int data_swab, + uint32_t *pe_flags, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) {@@ -594,6 +595,9 @@ static int glue(load_elf, SZ)(const char *name, int fd, } } +if (pe_flags) { + *pe_flags = (uint32_t )(elf_sword )ehdr.e_flags; + }if (lowaddr) *lowaddr = (uint64_t )(elf_sword )low;if (highaddr)include/hw/loader.h +4
-2@@ -101,6 +101,7 @@ const char *load_elf_strerror(int error);* @pentry: Populated with program entry point. Ignored if NULL. * @lowaddr: Populated with lowest loaded address. Ignored if NULL. * @highaddr: Populated with highest loaded address. Ignored if NULL. +* @pe_flags: Populated with e_flags. Ignore if NULL. * @bigendian: Expected ELF endianness. 0 for LE otherwise BE * @elf_machine: Expected ELF machine type * @clear_lsb: Set to mask off LSB of addresses (Some architectures use @@ -131,8 +132,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int big_endian, - int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t *pe_flags, + int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb);/** load_elf_ram: hw/avr/sample.c new file +198
-0@@ -0,0 +1,293 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +/* +* NOTE: +* This is not a real AVR board, this is an example! +* The CPU is an approximation of an ATmega2560, but is missing various +* built-in peripherals. +* +* This example board loads provided binary file into flash memory and +* executes it from 0x00000000 address in the code memory space. +* +* Currently used for AVR CPU validation +* +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "cpu.h" +#include "hw/hw.h" +#include "sysemu/sysemu.h" +#include "sysemu/qtest.h" +#include "ui/console.h" +#include "hw/boards.h" +#include "hw/loader.h" +#include "qemu/error-report.h" +#include "exec/address-spaces.h" +#include "include/hw/sysbus.h" +#include "include/hw/char/avr_usart.h" +#include "include/hw/timer/avr_timer16.h" +#include "include/hw/misc/avr_mask.h" +#include "elf.h" +#include "hw/misc/unimp.h" + +#define SIZE_FLASH 0x00040000 +#define SIZE_SRAM 0x00002000 +/* +* Size of additional "external" memory, as if the AVR were configured to use +* an external RAM chip. +* Note that the configuration registers that normally enable this feature are +* unimplemented. +*/ +#define SIZE_EXMEM 0x00000000 + +/* Offsets of peripherals in emulated memory space (i.e. not host addresses) */ +#define PRR0_BASE 0x64 +#define PRR1_BASE 0x65 +#define USART_BASE 0xc0 +#define TIMER1_BASE 0x80 +#define TIMER1_IMSK_BASE 0x6f +#define TIMER1_IFR_BASE 0x36 + +/* Interrupt numbers used by peripherals */ +#define USART_RXC_IRQ 24 +#define USART_DRE_IRQ 25 +#define USART_TXC_IRQ 26 + +#define TIMER1_CAPT_IRQ 15 +#define TIMER1_COMPA_IRQ 16 +#define TIMER1_COMPB_IRQ 17 +#define TIMER1_COMPC_IRQ 18 +#define TIMER1_OVF_IRQ 19 + +/* Power reduction */ +#define PRR1_BIT_PRTIM5 0x05/* Timer/Counter5 */ +#define PRR1_BIT_PRTIM4 0x04/* Timer/Counter4 */ +#define PRR1_BIT_PRTIM3 0x03/* Timer/Counter3 */ +#define PRR1_BIT_PRUSART3 0x02/* USART3 */ +#define PRR1_BIT_PRUSART2 0x01/* USART2 */ +#define PRR1_BIT_PRUSART1 0x00/* USART1 */ + +#define PRR0_BIT_PRTWI 0x06/* TWI */ +#define PRR0_BIT_PRTIM2 0x05/* Timer/Counter2 */ +#define PRR0_BIT_PRTIM0 0x04/* Timer/Counter0 */ +#define PRR0_BIT_PRTIM1 0x03/* Timer/Counter1 */ +#define PRR0_BIT_PRSPI 0x02/* Serial Peripheral Interface */ +#define PRR0_BIT_PRUSART0 0x01/* USART0 */ +#define PRR0_BIT_PRADC 0x00/* ADC */ + +typedef struct { +MachineClass parent; +}SampleMachineClass ; + +typedef struct { +MachineState parent; +MemoryRegion *ram; +MemoryRegion *flash; +AVRUsartState *usart0; +AVRTimer16State *timer1; +AVRMaskState *prr[2 ]; +}SampleMachineState ; + +#define TYPE_SAMPLE_MACHINE MACHINE_TYPE_NAME("sample") + +#define SAMPLE_MACHINE (obj) \ + OBJECT_CHECK(SampleMachineState, obj, TYPE_SAMPLE_MACHINE) +#define SAMPLE_MACHINE_GET_CLASS (obj) \ + OBJECT_GET_CLASS(SampleMachineClass, obj, TYPE_SAMPLE_MACHINE) +#define SAMPLE_MACHINE_CLASS (klass) \ + OBJECT_CLASS_CHECK(SampleMachineClass, klass, TYPE_SAMPLE_MACHINE) + +static void sample_init (MachineState *machine) +{ +SampleMachineState *sms =SAMPLE_MACHINE (machine); +MemoryRegion *system_memory =get_system_memory (); +AVRCPU *cpu; +const char *firmware =NULL ; +const char *filename =NULL ; +const char *cpu_type =NULL ; +uint32_t e_flags; +int bytes_loaded; +SysBusDevice *busdev; +DeviceState *cpudev; + + system_memory =get_system_memory (); + sms->ram =g_new (MemoryRegion,1 ); + sms->flash =g_new (MemoryRegion,1 ); + +/* if ELF file is provided, determine CPU type reading ELF e_flags */ + cpu_type = machine->cpu_type; + firmware = machine->firmware; +if (firmware !=NULL ) { + filename =qemu_find_file (QEMU_FILE_TYPE_BIOS , firmware); +if (filename ==NULL ) { +error_report ("Unable to find %s" , firmware); +exit (1 ); + } + + bytes_loaded =load_elf_ram_sym (filename,NULL ,NULL ,NULL ,NULL ,NULL , +NULL , &e_flags,0 ,EM_AVR ,0 ,0 ,NULL ,0 ,0 ); +if (bytes_loaded >0 ) { + cpu_type =avr_flags_to_cpu_type (e_flags, cpu_type); + } + } + + cpu =AVR_CPU (cpu_create (cpu_type)); + cpudev =DEVICE (cpu); + +memory_region_init_rom (sms->flash,NULL ,"avr.flash" ,SIZE_FLASH , + &error_fatal); +memory_region_add_subregion (system_memory,OFFSET_CODE , sms->flash); + +/* following are atmel2560 device */ +create_unimplemented_device ("usart 3" ,OFFSET_DATA +0x0130 ,0x0007 ); +create_unimplemented_device ("timer-counter-16bit 5" , +OFFSET_DATA +0x0120 ,0x000e ); +create_unimplemented_device ("gpio L" ,OFFSET_DATA +0x0109 ,0x0003 ); +create_unimplemented_device ("gpio K" ,OFFSET_DATA +0x0106 ,0x0003 ); +create_unimplemented_device ("gpio J" ,OFFSET_DATA +0x0103 ,0x0003 ); +create_unimplemented_device ("gpio H" ,OFFSET_DATA +0x0100 ,0x0003 ); +create_unimplemented_device ("usart 2" ,OFFSET_DATA +0x00d0 ,0x0007 ); +create_unimplemented_device ("usart 1" ,OFFSET_DATA +0x00c8 ,0x0007 ); +create_unimplemented_device ("usart 0" ,OFFSET_DATA +0x00c0 ,0x0007 ); +create_unimplemented_device ("twi" ,OFFSET_DATA +0x00b8 ,0x0006 ); +create_unimplemented_device ("timer-counter-async-8bit 2" , +OFFSET_DATA +0x00b0 ,0x0007 ); +create_unimplemented_device ("timer-counter-16bit 4" , +OFFSET_DATA +0x00a0 ,0x000e ); +create_unimplemented_device ("timer-counter-16bit 3" , +OFFSET_DATA +0x0090 ,0x000e ); +create_unimplemented_device ("timer-counter-16bit 1" , +OFFSET_DATA +0x0080 ,0x000e ); +create_unimplemented_device ("ac / adc" , +OFFSET_DATA +0x0078 ,0x0008 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x0074 ,0x0002 ); +create_unimplemented_device ("int-controller" , +OFFSET_DATA +0x0068 ,0x000c ); +create_unimplemented_device ("sys" , +OFFSET_DATA +0x0060 ,0x0007 ); +create_unimplemented_device ("spi" , +OFFSET_DATA +0x004c ,0x0003 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x004a ,0x0002 ); +create_unimplemented_device ("timer-counter-pwm-8bit 0" , +OFFSET_DATA +0x0043 ,0x0006 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x003e ,0x0005 ); +create_unimplemented_device ("int-controller" , +OFFSET_DATA +0x0035 ,0x0009 );
hw/avr/sample.c line 208
Quoted 10 lines
hw/avr/sample.c new file +10
-0+create_unimplemented_device ("gpio G" ,OFFSET_DATA +0x0032 ,0x0003 ); +create_unimplemented_device ("gpio F" ,OFFSET_DATA +0x002f ,0x0003 ); +create_unimplemented_device ("gpio E" ,OFFSET_DATA +0x002c ,0x0003 ); +create_unimplemented_device ("gpio D" ,OFFSET_DATA +0x0029 ,0x0003 ); +create_unimplemented_device ("gpio C" ,OFFSET_DATA +0x0026 ,0x0003 ); +create_unimplemented_device ("gpio B" ,OFFSET_DATA +0x0023 ,0x0003 ); +create_unimplemented_device ("gpio A" ,OFFSET_DATA +0x0020 ,0x0003 ); + +memory_region_allocate_system_memory ( + sms->ram,NULL ,"avr.ram" ,SIZE_SRAM +SIZE_EXMEM );
Please use MachineClass::default_ram_size and add check that '-m' values matches it. See for example
https://github.com/imammedo/qemu/commit/241c65d506ccba1e0239a2bc0632d7dc9c3517c1
(if you respin amend this patch but otherwise it could be a patch on top of this series)
Quoted 172 lines
hw/avr/sample.c new file +85
-0+memory_region_add_subregion (system_memory,OFFSET_DATA +0x200 , sms->ram); + +/* Power Reduction built-in peripheral */ + sms->prr[0 ] =AVR_MASK (sysbus_create_simple (TYPE_AVR_MASK , +OFFSET_DATA +PRR0_BASE ,NULL )); + sms->prr[1 ] =AVR_MASK (sysbus_create_simple (TYPE_AVR_MASK , +OFFSET_DATA +PRR1_BASE ,NULL )); + +/* USART 0 built-in peripheral */ + sms->usart0 =AVR_USART (object_new (TYPE_AVR_USART )); + busdev =SYS_BUS_DEVICE (sms->usart0); +qdev_prop_set_chr (DEVICE (sms->usart0),"chardev" ,serial_hd (0 )); +object_property_set_bool (OBJECT (sms->usart0), true,"realized" , + &error_fatal); +sysbus_mmio_map (busdev,0 ,OFFSET_DATA +USART_BASE ); +/* +* These IRQ numbers don't match the datasheet because we're counting from +* zero and not including reset. +*/ +sysbus_connect_irq (busdev,0 ,qdev_get_gpio_in (cpudev,USART_RXC_IRQ )); +sysbus_connect_irq (busdev,1 ,qdev_get_gpio_in (cpudev,USART_DRE_IRQ )); +sysbus_connect_irq (busdev,2 ,qdev_get_gpio_in (cpudev,USART_TXC_IRQ )); +sysbus_connect_irq (SYS_BUS_DEVICE (sms->prr[1 ]),PRR1_BIT_PRUSART1 , +qdev_get_gpio_in (DEVICE (sms->usart0),0 )); + +/* Timer 1 built-in periphal */ + sms->timer1 =AVR_TIMER16 (object_new (TYPE_AVR_TIMER16 )); +object_property_set_bool (OBJECT (sms->timer1), true,"realized" , + &error_fatal); + busdev =SYS_BUS_DEVICE (sms->timer1); +sysbus_mmio_map (busdev,0 ,OFFSET_DATA +TIMER1_BASE ); +sysbus_mmio_map (busdev,1 ,OFFSET_DATA +TIMER1_IMSK_BASE ); +sysbus_mmio_map (busdev,2 ,OFFSET_DATA +TIMER1_IFR_BASE ); +sysbus_connect_irq (busdev,0 ,qdev_get_gpio_in (cpudev,TIMER1_CAPT_IRQ )); +sysbus_connect_irq (busdev,1 ,qdev_get_gpio_in (cpudev,TIMER1_COMPA_IRQ )); +sysbus_connect_irq (busdev,2 ,qdev_get_gpio_in (cpudev,TIMER1_COMPB_IRQ )); +sysbus_connect_irq (busdev,3 ,qdev_get_gpio_in (cpudev,TIMER1_COMPC_IRQ )); +sysbus_connect_irq (busdev,4 ,qdev_get_gpio_in (cpudev,TIMER1_OVF_IRQ )); +sysbus_connect_irq (SYS_BUS_DEVICE (sms->prr[0 ]),PRR0_BIT_PRTIM1 , +qdev_get_gpio_in (DEVICE (sms->timer1),0 )); + +/* Load firmware (contents of flash) trying to auto-detect format */ +if (filename !=NULL ) { + bytes_loaded =load_elf ( + filename,NULL ,NULL ,NULL ,NULL ,NULL ,NULL ,0 ,EM_NONE ,0 ,0 ); +if (bytes_loaded <0 ) { + bytes_loaded =load_image_targphys ( + filename,OFFSET_CODE ,SIZE_FLASH ); + } +if (bytes_loaded <0 ) { +error_report ( +"Unable to load firmware image %s as ELF or raw binary" , + firmware); +exit (1 ); + } + } +} + +static void sample_class_init (ObjectClass *oc,void *data) +{ +MachineClass *mc =MACHINE_CLASS (oc); + + mc->desc ="AVR sample/example board (ATmega2560)" ; + mc->init = sample_init; + mc->default_cpus =1 ; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mc->default_cpu_type ="avr6-avr-cpu" ;/* ATmega2560. */ + mc->is_default =1 ; +} + +static const TypeInfo sample_info = { + .name =TYPE_SAMPLE_MACHINE , + .parent =TYPE_MACHINE , + .instance_size =sizeof (SampleMachineState), + .class_size =sizeof (SampleMachineClass), + .class_init = sample_class_init, +}; + +static void sample_machine_init (void ) +{ +type_register_static (&sample_info); +} + +type_init (sample_machine_init);hw/core/loader.c +8
-7@@ -438,7 +438,7 @@ int load_elf_ram(const char *filename, {return load_elf_ram_sym (filename, elf_note_fn, translate_fn, translate_opaque, - pentry, lowaddr, highaddr, big_endian, + pentry, lowaddr, highaddr,NULL , big_endian, elf_machine, clear_lsb, data_swab, as, load_rom,NULL ); }@@ -448,8 +448,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int big_endian, - int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t *pe_flags, + int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) { int fd, data_order, target_data_order, must_swab, ret = ELF_LOAD_FAILED;@@ -490,13 +491,13 @@ int load_elf_ram_sym(const char *filename,if (e_ident[EI_CLASS ] ==ELFCLASS64 ) { ret =load_elf64 (filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine, clear_lsb, - data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags, elf_machine, + clear_lsb, data_swab, as, load_rom, sym_cb); }else { ret =load_elf32 (filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine, clear_lsb, - data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags, elf_machine, + clear_lsb, data_swab, as, load_rom, sym_cb); } fail:hw/riscv/boot.c +1
-1@@ -119,7 +119,7 @@ target_ulong riscv_load_kernel(const char *kernel_filename, symbol_fn_t sym_cb)uint64_t kernel_entry, kernel_high;if (load_elf_ram_sym (kernel_filename,NULL ,NULL ,NULL , - &kernel_entry,NULL , &kernel_high,0 , + &kernel_entry,NULL , &kernel_high,NULL ,0 ,EM_RISCV ,1 ,0 ,NULL , true, sym_cb) >0 ) {return kernel_entry; }hw/Kconfig +1
-0@@ -43,6 +43,7 @@ source watchdog/Kconfig # arch Kconfig source arm/Kconfig source alpha/Kconfig +source avr/Kconfig source cris/Kconfig source hppa/Kconfig source i386/Kconfighw/avr/Kconfig new file +6
-0@@ -0,0 +1,6 @@ +config AVR_SAMPLE + bool + select AVR_TIMER16 + select AVR_USART + select AVR_MASK + select UNIMPhw/avr/Makefile.objs new file +1
-0@@ -0,0 +1 @@ +obj-y += sample.o
Re: [PATCH v39 15/22] target/avr: Add example board configuration
Hi Igor.
I don't find where machine->ram is defined.
Regards,
Michael Rolnik
Quoted 526 lines · Igor Mammedov
Quoted 1 line · On Wed, 18 Dec 2019 23:03:22 +0200 Michael Rolnik <[email protected]> wrote:
A simple board setup that configures an AVR CPU to run a given firmware
image.
Quoted 1 line
This is all that's useful to implement without peripheral emulation as
AVR CPUs include a lot of on-board peripherals.
Quoted 27 lines
NOTE: this is not a real board !!!!
NOTE: it's used for CPU testing!!!!Signed-off-by Michael Rolnik <[email protected]>Reviewed-by Aleksandar Markovic <[email protected]>--- include/elf.h | 2 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- hw/avr/sample.c | 293 +++++++++++++++++++++++++++++++++++++++++++ hw/core/loader.c | 15 +-- hw/riscv/boot.c | 2 +- hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + 9 files changed, 321 insertions(+), 11 deletions(-) create mode 100644 hw/avr/sample.c create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objsinclude/elf.h +0
-0include/elf.h typedef struct mips_elf_abiflags_v0 { · line 207
Quoted 6 lines
include/elf.h +2
-0@@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {#define EM_MOXIE 223/* Moxie processor family */ #define EM_MOXIE_OLD 0xFEED +#define EM_AVR 83/* AVR 8-bit microcontroller */ +/* This is the info that is needed to parse the dynamic section of the file */
include/hw/elf_ops.h static int glue(load_elf, SZ)(const char *name, int
Quoted 7 lines
include/elf.h +0
-0#define DT_NULL 0#define DT_NEEDED 1include/hw/elf_ops.h +0
-0@@ -316,7 +316,8 @@ static int glue(load_elf, SZ)(const char *name, intfd,
include/hw/elf_ops.h static int glue(load_elf, SZ)(const char *name, int fd,
Quoted 4 lines
include/hw/elf_ops.h +0
-1void *translate_opaque, int must_swab, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine, int clear_lsb, int
data_swab,include/hw/elf_ops.h static int glue(load_elf, SZ)(const char *name, int
Quoted 6 lines
include/hw/elf_ops.h +2
-0+ uint32_t *pe_flags, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) {@@ -594,6 +595,9 @@ static int glue(load_elf, SZ)(const char *name, intfd,
Quoted 22 lines
include/hw/elf_ops.h +3
-0} } +if (pe_flags) { + *pe_flags = (uint32_t )(elf_sword )ehdr.e_flags; + }if (lowaddr) *lowaddr = (uint64_t )(elf_sword )low;if (highaddr)include/hw/loader.h +1
-0@@ -101,6 +101,7 @@ const char *load_elf_strerror(int error);* @pentry: Populated with program entry point. Ignored if NULL. * @lowaddr: Populated with lowest loaded address. Ignored if NULL. * @highaddr: Populated with highest loaded address. Ignored if NULL. +* @pe_flags: Populated with e_flags. Ignore if NULL. * @bigendian: Expected ELF endianness. 0 for LE otherwise BE * @elf_machine: Expected ELF machine type * @clear_lsb: Set to mask off LSB of addresses (Some architectures use include/hw/loader.h int load_elf_ram_sym(const char *filename, · line 134
Quoted 4 lines
include/hw/loader.h +0
-1@@ -131,8 +132,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int
big_endian,include/hw/loader.h int load_elf_ram_sym(const char *filename, · line 135
Quoted 2 lines
include/hw/loader.h +1
-1- int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t
*pe_flags,include/hw/loader.h int load_elf_ram_sym(const char *filename,
Quoted 3 lines
include/hw/loader.h +2
-0+ int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t
sym_cb);Quoted 22 lines
include/hw/loader.h +0
-0/** load_elf_ram: hw/avr/sample.c new file +14
-0@@ -0,0 +1,293 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. hw/avr/sample.c line 24
Quoted 10 lines
hw/avr/sample.c new file +10
-0+* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +/* +* NOTE: +* This is not a real AVR board, this is an example! +* The CPU is an approximation of an ATmega2560, but is missing various
hw/avr/sample.c
Quoted 3 lines
hw/avr/sample.c new file +3
-0+* built-in peripherals. +* +* This example board loads provided binary file into flash memory and
Quoted 19 lines
hw/avr/sample.c new file +19
-0+* executes it from 0x00000000 address in the code memory space. +* +* Currently used for AVR CPU validation +* +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "cpu.h" +#include "hw/hw.h" +#include "sysemu/sysemu.h" +#include "sysemu/qtest.h" +#include "ui/console.h" +#include "hw/boards.h" +#include "hw/loader.h" +#include "qemu/error-report.h" +#include "exec/address-spaces.h" +#include "include/hw/sysbus.h" hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+#include "include/hw/char/avr_usart.h" +#include "include/hw/timer/avr_timer16.h" +#include "include/hw/misc/avr_mask.h" +#include "elf.h" +#include "hw/misc/unimp.h" + +#define SIZE_FLASH 0x00040000 +#define SIZE_SRAM 0x00002000 +/* +* Size of additional "external" memory, as if the AVR were configured to use
hw/avr/sample.c line 58
Quoted 2 lines
hw/avr/sample.c new file +2
-0+* an external RAM chip. +* Note that the configuration registers that normally enable this feature are
hw/avr/sample.c
Quoted 5 lines
hw/avr/sample.c new file +5
-0+* unimplemented. +*/ +#define SIZE_EXMEM 0x00000000 + +/* Offsets of peripherals in emulated memory space (i.e. not host addresses) */
Quoted 64 lines
hw/avr/sample.c new file +64
-0+#define PRR0_BASE 0x64 +#define PRR1_BASE 0x65 +#define USART_BASE 0xc0 +#define TIMER1_BASE 0x80 +#define TIMER1_IMSK_BASE 0x6f +#define TIMER1_IFR_BASE 0x36 + +/* Interrupt numbers used by peripherals */ +#define USART_RXC_IRQ 24 +#define USART_DRE_IRQ 25 +#define USART_TXC_IRQ 26 + +#define TIMER1_CAPT_IRQ 15 +#define TIMER1_COMPA_IRQ 16 +#define TIMER1_COMPB_IRQ 17 +#define TIMER1_COMPC_IRQ 18 +#define TIMER1_OVF_IRQ 19 + +/* Power reduction */ +#define PRR1_BIT_PRTIM5 0x05/* Timer/Counter5 */ +#define PRR1_BIT_PRTIM4 0x04/* Timer/Counter4 */ +#define PRR1_BIT_PRTIM3 0x03/* Timer/Counter3 */ +#define PRR1_BIT_PRUSART3 0x02/* USART3 */ +#define PRR1_BIT_PRUSART2 0x01/* USART2 */ +#define PRR1_BIT_PRUSART1 0x00/* USART1 */ + +#define PRR0_BIT_PRTWI 0x06/* TWI */ +#define PRR0_BIT_PRTIM2 0x05/* Timer/Counter2 */ +#define PRR0_BIT_PRTIM0 0x04/* Timer/Counter0 */ +#define PRR0_BIT_PRTIM1 0x03/* Timer/Counter1 */ +#define PRR0_BIT_PRSPI 0x02/* Serial Peripheral Interface */ +#define PRR0_BIT_PRUSART0 0x01/* USART0 */ +#define PRR0_BIT_PRADC 0x00/* ADC */ + +typedef struct { +MachineClass parent; +}SampleMachineClass ; + +typedef struct { +MachineState parent; +MemoryRegion *ram; +MemoryRegion *flash; +AVRUsartState *usart0; +AVRTimer16State *timer1; +AVRMaskState *prr[2 ]; +}SampleMachineState ; + +#define TYPE_SAMPLE_MACHINE MACHINE_TYPE_NAME("sample") + +#define SAMPLE_MACHINE (obj) \ + OBJECT_CHECK(SampleMachineState, obj, TYPE_SAMPLE_MACHINE) +#define SAMPLE_MACHINE_GET_CLASS (obj) \ + OBJECT_GET_CLASS(SampleMachineClass, obj, TYPE_SAMPLE_MACHINE) +#define SAMPLE_MACHINE_CLASS (klass) \ + OBJECT_CLASS_CHECK(SampleMachineClass, klass, TYPE_SAMPLE_MACHINE) + +static void sample_init (MachineState *machine) +{ +SampleMachineState *sms =SAMPLE_MACHINE (machine); +MemoryRegion *system_memory =get_system_memory (); +AVRCPU *cpu; +const char *firmware =NULL ; +const char *filename =NULL ; +const char *cpu_type =NULL ;hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+uint32_t e_flags; +int bytes_loaded; +SysBusDevice *busdev; +DeviceState *cpudev; + + system_memory =get_system_memory (); + sms->ram =g_new (MemoryRegion,1 ); + sms->flash =g_new (MemoryRegion,1 ); + +/* if ELF file is provided, determine CPU type reading ELF e_flags */
hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+ cpu_type = machine->cpu_type; + firmware = machine->firmware; +if (firmware !=NULL ) { + filename =qemu_find_file (QEMU_FILE_TYPE_BIOS , firmware); +if (filename ==NULL ) { +error_report ("Unable to find %s" , firmware); +exit (1 ); + } + + bytes_loaded = load_elf_ram_sym(filename, NULL, NULL, NULL,NULL, NULL,
Quoted 5 lines
hw/avr/sample.c new file +5
-0+ NULL, &e_flags, 0, EM_AVR, 0, 0, NULL, 0, 0); +if (bytes_loaded >0 ) { + cpu_type =avr_flags_to_cpu_type (e_flags, cpu_type); + } + }hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+ + cpu =AVR_CPU (cpu_create (cpu_type)); + cpudev =DEVICE (cpu); + +memory_region_init_rom (sms->flash,NULL ,"avr.flash" ,SIZE_FLASH , + &error_fatal); +memory_region_add_subregion (system_memory,OFFSET_CODE , sms->flash); + +/* following are atmel2560 device */ + create_unimplemented_device("usart 3", OFFSET_DATA + 0x0130,
0x0007);hw/avr/sample.c
Quoted 7 lines
hw/avr/sample.c new file +7
-0+create_unimplemented_device ("timer-counter-16bit 5" , +OFFSET_DATA +0x0120 ,0x000e ); +create_unimplemented_device ("gpio L" ,OFFSET_DATA +0x0109 ,0x0003 ); +create_unimplemented_device ("gpio K" ,OFFSET_DATA +0x0106 ,0x0003 ); +create_unimplemented_device ("gpio J" ,OFFSET_DATA +0x0103 ,0x0003 ); +create_unimplemented_device ("gpio H" ,OFFSET_DATA +0x0100 ,0x0003 ); + create_unimplemented_device("usart 2", OFFSET_DATA + 0x00d0,
0x0007);hw/avr/sample.c line 170
Quoted 1 line
hw/avr/sample.c new file +1
-0+ create_unimplemented_device("usart 1", OFFSET_DATA + 0x00c8,
0x0007);hw/avr/sample.c line 171
Quoted 1 line
hw/avr/sample.c new file +1
-0+ create_unimplemented_device("usart 0", OFFSET_DATA + 0x00c0,
0x0007);Quoted 27 lines
hw/avr/sample.c new file +27
-0+create_unimplemented_device ("twi" ,OFFSET_DATA +0x00b8 ,0x0006 ); +create_unimplemented_device ("timer-counter-async-8bit 2" , +OFFSET_DATA +0x00b0 ,0x0007 ); +create_unimplemented_device ("timer-counter-16bit 4" , +OFFSET_DATA +0x00a0 ,0x000e ); +create_unimplemented_device ("timer-counter-16bit 3" , +OFFSET_DATA +0x0090 ,0x000e ); +create_unimplemented_device ("timer-counter-16bit 1" , +OFFSET_DATA +0x0080 ,0x000e ); +create_unimplemented_device ("ac / adc" , +OFFSET_DATA +0x0078 ,0x0008 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x0074 ,0x0002 ); +create_unimplemented_device ("int-controller" , +OFFSET_DATA +0x0068 ,0x000c ); +create_unimplemented_device ("sys" , +OFFSET_DATA +0x0060 ,0x0007 ); +create_unimplemented_device ("spi" , +OFFSET_DATA +0x004c ,0x0003 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x004a ,0x0002 ); +create_unimplemented_device ("timer-counter-pwm-8bit 0" , +OFFSET_DATA +0x0043 ,0x0006 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x003e ,0x0005 ); +create_unimplemented_device ("int-controller" , +OFFSET_DATA +0x0035 ,0x0009 );hw/avr/sample.c line 208
Quoted 10 lines
hw/avr/sample.c new file +10
-0+create_unimplemented_device ("gpio G" ,OFFSET_DATA +0x0032 ,0x0003 ); +create_unimplemented_device ("gpio F" ,OFFSET_DATA +0x002f ,0x0003 ); +create_unimplemented_device ("gpio E" ,OFFSET_DATA +0x002c ,0x0003 ); +create_unimplemented_device ("gpio D" ,OFFSET_DATA +0x0029 ,0x0003 ); +create_unimplemented_device ("gpio C" ,OFFSET_DATA +0x0026 ,0x0003 ); +create_unimplemented_device ("gpio B" ,OFFSET_DATA +0x0023 ,0x0003 ); +create_unimplemented_device ("gpio A" ,OFFSET_DATA +0x0020 ,0x0003 ); + +memory_region_allocate_system_memory ( + sms->ram,NULL ,"avr.ram" ,SIZE_SRAM +SIZE_EXMEM );Please use
MachineClass::default_ram_sizeand add check that '-m' values matches it.
See for examplehttps://github.com/imammedo/qemu/commit/241c65d506ccba1e0239a2bc0632d7dc9c3517c1
(if you respin amend this patch but otherwise it could be a patch on top of this series)
hw/avr/sample.c line 209
Quoted 1 line
hw/avr/sample.c new file +1
-0+ memory_region_add_subregion(system_memory, OFFSET_DATA + 0x200,
sms->ram);Quoted 6 lines
hw/avr/sample.c new file +6
-0+ +/* Power Reduction built-in peripheral */ + sms->prr[0 ] =AVR_MASK (sysbus_create_simple (TYPE_AVR_MASK , +OFFSET_DATA +PRR0_BASE ,NULL )); + sms->prr[1 ] =AVR_MASK (sysbus_create_simple (TYPE_AVR_MASK , +OFFSET_DATA +PRR1_BASE ,NULL ));hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+ +/* USART 0 built-in peripheral */ + sms->usart0 =AVR_USART (object_new (TYPE_AVR_USART )); + busdev =SYS_BUS_DEVICE (sms->usart0); +qdev_prop_set_chr (DEVICE (sms->usart0),"chardev" ,serial_hd (0 )); +object_property_set_bool (OBJECT (sms->usart0), true,"realized" , + &error_fatal); +sysbus_mmio_map (busdev,0 ,OFFSET_DATA +USART_BASE ); +/* +* These IRQ numbers don't match the datasheet because we're counting from
hw/avr/sample.c
Quoted 3 lines
hw/avr/sample.c new file +3
-0+* zero and not including reset. +*/ + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(cpudev,
USART_RXC_IRQ));hw/avr/sample.c line 229
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(cpudev,
USART_DRE_IRQ));hw/avr/sample.c line 230
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(cpudev,
USART_TXC_IRQ));hw/avr/sample.c
Quoted 12 lines
hw/avr/sample.c new file +12
-0+sysbus_connect_irq (SYS_BUS_DEVICE (sms->prr[1 ]),PRR1_BIT_PRUSART1 , +qdev_get_gpio_in (DEVICE (sms->usart0),0 )); + +/* Timer 1 built-in periphal */ + sms->timer1 =AVR_TIMER16 (object_new (TYPE_AVR_TIMER16 )); +object_property_set_bool (OBJECT (sms->timer1), true,"realized" , + &error_fatal); + busdev =SYS_BUS_DEVICE (sms->timer1); +sysbus_mmio_map (busdev,0 ,OFFSET_DATA +TIMER1_BASE ); +sysbus_mmio_map (busdev,1 ,OFFSET_DATA +TIMER1_IMSK_BASE ); +sysbus_mmio_map (busdev,2 ,OFFSET_DATA +TIMER1_IFR_BASE ); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(cpudev,
TIMER1_CAPT_IRQ));hw/avr/sample.c line 243
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(cpudev,
TIMER1_COMPA_IRQ));hw/avr/sample.c line 244
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(cpudev,
TIMER1_COMPB_IRQ));hw/avr/sample.c line 245
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 3, qdev_get_gpio_in(cpudev,
TIMER1_COMPC_IRQ));hw/avr/sample.c line 246
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 4, qdev_get_gpio_in(cpudev,
TIMER1_OVF_IRQ));hw/avr/sample.c
Quoted 7 lines
hw/avr/sample.c new file +7
-0+sysbus_connect_irq (SYS_BUS_DEVICE (sms->prr[0 ]),PRR0_BIT_PRTIM1 , +qdev_get_gpio_in (DEVICE (sms->timer1),0 )); + +/* Load firmware (contents of flash) trying to auto-detect format */ +if (filename !=NULL ) { + bytes_loaded = load_elf( + filename, NULL, NULL, NULL, NULL, NULL, NULL, 0, EM_NONE,0, 0);
Quoted 54 lines
hw/avr/sample.c new file +40
-0+if (bytes_loaded <0 ) { + bytes_loaded =load_image_targphys ( + filename,OFFSET_CODE ,SIZE_FLASH ); + } +if (bytes_loaded <0 ) { +error_report ( +"Unable to load firmware image %s as ELF or raw binary" , + firmware); +exit (1 ); + } + } +} + +static void sample_class_init (ObjectClass *oc,void *data) +{ +MachineClass *mc =MACHINE_CLASS (oc); + + mc->desc ="AVR sample/example board (ATmega2560)" ; + mc->init = sample_init; + mc->default_cpus =1 ; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mc->default_cpu_type ="avr6-avr-cpu" ;/* ATmega2560. */ + mc->is_default =1 ; +} + +static const TypeInfo sample_info = { + .name =TYPE_SAMPLE_MACHINE , + .parent =TYPE_MACHINE , + .instance_size =sizeof (SampleMachineState), + .class_size =sizeof (SampleMachineClass), + .class_init = sample_class_init, +}; + +static void sample_machine_init (void ) +{ +type_register_static (&sample_info); +} + +type_init (sample_machine_init);hw/core/loader.c +1
-1@@ -438,7 +438,7 @@ int load_elf_ram(const char *filename, {return load_elf_ram_sym (filename, elf_note_fn, translate_fn, translate_opaque, - pentry, lowaddr, highaddr, big_endian, + pentry, lowaddr, highaddr,NULL , big_endian, elf_machine, clear_lsb, data_swab, as, load_rom,NULL ); }hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 451
Quoted 4 lines
hw/core/loader.c +0
-1@@ -448,8 +448,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int
big_endian,hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 451
Quoted 2 lines
hw/core/loader.c +1
-1- int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t
*pe_flags,hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 454
Quoted 3 lines
hw/core/loader.c +2
-0+ int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t
sym_cb)hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 456
Quoted 2 lines
hw/core/loader.c +0
-0{ int fd, data_order, target_data_order, must_swab, ret =
ELF_LOAD_FAILED;hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 493
Quoted 5 lines
hw/core/loader.c +0
-1@@ -490,13 +491,13 @@ int load_elf_ram_sym(const char *filename,if (e_ident[EI_CLASS ] ==ELFCLASS64 ) { ret = load_elf64(filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine,
clear_lsb,hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 494
Quoted 2 lines
hw/core/loader.c +1
-1- data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags,
elf_machine,hw/core/loader.c int load_elf_ram_sym(const char *filename,
Quoted 5 lines
hw/core/loader.c +1
-1+ clear_lsb, data_swab, as, load_rom, sym_cb); }else { ret = load_elf32(filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine,
clear_lsb,hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 499
Quoted 2 lines
hw/core/loader.c +1
-1- data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags,
elf_machine,hw/riscv/boot.c target_ulong riscv_load_kernel(const char
Quoted 9 lines
hw/core/loader.c +1
-0+ clear_lsb, data_swab, as, load_rom, sym_cb); } fail:hw/riscv/boot.c +0
-0@@ -119,7 +119,7 @@ target_ulong riscv_load_kernel(const char
*kernel_filename,symbol_fn_tsym_cb)Quoted 39 lines
hw/riscv/boot.c +1
-1uint64_t kernel_entry, kernel_high;if (load_elf_ram_sym (kernel_filename,NULL ,NULL ,NULL , - &kernel_entry,NULL , &kernel_high,0 , + &kernel_entry,NULL , &kernel_high,NULL ,0 ,EM_RISCV ,1 ,0 ,NULL , true, sym_cb) >0 ) {return kernel_entry; }hw/Kconfig +1
-0@@ -43,6 +43,7 @@ source watchdog/Kconfig # arch Kconfig source arm/Kconfig source alpha/Kconfig +source avr/Kconfig source cris/Kconfig source hppa/Kconfig source i386/Kconfighw/avr/Kconfig new file +6
-0@@ -0,0 +1,6 @@ +config AVR_SAMPLE + bool + select AVR_TIMER16 + select AVR_USART + select AVR_MASK + select UNIMPhw/avr/Makefile.objs new file +1
-0@@ -0,0 +1 @@ +obj-y += sample.o
Signature · 2 lines
Best Regards, Michael Rolnik
Re: [PATCH v39 15/22] target/avr: Add example board configuration
Quoted 3 lines · On Fri, 20 Dec 2019 14:30:47 +0200 Michael Rolnik <[email protected]> wrote:
Hi Igor.
I don't find where
machine->ramis defined.
It's not upstream yet (sorry for picking confusing example (there are others with machine->ram_size)).
so if you
s/memory_region_size(machine->ram)/machine->ram_size/
it will be enough to perform check.
Later on (in likely case this series gets merged before mine), I'll take care of
memory_region_allocate_system_memory() to machine->ram.
convertion
Quoted 533 lines
Regards,
Michael RolnikQuoted 526 lines · Igor Mammedov
Quoted 1 line · On Wed, 18 Dec 2019 23:03:22 +0200 Michael Rolnik <[email protected]> wrote:
A simple board setup that configures an AVR CPU to run a given firmware
image.
Quoted 1 line
This is all that's useful to implement without peripheral emulation as
AVR CPUs include a lot of on-board peripherals.
Quoted 27 lines
NOTE: this is not a real board !!!!
NOTE: it's used for CPU testing!!!!Signed-off-by Michael Rolnik <[email protected]>Reviewed-by Aleksandar Markovic <[email protected]>--- include/elf.h | 2 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- hw/avr/sample.c | 293 +++++++++++++++++++++++++++++++++++++++++++ hw/core/loader.c | 15 +-- hw/riscv/boot.c | 2 +- hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + 9 files changed, 321 insertions(+), 11 deletions(-) create mode 100644 hw/avr/sample.c create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objsinclude/elf.h +0
-0include/elf.h typedef struct mips_elf_abiflags_v0 { · line 207
Quoted 6 lines
include/elf.h +2
-0@@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {#define EM_MOXIE 223/* Moxie processor family */ #define EM_MOXIE_OLD 0xFEED +#define EM_AVR 83/* AVR 8-bit microcontroller */ +/* This is the info that is needed to parse the dynamic section of the file */
include/hw/elf_ops.h static int glue(load_elf, SZ)(const char *name, int
Quoted 7 lines
include/elf.h +0
-0#define DT_NULL 0#define DT_NEEDED 1include/hw/elf_ops.h +0
-0@@ -316,7 +316,8 @@ static int glue(load_elf, SZ)(const char *name, intfd,
include/hw/elf_ops.h static int glue(load_elf, SZ)(const char *name, int fd,
Quoted 4 lines
include/hw/elf_ops.h +0
-1void *translate_opaque, int must_swab, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine, int clear_lsb, int
data_swab,include/hw/elf_ops.h static int glue(load_elf, SZ)(const char *name, int
Quoted 6 lines
include/hw/elf_ops.h +2
-0+ uint32_t *pe_flags, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) {@@ -594,6 +595,9 @@ static int glue(load_elf, SZ)(const char *name, intfd,
Quoted 22 lines
include/hw/elf_ops.h +3
-0} } +if (pe_flags) { + *pe_flags = (uint32_t )(elf_sword )ehdr.e_flags; + }if (lowaddr) *lowaddr = (uint64_t )(elf_sword )low;if (highaddr)include/hw/loader.h +1
-0@@ -101,6 +101,7 @@ const char *load_elf_strerror(int error);* @pentry: Populated with program entry point. Ignored if NULL. * @lowaddr: Populated with lowest loaded address. Ignored if NULL. * @highaddr: Populated with highest loaded address. Ignored if NULL. +* @pe_flags: Populated with e_flags. Ignore if NULL. * @bigendian: Expected ELF endianness. 0 for LE otherwise BE * @elf_machine: Expected ELF machine type * @clear_lsb: Set to mask off LSB of addresses (Some architectures use include/hw/loader.h int load_elf_ram_sym(const char *filename, · line 134
Quoted 4 lines
include/hw/loader.h +0
-1@@ -131,8 +132,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int
big_endian,include/hw/loader.h int load_elf_ram_sym(const char *filename, · line 135
Quoted 2 lines
include/hw/loader.h +1
-1- int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t
*pe_flags,include/hw/loader.h int load_elf_ram_sym(const char *filename,
Quoted 3 lines
include/hw/loader.h +2
-0+ int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t
sym_cb);Quoted 22 lines
include/hw/loader.h +0
-0/** load_elf_ram: hw/avr/sample.c new file +14
-0@@ -0,0 +1,293 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. hw/avr/sample.c line 24
Quoted 10 lines
hw/avr/sample.c new file +10
-0+* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +/* +* NOTE: +* This is not a real AVR board, this is an example! +* The CPU is an approximation of an ATmega2560, but is missing various
hw/avr/sample.c
Quoted 3 lines
hw/avr/sample.c new file +3
-0+* built-in peripherals. +* +* This example board loads provided binary file into flash memory and
Quoted 19 lines
hw/avr/sample.c new file +19
-0+* executes it from 0x00000000 address in the code memory space. +* +* Currently used for AVR CPU validation +* +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "cpu.h" +#include "hw/hw.h" +#include "sysemu/sysemu.h" +#include "sysemu/qtest.h" +#include "ui/console.h" +#include "hw/boards.h" +#include "hw/loader.h" +#include "qemu/error-report.h" +#include "exec/address-spaces.h" +#include "include/hw/sysbus.h" hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+#include "include/hw/char/avr_usart.h" +#include "include/hw/timer/avr_timer16.h" +#include "include/hw/misc/avr_mask.h" +#include "elf.h" +#include "hw/misc/unimp.h" + +#define SIZE_FLASH 0x00040000 +#define SIZE_SRAM 0x00002000 +/* +* Size of additional "external" memory, as if the AVR were configured to use
hw/avr/sample.c line 58
Quoted 2 lines
hw/avr/sample.c new file +2
-0+* an external RAM chip. +* Note that the configuration registers that normally enable this feature are
hw/avr/sample.c
Quoted 5 lines
hw/avr/sample.c new file +5
-0+* unimplemented. +*/ +#define SIZE_EXMEM 0x00000000 + +/* Offsets of peripherals in emulated memory space (i.e. not host addresses) */
Quoted 64 lines
hw/avr/sample.c new file +64
-0+#define PRR0_BASE 0x64 +#define PRR1_BASE 0x65 +#define USART_BASE 0xc0 +#define TIMER1_BASE 0x80 +#define TIMER1_IMSK_BASE 0x6f +#define TIMER1_IFR_BASE 0x36 + +/* Interrupt numbers used by peripherals */ +#define USART_RXC_IRQ 24 +#define USART_DRE_IRQ 25 +#define USART_TXC_IRQ 26 + +#define TIMER1_CAPT_IRQ 15 +#define TIMER1_COMPA_IRQ 16 +#define TIMER1_COMPB_IRQ 17 +#define TIMER1_COMPC_IRQ 18 +#define TIMER1_OVF_IRQ 19 + +/* Power reduction */ +#define PRR1_BIT_PRTIM5 0x05/* Timer/Counter5 */ +#define PRR1_BIT_PRTIM4 0x04/* Timer/Counter4 */ +#define PRR1_BIT_PRTIM3 0x03/* Timer/Counter3 */ +#define PRR1_BIT_PRUSART3 0x02/* USART3 */ +#define PRR1_BIT_PRUSART2 0x01/* USART2 */ +#define PRR1_BIT_PRUSART1 0x00/* USART1 */ + +#define PRR0_BIT_PRTWI 0x06/* TWI */ +#define PRR0_BIT_PRTIM2 0x05/* Timer/Counter2 */ +#define PRR0_BIT_PRTIM0 0x04/* Timer/Counter0 */ +#define PRR0_BIT_PRTIM1 0x03/* Timer/Counter1 */ +#define PRR0_BIT_PRSPI 0x02/* Serial Peripheral Interface */ +#define PRR0_BIT_PRUSART0 0x01/* USART0 */ +#define PRR0_BIT_PRADC 0x00/* ADC */ + +typedef struct { +MachineClass parent; +}SampleMachineClass ; + +typedef struct { +MachineState parent; +MemoryRegion *ram; +MemoryRegion *flash; +AVRUsartState *usart0; +AVRTimer16State *timer1; +AVRMaskState *prr[2 ]; +}SampleMachineState ; + +#define TYPE_SAMPLE_MACHINE MACHINE_TYPE_NAME("sample") + +#define SAMPLE_MACHINE (obj) \ + OBJECT_CHECK(SampleMachineState, obj, TYPE_SAMPLE_MACHINE) +#define SAMPLE_MACHINE_GET_CLASS (obj) \ + OBJECT_GET_CLASS(SampleMachineClass, obj, TYPE_SAMPLE_MACHINE) +#define SAMPLE_MACHINE_CLASS (klass) \ + OBJECT_CLASS_CHECK(SampleMachineClass, klass, TYPE_SAMPLE_MACHINE) + +static void sample_init (MachineState *machine) +{ +SampleMachineState *sms =SAMPLE_MACHINE (machine); +MemoryRegion *system_memory =get_system_memory (); +AVRCPU *cpu; +const char *firmware =NULL ; +const char *filename =NULL ; +const char *cpu_type =NULL ;hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+uint32_t e_flags; +int bytes_loaded; +SysBusDevice *busdev; +DeviceState *cpudev; + + system_memory =get_system_memory (); + sms->ram =g_new (MemoryRegion,1 ); + sms->flash =g_new (MemoryRegion,1 ); + +/* if ELF file is provided, determine CPU type reading ELF e_flags */
hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+ cpu_type = machine->cpu_type; + firmware = machine->firmware; +if (firmware !=NULL ) { + filename =qemu_find_file (QEMU_FILE_TYPE_BIOS , firmware); +if (filename ==NULL ) { +error_report ("Unable to find %s" , firmware); +exit (1 ); + } + + bytes_loaded = load_elf_ram_sym(filename, NULL, NULL, NULL,NULL, NULL,
Quoted 5 lines
hw/avr/sample.c new file +5
-0+ NULL, &e_flags, 0, EM_AVR, 0, 0, NULL, 0, 0); +if (bytes_loaded >0 ) { + cpu_type =avr_flags_to_cpu_type (e_flags, cpu_type); + } + }hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+ + cpu =AVR_CPU (cpu_create (cpu_type)); + cpudev =DEVICE (cpu); + +memory_region_init_rom (sms->flash,NULL ,"avr.flash" ,SIZE_FLASH , + &error_fatal); +memory_region_add_subregion (system_memory,OFFSET_CODE , sms->flash); + +/* following are atmel2560 device */ + create_unimplemented_device("usart 3", OFFSET_DATA + 0x0130,
0x0007);hw/avr/sample.c
Quoted 7 lines
hw/avr/sample.c new file +7
-0+create_unimplemented_device ("timer-counter-16bit 5" , +OFFSET_DATA +0x0120 ,0x000e ); +create_unimplemented_device ("gpio L" ,OFFSET_DATA +0x0109 ,0x0003 ); +create_unimplemented_device ("gpio K" ,OFFSET_DATA +0x0106 ,0x0003 ); +create_unimplemented_device ("gpio J" ,OFFSET_DATA +0x0103 ,0x0003 ); +create_unimplemented_device ("gpio H" ,OFFSET_DATA +0x0100 ,0x0003 ); + create_unimplemented_device("usart 2", OFFSET_DATA + 0x00d0,
0x0007);hw/avr/sample.c line 170
Quoted 1 line
hw/avr/sample.c new file +1
-0+ create_unimplemented_device("usart 1", OFFSET_DATA + 0x00c8,
0x0007);hw/avr/sample.c line 171
Quoted 1 line
hw/avr/sample.c new file +1
-0+ create_unimplemented_device("usart 0", OFFSET_DATA + 0x00c0,
0x0007);Quoted 27 lines
hw/avr/sample.c new file +27
-0+create_unimplemented_device ("twi" ,OFFSET_DATA +0x00b8 ,0x0006 ); +create_unimplemented_device ("timer-counter-async-8bit 2" , +OFFSET_DATA +0x00b0 ,0x0007 ); +create_unimplemented_device ("timer-counter-16bit 4" , +OFFSET_DATA +0x00a0 ,0x000e ); +create_unimplemented_device ("timer-counter-16bit 3" , +OFFSET_DATA +0x0090 ,0x000e ); +create_unimplemented_device ("timer-counter-16bit 1" , +OFFSET_DATA +0x0080 ,0x000e ); +create_unimplemented_device ("ac / adc" , +OFFSET_DATA +0x0078 ,0x0008 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x0074 ,0x0002 ); +create_unimplemented_device ("int-controller" , +OFFSET_DATA +0x0068 ,0x000c ); +create_unimplemented_device ("sys" , +OFFSET_DATA +0x0060 ,0x0007 ); +create_unimplemented_device ("spi" , +OFFSET_DATA +0x004c ,0x0003 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x004a ,0x0002 ); +create_unimplemented_device ("timer-counter-pwm-8bit 0" , +OFFSET_DATA +0x0043 ,0x0006 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x003e ,0x0005 ); +create_unimplemented_device ("int-controller" , +OFFSET_DATA +0x0035 ,0x0009 );hw/avr/sample.c line 208
Quoted 10 lines
hw/avr/sample.c new file +10
-0+create_unimplemented_device ("gpio G" ,OFFSET_DATA +0x0032 ,0x0003 ); +create_unimplemented_device ("gpio F" ,OFFSET_DATA +0x002f ,0x0003 ); +create_unimplemented_device ("gpio E" ,OFFSET_DATA +0x002c ,0x0003 ); +create_unimplemented_device ("gpio D" ,OFFSET_DATA +0x0029 ,0x0003 ); +create_unimplemented_device ("gpio C" ,OFFSET_DATA +0x0026 ,0x0003 ); +create_unimplemented_device ("gpio B" ,OFFSET_DATA +0x0023 ,0x0003 ); +create_unimplemented_device ("gpio A" ,OFFSET_DATA +0x0020 ,0x0003 ); + +memory_region_allocate_system_memory ( + sms->ram,NULL ,"avr.ram" ,SIZE_SRAM +SIZE_EXMEM );Please use
MachineClass::default_ram_sizeand add check that '-m' values matches it.
See for examplehttps://github.com/imammedo/qemu/commit/241c65d506ccba1e0239a2bc0632d7dc9c3517c1
(if you respin amend this patch but otherwise it could be a patch on top of this series)
hw/avr/sample.c line 209
Quoted 1 line
hw/avr/sample.c new file +1
-0+ memory_region_add_subregion(system_memory, OFFSET_DATA + 0x200,
sms->ram);Quoted 6 lines
hw/avr/sample.c new file +6
-0+ +/* Power Reduction built-in peripheral */ + sms->prr[0 ] =AVR_MASK (sysbus_create_simple (TYPE_AVR_MASK , +OFFSET_DATA +PRR0_BASE ,NULL )); + sms->prr[1 ] =AVR_MASK (sysbus_create_simple (TYPE_AVR_MASK , +OFFSET_DATA +PRR1_BASE ,NULL ));hw/avr/sample.c
Quoted 10 lines
hw/avr/sample.c new file +10
-0+ +/* USART 0 built-in peripheral */ + sms->usart0 =AVR_USART (object_new (TYPE_AVR_USART )); + busdev =SYS_BUS_DEVICE (sms->usart0); +qdev_prop_set_chr (DEVICE (sms->usart0),"chardev" ,serial_hd (0 )); +object_property_set_bool (OBJECT (sms->usart0), true,"realized" , + &error_fatal); +sysbus_mmio_map (busdev,0 ,OFFSET_DATA +USART_BASE ); +/* +* These IRQ numbers don't match the datasheet because we're counting from
hw/avr/sample.c
Quoted 3 lines
hw/avr/sample.c new file +3
-0+* zero and not including reset. +*/ + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(cpudev,
USART_RXC_IRQ));hw/avr/sample.c line 229
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(cpudev,
USART_DRE_IRQ));hw/avr/sample.c line 230
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(cpudev,
USART_TXC_IRQ));hw/avr/sample.c
Quoted 12 lines
hw/avr/sample.c new file +12
-0+sysbus_connect_irq (SYS_BUS_DEVICE (sms->prr[1 ]),PRR1_BIT_PRUSART1 , +qdev_get_gpio_in (DEVICE (sms->usart0),0 )); + +/* Timer 1 built-in periphal */ + sms->timer1 =AVR_TIMER16 (object_new (TYPE_AVR_TIMER16 )); +object_property_set_bool (OBJECT (sms->timer1), true,"realized" , + &error_fatal); + busdev =SYS_BUS_DEVICE (sms->timer1); +sysbus_mmio_map (busdev,0 ,OFFSET_DATA +TIMER1_BASE ); +sysbus_mmio_map (busdev,1 ,OFFSET_DATA +TIMER1_IMSK_BASE ); +sysbus_mmio_map (busdev,2 ,OFFSET_DATA +TIMER1_IFR_BASE ); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(cpudev,
TIMER1_CAPT_IRQ));hw/avr/sample.c line 243
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(cpudev,
TIMER1_COMPA_IRQ));hw/avr/sample.c line 244
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(cpudev,
TIMER1_COMPB_IRQ));hw/avr/sample.c line 245
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 3, qdev_get_gpio_in(cpudev,
TIMER1_COMPC_IRQ));hw/avr/sample.c line 246
Quoted 1 line
hw/avr/sample.c new file +1
-0+ sysbus_connect_irq(busdev, 4, qdev_get_gpio_in(cpudev,
TIMER1_OVF_IRQ));hw/avr/sample.c
Quoted 7 lines
hw/avr/sample.c new file +7
-0+sysbus_connect_irq (SYS_BUS_DEVICE (sms->prr[0 ]),PRR0_BIT_PRTIM1 , +qdev_get_gpio_in (DEVICE (sms->timer1),0 )); + +/* Load firmware (contents of flash) trying to auto-detect format */ +if (filename !=NULL ) { + bytes_loaded = load_elf( + filename, NULL, NULL, NULL, NULL, NULL, NULL, 0, EM_NONE,0, 0);
Quoted 54 lines
hw/avr/sample.c new file +40
-0+if (bytes_loaded <0 ) { + bytes_loaded =load_image_targphys ( + filename,OFFSET_CODE ,SIZE_FLASH ); + } +if (bytes_loaded <0 ) { +error_report ( +"Unable to load firmware image %s as ELF or raw binary" , + firmware); +exit (1 ); + } + } +} + +static void sample_class_init (ObjectClass *oc,void *data) +{ +MachineClass *mc =MACHINE_CLASS (oc); + + mc->desc ="AVR sample/example board (ATmega2560)" ; + mc->init = sample_init; + mc->default_cpus =1 ; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mc->default_cpu_type ="avr6-avr-cpu" ;/* ATmega2560. */ + mc->is_default =1 ; +} + +static const TypeInfo sample_info = { + .name =TYPE_SAMPLE_MACHINE , + .parent =TYPE_MACHINE , + .instance_size =sizeof (SampleMachineState), + .class_size =sizeof (SampleMachineClass), + .class_init = sample_class_init, +}; + +static void sample_machine_init (void ) +{ +type_register_static (&sample_info); +} + +type_init (sample_machine_init);hw/core/loader.c +1
-1@@ -438,7 +438,7 @@ int load_elf_ram(const char *filename, {return load_elf_ram_sym (filename, elf_note_fn, translate_fn, translate_opaque, - pentry, lowaddr, highaddr, big_endian, + pentry, lowaddr, highaddr,NULL , big_endian, elf_machine, clear_lsb, data_swab, as, load_rom,NULL ); }hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 451
Quoted 4 lines
hw/core/loader.c +0
-1@@ -448,8 +448,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int
big_endian,hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 451
Quoted 2 lines
hw/core/loader.c +1
-1- int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t
*pe_flags,hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 454
Quoted 3 lines
hw/core/loader.c +2
-0+ int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t
sym_cb)hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 456
Quoted 2 lines
hw/core/loader.c +0
-0{ int fd, data_order, target_data_order, must_swab, ret =
ELF_LOAD_FAILED;hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 493
Quoted 5 lines
hw/core/loader.c +0
-1@@ -490,13 +491,13 @@ int load_elf_ram_sym(const char *filename,if (e_ident[EI_CLASS ] ==ELFCLASS64 ) { ret = load_elf64(filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine,
clear_lsb,hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 494
Quoted 2 lines
hw/core/loader.c +1
-1- data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags,
elf_machine,hw/core/loader.c int load_elf_ram_sym(const char *filename,
Quoted 5 lines
hw/core/loader.c +1
-1+ clear_lsb, data_swab, as, load_rom, sym_cb); }else { ret = load_elf32(filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine,
clear_lsb,hw/core/loader.c int load_elf_ram_sym(const char *filename, · line 499
Quoted 2 lines
hw/core/loader.c +1
-1- data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags,
elf_machine,hw/riscv/boot.c target_ulong riscv_load_kernel(const char
Quoted 9 lines
hw/core/loader.c +1
-0+ clear_lsb, data_swab, as, load_rom, sym_cb); } fail:hw/riscv/boot.c +0
-0@@ -119,7 +119,7 @@ target_ulong riscv_load_kernel(const char
*kernel_filename,symbol_fn_tsym_cb)Quoted 39 lines
hw/riscv/boot.c +1
-1uint64_t kernel_entry, kernel_high;if (load_elf_ram_sym (kernel_filename,NULL ,NULL ,NULL , - &kernel_entry,NULL , &kernel_high,0 , + &kernel_entry,NULL , &kernel_high,NULL ,0 ,EM_RISCV ,1 ,0 ,NULL , true, sym_cb) >0 ) {return kernel_entry; }hw/Kconfig +1
-0@@ -43,6 +43,7 @@ source watchdog/Kconfig # arch Kconfig source arm/Kconfig source alpha/Kconfig +source avr/Kconfig source cris/Kconfig source hppa/Kconfig source i386/Kconfighw/avr/Kconfig new file +6
-0@@ -0,0 +1,6 @@ +config AVR_SAMPLE + bool + select AVR_TIMER16 + select AVR_USART + select AVR_MASK + select UNIMPhw/avr/Makefile.objs new file +1
-0@@ -0,0 +1 @@ +obj-y += sample.o
Re: [PATCH v39 15/22] target/avr: Add example board configuration
In reply to Michael RolnikHi Michael,
Few minor comments below.
Quoted 252 lines · Michael Rolnik
A simple board setup that configures an AVR CPU to run a given firmware image.
This is all that's useful to implement without peripheral emulation as AVR CPUs include a lot of on-board peripherals.NOTE: this is not a real board !!!!
NOTE: it's used for CPU testing!!!!Signed-off-by Michael Rolnik <[email protected]>Reviewed-by Aleksandar Markovic <[email protected]>--- include/elf.h | 2 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- hw/avr/sample.c | 293 +++++++++++++++++++++++++++++++++++++++++++ hw/core/loader.c | 15 +-- hw/riscv/boot.c | 2 +- hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + 9 files changed, 321 insertions(+), 11 deletions(-)create mode 100644
hw/avr/sample.c
create mode 100644 hw/avr/Kconfig
create mode 100644 hw/avr/Makefile.objsinclude/elf.h +2
-0@@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {#define EM_MOXIE 223/* Moxie processor family */ #define EM_MOXIE_OLD 0xFEED +#define EM_AVR 83/* AVR 8-bit microcontroller */ +/* This is the info that is needed to parse the dynamic section of the file */ #define DT_NULL 0#define DT_NEEDED 1include/hw/elf_ops.h +5
-1@@ -316,7 +316,8 @@ static int glue(load_elf, SZ)(const char *name, int fd,void *translate_opaque, int must_swab, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine, int clear_lsb, int data_swab, + uint32_t *pe_flags, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) {@@ -594,6 +595,9 @@ static int glue(load_elf, SZ)(const char *name, int fd, } } +if (pe_flags) { + *pe_flags = (uint32_t )(elf_sword )ehdr.e_flags; + }if (lowaddr) *lowaddr = (uint64_t )(elf_sword )low;if (highaddr)include/hw/loader.h +4
-2@@ -101,6 +101,7 @@ const char *load_elf_strerror(int error);* @pentry: Populated with program entry point. Ignored if NULL. * @lowaddr: Populated with lowest loaded address. Ignored if NULL. * @highaddr: Populated with highest loaded address. Ignored if NULL. +* @pe_flags: Populated with e_flags. Ignore if NULL. * @bigendian: Expected ELF endianness. 0 for LE otherwise BE * @elf_machine: Expected ELF machine type * @clear_lsb: Set to mask off LSB of addresses (Some architectures use @@ -131,8 +132,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int big_endian, - int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t *pe_flags, + int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb);/** load_elf_ram: hw/avr/sample.c new file +161
-0@@ -0,0 +1,293 @@ +/* +* QEMU AVR CPU +* +* Copyright (c) 2019 Michael Rolnik +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see +* <http://www.gnu.org/licenses/lgpl-2.1.html> +*/ + +/* +* NOTE: +* This is not a real AVR board, this is an example! +* The CPU is an approximation of an ATmega2560, but is missing various +* built-in peripherals. +* +* This example board loads provided binary file into flash memory and +* executes it from 0x00000000 address in the code memory space. +* +* Currently used for AVR CPU validation +* +*/ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu-common.h" +#include "cpu.h" +#include "hw/hw.h" +#include "sysemu/sysemu.h" +#include "sysemu/qtest.h" +#include "ui/console.h" +#include "hw/boards.h" +#include "hw/loader.h" +#include "qemu/error-report.h" +#include "exec/address-spaces.h" +#include "include/hw/sysbus.h" +#include "include/hw/char/avr_usart.h" +#include "include/hw/timer/avr_timer16.h" +#include "include/hw/misc/avr_mask.h" +#include "elf.h" +#include "hw/misc/unimp.h" + +#define SIZE_FLASH 0x00040000 +#define SIZE_SRAM 0x00002000 +/* +* Size of additional "external" memory, as if the AVR were configured to use +* an external RAM chip. +* Note that the configuration registers that normally enable this feature are +* unimplemented. +*/ +#define SIZE_EXMEM 0x00000000 + +/* Offsets of peripherals in emulated memory space (i.e. not host addresses) */ +#define PRR0_BASE 0x64 +#define PRR1_BASE 0x65 +#define USART_BASE 0xc0 +#define TIMER1_BASE 0x80 +#define TIMER1_IMSK_BASE 0x6f +#define TIMER1_IFR_BASE 0x36 + +/* Interrupt numbers used by peripherals */ +#define USART_RXC_IRQ 24 +#define USART_DRE_IRQ 25 +#define USART_TXC_IRQ 26 + +#define TIMER1_CAPT_IRQ 15 +#define TIMER1_COMPA_IRQ 16 +#define TIMER1_COMPB_IRQ 17 +#define TIMER1_COMPC_IRQ 18 +#define TIMER1_OVF_IRQ 19 + +/* Power reduction */ +#define PRR1_BIT_PRTIM5 0x05/* Timer/Counter5 */ +#define PRR1_BIT_PRTIM4 0x04/* Timer/Counter4 */ +#define PRR1_BIT_PRTIM3 0x03/* Timer/Counter3 */ +#define PRR1_BIT_PRUSART3 0x02/* USART3 */ +#define PRR1_BIT_PRUSART2 0x01/* USART2 */ +#define PRR1_BIT_PRUSART1 0x00/* USART1 */ + +#define PRR0_BIT_PRTWI 0x06/* TWI */ +#define PRR0_BIT_PRTIM2 0x05/* Timer/Counter2 */ +#define PRR0_BIT_PRTIM0 0x04/* Timer/Counter0 */ +#define PRR0_BIT_PRTIM1 0x03/* Timer/Counter1 */ +#define PRR0_BIT_PRSPI 0x02/* Serial Peripheral Interface */ +#define PRR0_BIT_PRUSART0 0x01/* USART0 */ +#define PRR0_BIT_PRADC 0x00/* ADC */ + +typedef struct { +MachineClass parent; +}SampleMachineClass ; + +typedef struct { +MachineState parent; +MemoryRegion *ram; +MemoryRegion *flash; +AVRUsartState *usart0; +AVRTimer16State *timer1; +AVRMaskState *prr[2 ]; +}SampleMachineState ; + +#define TYPE_SAMPLE_MACHINE MACHINE_TYPE_NAME("sample") + +#define SAMPLE_MACHINE (obj) \ + OBJECT_CHECK(SampleMachineState, obj, TYPE_SAMPLE_MACHINE) +#define SAMPLE_MACHINE_GET_CLASS (obj) \ + OBJECT_GET_CLASS(SampleMachineClass, obj, TYPE_SAMPLE_MACHINE) +#define SAMPLE_MACHINE_CLASS (klass) \ + OBJECT_CLASS_CHECK(SampleMachineClass, klass, TYPE_SAMPLE_MACHINE) + +static void sample_init (MachineState *machine) +{ +SampleMachineState *sms =SAMPLE_MACHINE (machine); +MemoryRegion *system_memory =get_system_memory (); +AVRCPU *cpu; +const char *firmware =NULL ; +const char *filename =NULL ; +const char *cpu_type =NULL ; +uint32_t e_flags; +int bytes_loaded; +SysBusDevice *busdev; +DeviceState *cpudev; + + system_memory =get_system_memory (); + sms->ram =g_new (MemoryRegion,1 ); + sms->flash =g_new (MemoryRegion,1 ); + +/* if ELF file is provided, determine CPU type reading ELF e_flags */ + cpu_type = machine->cpu_type; + firmware = machine->firmware; +if (firmware !=NULL ) { + filename =qemu_find_file (QEMU_FILE_TYPE_BIOS , firmware); +if (filename ==NULL ) { +error_report ("Unable to find %s" , firmware); +exit (1 ); + } + + bytes_loaded =load_elf_ram_sym (filename,NULL ,NULL ,NULL ,NULL ,NULL , +NULL , &e_flags,0 ,EM_AVR ,0 ,0 ,NULL ,0 ,0 ); +if (bytes_loaded >0 ) { + cpu_type =avr_flags_to_cpu_type (e_flags, cpu_type); + } + } + + cpu =AVR_CPU (cpu_create (cpu_type)); + cpudev =DEVICE (cpu); + +memory_region_init_rom (sms->flash,NULL ,"avr.flash" ,SIZE_FLASH , + &error_fatal); +memory_region_add_subregion (system_memory,OFFSET_CODE , sms->flash); + +/* following are atmel2560 device */
hw/avr/sample.c line 171
Quoted 10 lines
hw/avr/sample.c new file +10
-0+create_unimplemented_device ("usart 3" ,OFFSET_DATA +0x0130 ,0x0007 ); +create_unimplemented_device ("timer-counter-16bit 5" , +OFFSET_DATA +0x0120 ,0x000e ); +create_unimplemented_device ("gpio L" ,OFFSET_DATA +0x0109 ,0x0003 ); +create_unimplemented_device ("gpio K" ,OFFSET_DATA +0x0106 ,0x0003 ); +create_unimplemented_device ("gpio J" ,OFFSET_DATA +0x0103 ,0x0003 ); +create_unimplemented_device ("gpio H" ,OFFSET_DATA +0x0100 ,0x0003 ); +create_unimplemented_device ("usart 2" ,OFFSET_DATA +0x00d0 ,0x0007 ); +create_unimplemented_device ("usart 1" ,OFFSET_DATA +0x00c8 ,0x0007 ); +create_unimplemented_device ("usart 0" ,OFFSET_DATA +0x00c0 ,0x0007 );
"usart 0" is already mapped.
hw/avr/sample.c line 180
Quoted 9 lines
hw/avr/sample.c new file +9
-0+create_unimplemented_device ("twi" ,OFFSET_DATA +0x00b8 ,0x0006 ); +create_unimplemented_device ("timer-counter-async-8bit 2" , +OFFSET_DATA +0x00b0 ,0x0007 ); +create_unimplemented_device ("timer-counter-16bit 4" , +OFFSET_DATA +0x00a0 ,0x000e ); +create_unimplemented_device ("timer-counter-16bit 3" , +OFFSET_DATA +0x0090 ,0x000e ); +create_unimplemented_device ("timer-counter-16bit 1" , +OFFSET_DATA +0x0080 ,0x000e );
"timer-counter-16bit 1" is already mapped.
hw/avr/sample.c line 186
Quoted 6 lines
hw/avr/sample.c new file +6
-0+create_unimplemented_device ("ac / adc" , +OFFSET_DATA +0x0078 ,0x0008 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x0074 ,0x0002 ); +create_unimplemented_device ("int-controller" , +OFFSET_DATA +0x0068 ,0x000c );
..., OFFSET_DATA + 0x0068, 0x0006);
hw/avr/sample.c line 194
Quoted 8 lines
hw/avr/sample.c new file +8
-0+create_unimplemented_device ("sys" , +OFFSET_DATA +0x0060 ,0x0007 ); +create_unimplemented_device ("spi" , +OFFSET_DATA +0x004c ,0x0003 ); +create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x004a ,0x0002 ); +create_unimplemented_device ("timer-counter-pwm-8bit 0" , +OFFSET_DATA +0x0043 ,0x0006 );
Per the DS:
..., OFFSET_DATA + 0x0044, 0x0005)
Quoted 31 lines
hw/avr/sample.c new file +31
-0+create_unimplemented_device ("ext-mem-iface" , +OFFSET_DATA +0x003e ,0x0005 ); +create_unimplemented_device ("int-controller" , +OFFSET_DATA +0x0035 ,0x0009 ); +create_unimplemented_device ("gpio G" ,OFFSET_DATA +0x0032 ,0x0003 ); +create_unimplemented_device ("gpio F" ,OFFSET_DATA +0x002f ,0x0003 ); +create_unimplemented_device ("gpio E" ,OFFSET_DATA +0x002c ,0x0003 ); +create_unimplemented_device ("gpio D" ,OFFSET_DATA +0x0029 ,0x0003 ); +create_unimplemented_device ("gpio C" ,OFFSET_DATA +0x0026 ,0x0003 ); +create_unimplemented_device ("gpio B" ,OFFSET_DATA +0x0023 ,0x0003 ); +create_unimplemented_device ("gpio A" ,OFFSET_DATA +0x0020 ,0x0003 ); + +memory_region_allocate_system_memory ( + sms->ram,NULL ,"avr.ram" ,SIZE_SRAM +SIZE_EXMEM ); +memory_region_add_subregion (system_memory,OFFSET_DATA +0x200 , sms->ram); + +/* Power Reduction built-in peripheral */ + sms->prr[0 ] =AVR_MASK (sysbus_create_simple (TYPE_AVR_MASK , +OFFSET_DATA +PRR0_BASE ,NULL )); + sms->prr[1 ] =AVR_MASK (sysbus_create_simple (TYPE_AVR_MASK , +OFFSET_DATA +PRR1_BASE ,NULL )); + +/* USART 0 built-in peripheral */ + sms->usart0 =AVR_USART (object_new (TYPE_AVR_USART )); + busdev =SYS_BUS_DEVICE (sms->usart0); +qdev_prop_set_chr (DEVICE (sms->usart0),"chardev" ,serial_hd (0 )); +object_property_set_bool (OBJECT (sms->usart0), true,"realized" , + &error_fatal); +sysbus_mmio_map (busdev,0 ,OFFSET_DATA +USART_BASE ); +/* +* These IRQ numbers don't match the datasheet because we're counting from
hw/avr/sample.c line 235
Quoted 10 lines
hw/avr/sample.c new file +10
-0+* zero and not including reset. +*/ +sysbus_connect_irq (busdev,0 ,qdev_get_gpio_in (cpudev,USART_RXC_IRQ )); +sysbus_connect_irq (busdev,1 ,qdev_get_gpio_in (cpudev,USART_DRE_IRQ )); +sysbus_connect_irq (busdev,2 ,qdev_get_gpio_in (cpudev,USART_TXC_IRQ )); +sysbus_connect_irq (SYS_BUS_DEVICE (sms->prr[1 ]),PRR1_BIT_PRUSART1 , +qdev_get_gpio_in (DEVICE (sms->usart0),0 )); + +/* Timer 1 built-in periphal */ + sms->timer1 =AVR_TIMER16 (object_new (TYPE_AVR_TIMER16 ));
IIUC, here you create the timer with a default value of 20MHz:
static Property avr_timer16_properties[] = {
DEFINE_PROP_UINT8("id", struct AVRTimer16State, id, 0),
DEFINE_PROP_UINT64("cpu-frequency-hz", struct AVRTimer16State,
cpu_freq_hz, 20000000),
DEFINE_PROP_END_OF_LIST(),
};Then then the test you run is compiled for a 16MHz timer:
#define configCPU_CLOCK_HZ ( ( unsigned long ) 16000000 )
So I guess your sample board misses:
object_property_set_uint(OBJECT(sms->timer1), 16000000,
"cpu-frequency-hz", &error_abort);Quoted 31 lines
hw/avr/sample.c new file +31
-0+object_property_set_bool (OBJECT (sms->timer1), true,"realized" , + &error_fatal); + busdev =SYS_BUS_DEVICE (sms->timer1); +sysbus_mmio_map (busdev,0 ,OFFSET_DATA +TIMER1_BASE ); +sysbus_mmio_map (busdev,1 ,OFFSET_DATA +TIMER1_IMSK_BASE ); +sysbus_mmio_map (busdev,2 ,OFFSET_DATA +TIMER1_IFR_BASE ); +sysbus_connect_irq (busdev,0 ,qdev_get_gpio_in (cpudev,TIMER1_CAPT_IRQ )); +sysbus_connect_irq (busdev,1 ,qdev_get_gpio_in (cpudev,TIMER1_COMPA_IRQ )); +sysbus_connect_irq (busdev,2 ,qdev_get_gpio_in (cpudev,TIMER1_COMPB_IRQ )); +sysbus_connect_irq (busdev,3 ,qdev_get_gpio_in (cpudev,TIMER1_COMPC_IRQ )); +sysbus_connect_irq (busdev,4 ,qdev_get_gpio_in (cpudev,TIMER1_OVF_IRQ )); +sysbus_connect_irq (SYS_BUS_DEVICE (sms->prr[0 ]),PRR0_BIT_PRTIM1 , +qdev_get_gpio_in (DEVICE (sms->timer1),0 )); + +/* Load firmware (contents of flash) trying to auto-detect format */ +if (filename !=NULL ) { + bytes_loaded =load_elf ( + filename,NULL ,NULL ,NULL ,NULL ,NULL ,NULL ,0 ,EM_NONE ,0 ,0 ); +if (bytes_loaded <0 ) { + bytes_loaded =load_image_targphys ( + filename,OFFSET_CODE ,SIZE_FLASH ); + } +if (bytes_loaded <0 ) { +error_report ( +"Unable to load firmware image %s as ELF or raw binary" , + firmware); +exit (1 ); + } + } +} +
hw/avr/sample.c line 276
Quoted 10 lines
hw/avr/sample.c new file +10
-0+static void sample_class_init (ObjectClass *oc,void *data) +{ +MachineClass *mc =MACHINE_CLASS (oc); + + mc->desc ="AVR sample/example board (ATmega2560)" ; + mc->init = sample_init; + mc->default_cpus =1 ; + mc->min_cpus = mc->default_cpus; + mc->max_cpus = mc->default_cpus; + mc->default_cpu_type ="avr6-avr-cpu" ;/* ATmega2560. */
Please use AVR_CPU_TYPE_NAME("avr6").
Quoted 105 lines
hw/avr/sample.c new file +17
-0+ mc->is_default =1 ; +} + +static const TypeInfo sample_info = { + .name =TYPE_SAMPLE_MACHINE , + .parent =TYPE_MACHINE , + .instance_size =sizeof (SampleMachineState), + .class_size =sizeof (SampleMachineClass), + .class_init = sample_class_init, +}; + +static void sample_machine_init (void ) +{ +type_register_static (&sample_info); +} + +type_init (sample_machine_init);hw/core/loader.c +8
-7@@ -438,7 +438,7 @@ int load_elf_ram(const char *filename, {return load_elf_ram_sym (filename, elf_note_fn, translate_fn, translate_opaque, - pentry, lowaddr, highaddr, big_endian, + pentry, lowaddr, highaddr,NULL , big_endian, elf_machine, clear_lsb, data_swab, as, load_rom,NULL ); }@@ -448,8 +448,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int big_endian, - int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t *pe_flags, + int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) { int fd, data_order, target_data_order, must_swab, ret = ELF_LOAD_FAILED;@@ -490,13 +491,13 @@ int load_elf_ram_sym(const char *filename,if (e_ident[EI_CLASS ] ==ELFCLASS64 ) { ret =load_elf64 (filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine, clear_lsb, - data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags, elf_machine, + clear_lsb, data_swab, as, load_rom, sym_cb); }else { ret =load_elf32 (filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine, clear_lsb, - data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags, elf_machine, + clear_lsb, data_swab, as, load_rom, sym_cb); } fail:hw/riscv/boot.c +1
-1@@ -119,7 +119,7 @@ target_ulong riscv_load_kernel(const char *kernel_filename, symbol_fn_t sym_cb)uint64_t kernel_entry, kernel_high;if (load_elf_ram_sym (kernel_filename,NULL ,NULL ,NULL , - &kernel_entry,NULL , &kernel_high,0 , + &kernel_entry,NULL , &kernel_high,NULL ,0 ,EM_RISCV ,1 ,0 ,NULL , true, sym_cb) >0 ) {return kernel_entry; }hw/Kconfig +1
-0@@ -43,6 +43,7 @@ source watchdog/Kconfig # arch Kconfig source arm/Kconfig source alpha/Kconfig +source avr/Kconfig source cris/Kconfig source hppa/Kconfig source i386/Kconfighw/avr/Kconfig new file +6
-0@@ -0,0 +1,6 @@ +config AVR_SAMPLE + bool + select AVR_TIMER16 + select AVR_USART + select AVR_MASK + select UNIMPhw/avr/Makefile.objs new file +1
-0@@ -0,0 +1 @@ +obj-y += sample.o
Re: [PATCH v39 15/22] target/avr: Add example board configuration
In reply to Michael RolnikQuoted 10 lines · Michael Rolnik
A simple board setup that configures an AVR CPU to run a given firmware image.
This is all that's useful to implement without peripheral emulation as AVR CPUs include a lot of on-board peripherals.NOTE: this is not a real board !!!!
NOTE: it's used for CPU testing!!!!Signed-off-by Michael Rolnik <[email protected]>Reviewed-by Aleksandar Markovic <[email protected]>
Quoted 6 lines
--- include/elf.h | 2 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- hw/core/loader.c | 15 +-- hw/riscv/boot.c | 2 +-
Previous changes aren't AVR specific and should go in a separate patch. (and require review from all the maintainers of the other architectures affected by this change).
You can send send a single patch (not the whole series), else I'll see if I can split it myself.
Quoted 70 lines
hw/avr/sample.c | 293 +++++++++++++++++++++++++++++++++++++++++++ hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + 9 files changed, 321 insertions(+), 11 deletions(-) create mode 100644 hw/avr/sample.c create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objsinclude/elf.h +2
-0@@ -202,6 +202,8 @@ typedef struct mips_elf_abiflags_v0 {#define EM_MOXIE 223/* Moxie processor family */ #define EM_MOXIE_OLD 0xFEED +#define EM_AVR 83/* AVR 8-bit microcontroller */ +/* This is the info that is needed to parse the dynamic section of the file */ #define DT_NULL 0#define DT_NEEDED 1include/hw/elf_ops.h +5
-1@@ -316,7 +316,8 @@ static int glue(load_elf, SZ)(const char *name, int fd,void *translate_opaque, int must_swab, uint64_t *pentry, uint64_t *lowaddr, uint64_t *highaddr, - int elf_machine, int clear_lsb, int data_swab, + uint32_t *pe_flags, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) {@@ -594,6 +595,9 @@ static int glue(load_elf, SZ)(const char *name, int fd, } } +if (pe_flags) { + *pe_flags = (uint32_t )(elf_sword )ehdr.e_flags; + }if (lowaddr) *lowaddr = (uint64_t )(elf_sword )low;if (highaddr)include/hw/loader.h +4
-2@@ -101,6 +101,7 @@ const char *load_elf_strerror(int error);* @pentry: Populated with program entry point. Ignored if NULL. * @lowaddr: Populated with lowest loaded address. Ignored if NULL. * @highaddr: Populated with highest loaded address. Ignored if NULL. +* @pe_flags: Populated with e_flags. Ignore if NULL. * @bigendian: Expected ELF endianness. 0 for LE otherwise BE * @elf_machine: Expected ELF machine type * @clear_lsb: Set to mask off LSB of addresses (Some architectures use @@ -131,8 +132,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int big_endian, - int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t *pe_flags, + int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb);/** load_elf_ram:
[...]
Quoted 56 lines
hw/core/loader.c +8
-7@@ -438,7 +438,7 @@ int load_elf_ram(const char *filename, {return load_elf_ram_sym (filename, elf_note_fn, translate_fn, translate_opaque, - pentry, lowaddr, highaddr, big_endian, + pentry, lowaddr, highaddr,NULL , big_endian, elf_machine, clear_lsb, data_swab, as, load_rom,NULL ); }@@ -448,8 +448,9 @@ int load_elf_ram_sym(const char *filename,uint64_t (*elf_note_fn)(void *,void *,bool ), uint64_t (*translate_fn)(void *, uint64_t), void *translate_opaque, uint64_t *pentry, - uint64_t *lowaddr, uint64_t *highaddr, int big_endian, - int elf_machine, int clear_lsb, int data_swab, + uint64_t *lowaddr, uint64_t *highaddr, uint32_t *pe_flags, + int big_endian, int elf_machine, + int clear_lsb, int data_swab, AddressSpace *as, bool load_rom, symbol_fn_t sym_cb) { int fd, data_order, target_data_order, must_swab, ret = ELF_LOAD_FAILED;@@ -490,13 +491,13 @@ int load_elf_ram_sym(const char *filename,if (e_ident[EI_CLASS ] ==ELFCLASS64 ) { ret =load_elf64 (filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine, clear_lsb, - data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags, elf_machine, + clear_lsb, data_swab, as, load_rom, sym_cb); }else { ret =load_elf32 (filename, fd, elf_note_fn, translate_fn, translate_opaque, must_swab, - pentry, lowaddr, highaddr, elf_machine, clear_lsb, - data_swab, as, load_rom, sym_cb); + pentry, lowaddr, highaddr, pe_flags, elf_machine, + clear_lsb, data_swab, as, load_rom, sym_cb); } fail:hw/riscv/boot.c +1
-1@@ -119,7 +119,7 @@ target_ulong riscv_load_kernel(const char *kernel_filename, symbol_fn_t sym_cb)uint64_t kernel_entry, kernel_high;if (load_elf_ram_sym (kernel_filename,NULL ,NULL ,NULL , - &kernel_entry,NULL , &kernel_high,0 , + &kernel_entry,NULL , &kernel_high,NULL ,0 ,EM_RISCV ,1 ,0 ,NULL , true, sym_cb) >0 ) {return kernel_entry; }
[...]
PATCH v39 16/22 target/avr: Add section about AVR into QEMU documentation
In reply to Michael Rolnik--- qemu-doc.texi | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)
qemu-doc.texi +51 -0
@@ -1742,6 +1742,7 @@ differences are mentioned in the following sections. * Microblaze System emulator:: * SH4 System emulator:: * Xtensa System emulator:: +* AVR System emulator:: @end menu @node PowerPC System emulator
@@ -2515,6 +2516,56 @@ so should only be used with trusted guest OS. @c man end +@node AVR System emulator +@section AVR System emulator +@cindex system emulation (AVR) + +Use the executable @file{qemu-system-avr} to emulates a AVR 8 bit based machine having one for the following cores: avr1, avr2, avr25, avr3, avr31, avr35, avr4, avr5, avr51, avr6, avrtiny, xmega2, xmega3, xmega4, xmega5, xmega6 and xmega7. + +As for now it does not support any real MCUs. However, it does support a "sample" board for educational and testing purposes. This "sample" board hosts USART & 16 bit timer devices and it's enought to run FreeRTOS based applicaton (like this @url{https://github.com/seharris/qemu-avr-tests/blob/master/free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf,,demo}) + +Following are examples of possible usages, assuming program.elf is compiled for AVR cpu +@itemize + +@item Continious non interrupted execution +@example +qemu-system-avr -kernel program.elf +@end example + +@item Continious non interrupted execution with serial output into telnet window +@example +qemu-system-avr -kernel program.elf -serial tcp::5678,server,nowait -nographic +@end example +and then in another shell +@example +telent localhost 5678 +@end example + +@item Continious non interrupted execution with serial output into stdout +@example +qemu-system-avr -kernel program.elf -serial stdio +@end example + +@item Debugging wit GDB debugger +@example +qemu-system-avr -kernel program.elf -s -S +@end example +and then in another shell +@example +avr-gdb program.elf +@end example +and then within GDB shell +@example +target remote :1234 +@end example + +@item Print out executed instructions +@example +qemu-system-avr -kernel program.elf -d in_asm +@end example + +@end itemize + @node QEMU User space emulator @chapter QEMU User space emulator
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 17/22 target/avr: Register AVR support with the rest of QEMU
In reply to Michael RolnikAdd AVR related definitions into QEMU
include/disas/dis-asm.h
--- qapi/machine.json | 3 ++- include/disas/dis-asm.h | 19 +++++++++++++++++++ include/sysemu/arch_init.h | 1 + arch_init.c | 2 ++ 4 files changed, 24 insertions(+), 1 deletion(-)
qapi/machine.json +2 -1
@@ -21,11 +21,12 @@ # is true even for "qemu-system-x86_64". # # ppcemb: dropped in 3.1 +# avr: since 5.0 # # Since: 3.0 ## { 'enum' : 'SysEmuTarget', - 'data' : [ 'aarch64', 'alpha', 'arm', 'cris', 'hppa', 'i386', 'lm32', + 'data' : [ 'aarch64', 'alpha', 'arm', 'avr', 'cris', 'hppa', 'i386', 'lm32', 'm68k', 'microblaze', 'microblazeel', 'mips', 'mips64', 'mips64el', 'mipsel', 'moxie', 'nios2', 'or1k', 'ppc', 'ppc64', 'riscv32', 'riscv64', 's390x', 'sh4',
include/disas/dis-asm.h +19 -0
@@ -211,6 +211,25 @@ enum bfd_architecture#define bfd_mach_m32r 0/* backwards compatibility */ bfd_arch_mn10200, /* Matsushita MN10200 */ bfd_arch_mn10300, /* Matsushita MN10300 */ + bfd_arch_avr, /* Atmel AVR microcontrollers. */ +#define bfd_mach_avr1 1 +#define bfd_mach_avr2 2 +#define bfd_mach_avr25 25 +#define bfd_mach_avr3 3 +#define bfd_mach_avr31 31 +#define bfd_mach_avr35 35 +#define bfd_mach_avr4 4 +#define bfd_mach_avr5 5 +#define bfd_mach_avr51 51 +#define bfd_mach_avr6 6 +#define bfd_mach_avrtiny 100 +#define bfd_mach_avrxmega1 101 +#define bfd_mach_avrxmega2 102 +#define bfd_mach_avrxmega3 103 +#define bfd_mach_avrxmega4 104 +#define bfd_mach_avrxmega5 105 +#define bfd_mach_avrxmega6 106 +#define bfd_mach_avrxmega7 107 bfd_arch_cris, /* Axis CRIS */#define bfd_mach_cris_v0_v10 255#define bfd_mach_cris_v32 32
include/sysemu/arch_init.h +1 -0
@@ -24,6 +24,7 @@ enum {QEMU_ARCH_NIOS2 = (1 <<17 ),QEMU_ARCH_HPPA = (1 <<18 ),QEMU_ARCH_RISCV = (1 <<19 ), + QEMU_ARCH_AVR = (1 << 20), };extern const uint32_t arch_type;
arch_init.c +2 -0
@@ -89,6 +89,8 @@ int graphic_depth = 32;#define QEMU_ARCH QEMU_ARCH_UNICORE32#elif defined(TARGET_XTENSA )#define QEMU_ARCH QEMU_ARCH_XTENSA +#elif defined(TARGET_AVR ) +#define QEMU_ARCH QEMU_ARCH_AVR#endif const uint32_t arch_type =QEMU_ARCH ;
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 18/22 target/avr: Add machine none test
In reply to Michael Rolnik--- tests/machine-none-test.c | 1 + 1 file changed, 1 insertion(+)
tests/machine-none-test.c +1 -0
@@ -27,6 +27,7 @@ static struct arch2cpu cpus_map[] = {/* tested targets list */ { "arm", "cortex-a15" }, { "aarch64", "cortex-a57" }, + { "avr", "avr6-avr-cpu" }, { "x86_64", "qemu64,apic-id=0" }, { "i386", "qemu32,apic-id=0" }, { "alpha", "ev67" },
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 19/22 target/avr: Update build system
In reply to Michael RolnikMake AVR support buildable
--- configure | 7 +++++++ default-configs/avr-softmmu.mak | 5 +++++ target/avr/Makefile.objs | 34 +++++++++++++++++++++++++++++++++ 3 files changed, 46 insertions(+) create mode 100644 default-configs/avr-softmmu.mak create mode 100644 target/avr/Makefile.objs
configure +7 -0
@@ -7602,6 +7602,10 @@ case "$target_name" in mttcg="yes" gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml" ;; + avr) + gdb_xml_files="avr-cpu.xml" + target_compiler=$cross_cc_avr + ;; cris) ;; hppa)
@@ -7821,6 +7825,9 @@ for i in $ARCH $TARGET_BASE_ARCH ; do disas_config "ARM_A64" fi ;; + avr) + disas_config "AVR" + ;; cris) disas_config "CRIS" ;;
default-configs/avr-softmmu.mak new file +5 -0
@@ -0,0 +1,5 @@ +# Default configuration for avr-softmmu + +# Boards: +# +CONFIG_AVR_SAMPLE=y
target/avr/Makefile.objs new file +34 -0
@@ -0,0 +1,34 @@ +# +# QEMU AVR CPU +# +# Copyright (c) 2019 Michael Rolnik +# +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License, or (at your option) any later version. +# +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, see +# <http://www.gnu.org/licenses/lgpl-2.1.html> +# + +DECODETREE = $(SRC_PATH)/scripts/decodetree.py +decode-y = $(SRC_PATH)/target/avr/insn.decode + +target/avr/decode_insn.inc.c: $(decode-y) $(DECODETREE) + $(call quiet-command, \ + $(PYTHON) $(DECODETREE) -o $@ --decode decode_insn --insnwidth 16 $<, \ + "GEN", $(TARGET_DIR)$@) + +target/avr/translate.o: target/avr/decode_insn.inc.c + +obj-y += translate.o cpu.o helper.o +obj-y += gdbstub.o +obj-y += disas.o +obj-$(CONFIG_SOFTMMU) += machine.o
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 20/22 target/avr: Add boot serial test
In reply to Michael RolnikPrint out 'T' through serial port
--- tests/boot-serial-test.c | 10 ++++++++++ tests/Makefile.include | 2 ++ 2 files changed, 12 insertions(+)
tests/boot-serial-test.c +10 -0
@@ -16,6 +16,15 @@#include "qemu/osdep.h" #include "libqtest.h" +static const uint8_t bios_avr[] = { +0x88 ,0xe0 ,/* ldi r24, 0x08 */ +0x80 ,0x93 ,0xc1 ,0x00 ,/* sts 0x00C1, r24 ; Enable tx */ +0x86 ,0xe0 ,/* ldi r24, 0x06 */ +0x80 ,0x93 ,0xc2 ,0x00 ,/* sts 0x00C2, r24 ; Set the data bits to 8 */ +0x84 ,0xe5 ,/* ldi r24, 0x54 */ +0x80 ,0x93 ,0xc6 ,0x00 ,/* sts 0x00C6, r24 ; Output 'T' */ +}; +static const uint8_t kernel_mcf5208[] = {0x41 ,0xf9 ,0xfc ,0x06 ,0x00 ,0x00 ,/* lea 0xfc060000,%a0 */ 0x10 ,0x3c ,0x00 ,0x54 ,/* move.b #'T',%d0 */
@@ -103,6 +112,7 @@ typedef struct testdef {static testdef_t tests[] = { {"alpha" ,"clipper" ,"" ,"PCI:" }, + {"avr" ,"sample" ,"" ,"T" ,sizeof (bios_avr),NULL , bios_avr }, {"ppc" ,"ppce500" ,"" ,"U-Boot" }, {"ppc" ,"40p" ,"-vga none -boot d" ,"Trying cd:," }, {"ppc" ,"g3beige" ,"" ,"PowerPC,750" },
tests/Makefile.include +2 -0
@@ -206,6 +206,8 @@ check-qtest-i386-y += tests/test-x86-cpuid-compat$(EXESUF) check-qtest-i386-y += tests/numa-test$(EXESUF) check-qtest-x86_64-y += $(check-qtest-i386-y) +check-qtest-avr-y += tests/boot-serial-test$(EXESUF) + check-qtest-alpha-y += tests/boot-serial-test$(EXESUF) check-qtest-alpha-$(CONFIG_VGA) += tests/display-vga-test$(EXESUF)
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 21/22 target/avr: Add Avocado test
In reply to Michael RolnikThe test is based on
https://github.com/seharris/qemu-avr-tests/tree/master/free-rtos/Demo
demo which. If working correctly, prints 'ABCDEFGHIJKLMNOPQRSTUVWX' out. it also demostrates that timer and IRQ are working
--- tests/acceptance/machine_avr6.py | 58 ++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 tests/acceptance/machine_avr6.py
tests/acceptance/machine_avr6.py new file +58 -0
@@ -0,0 +1,58 @@ +# +# QEMU AVR +# +# Copyright (c) 2019 Michael Rolnik <[email protected]> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +import logging +import time +import distutils.spawn + +from avocado import skipUnless +from avocado_qemu import Test +from avocado.utils import process + +class AVR6Machine(Test): + timeout = 5 + + def test_freertos(self): + """ + :avocado: tags=arch:avr + :avocado: tags=machine:sample + """ + """ + https://github.com/seharris/qemu-avr-tests/raw/master/free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf + constantly prints out 'ABCDEFGHIJKLMNOPQRSTUVWXABCDEFGHIJKLMNOPQRSTUVWX' + """ + rom_url = 'https://github.com/seharris/qemu-avr-tests' + rom_sha1= '36c3e67b8755dcf37e06af6730ef5d477b8ed16d' + rom_url += '/raw/' + rom_url += rom_sha1 + rom_url += '/free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf' + rom_hash = '7eb521f511ca8f2622e0a3c5e8dd686efbb911d4' + rom_path = self.fetch_asset(rom_url, asset_hash=rom_hash) + + self.vm.set_machine('sample') + self.vm.add_args('-bios', rom_path) + self.vm.add_args('-nographic') + self.vm.launch() + + time.sleep(2) + self.vm.shutdown() + + match = 'ABCDEFGHIJKLMNOPQRSTUVWXABCDEFGHIJKLMNOPQRSTUVWX' + + self.assertIn(match, self.vm.get_log())
Signature · 1 line
2.17.2 (Apple Git-113)
PATCH v39 22/22 target/avr: Update MAINTAINERS file
In reply to Michael RolnikInclude AVR maintaners in MAINTAINERS file
--- MAINTAINERS | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
MAINTAINERS +21 -0
@@ -163,6 +163,27 @@ S: Maintained F: hw/arm/smmu* F: include/hw/arm/smmu* +AVR TCG CPUs +M: Michael Rolnik <[email protected]> +R: Sarah Harris <[email protected]> +S: Maintained +F: target/avr/ +F: tests/acceptance/machine_avr6.py +F: default-configs/avr-softmmu.mak +F: gdb-xml/avr-cpu.xml + +AVR Machines +M: Michael Rolnik <[email protected]> +R: Sarah Harris <[email protected]> +S: Maintained +F: hw/avr/ +F: hw/char/avr_usart.c +F: include/hw/char/avr_usart.h +F: hw/timer/avr_timer16.c +F: include/hw/timer/avr_timer16.h +F: hw/misc/avr_mask.c +F: include/hw/misc/avr_mask.h + CRIS TCG CPUs M: Edgar E. Iglesias <[email protected]> S: Maintained
Signature · 1 line
2.17.2 (Apple Git-113)
Re: [PATCH v39 22/22] target/avr: Update MAINTAINERS file
Quoted 26 lines · Michael Rolnik
Include AVR maintaners in
MAINTAINERSfileSigned-off-by Michael Rolnik <[email protected]>--- MAINTAINERS | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)MAINTAINERS +11
-0@@ -163,6 +163,27 @@ S: Maintained F: hw/arm/smmu* F: include/hw/arm/smmu* +AVR TCG CPUs +M: Michael Rolnik <[email protected]> +R: Sarah Harris <[email protected]> +S: Maintained +F: target/avr/ +F: tests/acceptance/machine_avr6.py +F: default-configs/avr-softmmu.mak +F: gdb-xml/avr-cpu.xml + +AVR Machines +M: Michael Rolnik <[email protected]>
MAINTAINERS S: Maintained · line 186
Quoted 10 lines
MAINTAINERS +10
-0+R: Sarah Harris <[email protected]> +S: Maintained +F: hw/avr/ +F: hw/char/avr_usart.c +F: include/hw/char/avr_usart.h +F: hw/timer/avr_timer16.c +F: include/hw/timer/avr_timer16.h +F: hw/misc/avr_mask.c +F: include/hw/misc/avr_mask.h +
This second section "AVR Machines" is in the wrong place. (Philippe already brought this to your attention, but it looks you did not understand his point.) Please move this section further down the MAINTAINERS file, after "Alpha machines" and "Arm machines". Also, header file and source files are in the wrong order in your list. Headrrs should always preceede source files
Yours,
Aleksandar
Quoted 7 lines
MAINTAINERS +0
-1CRIS TCG CPUs M: Edgar E. Iglesias <[email protected]> S: Maintained --2.17.2 (Apple Git-113)
Quoted 30 lines · Michael Rolnik
This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
runqemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
runtelent localhost 5678
3. Continious non interrupted execution with serial output into stdout runqemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
runqemu-system-avr -kernel program.elf -s -S
runavr-gdb program.elfand then within GDB shell `target remote
:1234`
5. Print out executed instructions
runqemu-system-avr -kernel program.elf -d in_asmthe patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR cores
Quoted 7 lines
avr1
avr2 avr25
avr3 avr31 avr35
avr4
avr5 avr51
avr6
xmega2 xmega4 xmega5 xmega6 xmega7Later on in the series you declare that default AVR core is avr6. This seems to me an unreasonable choice. "avr6" covers only a handful of AVR MCUs. AVR core that is present in by far the largest number of MCUs is "avr5", and "avr5" should be the default AVR core. Unless you have some strong counterargument, please change the default AVR core to "avr5".
Thanks,
Aleksandar
Quoted 389 lines
3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features togetherchanges since v3
1. rampD/X/Y/Z registers are encoded as0x00ff0000(instead of0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed atavr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7.tcg_const_local_i32->tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of0xff- r at COM
11.fixing MULS/MULSU not to modify inputs' content
12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCHchanges since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifyinggen_goto_tbas there is no real paging
5.env->pc->env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removingavr_set_feature
10. SPL/SPH set bug fix
11. switchingstb_phystocpu_stb_data
12. cleaning upavr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)changes since v5
1. BLD bug fix
2. decoder generator is addedchages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_retchanges since v7
1. folding back v6
2. logging athelper_outbandhelper_inbare done for non supported yet registers only
3.MAINTAINERSupdatedchanges since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing ona. Mac, Apple LLVM version 7.0.0 b. Ubuntu 12.04, gcc 4.9.2 c. Fedora 23, gcc 5.3.14. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memorychanges since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7.memory_region_allocate_system_memoryis used to create RAM
8. now there arehelper_fullrd&helper_fullwrwhen LD/ST try to access registerschanges since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changingtlb_fillfunction signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. usingtb->flagsto generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objschanges since v11
1. updating to v2.7.0-rc
2. removing assignment toenv->fullaccfromgen_intermediate_codechanges since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removingtarget-avr/machine.hfile
4.VMSTATE_SINGLE_TEST->VMSTATE_SINGLE
5. comment spelling
6. removinghw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixingavr_cpu_gdb_write_register&avr_cpu_gdb_read_registerfunctions 12.any cpu is removed
12.feature bits are not saved into vm statechanges since v13
1. rebasing to v2.7.0-rc1changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chrischanges since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI asread(helper_inb), modify,write(helper_outb)
3. implementing CBIC/SBIC asread(helper_inb), check, branch
4. adding missingtcg_temp_free_i32fortcg_const_i32changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in themchanges since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation oftranslate.c.I retained the two separate files that could be regenerated from the included cpugen program, but merged in
translate-insn.c. Not that it matters, but the code generated is about 3k smaller.changes since v18
1. moving target-avr into target/avr 2. do not call cpu_exec_initfn function from avr_cpu_initfn 3. call cpu_exec_realizefn avr_cpu_realizefn 4. do not fail sample machine creation if no rom is suplied 5. add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code 6. fix a register getters/setters in machine.c 7. changing QEMU_ARCH_AVR from 1<<17 to 1<<18changes since v19
1. use decodetree.py tool to decode instructions 2. adding USART 3. adding 16 bit timer peripherals 4. changing QEMU_ARCH_AVR from 1<<18 to 1<<20 5. renaming tlb_fill to avr_cpu_tlb_fillchanges since v20
1. use one CPU naming convention 2. merging insn16.decode & insn32.decode files 3. modifying skip next instruction mechanizm 4. translate BREAK as NOP for nowchanges since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a
couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Addgdb-xml/avr-cpu.xmlchanges since v22
1. Rebase
2. Split long commentchanges since v23
1. remove avr_cpu_list_compare function 2. modify avr_cpu_class_by_name function 3. modify avr_cpu_list_entry function 4. modify avr_cpu_list functionchanges since v24
1. removeAVR_CPU_TYPE_NAMEmacrochanges since v25
1. fix patches. every file belong to one patch only 2. change copyright year from 2016 to 2019 3. create mask device to emulate prr0/prr1changes since v26
1. add avocado acceptence test
2. add boot serial testchanges since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/sizechanges since v28
1. rebase
2. fix includes & buildchanges since v29
1. fixing ownership
2. using 'since' instread of 'added in'changes since v30
1. rebasechanges since v31
1. splitting 'Add instruction translation' commit 2. fixing typo in qapi/machine.json sicne -> since 3. removing unintended changes in configure file 4. adding Richard Henderson as a co developer to 'Add instructiontranslation - CPU main translation funcions' commit
changes since v32
1. modifycpu_get_sregto treat sreg C as other flags, except sreg Zchanges since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logicchanges since v34
1. rebasechanges since v35
1. rebase 2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c 3. split "target/avr: Register AVR support with the rest of QEMU" into three patches 1. "target/avr: Register AVR support with the rest of QEMU" 2. "target/avr: Update build system" 3. "target/avr: Update MAINTAINERS file"4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"changes since v36
1. rebase
2. rename1. NO_CPU_REGISTERS -> NUMBER_OF_CPU_REGISTERS 2. NO_IO_REGISTERS -> NUMBER_OF_IO_REGISTERS 3. to_A -> to_regs_16_31_by_one 4. to_B -> to_regs_16_23_by_one 5. to_C -> to_regs_24_30_by_two 6. to_D -> to_regs_00_30_by_two 3. add missing licences 4. add usage example (see above) 5. ass Sarah Harris <[email protected]> as a reviewer to MAINTAINERS 7. use git commit sha1 instead of `master`` in avocado testchanges since v37
1. rebase 2. moving all data transfer instructions into a separate commit 3. splitting tests into 1. avocado test 2. boot serial test 3. machine none test 4. split periperals commit into 1. timer 2. usart 3. mask 5. add function `avr_flags_to_cpu_type` that translates ELF flags into core name 6. add avrtiny, xmega3 cores 7. remove unnecessary includes from target/avr/helper.c file 8. remove empty lines from target/avr/translate.c file 9. set number of interrupt lines to 6410. determine cpu type by reading ELF flags
11. update license of all new files to be LGPL
12. udpate QEMU documentationchanges since v38
1. rebase 2. add examples of AVR emulator invokation into the QEMU doc 3. reorder instructions to match AVR documentation 4. fix elf loader function bug introduced by prev versionMichael Rolnik (22):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Data Transfer Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add limited support for USART peripheral target/avr: Add limited support for 16 bit timer peripheral target/avr: Add dummy mask device
target/avr: Add example board configuration
target/avr: Add section about AVR into QEMU documentation target/avr: Register AVR support with the rest of QEMU target/avr: Add machine none test
target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: UpdateMAINTAINERSfileqemu-doc.texi | 51 + configure | 7 + default-configs/avr-softmmu.mak | 5 + qapi/machine.json | 3 +- include/disas/dis-asm.h | 19 + include/elf.h | 2 + include/hw/char/avr_usart.h | 93 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- include/hw/misc/avr_mask.h | 47 + include/hw/timer/avr_timer16.h | 93 + include/sysemu/arch_init.h | 1 + target/avr/cpu-param.h | 37 + target/avr/cpu-qom.h | 54 + target/avr/cpu.h | 259 +++ target/avr/helper.h | 29 + arch_init.c | 2 + hw/avr/sample.c | 293 +++ hw/char/avr_usart.c | 320 ++++ hw/core/loader.c | 15 +- hw/misc/avr_mask.c | 112 ++ hw/riscv/boot.c | 2 +- hw/timer/avr_timer16.c | 601 ++++++ target/avr/cpu.c | 654 +++++++ target/avr/disas.c | 245 +++ target/avr/gdbstub.c | 84 + target/avr/helper.c | 347 ++++ target/avr/machine.c | 121 ++ target/avr/translate.c | 2921 ++++++++++++++++++++++++++++++ tests/boot-serial-test.c | 10 + tests/machine-none-test.c | 1 + MAINTAINERS | 21 + gdb-xml/avr-cpu.xml | 49 + hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + hw/char/Kconfig | 3 + hw/char/Makefile.objs | 1 + hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + hw/timer/Kconfig | 3 + hw/timer/Makefile.objs | 2 + target/avr/Makefile.objs | 34 + target/avr/insn.decode | 183 ++ tests/Makefile.include | 2 + tests/acceptance/machine_avr6.py | 58 + 46 files changed, 6797 insertions(+), 12 deletions(-) create mode 100644 default-configs/avr-softmmu.mak create mode 100644 include/hw/char/avr_usart.h create mode 100644 include/hw/misc/avr_mask.h create mode 100644 include/hw/timer/avr_timer16.h create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/helper.h create mode 100644 hw/avr/sample.c create mode 100644 hw/char/avr_usart.c create mode 100644 hw/misc/avr_mask.c create mode 100644 hw/timer/avr_timer16.c create mode 100644 target/avr/cpu.c create mode 100644 target/avr/disas.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/helper.c create mode 100644 target/avr/machine.c create mode 100644 target/avr/translate.c create mode 100644 gdb-xml/avr-cpu.xml create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objs create mode 100644 target/avr/Makefile.objs create mode 100644 target/avr/insn.decode create mode 100644 tests/acceptance/machine_avr6.py--
2.17.2 (Apple Git-113)
Hi Aleksandar.
FreeRTOS demo we use uses avr6, that's why we use avr6.
Regards.
Michael Rolnik
Quoted 443 lines · Aleksandar Markovic
Quoted 30 lines · Michael Rolnik
This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
runqemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
runtelent localhost 5678
3. Continious non interrupted execution with serial output into stdout runqemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
runqemu-system-avr -kernel program.elf -s -S
runavr-gdb program.elfand then within GDB shell `target remote
:1234`
5. Print out executed instructions
runqemu-system-avr -kernel program.elf -d in_asmthe patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR coresQuoted 7 lines
avr1 avr2 avr25 avr3 avr31 avr35 avr4 avr5 avr51 avr6 xmega2 xmega4 xmega5 xmega6 xmega7Later on in the series you declare that default AVR core is avr6. This seems to me an unreasonable choice. "avr6" covers only a handful of AVR MCUs. AVR core that is present in by far the largest number of MCUs is "avr5", and "avr5" should be the default AVR core. Unless you have some strong counterargument, please change the default AVR core to "avr5".
Thanks,
AleksandarQuoted 389 lines
3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features togetherchanges since v3
1. rampD/X/Y/Z registers are encoded as0x00ff0000(instead of0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed atavr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7.tcg_const_local_i32->tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of0xff- r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCHchanges since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifyinggen_goto_tbas there is no real paging
5.env->pc->env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removingavr_set_feature
10. SPL/SPH set bug fix
11. switchingstb_phystocpu_stb_data
12. cleaning upavr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)changes since v5
1. BLD bug fix
2. decoder generator is addedchages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_retchanges since v7
1. folding back v6
2. logging athelper_outbandhelper_inbare done for non supported yet registers only
3.MAINTAINERSupdatedchanges since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing ona. Mac, Apple LLVM version 7.0.0 b. Ubuntu 12.04, gcc 4.9.2 c. Fedora 23, gcc 5.3.14. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memorychanges since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7.memory_region_allocate_system_memoryis used to create RAM
8. now there arehelper_fullrd&helper_fullwrwhen LD/ST try to access registerschanges since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changingtlb_fillfunction signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. usingtb->flagsto generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objschanges since v11
1. updating to v2.7.0-rc
2. removing assignment toenv->fullaccfromgen_intermediate_codechanges since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removingtarget-avr/machine.hfile
4.VMSTATE_SINGLE_TEST->VMSTATE_SINGLE
5. comment spelling
6. removinghw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixingavr_cpu_gdb_write_register&avr_cpu_gdb_read_registerfunctions 12.any cpu is removed
12.feature bits are not saved into vm statechanges since v13
1. rebasing to v2.7.0-rc1changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chrischanges since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI asread(helper_inb), modify,write(helper_outb)
3. implementing CBIC/SBIC asread(helper_inb), check, branch
4. adding missingtcg_temp_free_i32fortcg_const_i32changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in themchanges since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation oftranslate.c.I retained the two separate files that could be regenerated from the included cpugen program, but merged in
translate-insn.c. Not that it matters, but the code generated is about 3k smaller.changes since v18
1. moving target-avr into target/avr 2. do not call cpu_exec_initfn function from avr_cpu_initfn 3. call cpu_exec_realizefn avr_cpu_realizefn 4. do not fail sample machine creation if no rom is suplied 5. add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code 6. fix a register getters/setters in machine.c 7. changing QEMU_ARCH_AVR from 1<<17 to 1<<18changes since v19
1. use decodetree.py tool to decode instructions 2. adding USART 3. adding 16 bit timer peripherals 4. changing QEMU_ARCH_AVR from 1<<18 to 1<<20 5. renaming tlb_fill to avr_cpu_tlb_fillchanges since v20
1. use one CPU naming convention 2. merging insn16.decode & insn32.decode files 3. modifying skip next instruction mechanizm 4. translate BREAK as NOP for nowchanges since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a
couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Addgdb-xml/avr-cpu.xmlchanges since v22
1. Rebase
2. Split long commentchanges since v23
1. remove avr_cpu_list_compare function 2. modify avr_cpu_class_by_name function 3. modify avr_cpu_list_entry function 4. modify avr_cpu_list functionchanges since v24
1. removeAVR_CPU_TYPE_NAMEmacrochanges since v25
1. fix patches. every file belong to one patch only 2. change copyright year from 2016 to 2019 3. create mask device to emulate prr0/prr1changes since v26
1. add avocado acceptence test
2. add boot serial testchanges since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/sizechanges since v28
1. rebase
2. fix includes & buildchanges since v29
1. fixing ownership
2. using 'since' instread of 'added in'changes since v30
1. rebasechanges since v31
1. splitting 'Add instruction translation' commit 2. fixing typo in qapi/machine.json sicne -> since 3. removing unintended changes in configure file 4. adding Richard Henderson as a co developer to 'Add instructiontranslation - CPU main translation funcions' commit
changes since v32
1. modifycpu_get_sregto treat sreg C as other flags, except sreg Zchanges since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logicchanges since v34
1. rebasechanges since v35
1. rebase 2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c 3. split "target/avr: Register AVR support with the rest of QEMU" into three patches 1. "target/avr: Register AVR support with the rest of QEMU" 2. "target/avr: Update build system" 3. "target/avr: Update MAINTAINERS file"4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"changes since v36
1. rebase
2. rename1. NO_CPU_REGISTERS -> NUMBER_OF_CPU_REGISTERS 2. NO_IO_REGISTERS -> NUMBER_OF_IO_REGISTERS 3. to_A -> to_regs_16_31_by_one 4. to_B -> to_regs_16_23_by_one 5. to_C -> to_regs_24_30_by_two 6. to_D -> to_regs_00_30_by_two 3. add missing licences 4. add usage example (see above) 5. ass Sarah Harris <[email protected]> as a reviewer to MAINTAINERS 7. use git commit sha1 instead of `master`` in avocado testchanges since v37
1. rebase 2. moving all data transfer instructions into a separate commit 3. splitting tests into 1. avocado test 2. boot serial test 3. machine none test 4. split periperals commit into 1. timer 2. usart 3. mask 5. add function `avr_flags_to_cpu_type` that translates ELF flags into core name 6. add avrtiny, xmega3 cores 7. remove unnecessary includes from target/avr/helper.c file 8. remove empty lines from target/avr/translate.c file 9. set number of interrupt lines to 6410. determine cpu type by reading ELF flags
11. update license of all new files to be LGPL
12. udpate QEMU documentationchanges since v38
1. rebase 2. add examples of AVR emulator invokation into the QEMU doc 3. reorder instructions to match AVR documentation 4. fix elf loader function bug introduced by prev versionMichael Rolnik (22):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Data Transfer Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add limited support for USART peripheral target/avr: Add limited support for 16 bit timer peripheral target/avr: Add dummy mask device
target/avr: Add example board configuration
target/avr: Add section about AVR into QEMU documentation target/avr: Register AVR support with the rest of QEMU target/avr: Add machine none test
target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: UpdateMAINTAINERSfileqemu-doc.texi | 51 + configure | 7 + default-configs/avr-softmmu.mak | 5 + qapi/machine.json | 3 +- include/disas/dis-asm.h | 19 + include/elf.h | 2 + include/hw/char/avr_usart.h | 93 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- include/hw/misc/avr_mask.h | 47 + include/hw/timer/avr_timer16.h | 93 + include/sysemu/arch_init.h | 1 + target/avr/cpu-param.h | 37 + target/avr/cpu-qom.h | 54 + target/avr/cpu.h | 259 +++ target/avr/helper.h | 29 + arch_init.c | 2 + hw/avr/sample.c | 293 +++ hw/char/avr_usart.c | 320 ++++ hw/core/loader.c | 15 +- hw/misc/avr_mask.c | 112 ++ hw/riscv/boot.c | 2 +- hw/timer/avr_timer16.c | 601 ++++++ target/avr/cpu.c | 654 +++++++ target/avr/disas.c | 245 +++ target/avr/gdbstub.c | 84 + target/avr/helper.c | 347 ++++ target/avr/machine.c | 121 ++ target/avr/translate.c | 2921 ++++++++++++++++++++++++++++++ tests/boot-serial-test.c | 10 + tests/machine-none-test.c | 1 + MAINTAINERS | 21 + gdb-xml/avr-cpu.xml | 49 + hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + hw/char/Kconfig | 3 + hw/char/Makefile.objs | 1 + hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + hw/timer/Kconfig | 3 + hw/timer/Makefile.objs | 2 + target/avr/Makefile.objs | 34 + target/avr/insn.decode | 183 ++ tests/Makefile.include | 2 + tests/acceptance/machine_avr6.py | 58 + 46 files changed, 6797 insertions(+), 12 deletions(-) create mode 100644 default-configs/avr-softmmu.mak create mode 100644 include/hw/char/avr_usart.h create mode 100644 include/hw/misc/avr_mask.h create mode 100644 include/hw/timer/avr_timer16.h create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/helper.h create mode 100644 hw/avr/sample.c create mode 100644 hw/char/avr_usart.c create mode 100644 hw/misc/avr_mask.c create mode 100644 hw/timer/avr_timer16.c create mode 100644 target/avr/cpu.c create mode 100644 target/avr/disas.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/helper.c create mode 100644 target/avr/machine.c create mode 100644 target/avr/translate.c create mode 100644 gdb-xml/avr-cpu.xml create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objs create mode 100644 target/avr/Makefile.objs create mode 100644 target/avr/insn.decode create mode 100644 tests/acceptance/machine_avr6.py--
2.17.2 (Apple Git-113)
Signature · 2 lines
Best Regards, Michael Rolnik
Quoted 5 lines · Michael Rolnik
Hi Aleksandar.
FreeRTOS demo we use uses avr6, that's why we use avr6.
Yes, I figured that out, but I think you provide support for ovrerall AVR target, not only for RTOS demo, right? That's why I think the choice of default core should that into consideration what core is the most frequent... and RTOS demo can always use -cpu avr6.
Regards,
Aleksandar
Quoted 458 lines
Regards.
Michael RolnikQuoted 44 lines · Aleksandar Markovic
Quoted 30 lines · Michael Rolnik
This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
runqemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
runtelent localhost 5678
3. Continious non interrupted execution with serial output into stdout runqemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
runqemu-system-avr -kernel program.elf -s -S
runavr-gdb program.elfand then within GDB shell `target remote
:1234`
5. Print out executed instructions
runqemu-system-avr -kernel program.elf -d in_asmthe patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR coresQuoted 7 lines
avr1 avr2 avr25 avr3 avr31 avr35 avr4 avr5 avr51 avr6 xmega2 xmega4 xmega5 xmega6 xmega7Quoted 402 lines
Later on in the series you declare that default AVR core is avr6. This seems to me an unreasonable choice. "avr6" covers only a handful of AVR MCUs. AVR core that is present in by far the largest number of MCUs is "avr5", and "avr5" should be the default AVR core. Unless you have some strong counterargument, please change the default AVR core to "avr5".
Thanks,
AleksandarQuoted 391 lines
3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features togetherchanges since v3
1. rampD/X/Y/Z registers are encoded as0x00ff0000(instead of0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed atavr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7.tcg_const_local_i32->tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of0xff- r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCHchanges since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifyinggen_goto_tbas there is no real paging
5.env->pc->env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removingavr_set_feature
10. SPL/SPH set bug fix
11. switchingstb_phystocpu_stb_data
12. cleaning upavr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)changes since v5
1. BLD bug fix
2. decoder generator is addedchages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_retchanges since v7
1. folding back v6
2. logging athelper_outbandhelper_inbare done for non supported yet registers only
3.MAINTAINERSupdatedchanges since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing ona. Mac, Apple LLVM version 7.0.0 b. Ubuntu 12.04, gcc 4.9.2 c. Fedora 23, gcc 5.3.14. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memorychanges since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7.memory_region_allocate_system_memoryis used to create RAM
8. now there arehelper_fullrd&helper_fullwrwhen LD/ST try to access registerschanges since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changingtlb_fillfunction signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. usingtb->flagsto generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objschanges since v11
1. updating to v2.7.0-rc
2. removing assignment toenv->fullaccfromgen_intermediate_codechanges since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removingtarget-avr/machine.hfile
4.VMSTATE_SINGLE_TEST->VMSTATE_SINGLE
5. comment spelling
6. removinghw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixingavr_cpu_gdb_write_register&avr_cpu_gdb_read_registerfunctions
12.any cpu is removed
12.feature bits are not saved into vm statechanges since v13
1. rebasing to v2.7.0-rc1changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chrischanges since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI asread(helper_inb), modify,write(helper_outb)
3. implementing CBIC/SBIC asread(helper_inb), check, branch
4. adding missingtcg_temp_free_i32fortcg_const_i32changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in themchanges since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation oftranslate.c.I retained the two separate files that could be regenerated from the included cpugen program, but merged in
translate-insn.c. Not that it matters, but the code generated is about 3k smaller.changes since v18
1. moving target-avr into target/avr 2. do not call cpu_exec_initfn function from avr_cpu_initfn 3. call cpu_exec_realizefn avr_cpu_realizefn 4. do not fail sample machine creation if no rom is suplied 5. add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code 6. fix a register getters/setters in machine.c 7. changing QEMU_ARCH_AVR from 1<<17 to 1<<18changes since v19
1. use decodetree.py tool to decode instructions 2. adding USART 3. adding 16 bit timer peripherals 4. changing QEMU_ARCH_AVR from 1<<18 to 1<<20 5. renaming tlb_fill to avr_cpu_tlb_fillchanges since v20
1. use one CPU naming convention 2. merging insn16.decode & insn32.decode files 3. modifying skip next instruction mechanizm 4. translate BREAK as NOP for nowchanges since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes a
couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Addgdb-xml/avr-cpu.xmlchanges since v22
1. Rebase
2. Split long commentchanges since v23
1. remove avr_cpu_list_compare function 2. modify avr_cpu_class_by_name function 3. modify avr_cpu_list_entry function 4. modify avr_cpu_list functionchanges since v24
1. removeAVR_CPU_TYPE_NAMEmacrochanges since v25
1. fix patches. every file belong to one patch only 2. change copyright year from 2016 to 2019 3. create mask device to emulate prr0/prr1changes since v26
1. add avocado acceptence test
2. add boot serial testchanges since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/sizechanges since v28
1. rebase
2. fix includes & buildchanges since v29
1. fixing ownership
2. using 'since' instread of 'added in'changes since v30
1. rebasechanges since v31
1. splitting 'Add instruction translation' commit 2. fixing typo in qapi/machine.json sicne -> since 3. removing unintended changes in configure file 4. adding Richard Henderson as a co developer to 'Add instructiontranslation - CPU main translation funcions' commit
changes since v32
1. modifycpu_get_sregto treat sreg C as other flags, except sreg Zchanges since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logicchanges since v34
1. rebasechanges since v35
1. rebase 2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c 3. split "target/avr: Register AVR support with the rest of QEMU" into three patches 1. "target/avr: Register AVR support with the rest of QEMU" 2. "target/avr: Update build system" 3. "target/avr: Update MAINTAINERS file"4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"changes since v36
1. rebase
2. rename1. NO_CPU_REGISTERS -> NUMBER_OF_CPU_REGISTERS 2. NO_IO_REGISTERS -> NUMBER_OF_IO_REGISTERS 3. to_A -> to_regs_16_31_by_one 4. to_B -> to_regs_16_23_by_one 5. to_C -> to_regs_24_30_by_two 6. to_D -> to_regs_00_30_by_two 3. add missing licences 4. add usage example (see above) 5. ass Sarah Harris <[email protected]> as a reviewer to
MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado testchanges since v37
1. rebase 2. moving all data transfer instructions into a separate commit 3. splitting tests into 1. avocado test 2. boot serial test 3. machine none test 4. split periperals commit into 1. timer 2. usart 3. mask 5. add function `avr_flags_to_cpu_type` that translates ELF flags into core name 6. add avrtiny, xmega3 cores 7. remove unnecessary includes from target/avr/helper.c file 8. remove empty lines from target/avr/translate.c file 9. set number of interrupt lines to 6410. determine cpu type by reading ELF flags
11. update license of all new files to be LGPL
12. udpate QEMU documentationchanges since v38
1. rebase 2. add examples of AVR emulator invokation into the QEMU doc 3. reorder instructions to match AVR documentation 4. fix elf loader function bug introduced by prev versionMichael Rolnik (22):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Data Transfer Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add limited support for USART peripheral target/avr: Add limited support for 16 bit timer peripheral target/avr: Add dummy mask device
target/avr: Add example board configuration
target/avr: Add section about AVR into QEMU documentation target/avr: Register AVR support with the rest of QEMU target/avr: Add machine none test
target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: UpdateMAINTAINERSfileqemu-doc.texi | 51 + configure | 7 + default-configs/avr-softmmu.mak | 5 + qapi/machine.json | 3 +- include/disas/dis-asm.h | 19 + include/elf.h | 2 + include/hw/char/avr_usart.h | 93 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- include/hw/misc/avr_mask.h | 47 + include/hw/timer/avr_timer16.h | 93 + include/sysemu/arch_init.h | 1 + target/avr/cpu-param.h | 37 + target/avr/cpu-qom.h | 54 + target/avr/cpu.h | 259 +++ target/avr/helper.h | 29 + arch_init.c | 2 + hw/avr/sample.c | 293 +++ hw/char/avr_usart.c | 320 ++++ hw/core/loader.c | 15 +- hw/misc/avr_mask.c | 112 ++ hw/riscv/boot.c | 2 +- hw/timer/avr_timer16.c | 601 ++++++ target/avr/cpu.c | 654 +++++++ target/avr/disas.c | 245 +++ target/avr/gdbstub.c | 84 + target/avr/helper.c | 347 ++++ target/avr/machine.c | 121 ++ target/avr/translate.c | 2921 ++++++++++++++++++++++++++++++ tests/boot-serial-test.c | 10 + tests/machine-none-test.c | 1 + MAINTAINERS | 21 + gdb-xml/avr-cpu.xml | 49 + hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + hw/char/Kconfig | 3 + hw/char/Makefile.objs | 1 + hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + hw/timer/Kconfig | 3 + hw/timer/Makefile.objs | 2 + target/avr/Makefile.objs | 34 + target/avr/insn.decode | 183 ++ tests/Makefile.include | 2 + tests/acceptance/machine_avr6.py | 58 + 46 files changed, 6797 insertions(+), 12 deletions(-) create mode 100644 default-configs/avr-softmmu.mak create mode 100644 include/hw/char/avr_usart.h create mode 100644 include/hw/misc/avr_mask.h create mode 100644 include/hw/timer/avr_timer16.h create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/helper.h create mode 100644 hw/avr/sample.c create mode 100644 hw/char/avr_usart.c create mode 100644 hw/misc/avr_mask.c create mode 100644 hw/timer/avr_timer16.c create mode 100644 target/avr/cpu.c create mode 100644 target/avr/disas.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/helper.c create mode 100644 target/avr/machine.c create mode 100644 target/avr/translate.c create mode 100644 gdb-xml/avr-cpu.xml create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objs create mode 100644 target/avr/Makefile.objs create mode 100644 target/avr/insn.decode create mode 100644 tests/acceptance/machine_avr6.py--
2.17.2 (Apple Git-113)--
Best Regards,
Michael Rolnik
but this is a sample board that has some ATmega2560 devices and its avr6 core
Quoted 480 lines · Aleksandar Markovic
Quoted 5 lines · Michael Rolnik
Hi Aleksandar.
FreeRTOS demo we use uses avr6, that's why we use avr6.
Yes, I figured that out, but I think you provide support for ovrerall AVR target, not only for RTOS demo, right? That's why I think the choice of default core should that into consideration what core is the most frequent... and RTOS demo can always use -cpu avr6.
Regards,
AleksandarQuoted 460 lines
Regards.
Michael RolnikQuoted 45 lines · Aleksandar Markovic
Quoted 31 lines · Michael Rolnik
This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
runqemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
runtelent localhost 5678
3. Continious non interrupted execution with serial output into stdout runqemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
runqemu-system-avr -kernel program.elf -s -S
runavr-gdb program.elfand then within GDB shell `target remote
:1234`
5. Print out executed instructions
runqemu-system-avr -kernel program.elf -d in_asmthe patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR coresQuoted 7 lines
avr1 avr2 avr25 avr3 avr31 avr35 avr4 avr5 avr51 avr6 xmega2 xmega4 xmega5 xmega6 xmega7Quoted 403 lines
Later on in the series you declare that default AVR core is avr6. This seems to me an unreasonable choice. "avr6" covers only a handful of AVR MCUs. AVR core that is present in by far the largest number of MCUs is "avr5", and "avr5" should be the default AVR core. Unless you have some strong counterargument, please change the default AVR core to "avr5".
Thanks,
AleksandarQuoted 392 lines
3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features togetherchanges since v3
1. rampD/X/Y/Z registers are encoded as0x00ff0000(instead of0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed atavr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7.tcg_const_local_i32->tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of0xff- r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCHchanges since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifyinggen_goto_tbas there is no real paging
5.env->pc->env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removingavr_set_feature
10. SPL/SPH set bug fix
11. switchingstb_phystocpu_stb_data
12. cleaning upavr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)changes since v5
1. BLD bug fix
2. decoder generator is addedchages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_retchanges since v7
1. folding back v6
2. logging athelper_outbandhelper_inbare done for non supported yet registers only
3.MAINTAINERSupdatedchanges since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing ona. Mac, Apple LLVM version 7.0.0 b. Ubuntu 12.04, gcc 4.9.2 c. Fedora 23, gcc 5.3.14. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memorychanges since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7.memory_region_allocate_system_memoryis used to create RAM
8. now there arehelper_fullrd&helper_fullwrwhen LD/ST try to access registerschanges since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changingtlb_fillfunction signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. usingtb->flagsto generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objschanges since v11
1. updating to v2.7.0-rc
2. removing assignment toenv->fullaccfromgen_intermediate_codechanges since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removingtarget-avr/machine.hfile
4.VMSTATE_SINGLE_TEST->VMSTATE_SINGLE
5. comment spelling
6. removinghw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixingavr_cpu_gdb_write_register&avr_cpu_gdb_read_registerfunctions
12.any cpu is removed
12.feature bits are not saved into vm statechanges since v13
1. rebasing to v2.7.0-rc1changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chrischanges since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI asread(helper_inb), modify,write(helper_outb)
3. implementing CBIC/SBIC asread(helper_inb), check, branch
4. adding missingtcg_temp_free_i32fortcg_const_i32changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in themchanges since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation oftranslate.c.I retained the two separate files that could be regenerated from the included cpugen program, but merged in
translate-insn.c. Not that it matters, but the code generated is about 3k smaller.changes since v18
1. moving target-avr into target/avr 2. do not call cpu_exec_initfn function from avr_cpu_initfn 3. call cpu_exec_realizefn avr_cpu_realizefn 4. do not fail sample machine creation if no rom is suplied 5. add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code 6. fix a register getters/setters in machine.c 7. changing QEMU_ARCH_AVR from 1<<17 to 1<<18changes since v19
1. use decodetree.py tool to decode instructions 2. adding USART 3. adding 16 bit timer peripherals 4. changing QEMU_ARCH_AVR from 1<<18 to 1<<20 5. renaming tlb_fill to avr_cpu_tlb_fillchanges since v20
1. use one CPU naming convention 2. merging insn16.decode & insn32.decode files 3. modifying skip next instruction mechanizm 4. translate BREAK as NOP for nowchanges since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes
a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Addgdb-xml/avr-cpu.xmlchanges since v22
1. Rebase
2. Split long commentchanges since v23
1. remove avr_cpu_list_compare function 2. modify avr_cpu_class_by_name function 3. modify avr_cpu_list_entry function 4. modify avr_cpu_list functionchanges since v24
1. removeAVR_CPU_TYPE_NAMEmacrochanges since v25
1. fix patches. every file belong to one patch only 2. change copyright year from 2016 to 2019 3. create mask device to emulate prr0/prr1changes since v26
1. add avocado acceptence test
2. add boot serial testchanges since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/sizechanges since v28
1. rebase
2. fix includes & buildchanges since v29
1. fixing ownership
2. using 'since' instread of 'added in'changes since v30
1. rebasechanges since v31
1. splitting 'Add instruction translation' commit 2. fixing typo in qapi/machine.json sicne -> since 3. removing unintended changes in configure file 4. adding Richard Henderson as a co developer to 'Add instructiontranslation - CPU main translation funcions' commit
changes since v32
1. modifycpu_get_sregto treat sreg C as other flags, except sreg Zchanges since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logicchanges since v34
1. rebasechanges since v35
1. rebase 2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c 3. split "target/avr: Register AVR support with the rest of QEMU" into three patches 1. "target/avr: Register AVR support with the rest of QEMU" 2. "target/avr: Update build system" 3. "target/avr: Update MAINTAINERS file"4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"changes since v36
1. rebase
2. rename1. NO_CPU_REGISTERS -> NUMBER_OF_CPU_REGISTERS 2. NO_IO_REGISTERS -> NUMBER_OF_IO_REGISTERS 3. to_A -> to_regs_16_31_by_one 4. to_B -> to_regs_16_23_by_one 5. to_C -> to_regs_24_30_by_two 6. to_D -> to_regs_00_30_by_two 3. add missing licences 4. add usage example (see above) 5. ass Sarah Harris <[email protected]> as a reviewer to
MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado testchanges since v37
1. rebase 2. moving all data transfer instructions into a separate commit 3. splitting tests into 1. avocado test 2. boot serial test 3. machine none test 4. split periperals commit into 1. timer 2. usart 3. mask 5. add function `avr_flags_to_cpu_type` that translates ELF flags into core name 6. add avrtiny, xmega3 cores 7. remove unnecessary includes from target/avr/helper.c file 8. remove empty lines from target/avr/translate.c file 9. set number of interrupt lines to 6410. determine cpu type by reading ELF flags
11. update license of all new files to be LGPL
12. udpate QEMU documentationchanges since v38
1. rebase 2. add examples of AVR emulator invokation into the QEMU doc 3. reorder instructions to match AVR documentation 4. fix elf loader function bug introduced by prev versionMichael Rolnik (22):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Data Transfer Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add limited support for USART peripheral target/avr: Add limited support for 16 bit timer peripheral target/avr: Add dummy mask device
target/avr: Add example board configuration
target/avr: Add section about AVR into QEMU documentation target/avr: Register AVR support with the rest of QEMU target/avr: Add machine none test
target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: UpdateMAINTAINERSfileqemu-doc.texi | 51 + configure | 7 + default-configs/avr-softmmu.mak | 5 + qapi/machine.json | 3 +- include/disas/dis-asm.h | 19 + include/elf.h | 2 + include/hw/char/avr_usart.h | 93 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- include/hw/misc/avr_mask.h | 47 + include/hw/timer/avr_timer16.h | 93 + include/sysemu/arch_init.h | 1 + target/avr/cpu-param.h | 37 + target/avr/cpu-qom.h | 54 + target/avr/cpu.h | 259 +++ target/avr/helper.h | 29 + arch_init.c | 2 + hw/avr/sample.c | 293 +++ hw/char/avr_usart.c | 320 ++++ hw/core/loader.c | 15 +- hw/misc/avr_mask.c | 112 ++ hw/riscv/boot.c | 2 +- hw/timer/avr_timer16.c | 601 ++++++ target/avr/cpu.c | 654 +++++++ target/avr/disas.c | 245 +++ target/avr/gdbstub.c | 84 + target/avr/helper.c | 347 ++++ target/avr/machine.c | 121 ++ target/avr/translate.c | 2921 ++++++++++++++++++++++++++++++ tests/boot-serial-test.c | 10 + tests/machine-none-test.c | 1 + MAINTAINERS | 21 + gdb-xml/avr-cpu.xml | 49 + hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + hw/char/Kconfig | 3 + hw/char/Makefile.objs | 1 + hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + hw/timer/Kconfig | 3 + hw/timer/Makefile.objs | 2 + target/avr/Makefile.objs | 34 + target/avr/insn.decode | 183 ++ tests/Makefile.include | 2 + tests/acceptance/machine_avr6.py | 58 + 46 files changed, 6797 insertions(+), 12 deletions(-) create mode 100644 default-configs/avr-softmmu.mak create mode 100644 include/hw/char/avr_usart.h create mode 100644 include/hw/misc/avr_mask.h create mode 100644 include/hw/timer/avr_timer16.h create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/helper.h create mode 100644 hw/avr/sample.c create mode 100644 hw/char/avr_usart.c create mode 100644 hw/misc/avr_mask.c create mode 100644 hw/timer/avr_timer16.c create mode 100644 target/avr/cpu.c create mode 100644 target/avr/disas.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/helper.c create mode 100644 target/avr/machine.c create mode 100644 target/avr/translate.c create mode 100644 gdb-xml/avr-cpu.xml create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objs create mode 100644 target/avr/Makefile.objs create mode 100644 target/avr/insn.decode create mode 100644 tests/acceptance/machine_avr6.py--
2.17.2 (Apple Git-113)--
Best Regards,
Michael Rolnik
Signature · 2 lines
Best Regards, Michael Rolnik
Quoted 5 lines · Michael Rolnik
but this is a sample board that has some ATmega2560 devices and its avr6 core
Quoted 2 lines
avr6 core is much less represented in real boards than avr5 core - thetefore it shouldn't be the default - you series is not titled "Demo of RTOS on AVR", but "AVR 8- bit cores in QEMU".
Yours, Aleksandar
Quoted 488 lines
Quoted 9 lines · Aleksandar Markovic
Quoted 5 lines · Michael Rolnik
Hi Aleksandar.
FreeRTOS demo we use uses avr6, that's why we use avr6.
Quoted 471 lines
Yes, I figured that out, but I think you provide support for ovrerall AVR target, not only for RTOS demo, right? That's why I think the choice of default core should that into consideration what core is the most frequent... and RTOS demo can always use -cpu avr6.
Regards,
AleksandarQuoted 460 lines
Regards.
Michael RolnikQuoted 45 lines · Aleksandar Markovic
Quoted 31 lines · Michael Rolnik
This series of patches adds 8bit AVR cores to QEMU.
All instruction, except BREAK/DES/SPM/SPMX, are implemented. Not fully tested yet.
However I was able to execute simple code with functions. e.g fibonacci calculation.
This series of patches include a non real, sample board.
No fuses support yet. PC is set to 0 at reset.Following are examples of possible usages, assuming program.elf is compiled for AVR cpu
1. Continious non interrupted execution
runqemu-system-avr -kernel program.elf
2. Continious non interrupted execution with serial output into telnet window
run `qemu-system-avr -kernel program.elf -serial
tcp::5678,server,nowait -nographic `
runtelent localhost 5678
3. Continious non interrupted execution with serial output into stdout runqemu-system-avr -kernel program.elf -serial stdio
4. Debugging wit GDB debugger
runqemu-system-avr -kernel program.elf -s -S
runavr-gdb program.elfand then within GDB shell `target remote
:1234`
5. Print out executed instructions
runqemu-system-avr -kernel program.elf -d in_asmthe patches include the following
1. just a basic 8bit AVR CPU, without instruction decoding or translation
2. CPU features which allow define the following 8bit AVR coresQuoted 7 lines
avr1 avr2 avr25 avr3 avr31 avr35 avr4 avr5 avr51 avr6 xmega2 xmega4 xmega5 xmega6 xmega7Quoted 403 lines
Later on in the series you declare that default AVR core is avr6. This seems to me an unreasonable choice. "avr6" covers only a handful of AVR MCUs. AVR core that is present in by far the largest number of MCUs is "avr5", and "avr5" should be the default AVR core. Unless you have some strong counterargument, please change the default AVR core to "avr5".
Thanks,
AleksandarQuoted 392 lines
3. a definition of sample machine with SRAM, FLASH and CPU which allows to execute simple code
4. encoding for all AVR instructions
5. interrupt handling
6. helpers for IN, OUT, SLEEP, WBR & unsupported instructions
7. a decoder which given an opcode decides what istruction it is
8. translation of AVR instruction into TCG
9. all features togetherchanges since v3
1. rampD/X/Y/Z registers are encoded as0x00ff0000(instead of0x000000ff) for faster address manipulaton
2. ffs changed to ctz32
3. duplicate code removed atavr_cpu_do_interrupt
4. using andc instead of not + and
5. fixing V flag calculation in varios instructions
6. freeing local variables in PUSH
7.tcg_const_local_i32->tcg_const_i32
8. using sextract32 instead of my implementation
9. fixing BLD instruction
10.xor(r) instead of0xff- r at COM
11.fixing MULS/MULSU not to modify inputs' content 12.using SUB for NEG
13.fixing tcg_gen_qemu_ld/st call in XCHchanges since v4
1. target is now defined as big endian in order to optimize push_ret/pop_ret
2. all style warnings are fixed
3. adding cpu_set/get_sreg functions
4. simplifyinggen_goto_tbas there is no real paging
5.env->pc->env->pc_w
6. making flag dump more compact
7. more spacing
8. renaming CODE/DATA_INDEX -> MMU_CODE/DATA_IDX
9. removingavr_set_feature
10. SPL/SPH set bug fix
11. switchingstb_phystocpu_stb_data
12. cleaning upavr_decode
13. saving sreg, rampD/X/Y/Z, eind in HW format (savevm)
14. saving CPU features (savevm)changes since v5
1. BLD bug fix
2. decoder generator is addedchages since v6
1. using cpu_get_sreg/cpu_set_sreg in avr_cpu_gdb_read_register/avr_cpu_gdb_write_register
2. configure the target as little endian because otherwise GDB does not work
3. fixing and testing gen_push_ret/gen_pop_retchanges since v7
1. folding back v6
2. logging athelper_outbandhelper_inbare done for non supported yet registers only
3.MAINTAINERSupdatedchanges since v8
1. removing hw/avr from hw/Makefile.obj as it should not be built for all
2. making linux compilable
3. testing ona. Mac, Apple LLVM version 7.0.0 b. Ubuntu 12.04, gcc 4.9.2 c. Fedora 23, gcc 5.3.14. folding back some patches
5. translation bug fixes for ORI, CPI, XOR instructions
6. propper handling of cpu register writes though memorychanges since v9
1. removing forward declarations of static functions
2. disabling debug prints
3. switching to case range instead of if else if ...
4. LD/ST IN/OUT accessing CPU maintainder registers are not routed to any device
5. commenst about sample board and sample IO device added
6. sample board description is more descriptive now
7.memory_region_allocate_system_memoryis used to create RAM
8. now there arehelper_fullrd&helper_fullwrwhen LD/ST try to access registerschanges since v10
1. movig back fullwr & fullrd into the commit where outb and inb were introduced
2. changingtlb_fillfunction signature
3. adding empty line between functions
4. adding newline on the last line of the file
5. usingtb->flagsto generae full access ST/LD instructions
6. fixing SBRC bug
7. folding back 10th commit
8. whenever a new file is introduced it's added to Makefile.objschanges since v11
1. updating to v2.7.0-rc
2. removing assignment toenv->fullaccfromgen_intermediate_codechanges since v12
1. fixing spacing
2. fixing get/put_segment functions
3. removingtarget-avr/machine.hfile
4.VMSTATE_SINGLE_TEST->VMSTATE_SINGLE
5. comment spelling
6. removinghw/avr/sample_io.c
7. char const* -> const char*
8. proper ram allocation
9. fixing breakpoint functionality.
10.env1 -> env
11.fixingavr_cpu_gdb_write_register&avr_cpu_gdb_read_registerfunctions
12.any cpu is removed
12.feature bits are not saved into vm statechanges since v13
1. rebasing to v2.7.0-rc1changes since v14
1. I made self review with git gui tool. (I did not know such a thing exists)
2. removing all double/tripple spaces
3. removing comment reference to SampleIO
4. folding back some changes, so there is not deleted lines in my code
5. moving avr configuration, within configure file, before chrischanges since v15
1. removing IO registers cache from CPU
2. implementing CBI/SBI asread(helper_inb), modify,write(helper_outb)
3. implementing CBIC/SBIC asread(helper_inb), check, branch
4. adding missingtcg_temp_free_i32fortcg_const_i32changes since v16
1. removing EXT IO registers knoledge from CPU. These registers are accessible
by LD/ST only. CPU has no interest in themchanges since v17 (by Richard Henderson)
This is Michael's v17, with some adjustments of my own:1. Fix the whitespace errors reported by "git am",
2. Replace the utf-8 characters with normal ascii,
3. Ditch the separate compilation oftranslate.c.I retained the two separate files that could be regenerated from the included cpugen program, but merged in
translate-insn.c. Not that it matters, but the code generated is about 3k smaller.changes since v18
1. moving target-avr into target/avr 2. do not call cpu_exec_initfn function from avr_cpu_initfn 3. call cpu_exec_realizefn avr_cpu_realizefn 4. do not fail sample machine creation if no rom is suplied 5. add tcg_gen_exit_tb(0) for BS_BRANCH in gen_intermediate_code 6. fix a register getters/setters in machine.c 7. changing QEMU_ARCH_AVR from 1<<17 to 1<<18changes since v19
1. use decodetree.py tool to decode instructions 2. adding USART 3. adding 16 bit timer peripherals 4. changing QEMU_ARCH_AVR from 1<<18 to 1<<20 5. renaming tlb_fill to avr_cpu_tlb_fillchanges since v20
1. use one CPU naming convention 2. merging insn16.decode & insn32.decode files 3. modifying skip next instruction mechanizm 4. translate BREAK as NOP for nowchanges since v21
1. Reorganize bstate.
This will make transition to <exec/translator.h> easier, and fixes
a couple of bugs wrt single stepping
by [email protected]
2. Drop cpc and fix page cross condition.
by [email protected]
3. Refactor checking supported/unsupported instructions
4. Addgdb-xml/avr-cpu.xmlchanges since v22
1. Rebase
2. Split long commentchanges since v23
1. remove avr_cpu_list_compare function 2. modify avr_cpu_class_by_name function 3. modify avr_cpu_list_entry function 4. modify avr_cpu_list functionchanges since v24
1. removeAVR_CPU_TYPE_NAMEmacrochanges since v25
1. fix patches. every file belong to one patch only 2. change copyright year from 2016 to 2019 3. create mask device to emulate prr0/prr1changes since v26
1. add avocado acceptence test
2. add boot serial testchanges since v27
1. list atmel2560 devices as unimplemented
2. fix sram base/sizechanges since v28
1. rebase
2. fix includes & buildchanges since v29
1. fixing ownership
2. using 'since' instread of 'added in'changes since v30
1. rebasechanges since v31
1. splitting 'Add instruction translation' commit 2. fixing typo in qapi/machine.json sicne -> since 3. removing unintended changes in configure file 4. adding Richard Henderson as a co developer to 'Add instructiontranslation - CPU main translation funcions' commit
changes since v32
1. modifycpu_get_sregto treat sreg C as other flags, except sreg Zchanges since v33
1. ensure flag C is always calculated as one bit
2. calculate flag Z as one bit, without using inverse logicchanges since v34
1. rebasechanges since v35
1. rebase 2. use NANOSECONDS_PER_SECOND instead of 1000000000 in avr_timer16.c 3. split "target/avr: Register AVR support with the rest of QEMU" into three patches 1. "target/avr: Register AVR support with the rest of QEMU" 2. "target/avr: Update build system" 3. "target/avr: Update MAINTAINERS file"4. split "target/avr: Add tests" patch into two patches
1. "target/avr: Add Avocado test"
2. "target/avr: Add boot serial test"
5. Add instruction disassembly function
6. change "since 4.2" to "since 5.0"changes since v36
1. rebase
2. rename1. NO_CPU_REGISTERS -> NUMBER_OF_CPU_REGISTERS 2. NO_IO_REGISTERS -> NUMBER_OF_IO_REGISTERS 3. to_A -> to_regs_16_31_by_one 4. to_B -> to_regs_16_23_by_one 5. to_C -> to_regs_24_30_by_two 6. to_D -> to_regs_00_30_by_two 3. add missing licences 4. add usage example (see above) 5. ass Sarah Harris <[email protected]> as a reviewer to
MAINTAINERS
7. use git commit sha1 instead of `master`` in avocado testchanges since v37
1. rebase 2. moving all data transfer instructions into a separate commit 3. splitting tests into 1. avocado test 2. boot serial test 3. machine none test 4. split periperals commit into 1. timer 2. usart 3. mask 5. add function `avr_flags_to_cpu_type` that translates ELF flags into core name 6. add avrtiny, xmega3 cores 7. remove unnecessary includes from target/avr/helper.c file 8. remove empty lines from target/avr/translate.c file 9. set number of interrupt lines to 6410. determine cpu type by reading ELF flags
11. update license of all new files to be LGPL
12. udpate QEMU documentationchanges since v38
1. rebase 2. add examples of AVR emulator invokation into the QEMU doc 3. reorder instructions to match AVR documentation 4. fix elf loader function bug introduced by prev versionMichael Rolnik (22):
target/avr: Add outward facing interfaces and core CPU logic target/avr: Add instruction helpers
target/avr: Add instruction decoding
target/avr: Add instruction translation - Registers definition target/avr: Add instruction translation - Arithmetic and Logic
Instructions
target/avr: Add instruction translation - Branch Instructions target/avr: Add instruction translation - Data Transfer Instructions target/avr: Add instruction translation - Bit and Bit-test
Instructions
target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - CPU main translation
function
target/avr: Add instruction disassembly function target/avr: Add limited support for USART peripheral target/avr: Add limited support for 16 bit timer peripheral target/avr: Add dummy mask device
target/avr: Add example board configuration
target/avr: Add section about AVR into QEMU documentation target/avr: Register AVR support with the rest of QEMU target/avr: Add machine none test
target/avr: Update build system
target/avr: Add boot serial test
target/avr: Add Avocado test
target/avr: UpdateMAINTAINERSfileqemu-doc.texi | 51 + configure | 7 + default-configs/avr-softmmu.mak | 5 + qapi/machine.json | 3 +- include/disas/dis-asm.h | 19 + include/elf.h | 2 + include/hw/char/avr_usart.h | 93 + include/hw/elf_ops.h | 6 +- include/hw/loader.h | 6 +- include/hw/misc/avr_mask.h | 47 + include/hw/timer/avr_timer16.h | 93 + include/sysemu/arch_init.h | 1 + target/avr/cpu-param.h | 37 + target/avr/cpu-qom.h | 54 + target/avr/cpu.h | 259 +++ target/avr/helper.h | 29 + arch_init.c | 2 + hw/avr/sample.c | 293 +++ hw/char/avr_usart.c | 320 ++++ hw/core/loader.c | 15 +- hw/misc/avr_mask.c | 112 ++ hw/riscv/boot.c | 2 +- hw/timer/avr_timer16.c | 601 ++++++ target/avr/cpu.c | 654 +++++++ target/avr/disas.c | 245 +++ target/avr/gdbstub.c | 84 + target/avr/helper.c | 347 ++++ target/avr/machine.c | 121 ++ target/avr/translate.c | 2921 ++++++++++++++++++++++++++++++ tests/boot-serial-test.c | 10 + tests/machine-none-test.c | 1 + MAINTAINERS | 21 + gdb-xml/avr-cpu.xml | 49 + hw/Kconfig | 1 + hw/avr/Kconfig | 6 + hw/avr/Makefile.objs | 1 + hw/char/Kconfig | 3 + hw/char/Makefile.objs | 1 + hw/misc/Kconfig | 3 + hw/misc/Makefile.objs | 2 + hw/timer/Kconfig | 3 + hw/timer/Makefile.objs | 2 + target/avr/Makefile.objs | 34 + target/avr/insn.decode | 183 ++ tests/Makefile.include | 2 + tests/acceptance/machine_avr6.py | 58 + 46 files changed, 6797 insertions(+), 12 deletions(-) create mode 100644 default-configs/avr-softmmu.mak create mode 100644 include/hw/char/avr_usart.h create mode 100644 include/hw/misc/avr_mask.h create mode 100644 include/hw/timer/avr_timer16.h create mode 100644 target/avr/cpu-param.h create mode 100644 target/avr/cpu-qom.h create mode 100644 target/avr/cpu.h create mode 100644 target/avr/helper.h create mode 100644 hw/avr/sample.c create mode 100644 hw/char/avr_usart.c create mode 100644 hw/misc/avr_mask.c create mode 100644 hw/timer/avr_timer16.c create mode 100644 target/avr/cpu.c create mode 100644 target/avr/disas.c create mode 100644 target/avr/gdbstub.c create mode 100644 target/avr/helper.c create mode 100644 target/avr/machine.c create mode 100644 target/avr/translate.c create mode 100644 gdb-xml/avr-cpu.xml create mode 100644 hw/avr/Kconfig create mode 100644 hw/avr/Makefile.objs create mode 100644 target/avr/Makefile.objs create mode 100644 target/avr/insn.decode create mode 100644 tests/acceptance/machine_avr6.py--
2.17.2 (Apple Git-113)--
Best Regards,
Michael Rolnik--
Best Regards,
Michael Rolnik